| Age | Commit message (Collapse) | Author |
|---|
|
lpc32xx_xmit_dma() starts a DMA transfer and waits up to one second
for its completion, but it ignores the wait result and returns success
after unmapping the buffer.
A timed out read can therefore return success with incomplete data, and
a timed out write can continue the NAND operation without proof that the
DMA payload reached the controller.
Terminate the DMA channel on timeout, unmap the scatterlist through the
existing cleanup path, and return -ETIMEDOUT to the NAND read/write
callers. Initialize the shared cleanup-path result before using it for
dmaengine_prep_slave_sg() failures.
Fixes: 70f7cb78ec53 ("mtd: add LPC32xx MLC NAND driver")
Cc: stable@vger.kernel.org
Reviewed-by: Vladimir Zapolskiy <vz@kernel.org>
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
When device_register() or mtd_nvmem_add() fails inside
add_mtd_device() for a partition, the error handling triggers
mtd_release() via put_device() or device_unregister(). mtd_release()
calls release_mtd_partition() which frees the mtd_info structure.
However, callers such as mtd_add_partition() and add_mtd_partitions()
also call free_partition() in their error paths, resulting in a double
free.
Additionally, release_mtd_partition() hits WARN_ON(!list_empty(
&mtd->part.node)) because the partition node is still linked in the
parent's partitions list when the release callback fires from the
add_mtd_device() error path.
Fix this by overriding dev->type and dev->release before put_device()
in the error paths, so that device_release() invokes a no-op function
instead of mtd_release(). For the mtd_nvmem_add() failure case,
device_unregister() is replaced with device_del() to separate the
device removal from the final kobject reference drop, allowing the
override to take effect before put_device() is called.
The callers' error paths (list_del + free_partition) remain the sole
owners of mtd_info lifetime on add_mtd_device() failure, which is the
expected contract.
The normal partition teardown path is not affected: del_mtd_device()
goes through kref_put() -> mtd_device_release() -> device_unregister()
with dev->type still set to &mtd_devtype, so mtd_release() ->
release_mtd_partition() continues to work correctly for the regular
removal case.
Reported-by: syzbot+e9c76b56dc05023b8117@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e9c76b56dc05023b8117
Fixes: 19bfa9ebebb5 ("mtd: use refcount to prevent corruption")
Signed-off-by: Xue Lei <Xue.Lei@windriver.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Every MTD registration runs mtd_virt_concat_create_join(). Once a
virtual concat has already been registered, the function builds the same
name again and takes the equal-name branch. That branch skips to the
next item without freeing the newly allocated string.
Free the temporary name before continuing.
Fixes: 43db6366fc2d ("mtd: Add driver for concatenating devices")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
suspend/resume
The driver registers two distinct WMI devices: a control device
(BITLAND_WMI_CONTROL) and an event device (BITLAND_WMI_EVENT). During
the probe phase, the event device handling path returns early before
initializing the platform profile device (data->pp_dev), leaving it
NULL.
However, the PM sleep operations are registered globally for the WMI
driver and are triggered for both devices. When entering suspend, the
event device invokes bitland_mifs_wmi_suspend(), which passes the
uninitialized data->pp_dev (NULL) into laptop_profile_get(). This leads
to a NULL pointer dereference inside dev_get_drvdata(), causing a
kernel Oops and halting the suspend sequence.
Fix this by adding a validity check for data->pp_dev in both the suspend
and resume callbacks, safely skipping profile operations for the event
device.
Fixes: dc1ec4fa86b2 ("platform/x86: bitland-mifs-wmi: Add new Bitland MIFS WMI driver")
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Mingyou Chen <qby140326@gmail.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260701120140.430659-1-qby140326@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
dmi_get_system_info(...) can return NULL. Using that as %s arguments
of dev_info() would log "(null)" (as part of a message like
'... System Vendor: "(null)", Product Name: "(null)" ...'), which may
be confusing for users.
Use Elvis operator to print "(Unknown)" instead.
Fixes: 428b9fd2dce5 ("platform/x86/amd/pmc: Add delay_suspend module parameter")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202606251540.Nr2BtaNu-lkp@intel.com/
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Daniel Gibson <daniel@gibson.sh>
Link: https://patch.msgid.link/20260626220210.1761783-2-daniel@gibson.sh
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
lookup_bdev() blindly returns inode->i_rdev without validating it.
