| Age | Commit message (Collapse) | Author |
|---|
|
Commit 0e24d17bd966 ("tcp: implement RFC 7323 window retraction
receiver requirements") removed the special FIN case that
was added in commit 1e3bb184e941 ("tcp: re-enable acceptance of
FIN packets when RWIN is 0").
If a peer sends a segment containing data and a FIN flag before
it learns about our window retraction and has a buggy TCP stack,
it might place the FIN one byte beyond what it thinks is the
right edge of the window (i.e., max_window_edge + 1).
The data portion (end_seq - th->fin) will end exactly at max_window_edge.
In this case, we will drop the packet if our receive queue is not empty,
even though the data was sent within the window we previously allowed.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Simon Baatz <gmbnomis@gmail.com>
Link: https://patch.msgid.link/20260608151452.706822-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'dpll-ice-add-generic-dpll-type-and-full-tx-reference-clock-control-for-e825'
Grzegorz Nitka says:
====================
dpll/ice: Add generic DPLL type and full TX reference clock control for E825
NOTE: This series is intentionally submitted on net-next (not
intel-wired-lan) as early feedback of DPLL subsystem changes is
welcomed. In the past possible approaches were discussed in [1].
This series adds TX reference clock support for E825 devices and exposes
TX clock selection and synchronization status via the Linux DPLL
subsystem.
Here is the high-level connection diagram for E825 device:
+------------------------------------------------------------------+
| |
| +-----------------------------+ |
| | | |
| | MAC | |
| |+------------+-----+ | |
| ||RX/1588 |PHC|tspll<----\ | |
+---+----+ ||MUX +---+-^---| | | |
| E | RX >---------------------> | >--\ | | |
| T | | /----------------> | >-\| | | |
| H |----+ | |+---------+----^---+ || | | |
| 1 | TX <----|----------------+TX MUX < OCXO | || | | |
| |PLL | | || |--------| || | | |
+---+----+ | /----+ <-ext_ref<-||-|----|------ext_ref
| E | RX >----/ | || |--------+ || | | |
| T | | | || < SyncE | || | | |
| H |----+ | |+-----------^------+ || | | |
| 2 | TX <----------------/ | | /------||-/ | |
| |PLL | +------------|-|------||------+ |
+---+----+ /--/ | || |
| . | RX >--- | | || |
| . | | +----------|----|------||--+ |
| . |----+ | +-^-+--^+ || | |
| | TX <--- | |EEC|PPS| || | |
| |PLL | | +-------+ || | |
+---+----+ | | <-CLK0/| | |
| E | RX >--- | | DPLL | | | |
| T | | | | <-CLK1-/ | |
| H |----+ | | | | |
| X | TX <--- | | <---SMA---< |
| |PLL | | | | | |
+---+----+ | | <---GPS---< |
| | | | | |
| | | <---...---< |
| | | | | |
| | +-------+ | |
| | External timing module | |
| +--------------------------+ |
+------------------------------------------------------------------+
E825 hardware contains a dedicated TX clock domain with per-port source
selection behavior that is distinct from PPS handling and from board-level
EEC distribution. TX reference clock selection is device-wide, shared
across ports, and mediated by firmware as part of link bring-up. As a
result, TX clock selection intent may differ from effective hardware
configuration, and software must verify outcome after link-up.
To support this, the series extends the DPLL core and the ice driver
incrementally. The series also introduces DPLL_TYPE_GENERIC as a broad
UAPI class for DPLL instances outside PPS/EEC categories. The intent is
to keep type naming reusable and scalable across different ASIC
topologies while preserving functional discoverability via
driver/device context and pin topology.
This follows netdev discussion guidance that UAPI type naming should avoid
location-specific or vendor-specific taxonomy, because such labels do not
scale across different ASIC designs. The function of a given DPLL instance
is already discoverable from driver/device context and pin topology, and
does not require an additional narrow type identifier in UAPI.
At the same time, a separate DPLL object is still needed for E825 TX clock
control/reporting semantics. Using DPLL_TYPE_GENERIC provides a reusable
class for devices outside PPS/EEC without overfitting UAPI naming to one
topology.
The relevant discussion is in [2].
Series content
- add a new generic DPLL type for devices outside PPS/EEC classes;
- relax DPLL pin registration rules for firmware-described shared pins
and extend pin notifications with a source identifier;
- allow dynamic state control of SyncE reference pins where hardware
supports it;
- add CPI infrastructure for PHY-side TX clock control on E825C;
- introduce a TX-clock DPLL device and TX reference clock pins
(EXT_EREF0 and SYNCE) in the ice driver;
- extend the Restart Auto-Negotiation command to carry a TX reference
clock index;
- implement hardware-backed TX reference clock switching, post-link
verification, and TX synchronization reporting.
TXCLK pins report TX reference topology only. Actual synchronization
success is reported via DPLL lock status, updated after hardware
verification: external TX references report LOCKED, while the internal
ENET/TXCO source reports UNLOCKED.
This provides reliable TX reference selection and observability on E825
devices using standard DPLL interfaces, without conflating user intent
with effective hardware behavior.
