| Age | Commit message (Collapse) | Author |
|---|
|
Add embedded controller node for Hamoa/Purwa CRDs which adds fan control,
temperature sensors, access to EC internal state changes and suspend
entry/exit notifications to the EC.
Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Co-developed-by: Anvesh Jain P <anvesh.p@oss.qualcomm.com>
Signed-off-by: Anvesh Jain P <anvesh.p@oss.qualcomm.com>
Tested-by: Anthony Ruhier <aruhier@mailbox.org>
Link: https://lore.kernel.org/r/20260511-add-driver-for-ec-v9-4-e5437c39b7f8@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add embedded controller node for Glymur CRDs which adds fan control,
temperature sensors, access to EC state changes through SCI events
and suspend entry/exit notifications to the EC.
Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Co-developed-by: Anvesh Jain P <anvesh.p@oss.qualcomm.com>
Signed-off-by: Anvesh Jain P <anvesh.p@oss.qualcomm.com>
Tested-by: Anthony Ruhier <aruhier@mailbox.org>
Link: https://lore.kernel.org/r/20260511-add-driver-for-ec-v9-3-e5437c39b7f8@oss.qualcomm.com
[bjorn: Added i2c alias for &i2c9]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the interconnect paths to enable drivers to vote on them, ensuring
the necessary NoC bandwidth is available.
This hasn't been done before, as prior to commit 05566ebcc0cd
("clk: qcom: gcc-x1e80100: Keep GCC USB QTB clock always ON"), this
would cause an inexplicable crash upon resume from system suspend.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260410-topic-hamoa_usb_icc-v1-1-461e64304067@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the touchscreen device node for the HTC One (M8).
The downstream vendor kernel used an I2C frequency of 384 kHz
for this bus. Use the same value as the vendor.
Signed-off-by: Alexandre Messier <alex@me.ssier.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260406-m8-dts-additions-v2-4-c4c4bd50af48@me.ssier.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the required pin configuration to enable Bluetooth.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Alexandre Messier <alex@me.ssier.org>
Link: https://lore.kernel.org/r/20260406-m8-dts-additions-v2-3-c4c4bd50af48@me.ssier.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the NFC chip used in the HTC One M8 to its device tree.
The downstream vendor kernel used an I2C frequency of 384 kHz
for this bus. Use the same value as the vendor.
Signed-off-by: Alexandre Messier <alex@me.ssier.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260406-m8-dts-additions-v2-2-c4c4bd50af48@me.ssier.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add support for the notification LEDs on the HTC One M8.
Two LEDs are available, one orange and one green. Together,
they both form a single notification source, so use a
multicolor LED node to describe this arrangement.
Cc: Lee Jones <lee@kernel.org>
Cc: Pavel Machek <pavel@kernel.org>
Cc: linux-leds@vger.kernel.org
Signed-off-by: Alexandre Messier <alex@me.ssier.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260406-m8-dts-additions-v2-1-c4c4bd50af48@me.ssier.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
- Prevent OOB access in the resctrl code while offlining
CPUs when Intel SNC (Sub-NUMA Clustering) is enabled
(Reinette Chatre)
* tag 'x86-urgent-2026-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86,fs/resctrl: Prevent out-of-bounds access while offlining CPU when SNC enabled
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events fixes from Ingo Molnar:
- Fix a perf_event_attr::remove_on_exec bug for group events
(Taeyang Lee)
- Fix uprobes CALL emulation interaction with shadow stacks, and
add a testcase for this (David Windsor)
- Fix uprobes unregister bug (Jiri Olsa)
* tag 'perf-urgent-2026-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
uprobes/x86: Use proper mm_struct in __in_uprobe_trampoline
selftests/x86: Add shadow stack uprobe CALL test
x86/uprobes: Keep shadow stack in sync for emulated CALLs
perf/core: Detach event groups during remove_on_exec
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull futex fix from Ingo Molnar:
- Fix a futex-requeue deadlock detection regression (Thomas Gleixner)
