| Age | Commit message (Collapse) | Author |
|---|
|
Split audio init to make the initialization modular
Test the audio pin initialization
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Adds a few more test cases to the hdcp code
- process_output(): make sure work gets requeued when callback and
watchdog are stopped but also asked to run again
- event_property_update(): bail out when the connector is NULL
- hdcp_handle_cpirq(): schedules the work and picks the right link
- hdcp_update_display(): schedules property validation on enable,
resets status and cancels validation on disable
- hdcp_create_workqueue(): returns NULL when max links is zero
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
If an external monitor is connected at power-on and then unplugged
before the driver loads (e.g. at the GRUB menu), the system can no
longer enter the s0i3 deepest suspend state, even though all connectors
report disconnected.
The pre-OS firmware (GOP/vBIOS) lights up a front-end for the display
that is present at power-on. The driver never fully tears this inherited
pipe down, and the leftover pipe keeps the DCN block from reaching idle,
which blocks s0i3.
[How]
Add dc_disable_dangling_timing_generators() to DC core and call it from
amdgpu_dm right after dc_hardware_init(). It scans every enabled timing
generator and classifies it as in-use or dangling. If a dangling pipe
exists and nothing needs to be preserved, power down the hw blocks so
DCN can reach idle.
Assisted-by: Cursor:claude-opus-4.8
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
The 8K120/8K240 timings live in DisplayID extension blocks 2 and 3
of this EDID. The EDID is a 4-block (512-byte) HDMI 2.1 EDID
that uses HF-EEODB.
drm core reads and parses this correctly, but amdgpu rebuilds its own copy.
Only 2 of 4 blocks were copied into sink->dc_edid, that leads to
drm_edid_connector_add_modes() never sees blocks 2 and 3.
[how]
Directly populate edid_blob_ptr with a blob whose length is the full,
and HF-EEODB-aware size.
Reviewed-by: Sun peng (Leo) Li <sunpeng.li@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHAT]
Add KUnit coverage for the two remaining uncovered functions in
amdgpu_dm_irq.c: amdgpu_dm_irq_handler() and dm_handle_vmin_vmax_update().
amdgpu_dm_irq_handler() is driven with a fake dc whose irq_service maps
the hardware IRQ entry to a DC source and whose per-source info table
lets dc_interrupt_ack() succeed; high- and low-context counting handlers
verify the immediate and scheduled dispatch paths.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHAT]
Add the final batch of amdgpu_dm_irq KUnit tests covering the high-IRQ
callbacks (dm_pflip_high_irq, dm_vupdate_high_irq, dm_crtc_high_irq),
dm_handle_hpd_work, the DMUB outbox1 low IRQ, and the per-ASIC IRQ
handler registration helpers (DCE110, DCN10 and outbox).
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHAT]
Add KUnit tests for the DMUB HPD notification callbacks
(dmub_hpd_callback, dmub_hpd_sense_callback) and for
amdgpu_dm_register_hpd_handlers().
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add KUnit coverage for the HPD interrupt-handling helpers: the HPD-RX
offload worker, the HDMI HPD debounce worker, handle_hpd_irq_helper(),
handle_hpd_irq(), schedule_hpd_rx_offload_work() and handle_hpd_rx_irq().
Expose these statics for KUnit and add the stub link-service callbacks,
sink helpers and fixtures the tests rely on.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add KUnit coverage for amdgpu_dm_hpd_init() and amdgpu_dm_hpd_fini():
empty connector list, the per-connector HW fallback path, the analog
polling enable/disable path, and the base-driver irq-ref path. Export
both functions for KUnit and add shared drm_connector test helpers.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHAT]
Add KUnit tests for the per-source IRQ state callbacks (HPD, pflip,
CRTC, vline0, vupdate, dmub outbox/trace), the immediate and scheduled
IRQ work paths, and amdgpu_dm_outbox_init.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHAT]
Expand the amdgpu_dm_irq KUnit suite with the first batch of tests
covering IRQ source-function setup, suspend/resume of the IRQ
clients, and the HPD RX offload workqueue lifecycle.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHAT]
Add KUnit coverage for dm_helpers_construct_old_payload, the DP MST
payload allocation, poll-for-ACT and deallocation success paths, the
full dm_helpers_dp_write_dsc_enable matrix and
dm_helpers_dp_handle_test_pattern_request.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
dm_mst_test_fp_guarded_public_stubs() passes NULL arguments to
dm_dp_mst_is_port_support_mode() to test the stub implementation when
CONFIG_DRM_AMD_DC_FP is disabled.