When a FUSE filesystem exposes a root inode with S_IFBLK mode but
i_rdev == 0 (via rootmode=060000), any subsequent mount attempt using
that path as a block device source propagates dev_t 0 into the
superblock machinery. After commit 9ee5f161a4db ("fs: maintain a
global device-to-superblock table") this triggers a WARNING in
super_dev_register().
Reject i_rdev == 0 early with -ENODEV since no real block device
driver registers major 0.
Reported-by: syzbot+72fe3ea5814121fbc76e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=72fe3ea5814121fbc76e
Signed-off-by: Yun Zhou <yun.zhou@windriver.com>
Link: https://patch.msgid.link/20260703065548.1135125-1-yun.zhou@windriver.com
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
Switch the iis clock error path to dev_err_probe(). This folds the
dev_err() and return into a single statement and, when devm_clk_get()
returns -EPROBE_DEFER, avoids logging a spurious error on every probe
retry while still recording the reason in the deferred-probe debugfs.
No functional change other than the demoted log level on deferred
probe; the returned error code is unchanged.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260701084336.308886-1-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Revision 2 of the CONNMARK target accepts user-controlled shift
parameters and applies them to 32-bit mark values in
connmark_tg_shift().
A shift_bits value of 32 or more triggers an undefined-shift bug when
the rule is evaluated. Invalid shift_dir values are also accepted and
silently fall back to the left-shift path.
Reject invalid revision-2 shift parameters in connmark_tg_check() so
malformed rules fail at installation time, before they can reach the
packet path.
Fixes: 472a73e00757 ("netfilter: xt_conntrack: Support bit-shifting for CONNMARK & MARK targets.")
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Zhengchuan Liang <zcliangcn@gmail.com>
Reported-by: Xin Liu <dstsmallbird@foxmail.com>
Assisted-by: Codex:GPT-5.4
Signed-off-by: Wyatt Feng <bronzed_45_vested@icloud.com>
Reviewed-by: Ren Wei <enjou1224z@gmail.com>
Reviewed-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Commit 9a05475cebdd ("ipvs: avoid kmem_cache_zalloc in
ip_vs_conn_new") changed ip_vs_conn_new() to allocate an ip_vs_conn
object with kmem_cache_alloc(). The function then initializes many
fields explicitly, but only resets in_seq.delta and out_seq.delta in the
two struct ip_vs_seq members.
That leaves init_seq and previous_delta uninitialized. This is normally
harmless while the corresponding IP_VS_CONN_F_IN_SEQ or
IP_VS_CONN_F_OUT_SEQ flag is clear. For connections learned from a sync
message, however, ip_vs_proc_conn() preserves those flags from
IP_VS_CONN_F_BACKUP_MASK and passes opt=NULL when the message omits
IPVS_OPT_SEQ_DATA. In that case the new connection can be hashed with
SEQ flags set but with the rest of in_seq/out_seq still containing stale
slab data.
When a packet for such a connection is later handled by an IPVS
application helper, vs_fix_seq() and vs_fix_ack_seq() use
previous_delta and init_seq to rewrite TCP sequence numbers. A malformed
sync message can therefore make forwarded packets carry stale slab bytes
in their TCP seq/ack numbers, and can also corrupt the forwarded TCP
flow.
Reset both struct ip_vs_seq members completely before publishing the
connection. This matches the existing "reset struct ip_vs_seq" comment
and keeps the sequence-adjustment gates inactive unless valid sequence
data is installed later.
Fixes: 9a05475cebdd ("ipvs: avoid kmem_cache_zalloc in ip_vs_conn_new")
Cc: stable@vger.kernel.org
Reported-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Reported-by: Yuxiang Yang <yangyx22@mails.tsinghua.edu.cn>
Reported-by: Ao Wang <wangao@seu.edu.cn>
Reported-by: Xuewei Feng <fengxw06@126.com>
Reported-by: Qi Li <qli01@tsinghua.edu.cn>
Reported-by: Ke Xu <xuke@tsinghua.edu.cn>
Assisted-by: Claude-Code:GLM-5.2
Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
When an ICMP Fragmentation Needed error is received for a tunneled IPVS
connection, ip_vs_in_icmp() recomputes the MTU that the original packet
can use by subtracting the tunnel overhead from the reported next-hop
MTU.
