| Age | Commit message (Collapse) | Author |
|---|
|
Currently defined VF/PF relay actions use regular REQUEST messages
only and the PF shouldn't attempt to handle FAST_REQUEST nor EVENT
messages as this would result in breaking the VFPF ABI protocol
and also might trigger an assert on the PF side.
Fixes: 98e62805921c ("drm/xe/pf: Add SR-IOV GuC Relay PF services")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patch.msgid.link/20260527183735.22616-1-michal.wajdeczko@intel.com
|
|
During very early development of the Xe driver the force_execlist module
parameter could be used to exercise some parts of the driver in a
GuC-less manner. This was primarily intended to ensure that the driver
was being designed and developed with proper modularity and layering;
use of the GuC firmware has always been considered mandatory for any
real Xe driver operation. The "execlist" implementation in the driver
was never completed, and has further bitrotted over time to the point
where it hangs during execution of even the simplest IGT tests like
xe_exec_store now.
Drop the force_execlist parameter; it's broken and isn't going to get
fixed. In the (very unlikely) event that we decide to bring something
like this back in the future, it would need to be as a per-device
configfs setting rather than a driver-wide module parameter.
The "execlist" implementation is now dead code, so it will probably also
be removed sometime in the near future. There's a bit more general
refactoring we might want to do first before we take that step, so for
now we're just removing the module parameter.
Reviewed-by: Maarten Lankhorst <dev@lankhorst.se>
Link: https://patch.msgid.link/20260626-remove_execlists-v1-1-2584d8c4a6f2@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
Xe must only add registers to the GT whitelist if they are listed in the
"Software Allowlist" section of the bspec. These registers have been
carefully reviewed by the architecture/security teams to ensure that
they are safe to whitelist from a security perspective. The list of
allowed registers changes from platform to platform, and it is not safe
to assume that a register is safe to whitelist on a new platform/IP just
because it was whitelisted on older ones. This means that whitelist
entries in the driver that used undefined upper bounds
(XE_RTP_END_VERSION_UNDEFINED) for their version ranges should always be
considered illegal since they could potentially open unexpected security
holes on future platforms. Add a kunit test to scan the whitelist RTP
table and ensure that all entries have well-defined upper bounds on IP
version ranges.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20260626-kunit_whitelist_bounds-v3-1-aedf0b3adab9@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
This commit fixes the NULL pointer dereference issue that would have
happened on the split of GPU mapping due to partial unmap of an evicted
BO. There is a logic to handle the partial unmap of huge pages when the
GPU mapping is split. That logic was not being completely skipped for
the VMA of an evicted BO and that resulted in a NPD possibility for the
'bo->backing.pages' pointer, which is set to NULL when pages of a
BO are released on eviction.
Following dump was seen when a partial unmap was exercised for an
evicted BO.
Unable to handle kernel paging request at virtual address 0000000000002000
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=00000008842e8000
[0000000000002000] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] SMP
<snip>
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : iova_mapped_as_huge_page+0x20/0x68 [panthor]
lr : panthor_gpuva_sm_step_remap+0x39c/0x498 [panthor]
sp : ffff800086193920
x29: ffff800086193920 x28: ffff800086193a18 x27: ffff800086193b80
x26: 0000000000400000 x25: 0000000000810000 x24: 0000000000400000
x23: ffff000808af1800 x22: 0000000000a00000 x21: ffff800086193a00
x20: ffff000806fd3f00 x19: 0000000000410000 x18: 00000000ffffffff
x17: 0000000000000000 x16: 0000000000000000 x15: ffff800083ce2d83
x14: 0000000000000000 x13: 3120646574636976 x12: 6520303030303138
x11: 2d30303030313420 x10: ffff8000836e6c80 x9 : ffff80007bfc889c
x8 : 3fffffffffffefff x7 : ffff8000836e6c80 x6 : 0000000000000000
x5 : ffff00097ef19088 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000000000010000 x1 : 0000000000000400 x0 : 0000000000000000
Call trace:
iova_mapped_as_huge_page+0x20/0x68 [panthor] (P)
op_remap_cb.isra.0+0x70/0xb0
__drm_gpuvm_sm_unmap+0xf8/0x1c0
drm_gpuvm_sm_unmap+0x40/0x60
panthor_vm_exec_op+0xa0/0x168 [panthor]
panthor_vm_bind_exec_sync_op+0x8c/0xb8 [panthor]
panthor_ioctl_vm_bind+0xbc/0x170 [panthor]
drm_ioctl_kernel+0xc0/0x140
drm_ioctl+0x20c/0x500
__arm64_sys_ioctl+0xb4/0x118
invoke_syscall+0x5c/0x120
el0_svc_common.constprop.0+0x48/0xf8
do_el0_svc+0x28/0x40
el0_svc+0x38/0x128
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x198/0x1a0
Code: 8b030021 cb020021 f940b800 d34cfc21 (f8617801)
---[ end trace 0000000000000000 ]---
v2: Fix indentation
Fixes: 8e7460eac786 ("drm/panthor: Support partial unmaps of huge pages")
Signed-off-by: Akash Goel <akash.goel@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260623130119.2737003-1-akash.goel@arm.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
Since $comm or $COMM are not event field but special fetcharg
variables to access current->comm, It should not be accessed
without '$' prefix even with typecast.
