| Age | Commit message (Collapse) | Author |
|---|
|
The Lenovo IdeaPad Slim 5 16AKP10 (PCI SSID 17aa:38b6) uses the
Conexant SN6140 codec. The internal microphone is on pin 0x1a but
the BIOS configures it with pin default 0x95a60120, which includes
a jack detection bit that causes the kernel to treat it as an
unplugged external mic rather than a fixed internal mic.
Add a pin config quirk that overrides pin 0x1a to 0x95a60130,
setting the connectivity bits to indicate a fixed/always-connected
device. This allows the internal microphone to be correctly
identified and used.
Signed-off-by: Galen Hassen <rwekyes@gmail.com>
Link: https://patch.msgid.link/20260616173257.37373-1-rwekyes@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
snd_compr_task_new() allocates the driver task before validating the
returned DMA buffers and reserving file descriptors. When either of
those later steps fails, the core frees its task wrapper and DMA-buffer
references without calling the driver's task_free() callback. Any
driver resources allocated by task_create() are therefore leaked.
The dual-fd allocation path also jumps to cleanup without storing the
negative get_unused_fd_flags() result in retval. Since retval still
contains the successful task_create() return value, TASK_CREATE can
incorrectly report success although the task was discarded.
Preserve the fd allocation errors and call task_free() when failure
occurs after a successful task_create() callback.
Fixes: 04177158cf98 ("ALSA: compress_offload: introduce accel operation mode")
Fixes: 3d3f43fab4cf ("ALSA: compress_offload: improve file descriptors installation for dma-buf")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260615-alsa-compress-task-unwind-v1-1-39e8ad3ddb27@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
stm32f7_i2c_compute_timing() derives the I2C clock source period
(i2cclk) with DIV_ROUND_CLOSEST, which may round it up. When the
period is overestimated, all timings computed from it (SCLDEL,
SDADEL, SCLL, SCLH) come out shorter on the wire than calculated,
and the resulting bus rate can exceed the requested speed, violating
the I2C specification minimums for tLOW and tHIGH.
For example, with a 104.45 MHz clock source (e.g. PCLK1, the
reset-default I2C clock source on STM32MP1), i2cclk is rounded from
9.574 ns up to 10 ns. Requesting a 400 kHz fast mode bus with
72/27 ns rise/fall times and no analog/digital filters then produces
an actual bus rate of 415.6 kHz with tLOW = 1254 ns, violating both
the 400 kHz maximum rate and the 1300 ns tLOW minimum of the
specification.
Truncate the period instead, so that it can only be underestimated.
The error then falls on the safe side: the programmed timings come
out slightly longer than computed and the bus runs marginally below
the target rate (375.3 kHz in the example above) while meeting the
specification.
i2cbus is left rounded-to-closest: it is only used as the target of
the clk_error comparison and is never multiplied into the programmed
timings, so nearest rounding remains accurate there.
Fixes: aeb068c57214 ("i2c: i2c-stm32f7: add driver")
Signed-off-by: Guillermo Rodríguez <guille.rodriguez@gmail.com>
Cc: <stable@vger.kernel.org> # v4.14+
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260611104857.242153-1-guille.rodriguez@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
"Major changes:
- Recover from BPF arena page faults using a scratch page and add
ptep_try_set() for lockless empty-slot installs on x86 and arm64.
This allows BPF kfuncs to access arena pointers directly.
The 'arena_direct_access' stable branch was created for this work
and was pulled into sched-ext and bpf-next trees (Tejun Heo, Kumar
Kartikeya Dwivedi)
- Lift old restriction and support 6+ arguments in BPF programs and
kfuncs on x86 and arm64 (Yonghong Song, Puranjay Mohan)
Other features and fixes:
- Add 24-bit BTF vlen and reclaim unused bits in the BTF UAPI to ease
addition of new BTF kinds (Alan Maguire)
- Raise the maximum BPF call chain depth from 8 to 16 frames (Alexei
Starovoitov)
- Refactor object relationship tracking in the verifier and fix a
dynptr use-after-free bug (Amery Hung)
- Harden the signed program loader and reject exclusive maps as inner
maps (Daniel Borkmann)
- Replace the verifier min/max bounds fields with a circular number
(cnum) representation and improve 32->64 bit range refinements
(Eduard Zingerman)
- Introduce the arena library and runtime (libarena) with a buddy
allocator, rbtree and SPMC queue data structures, ASAN support and
a parallel test harness. Allow subprograms to return arena pointers
and switch to a BTF type-tag based __arena annotation (Emil
Tsalapatis)
- Cache build IDs in the sleepable stackmap path and avoid faultable
build ID reads under mm locks (Ihor Solodrai)
- Introduce the tracing_multi link to attach a single BPF program to
many kernel functions at once. Allow specifying the uprobe_multi
target via FD (Jiri Olsa)
- Extend the bpf_list family of kfuncs with bpf_list_add/del(), and
bpf_list_is_first/is_last/empty() (Kaitao Cheng)
- Extend the BPF syscall with common attributes support for
prog_load, btf_load and map_create (Leon Hwang)
- Wrap rhashtable as BPF map (Mykyta Yatsenko, Herbert Xu)
- Add sleepable support for tracepoint programs and fix deadlocks in
LRU map due to NMI reentry (Mykyta Yatsenko)
- Fix OOB access in bpf_flow_keys, fix nullness analysis of inner
arrays, enforce write checks for global subprograms (Nuoqi Gui)
- Report the maximum combined stack depth and print a breakdown of
instructions processed per subprogram (Paul Chaignon)
- Add an XDP load-balancer benchmark and arm64 JIT support for stack
arguments (Puranjay Mohan)
- Add kfuncs to traverse over wakeup_sources (Samuel Wu)
- Allow sleepable BPF programs to use LPM trie maps directly (Vlad
Poenaru)
- Many more fixes and cleanups across the verifier, BTF, sockmap,
devmap, bpffs, security hooks, s390/riscv/loongarch JITs,
rqspinlock, libbpf, bpftool, selftests"
* tag 'bpf-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (336 commits)
selftests/bpf: Work around llvm stack overflow in crypto progs
selftests/bpf: add test for bpf_msg_pop_data() overflow
bpf, sockmap: fix integer overflow in bpf_msg_pop_data() bounds check
sockmap: Fix use-after-free in udp_bpf_recvmsg()
bpf, sockmap: keep sk_msg copy state in sync
bpf, sockmap: Fix wrong rsge offset in bpf_msg_push_data()
bpf, sockmap: reject overflowing copy + len in bpf_msg_push_data()
selftsets/bpf: Retry map update on helper_fill_hashmap()
selftests/bpf: Add test for sleepable lsm_cgroup rejection
selftests/bpf: Add test to verify the fix for bpf_setsockopt() helper
bpf: Fix bpf_get/setsockopt to tos for ipv4-mapped ipv6 socket
selftests/bpf: Avoid static LLVM linking for cross builds
selftests/bpf: Use common CFLAGS for urandom_read
selftests/bpf: Initialize operation name before use
tools/bpf: build: Append extra cflags
libbpf: Initialize CFLAGS before including Makefile.include
bpftool: Append extra host flags
bpftool: Avoid adding EXTRA_CFLAGS to HOST_CFLAGS
bpftool: Pass host flags to bootstrap libbpf
selftests/bpf: correct CONFIG_PPC64 macro name in comment
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Work on removing rtnl_lock protection throughout the stack
continues. In this chapter:
- don't use rtnl_lock for IPv6 multicast routing configuration
- don't take rtnl_lock in ethtool for modern drivers
- prepare Qdisc dump callbacks for rtnl_lock removal
- Support dumping just ifindex + name of all interfaces, under RCU.