However, this test is always registered. When CONFIG_DRM_AMD_DC_FP is
enabled, the real implementation is used instead of the stub. The real
implementation expects valid pointers, so passing NULL can lead to a
NULL pointer dereference.
Register this test only when CONFIG_DRM_AMD_DC_FP is disabled.
Reported-by: Dan Carpenter <error27@gmail.com>
Cc: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: George Zhang <george.zhang@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
No functional changes. Just clean up a conceptual mismatch.
Based on feedback on the NUTMEG code in DC, the
preferred_link_setting is meant to force the DP link to a
specific setting, meaning both the link rate and lane count
should be locked to an exact value. What NUTMEG needs is
a lower bound on the link rate, which is not the same concept.
Implement this as a HW workaround flag instead.
Suggested-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When there is a preferred link rate setting, it needs to be
applied to both the current and initial link rate.
This was regressed by a "coding style" fix, which caused
the current link rate to not respect the preferred value.
This commit restores the functionality of NUTMEG,
the DP bridge encoder found on old APUs such as Kaveri.
Fixes: a62346043a89 ("drm/amd/display: Fix coding style issue")
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5465
Cc: Chuanyu Tseng <Chuanyu.Tseng@amd.com>
Reviewed-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
DM I2C adapters can remain visible to userspace while DM teardown is
already in progress. A concurrent i2c-dev transfer may then enter
amdgpu_dm_i2c_xfer() after the backing DM state has been torn down,
leading to a NULL pointer dereference.
Create a devres group around the DM I2C adapter lifetime and release it
at the start of dm_hw_fini(), before HPD, IRQ, and DM state are torn
down. This removes the I2C adapters first and waits for in-flight users
to drain before the structures used by amdgpu_dm_i2c_xfer() disappear.
This fixes a teardown ordering race seen during device removal:
BUG: kernel NULL pointer dereference
RIP: amdgpu_dm_i2c_xfer+0x122/0x1c0 [amdgpu]
Call Trace:
__i2c_transfer
i2c_transfer
i2cdev_ioctl_rdwr
Fixes: 5b3eca05cfb0 ("drm/amd/display: Use devm_i2c_add_adapter to simplify i2c cleanup logic")
Signed-off-by: Geoffrey McRae <geoffrey.mcrae@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Both jpeg_v5_0_1.c and jpeg_v5_0_2.c implement identical
interrupt processing routines. To avoid code duplication,
make the implementation in jpeg_v5_0_1.c non-static and
call it directly from jpeg_v5_0_2.c.
Signed-off-by: Andre Luiz Batista Bueno <andrebueno.mac@gmail.com>
Co-developed-by: Enzo Furegatti Spinella <enzo.spinella@usp.br>
Signed-off-by: Enzo Furegatti Spinella <enzo.spinella@usp.br>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
debugfs is intended for debugging only, and failures to create debugfs
entries should not affect normal operation.
Remove the check for debugfs_create_dir() in kfd_debugfs_add_process().
If debugfs entries cannot be created, continue without them instead of
reporting an unnecessary error.
Fixes: 325de6bf3328 ("drm/amdkfd: expose pasid of secondary contexts by debugfs")
Reported-by: Dan Carpenter <error27@gmail.com>
Cc: Zhu Lingshan <lingshan.zhu@amd.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Replace the private switch-based speed conversion in
dw_pcie_link_set_max_speed() with the public pci_bus_speed2lnkctl2()
function.
This eliminates duplicate conversion logic and ensures consistency with
other PCIe drivers, while handling invalid speeds by falling back to
hardware capabilities.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260407130450.1489318-4-18255117159@163.com
|
|
Move the static array-based pci_bus_speed2lnkctl2() function from
bwctrl.c to pci.h as a public inline function.
This provides efficient O(1) speed-to-LNKCTL2 value conversion using
static array lookup, maintaining optimal performance while enabling
code reuse by other PCIe drivers.
Signed-off-by: Hans Zhang <18255117159@163.com>
[mani: replaced <asm/bug.h> with <linux/bug.h> as per checkpatch]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260407130450.1489318-3-18255117159@163.com
|
|
Extract the PCIe speed validation logic from bwctrl.c's static
pcie_valid_speed() into a public static inline function in pci.h.
