| Age | Commit message (Collapse) | Author |
|---|
|
mtdswap_add_debugfs() creates an mtdswap_stats debugfs file under the
per-MTD debugfs directory, but mtdswap_remove_dev() never removes it
before freeing the mtdswap_dev.
Store the returned dentry and remove it during device teardown before the
driver-private state is freed.
Fixes: a32159024620 ("mtd: Add mtdswap block driver")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Add support for FudanMicro FM25G01B SPI NAND and FudanMicro FM25G02B SPI
NAND.
FM25G01B datasheet: https://www.fmsh.com/nvm/FM25G01B_ds_eng.pdf
FM25G02B datasheet: https://www.fmsh.com/nvm/FM25G02B_ds_eng.pdf
Signed-off-by: Ziyang Huang <hzyitc@outlook.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
They are partially incorrect since "software" engine does not mean
hamming, the "none" cae is also falling into this print, and on-die
means there is some kind of hardware support; we prefer to use the
wording on-host vs. on-die.
Fix all those prints.
Fixes: 1e06dbfdfb85 ("mtd: rawnand: pl353: Add message about ECC mode")
Signed-off-by: Miquel Raynal (DAVE) <miquel.raynal@bootlin.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Any access not using the hardware ECC engine should be monolithic
because the controller has its very own way of handling the end of a
transaction during operation configuration, so we cannot easily make
repeated reads.
This has the side effect of fixing support for software ECC engines.
Suggested-by: Andrea Scian <andrea.scian@dave.eu>
Cc: stable@vger.kernel.org
Fixes: 08d8c62164a3 ("mtd: rawnand: pl353: Add support for the ARM PL353 SMC NAND controller")
Signed-off-by: Miquel Raynal (DAVE) <miquel.raynal@bootlin.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
If several CE are wired, we would write the registers for every chip one
after the other, and reselect the correct timings for the first chip the
use wants to use after probe. This is not exactly efficient and could
slightly be improved since we already have a helper that applies the
configuration if there is a chip change. Instead of programming the
registers in ->setup_interface(), let's just drop the pointer to the
chip and let the nand_select_target() helper do its magic.
Cc: Olivier Sobrie <olivier@sobrie.be>
Signed-off-by: Miquel Raynal (DAVE) <miquel.raynal@bootlin.com>
Acked-by: Olivier Sobrie <olivier@sobrie.be>
Tested-by: Olivier Sobrie <olivier@sobrie.be>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The HeYangTek HYF1GQ4UDACAE is a 1 Gbit (128 MiB) SLC SPI-NAND with
2048 + 64 byte pages and on-die 4-bit / 512-byte ECC; its JEDEC
manufacturer ID is 0xc9. The die is GD5F1GQ4-compatible, so the OOB
layout is taken from the in-tree gd5fxgq4xa. The die exposes only a
coarse 2-bit ECC status with no fine-grained bitflip-count register, so
the status is decoded into a representative number of corrected bitflips.
It is found, among others, on some Keenetic KN-3411 (Buddy 6) units.
Datasheet:
https://www.heyangtek.cn/previewfile.jsp?file=ABUIABA9GAAgwsvRnwYo-eDpsgc
Signed-off-by: Aleksei Sviridkin <f@lex.la>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
mtd_add_partition() checks that 'length' is positive but does not
validate that 'offset + length' fits within the parent partition's
size. A userspace caller using the BLKPG_ADD_PARTITION ioctl can
supply a crafted large 'length' value that passes the length <= 0
check, causing add_mtd_device() to fire a WARN_ON() when it detects
the oversized partition.
Fix this by adding explicit bounds checks before allocate_partition()
is called:
- Reject negative or out-of-range offsets.
- Use u64 arithmetic to safely check offset + length <= parent_size,
avoiding potential signed integer overflow.
Reported-by: syzbot+3ae80219c633aca5431c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=3ae80219c633aca5431c
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
When parsing partition layouts, if a partition requested with
MTDPART_OFS_RETAIN runs out of space, the allocator jumps directly
to 'out_register' to preserve partition numbering.
However, this jump bypasses child->erasesize initialization, leaving
it at zero. When add_mtd_device() is later called on this child, the
registration fails and triggers a WARN_ON() due to the zero ->erasesize.