It's a common operation for Netlink CLI tools (when translating
names to ifindexes) and previously required full rtnl_lock.
- Support dumping qdiscs and page pools for a specific netdev. Even
tho user space wants a dump of all netdevs, most of the time, the
OOO programming model results in repeating the dump for each
netdev. Which, in absence of a cache, leads to a O(n^2) behavior.
- Flush nexthops once on multi-nexthop removal (e.g. when device goes
down), another O(n^2) -> O(n) improvement.
- Rehash locally generated traffic to a different nexthop on
retransmit timeout.
- Honor oif when choosing nexthop for locally generated IPv6 traffic.
- Convert TCP Auth Option to crypto library, and drop non-RFC algos.
- Increase subflow limits in MPTCP to 64 and endpoint limit to 256.
- Support MPTCP signaling of IPv6 address + port (ADD_ADDR). We need
to selectively skip reporting of the standard TCP Timestamp option,
because they won't fit into the header space together (12 + 30 >
40).
- Support using bridge neighbor suppression, Duplicate Address
Detection, Gratuitous ARP and unsolicited NA forwarding - in EVPN
deployments, e.g. VXLAN fabrics (IPv4 and IPv6).
- Improve link state reporting for upper netdevs (e.g. macvlan) over
tunnel devices (again, mostly for EVPN deployments).
- Support binding GENEVE tunnels to a local address.
- Speed up UDP tunnel destruction (remove one synchronize_rcu()).
- Support exponential field encoding in multicast (IGMPv3 and MLDv2).
- Support attaching PSP crypto offload to containers (veth, netkit).
- Add a new IPSec Netlink message XFRM_MSG_MIGRATE_STATE that allows
migrating individual IPsec SAs independently of their policies.
The existing XFRM_MSG_MIGRATE is tightly coupled to policy+SA
migration, lacks SPI for unique SA identification, and cannot
express reqid changes or migrate Transport mode selectors.
The new interface identifies the SA via SPI and mark, supports
reqid changes, address family changes, encap removal, and uses an
atomic create+install flow under x->lock to prevent SN/IV reuse
during AEAD SA migration.
- Implement GRO/GSO support for PPPoE.
- Convert sockopt callbacks in a number of protocols to iov_iter.
Cross-tree stuff:
- Remove support for Crypto TFM cloning (unblocked after the TCP Auth
Option rework). This feature regressed performance for all crypto
API users, since it changed crypto transformation objects into
reference-counted objects.
- Add FCrypt-PCBC implementation to rxrpc and remove it from the
global crypto API as obsolete and insecure.
Wireless:
- Major rework of station bandwidth handling, fixing issues with
lower capability than AP.
- Cleanups for EMLSR spec issues (drafts differed).
- More Neighbor Awareness Networking (Wi-Fi Aware) work (multicast,
schedule improvements, multi-station etc.)
- Some Ultra High Reliability (UHR) / IEEE 802.11bn (D1.4) work
(e.g. non-primary channel access, UHR DBE support).
- Fine Timing Measurement ranging (i.e. distance measurement) APIs.
Netfilter:
- Use per-rule hash initval in nf_conncount. This avoids unnecessary
lock contention with short keys (e.g. conntrack zones) in different
namespaces.
- Various safety improvements, both in packet parsing and object
lifetimes. Notably add refcounts to conntrack timeout policy.
Deletions:
- Remove TLS + sockmap integration. TLS wants to pin user pages to
avoid a copy, and sockmap wants to write to the input stream. More
work on this integration is clearly needed, and we can't find any
users (original author admitted that they never deployed it).
- Remove support for TLS offload with TCP Offload Engine (the far
more common opportunistic offload is retained). The locking looks
unfixable (driver sleeps under TCP spin locks) and people from the
vendor that added this are AWOL.
- Remove more ATM code, trying to leave behind only what PPPoATM
needs, AAL5 and br2684 with permanent circuits.
- Remove AppleTalk. Let it join hamradio in our out of tree protocol
graveyard, I mean, repository.
- Disable 32-bit x_tables compatibility (32bit binaries on 64bit
kernel) interface in user namespaces. To be deleted completely,
soon.
- Remove 5/10 MHz support from cfg80211/mac80211.
Drivers:
- Software:
- Support DEVMEM/DMABUF Tx over NETMEM_TX_NO_DMA devices (netkit)
- bonding: add knob to strictly follow 802.3ad for link state
- New drivers:
- Alibaba Elastic Ethernet Adaptor (cloud vNIC).
- NXP NETC switch within i.MX94.
- DPLL:
- Add operational state to pins (implement in zl3073x).
