| Age | Commit message (Collapse) | Author |
|---|
|
Accessing debug/gpio is quite noisy without a get_direction()
implementation. To calm that down add an implementation.
Fixes: 3d50a2785271 ("gpio: palmas: Add support for Palmas GPIO")
Cc: stable@vger.kernel.org
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20260704-palmas-getdirection-v2-1-2fd85fee3832@kemnade.info
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Update amt_fill_info() to run under RCU read lock instead of RTNL.
The AMT device configuration fields (mode, relay_port, gw_port, local_ip,
discovery_ip, max_tunnels) and stream_dev pointer are initialized during
device creation (amt_newlink) and are immutable. Accessing them locklessly
is safe. The stream_dev net_device structure is protected from being freed
by RCU.
The only field that can change concurrently is amt->remote_ip, which is
updated in the packet receive path (amt_advertisement_handler) and
workqueue (amt_req_work). Add READ_ONCE()/WRITE_ONCE() annotations
around amt->remote_ip to prevent data races.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260701125016.3650708-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
RX prevention disabled
Add ethtool support to query and configure the PFC (Priority Flow Control)
storm prevention timeout. When TX continuously sends PFC frames, the peer
end is suppressed from sending packets. If this persists, a PFC frame storm
may occur.
This feature allows configuring a timeout to prevent such storms.
Signed-off-by: Hao Chen <chenhao418@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20260630134043.1532431-1-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The driver has an OF match table wired to .of_match_table, but does
not export the table with MODULE_DEVICE_TABLE().
Add the missing MODULE_DEVICE_TABLE(of, ...) entry so module alias
information is generated for OF based module autoloading.
This is a source-level fix. It does not claim dynamic hardware
reproduction; the evidence is the driver-owned match table, its use by
the platform driver, and the missing module alias publication.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260704122230.75964-1-pengpeng@iscas.ac.cn
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
The FILONOFF macro is never used in the driver, drop it.
No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/20260704151055.211082-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
nonseekable_open() never fails, so the error check is unnecessary.
Remove the dead error handling path.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260703020947.8010-1-phucduc.bui@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
commit 4827d6d83f07 ("drm/sched: Remove racy hack from
drm_sched_fini()") removed the necessity to mark an entity as stopped in
drm_sched_fini(). The documentation, however, still details that.
Update sched_entity's documentation.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20260629083631.2547199-2-phasta@kernel.org
|
|
__wait_for_resp() documents that it returns a non-zero error when a
firmware command does not complete, and bng_re_rcfw_send_message() already
marks the firmware as stalled when the helper returns -ENODEV.
However, the helper ignores wait_event_timeout() expiry. If the response
slot remains in use after the timeout and after the polled CREQ service
attempt, the loop starts another full timeout period and can repeat
forever.
Return -ENODEV after a timed out wait that still has no response. The
existing caller then marks FIRMWARE_STALL_DETECTED and returns
-ETIMEDOUT to the command issuer.
Fixes: 53c6ee7d7f68 ("RDMA/bng_re: Enable Firmware channel and query device attributes")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260625003614.27515-1-pengpeng@iscas.ac.cn
Reviewed-by: Siva Reddy Kallam <siva.kallam@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
There is a mix of 'mediatek' and 'mt7621' mix of prefix in different
function names along the code of the driver. Be consistent using 'mt7621'
for all function prefixes.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://patch.msgid.link/20260626060112.2498324-5-sergio.paracuellos@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into gpio/for-next
Linux 7.2-rc2
|
|
A user has reported that the driver works on the AiStone X4SP4NAL.
Add the necessary device descriptor and DMI entry to allow the driver
to automatically load on this device.
Reported-by: Michael Seifert <m.seifert@digitalernachschub.de>
Closes: https://github.com/Wer-Wolf/uniwill-laptop/pull/10
Tested-by: Michael Seifert <m.seifert@digitalernachschub.de>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260530170813.10166-7-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
A user has reported that the driver works on the MACHENIKE L16 Pro.
Add the necessary device descriptor and DMI entry to allow the driver
to automatically load on this device.
Reported-by: zatrit <zatrit@gmail.com>
Closes: https://github.com/Wer-Wolf/uniwill-laptop/pull/11
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260530170813.10166-6-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Some devices support a "USB powershare" feature where the system will
continue to provide power via the USB ports when hibernating or
powered off.
Add support for this feaure.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260530170813.10166-5-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Some devices support a "AC auto boot" feature where the system will
automatically boot when being connected to a power source.
Add support for this feature.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260530170813.10166-4-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The EC will report event 0xCC on some devices when the screen
has been enabled/disabled during resume/suspend. Ignore this
event because it is currently unused by the driver.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260530170813.10166-3-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Many Uniwill-based devices support either a white-only or fully
features RGB keyboard backlight. Add support for this feature
and handle the associated WMI events.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260530170813.10166-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add support for EC firmware 182LIMS1.111, found on the
MSI Raider A18 HX A9WJG.
The out-of-tree msi-ec driver probes successfully on this
machine and exports the msi-ec platform device. Without this
entry, the in-tree driver rejects the EC firmware as
unsupported.