* tag 'locking-urgent-2026-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex/requeue: Revert "Prevent NULL pointer dereference in remove_waiter() on self-deadlock""
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
"Misc irqchip driver fixes:
- Fix a resource leak in the RISC-V imsic-early driver (Haoxiang Li)
- Fix an OF node reference leak in the ARM gic-v3-its driver (Yuho
Choi)
- Fix a dangling handler function on module removal bug in the
TS-4800 ARM board irqchip driver (Qingshuang Fu)"
* tag 'irq-urgent-2026-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/ts4800: Fix missing chained handler cleanup on remove
irqchip/gic-v3-its: Fix OF node reference leak
irqchip/irq-riscv-imsic-early: Fix fwnode leak on state setup failure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A standard set of driver-specific fixes and quirks accumulated since
the merge window:
ASoC:
- SOF: Sanity check to prevent OOB reads
- rsnd: Fix clock leak and double-disable issues with PM
- tas675x: Misc fixes for register fields, etc
- lpass-va-macro: Correct codec version for Qualcomm SC7280
- amd-yc: DMIC quirk for Alienware m15 R7 AMD
Others:
- us144mkii: Fix a UAF on disconnect and anchor list corruption
- HD-audio: Realtek quirks for HP models"
* tag 'sound-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: rsnd: src: Add missing scu_supply clock to suspend/resume
Documentation: sound: tas675x: Fix temperature range and impedance documentation
ASoC: codecs: tas675x: Fix CHx temperature range register bit fields
ASoC: codecs: tas675x: use READ_ONCE for params to be used concurrently
ASoC: rsnd: adg: make rsnd_adg_clk_control() idempotent
ASoC: SOF: validate probe info element counts
ALSA: usx2y: us144mkii: fix work UAF on disconnect
ASoC: amd: yc: Add Alienware m15 R7 AMD to DMIC quirk table
ALSA: hda/realtek: Add quirk for HP Victus 16-e0xxx (88EE) to enable mute LED
MAINTAINERS: ASoC: SOF: add AMD reviewer for Sound Open Firmware
ASoC: codecs: lpass-va-macro: Fix LPASS Codec Version for SC7280
ALSA: us144mkii: capture_urb_complete: redundant usb_anchor_urb corrupts anchor list on each resubmission
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small set of fixes that came in since -rc1, we have one core fix for
shutting down target mode properly if the system suspends while it's
running plus a small set of fairly unremarkable device specific fixes.
There's also a couple of pure DT binding changes for Renesas SoCs, the
power domains one allows some SoCs to be correctly described with
existing code"
* tag 'spi-fix-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: rzv2h-rspi: Fix DMA transfer error handling for signal interruption
spi: dt-bindings: snps,dw-apb-ssi: add 'power-domains' property
spi: dt-bindings: snps,dw-apb-ssi: drop superfluous RZ/N1 entry
spi: dw: use the correct error msg if request_irq() fails
spi: dw: fix first spi transfer with dma always fallback to PIO
spi: core: Abort active target transfer on controller suspend
spi: sh-msiof: abort transfers when reset times out
|
|
Sending mail to Mark's Intel address results in the Intel mail server
rejecting the mail. Dave Hansen confirmed he left Intel. The kernel.org
address seems to work, but there was no reply from Mark on the discussion
about broken email settings and his maintainer entries.
So drop him from all maintainer entries and move him to credits.
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://patch.msgid.link/20260703173803.3589003-2-ukleinek@kernel.org
|
|
Correct the MMIO ranges and IRQs for T8122 I2C controllers.
They were mistakenly incorrect in the original commit. This
fix is required for i2c dependent hardware to function
correctly, i.e. audio codecs.
Tested on J613 (MacBook Air M3).
Fixes: c65ab4905e58 ("arm64: dts: apple: Initial t8122 (M3) device trees")
Signed-off-by: Michael Reeves <michael.reeves077@gmail.com>
Link: https://patch.msgid.link/20260629-t8122-i2c-fix-v1-1-cec044001550@gmail.com
Signed-off-by: Sven Peter <sven@kernel.org>
|
|
The SoCs that this driver actually works on all imply OF already. (ARM
selects USE_OF unless some archs are enabled that cannot be selected
together with ARCH_PXA or ARCH_MMP, ARM64 and RISCV select OF.)