The current code always subtracts sizeof(struct iphdr), which is only
the IPIP overhead. For GUE and GRE tunnels, ipvs_udp_decap() and
ipvs_gre_decap() already compute the additional tunnel header length,
but that value is scoped to the decapsulation block and is lost before
the ICMP_FRAG_NEEDED handling. As a result, the ICMP error sent back to
the client advertises an MTU that is too large, so PMTUD can fail to
converge for GUE/GRE-tunneled real servers.
With a reported next-hop MTU of 1400, a GUE tunnel currently returns
1380 to the client. The correct value is 1368:
1400 - sizeof(struct iphdr) - sizeof(struct udphdr) -
sizeof(struct guehdr)
Hoist the tunnel header length into the main ip_vs_in_icmp() scope and
subtract sizeof(struct iphdr) + ulen in the Fragmentation Needed path.
The IPIP path keeps ulen as 0, so its existing 1400 - 20 = 1380 result
is unchanged.
Fixes: 508f744c0de3 ("ipvs: strip udp tunnel headers from icmp errors")
Cc: stable@vger.kernel.org
Reported-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Reported-by: Yuxiang Yang <yangyx22@mails.tsinghua.edu.cn>
Reported-by: Ao Wang <wangao@seu.edu.cn>
Reported-by: Xuewei Feng <fengxw06@126.com>
Reported-by: Qi Li <qli01@tsinghua.edu.cn>
Reported-by: Ke Xu <xuke@tsinghua.edu.cn>
Assisted-by: Claude-Code:GLM-5.2
Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
The get command on intervals provide partial matches such as subranges
for usability reasons. However, an open interval has no closing end
element. If the closing element matches within the range of the open
internal, ie. its closest match is the start element of the open range,
then, return 0 but offer no matching element to userspace through
netlink as a special case. Userspace provides at least a matching start
element in this case and the closing end element matching the open
interal is ignored.
Another possibility is to report the matching start element of the open
interval for this end interval. However, this results in duplicated
matching being listed in userspace because userspace does not expect a
start element as response to a end element.
Fixes: 2aa34191f06f ("netfilter: nft_set_rbtree: use binary search array in get command")
Reported-by: Melbin K Mathew <mlbnkm1@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
The ah, hbh and rt matches check that the fixed extension header is
present, then use the header length field to derive the advertised
extension header length for matching.
For the ah match, add the missing advertised-length check. For hbh
and rt, update the existing advertised-length checks. In all three
cases, set hotdrop to true before returning false when the advertised
extension header length exceeds the available skb data.
Returning false treats the packet as a rule mismatch. Set hotdrop to
true and drop malformed packets so they cannot bypass rules intended
to drop packets with these IPv6 extension headers.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Zhixing Chen <running910@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
master on updates
Really cap it to NF_CT_EXPECT_MAX_CNT (255) on updates.
The commit ("netfilter: nfnetlink_cthelper: cap to maximum number of
expectation per master") only covers creation of helpers, not updates.
Fixes: 397c8300972f ("netfilter: nf_conntrack_helper: cap maximum number of expectation at helper registration")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
On links faster than ~34 Gbps, where byte rate may exceed 2^32-1
(~ 4.3 GBps), the comparison result becomes incorrect because the
truncated value no longer reflects the actual estimator rate.
Fix by changing the local variables to u64.
Fixes: 1c0d32fde5bd ("net_sched: gen_estimator: complete rewrite of rate estimators")
Signed-off-by: Feng Wu <wufengwufengwufeng@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
u32_match_it() executes rule-supplied shift operands on a 32-bit
value. A malformed u32 rule can provide a shift count of 32 or more,
triggering an undefined shift out-of-bounds during packet evaluation.
Validate XT_U32_LEFTSH and XT_U32_RIGHTSH operands in
u32_mt_checkentry() and reject malformed rules before they reach the
packet path.
Fixes: 1b50b8a371e9 ("[NETFILTER]: Add u32 match")
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Zhengchuan Liang <zcliangcn@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Assisted-by: Codex:GPT-5.4
Signed-off-by: Wyatt Feng <bronzed_45_vested@icloud.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
quoting sashiko:
------------------------------------------------------------------------
[..] noticed a potential memory bug and header corruption involving the
SIP NAT helper.