Link: https://lore.kernel.org/all/178231209724.732967.12049805699091810641.stgit@devnote2/
Fixes: 69efd863a785 ("tracing/eprobes: Allow use of BTF names to dereference pointers")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
fprobe_fgraph_entry() sizes a shadow-stack reservation in one walk of
the per-ip fprobe list and fills it in a second walk, both under
rcu_read_lock() only. A fprobe registered on an already-live ip can
become visible between the two walks, so the fill walk processes an
exit_handler the sizing walk did not count and used runs past
reserved_words. If the sizing walk counted nothing, fgraph_data is NULL
and the first write_fprobe_header() faults:
Oops: general protection fault, probably for non-canonical address ...
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:fprobe_fgraph_entry+0xa38/0xf10 kernel/trace/fprobe.c:167
Call Trace:
<TASK>
function_graph_enter_regs+0x44c/0xa10 kernel/trace/fgraph.c:677
ftrace_graph_func+0xc5/0x140 arch/x86/kernel/ftrace.c:671
__kernel_text_address+0x9/0x40 kernel/extable.c:78
arch_stack_walk+0x117/0x170 arch/x86/kernel/stacktrace.c:26
kmem_cache_free+0x188/0x580 mm/slub.c:6378
tcp_data_queue+0x18d/0x6550 net/ipv4/tcp_input.c:5590
[...]
</TASK>
The list cannot be frozen across the two walks, so skip a node that does
not fit the reservation and count it as missed.
Link: https://lore.kernel.org/all/20260619184425.3824774-1-rhkrqnwk98@gmail.com/
Fixes: 4346ba160409 ("fprobe: Rewrite fprobe on function-graph tracer")
Signed-off-by: Sechang Lim <rhkrqnwk98@gmail.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Since commit 533059281ee5 ("tracing: probeevent: Introduce new argument
fetching code") wrongly use @offset local variable during the parsing,
the offset value is added twice when dereferencing.
Reset the @offset after setting it in FETCH_OP_FOFFS.
Link: https://lore.kernel.org/all/178217905962.643090.1978577464942171332.stgit@devnote2/
Fixes: 533059281ee5 ("tracing: probeevent: Introduce new argument fetching code")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
|
|
For a char * element in an event, the FILTER_PTR_STRING filter type is
used. When the event occurs, a pointer is stored in the ringbuffer.
If an eprobe references such a char * element of a "base event", the
stored pointer is truncated when it's read from the ringbuffer.
$ cd /sys/kernel/tracing
$ echo 'e rcu.rcu_utilization $s:x64 $s:string' > dynamic_events
$ echo 1 > tracing_on
$ echo 1 > events/eprobes/enable
$ sleep 1
$ echo 0 > events/eprobes/enable
$ cat trace
<idle>-0 ...: (rcu.rcu_utilization) arg1=0x4f arg2=(fault)
<idle>-0 ...: (rcu.rcu_utilization) arg1=0x2 arg2=(fault)
The problem is in get_event_field
val = (unsigned long)(*(char *)addr);
addr points to the position in the ringbuffer where the pointer was
stored. The assignment reads only the lowest byte of the pointer.
Fix the cast to read the whole pointer. The output of the test above
is now
<idle>-0 ... arg1=0xffffffff81c7d3f3 arg2="Start scheduler-tick"
<idle>-0 ... arg1=0xffffffff81c57340 arg2="End scheduler-tick"
Link: https://lore.kernel.org/all/20260620145339.3234726-1-martin@kaiser.cx/
Fixes: f04dec93466a ("tracing/eprobes: Fix reading of string fields")
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Sashiko pointed that this sample code does not correctly handle the
failure of thread creation because kthread_run() can return -errno.
Check the simple_tsk_fn is correctly initialized (created) or not.
Link: https://lore.kernel.org/all/178165817322.269421.3992299509400184196.stgit@devnote2/
Link: https://sashiko.dev/#/patchset/178092865666.163648.10457567771536160909.stgit%40devnote2
Fixes: 9cfe06f8cd5c ("tracing/events: add trace-events-sample")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Sashiko found that user can cause this WARN_ON_ONCE() easily
with adding a kprobe event based on a raw address with BTF
parameter.
Since this is not an unexpected condition, remove the
WARN_ON_ONCE().
Link: https://lore.kernel.org/all/178177265367.2059927.13789953014706792126.stgit@mhiramat.tok.corp.google.com/
Link: https://sashiko.dev/#/patchset/178165816303.269421.7302603996990753309.stgit%40devnote2
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: b576e09701c7 ("tracing/probes: Support function parameters if BTF is available")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
GPIO interrupts that are wakeup capable need to be forwarded to wakeup
capable parent irqchip. This is done via writing to it's wakeup_enable bit.
Currently the bit is set only for PDC irqchip by checking skip_wake_irqs.
skip_wake_irqs is set to differentiate between parent irqchips MPM and
PDC. It is set when the parent irqchip is PDC to inform pinctrl about
skipping the IRQ setting up at TLMM.
