| Age | Commit message (Collapse) | Author |
|---|
|
This warning depends on server-provided data, we should not use
WARN here
Reported-by: Yifei Chu <yifeichu24@gmail.com>
Closes: https://lore.kernel.org/r/CAPJnbgJ7ZK7DCjCfG56hd_iKGePmAzudb4hOWd4=9r32nM+KcA@mail.gmail.com
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Message-ID: <20260529-lock-warn-v1-1-20c29580d61d@codewreck.org>
|
|
Currently, when cache=loose is enabled, file reads are cached in the
page cache, but symlink reads are not. This patch allows the results
of p9_client_readlink() to be stored in the page cache, eliminating
the need for repeated 9P transactions on subsequent symlink accesses.
This change improves performance for workloads that involve frequent
symlink resolution.
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Message-ID: <982462d17c0c0d2856763266a25eb04d080c1dbb.1779355927.git.repk@triplefau.lt>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
For cache=loose mounts, set the default negative dentry cache retention
time to 24 hours.
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Message-ID: <b5beca3e70890ab8a4f0b9e99bd69cb97f5cb9eb.1779355927.git.repk@triplefau.lt>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
Introduce a new mount option, negtimeout, for v9fs that allows users
to specify how long negative dentries are retained in the cache. The
retention time can be set in milliseconds (e.g. negtimeout=10000 for
a 10secs retention time) or a negative value (e.g. negtimeout=-1) to
keep negative entries until the buffer cache management removes them.
For consistency reasons, this option should only be used in exclusive
or read-only mount scenarios, aligning with the cache=loose usage.
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Message-ID: <b2d66500aa5a2f6540347c4aa46a4be10dd01bc6.1779355927.git.repk@triplefau.lt>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
Not caching negative dentries can result in poor performance for
workloads that repeatedly look up non-existent paths. Each such
lookup triggers a full 9P transaction with the server, adding
unnecessary overhead.
A typical example is source compilation, where multiple cc1 processes
are spawned and repeatedly search for the same missing header files
over and over again.
This change enables caching of negative dentries, so that lookups for
known non-existent paths do not require a full 9P transaction. The
cached negative dentries are retained for a configurable duration
(expressed in milliseconds), as specified by the ndentry_timeout
field in struct v9fs_session_info. If set to -1, negative dentries
are cached indefinitely.
This optimization reduces lookup overhead and improves performance for
workloads involving frequent access to non-existent paths.
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Message-ID: <e542317dd03bbadb5249abd3ea6aecfdca692c19.1779355927.git.repk@triplefau.lt>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
When mkdir succeeds, v9fs_vfs_mkdir_dotl() and v9fs_vfs_mkdir() return
ERR_PTR(0) which is incorrect. They should return NULL instead for
success and ERR_PTR() only with negative error codes for failure.
Return NULL instead of passing to ERR_PTR while err is zero
Fixes smatch warnings:
fs/9p/vfs_inode_dotl.c:420 v9fs_vfs_mkdir_dotl() warn: passing zero to 'ERR_PTR'
fs/9p/vfs_inode.c:695 v9fs_vfs_mkdir() warn: passing zero to 'ERR_PTR'
The v9fs_vfs_mkdir() code was further simplified because v9fs_create()
can never return NULL, so we do not need to check for fid being set
separately, and the error path can be a simple return immediately after
v9fs_create() failure.
There is no intended functional change.
Fixes: 88d5baf69082 ("Change inode_operations.mkdir to return struct dentry *")
Suggested-by: David Laight <david.laight.linux@gmail.com>
Acked-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Message-ID: <20260520022650.14217-1-zenghongling@kylinos.cn>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
When p9_client_walk() is called with clone set to false, fid aliases
oldfid. If the walk subsequently fails after the request has been sent,
the error path jumps to clunk_fid, which currently calls p9_fid_put(fid)
unconditionally.
This drops a reference to oldfid even though ownership of oldfid remains
with the caller. If this is the last reference, oldfid can be clunked and
destroyed while the caller still expects it to be valid. A later use or
put of oldfid can then trigger a use-after-free or refcount underflow.
Fix this by only putting fid in the clunk_fid error path when it does not
alias oldfid, matching the existing guard in the error path below.