With OF known to be enabled a few conditionals in the driver can be
simplified.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260705083910.3502207-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
devm_apple_sart_get() obtains the supplier platform device and attempts
to create a runtime-PM device link to it, but it ignores device_link_add()
failure. A consumer can then continue without the dependency that keeps
the SART supplier ordered and runtime-PM reachable.
Treat a failed device link as an error and drop the supplier device
reference before returning.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Joshua Peisach <jpeisach@ubuntu.com>
Link: https://patch.msgid.link/20260616005346.7862-1-pengpeng@iscas.ac.cn
Signed-off-by: Sven Peter <sven@kernel.org>
|
|
The IBTA Software Transport Verbs specification requires the QP,
Memory Window and Memory Region for a Bind Memory Window operation
to belong to the same HCA and protection domain.
rxe only checked the QP and MW protection domain for type 2 MWs.
Move the QP/MW PD check to the common bind path and also reject
binding an MW to an MR from a different PD.
Invalid bind requests continue to fail with IB_WC_MW_BIND_ERR.
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Zhiwei Zhang <202275009@qq.com>
Link: https://patch.msgid.link/tencent_FD4FB25AA4FFA845E63F5AC36CF4A46CDC0A@qq.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The NULL check before kvfree() is unnecessary and triggers a Coccinelle
warning, since kvfree() handles NULL arguments internally.
Reported by ifnullfree.cocci Coccinelle semantic patch script.
Signed-off-by: Vasileios Almpanis <vasilisalmpanis@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://patch.msgid.link/20260630133530.2577832-1-vasilisalmpanis@gmail.com
|
|
Pick up the upstream fix for consistency.
|
|
irdma_check_mem_contiguous() and irdma_check_mr_contiguous() verify that
PBL entries describe physically contiguous memory ranges.
Both functions calculate byte offsets using 32-bit operands. For example,
with 4 KiB pages, pg_size * pg_idx overflows 32-bit arithmetic when
pg_idx reaches 1048576. In the level-2 check, PBLE_PER_PAGE is 512, so
i * pg_size * PBLE_PER_PAGE overflows when i reaches 2048.
These values are reachable in the driver. For MRs, palloc->total_cnt
comes from iwmr->page_cnt, which is calculated by
ib_umem_num_dma_blocks(). The MR size is limited by IRDMA_MAX_MR_SIZE,
so a 4 GiB MR with 4 KiB pages can reach page_cnt of 1048576. PBLE
resources do not exclude this value either: for gen3, the limit is based
on avail_sds * MAX_PBLE_PER_SD, and MAX_PBLE_PER_SD is 0x40000, so 4 SDs
are enough for 1048576 PBLEs.
Cast one operand to u64 before the multiplications so that the offset
calculations are performed in 64-bit arithmetic.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Aleksandrova Alyona <aga@itb.spb.ru>
Link: https://patch.msgid.link/20260624144846.61242-1-aga@itb.spb.ru
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The irdma driver currently issues an unconditional PF reset whenever the
HMC Error interrupt (PFINT_OICR bit 26) fires:
if (event->reg & IRDMAPFINT_OICR_HMC_ERR_M) {
ibdev_err(&iwdev->ibdev, "HMC Error\n");
iwdev->rf->reset = true;
}
request_reset() issues an IIDC_PFR to ice. In practice a single HMC_ERR
can trigger cascading PF resets, IOMMU faults during teardown, and
teardown of every RDMA connection on the device.
i40e handles the identically-named interrupt by reading
PFHMC_ERRORINFO and PFHMC_ERRORDATA and logging them without touching
device state; see commit 9c010ee0ea5f ("i40e: Suppress HMC error to
Interrupt message level") which removed the reset as "not necessary".
This patch mirrors that handling on irdma.
With this change, repeated HMC_ERR no longer produces a reset storm and
RDMA traffic on the device continues uninterrupted.