- Add generic DPLL type, for daisy-chaining DPLLs (implement in ice).
- Ethernet high-speed NICs:
- Huawei (hinic3):
- enhance tc flow offload support with queue selection,
tunnels
- nVidia/Mellanox:
- avoid over-copying payload to the skb's linear part (up to
60% win for LRO on slow CPUs like ARM64 V2)
- expose more per-queue stats over the standard API
- support additional, unprivileged PFs in the DPU
configuration
- support Socket Direct (multi-PF) with switchdev offloads
- add a pool / frag allocator for DMA mapped buffers for
control objects, save memory on systems with 64kB page size
- take advantage of the ability to dynamically change RSS
table size, even when table is configured by the user
- increase the max RSS table size for even traffic
distribution
- Ethernet NICs:
- Marvell/Aquantia:
- AQC113 PTP support
- Realtek USB (r8152):
- support 10Gbit Link Speeds and Energy-Efficient Ethernet
(EEE)
- support firmware loaded (for RTL8157/RTL8159)
- support for the RTL8159
- Intel (ixgbe):
- support Energy-Efficient Ethernet (EEE) on E610 devices
- Ethernet switches:
- Airoha:
- support multiple netdevs on a single GDM block / port
- Marvell (mv88e6xxx):
- support SERDES of mv88e6321
- Microchip (ksz8/9):
- rework the driver callbacks to remove one indirection layer
- Motorcomm (yt921x):
- support port rate policing
- support TBF qdisc offload
- support ACL/flower offload
- nVidia/Mellanox:
- expose per-PG rx_discards
- Realtek:
- rtl8365mb: bridge offloading and VLAN support
- Ethernet PHYs:
- Airoha:
- support Airoha AN8801R Gigabit PHYs.
- Micrel:
- implement 3 low-loss cable tunables
- Realtek:
- support MDI swapping for RTL8226-CG
- support MDIO for RTL931x
- Qualcomm:
- at803x: Rx and Tx clock management for IPQ5018 PHY
- Motorcomm:
- support YT8522 100M RMII PHY
- set drive strength in YT8531s RGMII
- TI:
- dp83822: add optional external PHY clock
- Bluetooth:
- hci_sync: add support for HCI_LE_Set_Host_Feature [v2]
- SMP: use AES-CMAC library API
- Intel:
- support Product level reset
- support smart trigger dump
- Mediatek:
- add event filter to filter specific event
- Realtek:
- fix RTL8761B/BU broken LE extended scan
- WiFi:
- Broadcom (b43):
- new support for a 11n device
- MediaTek (mt76):
- support mt7927
- mt792x: broken usb transport detection
- mt7921: regulatory improvements
- Qualcomm (ath9k):
- GPIO interface improvements
- Qualcomm (ath12k):
- WDS support
- replace dynamic memory allocation in WMI Rx path
- thermal throttling/cooling device support
- 6 GHz incumbent interference detection
- channel 177 in 5 GHz
- Realtek (rt89):
- RTL8922AU support
- USB 3 mode switch for performance
- better monitor radiotap support
- RTL8922DE preparations"
* tag 'net-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1778 commits)
ipv4: fib_rule: Move fib4_rules_exit() to ->exit().
net: serialize netif_running() check in enqueue_to_backlog()
net: skmsg: preserve sg.copy across SG transforms
appletalk: move the protocol out of tree
appletalk: stop storing per-interface state in struct net_device
selftests/bpf: test that TLS crypto is rejected on a sockmap socket
selftests/bpf: drop the unused kTLS program from test_sockmap
selftests/bpf: remove sockmap + ktls tests
tls: remove dead sockmap (psock) handling from the SW path
tls: reject the combination of TLS and sockmap
atm: remove orphaned uAPI for deleted drivers, protocols and SVCs
atm: remove unused ATM PHY operations
atm: remove the unused pre_send and send_bh device operations
atm: remove the unused change_qos device operation
atm: remove SVC socket support and the signaling daemon interface
atm: remove the local ATM (NSAP) address registry
atm: remove dead SONET PHY ioctls
atm: remove the unused send_oam / push_oam callbacks
atm: remove AAL3/4 transport support
net: dsa: sja1105: fix lastused timestamp in flower stats
...
|
|
|
|
|
|
The ACPI GPIO OperationRegion handler receives pin offsets as a
64-bit address. Previously, this value could be assigned to a pin index
without validation, potentially causing out-of-bounds access if
the ACPI table provides an invalid offset.
This patch explicitly checks that the 64-bit address is less than
agpio->pin_table_length before using it, returning AE_BAD_PARAMETER
if the check fails. Additionally, it makes the length calculation
overflow-safe and ensures proper unsigned types for loop counters.
This corrects the commit message from v5 to accurately reflect the
underlying issue, removing references to truncation or wrap-around,
which do not occur in ACPICA.
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Marco Scardovi <scardracs@disroot.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://patch.msgid.link/20260610154204.110379-3-scardracs@disroot.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Ensure that GPIO pin resource arrays are safely bounded before accessing
indices. Add explicit bounds checking in acpi_request_own_gpiod(),
acpi_gpio_irq_is_wake(), and acpi_gpiochip_alloc_event() to prevent
out-of-bounds array reads if the ACPI namespace provides malformed or empty
pin tables.
This change addresses potential safety issues arising from
inconsistent or invalid ACPI pin tables. It does not alter functional
behavior in well-formed tables.
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Marco Scardovi <scardracs@disroot.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://patch.msgid.link/20260610154204.110379-2-scardracs@disroot.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Try to map more chunks in the same metadata on-disk block for
more efficient IO performance.
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Ensure all inode free callbacks have completed before
destroying the inode slab cache.
Fixes: 5ef3208e3be5 ("erofs: introduce the page cache share feature")
Reviewed-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Update the overview section to better reflect EROFS's design philosophy
as an immutable image filesystem, update the feature highlights with
recent capabilities, and remove outdated items.
The following detailed sections will be revised later since the overview
section is the most visible part of our documentation. Outdated or
ambiguous information could mislead new users and potential adopters.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
- Use the shorthand `si` to replace the overly long `sharedinode`;
- Introduce erofs_warn() and get rid of barely-used _erofs_printk();
- Get rid of the variable `hash`;
- Simplify error paths.