[1] https://lore.kernel.org/netdev/20250905160333.715c34ac@kernel.org/
[2] https://lore.kernel.org/netdev/20260402230626.3826719-1-grzegorz.nitka@intel.com/
====================
Link: https://patch.msgid.link/20260607183045.1213735-1-grzegorz.nitka@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Build on the previously introduced TXC DPLL framework and implement
full TX reference clock control and hardware-backed synchronization
status reporting for E825 devices.
E825 firmware may accept or override TX reference clock requests based
on device-wide routing constraints and link conditions. Because the
final selection becomes visible only after a link-up event, the driver
splits the observation into two complementary signals:
- TXCLK pin state reflects the requested TX reference clock
(pf->ptp.port.tx_clk_req). After a link-up, the value is reconciled
against the SERDES reference selector by
ice_txclk_update_and_notify(); if firmware or auto-negotiation
selected a different clock, tx_clk_req is overwritten so that pin
state converges to the actual hardware selection.
- TXC DPLL lock status reflects hardware synchronization:
* LOCKED when an external TX reference is in use
* UNLOCKED when falling back to ENET/TXCO, or when a requested
external reference has not (yet) been accepted by hardware.
Userspace observing only pin state therefore sees user intent, while
lock status is the authoritative indicator of whether the requested
clock is actually selected and synchronizing. This matches the DPLL
subsystem model where pin state describes topology and device lock
status describes signal quality.
TX reference selection topology:
- External references (SYNCE, EREF0) are represented as TXCLK pins
- The internal ENET/TXCO clock has no pin representation; when
selected, all TXCLK pins are reported DISCONNECTED
With this change, TX reference clocks on E825 devices can be reliably
selected, observed via standard DPLL interfaces, and monitored for
effective synchronization through TXC DPLL lock status.
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Link: https://patch.msgid.link/20260607183045.1213735-14-grzegorz.nitka@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend the Restart Auto-Negotiation (AN) AdminQ command with a new
parameter allowing software to specify the Tx reference clock index to
be used during link restart.
This patch:
- adds REFCLK field definitions to ice_aqc_restart_an
- updates ice_aq_set_link_restart_an() to take a new refclk parameter
and properly encode it into the command
- keeps legacy behavior by passing REFCLK_NOCHANGE where appropriate
This prepares the driver for configurations requiring dynamic selection
of the Tx reference clock as part of the AN flow.
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Link: https://patch.msgid.link/20260607183045.1213735-13-grzegorz.nitka@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add full CPI (Converged PHY Interface) command handling required for
E825C devices. The CPI interface allows the driver to interact with
PHY-side control logic through the LM/PHY command registers, including
enabling/disabling/selection of PHY reference clock.
This patch introduces:
- a new CPI subsystem (ice_cpi.c / ice_cpi.h) implementing the CPI
request/acknowledge state machine, including REQ/ACK protocol,
command execution, and response handling
- helper functions for reading/writing PHY registers over Sideband
Queue
- CPI command execution API (ice_cpi_exec) and a helper for enabling or
disabling Tx reference clocks (CPI 0xF1 opcode 'Config PHY clocking')
- assurance of CPI transaction serialization into the CPI core.
CPI REQ/ACK is a multi-step handshake and must be executed
atomically per PHY. Centralize the lock in ice_cpi_exec() and
use adapter-scoped per-PHY mutexes, which match the hardware sharing
model across PFs.
- addition of the non-posted write opcode (wr_np) to SBQ
- Makefile integration to build CPI support together with the PTP stack
This provides the infrastructure necessary to support PHY-side
configuration flows on E825C and is required for advanced link control
and Tx reference clock management.
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Link: https://patch.msgid.link/20260607183045.1213735-12-grzegorz.nitka@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
E825 devices provide a dedicated TX clock (TXC) domain which may be
driven by multiple reference clock sources, including external board
references and port-derived SyncE. To support future TX clock control
and observability through the Linux DPLL subsystem, introduce a
separate TXC DPLL device (of DPLL_TYPE_GENERIC) and a framework for
representing TX reference clock inputs.
This change adds a new internal DPLL pin type (TXCLK) and registers
TX reference clock pins for E825-based devices:
- EXT_EREF0: a board-level external electrical reference
- SYNCE: a port-derived SyncE reference described via firmware nodes
The TXC DPLL device is created and managed alongside the existing
PPS and EEC DPLL instances. TXCLK pins are registered directly or
deferred via a notifier when backed by fwnode-described pins.
A per-pin attribute encodes the TX reference source associated with
each TXCLK pin.
At this stage, TXCLK pin state callbacks and TXC DPLL lock status
reporting are implemented as placeholders. Pin state getters always
return DISCONNECTED, and the TXC DPLL is initialized in the UNLOCKED
state. No hardware configuration or TX reference switching is
performed yet.
This patch establishes the structural groundwork required for
hardware-backed TX reference selection, verification, and
synchronization status reporting, which will be implemented in
subsequent patches.
Also signal dpll_init from the fwnode pin init error path so any
notifier worker already blocked on it can drain, avoiding a
flush_workqueue() deadlock during teardown.
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Link: https://patch.msgid.link/20260607183045.1213735-11-grzegorz.nitka@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pins registered with an fwnode may have .state_on_dpll_set implemented
without advertising DPLL_PIN_CAPABILITIES_STATE_CAN_CHANGE upfront.