Fix this by zeroing out child->part.offset and child->part.size, and
initializing child->erasesize to parent->erasesize. This is the exact
same pattern already used just a few lines below in the "out of reach"
error check (child->part.offset >= parent_size) to safely register a
disabled partition.
Reported-by: syzbot+3ae80219c633aca5431c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=3ae80219c633aca5431c
Signed-off-by: Nikolay Ivchenko <nivchenko.dev@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
When compile-testing on x86 without CONFIG_OF, the ndfc driver produces
a harmless warning:
drivers/mtd/nand/raw/ndfc.c: In function 'ndfc_probe':
include/linux/dev_printk.h:154:31: error: 'len' is used uninitialized [-Werror=uninitialized]
154 | dev_printk_index_wrap(_dev_err, KERN_ERR, dev, dev_fmt(fmt), ##__VA_ARGS__)
| ^
drivers/mtd/nand/raw/ndfc.c:196:17: note: in expansion of macro 'dev_err'
196 | dev_err(&ofdev->dev, "unable read reg property (%d)\n", len);
Limit compile-testing to configurations with CONFIG_OF to trivially
avoid this. The driver will still be built in allmodconfig and many
randconfig builds.
Fixes: 4f2692a5383e ("mtd: rawnand: ndfc: use ioread32be/iowrite32be and allow COMPILE_TEST")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
spinand_mtd_regular_page_read() returns ret after iterating over the
requested pages. If the request contains no data or OOB bytes, the
iterator does not run and ret is not assigned. Initialize it to 0 for the
empty request path.
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
mtd_concat_destroy() frees item->concat so calling
mtd_virt_concat_put_mtd_devices(item->concat) after that leads to a
use-after-free.
Fix it by moving mtd_virt_concat_put_mtd_devices() before
mtd_concat_destroy().
Fixes: 43db6366fc2d ("mtd: Add driver for concatenating devices")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
ingenic_ecc_get() obtains a provider device reference and then enables
the ECC clock before returning the ECC handle.
The clk_prepare_enable() return value is currently ignored. If enabling
the clock fails, the function still returns the ECC handle and keeps the
provider device reference even though the acquire operation did not
complete.
Return the clock enable error and drop the provider device reference on
that failure path.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
mtk_ecc_get() gets a reference to the ECC platform device, obtains the
provider state and then enables the ECC clock before initializing the
hardware.
The clk_prepare_enable() return value is currently ignored. If enabling
the clock fails, the code still touches the ECC registers and returns a
live ECC handle to the caller. The provider device reference acquired
by of_find_device_by_node() is also kept even though the handle setup
failed.
Propagate the clock enable error and drop the provider device reference
on that failure path.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
mtd_concat_destroy() frees item->concat so calling
mtd_virt_concat_put_mtd_devices(item->concat) leads to a use after free.
Fix this by moving mtd_virt_concat_put_mtd_devices() before
mtd_concat_destroy()
Fixes: 43db6366fc2d ("mtd: Add driver for concatenating devices")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Now that this can be built with COMPILE_TEST, an unassigned variable was
found. Set to 0 to fix the W=1 error under GCC.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202606141301.iyVdFgl7-lkp@intel.com/
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
A comment in drivers/mtd/maps/map_funcs.c incorrectly refers to
CONFIG_COMPLEX_MAPPINGS instead of CONFIG_MTD_COMPLEX_MAPPINGS. Correct
it.
Discovered while searching for CONFIG_* symbols referenced in code but
not defined in any Kconfig file.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
cfi_intelext_reboot() puts each chip into FL_SHUTDOWN (array mode) via
the reboot notifier so the bootloader can read the flash on the next
boot. If pm_suspend then runs on the same chip during the shutdown
sequence, cfi_intelext_suspend() falls into the default branch and
prints:
Flash device refused suspend due to active operation (state 20)
The chip is not active; it is already shut down. Treat FL_SHUTDOWN the
same as FL_PM_SUSPENDED in the suspend switch so nothing is done and
no warning is emitted.