However, the functionality to forward GPIO interrupts during SoC low
power mode is needed regardless of which parent irqchip it is.
Without the functionality it is impossible for MPM irqchip to detect the
GPIO interrupt during SoC low power mode since for MPM irqchip the
skip_wake_irqs is always false.
Remove skip_wake_irqs condition when setting wakeup enable bit to allow
forwarding GPIO interrupts for SoCs using MPM irqchip too.
Fixes: 76b446f5b86e ("pinctrl: qcom: handle intr_target_reg wakeup_present/enable bits")
Signed-off-by: Sneh Mankad <sneh.mankad@oss.qualcomm.com>
Reviewed-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260616-enable_wakeup_capable_gpios-v3-1-fb59647d89cb@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Function 'mediatek_gpio_bank_probe()' registers three GPIO chips using
'devm_gpiochip_add_data()'. At this point, the chips become live and visible
to consumers. However, the IRQ domain isn't allocated and set up until
'mt7621_gpio_irq_setup()' is called after the GPIO chips setup finishes.
If a consumer requests a GPIO IRQ concurrently 'mt7621_gpio_to_irq()' can
be called and pass a NULL irq domain pointer irq_create_mapping(), that can
corrupt the mappings or cause a crash. Fix this possible problem seting up
irq domain before GPIO chips setup is performed.
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: a46f2e5720f5 ("gpio: mt7621: fix interrupt banks mapping on gpio chips")
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://patch.msgid.link/20260626060112.2498324-4-sergio.paracuellos@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
The driver uses devm_gpiochip_add_data() to register the GPIO chips which
means the devres subsystem will unregister them only after the function
'mt7621_gpio_remove()' returns. During the window between domain destruction
and devres unregistering the GPIO chips, the chips are still fully active.
If a consumer or userspace invokes gpiod_to_irq() during this window,
'mt7621_gpio_to_irq()' can dereference the already-freed irq domain pointer.
Thus, manage the IRQ domain teardown using 'devm_add_action_or_reset()' to
guarantee it is destroyed strictly after the GPIO chips are removed.
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: a46f2e5720f5 ("gpio: mt7621: fix interrupt banks mapping on gpio chips")
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://patch.msgid.link/20260626060112.2498324-3-sergio.paracuellos@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
The bank-shared fields like 'rising' and 'falling' are modified using
non-atomic read-modify-write operations. Since every gpio chip instance
represents an entire bank of 32 pins, if 'mediatek_gpio_irq_type()' is
called concurrently for different IRQs on the same bank a possible overwrite
of each other's configuration is possible. Thus, protect this state with
'gpio_generic_lock_irqsave' lock in the same way it is handled in irp_chip
'mediatek_gpio_irq_mask()' and 'mediatek_gpio_irq_unmask()' callbacks.
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: 4ba9c3afda41 ("gpio: mt7621: Add a driver for MT7621")
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://patch.msgid.link/20260626060112.2498324-2-sergio.paracuellos@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Convert the Xen ARM device tree binding documentation from the legacy
plain-text format (Documentation/devicetree/bindings/arm/xen.txt) to
the DT schema format, as required by the modern DT binding process.
The "hypervisor" node is named without a unit-address. The name is part
of the Xen ABI and is matched verbatim by the kernel using strcmp() in
arch/arm/xen/enlighten.c and arch/arm64/kernel/acpi.c. Allow a
unit-address so this can be addressed and the dtc warnings can be
avoided in the example.
Signed-off-by: Tejas Mutalikdesai <tejasmutalikdesai@gmail.com>
Link: https://patch.msgid.link/20260618151147.9438-1-tejasmutalikdesai@gmail.com
[robh: Allow a unit-address]
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
msm_gpio_update_dual_edge_pos()
The "struct irq_data *d" argument to msm_gpio_update_dual_edge_pos() is
unused, drop it.
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Acked-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://patch.msgid.link/20260623122732.6439-2-johannes.goede@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Drop an unnecessary bitmap_fill() call from msm_gpio_irq_init_valid_mask(),
this is unnecessary because gpiochip_allocate_mask() already does this.
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Acked-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://patch.msgid.link/20260623122732.6439-1-johannes.goede@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
When CONFIG_BPF_LSM=y is set, BPF inode storage maps
(BPF_MAP_TYPE_INODE_STORAGE) are compiled into the kernel. However,
if the BPF LSM is not explicitly enabled at boot time (e.g. omitted
from the "lsm=" boot parameter), lsm_prepare() is never executed for
the BPF LSM.
Consequently, the BPF inode security blob offset
(bpf_lsm_blob_sizes.lbs_inode) is never initialized and remains at
its default compiled size of 8 bytes instead of being updated to a
valid offset past the reserved struct rcu_head (typically 16 bytes
or more).
When a privileged user creates and updates a BPF_MAP_TYPE_INODE_STORAGE
map, bpf_inode() evaluates inode->i_security + 8. This erroneously
aliases the struct rcu_head.func callback pointer at the beginning
of the inode->i_security blob. During subsequent map element cleanup
or inode destruction, writing NULL to owner_storage clears the queued
RCU callback pointer. When rcu_do_batch() later executes the queued
callback, it attempts an instruction fetch at address 0x0, triggering
an immediate kernel panic.