Signed-off-by: Seyeong Kim <seyeong.kim@canonical.com>
Link: https://patch.msgid.link/20260619050044.1807044-1-seyeong.kim@canonical.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Prevent userspace from deregistering the MRs that back QP/CQ/SRQ rings
by bumping the MR's refcount upon association.
Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20260618201458.875740-5-jmoroni@google.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
These fields will be used in a subsequent commit which adds
refcounting to user CQ MRs.
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20260618201458.875740-4-jmoroni@google.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
User QP/CQ/SRQ rings are registered with the normal reg_mr
mechanism prior to creating the actual QP/CQ/SRQ object. In
order to prevent userspace from deregistering these special MRs
while the child object still exists, a refcount will be used.
This commit adds the refcount and logic to reject a dereg_mr
with active references. Subsequent commits will add logic to
bump this refcount when the user QP/CQ/SRQ objects are created.
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20260618201458.875740-3-jmoroni@google.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Simplify/dedup the irdma_del_memlist logic in preparation for
the QP/CQ/SRQ ring MR refcounting change that will follow in
a subsequent commit.
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20260618201458.875740-2-jmoroni@google.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
After commit f90fff1e152d ("posix-cpu-timers: fix race between
handle_posix_cpu_timers() and posix_cpu_timer_del()"), tsk->sighand is
stable in handle_posix_cpu_timers(), so it can use the plain
spin_lock_irqsave(&tsk->sighand->siglock).
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Bradley Morgan <include@grrlz.net>
Link: https://patch.msgid.link/akjp8AGpY8eJG5I1@redhat.com
|
|
usb_ep1_command_reply_dispatch() uses buf[0] as a command byte and then
reads command-specific fixed items from the same URB buffer. Several
paths use buf + 1, buf[1], buf[2], or buf + 3 without first proving that
urb->actual_length contains those bytes.
Add per-command length checks, use a payload length derived from the
bytes after the command byte for the control-state copy, and reject short
analog input payloads before the input helper reads fixed offsets from
the EP1 reply.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260705084601.56400-1-pengpeng@iscas.ac.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Similar to commit 67c738152207 ("ALSA: hda/realtek: fix mic boost on
Framework PTL") and previous quirks for Framework systems with
Realtek codecs.
0010 is another platform with an ALC285 which needs the same quirk.
Signed-off-by: Daniel Schaefer <dhs@frame.work>
Link: https://patch.msgid.link/20260705-framework-audio-ssid-0x0010-v1-1-fffc8996ac18@frame.work
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Wongi and Jungwoo decoded and reported a non-leader exec() related race
which can result in an UAF:
sys_timer_delete() exec()
posix_cpu_timer_del()
// Observes old leader
p = pid_task(pid, pid_type); de_thread()
switch_leader();
release_task(old_leader)
__exit_signal(old_leader)
sighand = lock(old_leader, sighand);
posix_cpu_timers*_exit();
sighand = lock_task_sighand(p) unhash_task(old_leader);
sh = lock(p, sighand) old_leader->sighand = NULL;
unlock(sighand);
(p->sighand == NULL)
unlock(sh)
return NULL;
// Returns without action
if(!sighand)
return 0;
free_posix_timer();
This is "harmless" unless the deleted timer was armed and enqueued in
p->signal because on exec() a TGID targeted timer is inherited.
As sys_timer_delete() freed the underlying posix timer object
run_posix_cpu_timers() or any timerqueue related add/delete operations on
other timers will access the freed object's timerqueue node, which results
in an UAF.
There is a similar problem vs. posix_cpu_timer_set(). For regular posix
timers it just transiently returns -ESRCH to user space, but for the use
case in do_cpu_nanosleep() it's the same UAF just that the k_itimer is
allocated on the stack.
Also posix_cpu_timer_rearm() fails to rearm the timer, which means it stops
to expire.