Reproduced on every boot of the QEMU 'virt' arm64 machine, which
exposes two Intel-Sharp pflash chips.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
cec_pin_update() fills work_pin_events[] and work_pin_ts[], then
increments work_pin_num_events. cec_pin_thread_func() uses that counter
to decide when to read the FIFO entries.
Do not let the counter update be observed without the event update. Also
do not let a freed slot be reused before the thread has finished reading
it. Use release operations when publishing an entry and releasing a slot,
and acquire operations when consuming those counter updates.
Leave the other work_pin_num_events users as they do not participate in
this FIFO publication path.
Fixes: ea5c8ef29668 ("media: cec-pin: add low-level pin hardware support")
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
stm32_cec_adap_log_addr() waits for TXSOM to clear before disabling CEC
and updating the logical address registers. The wait result is ignored,
so a timeout can still be reported as a successful logical address
update.
Return the polling error before touching the address registers. Compute
the address mask only for valid logical addresses so the invalid-address
path does not evaluate a shift based on CEC_LOG_ADDR_INVALID.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
cec_transmit_msg_fh() drops adap->lock to wait for a blocking transmit in
wait_for_completion_killable(). If that wait is interrupted by a signal,
cancel_delayed_work_sync() can run before the CEC kthread arms the reply
timeout via schedule_delayed_work(&data->work) in cec_transmit_done_ts().
The work is then armed after the cancel, and the data is freed with its
delayed_work still pending:
ODEBUG: free active (active state 0) object: ... hint: cec_wait_timeout
Use disable_delayed_work_sync(): it cancels the work and disables it, so
the later schedule_delayed_work() becomes a no-op and the work cannot be
re-armed. The data is freed right after, so it need not be re-enabled.
Fixes: 490d84f6d73c ("media: cec: forgot to cancel delayed work")
Reported-by: syzbot+051024d603432b4ab395@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=051024d603432b4ab395
Suggested-by: Hillf Danton <hdanton@sina.com>
Cc: stable@vger.kernel.org
Signed-off-by: Biren Pandya <birenpandya@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add check to prevent overflowing msg.msg[] in case the incoming data
is malformed.
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Reviewed-by: Sean Young <sean@mess.org>
Fixes: 056f2821b631 ("media: cec: extron-da-hd-4k-plus: add the Extron DA HD 4K Plus CEC driver")
Cc: stable@vger.kernel.org
|
|
stm32_rx_done() appends each received CEC byte to rx_msg.msg[] using
rx_msg.len as the write index, incrementing it on every RXBR
(receive-byte-ready) interrupt without checking it against the buffer
size:
cec->rx_msg.msg[cec->rx_msg.len++] = val & 0xFF;
rx_msg.msg[] is a fixed CEC_MAX_MSG_SIZE (16) byte array in struct
cec_msg, and rx_msg.len is only reset on RXACKE/RXOVR or after a
completed message (RXEND). The number of bytes received before RXEND is
decided by the remote CEC device (it sets EOM), not by the driver. A
peer that keeps sending bytes without ending the message drives RXBR
repeatedly, pushing rx_msg.len past 16 and writing peer-controlled bytes
out of bounds into the surrounding memory. This is reachable in normal
operation once the driver has probed and receiving is enabled, from the
IRQ thread, without any local privilege.
The length check in the CEC core runs on the consumer side, after the
byte has been stored, so it does not prevent the overflow. Bound the
index in the driver before the store, as the other platform CEC drivers
already do (e.g. tegra_cec), dropping the excess bytes of an overlong
frame.
Found by static analysis tool CodeQL.
Fixes: d69ae57453c8 ("[media] cec: add STM32 cec driver")
Cc: stable@vger.kernel.org
Signed-off-by: Weigang He <geoffreyhe2@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The commit dccc0c3ddf8f ("media: rc: fix race between unregister and
urb/irq callbacks") removed the implicit call to rc_free_device() from
rc_unregister_device(). However, the commit missed to remove the NULL
assignment of adap->rc that is now causing rc_free_device() to never be
called on an allocated rc device.
kmemleak reports following after e.g. dw-hdmi unbind:
unreferenced object 0xffff00010ac10000 (size 4096):
comm "kworker/u16:1", pid 39, jiffies 4294897739
hex dump (first 32 bytes):
20 23 4b 0a 01 00 ff ff 08 00 c1 0a 01 00 ff ff #K.............
