| Age | Commit message (Collapse) | Author |
|---|
|
The ETF qdiscs drops traffic without a socket or txtime. Even with
parameter skip_sock_check regular traffic is affected by ETF.
This test ran fine when run manually in a pure software environment.
But with drv-net across two hosts tests fail as early as when calling
cfg.remote.deploy due to effectively losing connectivity.
Isolate the intended test traffic:
- mark that with SO_MARK 100
- install a regular permissive root prio qdisc for background traffic
- install the ETF qdisc as leaf
- install a filter that only directs SO_MARK 100 traffic to this leaf
Technically other high prio traffic will map onto this leaf based on
ToS band mapping too. But that is immaterial in practice.
Fixes: 5c6baef3885c ("selftests: drv-net: convert so_txtime to drv-net")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260808160129.890119-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
CONFIG_PCIE_ULTRARISC is a tristate option and may be built as a module.
Use module_platform_driver() so the driver uses the standard registration
helper for both built-in and module configurations.
Leave .remove() unset because the driver registers an internal MSI
controller and the IRQs cannot be safely disposed during removal.
Signed-off-by: Jia Wang <wangjia@ultrarisc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260731-ultrarisc-pci-clk-v4-3-d738b491e49a@ultrarisc.com
|
|
Add the required core, dbi, and aux clocks for the DP1000 PCIe controller
and enable them before initializing the controller.
Also manage the clocks across system suspend and resume.
Fixes: 5fc35740c3b3 ("PCI: ultrarisc: Add UltraRISC DP1000 PCIe Root Complex driver")
Signed-off-by: Jia Wang <wangjia@ultrarisc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260731-ultrarisc-pci-clk-v4-2-d738b491e49a@ultrarisc.com
|
|
Require DP1000 PCIe controller nodes to provide clocks and clock-names,
using the standard DesignWare clock names "core", "dbi", and "aux".
Fixes: d9ff07f45955 ("dt-bindings: PCI: Add UltraRISC DP1000 PCIe controller")
Signed-off-by: Jia Wang <wangjia@ultrarisc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260731-ultrarisc-pci-clk-v4-1-d738b491e49a@ultrarisc.com
|
|
eeprom_wait_ready() returns a negative error when the LBCIF status
cannot be read or the device does not become ready for some other
reason.
eeprom_write() propagates this error before starting a write, but
currently returns 0 when the same readiness check fails after the
write begins.
This behavior was introduced when the EEPROM code was refactored to
use Linux error-return conventions (from 0 = failure to 0 = success).
Return the error so callers do not treat a failed EEPROM write as
successful and the function contract is maintained.
Cc: stable+noautosel@kernel.org # untested fix to unlikely driver error path
Signed-off-by: Avi Weiss <thnkslprpt@gmail.com>
Acked-by: Mark Einon <mark.einon@gmail.com>
Link: https://patch.msgid.link/20260808194347.813242-1-thnkslprpt@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
hwmon_sanitize_name() allocates sfp->hwmon_name before
hwmon_device_register_with_info() is called. If the registration
fails, sfp->hwmon_dev is left pointing to an error while
sfp->hwmon_name remains allocated.
Later, when the SFP module is removed, sfp_hwmon_remove() only frees
hwmon_name when hwmon_dev is valid. As a result, hwmon_name is leaked
if hwmon_device_register_with_info() fails.
Free hwmon_name independently of hwmon_dev. Continue to unregister the
hwmon device only when hwmon_dev was successfully registered.
Cc: stable+noautosel@kernel.org # untested fix to unlikely driver error path
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Krishan Singh <krishanmohan298@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260809064504.70579-1-krishanmohan298@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Heiko Carstens says:
====================
drivers/s390/net: Enable CONTEXT_ANALYSIS
Enable CONTEXT_ANALYSYS for drivers/s390/net.
Static code checking for acquiring and releasing locks used to be done
with sparse. That was removed with [1] and replaced with a clang based
approach [2]. The new approach requires that each subsystem needs to be
explicitly enabled for checking.
Do that for drivers/s390/net. In order to avoid false positives due to
conditional locking, disable context analysis for specific functions of
the ctcm driver. All comments in ctcm indicate that the code should stay
as it is, and that such warnings should be ignored.