While debating solutions Frederic pointed out another problem:
posix_cpu_timer_del(tmr)
__exit_signal(p)
posix_cpu_timers*_exit(p);
unhash_task(p);
p->sighand = NULL;
sh = lock_task_sighand(p)
sighand = p->sighand;
if (!sighand)
return NULL;
lock(sighand);
if (!sh)
WARN_ON_ONCE(timer_queued(tmr));
On weakly ordered architectures it is not guaranteed that
posix_cpu_timer_del() will observe the stores in posix_cpu_timers*_exit()
when p->sighand is observed as NULL, which means the WARN() can be a false
positive.
Solve these issues by:
1) Changing the store in __exit_signal() to smp_store_release().
2) Adding a smp_acquire__after_ctrl_dep() into the !sighand path
of lock_task_sighand().
3) Creating a helper function for looking up the task and locking sighand
which does not return when sighand == NULL. Instead it retries the
task lookup and only if that fails it gives up.
4) Using that helper in the three affected functions.
#1/#2 ensures that the reader side which observes sighand == NULL also
observes all preceeding stores, i.e. the stores in posix_cpu_timers*_exit()
and the ones in unhash_task().
#3 ensures that the above described non-leader exec() situation is handled
gracefully. When the task lookup returns the old leader, but sighand ==
NULL then it retries. In the non-leader exec() case the subsequent task
lookup will observe the new leader due to #1/#2. In normal exit() scenarios
the subsequent lookup fails.
When the task lookup fails, the function also checks whether the timer is
still enqueued and issues a warning if that's the case. Unfortunately there
is nothing which can be done about it, but as the task is already not
longer visible the timer should not be accessed anymore. This check also
requires memory ordering, which is not provided when the first lookup
fails. To achieve that the check is preceeded by a smp_rmb() which pairs
with the smp_wmb() in write_seqlock() in __exit_signal(). That ensures that
the stores in posix_cpu_timers*_exit() are visible.
The history of the non-leader exec() issue goes back to the early days of
posix CPU timers, which stored a pointer to the group leader task in the
timer. That obviously fails when a non-leader exec() switches the leader.
commit e0a70217107e ("posix-cpu-timers: workaround to suppress the problems
with mt exec") added a temporary workaround for that in 2010 which survived
about 10 years. The fix for the workaround changed the task pointer to a
pid pointer, but failed to see the subtle race described above. So the
Fixes tag picks that commit, which seems to be halfways accurate.
Thanks to Frederic Weissbecker, Oleg Nesterov and Peter Zijlstra for
review, feedback and suggestions and to Wongi and Jungwoo for the excellent
bug report and analysis!
Fixes: 55e8c8eb2c7b ("posix-cpu-timers: Store a reference to a pid not a task")
Reported-by: Wongi Lee <qw3rtyp0@gmail.com>
Reported-by: Jungwoo Lee <jwlee2217@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: stable@vger.kernel.org
|
|
In find_controls(), card_data is allocated with malloc() but when
snd_ctl_open_lconf() fails, the code jumps to next_card without
freeing the allocated memory. This results in a memory leak for
each card where snd_ctl_open_lconf() fails.
Add free(card_data) before goto next_card to ensure proper cleanup
of the allocated memory in the error path.
Fixes: 5aaf9efffc57 ("kselftest: alsa: Add simplistic test for ALSA mixer controls kselftest")
Signed-off-by: Malaya Kumar Rout <malayarout91@gmail.com>
Link: https://patch.msgid.link/20260704105736.94874-1-malayarout91@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The VCAP instances on a chip are not independent, yet they are locked
independently. On sparx5 and lan969x the IS0 and IS2 instances are
backed by the same Super VCAP hardware block and share its cache and
command registers: every access drives the shared VCAP_SUPER_CTRL
register and moves data through the shared cache registers.
Accessing one instance therefore races with accessing another. The
per-instance admin->lock cannot prevent this, as each instance takes a
different lock.
The locking issue is mostly disguised by the fact that the core usage of
the vcap api runs under rtnl. However, the full rule dump in debugfs
decodes rules straight from hardware (a READ command followed by a cache
read) and runs outside rtnl, so it races a concurrent tc-flower rule
write to another Super VCAP instance.
Besides corrupting the dump, the read repopulates the shared cache
between the writers cache fill and its write command, so the writer
commits the wrong data and corrupts the hardware entry.