Reviewed-by: Hongbo Li <lihongbo22@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
The SMB2 open lookup is rooted at the share with LOOKUP_BENEATH, but the
create/mkdir/hardlink sink is not: ksmbd_vfs_kern_path_create() builds an
absolute path with convert_to_unix_name() and resolves it from AT_FDCWD
via start_creating_path(), so a ".." component is walked from the real
filesystem root and escapes the export.
An authenticated client races a missing path component so the rooted open
lookup returns -ENOENT (taking the create branch) while the same component
is present (a directory) when the create walk runs; the create then
resolves ".." out of the share.
Root the create walk at the share like the lookup and rename paths already
are: resolve the parent with vfs_path_parent_lookup(..., LOOKUP_BENEATH,
&share_conf->vfs_path) and create the final component with
start_creating_noperm(). convert_to_unix_name() then has no callers and is
removed.
Fixes: 265fd1991c1d ("ksmbd: use LOOKUP_BENEATH to prevent the out of share access")
Cc: stable@vger.kernel.org
Signed-off-by: Davide Ornaghi <d.ornaghi97@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
SET_SPARSE, SET_ZERO_DATA and SET_COMPRESSION operate on an open SMB
handle but call VFS xattr, fallocate or fileattr helpers with the current
ksmbd worker credentials. Those helpers can revalidate inode permissions,
ownership and LSM policy independently of the SMB handle access mask.
Run each operation with the credentials captured in the target file when
the handle was opened. Keep credential handling local to these single-file
FSCTLs rather than applying session credentials to the complete IOCTL
handler, which also contains handle-less and multi-handle operations.
Cc: stable@vger.kernel.org
Reported-by: Musaab Khan <musaab.khan@protonmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Alternate data streams are stored as xattrs. Unlike regular file I/O,
their read and write paths therefore call VFS xattr helpers which recheck
inode permissions and LSM policy using the current task credentials.
Run ADS I/O with the credentials captured when the SMB handle was opened.
Cc: stable@vger.kernel.org
Reported-by: Musaab Khan <musaab.khan@protonmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
FSCTL_DUPLICATE_EXTENTS_TO_FILE passes the source file directly to
vfs_clone_file_range() or vfs_copy_file_range() without checking the SMB
access mask granted to the source handle. A handle opened with attribute
access can consequently be used to copy file contents into an
attacker-readable destination.
Require FILE_READ_DATA on the source handle before either VFS operation,
matching other ksmbd data-copy paths.
Cc: stable@vger.kernel.org
Reported-by: Musaab Khan <musaab.khan@protonmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
SMB2 SET_INFO handlers call path-based VFS helpers after checking the
access mask granted to the SMB handle. Those helpers perform their owner,
inode permission and LSM checks using the current ksmbd worker credentials.
Run the complete SET_INFO dispatch with the credentials captured when the
handle was opened. This also removes the separate security information
credential setup and keeps all SET_INFO classes under one credential scope.
Direct override_creds() is used because it can nest with the request
credential overrides already used by rename and link helpers.
Cc: stable@vger.kernel.org
Reported-by: Musaab Khan <musaab.khan@protonmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Delete-on-close can be completed by deferred or durable handle teardown,
where no request work is available. Both the base-file unlink and the ADS
xattr removal consequently run with the ksmbd worker credentials and can
bypass filesystem permission checks.
Run both operations with the credentials captured in struct file when the
handle was opened. This preserves the authenticated user's fsuid, fsgid,
supplementary groups and capability restrictions at final close.
Cc: stable@vger.kernel.org
Reported-by: Musaab Khan <musaab.khan@protonmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
smb2_query_dir() stores a pointer to its stack-allocated private data in
the ksmbd_file readdir_data. Concurrent QUERY_DIRECTORY requests using the
same file handle can overwrite this pointer while an iterate_dir() callback
is still using it, resulting in a stack use-after-free.
Add a per-file mutex and hold it while accessing the shared directory
enumeration state. The lock covers scan restart, dot entry state,
readdir_data setup and iteration, and response construction. This prevents
another request from replacing readdir_data.private before the current
request has finished using it and also serializes the shared file position.
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-30527
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The FSCTL_DUPLICATE_EXTENTS_TO_FILE arm of smb2_ioctl() overwrites the
destination file's data via vfs_clone_file_range() with neither the
share-level KSMBD_TREE_CONN_FLAG_WRITABLE check nor a per-handle
fp->daccess check that the other write-bearing arms carry. A client can
overwrite destination data on a read-only share, or from a handle opened
with only FILE_WRITE_ATTRIBUTES (which still yields an FMODE_WRITE filp).
FILE_WRITE_ATTRIBUTES-only destination handle overwrote the file's data via
the clone. Add both checks, matching the FSCTL_SET_SPARSE permission fix;
require FILE_WRITE_DATA since this writes data.
Cc: stable@vger.kernel.org
Signed-off-by: Gil Portnoy <dddhkts1@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
find_file_posix_info() in smb2_query_info() returns file metadata (owner
uid, group gid, mode, inode, size, allocation size, hard-link count and all
four timestamps) but performs no per-handle access check. Every sibling
query handler gates on the handle's granted access first --
get_file_basic_info(), get_file_all_info(), get_file_network_open_info()
and get_file_attribute_tag_info() all reject a handle lacking
FILE_READ_ATTRIBUTES_LE with -EACCES. The POSIX handler is gated only by
the connection-scoped tcon->posix_extensions flag, which is not a
per-handle authorization, so a handle opened with only FILE_WRITE_DATA is
correctly denied FileBasicInformation yet is allowed the strict-superset
POSIX info. Mirror the FILE_READ_ATTRIBUTES_LE gate the sibling info
handlers already use.
Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Signed-off-by: Gil Portnoy <dddhkts1@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
smb2_check_user_session() takes a shortcut for any operation that is not
the first in a COMPOUND request: it reuses work->sess (the session bound by
the first operation) and validates only the SessionId, then returns
"valid". It never re-checks work->sess->state == SMB2_SESSION_VALID, and a
SessionId of 0xFFFFFFFFFFFFFFFF (ULLONG_MAX, the MS-SMB2 related-operation
value) skips even the id comparison. The standalone path
(ksmbd_session_lookup_all() plus the SESSION_SETUP state machine) does
enforce the VALID state; the compound branch bypasses all of it.