This can be triggered when a multi-component walk is split into multiple
p9_client_walk() calls and a later non-cloning walk fails. A reproducer
and refcount warning logs are available on request.
Fixes: b48dbb998d70 ("9p fid refcount: add p9_fid_get/put wrappers")
Cc: stable@vger.kernel.org
Reported-by: Yuxiang Yang <yangyx22@mails.tsinghua.edu.cn>
Reported-by: Ao Wang <wangao@seu.edu.cn>
Reported-by: Xuewei Feng <fengxw06@126.com>
Reported-by: Qi Li <qli01@tsinghua.edu.cn>
Reported-by: Ke Xu <xuke@tsinghua.edu.cn>
Assisted-by: GLM 5.1
Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Message-ID: <20260528053918.53550-1-zhaoyz24@mails.tsinghua.edu.cn>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
The primary interrupt handler (imx_mu_isr()) no longer invokes any
callbacks it only masks the interrupt source and returns. In a
forced-threaded environment the IRQ-core will force-thread the primary
handler which can be avoided.
The primary handler uses a spinlock_t to protect the RMW operation in
imx_mu_xcr_rmw() - nothing that may introduce long latencies.
The lock can be turned into a raw_spinlock_t and then the primary
handler can run in hardirq context even on PREEMPT_RT skipping one
thread.
Make struct imx_mu_priv::xcr_lock a raw_spinlock_t and skip
force-threading the primrary handler by marking it IRQF_NO_THREAD.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Move RXDB callback handling into the threaded handler. This similar to
the RX side and since the imx_mu_dcfg::rxdb callback can return an error, the
interrupt is only enabled on success.
Move RXDB callback handling into the threaded handler.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Move RX callback handling into the threaded handler. This is similar to
the TX side except that we explicitly mask the source interrupt in the
primary handler and unmask it in the threaded handler again after
success. This was done automatically in the TX part.
The masking/ unmasking can be removed from imx_mu_specific_rx() since it
already happens in the primary/ threaded handler before invoking the
channel specific callback.
Move RX channel handling into threaded handler.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Split the mailbox irq handling into a primary handler (imx_mu_isr()) and
a threaded handler (imx_mu_isr_th()). The primary handler masks the
interrupt event so the threaded handler can run without raising the
interrupt again.
The goal here is to invoke the mailbox core functions (such as
mbox_chan_received_data(), mbox_chan_txdone()) in preemptible context which is
made possible by using an threaded interrupt handler. This in turn means that
mailbox's client callbacks are invoked in preemptible context, too. This then
allows the mailbox client callback to skip an indirection via a workqueue if
it requries preemptible callback.
As a first step, prepare the logic and move TX handling part.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
imx_mu_specific_rx() masks channel 0 and unmasks it again at the end of
the function. Given that at startup the channel index got unmasked it
should do the right job.
This here either unmasks the actual channel or another one but should
have no impact given that it reverses its doing at the end.
Peng Fan commented here:
| For specific rx channel, whether it is i.MX8 SCU or i.MX ELE, actually there is
| only 1 channel as of now, but it seems better to use cp->idx in case more
| channels in future.
Use the channel index instead of zero.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
The driver uses of_platform_populate() but does not remove the added
devices on removal. This can lead to "double devices" on module removal
followed by adding the module again.
Use devm_of_platform_populate() to remove the populated devices once the
parent device is removed.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
sashiko complained about early usage of the device while probe isn't
completed. This can be mitigated by delaying the pm_runtime_enable()
into the removal path instead doing it early. This ensures that in an
error case the device is removed (and imx_mu_shutdown()) before
pm_runtime_disable() so we don't have to do this manually.
For the order to work, lets move devm_mbox_controller_register() until
after the pm-runtime part. So the reverse order will be mbox-controller
removal followed by disabling pm runtime.
Use devm_pm_runtime_enable(), remove manual pm_runtime_disable()
invocations and move the pm_runtime handling in probe before
devm_mbox_controller_register().
