| Age | Commit message (Collapse) | Author |
|---|
|
The aggr_reset_state() function uses timer_delete() (non-synchronous)
for the aggregation timer before proceeding to delete TID state and
before the structure is freed by callers like aggr_module_destroy().
If the timer callback (aggr_timeout) is executing when aggr_reset_state()
is called, the callback will continue to access aggr_conn fields like
rx_tid[] and stat[] which may be freed immediately after by
kfree(aggr_info->aggr_conn) in aggr_module_destroy().
Additionally, the timer callback can re-arm itself via mod_timer() while
aggr_reset_state() is running, creating a more complex race condition.
Use timer_delete_sync() instead to ensure any running timer callback
has completed before returning.
Fixes: bdcd81707973 ("Add ath6kl cleaned up driver")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Hodges <git@danielhodges.dev>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20260206185207.30098-1-git@danielhodges.dev
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
ath9k_hif_request_firmware() re-arms an asynchronous firmware load via
request_firmware_nowait(), passing hif_dev as the completion context, and
then still dereferences hif_dev:
dev_info(&hif_dev->udev->dev, "ath9k_htc: Firmware %s requested\n",
hif_dev->fw_name);
The re-armed callback ath9k_hif_usb_firmware_cb() runs on the "events"
workqueue and, when the firmware is missing, walks the retry chain into
ath9k_hif_usb_firmware_fail() -> complete_all(&hif_dev->fw_done). That
releases the wait_for_completion(&hif_dev->fw_done) in a concurrent
ath9k_hif_usb_disconnect(), which then kfree()s hif_dev. The trailing
dev_info() in the frame that re-armed the request can therefore read freed
memory (hif_dev->udev, the first field of struct hif_device_usb):
BUG: KASAN: slab-use-after-free in ath9k_hif_request_firmware
Read of size 8 ... by task kworker/...
ath9k_hif_request_firmware
ath9k_hif_usb_firmware_cb drivers/net/wireless/ath/ath9k/hif_usb.c:1247
request_firmware_work_func
Allocated by ...:
ath9k_hif_usb_probe drivers/net/wireless/ath/ath9k/hif_usb.c
Freed by ...:
ath9k_hif_usb_disconnect -> kfree drivers/net/wireless/ath/ath9k/hif_usb.c
The fw_done barrier only makes disconnect wait for the firmware chain to
*terminate*; it does not protect the outer ath9k_hif_request_firmware()
frame that re-armed the request and keeps touching hif_dev afterwards.
Drop the post-request dev_info(): it is the only use of hif_dev after the
async request is armed, and it is purely informational (the dev_err() on the
failure path runs only when request_firmware_nowait() did not arm a callback,
so hif_dev is still alive there).
This was first reported by syzbot as a single, non-reproduced crash that was
later auto-obsoleted, and was independently rediscovered by the reFuzz fuzzer,
which produced a C reproducer (USB-gadget connect/disconnect of an ath9k_htc
device whose firmware download fails). The vulnerable code is unchanged and
still present in v7.1-rc6, where the slab-use-after-free reproduces under KASAN
once the (sub-microsecond) race window is widened.
Fixes: e904cf6fe230 ("ath9k_htc: introduce support for different fw versions")
Reported-by: syzbot+50122cbc2874b1eb25b0@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=50122cbc2874b1eb25b0
Signed-off-by: Cheng Yongkang <teel4res@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20260605153210.20471-1-1020691186@qq.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Fix "concelable" -> "cancelable" in the comment above
io_uring_cmd_mark_cancelable(), and fix the memory ordering comment
in __io_uring_cmd_done() to reference io_do_iopoll() and
->iopoll_completed.
Signed-off-by: Yang Xiuwei <yangxiuwei@kylinos.cn>
Link: https://patch.msgid.link/20260702082937.3707134-3-yangxiuwei@kylinos.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
on self-deadlock""
The commit cited below should not have been merged. It attemted to fix an
existing problem ansd thereby introduced new problems by keeping the
pi_state in state Q_REQUEUE_PI_IN_PROGRESS and leaking it.