A SESSION_SETUP carrying only an NTLM Type-1 (NtLmNegotiate) blob publishes
a fresh SMB2_SESSION_IN_PROGRESS session whose sess->user is still NULL
(->user is assigned later, by ntlm_authenticate()). Used as operation 1 of
a COMPOUND with operation 2 = TREE_CONNECT (related, SessionId=ULLONG_MAX,
\\host\IPC$), the tree-connect then runs on that IN_PROGRESS session and
reaches ksmbd_ipc_tree_connect_request(), which dereferences
user_name(sess->user) with sess->user == NULL (transport_ipc.c:687/701/704)
-> remote NULL-pointer dereference and a kernel Oops that wedges the ksmbd
worker for all clients.
Reject any non-first compound operation that lands on a session which is
not SMB2_SESSION_VALID, mirroring the validity the standalone lookup path
enforces. SESSION_SETUP itself legitimately runs on an IN_PROGRESS session,
but it is never carried as a non-first compound operation, so multi-leg
authentication is unaffected by this check.
Fixes: 5005bcb42191 ("ksmbd: validate session id and tree id in the compound request")
Cc: stable@vger.kernel.org
Signed-off-by: Gil Portnoy <dddhkts1@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Handle SMB2_READFLAG_REQUEST_COMPRESSED for non-RDMA reads.
Flatten the response iov, emit chained or unchained LZ77 transforms when
compression is beneficial, and retain the generated buffer until the work
item is released.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Parse the SMB 3.1.1 compression capabilities context and negotiate LZ77
with optional chained Pattern_V1 support.
Advertise compression on tree connections and decode compressed requests
before normal SMB dispatch.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Advertise LZ77 and Pattern_V1 with chained transform support in the
SMB 3.1.1 compression negotiate context. Validate the server's returned
algorithm list and flags, then retain the negotiated capabilities for a
future compressed transform receive implementation.
This patch only negotiates capabilities. It does not request compressed
READ responses or add a compressed transform receive path.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Implement common validation, compression and decompression for SMB2
compression transforms.
Support unchained LZ77 and chained NONE, LZ77 and Pattern_V1 payloads.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Move the LZ77 codec in cifs.ko to smb/common/ so both the SMB
client and ksmbd can use it.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The FILE_LINK_INFORMATION arm of smb2_set_info_file() calls
smb2_create_link() with no per-handle fp->daccess check. On the
ReplaceIfExists path smb2_create_link() unlinks an existing file at the
target name (ksmbd_vfs_remove_file) and creates a hardlink
(ksmbd_vfs_link); neither helper checks daccess. A handle opened with
FILE_READ_DATA only (no FILE_DELETE, no FILE_WRITE_DATA) can therefore
delete an arbitrary file in the share and plant a hardlink over its name.
The sibling delete/move arms in the same switch already gate:
FILE_RENAME_INFORMATION and FILE_DISPOSITION_INFORMATION both require
FILE_DELETE_LE; FILE_FULL_EA_INFORMATION requires FILE_WRITE_EA_LE. Gate
the link arm the same way as its closest analogue (rename), since it
mutates the namespace and, on replace, deletes an existing entry.
This is a sibling of commit cc57232cae23 ("ksmbd: fix FSCTL permission
bypass by adding a permission check for FSCTL_SET_SPARSE").
Cc: stable@vger.kernel.org
Signed-off-by: Gil Portnoy <dddhkts1@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
FSCTL_SET_ZERO_DATA in smb2_ioctl() destroys file data via
ksmbd_vfs_zero_data() -> vfs_fallocate(PUNCH_HOLE/ZERO_RANGE) after
checking only the share-level KSMBD_TREE_CONN_FLAG_WRITABLE, with no
per-handle access check. A handle opened with only FILE_WRITE_ATTRIBUTES
still yields an FMODE_WRITE filp (FILE_WRITE_ATTRIBUTES is part of
FILE_WRITE_DESIRE_ACCESS_LE, so smb2_create_open_flags() opens it
O_WRONLY), so the vfs_fallocate FMODE_WRITE check does not stop it; only
the missing fp->daccess gate would. Reproduced on mainline 7.1-rc7 with
KASAN by an authenticated SMB client: a FILE_WRITE_ATTRIBUTES-only handle
zeroed 4096 bytes of file data it had no FILE_WRITE_DATA right to
(6/6; a FILE_READ_DATA-only handle was correctly denied).
This is the unfixed sibling of commit cc57232cae23 ("ksmbd: fix FSCTL
permission bypass by adding a permission check for FSCTL_SET_SPARSE").
Because SET_ZERO_DATA writes data (not an attribute), require
FILE_WRITE_DATA.
Cc: stable@vger.kernel.org
Signed-off-by: Gil Portnoy <dddhkts1@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
commit cc57232cae23 ("ksmbd: fix FSCTL permission bypass by adding a
permission check for FSCTL_SET_SPARSE") added a fp->daccess gate to
fsctl_set_sparse and noted that "similar handle-level checks exist in other
functions but are missing here." The SMB2 SET_INFO SECURITY arm is one of
the missing ones, and the most security-relevant: smb2_set_info_sec() calls
set_info_sec() with no per-handle access check.
set_info_sec() (fs/smb/server/smbacl.c) re-permissions the file: it
rewrites owner/group/mode via notify_change(), rewrites the POSIX ACL via
set_posix_acl(), and on KSMBD_SHARE_FLAG_ACL_XATTR shares removes and
rewrites the Windows security descriptor via ksmbd_vfs_set_sd_xattr().
Every other persistent-mutation arm of the sibling handler
smb2_set_info_file() checks fp->daccess first (FILE_WRITE_DATA /
FILE_DELETE / FILE_WRITE_EA / FILE_WRITE_ATTRIBUTES); the SECURITY arm —
which mutates the access control itself — is the only one with no gate.