08 00 c1 0a 01 00 ff ff 00 00 00 00 00 00 00 00 ................
backtrace (crc e11baccc):
kmemleak_alloc+0x38/0x44
__kmalloc_cache_noprof+0x4a8/0x5e0
rc_allocate_device+0x48/0x2a0
cec_allocate_adapter+0x3ac/0x800
dw_hdmi_cec_probe+0x264/0x634
platform_probe+0xc0/0x188
really_probe+0x4a4/0x8e0
__driver_probe_device+0x2f8/0x440
driver_probe_device+0x60/0x160
__device_attach_driver+0x1a0/0x2a0
bus_for_each_drv+0x100/0x1a0
__device_attach+0x174/0x350
device_initial_probe+0x90/0xb0
bus_probe_device+0x4c/0x120
device_add+0xdec/0x116c
platform_device_add+0x354/0x598
Remove the assignment of adap->rc to NULL to let cec_delete_adapter()
free the allocated rc device after last user of the cec device exits to
fix the kmemleak.
Fixes: dccc0c3ddf8f ("media: rc: fix race between unregister and urb/irq callbacks")
Cc: stable@vger.kernel.org
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The driver registers two regmaps on the same platform device: an MMIO
regmap for the AO CEC registers, and an indirect regmap (using
reg_read()/reg_write() callbacks) for the CEC controller core registers.
Neither regmap_config sets a .name, so both default their debugfs
directory to the device name and collide:
debugfs: 'ff800280.cec' already exists in 'regmap'
Because of the clash the second regmap's debugfs directory fails to
register, so its registers can no longer be inspected via debugfs.
Give the indirect CEC core regmap a distinct name. The two debugfs
directories then become "<dev>.cec" and "<dev>.cec-core". This only
affects debugfs naming; register access is unchanged.
Tested on an ODROID-N2 (Amlogic S922X): the warning is gone and both
/sys/kernel/debug/regmap/ff800280.cec and ff800280.cec-core are present.
Fixes: b7778c46683c ("media: platform: meson: Add Amlogic Meson G12A AO CEC Controller driver")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Yi Ding <yi.s.ding@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
__csd_lock_record() publishes per-CPU diagnostic state (cur_csd,
cur_csd_func, cur_csd_info) that is consumed from a remote CPU by
csd_lock_wait_toolong() via smp_load_acquire(&cur_csd). To order the
matching cur_csd_func/cur_csd_info stores before the cur_csd
publication, the producer issues smp_wmb() before writing cur_csd;
to order the publication before the subsequent callback execution or
CSD unlock, it issues smp_mb() after the write. The clear path
mirrors this with smp_mb() before storing NULL into cur_csd so the
preceding callback/unlock is observed first.
The smp_mb() pair is heavier than what the consumer actually
requires (on x86 each emits a locked full barrier). The consumer
only needs to observe the matching cur_csd_func/cur_csd_info when it
sees a non-NULL cur_csd, and to observe the preceding callback/unlock
when it sees NULL -- both of which a release/acquire pair provides.
The extra two-way ordering enforced by smp_mb() -- that cur_csd
publication be observed before callback execution or unlock becomes
visible -- would only matter if cur_csd were an exact live-state
marker. csd_lock_wait_toolong() does not treat it that way: it
snapshots cur_csd via smp_load_acquire() and then prints / dumps /
re-IPIs without an RCU-style stall-ended recheck, so the diagnostic
already tolerates the remote CPU completing its work between snapshot
and report. cur_csd is best-effort context, not a precise stall
boundary.
Replace the smp_wmb() + plain store + smp_mb() in the publish path,
and the smp_mb() + plain store in the clear path, with
smp_store_release(). This pairs with the smp_load_acquire() in
csd_lock_wait_toolong(): preceding cur_csd_func/cur_csd_info stores
become visible before a remote reader observes the non-NULL
publication, and any preceding callback/unlock becomes visible before
a reader observes the NULL clear.