In net/netfilter/nf_nat_sip.c:nf_nat_sip():
if (skb_ensure_writable(skb, skb->len)) {
nf_ct_helper_log(skb, ct, "cannot mangle packet");
return NF_DROP;
}
uh = (void *)skb->data + protoff;
uh->dest = ct_sip_info->forced_dport;
if (!nf_nat_mangle_udp_packet(skb, ct, ctinfo, protoff,
0, 0, NULL, 0)) {
If a cloned or fragmented SKB is reallocated by skb_ensure_writable(), the
old data buffer is freed. However, nf_nat_sip() fails to update *dptr to
point to the new buffer.
It also appears to use nf_nat_mangle_udp_packet() on what could be a TCP
packet, which would overwrite the sequence number with a checksum update.
------------------------------------------------------------------------
nf_conntrack_sip linerizes skbs, hence no fragmented skb can be seen.
But clones are possible, so rebuild dptr.
Disable nf_nat_mangle_udp_packet() branch for TCP streams.
It doesn't look like this can ever happen, else we should have received
bug reports about this, so just check the conntrack is UDP and drop
otherwise.
The calling conntrack_sip set ->forced_dport for SIP_HDR_VIA_UDP messages,
so I don't think this is ever expected to be true for a TCP stream.
Fixes: 7266507d8999 ("netfilter: nf_ct_sip: support Cisco 7941/7945 IP phones")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
The loop in intel_dp_check_mst_status() keeps servicing interrupts
originating from the sink without bound. Add an upper bound to the new
interrupts occurring during interrupt processing to not get stuck on
potentially stuck sink devices. Use arbitrary 32 tries to clear incoming
interrupts in one go.
Discovered using AI-assisted static analysis confirmed by Intel Product
Security.
Note: The condition likely pre-dates the commit in the Fixes: tag, but
this is about as far back as a backport has any chance of
succeeding. Before that, the retry had a goto.
Reported-by: Martin Hodo <martin.hodo@intel.com>
Fixes: 3c0ec2c2d594 ("drm/i915: Flatten intel_dp_check_mst_status() a bit")
Cc: stable@vger.kernel.org # v5.8+
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260625142204.1078287-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> says:
I will post DAI/Component/Card capsuling patch, but
current code makes old style / new style conversion difficult.
To make future conversions easier to understand, this patch clean up the
code a little. but no functional change.
Link: https://patch.msgid.link/87ik6zcu7g.wl-kuninori.morimoto.gx@renesas.com
|
|
We can get necessary info from mach. Let's cleanup sof_nocodec_setup().
Current code makes old style / new style conversion difficult.
To make future conversions easier to understand, this patch clean up the
code a little. but no functional change.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87fr23cu6w.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It has only 1 card (= sof_nocodec_card). No need to use parameter
to get it.
Current code makes old style / new style conversion difficult.
To make future conversions easier to understand, this patch clean up the
code a little. but no functional change.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87h5mjcu70.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
With the special d3cold handling in xe runtime suspend/resume separated,
unify the non-d3cold paths with i915. There are multiple changes here at
once that probably wouldn't make much sense to split out further.
Add the call to intel_display_driver_pm_runtime_suspend(), which, for
the time being, is a no-op. The intel_hpd_poll_enable() is called later.
Add the call to intel_display_driver_pm_runtime_suspend_late(), which
starts calling intel_display_power_runtime_suspend() and
intel_opregion_notify_adapter(). Deep down, the former should take care
of intel_dmc_wl_flush_release_work(), allowing us to drop the extra call
in xe_display_pm_runtime_suspend_late(). The intel_hpd_poll_enable()
call is also done here, postponed from the previous location in
xe_display_pm_runtime_suspend().
Add the call to intel_display_driver_pm_runtime_resume_early(), which
contains the intel_display_power_runtime_resume() and
intel_opregion_notify_adapter() counterparts to the calls in
intel_display_power_runtime_suspend_late().
Finally, intel_display_driver_pm_runtime_resume() replaces the direct
calls to intel_hpd_init(), intel_hpd_poll_disable(), and
skl_watermark_ipc_update(). (The hotplug poll enable/disable calls are
asymmetric.)
v2:
- Rebase, move placement of the calls
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/16205a1ee08e83f6e2f4dd30ed98fc043684a73e.1782913901.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add new display runtime PM hook xe_display_pm_runtime_resume_early(), to
be called before IRQ resume. This is initially a no-op placeholder.
Add comments on the timing relative to irq suspend/resume to all the
runtime PM hooks.
v2: Add stub for CONFIG_DRM_XE_DISPLAY=n
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260702071457.2985893-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
xe_display_pm_runtime_suspend_late()
Make the special d3cold paths completely separate from the rest of the
runtime pm calls.
