| Age | Commit message (Collapse) | Author |
|---|
|
refill_skbs() tops up the per-netpoll skb pool with GFP_ATOMIC and
simply stops on the first allocation failure, leaving the pool partially
filled; a later refill tops it up once memory frees up. The allocation
failing is therefore an expected and fully handled condition, but
without __GFP_NOWARN the page allocator emits a warn_alloc() splat with
a full stack trace on every miss.
Pass __GFP_NOWARN so the best-effort refill stays quiet, mirroring the
same change in netconsole's find_skb().
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260629-netpoll_no_warn-v1-2-f380f0b2cd0c@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
find_skb() allocates the skb with GFP_ATOMIC as a best-effort attempt:
on failure it falls back to the preallocated skb pool and, failing that,
polls the device and retries. The allocation failing is therefore an
expected and fully handled condition, but without __GFP_NOWARN the page
allocator still emits a warn_alloc() splat with a full stack trace on
every miss, which then consumes the whole SKB pool, that would be useful
printing the real issue rather than the memory failure.
Pass __GFP_NOWARN so the best-effort allocation stays quiet and lets the
existing fallback path do its job.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260629-netpoll_no_warn-v1-1-f380f0b2cd0c@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a linear skb crosses a 16 KiB boundary, ioc3_start_xmit()
splits it into two buffers of lengths s1 and s2. The descriptor
advertises those lengths through B1CNT and B2CNT.
The first buffer is mapped with s1, but the second buffer is also
mapped with s1 even though the device is told to fetch s2 bytes from
it. When the lengths differ, the DMA mapping does not cover the same
region as the second descriptor buffer, which can result in incorrect
cache maintenance or a DMA fault on implementations that enforce the
mapped range.
There is a separate mismatch in the error path. If mapping the second
buffer fails, only d1 needs to be unmapped. d1 was mapped for s1 bytes,
but the driver unmaps it using the full packet length. Streaming DMA
mappings must be unmapped with the same size used for the corresponding
map operation.
Map the second buffer with s2 and unmap the first buffer with s1 when
the second mapping fails.
Cc: <stable+noautosel@kernel.org> # untested fix for ancient HW
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Reviewed-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Link: https://patch.msgid.link/4E1486BC4536407E+20260629080623.908426-1-raoxu@uniontech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ioc3eth_remove() frees the coherent RX and TX descriptor rings before
unregistering the netdev. If the interface is running,
unregister_netdev() invokes ioc3_close() through ndo_stop.
ioc3_close() stops the device and then calls ioc3_free_rx_bufs() and
ioc3_clean_tx_ring(). Both cleanup functions access descriptors in the
rings, so the current ordering causes CPU accesses to freed coherent
memory. Until ioc3_stop() disables RX and TX DMA, the device may also
continue using the freed ring addresses.
Unregister the netdev before releasing the rings. This lets the core
close a running interface and quiesce the device while the rings are
still valid. Keep the explicit timer deletion because ndo_stop is not
called when the interface is already down.
Cc: <stable+noautosel@kernel.org> # untested fix for ancient HW
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Reviewed-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Link: https://patch.msgid.link/40CD736C4911C181+20260629085053.964383-1-raoxu@uniontech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The JUnit XML output correctly captures the stderr/stdout output of failed
tests inside the <failure> element. However, for skipped tests, the output
was completely discarded and the XML only received a self-closing <skipped
message="reason"/> tag.
This expands the <skipped> element to include the test's err_output when
available, which is extremely helpful for debugging why a test was skipped
(e.g. diagnosing missing prerequisites or unexpected environment states
that triggered the skip) directly from CI systems parsing the XML report.
Assisted-by: Antigravity:gemini-3.1-pro
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Optimize the execution of the metric validation and metric listing shell
test suites:
1. `stat_metrics_values.sh`:
The Python metric validator runs the `perf bench futex hash` workload
for each validated metric relationship. Reduce the benchmark runtime
limit from `-r 2` (2 seconds) to `-r 1` (1 second). This cuts the
workload duration in half while still generating sufficient PMU events
to satisfy non-zero threshold metric validations.