Disabling context analysis for specific functions keeps analysis enabled
for the rest of a file.
[1] 5b63d0ae94cc ("compiler-context-analysis: Remove Sparse support")
[2] 3269701cb256 ("compiler-context-analysis: Add infrastructure for Context Analysis with Clang")
====================
Link: https://patch.msgid.link/20260805145032.1409325-1-hca@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All drivers in drivers/s390/net pass clang's compile time context
analysis. Therefore enable CONTEXT_ANALYSIS.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260805145032.1409325-3-hca@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Disable context analysis for various functions to get rid of context
analysis compile time warnings using clang caused by conditional
locking like e.g.:
drivers/s390/net/ctcm_fsms.c:1457:8:
warning: spinlock 'arg->cdev->ccwlock' is not held on every path through here
drivers/s390/net/ctcm_fsms.c:1459:4:
warning: releasing spinlock 'arg->cdev->ccwlock' that was not held
Use __context_unsafe() to provide a short comment why context analysis is
disabled for each function. Each of those functions already contains a
comment that the (previous) sparse context analysis warnings due to
conditional locking should be ignored.
Remove those comments everywhere and use the __context_unsafe() attribute
instead.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260805145032.1409325-2-hca@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The RUH status buffer and the placement-handle clamp used S8_MAX - 1
(126) as the maximum descriptor count. That value was picked only so the
io-mgmt-receive result fit in a page, not because of any protocol or
driver restriction.
The meaningful upper bound is U8_MAX: write hints (bio->bi_write_stream)
are u8, so placement handles beyond U8_MAX can never be selected. Size
the buffer and clamp nr_plids to U8_MAX.
Suggested-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
aa_vec_unique() null terminates at vec[n - dups] when VEC_FLAG_TERMINATE
is passed. If the components are all distinct no duplicates are dropped,
dups is 0 and the terminator goes to vec[n], so the caller has to provide
room for n + 1 entries.
aa_label_strn_parse() sets up its vector with vec_setup(profile, vec, len,
gfp) and then calls aa_vec_unique(vec, len, VEC_FLAG_TERMINATE), but
vec_setup() does not reserve the terminator entry. Up to LOCAL_VEC_ENTRIES
it uses the local array of LOCAL_VEC_ENTRIES pointers, above that it
allocates exactly len pointers. The terminator therefore lands one entry
past the end of the local array when len is LOCAL_VEC_ENTRIES, and one
entry past the end of the allocation when len is larger.
len comes from the number of "//&" separated components in the label name
and label_count_strn_entries() does not bound it. An unprivileged task
reaches the parse by writing to /proc/self/attr/apparmor/current or through
lsm_set_self_attr(2), both of which go through do_setattr(), and the name
is parsed before the change_profile permission is checked.
The query_label() path behind the securityfs .access file, which is
mode 0666, performs no permission check at all. Every component has to
resolve to a loaded profile, so a system with policy loaded is required.
The other two VEC_FLAG_TERMINATE users work on a label vec that
aa_label_alloc() has already sized with "+ 1 for null terminator entry on
vec". Reserve the same entry in vec_setup() and DEFINE_VEC(). Passing
len + 1 from the caller instead would move len == LOCAL_VEC_ENTRIES out of
the local array and into kzalloc().
Fixes: f1bd904175e8 ("apparmor: add the base fns() for domain labels")
Cc: stable@vger.kernel.org
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
Some devices refresh the statistics exposed via ethtool only
periodically, every stats-block-usecs (as reported by ethtool -c).
ethtool_std_stats and ethtool_rmon sample the counters immediately
after generating traffic, so on such devices they can read stale
values and fail with a delta short of the packets just sent.
Add a hw_stats_settle() helper which sleeps for 1.25x the configured
stats-block-usecs (defaulting to 20ms when the device reports no, or
a zero, period). Use it for ethtool std stats and RMON.
The 1.25x/20msec heuristic matches what the Python tests do.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260808163653.2460381-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mausezahn defaults to sending packets back to back at the maximum rate,
which can cause packet loss, especially if receiver is running a debug
kernel. Space the generated packets out (-d 10usec), like ethtool_rmon
already does.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260808163653.2460381-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The adaptive-rx and adaptive-tx checks use 'ethtool -c | grep -q' under
'set -o pipefail'. grep -q exits as soon as it finds a match, which can
happen before ethtool finishes writing its output. When that occurs,
ethtool receives SIGPIPE causing (uninformative):
# selftests: drivers/net/netdevsim: ethtool-coalesce.sh
# FAILED 1/22 checks
not ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh # exit=1
This happens on debug kernels in NIPA, ~4% of the time.