Introduce vcap_lock() and vcap_unlock() helpers and route every rule
lock site in the VCAP API and its debugfs code through them. Replace the
per-instance admin->lock with a single mutex in struct vcap_control that
serializes access to all instances. The helpers reach it through a new
admin->vctrl back-pointer, and the clients initialise and destroy the
control lock instead of a per-instance one.
No path holds more than one instance lock, so collapsing them onto a
single mutex cannot self-deadlock.
Fixes: 71c9de995260 ("net: microchip: sparx5: Add VCAP locking to protect rules")
Signed-off-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Link: https://patch.msgid.link/20260630-microchip_fix_vcap_locking-v1-1-f60a4596734d@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
llc_ui_autobind() opens a SAP after choosing a dynamic LSAP.
llc_sap_open() returns a reference owned by the caller, and
llc_sap_add_socket() takes a second reference for the socket's
membership in the SAP hash tables.
llc_ui_bind() drops the caller's reference after adding the socket,
but llc_ui_autobind() keeps it. When the socket is closed,
llc_sap_remove_socket() releases only the socket reference, leaving
the SAP on llc_sap_list with sk_count == 0.
This is user-visible because repeated autobind and close cycles can consume
all dynamic SAP values and make later autobinds fail with -EUSERS.
Drop the caller's reference after a successful autobind, matching
llc_ui_bind()'s ownership model.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Shuangpeng Bai <shuangpeng.kernel@gmail.com>
Link: https://patch.msgid.link/20260630194856.1036497-1-shuangpeng.kernel@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
register_aes_algs() registers the AEAD algorithms before registering the
skcipher algorithms. If skcipher registration fails, the function unwinds
the earlier AEAD registration with crypto_engine_unregister_aeads(), but it
passes ARRAY_SIZE(algs), which is the skcipher table size.
Use ARRAY_SIZE(algs_aead) for the AEAD unwind path so the unregister helper
iterates over the same table that was registered. Also clarify the nearby
comment: the crypto registration helpers clean up algorithms registered
within the same call, while this function must still unwind earlier
successful registration steps.
Fixes: 885743324513 ("crypto: keembay - Add support for Keem Bay OCS AES/SM4")
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
rk_hash_run() waits for RK_CRYPTO_HASH_STS to become idle after the
final DMA transfer, but ignores the poll result. If the hash engine
never becomes idle, the driver still reads the digest registers and
finalizes the request with the previous success value.
Store the poll result and finalize the request with the timeout error
before reading the digest registers.
Fixes: 37bc22159c45 ("crypto: rockchip - use read_poll_timeout")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
omap_rng_probe() enables runtime PM before acquiring and enabling the
functional clocks. Several later error paths returned or unwound without
undoing all state acquired so far.
If pm_runtime_resume_and_get() failed, the driver returned through the
generic ioremap error label and left runtime PM enabled. If either clock
lookup returned -EPROBE_DEFER, the function returned directly and skipped
the runtime PM cleanup; the register clock defer path could also leave the
already enabled functional clock prepared.
Route these failures through the existing unwind labels so each path only
undoes resources that were acquired successfully. Keep the resume failure
path limited to pm_runtime_disable(), and use the later labels only after
the runtime PM usage count or clocks have been acquired.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code.
Fixes: 61dc0a446e5d ("hwrng: omap - Fix assumption that runtime_get_sync will always succeed")
Fixes: 43ec540e6f9b ("hwrng: omap - move clock related code to omap_rng_probe()")
Fixes: b166be004491 ("hwrng: omap - Fix clock resource by adding a register clock")
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
xtrng_readblock32() polls for 16-byte chunks but returns the number of
bytes read even when the first poll times out. Its caller then treats a
zero return as a short successful read, and partial reads for full
32-byte blocks can make the tail copy use a fixed block offset rather
than the amount already produced.
Return the poll error when no data has been read, preserve partial
positive returns after some data is available, stop the generator on all
collection exits, and append tail bytes at the current output count.