Fix this by introducing a global bpf_lsm_initialized boolean flag
marked with __ro_after_init. Set this flag to true inside bpf_lsm_init()
when the LSM framework successfully registers the BPF LSM. Gate map
allocation in inode_storage_map_alloc() on this flag, returning
-EOPNOTSUPP if the BPF LSM is in turn uninitialized.
This fail-fast approach prevents userspace from allocating inode
storage maps when the supporting BPF LSM infrastructure is absent,
avoiding zombie map states.
Fixes: 8ea636848aca ("bpf: Implement bpf_local_storage for inodes")
Reported-by: oxsignal <awo@kakao.com>
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/bpf/20260628201103.3624525-1-mattbobrowski@google.com
|
|
The autogenerated panthor_request_xx_irq() helpers unmask Mali
interrupts before we're sure we'll have a handler registered. For
non-shared IRQ lines, that's fine, but for shared ones, it might cause
an interrupt flood if the HW block raises an interrupt for any reason.
We could reworking the calls in panthor_request_xx_irq(), but it's just
simpler to let the caller decide when they are ready to handle interrupts
and call panthor_pwr_irq_resume() themselves. While at it, rework the
prototype to let users call panthor_pwr_irq_enable_events() explicitly
instead of passing an initial mask to panthor_request_pwr_irq().
Fixes: 5fe909cae118 ("drm/panthor: Add the device logical block")
Reported-by: Shashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260623-panthor-signal-from-irq-v3-0-2ece396f8ee0@collabora.com?part=3
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Karunika Choo <karunika.choo@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260625-panthor-misc-fixes-v1-11-b67ed973fea6@collabora.com
|
|
group_bind_locked() can fail if the MMU block is stuck. This is normally
a reset situation, but by the time we reset the GPU, we might have
tried to resume a group that's not resident, which will probably trip
out the FW. So let's avoid that by bailing out when group_bind_locked()
returns an error. We don't even try to start more groups because the
GPU will be reset anyway.
Fixes: de8548813824 ("drm/panthor: Add the scheduler logical block")
Reported-by: sashiko-bot@kernel.org
Closes: https://sashiko.dev/#/patchset/20260623-panthor-signal-from-irq-v3-0-2ece396f8ee0@collabora.com?part=7
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260625-panthor-misc-fixes-v1-10-b67ed973fea6@collabora.com
|
|
A group ref is tied to the pending tiler_oom_work, so we need to release
it if the cancel was effective.
Fixes: de8548813824 ("drm/panthor: Add the scheduler logical block")
Reported-by: sashiko-bot@kernel.org
Closes: https://sashiko.dev/#/patchset/20260623-panthor-signal-from-irq-v3-0-2ece396f8ee0@collabora.com?part=7
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260625-panthor-misc-fixes-v1-9-b67ed973fea6@collabora.com
|
|
panthor_fw_unplug() is only called if we at least managed to initialize
the IRQ, so it's safe to drop the "is IRQ initialized" check.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260625-panthor-misc-fixes-v1-8-b67ed973fea6@collabora.com
|
|
We can't call panthor_pwr_irq_suspend() if the device is suspended,
or this leads to a hang when the IOMEM region is accessed while the
clks are disabled. Do what other sub-components do and conditionally
call panthor_pwr_irq_suspend() if we know the PWR regbank block is
accessible.
Fixes: c27787f2b77f ("drm/panthor: Introduce panthor_pwr API and power control framework")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260625-panthor-misc-fixes-v1-7-b67ed973fea6@collabora.com
|
|
We schedule immediate ticks when we need to process events on CSGs,
but those immediate ticks don't change the resched_target because we
want the other groups to stay scheduled for the remaining of the GPU
timeslot they were given. Make sure these immediate ticks don't get
overruled by a sched_queue_delayed_work() that would delay the tick
execution.
Fixes: 99820b4b7e50 ("drm/panthor: Make sure we resume the tick when new jobs are submitted")
Reported-by: sashiko-bot@kernel.org
Closes: https://sashiko.dev/#/patchset/20260625-panthor-signal-from-irq-v4-0-3d2908912afa@collabora.com?part=9
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Karunika Choo <karunika.choo@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260625-panthor-misc-fixes-v1-6-b67ed973fea6@collabora.com
|
|
In theory, our hardirq handler can be called while the device (and
thus the panthor_irq) is suspended, because the IRQ line is shared.
In practice though, in all the designs we've seen, the line is only
shared within the GPU, and because sub-component suspend state is
consistent (all-suspended or all-resumed), we shouldn't end up with
an interrupt triggered while we're suspended.
Fix the problem anyway, if nothing else, for our sanity.