The intel_dmc_wl_flush_release_work() call right after
xe_display_pm_suspend_late() might be completely redundant, but this
avoids any functional changes.
Wiggle the comment while at it. It gets duplicated for now, but this
will be addressed in the follow-up.
v2: Update comments
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/73693f137e9601e027ab7e7add2a7b08d5a2f675.1782913901.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add new high-level functions intel_display_driver_runtime_pm_enable()
and intel_display_driver_runtime_pm_disable() to abstract the low-level
functions intel_display_power_enable() and
intel_display_power_disable(), respectively.
The asymmetry in the "runtime pm enable/disable" and "pm runtime
suspend/etc" naming is intentional, with the latter intended to be
called from the PM hooks.
Suggested-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/c95cb644a35ede7d4d456fd1654ce0b42b6eea33.1782913901.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add new functions intel_display_driver_pm_runtime_suspend(),
intel_display_driver_pm_runtime_suspend_late(),
intel_display_driver_pm_runtime_resume_early(), and
intel_display_driver_pm_runtime_resume(). The IRQ suspend/resume is
meant to happen between the corresponding calls. For now,
intel_display_driver_pm_runtime_suspend() is empty, but is included for
completeness as a placeholder.
Initially, only migrate i915, as there are some differences with xe that
will be addressed later.
There's a functional change, which should be benign:
i915_pm_runtime_resume() moves intel_opregion_notify_adapter() call
slightly later.
In the interest of not introducing more severe functional changes, the
calls become slightly asymmetric. We might want to address this later.
v2:
- Rebase, move placement of suspend calls
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/81e29bd9bee6c023d079ab076af7dc4b7e8985ca.1782913901.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
In preparation for abstracting display runtime suspend/resume calls,
relocate opregion adapter notification and hotplug poll enable slightly
earlier. Even though this is intended to be a non-functional change, do
it as a separate step to pinpoint any issues here.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/00d016457a78589b97972203a52a390f5f1a3541.1782913901.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The vlv_suspend_complete() error path fails to call
intel_display_power_runtime_resume(). Fix it.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/b0c131ed970d16d0147c87ba583abe3a4ea36ed5.1782913901.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
All uncore suspend/resume calls are done on each gt. Follow suit in
vlv_suspend_complete() error path purely for completeness, even if
VLV/CHV only have one.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/e9dde426a8f84c75a5d61857c4259e562fa8ee41.1782913901.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add a regulator driver for the Spreadtrum/Unisoc SC2730 PMIC, used
e.g. with the UMS512 and UMS9230 SoCs. This version of the driver is
based on a downstream driver provided by Unisoc [1][2] and the existing
SC2731 driver.
[1]: https://github.com/MotorolaMobilityLLC/kernel-sprd/commit/30be0ddfe6b9a877fc9c328fbd2bae84e645eb31
[2]: https://github.com/MotorolaMobilityLLC/kernel-sprd/blob/android-13-release-tla33/drivers/regulator/sc2730-regulator.c
Signed-off-by: Zhongfa Wang <zhongfa.wang@unisoc.com>
[cleanup, adapt to new device tree requirements]
Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
Link: https://patch.msgid.link/20260701-sc2730-regulators-v7-2-6e145ce83657@abscue.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Generally userspace is supposed to explicitly clear freeze listeners
before they drop the refcount on the node ref to zero, but there's
nothing forcing that. Currently, in this scenario the freeze listener
remains in the freeze_listeners rbtree and in the remote node's freeze
listener list, even though the ref for which the listener is registered
is gone. This could potentially lead to a memory leak due to a refcount
cycle. Thus, remove the freeze listener in this scenario.
Cc: stable <stable@kernel.org>
Fixes: eafedbc7c050 ("rust_binder: add Rust Binder driver")
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260703-remove-freeze-on-remove-node-v3-1-6e0c4547af46@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The alsa_sound_init() function currently returns a hardcoded -EIO
if register_chrdev() fails, masking specific error codes from
__register_chrdev() such as -EINVAL, -ENOMEM, or -EBUSY.
Masking these failures under a generic -EIO makes system-level
diagnostics unnecessarily difficult. Propagating explicit error codes
from register_chrdev() is also an established convention widely
practiced across other subsystems.