Fixes: 8979744aca80 ("crypto: xilinx - Add TRNG driver for Versal")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
AF_ALG is a frequent source of vulnerabilities and a maintenance
nightmare. It exposes far more functionality to userspace than ever
should have been exposed, especially to unprivileged processes. Recent
exploits have targeted kernel internal implementation details like
"authencesn" that have zero use case for userspace access.
Fortunately, AF_ALG is rarely used in practice, as userspace crypto
libraries exist. And when it is used, only some functionality is known
to be used, and many users are known to hold capabilities already.
iwd for example requires CAP_NET_ADMIN and has a known algorithm list
(https://lore.kernel.org/linux-crypto/bcbbef00-5881-421b-8892-7be6c04b832d@gmail.com/).
Thus, let's restrict the set of allowed algorithms by default, depending
on the capabilities held.
Add a sysctl /proc/sys/crypto/af_alg_restrict with meaning:
0: unrestricted
1: limited functionality
2: completely disabled
Set the default value to 1, which enables an algorithm allowlist for
unprivileged processes and a slightly longer allowlist for privileged
processes.
Note that the list may be tweaked in the future. However, the common
use cases such as iwd and bluez are taken into account already. I've
tested that iwd still works with the default value of 1.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove algorithms that are either unsafe or deprecated and have no
in-kernel users that cannot be served by the ARM CE implementations.
AES-ECB reveals plaintext patterns (identical plaintext blocks produce
identical ciphertext blocks) and should not be exposed as a hardware-
accelerated primitive. DES, Triple DES and HMAC-SHA1 have been
deprecated for years.
Remove sha1, ecb(aes), ecb(des), cbc(des), ecb(des3_ede), cbc(des3_ede),
hmac(sha1) and all AEAD variants built on these primitives as well as
authenc(hmac(sha256),cbc(des)). Also clean up the - now dead - code,
flags and constants.
Cc: stable@vger.kernel.org
Acked-by: Eric Biggers <ebiggers@kernel.org>
Tested-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
mxs_dcp_aes_block_crypt() uses sg_dma_len() without mapping the source
scatterlist with dma_map_sg() first. Therefore, sg_dma_len() is invalid
and could return zero or a stale DMA length, causing encryption and
decryption to process the wrong number of bytes when
CONFIG_NEED_SG_DMA_LENGTH=y.
Use the original scatterlist length instead.
Fixes: 15b59e7c3733 ("crypto: mxs - Add Freescale MXS DCP driver")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
sa_ul_probe() calls sa_init_mem() to create the DMA pool used for
security context buffers, but ignores its return value. If pool creation
fails, probe still continues with DMA setup, algorithm registration and
child population even though later request setup depends on that pool.
Stop probing when sa_init_mem() fails, and route that failure to the PM
cleanup path without attempting to destroy an uncreated DMA pool.
Fixes: 7694b6ca649f ("crypto: sa2ul - Add crypto driver")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Since the crypto_rng interface for hardware PRNGs is unused and is
redundant with hwrng and the actual Linux RNG, it's being phased out.
Most drivers for it were already removed. Go ahead and remove the CAAM
support which is one of the only remaining ones.
Note that the CAAM support for hwrng remains in place. That is the
interface that actually matters.
Note that this code also had several issues, including dlen > 65535
causing corruption of the CAAM descriptor.
Cc: Gaurav Jain <gaurav.jain@nxp.com>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Since the crypto_rng interface for hardware PRNGs is unused and is
redundant with hwrng and the actual Linux RNG, it's being phased out.
Most drivers for it were already removed. Go ahead and remove the
sun8i-ss support which is one of the only remaining ones.
As usual for crypto_rng, this driver was also buggy: its ->generate()
function had a use-after-free vulnerability due to using
wait_for_completion_interruptible_timeout() without handling shutting
down the DMA operation if a signal is sent. Also, it had a buffer
overread bug in the line 'memcpy(ctx->seed, d + dlen, ctx->slen);'.
There's no point in fixing these bugs separately only to remove the code
anyway, so this commit is marked with Fixes and Cc stable.