Fixes: 0b2d86670a84 ("drm/panthor: Rework panthor_irq::suspended into panthor_irq::state")
Reported-by: sashiko-bot@kernel.org
Closes: https://sashiko.dev/#/patchset/20260625-panthor-signal-from-irq-v4-0-3d2908912afa@collabora.com?part=1
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260625-panthor-misc-fixes-v1-5-b67ed973fea6@collabora.com
|
|
If heaps is an ERR_PTR(), panthor_heap_pool_put() will deref an invalid
pointer. Make sure we set it to NULL in that case.
Fixes: de8548813824 ("drm/panthor: Add the scheduler logical block")
Reported-by: sashiko-bot@kernel.org
Closes: https://sashiko.dev/#/patchset/20260625-panthor-signal-from-irq-v5-0-8836a74e0ef9@collabora.com?part=2
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260625-panthor-misc-fixes-v1-4-b67ed973fea6@collabora.com
|
|
The reset work will sub-component reset helpers, which might not be
ready if the reset happens during initialization, leading to NULL
pointer dereferences or worse.
Avoid that by keeping the reset work disabled while we're initializing
those sub-components.
Fixes: 5fe909cae118 ("drm/panthor: Add the device logical block")
Reported-by: sashiko-bot@kernel.org
Closes: https://sashiko.dev/#/patchset/20260625-panthor-signal-from-irq-v5-0-8836a74e0ef9@collabora.com?part=4
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260625-panthor-misc-fixes-v1-2-b67ed973fea6@collabora.com
|
|
Since dma_fence objects can be shared with other subsystems, they may be
accessed from hardirq context in those drivers, and we have to take
that into account by also using the IRQ-safe variant when acquiring
the lock.
While at it, switch to the guard model.
Fixes: de8548813824 ("drm/panthor: Add the scheduler logical block")
Reported-by: sashiko-bot@kernel.org
Closes: https://sashiko.dev/#/patchset/20260625-panthor-signal-from-irq-v5-0-8836a74e0ef9@collabora.com?part=11
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260625-panthor-misc-fixes-v1-1-b67ed973fea6@collabora.com
|
|
komeda_dev_resume() calls clk_prepare_enable() without checking the
return value. If the clock fails to enable, the function returns 0
(success) while IRQs are enabled and IOMMU is connected on potentially
unclocked hardware, causing undefined behavior on resume.
Propagate the error from clk_prepare_enable() and fix all call sites
in komeda_drv.c that previously ignored the return value of
komeda_dev_resume():
- komeda_platform_probe(): if resume fails, jump to err_destroy_mdev
(skipping the suspend call, since the clock was never enabled)
- komeda_pm_resume(): propagate the error and skip
drm_mode_config_helper_resume() on failure
This issue was found by code review without access to Komeda hardware.
Signed-off-by: Gustavo Kenji Mendonça Kaneko <kaneko.dev@pm.me>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260609130828.1066038-1-kaneko.dev@pm.me
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
malidp_runtime_pm_resume() calls clk_prepare_enable() three times
without checking the return value. If any clock fails to enable, the
driver silently proceeds with unclocked hardware, leading to undefined
behavior.
Convert both the resume and suspend paths to use the clk_bulk API:
clk_bulk_prepare_enable() in resume checks the return value and rolls
back any successfully enabled clocks on failure;
clk_bulk_disable_unprepare() in suspend keeps the two paths symmetric.
This issue was found by code review without access to Mali DP hardware.
Signed-off-by: Gustavo Kenji Mendonça Kaneko <kaneko.dev@pm.me>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260609130812.1065699-1-kaneko.dev@pm.me
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
Add support for the RZ/V2H(P) SoC PCIe controllers to the rzg3s-host
driver.
The RZ/V2H(P) SoC features two independent PCIe controllers that share
four physical lanes. The hardware supports two configuration modes:
single x4 mode where the first controller uses all four lanes, or dual
x2 mode where both controllers use two lanes each.
Introduce a setup_lanes() function pointer to configure the PCIe lanes
based on the hardware instance. Implement rzv2h_pcie_setup_lanes() to
detect the configuration at boot time and program the lane mode via the
system controller.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20260629220932.861445-5-prabhakar.mahadev-lad.rj@bp.renesas.com
|
|
Prepare the driver to handle multiple PCIe controllers with distinct
System Controller (SYSC) register sets, as required by RZ/V2H(P). The
current design stores a single sysc_info structure per SoC, which is
insufficient for multi-controller configurations.
Introduce controller identifiers and extend struct rzg3s_pcie_soc_data
to hold a sysc_info array indexed per PCIe controller. Add a
controller_id field to struct rzg3s_pcie_host and select the appropriate
System Controller information during probe based on the hardware
instance.
Keep existing single-controller SoCs functionally unchanged while
preparing the driver for RZ/V2H(P) multi-controller support.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20260629220932.861445-4-prabhakar.mahadev-lad.rj@bp.renesas.com
|
|
Switch to shared reset controls for PCIe power resets to prepare for
RZ/V2H(P) support. On this platform, multiple PCIe controllers share
the same reset line, requiring shared ownership of the reset control.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20260629220932.861445-3-prabhakar.mahadev-lad.rj@bp.renesas.com
|
|
Add support for the PCIe controller found on the Renesas RZ/V2H(P) SoC.