This allows consistent speed range checks (2.5GT/s to 64.0GT/s) across
multiple drivers and functions, avoiding duplicate code and ensuring
validation consistency as per PCIe specifications.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260407130450.1489318-2-18255117159@163.com
|
|
Thestate CPUHP_AP_ARM_CORESIGHT_CTI_STARTING has become unused since commit
59213b4be5c1 ("coresight: cti: Remove CPU power management code").
Remove it as well.
Signed-off-by: Zenghui Yu <zenghui.yu@linux.dev>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260711135154.94276-1-zenghui.yu@linux.dev
|
|
The header define in asm/timex,h and the naming of the function to read the
delay timer are confusing at best.
Convert it to a config switch selected by the archictures which provide the
functionality and rename the function to delay_read_timer(), which makes
the purpose clear. Move the declaration to linux/delay.h where it belongs.
Remove the resulting empty asm/timex.h files as well.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260410120317.978403520@kernel.org
|
|
This has been scheduled for removal more than a decade ago and the comments
related to it have been dutifully ignored. The last dependencies are gone.
Remove it along with various now empty asm/timex.h files.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Link: https://patch.msgid.link/20260410120317.910770161@kernel.org
|
|
CLOCK_TICK_RATE is only used in x86 but defined all over the tree for no
reason with comments that it's scheduled for removal for more than a
decade.
Use PIT_TICK_RATE for registering refined jiffies to get rid of the last
dependency.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260410120317.843419270@kernel.org
|
|
Add support for the NXP IW61x wireless devices.
The nxpwifi driver implements a full-MAC design and integrates with
cfg80211 for configuration and control, supporting both station (STA)
and access point (AP) modes.
The driver provides a firmware-based command/event interface using TLV
messages, with the core handling command processing, event dispatching,
and device lifecycle management. A SDIO transport layer is implemented
to support IW61x devices.
Key features include:
- 802.11n/ac/ax (HT/VHT/HE) capability support
- Scan, association, and connection management
- Data path handling for TX/RX, including aggregation and reorder
- WMM QoS support and traffic prioritization
- 802.11h (DFS/TPC) support for regulatory compliance
- cfg80211 integration for STA and AP operations
- Debugfs and ethtool support
- Wake-on-LAN support
The driver translates cfg80211 configuration into firmware commands
and implements required data path processing in software where needed.
Signed-off-by: Jeff Chen <jeff.chen_1@nxp.com>
|
|
bui duc phuc <phucduc.bui@gmail.com> says:
This series contains a few small cleanups for the Tegra ASoC drivers.
- Use dev_err_probe() for regmap initialization failures.
- Return the original error from snd_soc_add_component_controls().
- Use devm_clk_get_optional() for the optional sync_input clock.
Overall, this simplifies the error paths and makes the code more
consistent.
Link: https://patch.msgid.link/20260715051115.17385-1-phucduc.bui@gmail.com
|
|
The existing comment states that the sync_input clock is only needed
when another I/O is configured to use the current I2S instance as its
input clock, and the current code does not treat its absence as an
error.
Use devm_clk_get_optional() to match the existing behaviour while still
reporting real failures via dev_err_probe(). Update the comment to
describe the optional nature of the clock rather than the previous error
handling.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260715051115.17385-5-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snd_soc_add_component_controls() already reports failures internally.
Return its error code directly instead of logging the error again in the
component probe callback. Also remove the now unnecessary local error
variable.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260715051115.17385-4-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snd_soc_add_component_controls() already reports failures internally.
Return its error code directly instead of logging the error again in the
component probe callback. Also remove the now unnecessary local error
variable.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260715051115.17385-3-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Replace the existing dev_err() and PTR_ERR() sequence with
dev_err_probe(), preserving the original error code while simplifying
the error handling.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260715051115.17385-2-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
User-controlled register indices from the ONE_REG ioctl are used to
index into the vector register buffer (v0..v31). Sanitize the calculated
offset with array_index_nospec() to prevent speculative out-of-bounds
access.
Signed-off-by: Zongmin Zhou <zhouzongmin@kylinos.cn>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260715030818.75657-1-min_halo@163.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
drmm_mutex_init() can fail while registering the managed cleanup action.
When that happens, drmm_add_action_or_reset() destroys the mutex before
returning the error. Continuing initialization would therefore leave the
debugfs GEM object list with an unusable lock.