Based on the commit description the intention was to handle the case
when task_blocks_on_rt_mutex() returns -EDEADLK and the following
remove_waiter() dereferences the NULL pointer in waiter->task.
That is already handled by Davidlohr in commit 40a25d59e85b3
("locking/rtmutex: Skip remove_waiter() when waiter is not enqueued") and
requires no further acting.
Revert the commit breaking the "waiter == owner" case again.
Fixes: 74e144274af39 ("futex/requeue: Prevent NULL pointer dereference in remove_waiter() on self-deadlock")
Reported-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260701131150.0Ijhq4Dw@linutronix.de
Closes: https://lore.kernel.org/all/20260629020049.2082397-1-michael.bommarito@gmail.com
|
|
inv_icm45600_buffer_fifo_read() uses the FIFO_COUNT the device reports,
unclamped, as the length of a regmap_noinc_read() into the fixed
INV_ICM45600_FIFO_SIZE_MAX (8 KiB) st->fifo.data buffer. The only bound is
the caller's "max", which the interrupt path skips (it passes 0). A device,
or an attacker on the bus, reporting up to 65535 makes the read as large as
~1 MiB: a heap out-of-bounds write of device-controlled data.
Clamp st->fifo.count to the buffer capacity before the read, and allocate
the buffer with the same INV_ICM45600_FIFO_SIZE_MAX define, so the bound
and the allocation reference one constant. The clamp is a no-op for
conforming hardware.
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
device exposure
The driver currently exposes the IIO device to userspace before
completing sensor hub callback registration, and similarly removes
callbacks while the device can still be accessed during teardown.
This creates a timing window where userspace may enable the buffer
before callbacks are available. In such cases:
- samples can be dropped,
- buffered reads may observe stale or no data.
Reorder probe and remove paths to ensure callbacks are active before
device exposure and are removed after device is no longer accessible.
This avoids a race window leading to data loss.
Signed-off-by: Sanjay Chitroda <sanjayembeddedse@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
device exposure
The driver currently exposes the IIO device to userspace before
completing sensor hub callback registration, and similarly removes
callbacks while the device can still be accessed during teardown.
This creates a timing window where userspace may enable the buffer
before callbacks are available. In such cases:
- samples can be dropped,
- buffered reads may observe stale or no data.
Reorder probe and remove paths to ensure callbacks are active before
device exposure and are removed after device is no longer accessible.
This avoids a race window leading to data loss.
Signed-off-by: Sanjay Chitroda <sanjayembeddedse@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
exposure
The driver currently exposes the IIO device to userspace before
completing sensor hub callback registration, and similarly removes
callbacks while the device can still be accessed during teardown.
This creates a timing window where userspace may enable the buffer
before callbacks are available. In such cases:
- samples can be dropped,
- buffered reads may observe stale or no data.
Reorder probe and remove paths to ensure callbacks are active before
device exposure and are removed after device is no longer accessible.
This avoids a race window leading to data loss.
Signed-off-by: Sanjay Chitroda <sanjayembeddedse@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
exposure
The driver currently exposes the IIO device to userspace before
completing sensor hub callback registration, and similarly removes
callbacks while the device can still be accessed during teardown.
This creates a timing window where userspace may enable the buffer
before callbacks are available. In such cases:
- samples can be dropped,
- buffered reads may observe stale or no data.
Reorder probe and remove paths to ensure callbacks are active before
device exposure and are removed after device is no longer accessible.
This avoids a race window leading to data loss.
Signed-off-by: Sanjay Chitroda <sanjayembeddedse@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
device exposure
The driver currently exposes the IIO device to userspace before
completing sensor hub callback registration, and similarly removes
callbacks while the device can still be accessed during teardown.
This creates a timing window where userspace may enable the buffer
before callbacks are available. In such cases:
- samples can be dropped,
- buffered reads may observe stale or no data.
Reorder probe and remove paths to ensure callbacks are active before
device exposure and are removed after device is no longer accessible.
