kernel/git/stable/linux-stable.git/drivers/video/backlight, branch linux-5.7.y

backlight: lp855x: Ensure regulators are disabled on probe failure

2020-06-24T15:48:18+00:00

[ Upstream commit d8207c155a7c6015eb7f43739baa7dfb1fa638af ] If probing the LP885x backlight fails after the regulators have been enabled, then the following warning is seen when releasing the regulators ... WARNING: CPU: 1 PID: 289 at drivers/regulator/core.c:2051 _regulator_put.part.28+0x158/0x160 Modules linked in: tegra_xudc lp855x_bl(+) host1x pwm_tegra ip_tables x_tables ipv6 nf_defrag_ipv6 CPU: 1 PID: 289 Comm: systemd-udevd Not tainted 5.6.0-rc2-next-20200224 #1 Hardware name: NVIDIA Jetson TX1 Developer Kit (DT) ... Call trace: _regulator_put.part.28+0x158/0x160 regulator_put+0x34/0x50 devm_regulator_release+0x10/0x18 release_nodes+0x12c/0x230 devres_release_all+0x34/0x50 really_probe+0x1c0/0x370 driver_probe_device+0x58/0x100 device_driver_attach+0x6c/0x78 __driver_attach+0xb0/0xf0 bus_for_each_dev+0x68/0xc8 driver_attach+0x20/0x28 bus_add_driver+0x160/0x1f0 driver_register+0x60/0x110 i2c_register_driver+0x40/0x80 lp855x_driver_init+0x20/0x1000 [lp855x_bl] do_one_initcall+0x58/0x1a0 do_init_module+0x54/0x1d0 load_module+0x1d80/0x21c8 __do_sys_finit_module+0xe8/0x100 __arm64_sys_finit_module+0x18/0x20 el0_svc_common.constprop.3+0xb0/0x168 do_el0_svc+0x20/0x98 el0_sync_handler+0xf4/0x1b0 el0_sync+0x140/0x180 Fix this by ensuring that the regulators are disabled, if enabled, on probe failure. Finally, ensure that the vddio regulator is disabled in the driver remove handler. Signed-off-by: Jon Hunter Reviewed-by: Daniel Thompson Signed-off-by: Lee Jones Signed-off-by: Sasha Levin

Merge tag 'backlight-next-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight

2020-04-08T02:44:52+00:00

Pull backlight updates from Lee Jones: "Switch pwm_bl and corgi_lcd drivers to use GPIO descriptors" * tag 'backlight-next-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: corgi: Convert to use GPIO descriptors backlight: pwm_bl: Switch to full GPIO descriptor

backlight: corgi: Convert to use GPIO descriptors

2020-03-25T09:30:46+00:00

The code in the Corgi backlight driver can be considerably simplified by moving to GPIO descriptors and lookup tables from the board files instead of passing GPIO numbers using the old API. Make sure to encode inversion semantics for the Akita and Spitz platforms inside the GPIO lookup table and drop the custom inversion semantics from the driver. All in-tree users are converted in this patch. Signed-off-by: Linus Walleij Acked-by: Robert Jarzmik Reviewed-by: Daniel Thompson Signed-off-by: Lee Jones

backlight: pwm_bl: Switch to full GPIO descriptor

2020-03-18T15:05:57+00:00

The PWM backlight still supports passing a enable GPIO line as platform data using the legacy API. It turns out that ever board using this mechanism except one is pass .enable_gpio = -1. So we drop all these cargo-culted -1's from all instances of this platform data in the kernel. The remaning board, Palm TC, is converted to pass a machine descriptior table with the "enable" GPIO instead, and delete the platform data entry for enable_gpio and the code handling it and things should work smoothly with the new API. Signed-off-by: Linus Walleij Acked-by: Robert Jarzmik Acked-by: Krzysztof Kozlowski Reviewed-by: Daniel Thompson Signed-off-by: Lee Jones

Merge v5.6-rc5 into drm-next

2020-03-10T21:27:21+00:00

Requested my mripard for some misc patches that need this as a base. Signed-off-by: Dave Airlie

Merge tag 'drm-misc-next-2020-02-10' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

2020-02-20T19:44:40+00:00

drm-misc-next for 5.7: UAPI Changes: - lima: Add support for heap buffers Cross-subsystem Changes: Core Changes: - Implement mode_config mode_valid for memory constrained drivers - Bus format negociation between bridges - Consolidate fake vblank events for drivers without vblank interrupts - drm/bufs: dma_alloc related cleanups - drm/dp_mst: Various fixes - drm/print: New drm_device based print helpers - Thomas is a drm-misc maintainer now! Driver Changes: - DPMS cleanups for atomic drivers - Removal of owner field in SPI tinydrm drivers - Removal of explicit dependency on DT for tinydrm drivers - Conversion to YAML schemas for DT bindings - tidss: New driver - virtio: various reworks and fixes - Our usual dozen or so new panels or bridges Signed-off-by: Dave Airlie From: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20200210093421.xu4sofldm6wm6xq6@gilmour.lan

backlight: add led-backlight driver

2020-02-19T21:15:39+00:00

This patch adds a led-backlight driver (led_bl), which is similar to pwm_bl except the driver uses a LED class driver to adjust the brightness in the HW. Multiple LEDs can be used for a single backlight. Signed-off-by: Tomi Valkeinen Signed-off-by: Jean-Jacques Hiblot Acked-by: Pavel Machek Reviewed-by: Daniel Thompson Acked-by: Lee Jones Acked-by: Tony Lindgren Tested-by: Tony Lindgren Tested-by: Guido Günther Signed-off-by: Pavel Machek Signed-off-by: Tony Lindgren

backlight: qcom-wled: Fix unsigned comparison to zero

2020-01-23T07:53:12+00:00

Fixes coccicheck warning: ./drivers/video/backlight/qcom-wled.c:1104:5-15: WARNING: Unsigned expression compared with zero: string_len > 0 The unsigned variable string_len is assigned a return value from the call to of_property_count_elems_of_size(), which may return negative error code. Fixes: 775d2ffb4af6 ("backlight: qcom-wled: Restructure the driver for WLED3") Signed-off-by: Chen Zhou Reviewed-by: Bjorn Andersson Reviewed-by: Daniel Thompson Reviewed-by: Kiran Gunda Signed-off-by: Lee Jones

video: Fix Kconfig indentation

2020-01-15T16:31:43+00:00

Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski Cc: Jiri Kosina Cc: Lee Jones Cc: Daniel Thompson Cc: Jingoo Han Signed-off-by: Bartlomiej Zolnierkiewicz Link: https://patchwork.freedesktop.org/patch/msgid/20191120133838.13132-1-krzk@kernel.org

backlight: bd6107: Convert to use GPIO descriptor

2019-12-16T10:32:27+00:00

The Rohm BD6107 driver can pass a fixed GPIO line using the old GPIO API using platform data. As there are no in-tree users of this platform data since 2013, we can convert this to use a GPIO descriptor and require any out-of-tree consumers to pass the GPIO using a machine descriptor table instead. Signed-off-by: Linus Walleij Reviewed-by: Laurent Pinchart Reviewed-by: Daniel Thompson Signed-off-by: Lee Jones