kernel/git/stable/linux-stable.git/fs/f2fs/data.c, branch linux-4.19.y

f2fs: fix to drop all dirty pages during umount() if cp_error is set

2023-05-30T11:42:09+00:00

[ Upstream commit c9b3649a934d131151111354bcbb638076f03a30 ] xfstest generic/361 reports a bug as below: f2fs_bug_on(sbi, sbi->fsync_node_num); kernel BUG at fs/f2fs/super.c:1627! RIP: 0010:f2fs_put_super+0x3a8/0x3b0 Call Trace: generic_shutdown_super+0x8c/0x1b0 kill_block_super+0x2b/0x60 kill_f2fs_super+0x87/0x110 deactivate_locked_super+0x39/0x80 deactivate_super+0x46/0x50 cleanup_mnt+0x109/0x170 __cleanup_mnt+0x16/0x20 task_work_run+0x65/0xa0 exit_to_user_mode_prepare+0x175/0x190 syscall_exit_to_user_mode+0x25/0x50 do_syscall_64+0x4c/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc During umount(), if cp_error is set, f2fs_wait_on_all_pages() should not stop waiting all F2FS_WB_CP_DATA pages to be writebacked, otherwise, fsync_node_num can be non-zero after f2fs_wait_on_all_pages() causing this bug. In this case, to avoid deadloop in f2fs_wait_on_all_pages(), it needs to drop all dirty pages rather than redirtying them. Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Sasha Levin

f2fs: fix cgroup writeback accounting with fs-layer encryption

2023-03-11T15:32:02+00:00

commit 844545c51a5b2a524b22a2fe9d0b353b827d24b4 upstream. When writing a page from an encrypted file that is using filesystem-layer encryption (not inline encryption), f2fs encrypts the pagecache page into a bounce page, then writes the bounce page. It also passes the bounce page to wbc_account_cgroup_owner(). That's incorrect, because the bounce page is a newly allocated temporary page that doesn't have the memory cgroup of the original pagecache page. This makes wbc_account_cgroup_owner() not account the I/O to the owner of the pagecache page as it should. Fix this by always passing the pagecache page to wbc_account_cgroup_owner(). Fixes: 578c647879f7 ("f2fs: implement cgroup writeback support") Cc: stable@vger.kernel.org Reported-by: Matthew Wilcox (Oracle) Signed-off-by: Eric Biggers Acked-by: Tejun Heo Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Greg Kroah-Hartman

f2fs: Return EOF on unaligned end of file DIO read

2020-09-23T10:10:59+00:00

[ Upstream commit 20d0a107fb35f37578b919f62bd474d6d358d579 ] Reading past end of file returns EOF for aligned reads but -EINVAL for unaligned reads on f2fs. While documentation is not strict about this corner case, most filesystem returns EOF on this case, like iomap filesystems. This patch consolidates the behavior for f2fs, by making it return EOF(0). it can be verified by a read loop on a file that does a partial read before EOF (A file that doesn't end at an aligned address). The following code fails on an unaligned file on f2fs, but not on btrfs, ext4, and xfs. while (done < total) { ssize_t delta = pread(fd, buf + done, total - done, off + done); if (!delta) break; ... } It is arguable whether filesystems should actually return EOF or -EINVAL, but since iomap filesystems support it, and so does the original DIO code, it seems reasonable to consolidate on that. Signed-off-by: Gabriel Krisman Bertazi Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Sasha Levin

f2fs: fix potential overflow

2020-01-17T18:47:13+00:00

commit 1f0d5c911b64165c9754139a26c8c2fad352c132 upstream. We expect 64-bit calculation result from below statement, however in 32-bit machine, looped left shift operation on pgoff_t type variable may cause overflow issue, fix it by forcing type cast. page->index << PAGE_SHIFT; Fixes: 26de9b117130 ("f2fs: avoid unnecessary updating inode during fsync") Fixes: 0a2aa8fbb969 ("f2fs: refactor __exchange_data_block for speed up") Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Greg Kroah-Hartman

f2fs: fix to spread clear_cold_data()

2019-12-01T08:16:54+00:00

[ Upstream commit 2baf07818549c8bb8d7b3437e889b86eab56d38e ] We need to drop PG_checked flag on page as well when we clear PG_uptodate flag, in order to avoid treating the page as GCing one later. Signed-off-by: Weichao Guo Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Sasha Levin

f2fs: update i_size after DIO completion

2019-11-20T17:47:39+00:00

[ Upstream commit 0a4daae5ffea39f5015334e4d18a6a80b447cae4 ] This is related to ee70daaba82d ("xfs: update i_size after unwritten conversion in dio completion") If we update i_size during dio_write, dio_read can read out stale data, which breaks xfstests/465. Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Sasha Levin

f2fs: submit bio after shutdown

2019-11-20T17:46:12+00:00

[ Upstream commit 5ce805869cbed93267ed26552ff76e30f05c91f7 ] Sometimes, some merged IOs could get a chance to be submitted, resulting in system hang in shutdown test. This issues IOs all the time after shutdown. Signed-off-by: Jaegeuk Kim Signed-off-by: Sasha Levin

f2fs: avoid wrong decrypted data from disk

2019-11-20T17:45:57+00:00

[ Upstream commit 0ded69f632bb717be9aeea3ae74e29050fcb060c ] 1. Create a file in an encrypted directory 2. Do GC & drop caches 3. Read stale data before its bio for metapage was not issued yet Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Sasha Levin

f2fs: use generic EFSBADCRC/EFSCORRUPTED

2019-10-01T06:26:13+00:00

[ Upstream commit 10f966bbf521bb9b2e497bbca496a5141f4071d0 ] f2fs uses EFAULT as error number to indicate filesystem is corrupted all the time, but generic filesystems use EUCLEAN for such condition, we need to change to follow others. This patch adds two new macros as below to wrap more generic error code macros, and spread them in code. EFSBADCRC EBADMSG /* Bad CRC detected */ EFSCORRUPTED EUCLEAN /* Filesystem is corrupted */ Reported-by: Pavel Machek Signed-off-by: Chao Yu Acked-by: Pavel Machek Signed-off-by: Jaegeuk Kim Signed-off-by: Sasha Levin

f2fs: Fix use of number of devices

2019-05-31T13:46:00+00:00

commit 0916878da355650d7e77104a7ac0fa1784eca852 upstream. For a single device mount using a zoned block device, the zone information for the device is stored in the sbi->devs single entry array and sbi->s_ndevs is set to 1. This differs from a single device mount using a regular block device which does not allocate sbi->devs and sets sbi->s_ndevs to 0. However, sbi->s_devs == 0 condition is used throughout the code to differentiate a single device mount from a multi-device mount where sbi->s_ndevs is always larger than 1. This results in problems with single zoned block device volumes as these are treated as multi-device mounts but do not have the start_blk and end_blk information set. One of the problem observed is skipping of zone discard issuing resulting in write commands being issued to full zones or unaligned to a zone write pointer. Fix this problem by simply treating the cases sbi->s_ndevs == 0 (single regular block device mount) and sbi->s_ndevs == 1 (single zoned block device mount) in the same manner. This is done by introducing the helper function f2fs_is_multi_device() and using this helper in place of direct tests of sbi->s_ndevs value, improving code readability. Fixes: 7bb3a371d199 ("f2fs: Fix zoned block device support") Cc: Signed-off-by: Damien Le Moal Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Greg Kroah-Hartman