Signed-off-by: Usama Arif <usama.arif@linux.dev>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Dmitry Ilvokhin <d@ilvokhin.com>
Link: https://patch.msgid.link/20260629105745.1696683-1-usama.arif@linux.dev
|
|
While the GCC and Clang compilers already define __ASSEMBLER__
automatically when compiling assembly code, __ASSEMBLY__ is a macro that
only gets defined by the Makefiles in the kernel.
This can be very confusing when switching between userspace and kernelspace
coding, or when dealing with uapi headers that rather should use
__ASSEMBLER__ instead.
So standardize now on the __ASSEMBLER__ macro that is provided by the
compilers.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://patch.msgid.link/20260619100600.121042-1-thuth@redhat.com
|
|
The callers already have a valid irq_data pointer, so the NULL checks in
__irq_domain_[de]activate_irq() is redundant.
Remove it.
[ tglx: Massage changelog, fix subject prefix ]
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260623075134.4432-4-shikemeng@huaweicloud.com
|
|
Replace the open coded version of it.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260623075134.4432-3-shikemeng@huaweicloud.com
|
|
When irq_domain_trim_hierarchy() fails in irq_domain_alloc_irqs_locked(),
the error handling path fails to undo the hierarchy allocations.
Add the missing cleanup.
[ tglx: Massage change log ]
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260623075134.4432-2-shikemeng@huaweicloud.com
|
|
According to both the static definition in downstream...
yupik-audio-overlay.dtsi: qcom,bolero-version = <4>;
#define BOLERO_VERSION_2_0 0x0004)
and the runtime detection:
CDC_VA_TOP_CSR_CORE_ID_0=0x1
CDC_VA_TOP_CSR_CORE_ID_1=0xf
SC7280 has LPASS Codec Version 2.0 and not, as declared with
sm8250_va_data LPASS_CODEC_VERSION_1_0.
Create new va_macro_data with .version not set to use the runtime
detection and correctly get .version = LPASS_CODEC_VERSION_2_0.
Fixes: 77212f300bfd ("ASoC: codecs: lpass-va-macro: set the default codec version for sm8250")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260526-sc7280-va-macro-2-0-v1-1-2c1b572fa388@fairphone.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We do not check an error code from ->exit() callback, nor we ever
return one (it's always 0, meaning success). Make ->exit() callback
return void.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260618194036.3275202-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
|
|
Store the bound device and `BAR0` mapping in `Falcon` instead of passing
them through every `Falcon` operation. This simplifies the `Falcon` API and
removes repeated `dev`/`bar` plumbing from reset, load, boot, mailbox, DMA,
and GSP/FSP-specific Falcon helpers.
`FalconHal` now receives a reference to a `Falcon` and uses its methods and
members instead of passing them individually.
Suggested-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://rust-for-linux.zulipchat.com/#narrow/channel/509436-Nova/topic/Storing.20driver-bound.20references.20into.20sub-devices/near/599137882
Signed-off-by: Tim Kovalenko <tim.kovalenko@proton.me>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260625-drm-bar-refactor-v2-1-9db6b890d92e@proton.me
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
|
|
Extend the Intel Remote System Update (RSU) driver to retrieve the
device info table through an ARM SMC call to the service layer.
The table reports flash size and erase size for multiple devices.
Signed-off-by: Tze Yee Ng <tze.yee.ng@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Document the eight read-only sysfs files (size0-size3, erase_size0-
erase_size3) under platform/stratix10-rsu: flash size and erase size
in bytes, 32-bit hex per line, EIO when the value is not available.
Signed-off-by: Tze Yee Ng <tze.yee.ng@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Kernel-handled RMPP receive processing starts reassembly for active
DATA responses before the response is matched to an outstanding send.
The normal match happens later, after ib_process_rmpp_recv_wc() has
either assembled a complete message or consumed the segment.
That ordering lets an unsolicited response that routes to a kernel
RMPP agent by the high TID bits allocate or extend RMPP receive state
before the full TID and source address are checked against a real
request. A reordered burst can therefore reach the receive-side
insertion path even though the response would not match any send.
For kernel-handled RMPP DATA responses, require the existing
ib_find_send_mad() match before entering RMPP reassembly. The matcher
already checks the full TID, management class and source address/GID
against the agent wait, backlog and in-flight send lists. If there is
no match, drop the response without creating RMPP state.