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
sashiko complained about possible teardown problem. The scenario
CPU 0 CPU 1
imx_mu_isr() imx_mu_shutdown()
imx_mu_xcr_rmw(priv, IMX_MU_RCR, 0, IMX_MU_xCR_RIEn(priv->dcfg->type, cp->idx));
imx_mu_specific_rx()
imx_mu_xcr_rmw(priv, IMX_MU_RCR, IMX_MU_xCR_RIEn(priv->dcfg->type, 0), 0);
free_irq()
The RX event remains enabled because in this short window the RX event
was disabled in ->shutdown() while the interrupt was active and then
enabled again by the ISR while ->shutdown waited in free_irq().
This race requires timing and if happens can be problematic on shared
handlers if the "removed" channel triggers an interrupt. In this case
the irq-core will shutdown the interrupt with the "nobody cared"
message.
Introduce imx_mu_con_priv::shutdown to signal that the channel is
shutting down. This flag is set with the lock held (by
imx_mu_xcr_clr_shut()). The unmask side uses imx_mu_xcr_set_act() which
only enables the event if the channel has not been shutdown and
serialises on the same lock.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
imx_mu_generic_tx() for the IMX_MU_TYPE_TXDB_V2 type polls on a register
which may timeout and is recognized as an error. This error is siltently
dropped and not dropped to the caller.
Forward the error to the caller.
Fixes: b5ef17917f3a7 ("mailbox: imx: fix TXDB_V2 channel race condition")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Commit 186d124f07da ("tpm_eventlog.c: fix binary_bios_measurements")
split the output to write the endian-converted event header first and
then the variable-length event data.
However, the split was at sizeof(struct tcpa_event) - 1, even though
event_data was a zero-length array, and later a flexible array member,
both of which already excluded the event data.
Therefore, the current code writes the first three bytes of event_size
from the endian-converted header and then the last byte from the raw
header, which can emit a corrupted event_size on PPC64, where
do_endian_conversion() maps to be32_to_cpu().
Split one byte later to write the full endian-converted header first,
followed by the variable-length event->event_data.
Fixes: 186d124f07da ("tpm_eventlog.c: fix binary_bios_measurements")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
commit 746d9e9f62a6 ("tpm: tpm_crb_ffa: try to probe tpm_crb_ffa when it's built-in")
probe tpm_crb_ffa forcefully when it's built-in to integrate with IMA.
However, IMA now provides the IMA_INIT_LATE_SYNC build option, which
initialises IMA at the late_initcall_sync level, so this change is no
longer required.
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Link: https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux.git/commit/?h=for-next/ffa/updates&id=cc7e8f21b9f0c229d68cf19a837cba82b5ac2d87 [0]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux.git/commit/?h=for-next/ffa/updates&id=e659fc8e537c7a21d5d693d6f30d8852f2fa8d91 [1]
Link: https://lore.kernel.org/r/20260605144325.434436-5-yeoreum.yun@arm.com
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
tpm_buf_append_salt() in drivers/char/tpm/tpm2-sessions.c calls
crypto_kpp_generate_public_key() and crypto_kpp_compute_shared_secret()
without installing a completion callback, discards both return values,
and immediately frees the kpp_request via kpp_request_free(). When the
resolved ecdh-nist-p256 KPP backend is asynchronous (atmel-ecc, HPRE,
keembay-ocs), either operation returns -EINPROGRESS and the deferred
completion worker dereferences the freed request.
The path fires automatically from the hwrng_fillfn kernel thread via
tpm_get_random -> tpm2_get_random -> tpm2_start_auth_session ->
tpm_buf_append_salt on every entropy poll, without any userland action.
Install crypto_req_done as the completion callback, wrap both KPP
operations in crypto_wait_req(), and propagate errors to the caller.
The wait is a no-op for synchronous backends.
Fixes: 1085b8276bb4 ("tpm: Add the rest of the session HMAC API")
Cc: stable@vger.kernel.org # v6.10+
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Assisted-by: Claude:claude-opus-4-7
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Some TPMs fail to grant locality when requested immediately after being
relinquished. In this case, the TPM_ACCESS_REQUEST_USE bit of the
TPM_ACCESS register is cleared immediately without setting
TPM_ACCESS_ACTIVE_LOCALITY.