Fix this by capturing and propagating the dynamic error code from
register_chrdev(). While at it, also assign the return value of
snd_info_init() to the 'err' variable instead of hardcoding -ENOMEM
to ensure consistency and future-proofing.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260703103840.253527-1-phucduc.bui@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
HP Laptop 15-dw0xxx with subsystem ID 103c:85f0 needs the
ALC236_FIXUP_HP_MUTE_LED_COEFBIT2 quirk to correctly disable and
enable the Audio Mute LED.
Add the missing quirk entry.
Signed-off-by: Federico Lombardo <lombardo.federico.lf@gmail.com>
Link: https://patch.msgid.link/20260702204347.187524-1-lombardo.federico.lf@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The previous conversion from nonseekable_open() to stream_open() retained
the existing error check.
Since stream_open() always returns 0, remove the dead error handling path.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260702084445.519669-8-phucduc.bui@gmail.com
|
|
The previous conversion from nonseekable_open() to stream_open() retained
the existing error check.
Since stream_open() always returns 0, remove the dead error handling path.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260702084445.519669-7-phucduc.bui@gmail.com
|
|
The previous conversion from nonseekable_open() to stream_open() retained
the existing error check.
Since stream_open() always returns 0, remove the dead error handling path.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260702084445.519669-6-phucduc.bui@gmail.com
|
|
nonseekable_open() always returns 0, so the error check is unnecessary.
Remove the dead error handling path.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260702084445.519669-5-phucduc.bui@gmail.com
|
|
nonseekable_open() always returns 0, so the error check is unnecessary.
Remove the dead error handling path.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260702084445.519669-4-phucduc.bui@gmail.com
|
|
nonseekable_open() always returns 0, so the error check is unnecessary.
Remove the dead error handling path.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260702084445.519669-3-phucduc.bui@gmail.com
|
|
The previous conversion from nonseekable_open() to stream_open() retained
the existing error check.
Since stream_open() always returns 0, remove the dead error handling path.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260702084445.519669-2-phucduc.bui@gmail.com
|
|
Using guard()s is cleaner and safer.
goldfish_tty_probe() is omitted due to the crossing err_unmap
goto-label. Using scoped_guard() does not look that nice there. Perhaps
if someone refactored the locked part into a separate function...
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://patch.msgid.link/20260703084717.176442-4-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
tty/goldfish.c is the only user of gf_write_ptr(). Move it there, drop
the unneeded casts, and name it appropriately.
FTR, the last non-tty user was removed in 2018 by 4ae0fe70a097 ("Delete
the goldfish_nand driver.").
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://patch.msgid.link/20260703084717.176442-3-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The field was never used.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://patch.msgid.link/20260703084717.176442-2-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The last user was removed in 2020 by commit c869eaa617e4 ("drivers:
staging: retire drivers/staging/goldfish").
Drop it.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://patch.msgid.link/20260703084717.176442-1-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Before Rust 1.29.0, Clippy introduced the `cast_lossless` lint [1]:
> Rust's `as` keyword will perform many kinds of conversions, including
> silently lossy conversions. Conversion functions such as `i32::from`
> will only perform lossless conversions. Using the conversion functions
> prevents conversions from becoming silently lossy if the input types
> ever change, and makes it clear for people reading the code that the
> conversion is lossless.
While this does not eliminate unchecked `as` conversions, it makes such
conversions easier to scrutinize. It also has the slight benefit of
removing a degree of freedom on which to bikeshed. Thus apply the
changes and enable the lint in the Binder Rust driver -- no functional
change intended.
Link: https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless [1]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Assisted-by: Codex:gpt-5
Signed-off-by: Tamir Duberstein <tamird@kernel.org>
Link: https://patch.msgid.link/20260526-binder-strict-provenance-v2-5-a41d89c29bc5@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In Rust 1.63.0, Clippy introduced the `as_underscore` lint [1]:
> The conversion might include lossy conversion or a dangerous cast that
> might go undetected due to the type being inferred.
>
> The lint is allowed by default as using `_` is less wordy than always
> specifying the type.
Always specifying the type is especially helpful in function call
contexts where the inferred type may change at a distance. Specifying
the type also allows Clippy to spot more cases of `useless_conversion`.
Several inferred conversions from `binder_uintptr_t` to the driver's
internal `u64` node identifiers are identity conversions. Although the
UAPI header retains `BINDER_IPC_32BIT` for userspace building against
older kernels, commit 1190b4e38f97 ("ANDROID: binder: remove 32-bit
binder interface.") removed kernel support for selecting that protocol.