Requiring the bit for fwnode pins ties firmware description to driver
implementation details unnecessarily.
Relax the capability check in dpll_pin_state_set() and
dpll_pin_on_pin_state_set(): when a pin has an associated fwnode, bypass
the capability gate and let the ops layer decide, returning -EOPNOTSUPP
if .state_on_dpll_set is absent. Non-fwnode pins retain the original
strict behavior.
This is used later in the series by the SyncE_Ref output pin, which
relies on the fwnode path for state control.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Link: https://patch.msgid.link/20260607183045.1213735-10-grzegorz.nitka@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend the DPLL pin notification API to include a source identifier
indicating where the notification originates. This allows notifier
consumers to distinguish between notifications coming from
an associated DPLL instance, a parent pin, or the pin itself.
A new field, src_clock_id, is added to struct dpll_pin_notifier_info
and is passed through all pin-related notification paths. Callers of
dpll_pin_notify() are updated to provide a meaningful source identifier
based on their context:
- pin registration/unregistration uses the DPLL's clock_id,
- pin-on-pin operations use the parent pin's clock_id,
- pin changes use the pin's own clock_id.
As introduced in the commit ("dpll: allow registering FW-identified pin
with a different DPLL"), it is possible to share the same physical pin
via firmware description (fwnode) with DPLL objects from different
kernel modules. This means that a given pin can be registered multiple
times.
Driver such as ICE (E825 devices) rely on this mechanism when listening
for the event where a shared-fwnode pin appears, while avoiding reacting
to events triggered by their own registration logic.
This change only extends the notification metadata and does not alter
existing semantics for drivers that do not use the new field.
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Link: https://patch.msgid.link/20260607183045.1213735-9-grzegorz.nitka@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
__dpll_pin_register() emits dpll_pin_create_ntf() internally, but
__dpll_pin_unregister() left the matching delete to its callers. The
counts then diverge on dpll_pin_on_pin_register() rollback and on
dpll_pin_on_pin_unregister(), leaking stale notifications.
Emit dpll_pin_delete_ntf() inside __dpll_pin_unregister() and drop the
now-redundant call in dpll_pin_unregister().
Fixes: 9431063ad323 ("dpll: core: Add DPLL framework base functions")
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20260607183045.1213735-8-grzegorz.nitka@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
__dpll_pin_unregister() wiped the global sync-pair state on every
(dpll, ops, priv, cookie) tuple removed from a pin. When a pin is
registered multiple times and only one registration is being torn
down, this dropped sync-pair pairings still in use by the surviving
registrations.
Move dpll_pin_ref_sync_pair_del() inside the xa_empty(&pin->dpll_refs)
branch so it only runs when the last registration is gone, alongside
clearing the DPLL_REGISTERED mark.
Fixes: 58256a26bfb3 ("dpll: add reference sync get/set")
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20260607183045.1213735-7-grzegorz.nitka@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dpll_pin_on_pin_register() emits a creation notification for every
parent->dpll_refs entry, but dpll_pin_on_pin_unregister() emitted only
one deletion notification outside the loop. When a pin is registered
against multiple parent dplls, userspace sees N creates but a single
delete and leaks per-dpll state.
Move dpll_pin_delete_ntf() into the loop and call it before
__dpll_pin_unregister() so the DPLL_REGISTERED mark is still set when
dpll_pin_available() is consulted.
Fixes: 9d71b54b65b1 ("dpll: netlink: Add DPLL framework base functions")
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20260607183045.1213735-6-grzegorz.nitka@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The rollback path in dpll_pin_on_pin_register() called
__dpll_pin_unregister() before dpll_pin_delete_ntf(). When the
unregister dropped the pin's last DPLL reference it cleared the
DPLL_REGISTERED mark in dpll_pin_xa, so the subsequent
dpll_pin_event_send() failed dpll_pin_available() and aborted with
-ENODEV. As a result userspace was never notified of the rollback
deletion and remained out of sync with the kernel.
Send the delete notification first, matching the order used by
dpll_pin_unregister() and dpll_pin_on_pin_unregister().
Fixes: 9d71b54b65b1 ("dpll: netlink: Add DPLL framework base functions")
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Link: https://patch.msgid.link/20260607183045.1213735-5-grzegorz.nitka@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Neither parent->dpll_refs nor pin->dpll_refs on its own is a correct
iteration target at unregister time:
- pin->dpll_refs includes DPLLs the child was registered against
via a different parent or directly; blind unregister WARNs on
the cookie miss in dpll_xa_ref_pin_del().
- parent->dpll_refs reflects the parent's current attachments, not
those at child-register time. Another driver may have (un)reg'd
the parent against additional DPLLs in the meantime, so we miss
registrations that exist and visit DPLLs that have none.
Walk pin->dpll_refs and use dpll_pin_registration_find() to filter
to entries whose cookie is this parent. Symmetric with
dpll_pin_on_pin_register(), correct under any subsequent change to
parent->dpll_refs.
