kernel/git/stable/linux-stable.git/include/dt-bindings/reset, branch linux-6.17.y

Merge tag 'soc-drivers-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2025-07-29T18:13:27+00:00

Pull SoC driver updates from Arnd Bergmann: "Changes are all over the place, but very little sticks out as noteworthy. There is a new misc driver for the Raspberry Pi 5's RP1 multifunction I/O chip, along with hooking it up to the pinctrl and clk frameworks. The reset controller and memory subsystems have mainly small updates, but there are two new reset drivers for the K230 and VC1800B SoCs, and new memory driver support for Tegra264. The ARM SMCCC and SCMI firmware drivers gain a few more features that should help them be supported across more environments. Similarly, the SoC specific firmware on Tegra and Qualcomm get minor enhancements and chip support. In the drivers/soc/ directory, the ASPEED LPC snoop driver gets an overhaul for code robustness, the Tegra and Qualcomm and NXP drivers grow to support more chips, while the Hisilicon, Mediatek and Renesas drivers see mostly janitorial fixes" * tag 'soc-drivers-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (100 commits) bus: del unnecessary init var soc: fsl: qe: convert set_multiple() to returning an integer pinctrl: rp1: use new GPIO line value setter callbacks soc: hisilicon: kunpeng_hccs: Fix incorrect log information dt-bindings: soc: qcom: qcom,pmic-glink: document Milos compatible dt-bindings: soc: qcom,aoss-qmp: document the Milos Always-On Subsystem side channel dt-bindings: firmware: qcom,scm: document Milos SCM Firmware Interface soc: qcom: socinfo: Add support to retrieve APPSBL build details soc: qcom: pmic_glink: fix OF node leak soc: qcom: spmi-pmic: add more PMIC SUBTYPE IDs soc: qcom: socinfo: Add PM7550 & PMIV0108 PMICs soc: qcom: socinfo: Add SoC IDs for SM7635 family dt-bindings: arm: qcom,ids: Add SoC IDs for SM7635 family firmware: qcom: scm: request the waitqueue irq *after* initializing SCM firmware: qcom: scm: initialize tzmem before marking SCM as available firmware: qcom: scm: take struct device as argument in SHM bridge enable firmware: qcom: scm: remove unused arguments from SHM bridge routines soc: qcom: rpmh-rsc: Add RSC version 4 support memory: tegra: Add Tegra264 MC and EMC support firmware: tegra: bpmp: Fix build failure for tegra264-only config ...

Merge tag 'sunxi-dt-for-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt

2025-07-22T19:54:29+00:00

Allwinner device tree changes for 6.17 This branch includes a change shared with the clk tree for adding the missing PPU0 reset on the A523. The PM domain DT binding immutable branch is also included, which brings in v6.16-rc2, as well as PM domain bindings for other platforms. Other changes include: - RGB666 LCD pin definitions for the V3s PE pins and V3 PD pins - node order fixes for the A523 dtsi - UART1 pin definitions for A523 - Allwinner board DT binding cleanup - EMAC support on A100/A133 - Enabled on the Liontron H-A133L board - SID efuse, power controllers and GPU added for A523 - A523 GPU enabled on all existing boards New boards: - Xunlong OrangePi 4A with the Allwinner T527 SoC. * tag 'sunxi-dt-for-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (21 commits) arm64: dts: allwinner: a523: enable Mali GPU for all boards arm64: dts: allwinner: a523: add Mali GPU node arm64: dts: allwinner: a523: Add power controller device nodes dt-bindings: power: Add A523 PPU and PCK600 power controllers arm64: dts: allwinner: A523: Add SID controller node arm64: dts: allwinner: a133-liontron-h-a133l: Add Ethernet support arm64: dts: allwinner: a100: Add EMAC support arm64: dts: allwinner: a100: Add pin definitions for RGMII/RMII dt-bindings: arm: sunxi: Combine board variants into enums dt-bindings: power: qcom,rpmpd: document the Milos RPMh Power Domains arm64: dts: allwinner: t527: Add OrangePi 4A board arm64: dts: allwinner: a523: Add UART1 pins arm64: dts: allwinner: a523: Move rgmii0 pins to correct location arm64: dts: allwinner: a523: Move mmc nodes to correct position dt-bindings: arm: sunxi: Add Xunlong OrangePi 4A board ARM: dts: sun8i: v3: Add RGB666 LCD PD pins definition ARM: dts: sun8i: v3s: Add RGB666 LCD PE pins definition dt-bindings: reset: sun55i-a523-r-ccu: Add missing PPU0 reset dt-bindings: firmware: thead,th1520: Add resets for GPU clkgen dt-bindings: rockchip: pmu: Add compatible for RK3528 ... Link: https://lore.kernel.org/r/aHaQFe3Lr8Qzyb1M@wens.tw Signed-off-by: Arnd Bergmann