Tested on MSI Raider A18 HX A9WJG with BIOS E182LAMS.31A.
Signed-off-by: David Glushkov <david.glushkov@sntiq.com>
Link: https://patch.msgid.link/20260528183358.552782-1-david.glushkov@sntiq.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
On models flagged with requires_fan_curve in the DMI power_data table
(30 entries), the BIOS ACPI method SPLX only writes PPT values to the
EC when the fan mode is set to Manual (FANM=4). FANM is set to 4 by
the DEFC method when a custom fan curve is written. Without an active
custom fan curve, the WMI DEVS call returns success but the firmware
silently ignores the PPT value, so userspace observes no effect from
its write.
Gate writes to ASUS_WMI_DEVID_PPT_{PL1_SPL,PL2_SPPT,PL3_FPPT,APU_SPPT,
PLAT_SPPT} on a check of asus_wmi_custom_fan_curve_is_enabled(), and
return -EBUSY with a pr_warn_once() when no fan curve is active on an
affected model. Export the helper from asus-wmi so asus-armoury can
call it across module boundaries.
Signed-off-by: Ahmed Yaseen <yaseen@ghoul.dev>
Reviewed-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260519181155.46044-2-yaseen@ghoul.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
In the ctl_value_index_valid() function, when validating 64-bit integer
controls (SND_CTL_ELEM_TYPE_INTEGER64), the error message for maximum
value validation has two bugs:
1. Uses snd_ctl_elem_info_get_max() instead of the 64-bit variant
snd_ctl_elem_info_get_max64()
2. Uses %ld format specifier instead of %lld for long long type
This is inconsistent with the minimum value validation (line 335-339)
which correctly uses get_min64() and %lld. The mismatch can cause:
- Incorrect maximum values being reported on some architectures
- Undefined behavior due to format specifier mismatch
- Potential crashes when printing the error message
Fix by using snd_ctl_elem_info_get_max64() and %lld format specifier
to match the data type and be consistent with the minimum value check.
Signed-off-by: Malaya Kumar Rout <malayarout91@gmail.com>
Link: https://patch.msgid.link/20260705171038.171966-1-malayarout91@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
I accidentally made an off-by-a-line mistake when mimicking other code
paths that set all channels. The mistake breaks sticky mixers with
multiple channels.
I didn't realize this mistake at that time, as my device's mixer is
single-channel.
Fix it, so that per-channel volume of sticky mixers is balanced.
Fixes: aa2f4addab44 ("ALSA: usb-audio: Set the value of potential sticky mixers to maximum")
Signed-off-by: Rong Zhang <i@rong.moe>
Link: https://patch.msgid.link/20260706-uac-sticky-channels-fix-v1-1-92741c538283@rong.moe
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
rt2x00lib_probe_dev() uses the full rt2x00lib_remove_dev() teardown for
all probe failures. However, drv_data allocation and workqueue allocation
can fail before intf_work, autowakeup_work and sleep_work have been
initialized.
Do not enter the full remove path until the probe has reached the point
where those work items are set up. Return directly for drv_data allocation
failure, and use a small early cleanup path for workqueue allocation
failure.
This issue was found by our static analysis tool and then confirmed by
manual review of rt2x00lib_probe_dev() and rt2x00lib_remove_dev(). The
early probe exits should not call a common teardown path that assumes the
later work setup has already completed.
A QEMU PoC forced alloc_ordered_workqueue() to fail before the work
initializers are reached. The resulting fail path entered
rt2x00lib_remove_dev(), and DEBUG_OBJECTS reported invalid work drains with
rt2x00lib_probe_dev() and rt2x00lib_remove_dev() in the stack.
Fixes: 1ebbc48520a0 ("rt2x00: Introduce concept of driver data in struct rt2x00_dev.")
Fixes: 0439f5367c8d ("rt2x00: Move TX/RX work into dedicated workqueue")
Cc: stable@vger.kernel.org
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Link: https://patch.msgid.link/20260619073104.1809161-1-runyu.xiao@seu.edu.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In order for the firmware to sleep, the driver has to confirm a
previously received sleep request. The normal sequence of evets goes
like this:
EVENT_SLEEP -> adapter->ps_state = PS_STATE_PRE_SLEEP -> sleep-confirm
-> SLEEP -> EVENT_AWAKE -> AWAKE.
Before sending the sleep-confirm command, the driver must make sure
there are no commands either running or waiting to be completed.
mwifiex_ret_802_11_associate() unconditionally sets
ps_state = PS_STATE_AWAKE when it processes the association command
response, outside of the normal powersave management flow. If
EVENT_SLEEP arrives while the association command is in flight,
ps_state is PRE_SLEEP when the association command response is parsed,
and the forced AWAKE overwrites it. The deferred sleep-confirm is
never sent.
A subsequent scan_start command is correctly acknowledged, but the
firmware doesn't generate scan_result events. The scan request never
finishes, and additional requests from userspace fail with -EBUSY.