2. `stat_all_metrics.sh`:
The metric checking test runs `perf stat` sequentially across all
433+ listed metrics. Change the default workload for system-wide runs
from `sleep 0.01` to `true`. This avoids the 10ms sleep delay on each
sequential metric invocation, saving over 4 seconds of total wall
time during full test suite runs.
Assisted-by: Antigravity:gemini-3.1-pro
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The lock contention analysis test suite (`lock_contention.sh`) performs a
series of 13 separate profiling checks to verify various aggregation and
filtering parameters of `perf lock contention`. Each of these checks runs
the `perf bench sched messaging` messaging benchmark as its workload.
By default, `sched messaging` runs 10 groups of 40 processes (400
processes total) generating substantial task scheduling, context
switching, and IPC message passing. When traced system-wide for lock
events, the tracing overhead (handling millions of lock acquisitions and
releases) slows execution down significantly, causing the test suite to
take over 80 seconds.
Optimize this by introducing a scaled-down messaging benchmark workload:
`perf bench sched messaging -g 1 -p`. Running 1 group (40 processes) takes
only 0.01 seconds natively (instead of 0.08 seconds), drastically reduces
the sheer volume of lock acquire/release trace events, and reduces CPU
context switching during tracing while still generating sufficient lock
events to fully exercise the BPF/record filters.
Assisted-by: Antigravity:gemini-3.1-pro
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The off-cpu profiling test suite runs multiple recording commands with a
default workload of `sleep 1` to test the off-cpu threshold configurations
(specifically, above 999ms and below 1200ms). This adds a mandatory 3.0
seconds of sleep overhead.
Optimize this by scaling down the thresholds and workload durations by a
factor of 10:
- Use `sleep 0.1` as the workload duration.
- Change the above-threshold test to use `--off-cpu-thresh 50` and `sleep
0.1`.
- Change the below-threshold test to use `--off-cpu-thresh 500` and `sleep
0.1`.
- Update the awk period check in the above-threshold test to look for a
period greater than 50,000,000 ns (50ms) instead of 999,000,000 ns
(999ms).
This reduces raw test sleep overhead from 3.0s down to 0.3s, yielding a
~2.7 second speedup for this test.
Assisted-by: Antigravity:gemini-3.1-pro
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The branch stack sampling test (test 130) runs short iteration-based
workloads to verify syscall, kernel, and trap branch stack sampling.
Specifically, `test_syscall()` and `test_kernel_branches()` run `perf
bench syscall basic` with loop counts of 8000 and 1000, and
`test_trap_eret_branches()` runs `traploop` with 1000 iterations.
Because these loop limits are extremely small, the total benchmark
runtimes last only a few milliseconds (or less). Under high load,
virtualization, or coarse sampling conditions, PMU cycle sampling fails to
capture enough samples inside the brief benchmark loops. This leads to
false negatives where the script output lacks the expected syscall,
kernel, or trap branch entries (e.g. "ERROR: Branches missing getppid[^
]*/SYSCALL/").
Fix this by increasing the workload loop counts to 100,000 across all
three test sections. Running 100,000 loops still finishes virtually
instantaneously (less than 0.1 seconds), but generates enough iterations
to guarantee robust branch stack capture.
Fixes: b55878c90ab9 ("perf test: Add test for branch stack sampling")
Assisted-by: Antigravity:gemini-3.1-pro
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The `perf stat --bpf-counters test` fails intermittently on hybrid
architectures or systems with dynamic frequency scaling (DVFS). This
happens because the test workload (`sqrtloop`) runs for a fixed 1-second
duration, and the CPU frequency can scale dynamically between idle and
maximum frequency. As the first run runs on a cold CPU and the second run
runs on a warmed-up CPU (or vice versa), the number of instructions
executed in 1 second differs by up to 2.2x, violating the comparison
tolerance.
Also, when running as root, BPF tracepoints and scheduling programs
trigger frequently. Since standard `perf stat -e instructions` measures
both user and kernel space instructions, it counts BPF helper and program
execution overheads, whereas the BPF counters themselves do not self-
measure. This introduces a large kernel-space instruction count
discrepancy between standard and BPF counters.