This issue can be seen at boot since tpm_chip_start, called right
after locality is relinquished, will fail. This causes the probe to
fail:
tpm_tis MSFT0101:00: probe with driver tpm_tis failed with error -1
This occurs on some older Dell Latitudes. For the Nuvoton TPM used in
these machines, add a delay after locality is relinquished.
Signed-off-by: Jim Broadus <jbroadus@gmail.com>
Link: https://lore.kernel.org/r/20260526232245.5409-3-jbroadus@gmail.com
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The entire 32 bit did_vid is read from the device, but only the 16 bit
vendor id portion was stored in the tpm_tis_data structure. Storing the
entire value allows the device id to be used to handle quirks. Printing
the vid and did in the error case also helps identify problem devices.
Signed-off-by: Jim Broadus <jbroadus@gmail.com>
Link: https://lore.kernel.org/r/20260526232245.5409-2-jbroadus@gmail.com
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
tpm_crb driver.
Fixes: 48fe2cddc85c ("tpm_crb: Convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/2848144.mvXUDI8C0e@rafael.j.wysocki
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
wait_event_interruptible_timeout() evaluates its condition after setting
the current task state to TASK_INTERRUPTIBLE.
With CONFIG_DEBUG_ATOMIC_SLEEP this triggers a warning when the IRQ wait
path is used:
tpm_tis_status()
tpm_tis_spi_read_bytes()
tpm_tis_spi_transfer_full()
spi_bus_lock()
mutex_lock()
Address this with the following measures:
1. Call wait_tpm_stat_cond() only while tasking is running.
2. Use wait_woken() to wait for changes.
Cc: stable@vger.kernel.org # v4.19+
Cc: Linus Walleij <linusw@kernel.org>
Reported-by: Stefan Wahren <wahrenst@gmx.net>
Closes: https://lore.kernel.org/linux-integrity/6964bec7-3dbb-453b-89ef-9b990217a8b9@gmx.net/
Fixes: 1a339b658d9d ("tpm_tis_spi: Pass the SPI IRQ down to the driver")
Reviewed-by: Linus Walleij <linusw@kernel.org>
Tested-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
tpm_buf_append_name() supports callers passing a pre-computed name
for handles. When name is non-NULL, the code skips the
tpm2_read_public() path but leaves name_size_alg uninitialized
before it is used as the memcpy size argument.
No current in-tree caller passes a non-NULL name, but future use
cases such as name caching would exercise this path. Initialize
name_size_alg by calling name_size() on the caller-provided name,
sharing the error check and assignment with the existing
tpm2_read_public() path. This prevents unmasking a latent bug when
the non-NULL name path is eventually used.
Assisted-by: Kiro:claude-opus-4.6
Reviewed-by: Justinien Bouron <jbouron@amazon.com>
Reviewed-by: Muhammad Hammad Ijaz <mhijaz@amazon.com>
Signed-off-by: Gunnar Kudrjavets <gunnarku@amazon.com>
Link: https://lore.kernel.org/r/20260510171152.4607-1-gunnarku@amazon.com
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Commit 207696b17f38 ("tpm: use a map for tpm2_calc_ordinal_duration()")
inadvertently reduced the timeout for TPM2 key creation commands
(`CREATE_PRIMARY`, `CREATE`, `CREATE_LOADED`) from 300 seconds to 30
seconds.
This causes intermittent timeout failures, with several failures observed
across hundreds of test runs on some Intel platforms using Infineon
SLB9670 and SLB9672 TPM modules. Restore the timeout to 300 seconds to
avoid spurious failures.
Cc: stable@vger.kernel.org # v6.18+
Fixes: 207696b17f38 ("tpm: use a map for tpm2_calc_ordinal_duration()")
Co-developed-by: Lili Li <lili.li@intel.com>
Signed-off-by: Lili Li <lili.li@intel.com>
Signed-off-by: Baoli Zhang <baoli.zhang@linux.intel.com>
Link: https://lore.kernel.org/r/20260421005021.13765-1-baoli.zhang@linux.intel.com
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Constify the SVSM vTPM ops. It is statically initialized and never
written to, so let's store it in .rodata.
Every other tpm_class_ops instance in drivers/char/tpm/ is already
const.