Fixes: 9431063ad323 ("dpll: core: Add DPLL framework base functions")
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Link: https://patch.msgid.link/20260607183045.1213735-4-grzegorz.nitka@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Relax the (module, clock_id) equality requirement when registering a
pin identified by firmware (pin->fwnode). Some platforms associate a
FW-described pin with a DPLL instance that differs from the pin's
(module, clock_id) tuple. For such pins, permit registration without
requiring the strict match. Non-FW pins still require equality.
Keep netlink pin module reporting/filtering safe for this relaxed
registration model by caching the module name in the pin object at
allocation time and using the cached string in netlink paths.
This avoids dereferencing pin->module after provider module teardown.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Link: https://patch.msgid.link/20260607183045.1213735-3-grzegorz.nitka@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add DPLL_TYPE_GENERIC to represent DPLL devices which do not fit the
existing PPS or EEC classes.
The UAPI type is intentionally generic. During netdev discussion,
maintainers pointed out that introducing identifiers tied to a specific
placement or single design does not scale across ASICs and vendors.
The role of a DPLL is already inferable from the spawning driver,
bus device, and pin topology, without encoding additional
purpose-specific taxonomy in the type name.
Using a generic type keeps the UAPI extensible and avoids premature
naming that may become incorrect as new hardware topologies are
exposed through the DPLL subsystem.
Expose the new type through UAPI and netlink specification as "generic".
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Link: https://patch.msgid.link/20260607183045.1213735-2-grzegorz.nitka@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2026-06-12
1) Replace the open-coded manual cleanup in xfrm_add_policy() error
path with xfrm_policy_destroy() for consistency with
xfrm_policy_construct().
From Deepanshu Kartikey.
2) Limit XFRMA_TFCPAD to a sensible maximum (max IP length, 64k) since
u32 is excessive for traffic flow confidentiality padding.
From David Ahern.
3) Add a new netlink message XFRM_MSG_MIGRATE_STATE that
allows migrating individual IPsec SAs independently of
their policies. The existing XFRM_MSG_MIGRATE is tightly coupled
to policy+SA migration, lacks SPI for unique SA identification,
and cannot express reqid changes or migrate Transport mode
selectors. The new interface identifies the SA via SPI and mark,
supports reqid changes, address family changes, encap removal,
and uses an atomic create+install flow under x->lock to prevent
SN/IV reuse during AEAD SA migration.
From Antony Antony.
* tag 'ipsec-next-2026-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: add documentation for XFRM_MSG_MIGRATE_STATE
xfrm: restrict netlink attributes for XFRM_MSG_MIGRATE_STATE
xfrm: add XFRM_MSG_MIGRATE_STATE for single SA migration
xfrm: make xfrm_dev_state_add xuo parameter const
xfrm: extract address family and selector validation helpers
xfrm: refactor XFRMA_MTIMER_THRESH validation into a helper
xfrm: move encap and xuo into struct xfrm_migrate
xfrm: add error messages to state migration
xfrm: add state synchronization after migration
xfrm: check family before comparing addresses in migrate
xfrm: split xfrm_state_migrate into create and install functions
xfrm: rename reqid in xfrm_migrate
xfrm: fix NAT-related field inheritance in SA migration
xfrm: allow migration from UDP encapsulated to non-encapsulated ESP
xfrm: add extack to xfrm_init_state
xfrm: remove redundant assignments
xfrm: Reject excessive values for XFRMA_TFCPAD
xfrm: cleanup error path in xfrm_add_policy()
====================
Link: https://patch.msgid.link/20260612074725.1760473-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 1a8d4c6ecb4c81261bcdf13556abd4a958eca202.
Commit 1a8d4c6ecb4c ("PCI/MSI: Unmap MSI-X region on error") added an
iounmap(dev->msix_base) on the error path of msix_capability_init() to
release the MSI-X region when msix_setup_interrupts() fails.
When msix_setup_interrupts() fails, the call chain is:
msix_setup_interrupts()
-> __msix_setup_interrupts()
struct pci_dev *dev __free(free_msi_irqs) = __dev;
...
return ret; // __free cleanup fires on error
The __free(free_msi_irqs) cleanup calls pci_free_msi_irqs(), which
already handles the unmap:
void pci_free_msi_irqs(struct pci_dev *dev)
{
pci_msi_teardown_msi_irqs(dev);
if (dev->msix_base) {
iounmap(dev->msix_base); // already unmapped here
dev->msix_base = NULL; // and set to NULL
}
}
So dev->msix_base is unmapped and set to NULL before
msix_setup_interrupts() returns to msix_capability_init(). The
"goto out_unmap" introduced by commit 1a8d4c6ecb4c ("PCI/MSI: Unmap
MSI-X region on error") then calls iounmap() a second time on a NULL
pointer.
This was reproduced on Intel Emerald Rapids (192 CPUs) while
running tools/testing/selftests/kexec/test_kexec_jump.sh:
WARNING: CPU#44 at iounmap+0x2a/0xe0
RIP: 0010:iounmap+0x2a/0xe0
RDI: 0000000000000000
Call Trace:
msix_capability_init+0x317/0x3f0
__pci_enable_msix_range+0x21d/0x2c0
pci_alloc_irq_vectors_affinity+0xa9/0x130
nvme_setup_io_queues+0x2a8/0x420 [nvme]
nvme_reset_work+0x151/0x340 [nvme]
...