After testing on both IW412 and W8997, I could only trigger the bug on
the IW412 and observed the firmwares behave differently. On the IW412
the firmware still sends EVENT_SLEEP while the authentication /
association process is ongoing. A W8997 under the same
conditions seems to suppress power-save for the duration of the
association, so PRE_SLEEP never coincided with the association response
even after extended periods of testing using the loops
described below (>12hours).
On the IW412, the delay between commands that triggers an EVENT_SLEEP
was empirically determined to be ~20ms. This delay can naturally occur
when the driver is outputting debugging information
(debug_mask = 0x00000037), in which situation the busy scans issue is
repeatable while running "test 1)" as described below. If the delay
between commands is less than ~20ms, the firmware stays awake and
the issue was not reproducible running the same test.
The host_mlme=false path also behaves differently. In this case, the
entire authentication / association transaction is executed by one
command (HostCmd_CMD_802_11_ASSOCIATE), and the firmware doesn't emit
EVENT_SLEEP while the command is running.
Remove the assignment so the ps_state is only manipulated in the paths
that are related to powersave event handling and on the main workqueue
for correct sleep confirmation.
The following loop tests were performed (with debugging output enabled):
1) force roaming between two AP's, one 5GHz and one 2.4GHz, same
SSID. Use wpa_cli to trigger the roaming behavior, sleep 2s
between iterations.
2) force a disconnection to AP 1 and a connection to AP 2, test
scan. Use wpa_cli to trigger the connection changes, sleep 2s
between iterations.
Each test ran in each device for at least 3 hours.
Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Rafael Beims <rafael.beims@toradex.com>
Reviewed-by: Jeff Chen <jeff.chen_1@nxp.com>
Link: https://patch.msgid.link/20260612122547.1586872-2-rafael@beims.me
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The ieee80211_nan_sched_cfg structure is too large to keep on the
per thread stack:
net/mac80211/nan.c:251:5: error: stack frame size (1560) exceeds limit (1536) in 'ieee80211_nan_set_local_sched' [-Werror,-Wframe-larger-than]
251 | int ieee80211_nan_set_local_sched(struct ieee80211_sub_if_data *sdata,
Allocate this dynamically using kmalloc_obj() to reduce the stack
usage of this function to a manageable 344 bytes for the same
configuration.
Fixes: 589c06e8fdee ("wifi: mac80211: add NAN local schedule support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260611130100.3387714-1-arnd@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When host MLME is enabled, mwifiex_cfg80211_authenticate() transmits the
authentication frame on a remain-on-channel (ROC) reservation so that the
frame is sent on the target BSS's channel. The ROC is only configured
when priv->auth_flag is zero.
priv->auth_flag is set to HOST_MLME_AUTH_PENDING when the auth frame is
queued and advances to HOST_MLME_AUTH_DONE once authentication
completes. It is only cleared back to zero on a disconnect, deauth or
timeout path; nothing clears it when an association succeeds. It therefore
stays at HOST_MLME_AUTH_DONE for the whole connected session.
When the station later roams to a BSS on a different channel, the next
authentication finds auth_flag != 0, skips the ROC setup, and the auth
frame is transmitted on the currently-associated channel instead of the
target's channel. Authentication times out on the new AP and the device
stays connected to the original AP.
Gate the ROC setup on HOST_MLME_AUTH_PENDING instead of on auth_flag
being completely clear. This re-arms the remain-on-channel for every new
authentication attempt, while still suppressing a redundant ROC during
the multi-frame SAE exchange, where auth_flag stays PENDING between the
commit and confirm frames.
This change was tested in 3 different devices:
Verdin AM62 (IW412 SD-UART) - (16.92.21.p142)
Verdin iMX8MM (W8997 SD-SD) - (16.68.1.p197)
Verdin iMX8MP (W8997 SD-UART) - (16.92.21.p137)
There following loop tests were performed:
1) force roaming between two AP's, one 5GHz and one 2.4GHz, same
SSID. Use wpa_cli to trigger the roaming behavior, sleep 2s
between iterations.
2) force a disconnection to AP 1 and a connection to AP 2, test
scan. Use wpa_cli to trigger the connection changes, sleep 2s
between iterations.
Each test ran in each device for at least 3 hours.
