kernel/git/stable/linux-stable.git/fs/nfs/nfsroot.c, branch master

NFS: Fix an off by one in root_nfs_cat()

2024-03-09T14:14:51+00:00

The intent is to check if 'dest' is truncated or not. So, >= should be used instead of >, because strlcat() returns the length of 'dest' and 'src' excluding the trailing NULL. Fixes: 56463e50d1fc ("NFS: Use super.c for NFSROOT mount option parsing") Signed-off-by: Christophe JAILLET Reviewed-by: Benjamin Coddington Signed-off-by: Trond Myklebust

NFS: Prefer strscpy over strlcpy calls

2023-05-22T19:34:41+00:00

strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. Check for strscpy()'s return value of -E2BIG on truncate for safe replacement with strlcpy(). This is part of a tree-wide cleanup to remove the strlcpy() function entirely from the kernel [2]. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89 Signed-off-by: Azeem Shaikh Reviewed-by: Kees Cook Signed-off-by: Kees Cook Link: https://lore.kernel.org/r/20230512155749.1356958-1-azeemshaikh38@gmail.com

NFS: move from strlcpy with unused retval to strscpy

2022-10-03T15:26:36+00:00

Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang Signed-off-by: Anna Schumaker

nfsroot: Default mount option should ask for built-in NFS version

2020-11-02T15:29:03+00:00

Change the nfsroot default mount option to ask for NFSv2 only *if* the kernel was built with NFSv2 support. If not, default to NFSv3 or as last choice to NFSv4, depending on actual kernel config. Signed-off-by: Helge Deller Signed-off-by: Anna Schumaker

nfsroot: set tcp as the default transport protocol

2020-03-25T12:45:47+00:00

UDP is disabled by default in commit b24ee6c64ca7 ("NFS: allow deprecation of NFS UDP protocol"), but the default mount options is still udp, change it to tcp to avoid the "Unsupported transport protocol udp" error if no protocol is specified when mount nfs. Fixes: b24ee6c64ca7 ("NFS: allow deprecation of NFS UDP protocol") Signed-off-by: Liwei Song Signed-off-by: Trond Myklebust

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

nfsroot: make nfsroot to accept the 1024 bytes long directory name

2015-10-21T20:49:19+00:00

although NFS_MAXPATHLEN is defined to 1024, nfs client hopes to accept a 1024 byte path, but nfs_root_parms is limited to 256, and the nfs path will truncated when a user inputs nfs path from kernel cmdline enlarge nfs_root_parms to 1024, to make it accept the 1024 bytes long directory name, since nfs_root_parms is defined as _initdata, it will be released after system bootup Signed-off-by: Li RongQing Signed-off-by: Trond Myklebust

NFS: a couple off by ones

2015-01-31T01:43:30+00:00

These tests are off by one because if len == sizeof(nfs_export_path) then we have truncated the name. Signed-off-by: Dan Carpenter Signed-off-by: Trond Myklebust

SUNRPC/NFS: Add Kbuild dependencies for NFS_DEBUG/RPC_DEBUG

2012-03-20T17:08:26+00:00

This allows us to turn on/off the dprintk() debugging interfaces for those distributions that don't ship the 'rpcdebug' utility. It also allows us to add Kbuild dependencies. Specifically, we already know that dprintk() in general relies on CONFIG_SYSCTL. Now it turns out that the NFS dprintks depend on CONFIG_CRC32 after we added support for the filehandle hash. Reported-by: Paul Gortmaker Signed-off-by: Trond Myklebust

NFS: Revert NFSROOT default mount options

2011-05-27T21:42:47+00:00

Marek Belisko reports that recent attempts to fix regressions in NFSROOT have broken his configuration: > After update from 2.6.38-rc8 to 2.6.38 is mounting rootfs over nfs not possible. > Log: > VFS: Mounted root (nfs filesystem) on device 0:14. > Freeing init memory: 132K > nfs: server 10.146.1.21 not responding, still trying > nfs: server 10.146.1.21 not responding, still trying > > This is never ending. I make short bisect (not too much commits > between versions) > and bad commit was reported: 53d4737580535e073963b91ce87d4216e434fab5 > > NFS: NFSROOT should default to "proto=udp" > > I've tested on mini2440 board (DM9000, static IP). > Is there some missing option or something else to be checked? An examination of a network trace captured during the failure shows that the mount is actually succeeding, but that the client is not seeing READ replies larger than 16KB. This could be a local packet filtering issue on the client, but we didn't troubleshoot this further because of the reported "git bisect" result. Last fall we removed the ad hoc mount option parser in fs/nfs/nfsroot.c in favor of using the main parser in fs/nfs/super.c (see commit 56463e50 "NFS: Use super.c for NFSROOT mount option parsing"). That commit changed the default NFSROOT mount options to be the same as those employed by user space mounts. As it turns out, these new default mount options are not tolerated by many embedded systems. So far these problems have been due to specific behavior of certain embedded NICs. The NFS community does not have such hardware on hand for running tests. Commit 53d47375 recently introduced a clean way to specify default mount options for NFSROOT, so we can now easily restore the traditional defaults for NFSROOT: vers=2,udp,rsize=4096,wsize=4096 This should revert the new default NFSROOT mount options introduced with commit 56463e50. Tested-by: Marek Belisto Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust