kernel/git/stable/linux-stable.git/fs/xfs, branch linux-3.2.y

xfs: fix incorrect log_flushed on fsync

2017-11-26T13:51:07+00:00

commit 47c7d0b19502583120c3f396c7559e7a77288a68 upstream. When calling into _xfs_log_force{,_lsn}() with a pointer to log_flushed variable, log_flushed will be set to 1 if: 1. xlog_sync() is called to flush the active log buffer AND/OR 2. xlog_wait() is called to wait on a syncing log buffers xfs_file_fsync() checks the value of log_flushed after _xfs_log_force_lsn() call to optimize away an explicit PREFLUSH request to the data block device after writing out all the file's pages to disk. This optimization is incorrect in the following sequence of events: Task A Task B ------------------------------------------------------- xfs_file_fsync() _xfs_log_force_lsn() xlog_sync() [submit PREFLUSH] xfs_file_fsync() file_write_and_wait_range() [submit WRITE X] [endio WRITE X] _xfs_log_force_lsn() xlog_wait() [endio PREFLUSH] The write X is not guarantied to be on persistent storage when PREFLUSH request in completed, because write A was submitted after the PREFLUSH request, but xfs_file_fsync() of task A will be notified of log_flushed=1 and will skip explicit flush. If the system crashes after fsync of task A, write X may not be present on disk after reboot. This bug was discovered and demonstrated using Josef Bacik's dm-log-writes target, which can be used to record block io operations and then replay a subset of these operations onto the target device. The test goes something like this: - Use fsx to execute ops of a file and record ops on log device - Every now and then fsync the file, store md5 of file and mark the location in the log - Then replay log onto device for each mark, mount fs and compare md5 of file to stored value Cc: Christoph Hellwig Cc: Josef Bacik Signed-off-by: Amir Goldstein Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings

xfs: fix inobt inode allocation search optimization

2017-11-11T13:34:29+00:00

commit c44245b3d5435f533ca8346ece65918f84c057f9 upstream. When we try to allocate a free inode by searching the inobt, we try to find the inode nearest the parent inode by searching chunks both left and right of the chunk containing the parent. As an optimization, we cache the leftmost and rightmost records that we previously searched; if we do another allocation with the same parent inode, we'll pick up the search where it last left off. There's a bug in the case where we found a free inode to the left of the parent's chunk: we need to update the cached left and right records, but because we already reassigned the right record to point to the left, we end up assigning the left record to both the cached left and right records. This isn't a correctness problem strictly, but it can result in the next allocation rechecking chunks unnecessarily or allocating inodes further away from the parent than it needs to. Fix it by swapping the record pointer after we update the cached left and right records. Fixes: bd169565993b ("xfs: speed up free inode search") Signed-off-by: Omar Sandoval Reviewed-by: Christoph Hellwig Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong [bwh: Backported to 3.2: adjust filename] Signed-off-by: Ben Hutchings

xfs: XFS_IS_REALTIME_INODE() should be false if no rt device present

2017-10-12T14:27:20+00:00

commit b31ff3cdf540110da4572e3e29bd172087af65cc upstream. If using a kernel with CONFIG_XFS_RT=y and we set the RHINHERIT flag on a directory in a filesystem that does not have a realtime device and create a new file in that directory, it gets marked as a real time file. When data is written and a fsync is issued, the filesystem attempts to flush a non-existent rt device during the fsync process. This results in a crash dereferencing a null buftarg pointer in xfs_blkdev_issue_flush(): BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: xfs_blkdev_issue_flush+0xd/0x20 ..... Call Trace: xfs_file_fsync+0x188/0x1c0 vfs_fsync_range+0x3b/0xa0 do_fsync+0x3d/0x70 SyS_fsync+0x10/0x20 do_syscall_64+0x4d/0xb0 entry_SYSCALL64_slow_path+0x25/0x25 Setting RT inode flags does not require special privileges so any unprivileged user can cause this oops to occur. To reproduce, confirm kernel is compiled with CONFIG_XFS_RT=y and run: # mkfs.xfs -f /dev/pmem0 # mount /dev/pmem0 /mnt/test # mkdir /mnt/test/foo # xfs_io -c 'chattr +t' /mnt/test/foo # xfs_io -f -c 'pwrite 0 5m' -c fsync /mnt/test/foo/bar Or just run xfstests with MKFS_OPTIONS="-d rtinherit=1" and wait. Kernels built with CONFIG_XFS_RT=n are not exposed to this bug. Fixes: f538d4da8d52 ("[XFS] write barrier support") Signed-off-by: Richard Wareing Signed-off-by: Dave Chinner Signed-off-by: Linus Torvalds [bwh: Backported to 3.2: adjust filename] Signed-off-by: Ben Hutchings