Signed-off-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20260505202738.145800-1-dwindsor@gmail.com
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
This needs to test for nonzero retval.
Fixes: c54c7c685494 ("netfilter: nft_meta_bridge: add NFT_META_BRI_IIFPVID support")
Closes: https://sashiko.dev/#/patchset/20260618061631.21919-1-fw%40strlen.de
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This patch replaces the timer API by GC worker approach for
expectations, as it already happened in many other subsystems.
Use the existing conntrack GC worker to iterate over the local list of
expectations in the master conntrack to reap expired expectations.
Check IPS_HELPER_BIT to run GC for expectations, set it on for nft_ct
expectation which nevers sets it. Hold the expectation spinlock while
iterating over the master conntrack expectation list to synchronize with
nf_ct_remove_expectations(). This also performs runtime packet path
garbage collection through the expectation insertion and lookup
functions while walking over one of the chains of the global expectation
hashtables. Unconfirmed conntrack entries are skipped since ct->ext can
be reallocated and dying are skipped since those will be gone soon.
Set on IPS_HELPER_BIT if the helper ct extension is added, then the new
GC worker does not need to bump the ct refcount to check if the ct->ext
helper is available.
This removes the extra bump on the refcount for expectation timers, this
allows to remove several nf_ct_expect_put() calls after the unlink,
after this update only refcount remains at 1 while on the expectation
hashes.
This patch implicitly addresses a race with the existing timer API
allowing an expectation to access a stale exp->master pointer which has
been already released when expectation removal loses races with an
expiring timer, ie. timer_del() reporting false.
Add a new NF_CT_EXPECT_DEAD flag to reap this expectation via GC. This
is needed by nf_conntrack_unexpect_related() which is called in error
paths to invalidate newly created expectations that has been added into
the hashes. These expectactions cannot be inmediately released as GC or
nf_ct_remove_expectations() could race to make it. On expectation
insert, the runtime GC reaps stale expectations before checking the
expectation limit set by policy.
Set current timestamp in nf_ct_expect_alloc(), then add the expectation
policy timeout (or custom timeout specified added on top of this) to
specify the expectation lifetime.
Fixes: bffcaad9afdf ("netfilter: ctnetlink: ensure safe access to master conntrack")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Not a big deal but this hould have used the real ip header length and not the
base header size. As-is, if there are options then
nf_skb_is_icmp_unreach() result will be random.
Fixes: db99b2f2b3e2 ("netfilter: nf_reject: don't reply to icmp error messages")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
LLM points out that the skip causes unitialised stack array to
propagate down into dev_fill_forward_path(). Its not clear to me that
there is a guarantee that a later ctx.dev->netdev_ops->ndo_fill_forward_path()
would always fix this up.
Cc: Felix Fietkau <nbd@nbd.name>
Fixes: 45ca3e61999e ("netfilter: nft_flow_offload: skip dst neigh lookup for ppp devices")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Blamed commit added NFT_META_BRI_IIFHWADDR to the set validate callback,
yet this is a get operation.
Add a get validate callback and move the NFT_META_BRI_IIFHWADDR key
there.
AFAICS this is harmless, NFT_META_BRI_IIFHWADDR can deal with a NULL
input device and the set handler ignores a NFT_META_BRI_IIFHWADDR
operation, but it allows to read 4 bytes off bridge skb->cb[].
Fixes: cbd2257dc96e ("netfilter: nft_meta_bridge: introduce NFT_META_BRI_IIFHWADDR support")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Large offsets were rejected based on netlink policy, but blamed commit
removed the policy without updating nft_payload_inner_init() to use the
truncation-check helper.
Silent truncation is not a problem, but not wanted either, so add a
check.
Fixes: 077dc4a27579 ("netfilter: nft_payload: extend offset to 65535 bytes")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Sashiko noticed that when destroying a set,
cancel_delayed_work_sync() was called while gc
calls queue_delayed_work() unconditionally which
can lead not to properly shutting down the gc.
Fixes: f66ee0410b1c ("netfilter: ipset: Fix "INFO: rcu detected stall in hash_xxx" reports")
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Sashiko pointed out that kfree_rcu() was called before
rcu_assign_pointer() in handling the comment extension.