dt-bindings: Add Tegra264 clock and reset definitions

2025-07-11T14:48:07+00:00

The BPMP firmware on Tegra264 defines a set of IDs for clock and reset resources. These are not enumerations but provided by hardware, and 0 is a reserved value, hence the numbering starts at 1. Acked-by: Rob Herring (Arm) Signed-off-by: Thierry Reding

dt-bindings: reset: add support for canaan,k230-rst

2025-06-27T15:45:51+00:00

Introduces a reset controller driver for the Kendryte K230 SoC, resposible for managing the reset functionality of the CPUs and various sub-modules. Reviewed-by: Conor Dooley Reviewed-by: Chen Wang Signed-off-by: Junhui Liu Link: https://lore.kernel.org/r/20250613-k230-reset-v4-1-e5266d2be440@pigmoral.tech Signed-off-by: Philipp Zabel

dt-bindings: reset: sun55i-a523-r-ccu: Add missing PPU0 reset

2025-06-25T13:25:09+00:00

There is a PPU0 reset control bit in the same register as the PPU1 reset control. This missing reset control is for the PCK-600 unit in the SoC. Manual tests show that the reset control indeed exists, and if not configured, the system will hang when the PCK-600 registers are accessed. Add a reset entry for it at the end of the existing ones. Fixes: 52dbf84857f0 ("dt-bindings: clk: sunxi-ng: document two Allwinner A523 CCUs") Acked-by: Conor Dooley Acked-by: Stephen Boyd Reviewed-by: Andre Przywara Link: https://patch.msgid.link/20250619171025.3359384-2-wens@kernel.org Signed-off-by: Chen-Yu Tsai

Merge tag 'soc-drivers-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2025-05-31T14:53:30+00:00

Pull SoC driver updates from Arnd Bergmann: "Updates are across the usual driver subsystems with SoC specific drivers: - added soc specicific drivers for sophgo cv1800 and sg2044, qualcomm sm8750, and amlogic c3 and s4 chips. - cache controller updates for sifive chips, plus binding changes for other cache descriptions. - memory controller drivers for mediatek mt6893, stm32 and cleanups for a few more drivers - reset controller drivers for T-Head TH1502, Sophgo sg2044 and Renesas RZ/V2H(P) - SCMI firmware updates to better deal with buggy firmware, plus better support for Qualcomm X1E and NXP i.MX specific interfaces - a new platform driver for the crypto firmware on Cznic Turris Omnia/MOX - cleanups for the TEE firmware subsystem and amdtee driver - minor updates and fixes for freescale/nxp, qualcomm, google, aspeed, wondermedia, ti, nxp, renesas, hisilicon, mediatek, broadcom and samsung SoCs" * tag 'soc-drivers-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (133 commits) soc: aspeed: Add NULL check in aspeed_lpc_enable_snoop() soc: aspeed: lpc: Fix impossible judgment condition ARM: aspeed: Don't select SRAM docs: firmware: qcom_scm: Fix kernel-doc warning soc: fsl: qe: Consolidate chained IRQ handler install/remove firmware: qcom: scm: Allow QSEECOM for HP EliteBook Ultra G1q dt-bindings: mfd: qcom,tcsr: Add compatible for ipq5018 dt-bindings: cache: add QiLai compatible to ax45mp memory: stm32_omm: Fix error handling in stm32_omm_disable_child() dt-bindings: cache: Convert marvell,tauros2-cache to DT schema dt-bindings: cache: Convert marvell,{feroceon,kirkwood}-cache to DT schema soc: samsung: exynos-pmu: enable CPU hotplug support for gs101 MAINTAINERS: Add google,gs101-pmu-intr-gen.yaml binding file dt-bindings: soc: samsung: exynos-pmu: gs101: add google,pmu-intr-gen phandle dt-bindings: soc: google: Add gs101-pmu-intr-gen binding documentation bus: fsl-mc: Use strscpy() instead of strscpy_pad() soc: fsl: qbman: Remove const from portal->cgrs allocation type bus: fsl_mc: Fix driver_managed_dma check bus: fsl-mc: increase MC_CMD_COMPLETION_TIMEOUT_MS value bus: fsl-mc: drop useless cleanup ...

dt-bindings: clock: sun50i-h616-ccu: Add LVDS reset

2025-05-10T01:40:52+00:00

Add the required LVDS reset binding for the LCD TCON. Signed-off-by: Chris Morgan Signed-off-by: Ryan Walklin Reviewed-by: Andre Przywara Link: https://patch.msgid.link/20250507201943.330111-2-macroalpha82@gmail.com Signed-off-by: Chen-Yu Tsai

dt-bindings: reset: Add T-HEAD TH1520 SoC Reset Controller

2025-04-07T08:19:27+00:00

Add a YAML schema for the T-HEAD TH1520 SoC reset controller. This controller manages resets for subsystems such as the GPU within the TH1520 SoC. Reviewed-by: Krzysztof Kozlowski Signed-off-by: Michal Wilczynski Link: https://lore.kernel.org/r/20250303152511.494405-2-m.wilczynski@samsung.com Signed-off-by: Philipp Zabel