Fix these issues by:
1. Switching the workload to a strictly deterministic, iteration-based
workload: `awk 'BEGIN { for (i=0; i<10000000; i++) sum+=i }'`. We pin
the
workload to a single random allowed CPU using `taskset -c $CPU` via a
bash array.
2. Restricting the counted event to user-space only (`instructions:u` or
`/u`).
3. Tightening the comparison tolerance from 20% to 15%.
These modifications isolate the measurements to user-space instructions of
the deterministic loop, which executes a virtually identical number of
instructions on both runs (with less than 0.001% variation), eliminating
Dynamic Frequency Scaling (DVFS), kernel scheduling noise, and BPF helper
self-measurement overheads.
Fixes: 2c0cb9f56020 ("perf test: Add a shell test for 'perf stat --bpf-counters' new option")
Assisted-by: Antigravity:gemini-3.1-pro
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The `perf trace record and replay` test fails intermittently on slow or
virtualized hosts because the default recording workload (`sleep 1`)
occasionally completes without scheduling the target `nanosleep` or
`clock_nanosleep` system calls inside the recorded sample window,
resulting in the error: `Failed: cannot find *nanosleep syscall`.
Generalize the `perf_record_with_retry` helper in
`tests/shell/lib/perf_record.sh` to support a custom record command prefix
via the `PERF_RECORD_CMD` environment variable (defaulting to "perf
record").
Update `trace_record_replay.sh` to use this robust retry loop running with
`PERF_RECORD_CMD="perf trace record"` and a base workload of `sleep`. The
test will automatically retry with scaled sleep durations (from 0.01s up
to 2.0s) until the required `nanosleep` event is successfully captured.
Fixes: 15bcfb96d0dd ("perf test: Add trace record and replay test")
Assisted-by: Antigravity:gemini-3.1-pro
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The `python profiling with jitdump` test failed due to:
1. Target PID extraction resolving to duplicate space-separated values,
which broke the buildid-cache loops.
2. The default workload duration being too short to capture JIT stack
trampoline samples, resulting in 0 matching JIT symbols.
Fix the PID parsing by sorting and retrieving a unique single-line value.
Implement a robust retry loop starting at 1M python loop iterations and
scaling up to 100M iterations until JIT symbols are successfully captured
and verified.
Fixes: c9cd0c7e529e ("perf test: Add python JIT dump test")
Assisted-by: Antigravity:gemini-3.1-pro
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The metrics value validation test requires system-wide recording (`-a`),
which can fail on systems without root permissions or where paranoid
levels restrict tracing. Add a check to skip the test if `-a` is not
supported.
Also fix false negatives during validation by updating parse error string
patterns and resolving issues in metric list generation.
Fixes: 3ad7092f5145 ("perf test: Add metric value validation test")
Assisted-by: Antigravity:gemini-3.1-pro
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Introduce `perf_record_with_retry` and `perf_record_cleanup` in a shared
library `tests/shell/lib/perf_record.sh` to prevent record test failures
caused by transient recording or workload delays.
Update `record.sh`, `record_lbr.sh`, `pipe_test.sh`, `kvm.sh`, and
`stat_all_pfm.sh` to use this robust record retry logic. These tests now
start with very short durations (e.g. 0.01 seconds) and scale up if the
initial recording failed to capture samples, significantly improving test
execution speed on success while remaining resilient to slow systems.
Assisted-by: Antigravity:gemini-3.1-pro
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Currently, the noploop and thloop workloads only support sleep durations
in integer seconds because they parse the argument using atoi() and use
alarm() for timer signaling.
To support much shorter execution times in tests (speeding up test suites
and allowing faster retries), change the input parsing to use atof() for
double floating-point seconds. Use ualarm() for fractional durations less
than 1.0 seconds, and fall back to alarm() for durations of 1.0 second or
more.