A client can therefore open a handle with FILE_WRITE_ATTRIBUTES only (no
FILE_WRITE_DAC / FILE_WRITE_OWNER) and use SMB2_SET_INFO with InfoType
SMB2_O_INFO_SECURITY to rewrite the file's DACL and owner, granting itself
access the handle's daccess never carried. Unlike the FSCTL data arms this
is a metadata/xattr operation, so there is no FMODE_WRITE VFS backstop —
the missing fp->daccess check is the entire gate.
Setting a security descriptor is the WRITE_DAC / WRITE_OWNER operation, so
require at least one of those on the handle before re-permissioning the
file. -EACCES is mapped to STATUS_ACCESS_DENIED by smb2_set_info().
Cc: stable@vger.kernel.org
Signed-off-by: Gil Portnoy <dddhkts1@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Commit f580d27e8928 ("ksmbd: fix use-after-free of a deferred file_lock on
double SMB2_CANCEL") made smb2_cancel() skip a work whose state is
KSMBD_WORK_CANCELLED, so its cancel_fn cannot be fired a second time. But
KSMBD_WORK has three states (ACTIVE, CANCELLED, CLOSED), and the same
freeing producer path is reached for CLOSED too:
SMB2_CLOSE on the locking handle -> set_close_state_blocked_works() sets
the deferred work's state to KSMBD_WORK_CLOSED and wakes the smb2_lock()
worker. The worker takes the non-ACTIVE early-exit, locks_free_lock()s
the file_lock and, because the state is not KSMBD_WORK_CANCELLED, takes
the STATUS_RANGE_NOT_LOCKED branch with "goto out2" -- which, like the
cancelled branch, skips release_async_work(). The work stays on
conn->async_requests with a live cancel_fn = smb2_remove_blocked_lock
pointing at the freed file_lock.
A subsequent SMB2_CANCEL for the same AsyncId then passes the
KSMBD_WORK_CANCELLED-only guard (its state is KSMBD_WORK_CLOSED), so
smb2_cancel() fires cancel_fn again over the freed file_lock -- the same
use-after-free fixed, via SMB2_CLOSE instead of a first SMB2_CANCEL:
BUG: KASAN: slab-use-after-free in __locks_delete_block
__locks_delete_block
locks_delete_block
ksmbd_vfs_posix_lock_unblock
smb2_remove_blocked_lock
smb2_cancel <- 2nd SMB2_CANCEL fires cancel_fn
handle_ksmbd_work
Allocated by ...: locks_alloc_lock <- smb2_lock
Freed by ...: locks_free_lock <- smb2_lock (non-ACTIVE early-exit)
... cache file_lock_cache of size 192
Reproduced on mainline 7.1-rc7 (which already contains f580d27e8928) with
KASAN by an authenticated SMB client; the double-SMB2_CANCEL control is
silent on that kernel, so the splat is attributable to the CLOSE trigger.
Only an ACTIVE deferred work may have its cancel_fn fired: both terminal
states (CANCELLED and CLOSED) reach the smb2_lock() early-exit that frees
the file_lock and skips release_async_work(). Guard on KSMBD_WORK_ACTIVE
so any non-active work is skipped.
Fixes: f580d27e8928 ("ksmbd: fix use-after-free of a deferred file_lock on double SMB2_CANCEL")
Cc: stable@vger.kernel.org
Signed-off-by: Gil Portnoy <dddhkts1@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
A small piece of code in fs/smb/server/smb_common.c depends on
CONFIG_SMB_INSECURE_SERVER, which has never been defined in the
mainline kernel, but was present in old out-of-tree versions of ksmbd.
Remove this dead code.
Discovered while searching for CONFIG_* symbols referenced in code but
not defined in any Kconfig file.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Before this patch, we got the wrong file size:
- client: touch /mnt/file
- client: smbinfo setcompression default /mnt/file
- client: dd if=/dev/zero of=/mnt/file bs=1 count=1000
- client: smbinfo filecompressioninfo /mnt/file
Compressed File Size: 4096
Compression Format: 2 (LZNT1)
After this patch, we get the correct file size:
- client: smbinfo filecompressioninfo /mnt/file
Compressed File Size: 1000
Compression Format: 2 (LZNT1)
Note that the actual compressed file size must be got by other methods.
For Btrfs, use the following command to get actual compressed file size:
- server: compsize /export/file
Processed 1 file, 0 regular extents (0 refs), 1 inline.
Type Perc Disk Usage Uncompressed Referenced
TOTAL 4% 47B 1000B 1000B
zlib 4% 47B 1000B 1000B
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
I have added `filecompressioninfo` subcommand to `smbinfo`
in cifs-utils.git.
Example:
1. client: smbinfo setcompression lznt1 /mnt/file
2. client: smbinfo filecompressioninfo /mnt/file
Compressed File Size: 104857600
Compression Format: 2 (LZNT1)
Compression Unit Shift: 0
Chunk Shift: 0
Cluster Shift: 0
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Example:
1. client: smbinfo setcompression no /mnt/file
2. client: smbinfo getcompression /mnt/file
Compression: 0 (NONE)
3. client: smbinfo setcompression lznt1 /mnt/file
4. client: smbinfo getcompression /mnt/file
Compression: 2 (LZNT1)
5. client: smbinfo setcompression default /mnt/file
6. client: smbinfo getcompression /mnt/file
Compression: 2 (LZNT1)
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Example:
1. server: chattr +c /export/file
2. client: smbinfo getcompression /mnt/file
Compression: 2 (LZNT1)
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Example:
1. server: chattr +c /export/file
2. client: lsattr /mnt/file
--------c------------- /mnt/file
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
These definitions will also be used by ksmbd, move them into
common header file.
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Rename the following places:
- FSCTL_COPYCHUNK -> FSCTL_SRV_COPYCHUNK
- FSCTL_COPYCHUNK_WRITE -> FSCTL_SRV_COPYCHUNK_WRITE
- FSCTL_REQUEST_RESUME_KEY -> FSCTL_SRV_REQUEST_RESUME_KEY
server/smbfsctl.h contains the following additional definitions compared to
common/smbfsctl.h:
- IO_REPARSE_TAG_LX_SYMLINK_LE
- IO_REPARSE_TAG_AF_UNIX_LE
- IO_REPARSE_TAG_LX_FIFO_LE
- IO_REPARSE_TAG_LX_CHR_LE
- IO_REPARSE_TAG_LX_BLK_LE
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
ksmbd_vfs_path_lookup() enforces LOOKUP_BENEATH to restrict path
resolution within the share root. When a crafted path attempts to
escape the share boundary using parent-directory components ('..'),
vfs_path_parent_lookup() detects this and immediately fails,
returning -EXDEV.