Link: https://patch.msgid.link/20260808163416.2456810-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make sure we check if nla_put_u32(id) was successful after creating
objects. This is theoretical today, the skbs are large enough to
always fit the ID.
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260809000609.327659-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The USO features in set_offload() incorrectly uses feature_mask and
features argument.
The USO feature was written to the local features variable instead of
feature_mask. All other offload bits (TSO, TSO_ECN) are stored in
feature_mask which becomes tap->tap_features and is used by
tap_handle_frame() for GSO segmentation. Without NETIF_F_GSO_UDP_L4
in tap->tap_features, making USO on tap effectively non-functional.
Keeping the USO handling inside the TUN_F_CSUM block avoids enabling
GRO/LRO when userspace requests USO without CSUM.
This has not worked since the beginning, so
commit 399e0827642f ("driver/net/tun: Added features for USO.")
Signed-off-by: Rongguang Wei <weirongguang@kylinos.cn>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260807070914.112698-1-clementwei90@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a tdc case covering the leak fixed by the previous patch.
The test attaches "action ct" to a clsact ingress chain and injects ten
IPv6 frames whose nexthdr says hop-by-hop but which carry nothing after
the 40-byte header, so ipv6_find_hdr() fails and
tcf_ct_ipv6_is_fragment() returns -EPROTO.
Before the fix act_ct returned TC_ACT_CONSUMED for these packets, so
tc_run() never reached its TC_ACT_SHOT arm and the clsact drop counter
stayed at zero while the skbs leaked. After the fix the packets are
dropped properly and the counter reflects them, which is what the test
matches on:
before: Sent 476 bytes 11 pkt (dropped 0, overlimits 0 requeues 0)
after: Sent 400 bytes 10 pkt (dropped 10, overlimits 0 requeues 0)
Signed-off-by: Hyunjung Ko <hj351016@gmail.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260806101235.809370-2-hj351016@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tcf_ct_handle_fragments() runs its header sanity checks before handing
anything to the defragmentation engine:
if (family == NFPROTO_IPV4)
err = tcf_ct_ipv4_is_fragment(skb, &frag);
else
err = tcf_ct_ipv6_is_fragment(skb, &frag);
if (err || !frag)
return err;
tcf_ct_ipv4_is_fragment() returns -EINVAL or -ENOMEM;
tcf_ct_ipv6_is_fragment() adds -EPROTO when ipv6_find_hdr() fails. None of
them frees or queues the skb, so on that path the caller still owns it.
tcf_ct_act() however funnels every non-zero return into the
ownership-transfer exit:
err = tcf_ct_handle_fragments(net, skb, family, p->zone, &defrag);
if (err)
goto out_frag;
...
out_frag:
if (err != -EINPROGRESS)
tcf_action_inc_drop_qstats(&c->common);
return TC_ACT_CONSUMED;
TC_ACT_CONSUMED means the action took ownership of the skb, so no caller
frees it - sch_handle_ingress(), sch_handle_egress() and
tcf_qevent_handle() all deliberately skip the free for that verdict. The
skb is therefore orphaned: one sk_buff plus its data buffer is leaked per
malformed packet, unbounded. Note the drop counter is already incremented
for these errors, so the statistics claim a drop that never happens.
Three different ownership states reach out_frag: today - the skb may be
queued by the defrag engine (-EINPROGRESS), already freed by
nf_ct_handle_fragments(), or still owned by us. Tell the caller which of
those it is, and free the packet ourselves in the last case, which
restores the TC_ACT_SHOT behaviour that predated the Fixes: commit.
Reproduced on v7.2-rc6 with a 54-byte frame carrying a 40-byte IPv6
header with nexthdr = 0 (hop-by-hop) and nothing after it, on a
clsact ingress chain with "action ct". kmemleak reports one leaked
232-byte skbuff_head_cache object plus its 704-byte data buffer per
packet; with this patch it reports none.