Assisted-by: Antigravity:gemini-3.1-pro
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The parallel test harness uses the carriage return delete escape sequence
`PERF_COLOR_DELETE_LINE` ("\033[A\33[2K\r") to erase and update the
"Running (X active)" progress lines.
However, if a test description is longer than the terminal width, the line
wraps around. When this happens, the cursor up escape sequence `\033[A`
only moves the cursor to the last wrapped row, leaving the top half of the
description printed on the previous line. This leads to name duplication
and output corruption spilling over multiple rows on consoles narrower
than the maximum description length (e.g., 101 columns wide).
Fix this by dynamically querying the terminal width using
`get_term_dimensions` and truncating the printed test descriptions using
the `%-*.*s` printf format. We reserve 35 characters for prefix, status,
and spacing metrics to guarantee the progress line never wraps.
Fixes: 0e036dcad4e6 ("perf test: Display number of active running tests")
Assisted-by: Antigravity:gemini-3.1-pro
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Commit b1c5efbfd92e ("perf parse-events: Remove hard coded legacy hardware
and cache parsing") introduced a bypass to PMU filtering to prevent uncore
PMUs from being filtered out during event parsing, which was required for
resolving `duration_time` and `uncore_freq` when running with `--cputype`.
However, this bypass was active whenever `pmu_filter` was set, which also
incorrectly bypassed filtering for the `--pmu-filter` option.
Introduce a `cputype_filter` boolean flag in `parse_events_state` and
`parse_events_option_args` to distinguish filtering initiated by
`--cputype` from that initiated by `--pmu-filter`. Restrict the core-only
check in `parse_events__filter_pmu()` to when `cputype_filter` is true.
Fixes: b1c5efbfd92e ("perf parse-events: Remove hard coded legacy hardware and cache parsing")
Assisted-by: Antigravity:gemini-3.1-pro
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
To include IO-only and backtrace modes to test different code paths.
$ sudo perf test -vv timechart
135: perf timechart tests : Running
135: perf timechart tests:
---- start ----
test child forked, pid 2413665
perf timechart Basic test
perf timechart Basic test [Success]
perf timechart IO-only test
perf timechart IO-only test [Success]
perf timechart Backtrace test
perf timechart Backtrace test [Success]
---- end(0) ----
135: perf timechart tests : Ok
=== Test Summary ===
Passed main tests : 1
Passed subtests : 0
Skipped tests : 0
Failed tests : 0
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The second loop for per_pidcommd is meaningful only when it doesn't have
from and to tasks. Also make sure c->Y is set before copying the comm
string otherwise it will be overwritten by next one.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The command line options can be passed without copy as their lifetime is
limited within the same function.
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add timechart__release() to free all data structures added during the
sample processing.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The pattern of strdup() and free() is found, and I think it just can
use the original backtrace directly.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Now the backtrace argument is not used in any handler. Let's get rid of
it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The backtrace was used by sched-switch and sched-wakeup only. No need
to call cat_backtrace() in the process_sample_event(). Let's pass NULL
backtrace and generate it from the sched events.
As it needs a pointer to the 'machine', let's save the session in the
timechart struct and use the host machine of the session instead of
passing the pointer to all handlers. It should be fine to assume the
host machine as timechart command doesn't deal with guest machines and
there's no way to get tracepoints from the guest events.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The cat_backtrace() is only called from process_sample_event() which
means the event type is always PERF_RECORD_SAMPLE. We don't need to
pass the event just because to print already known info.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
When busy-poll is active, napi_schedule_prep() returns false in
virtqueue_napi_schedule(), so virtqueue_disable_cb() is skipped.
The device may keep firing irqs until reaches virtqueue_napi_complete().
Under load (received == budget), it will lead to a large number
of spurious interrupts.
Fix it by disabling the callback at the virtnet_poll() entry.
This keeps the callback off while we poll and it is re-enabled by
virtqueue_napi_complete() when going idle.
Fixes: ceef438d613f ("virtio_net: remove custom busy_poll")
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Longjun Tang <tanglongjun@kylinos.cn>
Link: https://patch.msgid.link/20260629024230.37325-1-lange_tang@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add READ_ONCE()/WRITE_ONCE() annotations on port->is_enabled.