However, a bug exists in __ksmbd_vfs_kern_path() under caseless mode.
The function fails to intercept the -EXDEV error and erroneously
falls through to the caseless retry logic, which is intended only
for genuinely missing files. During this retry process, the path
is reconstructed, leading to an unintended LOOKUP_BENEATH bypass
that allows write-capable users to create zero-length files or
directories outside the exported share.
Fix this by ensuring that the execution only proceeds to the caseless
lookup retry when the error is specifically -ENOENT. Any other errors,
such as -EXDEV from a path traversal attempt, must be returned immediately.
Cc: stable@vger.kernel.org
Reported-by: Y s65 <yu4ys@outlook.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When a blocking byte-range lock request is deferred in the
FILE_LOCK_DEFERRED path, ksmbd registers the asynchronous work into
the connection's async_requests list via setup_async_work(). The cancel
callback smb2_remove_blocked_lock() holds a reference to the flock.
If the lock waiter is subsequently woken up but the work state is no
longer KSMBD_WORK_ACTIVE (e.g., due to a concurrent cancellation), the
cleanup path calls locks_free_lock(flock) without dequeuing the work from
the async_requests list. Concurrently, smb2_cancel() walks the list
under conn->request_lock and invokes the cancel callback, which then
dereferences the already freed 'flock'. This leads to a slab-use-after-free
inside __wake_up_common.
Fix this by restructuring the cleanup logic after the worker returns
from ksmbd_vfs_posix_lock_wait(). Move list_del(&smb_lock->llist) and
release_async_work(work) to the top of the cleanup block. This guarantees
that the async work is completely dequeued and serialized under
conn->request_lock before locks_free_lock(flock) is called, rendering
the flock unreachable for any concurrent smb2_cancel().
Cc: stable@vger.kernel.org
Signed-off-by: Davide Ornaghi <d.ornaghi97@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
same_client_has_lease() returns an opinfo pointer from ci->m_op_list
after dropping ci->m_lock without taking a reference.
smb_grant_oplock() then dereferences that pointer in copy_lease() and
when checking breaking_cnt. A concurrent close can remove the old lease
from ci->m_op_list and drop the last reference before the caller uses
the returned pointer, leading to a use-after-free.
Take a reference when same_client_has_lease() selects an existing lease,
drop any previous match while scanning, and release the returned
reference in smb_grant_oplock() after copying the lease state.
Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The permission-check ACE walk in smb_check_perm_dacl() validates the ACE
header size and caps sid.num_subauth at SID_MAX_SUB_AUTHORITIES, but it
never checks that ace->size is actually large enough to contain
num_subauth sub-authorities before compare_sids() dereferences them.
CIFS_SID_BASE_SIZE covers the SID header up to but excluding the
sub_auth[] array, and offsetof(struct smb_ace, sid) is the ACE header,
so the existing guards only guarantee the 8-byte SID base, i.e. zero
sub-authorities. compare_sids() then reads ace->sid.sub_auth[i] for
i < min(local_sid->num_subauth, ace->sid.num_subauth). The local
comparison SIDs (sid_everyone, sid_unix_NFS_mode, and the id_to_sid()
result) always have at least one sub-authority, and an attacker controls
the ACE revision and authority bytes (which lie within the in-bounds SID
base), so they can match one of those SIDs and force the sub_auth read.
A crafted ACE with size == 16 and num_subauth >= 1 placed at the tail of
the security descriptor therefore causes a heap out-of-bounds read of up
to SID_MAX_SUB_AUTHORITIES * sizeof(__le32) bytes past the pntsd
allocation. The security descriptor is loaded by ksmbd_vfs_get_sd_xattr()
into a buffer sized exactly to the on-disk data (kzalloc(sd_size) in
ndr_decode_v4_ntacl()), so the read lands past the allocation. The
malformed descriptor can be stored verbatim via SMB2_SET_INFO (the DACL
is not normalised before being written to the security.NTACL xattr) and
the read fires on a subsequent SMB2_CREATE access check, making this
reachable by an authenticated client on a share that uses ACL xattrs.
Add the missing num_subauth-versus-ace_size check, mirroring the
identical guards already present in the sibling parsers parse_dacl() and
smb_inherit_dacl().
Fixes: d07b26f39246 ("ksmbd: require minimum ACE size in smb_check_perm_dacl()")
Cc: stable@vger.kernel.org
Signed-off-by: Hem Parekh <hemparekh1596@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Both CoreI2C and the hardened versions of it on mpfs and pic64gx have a
reset pin. For the former, usually this is wired to a common fabric
reset not managed by software and for the latter two the platform
firmware takes them out of reset on first-party boards (or those using
modified versions of the vendor firmware), but not all boards may take
this approach. Permit providing a reset in devicetree for Linux, or
other devicetree-consuming software, to use.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260506-bronchial-kitten-e3697fb66ba7@spud
|
|
A `Debug` impl is for debugging and is normally not used, and therefore
should ideally not be code-generated unless used. However, Rust has no way
of knowing if a dependent crate is going to use the trait impl or not, so
unless it is marked as `#[inline]`, it will be code-generated in the
defining crate (as it is not generic).
Mark the impl generated by bitfield macro `#[inline]`, so they do not stay
in the binary unless used.
This reduces nova-core.o .text by 17% (from 151922 bytes to 125676 bytes).