Fixes: ac2614d721de ("crypto: sun8i-ss - Add support for the PRNG")
Cc: stable@vger.kernel.org
Cc: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Since the crypto_rng interface for hardware PRNGs is unused and is
redundant with hwrng and the actual Linux RNG, it's being phased out.
Most drivers for it were already removed. Go ahead and remove the
sun8i-ce support which is one of the only remaining ones.
Note that the sun8i-ce support for hwrng remains in place. That is the
interface that actually matters.
As usual for crypto_rng, this driver was also buggy: its ->generate()
function had a use-after-free vulnerability due to using
wait_for_completion_interruptible_timeout() without handling shutting
down the DMA operation if a signal is sent. There's no point in fixing
this separately only to remove the code anyway, so this commit is marked
with Fixes and Cc stable.
Fixes: 5eb7e9468884 ("crypto: sun8i-ce - Add support for the PRNG")
Cc: stable@vger.kernel.org
Cc: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The SEV-SNP firmware provides the SNP_VERIFY_MITIGATION command, which
can be used to query the status of currently supported vulnerability
mitigations and to initiate mitigations within the firmware.
This command is an explicit mechanism to ascertain if a firmware
mitigation is applied without needing a full RMP re-build, which is most
useful in a live firmware update scenario.
The firmware supports two subcommands: STATUS and VERIFY. The STATUS
subcommand is used to query the supported and verified mitigation bits.
The VERIFY subcommand initiates the mitigation process within the FW for
the specified vulnerability. Expose a userspace interface under:
/sys/firmware/sev/vulnerabilities/
- supported_mitigations (read-only): supported mitigation vector mask
- verified_mitigations (read/write): current verified mask; write a
vector to request VERIFY for that bit
The behavior of SNP_VERIFY_MITIGATION and the pre-requisites for using
it are bug-specific. Information about supported mitigations and its
corresponding vector is to be published as part of the AMD Security
Bulletin.
See SEV-SNP Firmware ABI specifications 1.58, SNP_VERIFY_MITIGATION for
more details.
Reviewed-by: Tycho Andersen (AMD) <tycho@kernel.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Pratik R. Sampat <prsampat@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Commit df12ef60c87b ("crypto: qce/sha - Do not modify scatterlist passed
along with request") removed the only use of sg_last, rendering the
scatterlist traversal useless. Remove it and its local variables.
Also remove the redundant hash_later check, inline the source offset,
and assign the number of complete blocks directly to req->nbytes.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
There's no need for devm_platform_ioremap_resource() to be so far down.
In fact, putting it up allows direct return instead of having to goto
some branch. Also, remove the error message as the function complains
loudly itself. No need to duplicate.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The nonblocking RNG path allocates a work_data structure to track the
state of an in-flight asynchronous I2C request. This pointer is stored
in rng->priv and later consumed by the read path once the transaction
completes.
If the underlying I2C transfer fails, the completion callback is invoked
with a non-zero status. In this case, the allocated work_data is not
usable for producing RNG output and must not remain associated with the
hwrng state.
Previously, the failure path only logged a warning but left the pointer
state uncleared, which can result in subsequent read attempts observing
stale state and interpreting it as valid completion data.
Fix this by freeing the pending work_data. The I2C transaction reports
an error. This ensures that failed requests do not leave residual state
behind that could be interpreted as valid RNG data on later reads.
Clearing rng->priv is done at the subsequent call to nonblocking read.
Fixes: da001fb651b0 ("crypto: atmel-i2c - add support for SHA204A random number generator")
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Assisted-by: Gemini:1.5 Pro [google]
Reviewed-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The hardware ECDH path in atmel_ecdh_compute_shared_secret() uses the
private key stored in the device. However, the public key is cached only
after atmel_ecdh_set_secret() successfully generated that private key
for the current tfm.
atmel_ecdh_generate_public_key() already rejects requests when no public
key is cached. Add the same check to atmel_ecdh_compute_shared_secret()
to prevent the device from using a private key that was not generated
for the current tfm.
Fixes: 11105693fa05 ("crypto: atmel-ecc - introduce Microchip / Atmel ECC driver")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
->curve_id is only set once, but never used - remove it.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