Fix the order so that rcu_assign_pointer() called first.
Fixes: b57b2d1fa53f ("netfilter: ipset: Prepare the ipset core to use RCU at set level")
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The pair of the patch "netfilter: ipset: Don't use test_bit() in lockless
RCU readers in hash types" for the bitmap types.
Fixes: 02a3231b6d82 ("netfilter: nf_conntrack_expect: store netns and zone in expectation")
Fixes: b0da3905bb1e ("netfilter: ipset: Bitmap types using the unified code base")
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Sashiko pointed out that there are a few lockless RCU readers
using test_bit() which is a relaxed atomic operation and
provides no memory barrier guarantees. Use test_bit_acquire()
instead where the operation may run parallel with add/del/gc,
i.e. is not one from the next cases
- protected by region lock
- in a set destroy phase
- in a new/temporary set creation phase
Fixes: 18f84d41d34f ("netfilter: ipset: Introduce RCU locking in hash:* types")
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Once the 32-bit seq wraps, a newer bm_seq can look smaller
than old, so .. covert to wrap-safe calculate way.
Signed-off-by: Chen Cheng <chencheng@fnnas.com>
Link: https://patch.msgid.link/20260618025735.915113-1-chencheng@fnnas.com
Signed-off-by: Yu Kuai <yukuai@fygo.io>
|
|
KCSAN reports a data race between raid1_end_read_request() and
raid1_read_request().
The completion path updates conf->mirrors[disk].head_position in
update_head_pos() without a lock, while the read-balance heuristic reads
the same field locklessly in is_sequential() and choose_best_rdev().
KCSAN report:
=========================
BUG: KCSAN: data-race in raid1_end_read_request / raid1_read_request
write to 0xffff8f0306ba7868 of 8 bytes by interrupt on cpu 9:
raid1_end_read_request+0xb5/0x440
bio_endio+0x3c9/0x3e0
blk_update_request+0x257/0x770
scsi_end_request+0x4d/0x520
scsi_io_completion+0x6f/0x990
scsi_finish_command+0x188/0x280
scsi_complete+0xac/0x160
blk_complete_reqs+0x8e/0xb0
blk_done_softirq+0x1d/0x30
[...]
read to 0xffff8f0306ba7868 of 8 bytes by task 667002 on cpu 11:
raid1_read_request+0x497/0x1a10
raid1_make_request+0xdf/0x1950
md_handle_request+0x2c5/0x700
md_submit_bio+0x126/0x320
__submit_bio+0x2ec/0x3a0
submit_bio_noacct_nocheck+0x572/0x890
[...]
value changed: 0x0000000000000078 -> 0x00000000005fe448
Signed-off-by: Chen Cheng <chencheng@fnnas.com>
Link: https://patch.msgid.link/20260619044114.1208456-1-chencheng@fnnas.com
Signed-off-by: Yu Kuai <yukuai@fygo.io>
|
|
When a read is retried, raid1_read_request() may be called with a
pre-allocated r1_bio. If wait_read_barrier() fails for a REQ_NOWAIT
read, the bio is completed and the function returns immediately. In this
case the existing r1_bio is leaked.
This fixes a leak of pre-allocated r1_bio structures for retried reads.
Fixes: 5aa705039c4f ("md: raid1 add nowait support")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260611083514.754922-1-abd.masalkhi@gmail.com?part=1
Signed-off-by: Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
Link: https://patch.msgid.link/20260611101350.759154-1-abd.masalkhi@gmail.com
Signed-off-by: Yu Kuai <yukuai@fygo.io>
|
|
raid1 supports REQ_NOWAIT reads by avoiding waits in the barrier path
through wait_read_barrier(). However, a read can still block on a
WriteMostly device when the array uses a bitmap and there are
outstanding behind writes.
In that case raid1 unconditionally calls wait_behind_writes(), which
may sleep until all behind writes complete. As a result, a REQ_NOWAIT
read can block despite the caller explicitly requesting non-blocking
behavior.
This ensures that raid1 consistently honors REQ_NOWAIT reads across all
paths that may otherwise wait for behind writes.