This avoids a race window leading to data loss.
Signed-off-by: Sanjay Chitroda <sanjayembeddedse@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
exposure
The driver currently exposes the IIO device to userspace before
completing sensor hub callback registration, and similarly removes
callbacks while the device can still be accessed during teardown.
This creates a timing window where userspace may enable the buffer
before callbacks are available. In such cases:
- samples can be dropped,
- buffered reads may observe stale or no data.
Reorder probe and remove paths to ensure callbacks are active before
device exposure and are removed after device is no longer accessible.
This avoids a race window leading to data loss.
Signed-off-by: Sanjay Chitroda <sanjayembeddedse@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
device exposure
The driver currently exposes the IIO device to userspace before
completing sensor hub callback registration, and similarly removes
callbacks while the device can still be accessed during teardown.
This creates a timing window where userspace may enable the buffer
before callbacks are available. In such cases:
- samples can be dropped,
- buffered reads may observe stale or no data.
Reorder probe and remove paths to ensure callbacks are active before
device exposure and are removed after device is no longer accessible.
This avoids a race window leading to data loss.
Signed-off-by: Sanjay Chitroda <sanjayembeddedse@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
device exposure
The driver currently exposes the IIO device to userspace before
completing sensor hub callback registration, and similarly removes
callbacks while the device can still be accessed during teardown.
This creates a timing window where userspace may enable the buffer
before callbacks are available. In such cases:
- samples can be dropped,
- buffered reads may observe stale or no data.
Reorder probe and remove paths to ensure callbacks are active before
device exposure and are removed after device is no longer accessible.
This avoids a race window leading to data loss.
Signed-off-by: Sanjay Chitroda <sanjayembeddedse@gmail.com>
Fixes: fc18dddc0625 ("iio: hid-sensors: Added device rotation support")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
The RB5gen2 is an embedded development platform for the
QCS8550, based on the Snapdragon 8 Gen 2 SoC (SM8550).
This change implements the main board, the vision mezzanine
will be supported in a follow up patch.
The main board has the following features:
- Qualcomm Dragonwing QCS8550 SoC
- Adreno GPU 740
- Spectra ISP
- Adreno VPU 8550
- Adreno DPU 1295
- 1 x 1GbE Ethernet (USB Ethernet)
- WIFI 7 + Bluetooth 5.4
- 1 x USB 2.0 Micro B (Debug)
- 1 x USB 3.0 Type C (ADB, DP out)
- 2 x USB 3.0 Type A
- 1 x HDMI 1.4 Type A
- 1 x DP 1.4 Type C
- 2 x WSA8845 Speaker amplifiers
- 2 x Speaker connectors
- 1 x On Board PDM MIC
- Accelerometer + Gyro Sensor
- 96Boards compatible low-speed and high-speed connectors [1]
- 7 x LED indicators (4 user, 2 radio, 1 power)
- Buttons for power, volume up/down, force USB boot
- 3 x Dip switches
On-Board PMICs:
- PMK8550 2.1
- PM8550 2.0
- PM8550VS 2.0 x4
- PM8550VE 2.0
- PM8550B 2.0
- PMR735D 2.0
- PM8010 1.1 x2
Product Page: [2]
[1] https://www.96boards.org/specifications/
[2] https://www.thundercomm.com/product/qualcomm-rb5-gen-2-development-kit
The default msi-map from sm8550.dtsi is deleted for both pcie0 and
pcie1. The QPS615 PCIe switch on each port exposes more than two
devices (1 USP + 3 DSPs), but Gunyah currently limits ITS device
mappings to two per root complex to save memory. With msi-map
present, the ITS MAPD command times out.
Deleting msi-map causes the DWC controller to fall back to its
internal iMSI-RX module, which handles MSIs without this limitation.
Signed-off-by: Joe Sandom <jsandom@axon.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260420-rb5gen2-dts-v4-5-b461909c2de8@axon.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Document the Qualcomm RB5gen2 from Thundercomm based on the
QCS8550 chipset from Qualcomm.