Propagate the error as is already done for the other managed mutexes in
panthor_device_init().
Fixes: a3707f53eb3f ("drm/panthor: show device-wide list of DRM GEM objects over DebugFS")
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260713082912.321021-1-lilinmao@kylinos.cn
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
panthor_fw_load() detects truncated firmware images, but jumps to the
common cleanup path without setting ret. If no previous error was recorded,
the function can return 0 and treat the invalid firmware as successfully
loaded.
Set ret to -EINVAL before leaving the truncated-image path.
Fixes: 2718d91816ee ("drm/panthor: Add the FW logical block")
Cc: stable@vger.kernel.org
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20260714163056.22329-1-osama.abdelkader@gmail.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
Commit d1d564ec4992 ("gpio: move hogs into GPIO core") made
gpiochip_add_hog() return -EINVAL for hog nodes lacking any of the
'input', 'output-low' or 'output-high' properties. The error is
propagated by gpiochip_hog_lines() and fails registration of the
whole GPIO chip.
The previous OF-specific implementation tolerated such nodes:
of_parse_own_gpio() warned "no hogging state specified, bailing out"
and of_gpiochip_add_hog() stopped processing the node without failing
chip registration.
Some boards deliberately ship hog nodes without a hogging state in
their base devicetree and supply the state via overlay, e.g. the PCIe
slot key selection hogs on the BananaPi R4 Pro added in
commit e309fa232d12 ("arm64: dts: mediatek: mt7988a-bpi-r4pro: rework
pcie gpio-hog handling"), as the polarity set in the base devicetree
could not be overridden from an overlay.
Booting such a board without an overlay applied now fails to register
the gpiochip. On the BananaPi R4 Pro this means the MT7988A pinctrl
device fails to probe, all peripherals including the console UART
defer forever, and the board finally hangs when clk_disable_unused()
gates the clocks of the UART still in use by earlycon:
gpiochip_add_data_with_key: GPIOs 512..595 (pinctrl_moore) failed to register, -22
mt7988-pinctrl 1001f000.pinctrl: error -EINVAL: Failed to add gpio_chip
...
clk: Disabling unused clocks
(hangs)
Restore the previous behaviour by warning about hog nodes lacking a
hogging state and skipping them instead of failing the registration
of the whole GPIO chip.
Fixes: d1d564ec4992 ("gpio: move hogs into GPIO core")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/4c67cf0839ccf57db35a826df6d8fc779531509a.1783974733.git.daniel@makrotopia.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
The memory allocated for priv->blob.data is not freed in the error paths
that follow the fops_buf_size_set() call in gpio_la_poll_probe(), as
well as in the remove function. Fix that by using device managed action
to free the memory on remove.
Fixes: 7828b7bbbf20 ("gpio: add sloppy logic analyzer using polling")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20260715075311.527753-1-nihaal@cse.iitm.ac.in
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Compare the sampled clock values instead of their addresses. Comparing
addresses leaves the samples unsorted, preventing the code from discarding
the minimum and maximum samples.
Fixes: 1a5392479207 ("drm/i915/selftests: Measure CS_TIMESTAMP")
Signed-off-by: Emre Cecanpunar <emreleno@gmail.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20260714220430.238433-1-emreleno@gmail.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc into soc/arm
ARM: platform and feature deprecation for 7.3
This is an attempt to bring the source code to the state that we discussed
back in 2024, regarding a timeline for deprecating and removing features,
in particular platforms and ABIs that are basically unused and are
also getting in the way of maintenance.
The earlier consensus was to remove these features in 2025 or 2026
after the corresponding LTS kernel release. I would suggest pushing
these to early 2027 now, see the patch description for details on
each one:
- all board files that are still not converted to DT
(except for OMAP1 and S3C)
- iWMMXt FPU support
- ARMv6/ARM1136r0 (not ARMv6K/ARM1136r1/ARM1176) along with the
OMAP24xx and i.MX31 SoCs using it
- Cortex-M3/M4/M7 based microcontroller support
(stm32, imxrt, lpc18xx, samv7)
- LSI Axxia platform
- OABI, OABI-compat and NWFPE are confined to StrongARM based
builds and scheduled for removal once StrongARM is gone.
- DEPRECATED_PARAM_STRUCT, which was originally scheduled for
removal in 2006 (!)