The RZ/V2H(P) controller is similar to the RZ/G3E variant but includes
additional registers and configuration bits for PCIe lane control. It
supports multilink operation configured as either a single x4 link
or two independent x2 link controllers.
Unlike earlier SoCs supported by this driver which only feature a single
PCIe controller, the RZ/V2H(P) SoC implements two controllers. Both
instances rely on the system controller (SYSC) for configuration, but
the required registers reside at different offsets for each controller.
To correctly identify the controller instance and map the corresponding
system controller registers, update the "renesas,sysc" property to a
phandle-array. For the RZ/V2H(P) SoC, require an accompanying cell to
specify the controller instance index (0 or 1). For all earlier SoCs,
strictly restrict the property to a single phandle with zero argument
cells.
Additionally, make the "num-lanes" property mandatory for this SoC and
restrict its values according to the hardware capabilities.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20260629220932.861445-2-prabhakar.mahadev-lad.rj@bp.renesas.com
|
|
ntfs_file_fsync(), ntfs_dir_fsync() and __ntfs_write_inode() lock an
inode's mrec_lock before taking the mrec_lock of its parent directory.
ntfs_rename() takes old_ni->mrec_lock and old_dir_ni->mrec_lock
before taking new_ni->mrec_lock for an existing target, or
new_dir_ni->mrec_lock for a cross-directory rename.
This can deadlock when ntfs_file_fsync() or __ntfs_write_inode() holds
the target inode, or when ntfs_dir_fsync() holds a child target
directory, while rename() holds the parent directory and waits for the
target.
Fix this by locking the existing target inode before taking any parent
directory mrec_lock. For cross-directory renames where the target parent
is a descendant of the source parent, lock the target parent before the
source parent so the directory order matches the child-to-parent order used
by ntfs_file_fsync(), ntfs_dir_fsync(), and __ntfs_write_inode().
Reported-by: Peiyang He <peiyang_he@smail.nju.edu.cn>
Closes: https://lore.kernel.org/all/C4D296F0E9F3D66C+9397ffbc-eb55-44bb-9b3f-5da4809e7955@smail.nju.edu.cn/
Fixes: af0db57d4293 ("ntfs: update inode operations")
Cc: stable@vger.kernel.org
Signed-off-by: Peiyang He <peiyang_he@smail.nju.edu.cn>
Assisted-by: Codex:gpt-5.5
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
ntfs_attr_fallocate() allocates holes and delayed allocations inside
initialized size by looking up the current runlist element under
ni->runlist.lock. The returned struct runlist_element is only a borrowed
pointer into ni->runlist.rl. A writer can replace and free that array
after the read lock is dropped, so later reads of rl->lcn, rl->length and
rl->vcn can touch freed memory.
The buggy scenario involves two paths, with each column showing the order
within that path:
ntfs_attr_fallocate():
1. Take ni->runlist.lock for read.
2. Get rl from ntfs_attr_find_vcn_nolock().
3. Drop ni->runlist.lock.
4. Read rl->lcn, rl->length and rl->vcn.
mmap page_mkwrite:
1. Enter ntfs_filemap_page_mkwrite().
2. Reach __ntfs_write_iomap_begin() and ntfs_attr_map_cluster().
3. Merge allocation state with ntfs_runlists_merge().
4. Reallocate ni->runlist.rl in ntfs_rl_realloc(), freeing the old array.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in ntfs_attr_fallocate+0xbb8/0xd00
Call Trace:
<TASK>
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
? ntfs_attr_fallocate+0xbb8/0xd00
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x20d/0x410
? ntfs_attr_fallocate+0xbb8/0xd00
kasan_report+0xe0/0x110
? ntfs_attr_fallocate+0xbb8/0xd00
ntfs_attr_fallocate+0xbb8/0xd00
? lock_acquire+0x2b8/0x2f0
? __pfx_ntfs_attr_fallocate+0x10/0x10
? 0xffffffffc0000095
? down_write+0x10d/0x1e0
ntfs_fallocate+0x5c9/0x1d00
? __pfx_ntfs_fallocate+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? lock_acquire+0x2b8/0x2f0
? srso_alias_return_thunk+0x5/0xfbef5
? selinux_file_permission+0x3a7/0x510
vfs_fallocate+0x29d/0xd30
__x64_sys_fallocate+0xc7/0x150
? do_syscall_64+0x81/0x6a0
do_syscall_64+0x115/0x6a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Allocated by task 410:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
__kvmalloc_node_noprof+0x353/0x920
ntfs_rl_realloc+0x3f/0x110
ntfs_runlists_merge+0xaa3/0x3010
ntfs_attr_map_cluster+0x4e5/0xf80
ntfs_attr_fallocate+0x53f/0xd00
ntfs_fallocate+0x5c9/0x1d00
vfs_fallocate+0x29d/0xd30
__x64_sys_fallocate+0xc7/0x150
do_syscall_64+0x115/0x6a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 424:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x5f/0x80
kfree+0x307/0x580
ntfs_rl_realloc+0x6f/0x110
ntfs_runlists_merge+0x7b1/0x3010
ntfs_attr_map_cluster+0x4e5/0xf80
__ntfs_write_iomap_begin+0x8cd/0x2280
iomap_iter+0x6de/0x11e0
iomap_page_mkwrite+0x391/0x650
ntfs_filemap_page_mkwrite+0x1ac/0x400
do_page_mkwrite+0x15c/0x280
__handle_mm_fault+0xd6d/0x1ca0
handle_mm_fault+0x19c/0x470
do_user_addr_fault+0x23b/0x9c0
exc_page_fault+0x5c/0xc0
asm_exc_page_fault+0x26/0x30
Fix this by copying the needed runlist fields while the read lock is still
held and using only those scalar snapshots after unlocking.