[1] https://www.thundercomm.com/product/qualcomm-rb5-gen-2-development-kit/
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Joe Sandom <jsandom@axon.com>
Link: https://lore.kernel.org/r/20260420-rb5gen2-dts-v4-4-b461909c2de8@axon.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Move qcom,gsi-loader and memory-region properties from individual board
DTS files into the SoC DTSI, since these are common to all SM8550-based
boards.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Joe Sandom <jsandom@axon.com>
Link: https://lore.kernel.org/r/20260420-rb5gen2-dts-v4-3-b461909c2de8@axon.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add labels to the root port nodes (pcie0_port0, pcie1_port0) to
allow board DTS files to reference them for adding endpoint devices
to each pcie root port.
Update the pcieport0 reference to pcie0_port0 in sm8550-hdk.dts and
sm8550-qrd.dts to match the label rename in sm8550.dtsi.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Joe Sandom <jsandom@axon.com>
Link: https://lore.kernel.org/r/20260420-rb5gen2-dts-v4-2-b461909c2de8@axon.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the MHI register regions to the pcie0 and pcie1 controller nodes
to expose link power state transition counters (L0s/L1/L1.1/L1.2/L2)
via debugfs. The PCIe host driver uses this region to read the
link_transition_count from the MHI registers.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Joe Sandom <jsandom@axon.com>
Link: https://lore.kernel.org/r/20260420-rb5gen2-dts-v4-1-b461909c2de8@axon.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add an IMEM on glymur which falls back to mmio-sram and define the
PIL relocation info region as its child, for post mortem tools to
locate the loaded remoteprocs.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Ananthu C V <ananthu.cv@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260424-glymur-imem-v5-2-18ede63cf063@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add compatible for Qualcomm's glymur IMEM, a block of sram which
can fall back to mmio-sram.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Ananthu C V <ananthu.cv@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260424-glymur-imem-v5-1-18ede63cf063@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the mode-switch property to the QMP combo PHY so that mode-switch
events are routed to it, allowing the PHY to enter DisplayPort Alternate
Mode. Expand the DP data-lanes assignment from two to four lanes to make
use of the full link bandwidth available in this configuration.
Signed-off-by: Mahadevan P <mahadevan.p@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260420-kodiak_4k-v1-1-83dfc66b8f06@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable secondary USB controller in host mode on lemans EVK Platform.
Secondary USB controller is connected to a Genesys Logic USB HUB GL3590
having 4 ports. The ports of hub that are present on lemans EVK standalone
board are used as follows:-
1) port-1 is connected to HD3SS3220 Type-C port controller.
2) port-4 is used for the M.2 E key on corekit. Standard core kit uses UART
for Bluetooth. This port is to be used only if user optionally replaces the
WiFi card with the NFA765 chip which uses USB for Bluetooth.
Remaining 2 ports will become functional when the interface plus mezzanine
board is stacked on top of corekit:
3) port-2 is connected to another hub which is present on the mezz through
which 4 type-A ports are connected.
4) port-3 is used for the M.2 B key for a 5G card when the mezz is
connected.
Secondary USB Controller
↓
GL3590 USB Hub (4 ports)
|
|-- Port 1 → HD3SS3220 Type‑C Port Controller → USB‑C Connector
|
|-- Port 2 → Mezzanine USB Hub (when mezz attached)
|
|-- Port 3 → M.2 B‑Key Slot (when mezz attached)
|
|-- Port 4 → M.2 E‑Key Slot
(Default: BT via UART;
USB only if NFA765 module is installed)
Mark the second USB controller as host only capable and add the HD3SS3220
Type-C port controller along with Type-C connector for controlling vbus
supply.
Signed-off-by: Swati Agarwal <swati.agarwal@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260406110113.1709886-3-swati.agarwal@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
controller
Rename the hd3ss3220_ instance to improve clarity and simplify usage when
adding a secondary port controller.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Swati Agarwal <swati.agarwal@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260406110113.1709886-2-swati.agarwal@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Reference the reserved memory region for audio PD dynamic loading
and remote heap requirements. Add the required VMID list for memory
ownership transfers.