Fixes: 36995892c271 ("wifi: mwifiex: add host mlme for client mode")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Rafael Beims <rafael.beims@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20260610150021.1018611-1-rafael@beims.me
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for 7.3:
UAPI Changes:
- connector: Add color format property
Cross-subsystem Changes:
- dmem: introduce a peak file
Core Changes:
- atomic: Add create_state callback and helpers to all objects, add
documentation on atomic commit lifetime
- buddy: Fix use-after-free, add per-order free and used block
scoreboards
- gem: Remove DRIVER_GEM_GPUVA feature flag
- hdmi: Hook the color format property in the helpers
- mipi-dsi: Add MIPI_DSI_MODE_DSC_ALL_SLICES_IN_PKT flag
- sched: Add test suite for concurrent job submissions
- virtio: Add support for saving and restoring virtio_gpu_objects,
abort virtqueue wait on device removal to avoid hung task
Driver Changes:
- amdgpu: Implement "color format" DRM property
- amdxdna: Disable device buffer exporting
- ethosu: Add performance counter support
- msm: Support DSC configurations with slice_per_pkt > 1
- mxsfb: Fix disable sequence
- panthor: Support sparse mappings
- rockchip: Support YUV background color, Fix layer config timeout, add
edp support for rk3576, cleanups and formats improvements
- solomon: Add a batch command submission function
- tegra: Add DSI support for Tegra 20 and 30, fix dsi driver when the
firmware hasn't enabled the controller,
- v3d: Reduce PM runtime autosuspend delay, Scheduler and submission
fixes and refactoring, Deprecate V3D 3.3 and 4.1 support
- bridge:
- display-connector: don't autoenable HPD IRQ, trigger initial HPD
event for DP
- dw-dp: Null pointer dereference and use-after-free fixes
- ti-sn65dsi83: Remove NO_HFP and NO_HBP mode flags
- panel:
- himax-hx83121a: add backlight regulator support
- novatek-nt36672a: Inline panel init sequences
- panel-edp: Add quirks for AUO B116XAT04.3, CMN N116BCP-EA2, CSW
MNB601LS1-8, BOE NV116WH2-M30, BOE NT116WHM-N21, BOE NV116FH1-M31,
BOE NV116FH1-M30, NV140FHM-N5B, TM156VDXP25
- New panels: Samsung ATNA40HQ08-0, Anbernic TD4310, Chipone
ICNA35XX, Ilitek ILI9488
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patch.msgid.link/20260619-burgundy-termite-of-whirlwind-f7a4dd@houat
|
|
xfrm_hash_rebuild()'s first loop preallocates the bins/chains the reinsert
loop needs, so the reinsert (after hlist_del_rcu()) cannot allocate or
fail. But its guard is inverted: it skips policies with prefixlen <
threshold and preallocates for the rest.
prefixlen < threshold is exactly when policy_hash_bysel() returns NULL and
the reinsert takes the allocating xfrm_policy_inexact_insert() path. So the
loop preallocates for the exact policies (which never allocate) and skips
the inexact ones, whose bin/node is then allocated GFP_ATOMIC during
reinsert. On failure the error path only WARN_ONCE()s and continues,
leaving a poisoned bydst node; the next rebuild's hlist_del_rcu()
dereferences LIST_POISON2 and takes a GPF. Reachable under memory pressure,
deterministic via failslab.
Invert the guard so preallocation covers exactly the reinserted policies;
the reinsert then allocates nothing and cannot fail.
Crash:
Oops: general protection fault, probably for non-canonical address
0xfbd59c0000000024: 0000 [#1] SMP KASAN NOPTI
KASAN: maybe wild-memory-access in range [0xdead...]
...
Workqueue: events xfrm_hash_rebuild
RIP: 0010:xfrm_hash_rebuild+0x5b3/0x1190
RAX: dead000000000122 (LIST_POISON2 + offset)
...
Call Trace:
hlist_del_rcu (include/linux/rculist.h:599)
xfrm_hash_rebuild (net/xfrm/xfrm_policy.c:1365)
process_one_work (kernel/workqueue.c:3322)
worker_thread (kernel/workqueue.c:3486)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
...
Kernel panic - not syncing: Fatal exception in interrupt
Fixes: 24969facd704 ("xfrm: policy: store inexact policies in an rhashtable")
Reported-by: AutonomousCodeSecurity@microsoft.com
Signed-off-by: Xiang Mei (Microsoft) <xmei5@asu.edu>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
On the error path where in6_dev_get(dev) returns NULL, xfrm6_fill_dst()
releases the device reference with netdev_put() but leaves
xdst->u.dst.dev set. dst_destroy() later calls netdev_put(dst->dev)
again, so the same net_device reference is released twice, underflowing
its refcount (ref_tracker WARNING + "unregister_netdevice: waiting for
<dev> to become free").
Clear xdst->u.dst.dev after the netdev_put(), the same way the XFRM
device-offload paths xfrm_dev_state_add() and xfrm_dev_policy_add() in
net/xfrm/xfrm_device.c NULL ->dev when releasing the reference on error.
ref_tracker: reference already released.
ref_tracker: allocated in:
xfrm6_fill_dst (net/ipv6/xfrm6_policy.c:86)
...
udpv6_sendmsg (net/ipv6/udp.c:1696)
...
ref_tracker: freed in:
xfrm6_fill_dst (net/ipv6/xfrm6_policy.c:90)
...
WARNING: lib/ref_tracker.c:322 at ref_tracker_free+0x58b/0x780
dst_destroy (net/core/dst.c:115)
rcu_core
handle_softirqs
...
Fixes: 84c4a9dfbf43 ("xfrm6: release dev before returning error")
Reported-by: AutonomousCodeSecurity@microsoft.com
Signed-off-by: Xiang Mei (Microsoft) <xmei5@asu.edu>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
When iptfs_skb_add_frags() copies frag references from the source
frag walk into a new SKB, it increments the page reference count via
__skb_frag_ref() but does not propagate SKBFL_SHARED_FRAG to the
destination SKB's skb_shinfo->flags.