Signed-off-by: Gary Guo <gary@garyguo.net>
Fixes: b7b8b4ccdad4 ("rust: extract `bitfield!` macro from `register!`")
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260611190555.2298991-1-gary@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Various names for Qualcomm as a company are used in user-visible config
options: QCOM, Qualcomm and Qualcomm Technologies. Switch to unified
"Qualcomm" so it will be easier for users to identify the options when
for example running menuconfig.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260423173550.92317-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The event ISR reads SR1 and, when an error flag (ARLO/AF/BERR) is set,
calls loongson2_i2c_isr_error() which clears the offending flag, issues
STOP for the AF case, records msg->result, masks every CR2 interrupt
enable and completes the waiter. The handler then returns IRQ_NONE,
declaring to the IRQ core that the device did not interrupt.
That report is wrong. The device did interrupt and the handler fully
serviced it. Because the IRQ is requested with IRQF_SHARED, the genirq
spurious-IRQ tracker counts each error as unhandled. A bus that emits
sporadic NACKs, arbitration losses or bus errors will therefore march
toward the spurious-IRQ threshold and the line can end up disabled,
wedging the controller.
Return IRQ_HANDLED on this path. The other IRQ_NONE site, taken when
neither an event nor an error bit is set, remains correct.
Fixes: 6d1b0785f6d5 ("i2c: ls2x-v2: Add driver for Loongson-2K0300 I2C controller")
Signed-off-by: David Carlier <devnexen@gmail.com>
Assisted-by: Codex:GPT-5.5
Reviewed-by: Binbin Zhou <zhoubinbin@loongson.cn>
Tested-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260506154015.94815-1-devnexen@gmail.com
|
|
syzbot reported use-after-free of net->ipv4.rules_ops. [0]
It can be reproduced with these commands:
while true; do
ip netns add ns1
ip -n ns1 link set dev lo up
ip -n ns1 address add 192.0.2.1/24 dev lo
ip -n ns1 link add name dummy1 up type dummy
ip -n ns1 address add 198.51.100.1/24 dev dummy1
ip -n ns1 rule add ipproto tcp sport 12345 table 12345
ip -n ns1 fou add port 5555 ipproto 47 local 192.0.2.1 peer 198.51.100.2 peer_port 54321
ip netns del ns1
done
The cited commit moved fib4_rules_exit() earlier to ->exit_rtnl(),
but the kernel socket destroyed in ->exit() could eventually reach
__fib_lookup().
I left fib4_rules_exit() in ->exit_rtnl() because fib4_rule_delete()
calls fib_unmerge(), which requires RTNL.
However, when ->delete() is called, ->configure() has already been
called, thus fib_unmerge() in ->delete() has no effect.
Let's remove fib_unmerge() in fib4_rule_delete() and move
fib4_rules_exit() to ->exit().
Many thanks to Ido Schimmel for providing the nice repro very quickly.
Note that we can make fib_rules_ops.delete() return void once
net-next opens.
[0]:
BUG: KASAN: slab-use-after-free in fib_rules_lookup+0x15e/0xeb0 net/core/fib_rules.c:321
Read of size 8 at addr ffff88804ec4c680 by task kworker/u8:21/12641
CPU: 0 UID: 0 PID: 12641 Comm: kworker/u8:21 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/09/2026
Workqueue: netns cleanup_net
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
print_address_description+0x55/0x1e0 mm/kasan/report.c:378
print_report+0x58/0x70 mm/kasan/report.c:482
kasan_report+0x117/0x150 mm/kasan/report.c:595
fib_rules_lookup+0x15e/0xeb0 net/core/fib_rules.c:321
__fib_lookup+0x106/0x210 net/ipv4/fib_rules.c:96
ip_route_output_key_hash_rcu+0x294/0x2720 net/ipv4/route.c:2811
ip_route_output_key_hash+0x18d/0x2a0 net/ipv4/route.c:2702
__ip_route_output_key include/net/route.h:169 [inline]
ip_route_output_flow+0x2a/0x150 net/ipv4/route.c:2929
ip4_datagram_release_cb+0x89d/0xbe0 net/ipv4/datagram.c:118
release_sock+0x206/0x260 net/core/sock.c:3861
inet_shutdown+0x2b1/0x390 net/ipv4/af_inet.c:950
udp_tunnel_sock_release+0x6d/0x80 net/ipv4/udp_tunnel_core.c:197
fou_release net/ipv4/fou_core.c:562 [inline]
fou_exit_net+0x17d/0x1f0 net/ipv4/fou_core.c:1230
ops_exit_list net/core/net_namespace.c:199 [inline]
ops_undo_list+0x43d/0x8d0 net/core/net_namespace.c:252
cleanup_net+0x572/0x810 net/core/net_namespace.c:702
process_one_work kernel/workqueue.c:3314 [inline]
process_scheduled_works+0xa8e/0x14e0 kernel/workqueue.c:3397
worker_thread+0xa47/0xfb0 kernel/workqueue.c:3478
kthread+0x389/0x470 kernel/kthread.c:436
ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
Fixes: 759923cf03b0 ("ipv4: fib: Convert fib_net_exit_batch() to ->exit_rtnl().")
Reported-by: syzbot+965506b59a2de0b6905c@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/6a315824.b0403584.28d0ff.0000.GAE@google.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260616191359.4142661-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Syzbot reported a KASAN slab-use-after-free in fib_rules_lookup().
The root cause is a race condition where packets can escape the backlog
flushing during device unregistration (e.g., during netns exit).
Commit e9e4dd3267d0 ("net: do not process device backlog during unregistration")
introduced a lockless netif_running() check in enqueue_to_backlog() to
prevent queuing packets to an unregistering device.
However, this creates a TOCTOU race window.
A lockless transmitter (like veth_xmit) can pass
the check before dev_close() clears IFF_UP. If the transmitter is then
delayed, flush_all_backlogs() can run and finish before the transmitter
grabs the backlog lock and queues the packet. The packet then escapes
the flush and triggers UAF later when processed.
Fix this by moving the netif_running() check inside the backlog lock.
This serializes the check with the flush work (which also grabs the lock).
We then either queue the packet before the flush runs (so it gets flushed),
or check netif_running() after the flush/close completes (so it gets dropped).
Fixes: e9e4dd3267d0 ("net: do not process device backlog during unregistration")
Reported-by: syzbot+965506b59a2de0b6905c@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6a315824.b0403584.28d0ff.0000.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Julian Anastasov <ja@ssi.bg>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260616141317.407791-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