Fixes: 5aa705039c4f ("md: raid1 add nowait support")
Signed-off-by: Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
Link: https://patch.msgid.link/20260611083514.754922-1-abd.masalkhi@gmail.com
Signed-off-by: Yu Kuai <yukuai@fygo.io>
|
|
llbitmap discard is useful even when no underlying member device supports
it. The discard still converts the llbitmap range to unwritten, so later
reads and recovery do not rely on stale parity for that range.
Let llbitmap discard bypass the raid5 lower discard support check. If lower
discard is not safe or not supported, complete the accounted clone after
md_account_bio() so the llbitmap conversion callbacks run without member
discard bios.
Link: https://patch.msgid.link/20260605072639.2434847-4-yukuai@kernel.org
Signed-off-by: Yu Kuai <yukuai@fygo.io>
|
|
Raid5 used to disable discard limits when devices_handle_discard_safely
was not set or when stacked member limits could not support a full-stripe
discard. That hides discard from userspace before raid5 can decide whether
a request can be handled safely.
Follow other virtual drivers and advertise a UINT_MAX discard limit for the
md device. Cache lower discard support in r5conf when setting queue limits,
and reject unsupported discard bios before queuing stripe work.
Link: https://patch.msgid.link/20260605072639.2434847-3-yukuai@kernel.org
Signed-off-by: Yu Kuai <yukuai@fygo.io>
|
|
Raid5 handles discard bios internally through make_discard_request() and
never passes them through md_account_bio(). As a result, discard IO is
missing the md-device iostat accounting that normal raid5 IO and discard
IO in other raid levels get from md_account_bio().
Before accounting the bio, trim the request to the full data stripes that
raid5 will actually discard. The first full stripe is the ceiling of the
bio start divided by data-stripe sectors, and the last full stripe is the
floor of the bio end divided by data-stripe sectors. Account that exact
MD logical full-stripe range, then restore the original iterator so bio
completion and iostat still cover the original request.
Link: https://patch.msgid.link/20260605072639.2434847-2-yukuai@kernel.org
Signed-off-by: Yu Kuai <yukuai@fygo.io>
|
|
raid1_write_request() increments rdev->nr_pending before checking the
badblocks and then immediately decrements it again when a device is
skipped. Move the increment until after the checks succeed so the
reference accounting is easier to follow.
Consolidate the failure paths so that each error label releases exactly
the resources acquired up to that point. err_dec_pending drops pending
references and frees the r1bio, while err_allow_barrier handles the
barrier release before returning.
When a REQ_ATOMIC write cannot be satisfied due to a badblock range,
complete the bio with BLK_STS_NOTSUPP rather than reporting an I/O
error, since the operation is unsupported rather than having failed
during I/O.
Rename max_write_sectors to max_sectors and remove the redundant local
copy.
Signed-off-by: Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
Link: https://patch.msgid.link/20260613182810.1317258-5-abd.masalkhi@gmail.com
Signed-off-by: Yu Kuai <yukuai@fygo.io>
|
|
raid10_make_request() acquires a writes_pending reference with
md_write_start() before calling raid10_handle_discard(). Several failure
paths in raid10_handle_discard() complete the bio and return without
releasing the corresponding reference, causing md_write_end() to be
skipped.
Call md_write_end() before returning from these failure paths to keep
writes_pending accounting balanced.
Additionally, discard split allocation failures can occur after
wait_barrier() succeeds. Those paths return without calling
allow_barrier(), leaking the associated barrier reference.
Release the barrier before returning from those paths.
Fixes: c9aa889b035f ("md: raid10 add nowait support")
Fixes: 4cf58d952909 ("md/raid10: Handle bio_split() errors")
Signed-off-by: Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
Link: https://patch.msgid.link/20260613182810.1317258-4-abd.masalkhi@gmail.com
Signed-off-by: Yu Kuai <yukuai@fygo.io>
|
|
raid10_make_request() acquires a writes_pending reference with
md_write_start() before dispatching write requests. Several failure
paths in raid10_write_request() complete the bio and return without
reaching the normal write completion path, causing the corresponding
md_write_end() to be skipped.
Make raid10_write_request() return a status indicating whether the write
request was successfully queued. This allows raid10_make_request() to
release the writes_pending reference with md_write_end() when a write
request fails.