If the source SKB carries shared frags (e.g. from a page-pool backed
receive path), the new inner SKB will appear to ESP as having privately
owned frags. A subsequent esp_input() call for a nested transport-mode
SA then takes the no-COW fast path and decrypts in place, writing over
pages that are still referenced by the outer IPTFS SKB. This causes
kernel-visible memory corruption and can trigger a panic.
All other frag-transfer helpers in the kernel (skb_try_coalesce,
skb_gro_receive, __pskb_copy_fclone, skb_shift, skb_segment) correctly
propagate SKBFL_SHARED_FRAG; align iptfs_skb_add_frags() with this
convention by setting the flag inside the loop immediately after
__skb_frag_ref() and nr_frags++, so every exit path that attaches a frag
unconditionally propagates SKBFL_SHARED_FRAG.
Fixes: 5f2b6a909574 ("xfrm: iptfs: add skb-fragment sharing code")
Signed-off-by: Chen YanJun <moomichen@tencent.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
xfrm_state_gc_task can run long after a failed IPTFS state setup. In the
reproduced case, __xfrm_init_state() cached x->mode_cbs, IPTFS setup
returned -ENOMEM before publishing mode_data, and the temporary module
reference from xfrm_get_mode_cbs() was dropped immediately. The dead state
then kept x->mode_cbs until deferred GC ran after xfrm_iptfs had been
unloaded.
Clear x->mode_cbs when mode init or clone fails before publishing
mode_data. Those states never installed mode-specific state or the
long-term IPTFS module pin, so deferred GC has nothing mode-specific to
destroy and must not retain a callback table pointer past the temporary
lookup reference.
The buggy scenario involves two paths, with each column showing the order
within that path:
failed setup path:
1. cache x->mode_cbs
2. mode setup fails before mode_data
3. drop the temporary module ref
4. dead state keeps x->mode_cbs cached
GC/unload path:
1. xfrm_state_put() queues GC work
2. xfrm_iptfs unloads later
3. xfrm_state_gc_task runs
4. GC dereferences stale x->mode_cbs
This also covers the failed clone path where clone_state() returns before
publishing mode_data.
Validation reproduced this kernel report:
Kernel panic - not syncing: Fatal exception
CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
failslab_stacktrace_filter matched xfrm_iptfs frames
ack_error=-12
FAULT_INJECTION: forcing a failure
BUG: unable to handle page fault
Workqueue: events xfrm_state_gc_task
RIP: xfrm_state_gc_task+0x142/0x650
Modules linked in: esp4_offload xfrm_user [last unloaded: xfrm_iptfs]
Kernel panic - not syncing: Fatal exception
Fixes: 4b3faf610cc6 ("xfrm: iptfs: add new iptfs xfrm mode impl")
Assisted-by: Codex:gpt-5.5
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
The driver defines two device classes: "hfi1" (mode 0600) and
"hfi1_user" (mode 0666), selected by a user_accessible parameter to
hfi1_cdev_init(). The only caller always passes user_accessible=true,
so the "hfi1" class is registered but never used.
The 0600 class was originally used by the diagnostics UI char device
(hfi1_ui*), but that was removed over 10 years ago in commit
7312f29d8ee5 ("IB/hfi1: Remove UI char device"). The class and the
user_accessible parameter were left behind.
Remove the unused class and the user_accessible parameter.
Now that there's only one class, it might make sense to change its name
from "hfi1_user" to just "hfi1", but not knowing whether userspace would
mind, keep the name as is.
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Link: https://patch.msgid.link/20260701150510.384858-1-mschmidt@redhat.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Specific code, such as outlined KASAN checks, may be placed in
COMDAT-deduplicated sections. When linking modules as relocatable files,
the linker by default preserves such groups, potentially leaving multiple
copies in the resulting modules and unnecessary group metadata.
Use --force-group-allocation to have the linker resolve the COMDAT groups
and place their members as regular sections. The option is available from
ld.bfd 2.29 and ld.lld 19.1.0.
Remove the workaround in arch/arm64/include/asm/module.lds.h that was added
for the same problem but limited to CONFIG_KASAN_SW_TAGS and .text.hot.
Note that this code currently has no effect anyway because all .text.hot
sections are placed in the .text output section by scripts/module.lds.S,
since commit 1ba9f8979426 ("vmlinux.lds: Unify TEXT_MAIN, DATA_MAIN, and
related macros").
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20260612133139.1919042-1-petr.pavlu@suse.com
[nsc: Updated patch context in arch/arm64/include/asm/module.lds.h]
Signed-off-by: Nicolas Schier <nsc@kernel.org>
|
|
The original version of the candidate selection for DAT attempted to
compare both candidate and max_orig_node to identify which has the smaller
MAC address. This comparison is required as tie-break when a hash collision
happened.
But the used function returned 0 when the function was not equal and a
non-zero value when it was equal. As result, the actually selected
node was dependent on the order of entries in the orig_hash and not
actually on the mac addresses. The last originator in the hash collision
would always win.