RDI=0 confirms iounmap() is called with NULL.
Restore the original "goto out_disable" and leave the unmap to the
existing __free(free_msi_irqs) cleanup.
Fixes: 1a8d4c6ecb4c ("PCI/MSI: Unmap MSI-X region on error")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Yuanhe Shu <xiangzao@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://lore.kernel.org/all/20260610194406.GA380991@bhelgaas/
Link: https://patch.msgid.link/20260611025901.1105209-1-xiangzao@linux.alibaba.com
Closes: https://lore.kernel.org/all/4fc6208d-513b-4f41-a13a-4a0829ab50ad@roeck-us.net/
|
|
Georgia has agreed to help maintaining apparmor.
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
t7xx_port_ctrl_tx() clones each skb fragment before passing it to the
port transmit path. The clone is used immediately to set cloned->len, so
an skb_clone() failure results in a NULL pointer dereference.
Check the clone before using it. If previous fragments were already
queued, preserve the driver's existing partial-write behavior by
returning the number of bytes submitted so far.
Fixes: 36bd28c1cb0d ("wwan: core: Support slicing in port TX flow of WWAN subsystem")
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://patch.msgid.link/20260612035613.1192486-1-ruoyuw560@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Raf Dickson says:
====================
vsock: consolidate acceptq accounting into core helpers
These patches follow up on commit c05fa14db43e
("vsock/vmci: fix sk_ack_backlog leak on failed handshake")
by consolidating sk_acceptq_added() and sk_acceptq_removed() into
the core vsock helpers so transports cannot forget them.
Link: https://lore.kernel.org/netdev/20260611021317.69362-1-rafdog35@gmail.com/
====================
Link: https://patch.msgid.link/20260612045216.105796-1-rafdog35@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Callers of vsock_remove_pending() must also call sk_acceptq_removed()
to keep sk_ack_backlog consistent. Move the call into
vsock_remove_pending() itself to make it automatic and prevent future
callers from forgetting it.
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Raf Dickson <rafdog35@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260612045216.105796-5-rafdog35@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
virtio and hyperv call sk_acceptq_added() immediately before
vsock_enqueue_accept(). Move the call into vsock_enqueue_accept()
itself so callers cannot forget it and the accounting is consistent.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Raf Dickson <rafdog35@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260612045216.105796-4-rafdog35@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move sk_acceptq_added() into vsock_add_pending() so callers cannot
forget it. vmci is the only transport using the pending list and
is updated accordingly.
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Raf Dickson <rafdog35@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260612045216.105796-3-rafdog35@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add vsock_pending_to_accept() to move a socket directly from the
pending list to the accept queue in a single operation, avoiding
the sock_put/sock_hold dance and the sk_acceptq_removed()/
sk_acceptq_added() pair that would otherwise be needed when
calling vsock_remove_pending() followed by vsock_enqueue_accept().
Use it in vmci_transport_recv_connecting_server() where a completed
handshake transitions the socket from pending to accept queue.
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Raf Dickson <rafdog35@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260612045216.105796-2-rafdog35@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace the open-coded backlog check with sk_acceptq_is_full().
The helper uses > instead of >=, which is the correct comparison
per commit 64a146513f8f ("[NET]: Revert incorrect accept queue
backlog changes."), and adds READ_ONCE() for proper memory ordering.
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Raf Dickson <rafdog35@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Link: https://patch.msgid.link/20260612045842.122207-1-rafdog35@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
WED_MON_AMSDU_ENG_CNT point to different entry by 'base+n*offset' mode,
correct the wed amsdu entry number in wed_amsdu_show().
Fixes: 3f3de094e8342 ("net: ethernet: mtk_wed: debugfs: add WED 3.0 debugfs entries")
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Link: https://patch.msgid.link/20260612064501.203058-1-guanwentao@uniontech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Florian Westphal says:
====================
netdevsim: add fake FT/CLS_FLOWER offload
v2: fix up error reporting via extack
shellcheck cleanups
sort config toggles
1) Enable nf_tables offload control plane testing in netdevsim. Tag
existing offload fn to allow error injection for testing rollback and abort
logic.
2) Add nft_offload selftest to exercise the control plane and error
unwind via fault injection.
====================
Link: https://patch.msgid.link/20260612092209.11966-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
... "phony", because its not testing offloads, it tests the control
plane code. Also test error unwind via fault injection framework.
For a proper test, real hardware would be required given we'd have
check if 'previously handed off to hardware' offload commands are
properly removed again on failure or rule flush.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20260612092209.11966-3-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The actual 'offload' is phony, all commands are ignored: this is only
useful to test control plane code.
Tag the existing callback to permit error injection to test rollback/abort
code in nf_tables. This is also for fuzzers - the fault injection
framework allows probabilistic error insertion.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20260612092209.11966-2-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In airoha_ppe_flush_sram_entries(), the outer "err" variable was never
updated when the inner loop variable shadowed it, causing the function
to always return 0 even when airoha_ppe_foe_commit_sram_entry() fails.
Drop the outer "err" variable and return directly on error, propagating
the error code from airoha_ppe_foe_commit_sram_entry() correctly.