xfs: fix up xfs_swap_extent_forks inline extent handling

2017-03-16T02:18:24+00:00

commit 4dfce57db6354603641132fac3c887614e3ebe81 upstream. There have been several reports over the years of NULL pointer dereferences in xfs_trans_log_inode during xfs_fsr processes, when the process is doing an fput and tearing down extents on the temporary inode, something like: BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 PID: 29439 TASK: ffff880550584fa0 CPU: 6 COMMAND: "xfs_fsr" [exception RIP: xfs_trans_log_inode+0x10] #9 [ffff8800a57bbbe0] xfs_bunmapi at ffffffffa037398e [xfs] #10 [ffff8800a57bbce8] xfs_itruncate_extents at ffffffffa0391b29 [xfs] #11 [ffff8800a57bbd88] xfs_inactive_truncate at ffffffffa0391d0c [xfs] #12 [ffff8800a57bbdb8] xfs_inactive at ffffffffa0392508 [xfs] #13 [ffff8800a57bbdd8] xfs_fs_evict_inode at ffffffffa035907e [xfs] #14 [ffff8800a57bbe00] evict at ffffffff811e1b67 #15 [ffff8800a57bbe28] iput at ffffffff811e23a5 #16 [ffff8800a57bbe58] dentry_kill at ffffffff811dcfc8 #17 [ffff8800a57bbe88] dput at ffffffff811dd06c #18 [ffff8800a57bbea8] __fput at ffffffff811c823b #19 [ffff8800a57bbef0] ____fput at ffffffff811c846e #20 [ffff8800a57bbf00] task_work_run at ffffffff81093b27 #21 [ffff8800a57bbf30] do_notify_resume at ffffffff81013b0c #22 [ffff8800a57bbf50] int_signal at ffffffff8161405d As it turns out, this is because the i_itemp pointer, along with the d_ops pointer, has been overwritten with zeros when we tear down the extents during truncate. When the in-core inode fork on the temporary inode used by xfs_fsr was originally set up during the extent swap, we mistakenly looked at di_nextents to determine whether all extents fit inline, but this misses extents generated by speculative preallocation; we should be using if_bytes instead. This mistake corrupts the in-memory inode, and code in xfs_iext_remove_inline eventually gets bad inputs, causing it to memmove and memset incorrect ranges; this became apparent because the two values in ifp->if_u2.if_inline_ext[1] contained what should have been in d_ops and i_itemp; they were memmoved due to incorrect array indexing and then the original locations were zeroed with memset, again due to an array overrun. Fix this by properly using i_df.if_bytes to determine the number of extents, not di_nextents. Thanks to dchinner for looking at this with me and spotting the root cause. Signed-off-by: Eric Sandeen Reviewed-by: Brian Foster Signed-off-by: Dave Chinner [bwh: Backported to 3.2: adjust filename, indentation] Signed-off-by: Ben Hutchings

posix_acl: Clear SGID bit when setting file permissions

2016-11-20T01:01:44+00:00

commit 073931017b49d9458aa351605b43a7e34598caef upstream. When file permissions are modified via chmod(2) and the user is not in the owning group or capable of CAP_FSETID, the setgid bit is cleared in inode_change_ok(). Setting a POSIX ACL via setxattr(2) sets the file permissions as well as the new ACL, but doesn't clear the setgid bit in a similar way; this allows to bypass the check in chmod(2). Fix that. References: CVE-2016-7097 Reviewed-by: Christoph Hellwig Reviewed-by: Jeff Layton Signed-off-by: Jan Kara Signed-off-by: Andreas Gruenbacher [bwh: Backported to 3.2: - Drop changes to ceph, f2fs, hfsplus, orangefs - Use capable() instead of capable_wrt_inode_uidgid() - Update ext3 and generic_acl.c as well - In gfs2, jfs, and xfs, take care to avoid leaking the allocated ACL if posix_acl_update_mode() determines it's not needed - Adjust context] Signed-off-by: Ben Hutchings

fs: Give dentry to inode_change_ok() instead of inode

2016-11-20T01:01:43+00:00

commit 31051c85b5e2aaaf6315f74c72a732673632a905 upstream. inode_change_ok() will be resposible for clearing capabilities and IMA extended attributes and as such will need dentry. Give it as an argument to inode_change_ok() instead of an inode. Also rename inode_change_ok() to setattr_prepare() to better relect that it does also some modifications in addition to checks. Reviewed-by: Christoph Hellwig Signed-off-by: Jan Kara [bwh: Backported to 3.2: - Drop changes to f2fs, lustre, orangefs, overlayfs - Adjust filenames, context - In nfsd, pass dentry to nfsd_sanitize_attrs() - In xfs, pass dentry to xfs_change_file_space(), xfs_set_mode(), xfs_setattr_nonsize(), and xfs_setattr_size() - Update ext3 as well - Mark pohmelfs as BROKEN; it's long dead upstream] Signed-off-by: Ben Hutchings