To have a proper ordering, it must diff the actual MAC address bytes and
reject the candidate when the diff is not smaller than 0.
Cc: stable@vger.kernel.org
Fixes: 785ea1144182 ("batman-adv: Distributed ARP Table - create DHT helper functions")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
Before the access to struct batadv_tvlv_mcast_tracker's num_dests, it is
attempted to check whether enough space is actually in the network header.
But instead of using offsetofend() to check for the whole size (2) which
must be accessible, offsetof() of is called. The latter is always returning
0. The comparison with the network header length will always return that
enough data is available - even when only 1 or 0 bytes are accessible.
Instead of using offsetofend(), use the more common check for the whole
header.
Cc: stable@vger.kernel.org
Fixes: 07afe1ba288c ("batman-adv: mcast: implement multicast packet reception and forwarding")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
If the skb has a frag_list, it must be linearized before it can be split
using skb_split(). But when this step failed, it must not only free the skb
but also take care of the reference to the already found primary_if.
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: a063f2fba3fa ("batman-adv: Don't skb_split skbuffs with frag_list")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
The caller of batadv_frag_send_packet() assume that the skb provided to the
function are always consumed. But the pre-check for an empty payload or the
zero fragment size returned an error without any further actions.
A failed pre-check must use the same error handling code as the rest of the
function.
Cc: stable@vger.kernel.org
Fixes: ee75ed88879a ("batman-adv: Fragment and send skbs larger than mtu")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
A TT unicast TVLV contains the number of VLANs stored in it. This number is
an u16 and gets multiplied by the size of the struct
batadv_tvlv_tt_vlan_data (8 bytes). The size can therefore overflow the u16
used to store the tt_vlan_len. All additional safety checks to prevent
out-of-bounds access of the TVLV buffer are invalid due to this overflow.
Using size_t prevents this overflow and ensures that the safety checks
compare against the actual buffer requirements.
Cc: stable@vger.kernel.org
Fixes: 7ea7b4a14275 ("batman-adv: make the TT CRC logic VLAN specific")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
batadv_send_tt_request() allocates a tt_req_node when none exists for the
destination originator node. This should prevent that a multiple TT
requests are send at the same time to an originator.
But if allocation of the send buffer failed, this request must be cleaned
up again. But indicator for such a failure is "ret == false". But the
actual implementation is checking for "ret == true".
The check must be inverted to not loose the information about the TT
request directly after it was attempted to be sent out. This should avoid
potential request storms.
Cc: stable@vger.kernel.org
Fixes: 335fbe0f5d25 ("batman-adv: tvlv - convert tt query packet to use tvlv unicast packets")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
When an mesh interface is registered, it creates an untagged struct
batadv_meshif_vlan on top of it via the NETDEV_REGISTER notifier. But in
this process, another receiver of this notification can veto the
registration. The netdev registration will be aborted because of this veto.
The register_netdevice() call will try to clean up the net_device using
unregister_netdevice_queue() - which only uses the .priv_destructor to
free private resources. In this situation, .dellink will not be called.
The cleanup of the untagged batadv_meshif_vlan must thefore be done in the
destructor to avoid a leak of this object.
Cc: stable@vger.kernel.org
Fixes: 5d2c05b21337 ("batman-adv: add per VLAN interface attribute framework")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
On Xe3P, when PSR2 is enabled on a panel that does not support
Early Transport, DC3CO can be entered in the middle of an
active frame. This prevents the pipe from completing the frame
and leaves it in a bad state that does not recover well,
causing visible corruption on screen.
Set CHICKEN_DCPR_4 bit 24 in the PSR2 enable path when Early Transport
is not in use, to notify DMC to prevent DC3CO entry.
v2:
- Remove display from commit header (Suraj Kandpal).
- Add HSD number to intel_display_wa framework (Suraj Kandpal).
- Change register prefix from XE3LPD_ to XE3P_ (Suraj Kandpal).
BSpec: 71483, 75253
Signed-off-by: Dibin Moolakadan Subrahmanian <dibin.moolakadan.subrahmanian@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260701100650.1689665-2-dibin.moolakadan.subrahmanian@intel.com
|
|
Convert `use` imports to vertical layout for better readability and
maintainability.
Signed-off-by: Guru Das Srinagesh <linux@gurudas.dev>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
DSM TRIM currently always emits a single 512-byte page of LBA Range Entries
(ATA_MAX_TRIM_RNUM == 64 ranges), regardless of how many pages the device
can accept in one DATA SET MANAGEMENT command.
The maximum is reported by MAX PAGES PER DSM COMMAND (IDENTIFY DEVICE word
105). Honour it: size the TRIM descriptor as a whole number of 512-byte
pages, bounded by that limit and by the logical sector size (the WRITE SAME
data-out buffer is a single logical block). Build and transfer only as
many pages as the request needs, and set the DSM COUNT field, qc->nbytes
and the maximum WRITE SAME length in the Block Limits VPD page accordingly.
Build the descriptor straight into the WRITE SAME data-out buffer using an
atomic sg_miter mapping, instead of staging it in the shared ata_scsi_rbuf
and copying it out. This removes the global ata_scsi_rbuf_lock and a
memcpy from the TRIM path.