Fixes: 620d7b91aadb ("net: airoha: ppe: Flush PPE SRAM table during PPE setup")
Link: https://lore.kernel.org/netdev/6a2b40e4.4dd82583.3a5c46.e52f@mx.google.com/
Signed-off-by: Wayen.Yan <win847@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/6a2bd37a.4034e349.1b41bb.1caf@mx.google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
I switch to colyli@fygo.io as my current email address.
Signed-off-by: Coly Li <colyli@fygo.io>
Link: https://patch.msgid.link/20260613150458.682707-1-colyli@fygo.io
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull debugobjects fix from Ingo Molnar:
- Fix potential debugobjects deadlock on PREEMPT_RT kernels (Waiman
Long)
* tag 'core-urgent-2026-06-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
debugobjects: Don't call fill_pool() in early boot hardirq context
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"The biggest news here is that this is my last pull request as I2C
maintainer after 13.5 years. Starting with the 7.2 cycle, Andi Shyti
is taking over who helped me greatly maintaining the host drivers for
a while now. Thank you, Andi, and good luck with the subsystem. I'll
be around for help, of course.
Technically, there are two patches which might be a tad large for this
late cycle, but most of them is explaining comments, so I think they
are suitable.
- MAINTAINERS:
- hand over I2C maintainership to Andi
- minor updates
- rust: fix I2cAdapter refcount double increment
- imx: keep clock and pinctrl states consistent in runtime PM
- imx-lpi2c: fix DMA resource leaks on PIO fallback
- qcom-cci: fix NULL pointer dereference on remove
- riic: fix reset refcount leak on resume_noirq error path
- stm32f7: account for analog filter in timing computation
- tegra:
- fix suspend/resume handling in NOIRQ phase
- update Tegra410 I2C timings to match hardware specs"
* tag 'i2c-for-7.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
dt-bindings: i2c: mux-gpio: name correct maintainer
MAINTAINERS: hand over I2C to Andi Shyti
i2c: imx-lpi2c: fix resource leaks switching to devm_dma_request_chan()
MAINTAINERS: i2c: designware: Remove inactive reviewer
i2c: tegra: Fix NOIRQ suspend/resume
i2c: tegra: Update Tegra410 I2C timing parameters
i2c: qcom-cci: Fix NULL pointer dereference in cci_remove()
i2c: stm32f7: fix timing computation ignoring i2c-analog-filter
i2c: imx: fix clock and pinctrl state inconsistency in runtime PM
i2c: riic: fix refcount leak in riic_i2c_resume_noirq()
rust: i2c: fix I2cAdapter refcounts double increment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/daniel.lezcano/linux into timers/clocksource
Pull clocksource/driver updates from Daniel Lezcano:
- Remove the sifive,fine-ctr-bits property bindings because it is a
redundant information (Nick Hu)
- Remove the TCIU8 interrupt bindings on Renesas because it should not
be described as the documentation marked reserved and fix the
conditional reset line for the RZ/{T2H,N2H} (Cosmin Tanislav)
- Add the StarFive JHB100 clint DT bindings compatible string (Ley
Foon Tan)
- Extend schema condition for interrupts to cover D1 compatible
variant an add the D1 hstimer support (Michal Piekos)
- Update the ARM architected timer support to handle the ACPI GTDT v3
format and the EL2 virtual timer, enabling Linux to use the most
appropriate timer when running with VHE, while also fixing several
Device Trees to accurately reflect the underlying hardware (Marc
Zyngier)
- Cleanup and add the clocksource and the clockevent in the TI DM
timer (Markus Schneider-Pargmann)
- Add the multiple watchdogs support in the tegra186 and
tegra234. Dedicate one as a kernel watchdog (Kartik Rajput)
- Add the NXP clocksource selection for the scheduler in the Kconfig
(Enric Balletbo i Serra)
Link: https://lore.kernel.org/all/1e55e8d6-8024-4f17-8620-ab3385465d76@oss.qualcomm.com
|
|
In do_cpu_nanosleep(), posix_cpu_timer_create() takes a pid reference
via get_pid() and stores it in timer.it.cpu.pid. If the subsequent
posix_cpu_timer_set() call fails, the function returns immediately
without calling posix_cpu_timer_del() to release the pid reference,
causing a leak.
Fix it by calling posix_cpu_timer_del() before the unlock-and-return
on the error path, consistent with the other exit paths in the same
function.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: WenTao Liang <vulab@iscas.ac.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260611161738.97043-1-vulab@iscas.ac.cn
|
|
The /proc/interrupt handling rework dropped a 's' in the thermal event
printout, which breaks the thermal test in the Intel LKVS suite.
Bring the important letter back.
Fixes: 2b57c69917ee ("x86/irq: Make irqstats array based")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Closes: https://lore.kernel.org/oe-lkp/202606121325.97b29701-lkp@intel.com
|
|
Teddy reported that a XEN HVM has a long boot delay, which was bisected to
the recent enhancements to the negative motion detection. It turned out
that the jiffies clocksource is used in early boot before it is registered,
which leaves the max_delta_raw field at zero. That causes the read out to
be clamped to the max delta of 0, which means time is not making progress.
Cure it by ensuring that it is initialized before its first usage in
timekeeping_init().