The ARCH_S3C64XX platform was scheduled for removal in 2024, but is
still actively used and will get removed once Mark Brown stops using
it. The OMAP1 platform has some remaining boardfiles and is expected to
get converted to DT.
Big-endian ARMv7 CPU support is not scheduled for removal but marked
as broken the same way as ARM64 has, to reduce the need for testing
unused configurations. This may be removed in the future if arm64 does
it as well. Note that big-endian ARMv5 support is can still be
enabled since the patches to revive little-endianm mode are still
fresh.
Regarding actually removing the code, I would suggest linux-7.4 (January
2027), removing both the board files and any drivers that have either
become newly unused or were missed in a previous machine removal series,
followed by removing support for then unused CPUs a release later.
Links to previous discussion:
https://lore.kernel.org/linux-arm-kernel/20210109174357.GB1551@shell.armlinux.org.uk/
https://lore.kernel.org/linux-arm-kernel/2831c5a6-cfbf-4fe0-b51c-0396e5b0aeb7@app.fastmail.com/
https://lore.kernel.org/all/20241204102904.1863796-1-arnd@kernel.org/
https://lore.kernel.org/all/20260701212353.2196041-1-arnd@kernel.org/
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The kernel does not permit a device to register multiple sys-off
handlers for non-default priority levels. Hence, for multi-socket Tegra
devices, registering the sys-off handler in the Tegra PMC driver (which
uses the low priority level) more than once fails.
The Tegra PMC sys-off handler is supported for all current generations
of the Tegra SoC, however, it is only used as a low priority handler if
everything else fails. For example, on Tegra264 the EFI reboot handler
is called to restart the device. Therefore, for multi-socket devices,
skip the registering of the sys-off handler to because this is not
critical.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Remove the unnecessary space after a cast in _rtw_init_recv_priv() to fix
a checkpatch.pl coding style warning.
Signed-off-by: Jason Winter <jjx@live.nl>
Link: https://patch.msgid.link/BESP194MB2832DD527B23F20198ECDD9CB8FB2@BESP194MB2832.EURP194.PROD.OUTLOOK.COM
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A couple of runs of different AI tools have generated something like the
following bug report:
In nested_domain_free(), when refcount_dec_and_test() returns false
(other nested domains still reference the same gdom_info), the function
returns without calling kfree(ndom), leaking the nested_domain
structure. This problem wasn't introduced by this patch, but exists in
the code from commit 757d2b1fdf5b that the patch modifies. Each
nested_domain (ndom) is allocated individually in
amd_iommu_alloc_domain_nested() via kzalloc_obj(*ndom). The .free
callback is the sole point responsible for freeing this domain. When
the refcount is > 0, only the xa_unlock_irqrestore is performed and the
function returns, leaving ndom permanently allocated. This leak occurs
every time a nested domain sharing a gDomID is destroyed while other
domains still use that gDomID.
There is a similar leak later in this function in the WARN_ON() test when
the mapping is already NULL. Switch to a RAII-based cleanup for ndom, since
it should always be freed in this function.
Fixes: 757d2b1fdf5b ("iommu/amd: Introduce gDomID-to-hDomID Mapping and handle parent domain invalidation")
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Reviewed-by: Ankit Soni <Ankit.Soni@amd.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Lockdep complains:
[ 259.410489] =====================================================
[ 259.417287] WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected
[ 259.424667] 7.0.0-g51db1d8d2113 #54 Not tainted
[ 259.429718] -----------------------------------------------------
[ 259.436516] qemu-system-x86/10143 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
[ 259.444670] ff3b2b1c60305170 (&xa->xa_lock#25){+.+.}-{3:3}, at: __domain_flush_pages+0x17c/0x4b0
[ 259.454485]
and this task is already holding:
[ 259.460991] ff3b2b1c98504cc0 (&domain->lock){-.-.}-{3:3}, at: amd_iommu_iotlb_sync+0x25/0x60