While commit 9379e6b8e0f9 ("libata: Safely overwrite attached page in WRITE
SAME xlat") replaced direct access to the data-out buffer with an
intermediate step that writes the entries in the ata_scsi_rbuf buffer, this
solution writes to the data-out buffer using sg_miter, which maps each
segment with kmap_atomic (SG_MITER_ATOMIC), so it's highmem- and
multi-segment-safe, and it's usable from the non-sleeping
command-submission path (unlike the page_address() access that
ata_scsi_rbuf originally replaced).
A 512-byte-sector device still uses a single page, so its behaviour is
unchanged.
Add ata_id_dsm_max_pages() to read IDENTIFY DEVICE word 105.
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
ata_scsi_write_same_xlat() translates a SCSI WRITE SAME command with the
UNMAP bit set into an ATA DATA SET MANAGEMENT TRIM command. The TRIM
descriptor is built by ata_format_dsm_trim_descr() into the 2048-byte
ata_scsi_rbuf staging buffer, and the number of bytes copied is compared
against the logical sector size by the caller:
size = ata_format_dsm_trim_descr(scmd, trmax, block, n_block);
if (size != len) /* len == sdp->sector_size */
goto invalid_param_len;
ata_format_dsm_trim_descr() clamps the copy length to ATA_SCSI_RBUF_SIZE
(2048). On a device whose logical sector size exceeds that (e.g. a 4Kn
device, where sector_size == 4096) the function can never return more than
2048, while the caller expects it to return sector_size. The comparison
therefore always fails, so every TRIM is rejected with "Parameter list
length error" and WARN_ON() splats on each attempt. TRIM / discard is
thus completely broken on such devices.
The descriptor was incorrectly sized from the logical sector size. A DSM
TRIM payload is a list of 512-byte pages, each holding up to
ATA_MAX_TRIM_RNUM (64) LBA Range Entries, and is independent of the logical
sector size. The Block Limits VPD page already advertises a single such
page as the maximum WRITE SAME length (65535 * ATA_MAX_TRIM_RNUM logical
blocks), so the block layer never sends a request that needs more than one
page.
Emit exactly one 512-byte page, independent of the logical sector size,
and transfer only that page (COUNT == 1). For a 512-byte-sector device
this is unchanged; devices with larger logical sectors now work instead of
failing every TRIM.
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Fixes: ef2d7392c4ec ("libata: SCT Write Same / DSM Trim")
Cc: stable@vger.kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
commands
Add support to ata_scsi_report_supported_opcodes() for the all command
format indicated with a reporting option of 0. The function
ata_scsi_report_all_supported_opcodes() is introduced to implement this
support. This function operates by testing all commands of the
ata_supported_cmds array and testing them using
ata_scsi_cmd_is_supported(), filling rbuf as it loops through all the
commands that libata can emulate or translate.
With this change, sg_opcodes /dev/sdX is able to list all commands
supported by libata and a device. An example below is shown for a SATA
disk also supporting CDL:
# sg_opcodes /dev/sda
ATA WDC WUH722626AL WZ41
Peripheral device type: disk
Opcode Service CDB RWCDLP, Name
(hex) action(h) size CDLP
-----------------------------------------------
00 6 0,0 Test Unit Ready
01 6 0,0 Rezero Unit
03 6 0,0 Request Sense
08 6 0,0 Read(6)
0a 6 0,0 Write(6)
0b 6 0,0 Seek(6)
12 6 0,0 Inquiry
15 6 0,0 Mode select(6)
1a 6 0,0 Mode sense(6)
1b 6 0,0 Start stop unit
1d 6 0,0 Send diagnostic
25 10 0,0 Read capacity(10)
28 10 0,0 Read(10)
2a 10 0,0 Write(10)
2b 10 0,0 Seek(10)
2f 10 0,0 Verify(10)
35 10 0,0 Synchronize cache(10)
55 10 0,0 Mode select(10)
5a 10 0,0 Mode sense(10)
7f 1ff0 32 0,0 ATA pass-through(32)
85 16 0,0 ATA pass-through(16)
88 16 1,1 Read(16)
8a 16 1,2 Write(16)
8f 16 0,0 Verify(16)
91 16 0,0 Synchronize cache(16)
9e 10 16 0,0 Read capacity(16)
a0 12 0,0 Report luns
a1 12 0,0 ATA pass-through(12)
a3 c 12 0,0 Report supported operation codes
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
|
|
CODES
Add support for the reporting options value 2 of the in REPORT SUPPORTED
OPERATION CODES command in ata_scsi_report_supported_opcodes(). With this
reporting option, the specified opcode to check must have a service
action. Use ata_scsi_supported_cmd_has_sa() to check for this and fill the
command reply buffer using the one command format based on the command
support.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
|
|
ata_scsi_report_supported_opcodes()
ata_scsi_report_supported_opcodes() is ignoring the service action
specified in the SCSI command CDB, but the one command format must take
this field into consideration. With the reporting options field set to 1,
the REPORT SUPPORTED OPERATION CODES command must be failed if the
specified opcode to check has service actions, while reporting option 3
must match supported opcodes together with the specified service action.