Signed-off-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260418-hamoaaudio-v1-1-a92866f744a6@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the Cypress USB Type-C controller and associated connector.
The controller is connected over I2C12 and wired to the USB1 DWC3.
The USB-C connector routes both high-speed and super-speed signals.
Enable dual-role data and power over the USB-C connector.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260421101606.411335-1-loic.poulain@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Describe the PWM block on IPQ9574.
Although PWM is in the TCSR area, make pwm its own node as simple-mfd
has been removed from the bindings and as such hardware components
should have its own node.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://lore.kernel.org/r/20260406-ipq-pwm-v21-6-6ed1e868e4c2@outlook.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Describe the PWM block on IPQ5332.
Although PWM is in the TCSR area, make pwm its own node as simple-mfd
has been removed from the bindings and as such hardware components
should have its own node.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://lore.kernel.org/r/20260406-ipq-pwm-v21-5-6ed1e868e4c2@outlook.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Describe the PWM block on IPQ5018.
Although PWM is in the TCSR area, make pwm its own node as simple-mfd
has been removed from the bindings and as such hardware components
should have its own node.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://lore.kernel.org/r/20260406-ipq-pwm-v21-4-6ed1e868e4c2@outlook.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Describe the PWM block on IPQ6018.
Although PWM is in the TCSR area, make pwm its own node as simple-mfd
has been removed from the bindings and as such hardware components
should have its own node.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Co-developed-by: Baruch Siach <baruch.siach@siklu.com>
Signed-off-by: Baruch Siach <baruch.siach@siklu.com>
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://lore.kernel.org/r/20260406-ipq-pwm-v21-3-6ed1e868e4c2@outlook.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
IRQ_TYPE_xxx flags are not correct in the context of GPIO flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning: IRQ_TYPE_LEVEL_LOW = 8 = GPIO_TRANSITORY.
Correct the touchscreen irq-gpios to use proper flags, assuming the
author of the code wanted similar logical behavior:
IRQ_TYPE_LEVEL_LOW => GPIO_ACTIVE_LOW
Fixes: e46b455e67f8 ("arm64: dts: qcom: sm6115-pro1x: Add Goodix Touchscreen")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260413090527.53000-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add a node for the IMEM found on Milos, which contains pil-reloc-info
and the modem tables for IPA, among others.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260410-milos-imem-v3-2-d215385fa5ab@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The batadv_skb_set_priority() receives an SKB with the inner ethernet
header at position "offset". When it tries to extract the IPv4 and IPv6
header, it needs to skip the ethernet header to get access to the IP
header.
But for VLAN header, it performs the access with the struct vlan_ethhdr.
This struct contains both both the ethernet header and the VLAN header. It
is therefore incorrect to skip over the whole vlan_ethhdr size to get
access to the vlan_ethhdr.
Cc: stable@vger.kernel.org
Fixes: c54f38c9aa22 ("batman-adv: set skb priority according to content")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
Binbin Zhou <zhoubinbin@loongson.cn> says:
This series adds ASoC support for the Loongson-2K0300 SoC and its
associated development boards, including the CTCISZ Forever Pi and the
ATK-DL2K0300B.
Key changes:
- Extend DT bindings to support ls2k0300-i2s and new audio card
compatibles.
- Refactor the platform I2S driver to handle SoC differences via per-device
configuration (rev_id, optional APB DMA config, reset sequence).
- Refactor the audio machine driver to support board-specific DAI formats,
GPIO-based headphone detection/control, speaker enable, and DAPM routing.
- Add jack detection and automatic switching between headphones and
speakers for the DL2K0300B board.
The patchset also cleans up the existing audio card binding by
referencing the common sound-card properties, and adds new compatibles
for the Loongson-2K0300 variants with proper DAI format handling.