Fixes: 76031d9536a0 ("clocksource: Make negative motion detection more robust")
Reported-by: Teddy Astie <teddy.astie@vates.tech>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Teddy Astie <teddy.astie@vates.tech>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/87y0gn3fve.ffs@fw13
Closes: https://lore.kernel.org/all/1780914594.8631fc262581453bbf619ec5b2062170.19ea6c8227b000701b@vates.tech
|
|
The "ti,n-factor" binding and examples allow negative correction
values. Reading it as u32 makes the helper type disagree with the
documented signed value and hides real schema mismatches.
Use the signed helper so the DT access matches the s32 value stored by
the driver.
Assisted-by: Codex:gpt-5-5
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260612215332.1889497-1-robh@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add a maintainer entry for io_uring bpf struct_ops related files.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://patch.msgid.link/d89f3b89e77b09a18daa45476fd1a40f2ee253cd.1780930463.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Offsets and lengths need to be validated against the dma alignment. This
check was skipped for sufficiently a small bio with a single bvec, which
may allow an invalid request dispatched to the driver. Force the
validation for an unaligned bvec by forcing the bio split path that
handles this condition.
Fixes: 7eac33186957 ("iomap: simplify direct io validity check")
Fixes: 5ff3f74e145a ("block: simplify direct io validity check")
Reported-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://patch.msgid.link/20260612223205.465913-1-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
syzbot reported a possible circular locking dependency in udp_sendmsg()
where fs_reclaim can be triggered while holding sk_lock, and fs_reclaim
can eventually depend on another sk_lock (e.g., if NBD is used for swap
or writeback and NBD uses TLS/TCP which acquires sk_lock).
Since the UDP socket and the NBD TCP/TLS socket are different, this is a
false positive. Fix this by reclassifying NBD sockets to a separate lock
class when they are added to the NBD device.
This is similar to what nvme-tcp and other network block devices do.
Fixes: ffa1e7ada456 ("block: Make request_queue lockdep splats show up earlier")
Reported-by: syzbot+607cdcf978b3e79da878@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6a2cdafe.428ffe26.258b27.0161.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260613042619.1108126-1-edumazet@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_recv() and io_recvzc() are the odd ones out, as they checks for
whether POLL_FIRST should be honored before checking if the file is a
socket. It doesn't really matter, but might as well make it consistent
across all receive and send types.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
With the tctx fallback running its entries directly, the per-ctx
fallback work has a single user left: moving local (DEFER_TASKRUN)
task_work entries out of a ring that is going away. Both of its call
sites are process context and don't hold ->uring_lock, the same
conditions the deferred fallback work itself ran under - so run the
entries in cancel mode right there instead, and rename the helper to
io_cancel_local_task_work() to match what it now does.
With that, ->fallback_llist, ->fallback_work, io_fallback_req_func()
and __io_fallback_tw() can all go away, along with the fallback work
flushing in the ring exit and cancel paths. Requests that get
orphaned by an exiting task now run via the tctx fallback work, which
the ring exit side implicitly waits on through the ctx refs those
requests hold.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The fallback work drains the tctx queue only to redistribute the entries
into the per-ctx fallback lists, bouncing them through a second
(per-ctx) work item before they finally run. That made sense when the
producer side did the draining and could be in any context, but the
fallback work is a regular process context kworker: it can just run the
entries itself. Reuse the normal run loop - if run from the fallback
kernel thread, ts.cancel will get set, and the work terminated.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Like the local task_work list, the normal (tctx) task_work list is an
llist, and hence needs the O(n) llist_reverse_order() pass before
running entries in queue order. On top of that, capped runs - sqpoll
processing IORING_TW_CAP_ENTRIES_VALUE entries at a time - need the
claimed-but-unprocessed leftovers carried in a separate retry_list,
as they can't be pushed back to the shared list.
Switch tctx->task_list to a mpscq, like what was done for the
DEFER_TASKRUN paths as well.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The local (DEFER_TASKRUN) task_work list is an llist, which is LIFO
ordered, and hence __io_run_local_work() has to restore the right
running order with an O(n) llist_reverse_order() pass first. On top of
that, a batch that gets capped by max_events needs the leftover entries
parked on a separate ->retry_llist, as they can't be pushed back to the
shared list.
Switch it to the FIFO mpscq. Adds are wait-free instead of a cmpxchg
retry loop, entries are popped in queue order with no reversal pass,
capping a run simply leaves the remainder on the queue, and
->retry_llist goes away entirely. The consumer cursor, ->work_head,
lives with the rest of the ->uring_lock protected state rather than
next to the queue, so that popping entries doesn't dirty the producer
side cacheline.