Stop ignoring the service action by passing it to
ata_scsi_cmd_is_supported() and searching for commands in the
array of supported commands (ata_supported_cmds) using both the command
opcode and service action.
Introduce the helper function ata_scsi_supported_cmd_use_sa() to determine
if a particular command has service actions and use this function to fail
a REPORT SUPPORTED OPERATION CODES command if such command is specified
with reporting options 1.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
|
|
ata_scsi_report_supported_opcodes() is very limited in functionality as it
lacks support for the all command format and also does not handle
correctly commands that have a service action.
In preparation for adding these missing features, refactor how
ata_scsi_report_supported_opcodes() operates to make modifications and
extensions easier. To do so, introduce the array of supported commands
ata_supported_cmds. This array entries are of type struct ata_scsi_cmd.
This structure stores the operation code, CDB length, and the service
action of a supported SCSI command that libata SAT can translate or
emulate. Since some service actions (e.g. ZI_REPORT_ZONES) can have a
value of 0, the field sa_valid of struct ata_scsi_cmd is used to indicate
if the sa field is valid, or if it should be ignored.
The helper function ata_scsi_get_supported_cmd() is implemented to search
for a particular command by opcode in this array. This function is used in
ata_scsi_cmd_is_supported() together with a struct ata_scsi_cmd_support to
check based on the target device features if the specified command is
supported.
ata_scsi_cmd_is_supported() is used as the main function in
ata_scsi_report_supported_opcodes() to determine if a particular command
is supported and fill the command reply rbuf as needed. In the case of a
command that is not supported, the support field is set to 1 as specified
in SPC, indicating that the command is not supported.
Of note is that the old ata_scsi_report_supported_opcodes() code did not
handle the VARIABLE_LENGTH_CMD/ATA_32 command which is supported and
translated by libata-scsi. The ata_supported_cmds array includes this
command. As commented in the code, WRITE_SAME_16 is left out of the array
of supported command ata_scsi_write_same_xlat() prevents the use of this
command as a passthrough command.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
|
|
The helper function ata_dev_is_zac() checks if a device is a ZAC class
device (host managed zoned disk) or if it is a host aware zoned disk, that
is, a regular ATA disk that supports the zoned capabilities. So the name
of this helper function is confusing as it hints at the first case only.
Rename this helper function to ata_dev_is_zoned() to avoid confusions and
better reflect the two cases tested. Use this helper in
ata_scsiop_inq_std(), ata_scsiop_read_cap() and
ata_scsi_report_supported_opcodes() instead of having the same tests open
coded.
While at it, to stay consistent with this renaming, also rename
ata_dev_config_zac() to ata_dev_config_zoned().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
|
|
The NFSD_CMD_UNLOCK_FILESYSTEM netlink command runs
nfsd4_cancel_copy_by_sb() before nfsd_mutex is held and before
nn->nfsd_serv is confirmed set, the same pre-mutex ordering the procfs
unlock_filesystem path carried. Once nfsd has shut down,
nfs4_state_destroy_net() has freed nn->conf_id_hashtbl but left the
pointer intact, so the cancel helper iterates freed slab memory as an
array of struct list_head and then dereferences a bogus nfs4_client
when it takes clp->async_lock. A local administrator holding
CAP_SYS_ADMIN can reach this use-after-free by stopping the server and
then issuing the command.
Move the async COPY cancel into the nfsd_mutex section, after
nn->nfsd_serv is confirmed, so every NFSv4 state-table walker on this
path observes a running server. Async copies exist only while the
server runs, so gating the cancel on nn->nfsd_serv loses nothing.
Fixes: 327c5168eff2 ("NFSD: Add NFSD_CMD_UNLOCK_FILESYSTEM netlink command")
Cc: stable@vger.kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260613-unlock-filesystem-uaf-v1-2-462b9bec8c84@kernel.org
Signed-off-by: Chuck Lever <cel@kernel.org>
|
|
In the `skip_invalidate:` path under `cifs_revalidate_mapping()`, the
sequence of calls:
clear_bit_unlock();
smp_mb__after_atomic();
wake_up_bit();
can be replaced exactly by `clear_and_wake_up_bit()`.
The `clear_and_wake_up_bit()` helper function was introduced in
'commit 8236b0ae31c83 ("bdi: wake up concurrent wb_shutdown()
callers.")' to replace equivalent instances of this sequence of
operations. This substitution has been applied in multiple subsystems.
Compile-tested with CONFIG_CIFS=y on x86_64, no new warnings present.
Suggested-by: Agatha Isabelle Moreira <code@agatha.dev>
Link: https://kernelnewbies.org/Beginner%20Cleanup%20and%20Refactor%20Tasks%20by%20Agatha%20Isabelle%20Moreira#task_010
Cc: Agatha Isabelle Moreira <code@agatha.dev>
Signed-off-by: Mehdi Hassan <mehdi.h.business@pm.me>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
|