Rust Binder therefore uses the 64-bit Binder protocol on every supported
architecture.
While this does not eliminate unchecked `as` conversions, it makes such
conversions easier to scrutinize. It also has the slight benefit of
removing a degree of freedom on which to bikeshed. Thus apply the
changes and enable the lint in the Binder Rust driver -- no functional
change intended.
Link: https://rust-lang.github.io/rust-clippy/master/index.html#as_underscore [1]
Assisted-by: Codex:gpt-5
Signed-off-by: Tamir Duberstein <tamird@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260526-binder-strict-provenance-v2-4-a41d89c29bc5@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In Rust 1.78.0, Clippy introduced the `ref_as_ptr` lint [1]:
> Using `as` casts may result in silently changing mutability or type.
While this does not eliminate unchecked `as` conversions, it makes such
conversions easier to scrutinize. It also has the slight benefit of
removing a degree of freedom on which to bikeshed. Thus apply the
changes and enable the lint in the Binder Rust driver -- no functional
change intended.
Link: https://rust-lang.github.io/rust-clippy/master/index.html#ref_as_ptr [1]
Assisted-by: Codex:gpt-5
Signed-off-by: Tamir Duberstein <tamird@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260526-binder-strict-provenance-v2-3-a41d89c29bc5@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In Rust 1.51.0, Clippy introduced the `ptr_as_ptr` lint [1]:
> Though `as` casts between raw pointers are not terrible,
> `pointer::cast` is safer because it cannot accidentally change pointer
> mutability or cast the pointer to other types like `usize`.
Apply the required changes and enable the lint in the Binder Rust driver
-- no functional change intended.
Link: https://rust-lang.github.io/rust-clippy/master/index.html#ptr_as_ptr [1]
Assisted-by: Codex:gpt-5
Signed-off-by: Tamir Duberstein <tamird@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260526-binder-strict-provenance-v2-2-a41d89c29bc5@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace the pointer-to-integer conversions in the Binder Rust driver
with calls to the strict provenance APIs.
The strict provenance APIs were stabilized in Rust 1.84.0 [1]. Since
commit f32fb9c58a5b ("rust: bump Rust minimum supported version to
1.85.0 (Debian Trixie)"), the minimum supported Rust version is 1.85.0,
so no polyfills are needed.
Link: https://blog.rust-lang.org/2025/01/09/Rust-1.84.0.html#strict-provenance-apis [1]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Assisted-by: Codex:gpt-5
Signed-off-by: Tamir Duberstein <tamird@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260526-binder-strict-provenance-v2-1-a41d89c29bc5@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rust binder resolved handle 0 to the context manager node, but it does not
reject the case where the caller owns the same node.
The C binder driver rejects transactions from the context-manager process
to handle 0 after resolving the target node. Match that behavior in Rust
Binder by rejecting handle 0 transactions when the resolved context-manager
node is owned by the calling process.
This applies to both synchronous and oneway transactions because both paths
resolve the target through Process::get_transaction_node().
Cc: stable <stable@kernel.org>
Fixes: eafedbc7c050 ("rust_binder: add Rust Binder driver")
Signed-off-by: Keshav Verma <iganschel@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260625103957.730-1-iganschel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Allocation's Drop walks the offsets array (binder_size_t = u64 entries),
cleaning up the objects, but it used usize instead of u64 for both the
stride and the per-entry read.
On 64-bit kernels (usize == u64) this is harmless, but on 32-bit kernels
it walks the 8-byte entries in 4-byte steps, iterating an N-entry array
2N times, and reads the always-zero high word as offset 0, cleaning up
the object at offset 0 N extra times. As a result the referenced node or
handle ends up with a lower reference count than it actually has (a
refcount over-decrement), and binder's reference accounting is corrupted;
for example, the owner can be notified of a strong reference release
(BR_RELEASE) even though references still remain.
Change the stride to u64, and read each entry as a u64, narrowing it to
usize with try_into().
On 32-bit ARM, when this over-decrement would drive a count below zero,
the driver's existing refcount guard refuses it and fires:
rust_binder: Failure: refcount underflow!
Cc: stable <stable@kernel.org>
Fixes: eafedbc7c050 ("rust_binder: add Rust Binder driver")
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/ahw3tFhLz9bMMJAO@v4bel
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