All changes have been tested on Loongson-2K2000 (PCI), Loongson-2K0300
Forever Pi and Loongson-2K0300 DL2K0300B boards.
Link: https://patch.msgid.link/cover.1782439646.git.zhoubinbin@loongson.cn
|
|
The ES8328 codec has differential/single-ended microphone inputs
(LINPUT1/RINPUT1, LINPUT2/RINPUT2) that require connection to the
internal Mic Bias generator for proper operation. Currently, these
routes are missing, which can cause microphone recording to fail.
Add the missing DAPM routes to link the input pins to the Mic Bias
supply, ensuring the microphone bias voltage is correctly applied.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://patch.msgid.link/dcf1f8ae4f1f192a1d63e9fe7044b0218119b5eb.1782439646.git.zhoubinbin@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Extend the Loongson audio machine driver with jack detection, DAPM
widgets support, enabling proper switching between headphones and
speakers on the Loongson-2K0300 ATK-DL2K0300B board.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://patch.msgid.link/c4b1503220b6fb433ecdcb881556827579041c3d.1782439646.git.zhoubinbin@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add new compatible for the ATK-DL2K0300B development board based on
Loongson-2K0300.
Unlike others, this board features GPIO-controlled headphone detection,
headphone control, and speaker enable.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://patch.msgid.link/71430fcee5951fb7a7d52e2091a87707db85e06c.1782439646.git.zhoubinbin@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The Loongson-2K0300 audio card uses a different DAI format compared to
existing Loongson platforms.
Move the dai_fmt setting from the static DAI link to runtime hw_params
via snd_soc_runtime_set_dai_fmt(), and pass the correct format through
driver match data.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://patch.msgid.link/ed1314e1d3275fd20aff47397345a88fad6e9368.1782439646.git.zhoubinbin@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a new compatible string `loongson,ls2k0300-forever-pi-audio-card`
for the audio card on Loongson-2K0300 ctcisz forever pi SoC. It uses a
different DAI format compared to existing Loongson platforms.
The existing "loongson,ls-audio-card" remains valid for LS7A,
Loongson-2K1000 and Loongson-2K2000.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/183d809cd51874bcb78743273e4b7617f120fedb.1782439646.git.zhoubinbin@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Reference the common sound card properties. This allows removing the
`model` property and directly using the common `audio-routing` property
later on.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://patch.msgid.link/fa72a429a9d076d381f7d514184f19d5a35ffa51.1782439646.git.zhoubinbin@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The Loongson-2K0300 I2S interface differs significantly from the
Loongson-2K1000. Although both utilize external DMA controllers, the
Loongson-2K0300 does not require additional registers for routing
configuration.
Due to hardware design flaw, an extra controller reset sequence is
required during probe.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://patch.msgid.link/4d3caa62d4275e1495505387198408f4d30d453c.1782439646.git.zhoubinbin@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a new compatible string `loongson,ls2k0300-i2s` for the I2S
controller found on Loongson-2K0300 SoC.
Unlike Loongson-2K1000, Loongson-2K0300 does not require the second
register region for APB DMA configuration, so update the binding to
allow a single reg entry.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://patch.msgid.link/af092f9eabdc170c3d7951b29eee6512f748eb48.1782439646.git.zhoubinbin@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In loongson_card_parse_acpi(), the return value of
device_property_read_string() for the `codec-dai-name` property was
ignored. If the property is missing or invalid, an uninitialized pointer
would be used later, potentially leading to undefined behavior.
Fix this by checking the return value and propagating the error
appropriately.
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/cover.1780538113.git.zhoubinbin@loongson.cn?part=5
Fixes: ddb538a3004b ("ASoC: loongson: Factor out loongson_card_acpi_find_device() function")
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://patch.msgid.link/08e44a54708eae053be148524346bb8dfcd55b03.1782439646.git.zhoubinbin@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
devm_clk_get() may return different error codes, including -EPROBE_DEFER.
The current code overwrites the original error with -ENOENT, preventing
deferred probing from working correctly.