This leaves the RMPP window behavior unchanged and only rejects
responses that have no corresponding request.
Fixes: fa619a77046b ("[PATCH] IB: Add RMPP implementation")
Assisted-by: Codex:gpt-5-5-xhigh
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://patch.msgid.link/3170ff3bc389a930bb1641f2caa394a0b2241579.1780774907.git.michael.bommarito@gmail.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add initial device tree support for the Intel SoCFPGA Agilex72
platform. This introduces the SoC DTSI and the SoCDK board DTS as
the first upstream submission for this platform.
The Agilex72 SoC features a heterogeneous CPU cluster with
Cortex-A520 and Cortex-A720 cores, and includes an SMMU v3 for
memory management.
Signed-off-by: Nazim Amirul <muhammad.nazim.amirul.nazle.asmade@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add the SoC and board compatible strings for the Intel SoCFPGA
Agilex72 platform.
Signed-off-by: Nazim Amirul <muhammad.nazim.amirul.nazle.asmade@altera.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
The SMMU is enabled and transactions going through it are cache
coherent. Add the dma-coherent property to the XGMAC nodes to prevent
redundant cache flush/invalidate operations and potential stale data
issues.
Signed-off-by: Nazim Amirul <muhammad.nazim.amirul.nazle.asmade@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
The SMMU is disabled in socfpga_agilex5.dtsi. The SoC uses a different
memory-mapped base address for its peripherals, which requires the SMMU
to be active so that the Secure Device Manager (SDM) can correctly
access those regions through address translation.
Signed-off-by: Nazim Amirul <muhammad.nazim.amirul.nazle.asmade@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Replace the sole hexadecimal interrupt number by a decimal number, for
consistency with all other interrupt numbers.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Extend the gmac0 interrupt list to support 8 TX and 8 RX per-channel
interrupts in addition to the combined macirq, enabling per-channel
interrupt handling for improved DMA performance.
Signed-off-by: Nazim Amirul <muhammad.nazim.amirul.nazle.asmade@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
dma_fence_dedup_array() returns 1 when called with num_fences == 0:
the for-loop body never executes, j stays at 0, and the final
`return ++j` yields 1. This contradicts both the kernel-doc ("Return:
Number of unique fences remaining in the array") and the natural
expectation that 0 input gives 0 output.
The caller __dma_fence_unwrap_merge() bails out via the
`if (count == 0 || count == 1)` fast path and so is save.
But amdgpu_userq_wait_*() could reach the dedup call with a zero local
count and dereference an uninitialized fence slot in the array.
Make the contract match the documentation by returning 0 early. This
also skips an unnecessary sort() call on an empty array.
Cc: stable@vger.kernel.org
Signed-off-by: Baineng Shou <shoubaineng@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Fixes: 575ec9b0c2f1 ("dma-fence: Add helper to sort and deduplicate dma_fence arrays")
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20260629031346.3875683-1-shoubaineng@gmail.com
|
|
The commit mentioned in the fixes tag below introduced a mechanism
through which fence producers can fully decouple from fence consumers.
This, desirable, mechanism is based on the fence's signaled-bit as the
"decoupling point".
A sophisticated interaction between RCU and atomic instructions attempts
to ensure that fence consumers can still interact with fence producers
through the dma_fence_ops (callback pointers into the producer).
This is the desired behavior: to check for decoupling, the signaled-bit
is first checked. If it's not yet signaled, RCU ensures that the ops
pointer cannot yet be NULL.
Hereby, dma_fence_signal_timestamp_locked() first sets the signaled-bit,
and then sets the ops pointer to NULL. Readers first load the ops
pointer, and then check through the signaled-bit whether the pointer can
legally be accessed.
These set and load operations could occur out of order on weakly ordered
platforms. This problem can be solved very elegantly by using the ops
pointer itself as the synchronization point. The pointer is either NULL,
or cannot become NULL while it is being used thanks to RCU.
Replace the signaled-bit check in dma_fence_timeline_name() and
dma_fence_driver_name().