After the snapshot, ntfs_attr_map_cluster() can also find that the range
is already mapped and return balloc=false. Only call ntfs_dio_zero_range()
when new clusters were allocated, matching the write iomap path and
preserving the zero-newly-allocated-holes behavior.
Fixes: 495e90fa3348 ("ntfs: update attrib operations")
Assisted-by: Codex:gpt-5.5
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
Three sites enumerate every scx_event_stats field by name:
scx_read_events(), scx_attr_events_show(), and scx_dump_state().
Adding a new SCX_EV_* event requires three separate manual edits.
Missing any one silently drops counts or omits the field from
diagnostic output with no compile-time indication.
SCX_EVENTS_LIST(SCX_EVENT) in internal.h becomes the single
authoritative list of event names, so all three sites stay in sync.
No functional changes.
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Add PMG1110 GPIO support with its compatible string and match data.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Acked-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260610-pmg1110-gpio-v1-2-a9c50cd8b5d9@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Update the binding documentation to include the compatible string for
PMG1110 PMIC which is used on Maili platform.
Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260610-pmg1110-gpio-v1-1-a9c50cd8b5d9@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
__COMPAT_read_enum() and __COMPAT_struct_has_field() open-code the
vlen lookup via the raw BTF_INFO_VLEN(t->info) UAPI macro. libbpf
exposes btf_vlen() for exactly this purpose; use it in the three
call sites, matching the pattern in kernel/bpf/inode.c and
tools/bpf/bpftool.
btf_vlen() returns __u32 (since commit cacd6729c0923, "libbpf:
Adjust btf_vlen() to return a __u32", which expanded the BTF vlen
field from 16 to 24 bits). Declare the loop counters as __u32 to
match the return type, keeping the comparison as a plain
'__u32 < __u32' and silencing the -Wsign-compare warnings.
No functional change.
Suggested-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Liang Luo <luoliang@kylinos.cn>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
put_prev_task_scx() warns when a runnable task drops to a lower sched_class
without SCX_OPS_ENQ_LAST, on the assumption that balance_one() would have
kept it running. Core scheduling breaks that: a forced-idle SMT sibling
reschedules through the core_pick fast path in pick_next_task(), which skips
pick_task_scx() and thus balance_one(), so a runnable task can drop to idle
with ENQ_LAST unset.
Gate the warning on sched_cpu_cookie_match(): a cookie mismatch means core
scheduling forced the idle, while a match (or core scheduling off) still
catches a genuine missing-ENQ_LAST drop.
Fixes: 7c65ae81ea86 ("sched_ext: Don't call put_prev_task_scx() before picking the next task")
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
The shared GPIO descriptor used either a mutex or a spinlock, chosen at
runtime from the underlying chip's can_sleep:
shared_desc->can_sleep = gpiod_cansleep(shared_desc->desc);
... if (can_sleep) mutex_lock(); else spin_lock_irqsave();
can_sleep describes only the value path (->get/->set). Under the same
lock, however, the proxy may call gpiod_set_config() and
gpiod_direction_*(), which can reach pinctrl paths that take a mutex
(e.g. gpiod_set_config() -> gpiochip_generic_config() ->
pinctrl_gpio_set_config()), independent of can_sleep. On a controller
with non-sleeping MMIO value ops the descriptor lock was a spinlock, so
the sleeping pinctrl call ran from atomic context. Reproduced on an
Amlogic A113X board with the workaround from commit 28f240683871
("pinctrl: meson: mark the GPIO controller as sleeping") reverted; the
original Khadas VIM3 report hit the same path:
BUG: sleeping function called from invalid context
__mutex_lock
pinctrl_get_device_gpio_range
pinctrl_gpio_set_config
gpiochip_generic_config
gpiod_set_config
gpio_shared_proxy_set_config <- voting spinlock held
...
mmc_pwrseq_simple_probe
The spinlock existed to take the value vote from atomic context, but the
vote and the (possibly sleeping) control operations share the same state
and lock, so this scheme cannot serialize config under a mutex and still
offer atomic value access. Always serialize the shared descriptor with a
mutex instead and mark the proxy a sleeping gpiochip, driving the
underlying GPIO through the cansleep value accessors: those are valid
for both sleeping and non-sleeping chips, so value access keeps working
on fast controllers, at the cost of no longer being atomic.
With every vote edge now driven through the cansleep value setter,
gpio_shared_proxy_set_unlocked() no longer needs a per-call setter: drop
its set_func callback and call gpiod_set_value_cansleep() directly. The
shared direction_output path reaches it only once the line is already an
output, so driving the value there is equivalent to re-issuing
gpiod_direction_output(), without the redundant per-edge re-assertion of
drive config and bias.