[ 259.470408] which would create a new lock dependency:
[ 259.476041] (&domain->lock){-.-.}-{3:3} -> (&xa->xa_lock#25){+.+.}-{3:3}
[ 259.483615]
but this new dependency connects a HARDIRQ-irq-safe lock:
[ 259.492447] (&domain->lock){-.-.}-{3:3}
[ 259.492449]
... which became HARDIRQ-irq-safe at:
[ 259.503705] lock_acquire+0xb6/0x2e0
[ 259.507790] _raw_spin_lock_irqsave+0x3e/0x60
[ 259.512748] amd_iommu_flush_iotlb_all+0x20/0x50
[ 259.517996] iommu_dma_free_iova.isra.0+0x1b8/0x1e0
[ 259.523534] __iommu_dma_unmap+0xc2/0x140
[ 259.528100] iommu_dma_unmap_phys+0x55/0xc0
[ 259.532863] dma_unmap_phys+0x274/0x2e0
[ 259.537238] dma_unmap_page_attrs+0x17/0x30
[ 259.542000] nvme_unmap_data+0x13e/0x280
[ 259.546473] nvme_pci_complete_batch+0x45/0x70
[ 259.551524] nvme_irq+0x83/0x90
[ 259.555123] __handle_irq_event_percpu+0x92/0x360
[ 259.560466] handle_irq_event+0x39/0x80
[ 259.564841] handle_edge_irq+0xb2/0x1a0
[ 259.569214] __common_interrupt+0x4e/0x130
[ 259.573882] common_interrupt+0x88/0xa0
[ 259.578256] asm_common_interrupt+0x27/0x40
[ 259.583019] cpuidle_enter_state+0x119/0x5d0
[ 259.587877] cpuidle_enter+0x2e/0x50
[ 259.591962] do_idle+0x153/0x2c0
[ 259.595657] cpu_startup_entry+0x29/0x30
[ 259.600128] start_secondary+0x118/0x150
[ 259.604601] common_startup_64+0x13e/0x141
[ 259.609266]
to a HARDIRQ-irq-unsafe lock:
[ 259.615384] (&xa->xa_lock#25){+.+.}-{3:3}
[ 259.615386]
... which became HARDIRQ-irq-unsafe at:
[ 259.627039] ...
[ 259.627039] lock_acquire+0xb6/0x2e0
[ 259.633071] _raw_spin_lock+0x2f/0x50
[ 259.637250] amd_iommu_alloc_domain_nested+0x140/0x3c0
[ 259.643078] iommufd_hwpt_alloc+0x272/0x800 [iommufd]
[ 259.648813] iommufd_fops_ioctl+0x14e/0x200 [iommufd]
[ 259.654547] __x64_sys_ioctl+0x9d/0xf0
...
Since amd_iommu_domain_flush_pages() necessarily holds domain->lock to do the
flush, switch the allocation side in gdom_info_load_or_alloc_locked() to
HARDIRQ-safe allocation. The IOMMU_DESTROY->free path has the same issue,
so switch that path to HARDIRQ-safe locking as well.
Fixes: 757d2b1fdf5b ("iommu/amd: Introduce gDomID-to-hDomID Mapping and handle parent domain invalidation")
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Reviewed-by: Ankit Soni <Ankit.Soni@amd.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Since commit 860e748bddcc ("drm: ensure blend mode supported if pixel
format with alpha exposed"), drm_mode_config_validate() warns when a
plane exposes an alpha pixel format but not the "pixel blend mode"
property. The cursor (ARGB8888, all platforms) and the VLV/CHV primary
and sprite planes trip this.
Userspace has historically assumed premultiplied blending when the
property is not attached, so it is safe to assume that planes that
did not expose the property already blended with fixed pre-multiplied
alpha in hardware. Therefore, expose a "pixel blend mode" property
advertising only DRM_MODE_BLEND_PREMULTI to match that assumption and
silence the warning. The cursor call is unconditional; the primary and
sprite calls are gated to VLV/CHV, the only platforms whose format lists
include alpha formats.
Assisted-by: Claude:claude-opus-4-8
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/work_items/16623
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20260715054221.451421-1-chaitanya.kumar.borah@intel.com
|
|
The VLAN tests assume the test namespace starts with IPv4 forwarding off,
but a new netns copies conf/all and conf/default from init_net
(devinet_init_net(), with net.core.devconf_inherit_init_net at its
default), so on a host with net.ipv4.conf.all.forwarding=1 the devices in
the netns come up with forwarding already enabled. IPv6 uses compiled
defaults at the same sysctl value, so only the IPv4 arms are affected.
Two arms break as a result.
The arms that expect BPF_FIB_LKUP_RET_FWD_DISABLED see the lookup pass the
forwarding check and return SUCCESS instead, so fib_lookup fails:
test_fib_lookup:FAIL:fib_lookup_ret unexpected fib_lookup_ret: actual 0 != expected 5
Pin forwarding off in setup_netns() before the devices are created; the
existing per-device writes still enable it where the tests need it.