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2025-03-30T00:23:34+00:00

Pull clk updates from Stephen Boyd: "Here's the pile of clk driver patches. The usual suspects^Wsilicon vendors are all here, adding new SoC support and fixing existing code. There are a few patches to the clk framework here as well. They've been baking in linux-next for weeks so I'm hoping we don't have to revert them. The disable OF node patch is probably the scariest one although it seems unlikely that a system would be relying on a driver _not_ probing because the clk never appeared, but you never know. Nothing looks out of the ordinary on the driver side but that's because it's mostly a bunch of data. Core: - Use dev_err_probe() in the clk registration path (Peering into the crystal ball shows many patches that remove printks) - Check for disabled OF nodes in of_clk_get_hw_from_clkspec() New Drivers: - Allwinner A523/T527 clk driver - Qualcomm IPQ9574 NSS clk driver - Qualcomm QCS8300 GPU and video clk drivers - Qualcomm SDM429 RPM clks - Qualcomm QCM6490 LPASS (low power audio) resets - Samsung Exynos2200: driver for several clock controllers (Alive, CMGP, HSI, PERIC/PERIS, TOP, UFS and VFS) - Samsung Exynos7870: Driver for several clock controllers (Alive, MIF, DISP AUD, FSYS, G3D, ISP, MFC and PERI) - Rockchip rk3528 and rk3562 clk driver Updates: - Various fixes to SoC clk drivers for incorrect data, avoid touching protected registers, etc. - Additions for some missing clks in existing SoC clk drivers - DT schema conversions from text to YAML - Kconfig cleanups to allow drivers to be compiled on moar architectures" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (125 commits) clk: qcom: Add NSS clock Controller driver for IPQ9574 clk: qcom: gcc-ipq9574: Add support for gpll0_out_aux clock dt-bindings: clock: Add ipq9574 NSSCC clock and reset definitions dt-bindings: clock: gcc-ipq9574: Add definition for GPLL0_OUT_AUX clk: qcom: gcc-msm8953: fix stuck venus0_core0 clock clk: qcom: mmcc-sdm660: fix stuck video_subcore0 clock dt-bindings: clock: qcom,x1e80100-camcc: Fix the list of required-opps clk: amlogic: a1: fix a typo clk: amlogic: gxbb: drop non existing 32k clock parent clk: amlogic: gxbb: drop incorrect flag on 32k clock clk: amlogic: g12b: fix cluster A parent data clk: amlogic: g12a: fix mmc A peripheral clock dt-bindings: clocks: atmel,at91rm9200-pmc: add missing compatibles dt-bindings: reset: fix double id on rk3562-cru reset ids drivers: clk: qcom: ipq5424: fix the freq table of sdcc1_apps clock clk: qcom: lpassaudiocc-sc7280: Add support for LPASS resets for QCM6490 dt-bindings: clock: qcom: Add compatible for QCM6490 boards clk: qcom: gdsc: Update the status poll timeout for GDSC clk: qcom: gdsc: Set retain_ff before moving to HW CTRL clk: davinci: remove support for da830 ...

Merge tag 'rproc-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux

2025-03-30T00:18:50+00:00

Pull remoteproc updates from Bjorn Andersson: - Transition the i.MX8MP DSP remoteproc driver to use the reset framework for driving the run/stall reset bits - Add support for managing the modem remoteprocessor on the Qualcomm MSM8226, MSM8926, and SM8750 platforms * tag 'rproc-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (28 commits) remoteproc: qcom_q6v5_pas: Make single-PD handling more robust remoteproc: qcom_q6v5_pas: Use resource with CX PD for MSM8226 remoteproc: core: Clear table_sz when rproc_shutdown remoteproc: sysmon: Update qcom_add_sysmon_subdev() comment dt-bindings: remoteproc: Consolidate SC8180X and SM8150 PAS files irqdomain: remoteproc: Switch to of_fwnode_handle() remoteproc: qcom: pas: add minidump_id to SC7280 WPSS remoteproc: imx_dsp_rproc: Document run_stall struct member remoteproc: qcom: pas: Add SM8750 MPSS dt-bindings: remoteproc: Add SM8750 MPSS imx_dsp_rproc: Use reset controller API to control the DSP reset: imx8mp-audiomix: Add support for DSP run/stall reset: imx8mp-audiomix: Introduce active_low configuration option reset: imx8mp-audiomix: Prepare the code for more reset bits reset: imx8mp-audiomix: Add prefix for internal macro dt-bindings: dsp: fsl,dsp: Add resets property dt-bindings: reset: audiomix: Add reset ids for EARC and DSP remoteproc: qcom_wcnss: Handle platforms with only single power domain dt-bindings: remoteproc: qcom,wcnss-pil: Add support for single power-domain platforms remoteproc: qcom_q6v5_mss: Add modem support on MSM8926 ...