This is observable: consumers gating on gpiod_cansleep() take their
sleeping branch on a proxied GPIO (mmc-pwrseq-emmc skips its
emergency-restart reset handler; its normal reset is unaffected), and
consumers that reject sleeping GPIOs (pwm-gpio, ps2-gpio, ...) would
fail to probe. Such atomic users do not share a pin through the proxy,
whose purpose is voting on shared reset/enable lines. The same narrowing
already applies on Amlogic since that workaround, and rockchip
addressed the identical splat per-driver in commit 7ca497be0016 ("gpio:
rockchip: Stop calling pinctrl for set_direction"); fixing the proxy
addresses the locking error once, for every controller.
The lock type was added by commit a060b8c511ab ("gpiolib: implement
low-level, shared GPIO support"); the sleeping call under it arrived with
the proxy driver.
Fixes: e992d54c6f97 ("gpio: shared-proxy: implement the shared GPIO proxy driver")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/all/00107523-7737-4b92-a785-14ce4e93b8cb@samsung.com/
Signed-off-by: Viacheslav Bocharov <v@baodeep.com>
Link: https://patch.msgid.link/20260630101545.800625-2-v@baodeep.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
nat_keepalive_send() frees the keepalive skb whenever the IPv4 or IPv6
send helper reports an error.
That cleanup is only correct before the skb is handed to the output
path. Once ip_build_and_send_pkt() or ip6_xmit() takes ownership, the
networking stack may already have consumed the skb before returning an
error, so freeing it again is unsafe.
Handle the pre-handoff failure cases inside nat_keepalive_send_ipv4()
and nat_keepalive_send_ipv6(), where the caller still owns the skb, and
keep nat_keepalive_send() responsible only for family dispatch and the
unsupported-family cleanup path.
Fixes: f531d13bdfe3 ("xfrm: support sending NAT keepalives in ESP in UDP states")
Cc: stable@vger.kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Qianyu Luo <qianyuluo3@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Reviewed-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Logically it was based on TCP implementation, so to make further support
easier, rewrite it in the TCP way (like in 'tcp_sendmsg_locked()'). By
this way, patch also adds handling case when 'msg_ubuf' is already set.
Signed-off-by: Arseniy Krasnov <avkrasnov@rulkc.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260628182052.951760-1-avkrasnov@rulkc.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Replace the unsafe `kernel::transmute::FromBytes` trait implementation
for the `FalconUCodeDescV3`, `PcirStruct`, `BitHeader`, `BitToken`,
`NpdeStruct`, `PciRomHeader`, `PmuLookupTableEntry` and
`PmuLookupTableHeader` structs with the derivable `zerocopy::FromBytes`
trait.
This change eliminates the manual unsafe implementations in favor of a
derivable trait. When this trait is derived, validity checks are
performed at compile time to ensure that the type can safely implement
`FromBytes`.
Suggested-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1241
Signed-off-by: Nicolás Antinori <nico.antinori.7@gmail.com>
Link: https://patch.msgid.link/20260629142007.269873-1-nico.antinori.7@gmail.com
[acourbot: add `vbios:` prefix to commit title.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
|
|
virtio_gpu_init() sends GET_DISPLAY_INFO when scanouts are present and
waits for display_info_pending to clear. If the response never arrives,
the wait result is ignored and probe still succeeds.
Return -ETIMEDOUT on display-info timeout. Because this happens after
virtio_device_ready(), reset the device and tear down modesetting before
using the existing vbuf and virtqueue cleanup path.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/735301/
[dmitry.osipenko@collabora.com: rebase on misc-next]
|
|
Fix the checkpatch.pl warning by removing unnecessary braces from
a single-statement if-block in tb10x_gpio_probe().
Signed-off-by: Igor Putko <igorpetindev@gmail.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Fix the checkpatch.pl warning by using 'unsigned int' instead of
the bare use of 'unsigned' for the offset parameter in
tb10x_gpio_to_irq().
Signed-off-by: Igor Putko <igorpetindev@gmail.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
If the devm_pinctrl_register() function fails,
bcm2835_pinctrl_probe() calls gpiochip_remove()
before gpiochip_add_data() has registered the GPIO chip.
This means that upon failure the gpio_chip.gpiodev
is NULL resulting in a null pointer dereference
inside the gpiochip_remove() function.
Remove the unnecessary function call to gpiochip_remove().
No GPIO cleanup is required because the GPIO chip
has not yet been registered. Without this change there
is potential for a kernel panic upon registration failure
Fixes: 266423e60ea1 ("pinctrl: bcm2835: Change init order for gpio hogs")
Signed-off-by: Daniel McCarthy <daniel@dragonzap.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> says:
I will post DAI/Component/Card capsuling patch, but
current code makes old style / new style conversion difficult.
To make future conversions easier to understand, this patch clean up the
code a little. but no functional change.
Link: https://patch.msgid.link/87ldc1etyp.wl-kuninori.morimoto.gx@renesas.com
|