Cc: stable@vger.kernel.org
Fixes: f4cc3ab824d6 ("dma-buf: protected fence ops by RCU v8")
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20260629075636.2513214-2-phasta@kernel.org
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
Commit 48478b9f7913 ("arm64/mm: Enable batched TLB flush in
unmap_hotplug_range") inadvertently introduced redundant TLB
invalidation when clearing a block entry, resulting in unnecessary
broadcast invalidation on CPUs without support for range-based
invalidation.
Re-introduce the old behaviour, along with some expanded comments to
help people working in this area next time around.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Closes: https://lore.kernel.org/all/b0d5836032ce3135bfc473f6bff791306d086925.camel@decadent.org.uk/
Fixes: 48478b9f7913 ("arm64/mm: Enable batched TLB flush in unmap_hotplug_range()")
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
[will: Reword comments and commit message]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Starting with Rust 1.98.0 (expected 2026-08-20), Rust is introducing a
couple new lints, `invalid_runtime_symbol_definitions` (deny-by-default)
and `suspicious_runtime_symbol_definitions` (warn-by-default), which check
the signature of items whose symbol name is a runtime symbol expected by
`core`.
Our build hits the second one, i.e. the warning:
error: suspicious definition of the runtime `strlen` symbol used by the standard library
--> rust/bindings/bindings_generated.rs:20018:5
|
20018 | pub fn strlen(s: *const ffi::c_char) -> usize;
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= note: expected `unsafe extern "C" fn(*const i8) -> usize`
found `unsafe extern "C" fn(*const u8) -> usize`
= help: either fix the signature or remove any attributes like `#[unsafe(no_mangle)]`, `#[unsafe(export_name = "strlen")]`, or `#[link_name = "strlen"]`
= help: allow this lint if the signature is compatible
= note: `-D suspicious-runtime-symbol-definitions` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(suspicious_runtime_symbol_definitions)]`
error: suspicious definition of the runtime `strlen` symbol used by the standard library
--> rust/uapi/uapi_generated.rs:14236:5
|
14236 | pub fn strlen(s: *const ffi::c_char) -> usize;
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= note: expected `unsafe extern "C" fn(*const i8) -> usize`
found `unsafe extern "C" fn(*const u8) -> usize`
= help: either fix the signature or remove any attributes like `#[unsafe(no_mangle)]`, `#[unsafe(export_name = "strlen")]`, or `#[link_name = "strlen"]`
= help: allow this lint if the signature is compatible
= note: `-D suspicious-runtime-symbol-definitions` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(suspicious_runtime_symbol_definitions)]`
Thus `allow` the lint in `bindings` and `uapi`.
A more targeted alternative to avoid `allow`ing it would be to pass
`--blocklist-function strlen` to `bindgen`, but we would perhaps need
to adjust if other C headers end up adding more (or Rust checking more).
Since it is just the less critical one that we hit, and since eventually
this should be properly fixed by getting upstream Rust to provide a flag
like GCC/Clang's `-funsigned-char` [2][3], just `allow` it for now.
Cc: Urgau <urgau@numericable.fr>
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Link: https://github.com/rust-lang/rust/pull/155521 [1]
Link: https://github.com/rust-lang/rust/issues/138446 [2]
Link: https://github.com/Rust-for-Linux/linux/issues/355 [3]
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Tamir Duberstein <tamird@kernel.org>
Link: https://patch.msgid.link/20260615143225.471756-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The C1-Pro SME DVMSync workaround currently samples mm_cpumask() from
arch_tlbbatch_add_pending(). It requires a DSB after every batched TLBI
so that the mask read is ordered after the hardware DVMSync, defeating
much of the reclaim batching benefit.
Introduce the sme_active_cpus mask tracking which CPUs run in user-space
with SME enabled and use it for batch flushing instead of accumulating
the mm_cpumask() of the unmapped pages.
Fixes: 0baba94a9779 ("arm64: errata: Work around early CME DVMSync acknowledgement")
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Tested-by: Joshua Liu <josliu@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
On arm64, when booting with `maxcpus` greater than the number of present
CPUs (e.g., QEMU -smp cpus=4,maxcpus=8), some CPUs are marked as 'present'
but have not yet been registered via register_cpu(). Consequently,
the per-cpu device objects for these CPUs are not yet initialized.