Replace dev_err() with dev_err_probe() so the original error code is
preserved and propagated to the caller.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260701080517.298294-1-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The task_prctl hook comment incorrectly described the hook as checking
whether a prctl operation is allowed. In reality, the hook exists for
LSMs to handle LSM-specific prctl operations.
Update the function description and kernel-doc comment to reflect the
actual behavior. The old wording appears to have been copied from other
permission-check hooks despite differing semantics.
Signed-off-by: Bill Roberts <bill.roberts@arm.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
[PM: subj tweak, comment tweak -> "prctl to prctl()" ]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The YY3588 is a single board computer based on the Rockchip RK3588.
Add devicetree binding documentation for it.
Signed-off-by: Daniele Briguglio <hello@superkali.me>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260610-yy3588-board-v1-2-4bb7176b6826@superkali.me
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Youyeetoo is the single board computer brand of Hong Kong Cybodev
Tech Limited.
Link: https://www.youyeetoo.com
Signed-off-by: Daniele Briguglio <hello@superkali.me>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260610-yy3588-board-v1-1-4bb7176b6826@superkali.me
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add the missing Broadcom Wi-Fi and Bluetooth child nodes for the
9Tripod X3568 v4 board.
The Bluetooth subnode is attached to uart8 with hardware flow control
enabled via RTS/CTS pins.
The Wi-Fi subnode is connected via the sdmmc2 bus.
Additionally, change the status of the i2s3_2ch node to "disabled"
since the required rk3568-codec-digital driver for Bluetooth audio
is currently unavailable in the mainline tree.
Signed-off-by: Coia Prant <coiaprant@gmail.com>
Link: https://patch.msgid.link/20260701185657.4092955-1-coiaprant@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
scu_supply is enabled alongside scu and scu_x2 during normal SRC
operation, but rsnd_src_suspend() and rsnd_src_resume() only disable
and re-enable scu and scu_x2. The supply clock is left enabled across
a system suspend and its prepare/enable refcount becomes unbalanced
after a suspend/resume cycle.
Disable scu_supply in rsnd_src_suspend() and re-enable it in
rsnd_src_resume() so the SRC clocks are managed consistently across
system PM transitions.
Fixes: ef19ecf042b4 ("ASoC: rsnd: Add system suspend/resume support")
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20260630175329.4145703-1-john.madieu.xa@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
9Tripod X3568 v4
The 'gpio' property for fixed regulators has been deprecated in favor
of the plural 'gpios' form according to the regulator-fixed binding.
Update the USB host and USB OTG fixed regulators for the 9Tripod X3568 v4
board to use the modern 'gpios' property to conform with current
devicetree binding standards.
Signed-off-by: Coia Prant <coiaprant@gmail.com>
Link: https://patch.msgid.link/20260701185657.4092955-2-coiaprant@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
wq_worker_tick() bumps pwq->stats[PWQ_STAT_CPU_TIME] on every scheduler
tick before pool->lock is taken. For unbound workqueues the
pool_workqueue is shared by all workers of the pool across CPUs, so
concurrent ticks on different CPUs perform an unsynchronized 64-bit
read-modify-write on the same counter. KCSAN reports this as a
data-race:
BUG: KCSAN: data-race in wq_worker_tick / wq_worker_tick
read-write to 0xffff0004d6989500 of 8 bytes by interrupt on cpu 29:
wq_worker_tick+0x70/0x418
sched_tick+0x248/0x3a0
update_process_times+0x200/0x260
tick_nohz_handler+0x230/0x2f8
__hrtimer_run_queues+0x1ec/0x6c8
hrtimer_interrupt+0x174/0x4b8
...
read-write to 0xffff0004d6989500 of 8 bytes by interrupt on cpu 24:
wq_worker_tick+0x70/0x418
sched_tick+0x248/0x3a0
...
value changed: 0x000000000010a1d0 -> 0x000000000010a9a0
The counter is purely advisory, so an occasional lost update is
harmless, and every other stats[] update already runs under pool->lock.
Annotate the update with data_race().
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