While this field is written under bond->mode_lock protection,
is is read without this lock being held.
Change bond_fill_info() to acquire RCU and use READ_ONCE()
to read bond->params fields that can be updated concurrently
from sysfs/procfs/rtnetlink.
Add const qualifiers to bond_uses_primary(), __agg_active_ports(),
bond_option_active_slave_get_rcu(), bond_3ad_get_active_agg_info(),
__bond_3ad_get_active_agg_info() helpers.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jay Vosburgh <jv@jvosburgh.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260629173200.469953-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sctp_free_addr_wq() previously removed addr_wq_timer using timer_delete()
while holding addr_wq_lock. However, timer_delete() does not guarantee that
a currently running timer handler has completed.
This allows a race with sctp_addr_wq_timeout_handler(), where the handler
may still run after addr_waitq has been freed, acquire addr_wq_lock, and
access freed memory, leading to a use-after-free.
Fix this by calling timer_shutdown_sync() before taking addr_wq_lock. This
guarantees that any in-flight timer handler has finished and prevents the
timer from being re-armed during teardown, making subsequent cleanup safe.
Fixes: 4db67e808640 ("sctp: Make the address lists per network namespace")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/5dc95f295bdb5c3f60e880dd9aa5112dc5c071cc.1782757874.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The UMEM state refactor made __send_pkts() use xsk->umem for Tx
address generation. At the same time, the shared-UMEM Tx setup copies the
Rx UMEM state into a Tx-local state object and resets base_addr and
next_buffer before configuring the Tx socket.
Passing that Tx-local object to xsk_configure() makes xsk->umem point to
the zero-based Tx allocator state. This breaks the BIDIRECTIONAL test once
the roles are switched: the same socket is then used for Rx validation, but
received descriptors from the other logical UMEM half are checked against
base_addr == 0. With the new UMEM bounds check, a valid address such as
base_addr + XDP_PACKET_HEADROOM is rejected as being outside the UMEM
window.
Keep xsk->umem as the shared/Rx UMEM view used for socket configuration
and Rx validation. Use the ifobject-local UMEM copy only for Tx descriptor
address generation, preserving the BIDIRECTIONAL test's intent of using
the proper logical UMEM half after the direction switch.
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Tested-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://patch.msgid.link/20260629191221.2700-1-maciej.fijalkowski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The python metrics code used in places like ilist.py passes a
pmu-filter of "default_core" on non-hybrid x86/ARM/.. systems. As a
PMU like "cpu" isn't a literal name match then no PMU matches
"default_core" and the events fail to parse for the metric. Fix the
name matching and PMU lookup for "default_core" and check that it
fixes ilist.py.
Fixes: 74e2dbe7be50 ("perf tools: Add --pmu-filter option for filtering PMUs")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed‑by: Qinxin Xia <xiaqinxin@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
We always used 5 sec as the default command timeout. But soon after
it was introduced, David effectively made us ignore the timeout
(it was passed to process.communicate() as the wrong argument).
Gal recently fixed that, but turns out the 5 sec is not enough
for a lot of tests and setups. The fix caused regressions.
In particular running reconfig commands (e.g. XDP attach) on mlx5
with 32 rings and 9k MTU, on a heavily-debug-enabled kernel takes
more than 5 sec. The XDP installation command will time out after
5 sec but since the sleeps in the kernel are non interruptible
the command finishes anyway, leaving the XDP program attached,
but with non-zero exit code. defer()ed cleanups are not installed,
breaking the environment for subsequent tests.
Since "install XDP" is a pretty normal command a "point fix"
does not seem appropriate. 32 rings is a fairly reasonable
config, too, so we should just increase the timeout to 20 sec.
There's no real reason behind the value of 20.