The netns arm has the opposite problem. It checks that a VLAN device in
another netns is not resolved and expects NOT_FWDED. The lookup runs
against the caller's FIB, which had no route to the destination, so a
kernel that resolved the moved device anyway also returned NOT_FWDED and
the arm passed regardless of the namespace check. On a forwarding-on host,
where the resolved device clears the forwarding gate, this makes the arm a
tautology. Add a route so a resolved device returns SUCCESS and the arm
can tell the two apart.
Verified by deleting the netns check from bpf_fib_vlan_input_dev(): with
the fix the arm fails on both a forwarding-off host (actual 5) and a
forwarding-on host (actual 0), where before it passed on the latter. The
real kernel passes the full suite on both.
Fixes: e54a87872e34 ("selftests/bpf: Add bpf_fib_lookup() VLAN flag tests")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/all/20260713163826.D70201F000E9@smtp.kernel.org/
Signed-off-by: Avinash Duduskar <avinash.duduskar@gmail.com>
Link: https://lore.kernel.org/bpf/20260715100349.2684391-1-avinash.duduskar@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
A full GPU reset is the only way to disable the MMUv2 and the
driver depends on the MMU being disabled after a reset to be able
to properly restart the GPU. Validate this assumption by checking
that the reset actually did disable the MMU.
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
Link: https://patch.msgid.link/20260511085148.652256-2-l.stach@pengutronix.de
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
|
|
While the FE is an important part of the GPU, which needs to be idle
after reset, all other modules should be idle after a proper reset.
Check all present modules for being idle to determine whether the
reset was successful.
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
Link: https://patch.msgid.link/20260511085148.652256-1-l.stach@pengutronix.de
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
|
|
Put all vmcs12 pages if KVM synthesizes a nested VM-Exit due to invalid
guest while emulating VMLAUNCH or VMRESUME. The invalid guest state path
doesn't use nested_vmx_vmexit() as that API is intended to be used if and
only if L2 is active, and the open coded equivalent neglects to put the
vmcs12 pages. Failure to put the vmcs12 pages leaks any pinned pages
(and/or mappings) if L1 retries VMLAUNCH/VMRESUME.
Note, the !from_vmenter scenario doesn't suffer the same problem, as
vmx_get_nested_state_pages() only gets/pins/maps the vmcs12 pages if L2 is
active, i.e. if a "full" VM-Exit is guaranteed before KVM will retry
getting vmcs12 pages.
Fixes: 96c66e87deee ("KVM/nVMX: Use kvm_vcpu_map when mapping the virtual APIC page")
Fixes: 3278e0492554 ("KVM/nVMX: Use kvm_vcpu_map when mapping the posted interrupt descriptor table")
Fixes: fe1911aa443e ("KVM: nVMX: Use kvm_vcpu_map() to get/pin vmcs12's APIC-access page")
Reported-by: Minh Nguyen <minhnguyen.080505@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: Fixes for 7.2
- more gmap KVM memory management fixes
- PCI passthru fixes
|
|
KVM x86 fixes for 7.2-rcN
- Fix a bug where KVM will trigger a UAF if updating IOMMU IRTEs fails when
registering an IRQ-bypass producer.
- Ignore pending PV EOI instead of BUG()ing the host if the feature was
disabled by the guest.
- Fix nVMX bugs where KVM would run L1 with an L1-controlled CR3 after a
failed "late" consistency check when KVM is NOT using EPT.
- Disallow intra-host migration/mirroring of SNP VMs as KVM doesn't yet
support moving/mirroring SNP state.
- Fix a TOCTOU bug in KVM's handling of the "trusted" CPUID for TDX guests.
- Fix a NULL pointer deref in trace_kvm_inj_exception() where a change to the
core infrastructure missed KVM's unique (ab)use of __print_symbolic().
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 7.2, take #2
- Move locking for kvm_io_bus_get_dev() into the caller, ensuring
race-free checks that the returned object is of the correct type
- Fix initialisation of the page-table walk level when relaxing
permissions
- Correctly update the XN attribute when relaxing permissions
- Fix the sign extension of loads from emulated MMIO regions
- Assorted collection of fixes for pKVM's FFA proxy, together with a
couple of FFA driver adjustments
|