In cpuhp_smt_enable(), the code iterates over all present CPUs. Calling
_cpu_up() for these unregistered CPUs eventually leads to
sysfs_create_group() being called with a NULL kobject (or a kobject
without a directory), triggering the following warning in
fs/sysfs/group.c:
WARNING: fs/sysfs/group.c:137 at internal_create_group+0x41c/0x4bc, CPU#2: sh/181
[...]
Call trace:
internal_create_group+0x41c/0x4bc (P)
sysfs_create_group+0x18/0x24
topology_add_dev+0x1c/0x28
cpuhp_invoke_callback+0x104/0x20c
__cpuhp_invoke_callback_range+0x94/0x11c
_cpu_up+0x200/0x37c
When booting with ACPI, arm64 smp_prepare_cpus() currently sets all
enumerated CPUs as "present" regardless of their status in the MADT. This
causes issues with SMT hotplug control. For instance, with QEMU's
"-smp 4,maxcpus=8" configuration, the MADT GICC entries are populated as
follows:
1. The first four CPUs: `Enabled` set but `Online Capable` not set.
2. The remaining four CPUs: `Online Capable` set but `Enabled` not set
to support potential hot-plugging.
Fix this by:
1. When booting with ACPI, checking the ACPI_MADT_ENABLED flag in the GICC
entry before calling set_cpu_present() during SMP initialization.
2. Properly managing the present mask in acpi_map_cpu() and
acpi_unmap_cpu() to support actual CPU hotplug events, This aligns with
other architectures like x86 and LoongArch.
3. Update the arm64 CPU hotplug documentation to no longer state that all
online-capable vCPUs are marked as present by the kernel at boot time.
This ensures that only physically available or explicitly enabled CPUs
are in the present mask, keeping the SMT control logic consistent with
the actual hardware state.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: stable@vger.kernel.org
Link: https://uefi.org/specs/ACPI/6.5/05_ACPI_Software_Programming_Model.html#gic-cpu-interface-gicc-structure
Fixes: eed4583bcf9a ("arm64: Kconfig: Enable HOTPLUG_SMT")
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Sashiko review pointed out the following issue[1].
Commit eba4675008a6 ("arm64: arch_register_cpu() variant to check if
an ACPI handle is now available.") introduced architectural safety
blocks inside arch_unregister_cpu(). If a hot-unplug operation is
determined to be a physical hardware removal (where _STA evaluates to
!ACPI_STA_DEVICE_PRESENT), or if firmware evaluation fails, it aborts
the unregistration transaction early to protect unreadied arm64
infrastructure.
However, returning early from arch_unregister_cpu() causes a catastrophic
state tearing because the generic ACPI layer (acpi_processor_post_eject())
unconditionally continues its cleanup flow. This leaves the stale sysfs
device leaked in the memory, deadlocking any subsequent hot-add attempts
on the same CPU.
Fix it by simplifying arch_unregister_cpu() to always proceed with
the unregistration, as a pr_err_once() warning is sufficient to make
it more visible for currently not supported physical CPU removal.
Also remove the redundant NULL check on acpi_handle as it cannot be
NULL when calling arch_unregister_cpu().
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: stable@vger.kernel.org
Link: https://sashiko.dev/#/patchset/20260520022023.126670-1-ruanjinjie@huawei.com [1]
Fixes: eba4675008a6 ("arm64: arch_register_cpu() variant to check if an ACPI handle is now available.")
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Currently if an HDMI cable is connected while the system is suspended,
the HDMI audio jack status stays off after resume.
This is due to the jack state not being synced by the HDA HDMI codec
device's runtime resume, as that never happens if the device was runtime
suspended before the system suspended, or by the acomp notification
triggered from the DRM side if that happens before the HDA HDMI codec
device has resumed.
To fix this, if snd_hda_hdmi_acomp_pin_eld_notify() gets called before
the HDA HDMI codec device has resumed, mark it to be forcefully runtime
resumed at the next PM complete time.
Do this using a separate acomp_requested_resume flag that can be
temporarily set without overwriting forced_resume for drivers that
always want to force resume.
Assisted-by: Copilot:claude-sonnet-4.6
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://patch.msgid.link/20260626-hda-force-resume-eld-notify-v1-1-a92cb01393e0@collabora.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