Fixes: 1cf270424218 ("net: selftest: add test for netdev netlink queue-get API")
Fixes: f0bd19316663 ("selftests: net: fix timeout passed as positional argument to communicate()")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Acked-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20260629233348.2145841-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
linux/gpio.h should no longer be used, change these in drivers/net to
linux/gpio/consumer.h where possible, with b53 being the only one still
using linux/gpio/legacy.h.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260629132633.1300009-7-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since dynamic_events/kprobe_events files show the fetcharg debug
information as comment lines, its reader needs to ignore it.
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Fuzzers use coverage information to guide generation of test cases
towards new or interesting code paths. Syzkaller, specifically, makes
use kcoverage (CONFIG_KCOV). Coverage information is not collected for
kernel tasks unless annotated by kcov_remote_start and kcov_remote_stop.
This patch annotates io-uring's work queue and sqpoll tasks.
Depends-On: 20260430-kcov-refactor-common-handle-v1-1-23a0c7a0ba38@google.com
Signed-off-by: Robert Femmer <robert@fmmr.tech>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
xbc_snprint_cmdline() is meant to be called twice: first with
buf=NULL, size=0 to probe the rendered length, then with a real
buffer to fill it (the standard snprintf() two-pass pattern). The
probe call makes the function compute "buf + size" (NULL + 0) and,
on every iteration, advance "buf += ret" from that NULL base and
pass the result back into snprintf().
Pointer arithmetic on a NULL pointer is undefined behavior. It is
harmless in the in-kernel callers today, but the follow-up patches
run this same code in the userspace tools/bootconfig parser at kernel
build time, where host UBSan / FORTIFY_SOURCE abort the build.
Track a running written length (size_t) instead of mutating @buf, and
only form "buf + len" when @buf is non-NULL. snprintf(NULL, 0, ...)
is itself well defined and returns the would-be length, so the
two-pass "probe then fill" usage returns identical byte counts.
Link: https://lore.kernel.org/all/20260626-bootconfig_using_tools-v7-1-24ab72139c29@debian.org/
Fixes: 51887d03aca1 ("bootconfig: init: Allow admin to use bootconfig for kernel command line")
Cc: stable@vger.kernel.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
spi_device_id that replaces .driver_data by an anonymous union.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/cac7a68e6a6adb1b58207640ab045e59eec86f53.1781883685.git.u.kleine-koenig@baylibre.com
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com> says:
[Nothing]
Link: https://patch.msgid.link/cover.1782827697.git.u.kleine-koenig@baylibre.com
|
|
The two previous patches did some style improvements while adapting the
i2c_device_id arrays. Adapt all the remaining regulator drivers to use
the same style. That is:
- Use a comma after a initialisation value unless the closing } is in
the same line.
- Don't use a comma after the list terminator.
- Use a space after the opening { and one before the closing }; a
single space for an empty pair.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/221a2e634f6bbf9638b906470ffb1b2b413e0a5a.1782827697.git.u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
While touching all these arrays, unify usage of whitespace and commas.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/2e83a9747ac2c92db8f91fd0e0eb311c4efe8e73.1782827697.git.u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The two drivers explicitly set .driver_data to zero but don't use this
value. So drop the explicit assignment.
While touching these arrays, unify usage of whitespace and commas, and
use named initializers.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/ce4f4851f16d8eea9cca632017d8c64c39ab2bcb.1782827697.git.u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A PIO buffer is a region of device memory to which the driver can write a
packet for TX, with the device handling the transmit doorbell without
requiring a DMA for getting the packet data, which helps reducing latency
in certain exchanges. With CXL mem protocol this latency can be lowered
further.
With a device supporting CXL and successfully initialised, use the cxl
region to map the memory range and use this mapping for PIO buffers.
Signed-off-by: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20260630151346.31201-6-alejandro.lucero-palau@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Use core API for safely obtain the CXL range linked to an HDM committed
by the BIOS. Map such a range for being used as the ctpio buffer.
A potential user space action through sysfs unbinding or core cxl
modules remove will trigger sfc driver device detachment, with that case
not racing with this mapping as this is done during driver probe and
therefore protected with device lock against those user space actions.