For low amounts of task_work, this ends up being a bit more efficient
than the existing scheme. As an example of that, doing multishot
receives for 8 clients has the following task_work overhead:
1.02% sock-test [kernel.kallsyms] [k] io_req_local_work_add
0.88% sock-test [kernel.kallsyms] [k] __io_run_local_work_loop
0.60% sock-test [kernel.kallsyms] [k] llist_reverse_order
0.14% sock-test [kernel.kallsyms] [k] __io_run_local_work
2.64% at ~46Gb/sec
and after this change:
1.08% sock-test [kernel.kallsyms] [k] io_req_local_work_add
1.03% sock-test [kernel.kallsyms] [k] __io_run_local_work
2.11% at ~53Gb/sec
which has less overhead even though that test run was faster. For a case
of having 1024 clients on a single ring:
2.22% sock-test [kernel.kallsyms] [k] llist_reverse_order
0.84% sock-test [kernel.kallsyms] [k] __io_run_local_work_loop
0.42% sock-test [kernel.kallsyms] [k] io_req_local_work_add
0.02% sock-test [kernel.kallsyms] [k] __io_run_local_work
3.50% at ~24Gb/sec
we start to see the llist reversing taking a considerable amount of
time, and the total add+run task_work overhead is around 3.5%. After
the change:
0.90% sock-test [kernel.kallsyms] [k] __io_run_local_work
0.42% sock-test [kernel.kallsyms] [k] io_req_local_work_add
1.32% at ~26Gb/sec
most of that overhead is gone, and performance is better as well.
Caleb Sander Mateos <csander@purestorage.com> reports that it improves
the performance of a ublk 4kb workload by 4% [1], while testing v1 of
this patchset.
[1] https://lore.kernel.org/io-uring/CADUfDZr-MMYBaP-e+y9+xuRhuiunO2sBTUCmwZyd7AgT8sVtiQ@mail.gmail.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Local task_work is currently using llists for managing the work,
but that's a LIFO type of list. This means that running this task_work
needs to reverse the list first, to ensure fairness in running the
queued items.
Add a lockless FIFO queued, based on Dmitry Vyukov's intrusive MPSC
node-based queue algorithm, modified with an externally held consumer
cursor and conditional stub reinsertion. See comments in the header.
Producers are wait-free: a push is a single xchg() on the queue tail,
which serializes concurrent producers and defines the FIFO order, plus
a store linking the node to its predecessor. There are no cmpxchg retry
loops, and pushing is safe from any context, including hardirq.
The cost of linked list FIFO ordering is that a push publishes the node
in two steps - the xchg() makes it visible as the new tail before the
subsequent store links it into the chain that is reachable from the
head. A consumer hitting that window gets a NULL from mpscq_pop() while
mpscq_empty() reports false, and must retry later rather than treat the
queue as empty. The window is two instructions wide, but a producer can
get preempted inside it, so the consumer must not busy wait on it.
The consumer side supports a single consumer at a time, with callers
providing their own serialization. A stub node, which also defines the
empty state (tail == stub), allows the consumer to detach the final
node without racing against producer link stores: that node is only
handed out once the stub has been cmpxchg'ed back in as the tail. This
also guarantees that the previous tail returned by mpscq_push() cannot
get freed before that push has linked it, making it always valid for
comparisons.
The consumer cursor is deliberately not part of the queue struct - the
caller owns it and passes it to mpscq_pop(). This is done to separate
the consumer and producers cacheline. The cursor is written for every
popped entry, and keeping it on the same cacheline as ->tail would have
the consumer invalidating the line that producers need for every push.
Keeping it external lets the caller place it with its own consumer side
data instead.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Not required right now, as io_req_local_work_add() already calls this
helper with the RCU read lock held. But in preparation for that not
being the case, grab it locally.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2026-06-09 (idpf, ixgbe, igc)
Przemyslaw adds needed padding to idpf PTP structures to match firmware
expectations.
Larysa bypasses XPS configuration on XDP queues for ixgbe.
Khai Wen corrects offset into packet buffer when handling for frame
preemption on igc.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: skip RX timestamp header for frame preemption verification
ixgbe: do not configure xps for XDP queues
idpf: add padding to PTP virtchnl structures
====================
Link: https://patch.msgid.link/
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
KASAN prints below splat. This is caused by allocating counter for
reserved mcam entry for cpt 2nd pass entry. But mcam->entry2cntr_map
is not allocated for reserved entries.
BUG: KASAN: slab-out-of-bounds in npc_map_mcam_entry_and_cntr+0xb0/0x1a0
Write of size 2 at addr ffff0001033e7ffe by task kworker/0:1/14
CPU: 0 PID: 14 Comm: kworker/0:1 Not tainted 6.1.67 #1
Hardware name: Marvell CN106XX board (DT)
Workqueue: events work_for_cpu_fn
Call trace:
dump_backtrace.part.0+0xe4/0xf0
show_stack+0x18/0x30
dump_stack_lvl+0x88/0xb4
print_report+0x154/0x458
kasan_report+0xb8/0x194
__asan_store2+0x7c/0xa0
npc_map_mcam_entry_and_cntr+0xb0/0x1a0
rvu_mbox_handler_npc_mcam_write_entry+0x268/0x280
npc_install_flow+0x840/0xfe0
rvu_npc_install_cpt_pass2_entry+0x138/0x190
rvu_nix_init+0x148c/0x2880
rvu_probe+0x1800/0x30b0
local_pci_probe+0x78/0xe0
work_for_cpu_fn+0x30/0x50
process_one_work+0x4cc/0x97c
worker_thread+0x360/0x630
kthread+0x1a0/0x1b0
ret_from_fork+0x10/0x20
Fixes: 55307fcb9258 ("octeontx2-af: Add mbox messages to install and delete MCAM rules")
Cc: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260610022344.969774-1-rkannoth@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