Fixes: 4cf58d952909 ("md/raid10: Handle bio_split() errors")
Fixes: c9aa889b035f ("md: raid10 add nowait support")
Signed-off-by: Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
Link: https://patch.msgid.link/20260613182810.1317258-3-abd.masalkhi@gmail.com
Signed-off-by: Yu Kuai <yukuai@fygo.io>
|
|
raid1_make_request() acquires a writes_pending reference with
md_write_start() before calling raid1_write_request(). Several failure
paths in raid1_write_request() complete the bio and return without
reaching the normal write completion path, causing the corresponding
md_write_end() to be skipped.
Make raid1_write_request() return a status indicating whether the write
request was successfully queued. This allows raid1_make_request() to
call md_write_end() when raid1_write_request() fails.
Additionally, if wait_blocked_rdev() fails after wait_barrier()
succeeds, the associated barrier reference is not released.
Call allow_barrier() before returning from that path to keep the barrier
accounting balanced.
Fixes: b1a7ad8b5c4f ("md/raid1: Handle bio_split() errors")
Fixes: f2a38abf5f1c ("md/raid1: Atomic write support")
Fixes: 5aa705039c4f ("md: raid1 add nowait support")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260611083514.754922-1-abd.masalkhi@gmail.com?part=1
Closes: https://sashiko.dev/#/patchset/20260611132500.763528-1-abd.masalkhi@gmail.com?part=1
Signed-off-by: Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
Link: https://patch.msgid.link/20260613182810.1317258-2-abd.masalkhi@gmail.com
Signed-off-by: Yu Kuai <yukuai@fygo.io>
|
|
The correct path of the "hotmod" module parameter should be
/sys/module/ipmi_si/parameters/hotmod. Fix it.
Signed-off-by: Zenghui Yu <zenghui.yu@linux.dev>
Message-ID: <20260620122747.7902-1-zenghui.yu@linux.dev>
Signed-off-by: Corey Minyard <corey@minyard.net>
|
|
Refactor the control flow in id_mode_to_cifs_acl() to reduce nesting and
prevent error code overwriting.
Instead of wrapping the call to ops->set_acl() in a conditional block,
introduce early exits (goto id_mode_to_cifs_acl_exit) when build_sec_desc()
fails or ops->set_acl is NULL. This ensures that any actual error returned
by build_sec_desc() is not overwritten with -EOPNOTSUPP.
Signed-off-by: Ralph Boehme <slow@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply drivers:
- New EC driver providing battery info for Microsoft Surface RT
- New driver for battery charger in Samsung S2M PMICs
- Rework max17042 driver
- sysfs control for bd71828 auto input current limitation
All over:
- Use named fields for struct platform_device_id and of_device_id
entries
- Misc small cleanups and fixes"
* tag 'for-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (33 commits)
Documentation: ABI: sysfs-class-reboot-mode-reboot_modes: fix doc warnings
power: supply: charger-manager: fix refcount leak in is_full_charged()
power: supply: core: fix supplied_from allocations
power: supply: max17042_battery: Use modern PM ops to clear up warning
power: supply: add support for Samsung S2M series PMIC charger device
power: supply: Add support for Surface RT battery and charger
dt-bindings: embedded-controller: Document Surface RT EC
power: supply: bd71828: sysfs for auto input current limitation
power: supply: cpcap-charger: include missing <linux/property.h>
power: supply: cros_charge-control: Move MODULE_DEVICE_TABLE next to the table itself
power: supply: ab8500_fg: Fix typos in comments
power: supply: Use named initializers for arrays of i2c_device_data
power: supply: Remove unused jz4740-battery.h
power: reset: st-poweroff: Use of_device_get_match_data()
power: supply: bq257xx: Add fields for 'charging' and 'overvoltage' states
power: supply: bq257xx: Consistently use indirect get/set helpers
power: supply: bq257xx: Make the default current limit a per-chip attribute
power: supply: bq257xx: Fix VSYSMIN clamping logic
power: supply: cpcap-battery: Fix missing nvmem_device_put() causing reference leak
power: supply: max17042: fix OF node reference imbalance
...
|