xfs: fix two memory leaks in xfs_attr_list.c error paths

2016-04-30T22:05:16+00:00

commit 2e83b79b2d6c78bf1b4aa227938a214dcbddc83f upstream. This plugs 2 trivial leaks in xfs_attr_shortform_list and xfs_attr3_leaf_list_int. Signed-off-by: Mateusz Guzik Reviewed-by: Eric Sandeen Signed-off-by: Dave Chinner [bwh: Backported to 3.2: adjust filename] Signed-off-by: Ben Hutchings

fs: create and use seq_show_option for escaping

2015-10-13T02:46:08+00:00

commit a068acf2ee77693e0bf39d6e07139ba704f461c3 upstream. Many file systems that implement the show_options hook fail to correctly escape their output which could lead to unescaped characters (e.g. new lines) leaking into /proc/mounts and /proc/[pid]/mountinfo files. This could lead to confusion, spoofed entries (resulting in things like systemd issuing false d-bus "mount" notifications), and who knows what else. This looks like it would only be the root user stepping on themselves, but it's possible weird things could happen in containers or in other situations with delegated mount privileges. Here's an example using overlay with setuid fusermount trusting the contents of /proc/mounts (via the /etc/mtab symlink). Imagine the use of "sudo" is something more sneaky: $ BASE="ovl" $ MNT="$BASE/mnt" $ LOW="$BASE/lower" $ UP="$BASE/upper" $ WORK="$BASE/work/ 0 0 none /proc fuse.pwn user_id=1000" $ mkdir -p "$LOW" "$UP" "$WORK" $ sudo mount -t overlay -o "lowerdir=$LOW,upperdir=$UP,workdir=$WORK" none /mnt $ cat /proc/mounts none /root/ovl/mnt overlay rw,relatime,lowerdir=ovl/lower,upperdir=ovl/upper,workdir=ovl/work/ 0 0 none /proc fuse.pwn user_id=1000 0 0 $ fusermount -u /proc $ cat /proc/mounts cat: /proc/mounts: No such file or directory This fixes the problem by adding new seq_show_option and seq_show_option_n helpers, and updating the vulnerable show_option handlers to use them as needed. Some, like SELinux, need to be open coded due to unusual existing escape mechanisms. [akpm@linux-foundation.org: add lost chunk, per Kees] [keescook@chromium.org: seq_show_option should be using const parameters] Signed-off-by: Kees Cook Acked-by: Serge Hallyn Acked-by: Jan Kara Acked-by: Paul Moore Cc: J. R. Okajima Signed-off-by: Kees Cook Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds [bwh: Backported to 3.2: - Drop changes to overlayfs, reiserfs - Drop vers option from cifs - ceph changes are all in one file - Adjust context] Signed-off-by: Ben Hutchings

xfs: return errors from partial I/O failures to files

2015-10-13T02:46:07+00:00

commit c9eb256eda4420c06bb10f5e8fbdbe1a34bc98e0 upstream. There is an issue with xfs's error reporting in some cases of I/O partially failing and partially succeeding. Calls like fsync() can report success even though not all I/O was successful in partial-failure cases such as one disk of a RAID0 array being offline. The issue can occur when there are more than one bio per xfs_ioend struct. Each call to xfs_end_bio() for a bio completing will write a value to ioend->io_error. If a successful bio completes after any failed bio, no error is reported do to it writing 0 over the error code set by any failed bio. The I/O error information is now lost and when the ioend is completed only success is reported back up the filesystem stack. xfs_end_bio() should only set ioend->io_error in the case of BIO_UPTODATE being clear. ioend->io_error is initialized to 0 at allocation so only needs to be updated by a failed bio. Also check that ioend->io_error is 0 so that the first error reported will be the error code returned. Signed-off-by: David Jeffery Reviewed-by: Dave Chinner Signed-off-by: Dave Chinner [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings

xfs: Fix xfs_attr_leafblock definition

2015-10-13T02:46:06+00:00

commit ffeecc5213024ae663377b442eedcfbacf6d0c5d upstream. struct xfs_attr_leafblock contains 'entries' array which is declared with size 1 altough it can in fact contain much more entries. Since this array is followed by further struct members, gcc (at least in version 4.8.3) thinks that the array has the fixed size of 1 element and thus may optimize away all accesses beyond the end of array resulting in non-working code. This problem was only observed with userspace code in xfsprogs, however it's better to be safe in kernel as well and have matching kernel and xfsprogs definitions. Signed-off-by: Jan Kara Reviewed-by: Dave Chinner Signed-off-by: Dave Chinner [bwh: Backported to 3.2: adjust filename] Signed-off-by: Ben Hutchings