Signed-off-by: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Dan Williams <djbw@kernel.org>
Link: https://patch.msgid.link/20260630151346.31201-5-alejandro.lucero-palau@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Use cxl_set_capacity() for DPA initialization as no mailbox is
available.
Signed-off-by: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ben Cheatham <benjamin.cheatham@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20260630151346.31201-4-alejandro.lucero-palau@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Use cxl core functions for discovering and mapping CXL device registers.
Signed-off-by: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ben Cheatham <benjamin.cheatham@amd.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20260630151346.31201-3-alejandro.lucero-palau@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Add CXL initialization based on new CXL API for accel drivers and make
it dependent on kernel CXL configuration.
Signed-off-by: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260630151346.31201-2-alejandro.lucero-palau@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Makefile
Link to the uuid library as part of libvfio.mk instead of as only linking
it via VFIO selftests' Makefile, as the whole point of providing libvfio.mk
is to allow linking the VFIO library functionality into KVM selftests,
without KVM selftests having to know the gory details or duplicate code.
Cc: Raghavendra Rao Ananta <rananta@google.com>
Cc: David Matlack <dmatlack@google.com>
Cc: Vipin Sharma <vipinsh@google.com>
Cc: Alex Williamson <alex@shazbot.org>
Fixes: e65f1bf8a2db ("vfio: selftests: Extend container/iommufd setup for passing vf_token")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20260630212805.474418-1-seanjc@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
The default memory profile configures rxdma_monitor_dst_ring_size as 8092,
which is a typo. The intended value is 8192, consistent with all other ring
sizes in the table being powers of two.
Correct the monitor destination ring size to 8192.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6-01243-QCAHKSWPL_SILICONZ-1
Fixes: defae535dd63 ("wifi: ath12k: Add a table of parameters entries impacting memory consumption")
Signed-off-by: Aaradhana Sahu <aaradhana.sahu@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260616062342.4079796-1-aaradhana.sahu@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
For WCN7850, MAC buffer ring size is updated to 2048 in
955df16f2a4c3 ("wifi: ath12k: change MAC buffer ring size to 2048")
to increase peak throughput.
But during the RX process, a phenomenon can still be observed where
the throughput drops by about 30% from its peak value and then recovers,
and this behavior repeats during RX.
After increasing MAC buffer ring size to 4096, the data rate drop has
gone.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Signed-off-by: Yingying Tang <yingying.tang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260610031358.2043716-1-yingying.tang@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Do not populate peer and link_id in ieee80211_rx_status for monitor
MSDUs.
The monitor RX path is handled differently in mac80211 when
RX_FLAG_ONLY_MONITOR is set, and does not consume peer/link metadata.
As such, looking up the peer and updating link_id here is unnecessary.
Additionally, this metadata is not required for monitor mode delivery,
and performing the lookup/update introduces redundant work and the
potential for inconsistent rx_status state if multiple paths modify it.
Hence, remove the peer lookup and link_id update from the monitor MSDU
delivery path.
This also removes the per-MSDU debug logging in the monitor path,
slightly reducing debuggability, but avoids unnecessary overhead in the
monitor RX path.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6-01243-QCAHKSWPL_SILICONZ-1
Signed-off-by: Sushant Butta <sushant.butta@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260609064856.547032-3-sushant.butta@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
monitor mode
Monitor mode delivers raw 802.11 frames, not 802.3/Ethernet frames. Setting
RX_FLAG_8023 for monitor RX is incorrect and can break userspace capture and
analysis. Do not update this flag in the monitor path to ensure correct
handling of captured frames.
In the monitor path, RX_FLAG_ONLY_MONITOR is always set before decap
is evaluated, which forces decap to remain DP_RX_DECAP_TYPE_RAW.
As a result, the condition to set RX_FLAG_8023 can never be satisfied.
Hence, drop this unreachable code.
Also remove the unused hal_rx_mon_ppdu_info parameter from
ath12k_dp_mon_rx_deliver_msdu(), as it was passed but never used.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6-01243-QCAHKSWPL_SILICONZ-1
Signed-off-by: Sushant Butta <sushant.butta@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260609064856.547032-2-sushant.butta@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