Fixes: 3f14b377d01d ("net/sched: act_ct: fix skb leak and crash on ooo frags")
Cc: stable@vger.kernel.org # v6.8+
Signed-off-by: Hyunjung Ko <hj351016@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260806101235.809370-1-hj351016@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
"xlnx,rxmem" device-tree property is used to learn the size of the Rx/Tx
packet buffer built into the ethernet IP, but return value of
of_property_read_u32() is ignored. When the property is absent lp->rxmem is
left at 0, which silently limits the interface to the default MTU and
disables jumbo frames with no indication of the misconfiguration.
"xlnx,rxmem" has been documented as a required property since the binding
was introduced. Check the return value of of_property_read_u32() and fail
probe when the property is missing, so a misconfigured device tree is
reported rather than silently degrading functionality.
Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://patch.msgid.link/20260806170253.1199749-1-suraj.gupta2@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
upayload->data includes an extra NUL terminator even though it is never
used as a C string. In-tree users access only the first
upayload->datalen bytes.
Remove the redundant NUL terminator and allocate one byte less for
upayload->data in dns_resolver_preparse().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260806200454.245444-3-thorsten.blum@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The attribute of netlink error message should be IFLA_BOND_ARP_VALIDATE
when ARP validation setting fails.
Added by commit 2bff369b2354 ("bonding: netlink error message support
for options").
Signed-off-by: Hangbin Liu <liuhangbin@kylinos.cn>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260806-bond_arp_validate-v1-1-3ae005657ef9@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Variables handling inode numbers - such as the 'i_ino' member of the
inode structure - have been converted to 'u64' within the kernel to
ensure consistency. However, some parts of the nilfs2 implementation
still use 'ino_t' or 'unsigned long' - both of which are
architecture-dependent types - to handle inode numbers.
Replace those remaining instances of 'ino_t' or 'unsigned long' with
'u64'.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
|
|
In rtlgen_write_mmd(), the MDIO_AN_EEE_ADV case swaps the arguments to
rtlgen_write_vend2(): it passes the MMD register number as the OCP address
and the OCP address constant as the value. The caller's value is discarded
and the write lands on the wrong register, so the EEE advertisement cannot
be configured on the affected PHYs.
Mirror rtlgen_read_mmd() and write the value to RTL_MDIO_AN_EEE_ADV.
Fixes: da681ed73fb9 ("net: phy: realtek: improve mmd register access for internal PHY's")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260806134716.3511821-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a lower device is unregistered, amt_device_event() tries
to unregister its upper AMT device, but it has two problems.
1. amt_lookup_upper_dev() looks up an upper device in the
lower device's netns only
2. amt_device_event() unregisters a single upper device only
If AMT device is created on a lower device in another netns,
removing the lower device triggers the splat below and gets
stuck until all upper devices are removed. [0]
The cross-netns setup seems unintentional considering 1. and
the following points:
* amt_link_setup() sets dev->netns_immutable to true
* skb_scrub_packet() is not called in the fast path
* iproute2 binary fails to find cross-netns lower device via
link-netns:
# ip -n ns1 link add amt0 link-netns ns2 type amt dev veth1
Cannot find device "veth1"
Instead of supporting it properly and preparing for per-netns
netdev unreg, let's forbid cross-netns setup.
Note that the problem 2. needs a separate fix.
[0]:
WARNING: net/core/dev.c:12518 at unregister_netdevice_many_notify+0x1cce/0x2250, CPU#48: ip/2031
Modules linked in:
CPU: 48 UID: 0 PID: 2031 Comm: ip Not tainted 7.2.0-rc5+ #27 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
RIP: 0010:unregister_netdevice_many_notify (net/core/dev.c:12518)
Code: 89 ef e8 d5 52 ae fe e9 d0 f4 ff ff 48 8d 3d f9 3b 9c 02 48 c7 c6 c0 0b 63 84 ba ab 1f 00 00 67 48 0f b9 3a e9 65 ff ff ff 90 <0f> 0b 90 eb 81 48 8d 3d f6 3b 9c 02 48 c7 c6 c0 0b 63 84 ba e2 1f
RSP: 0018:ffffc90004abf160 EFLAGS: 00010212
RAX: ffff888104d38260 RBX: ffff88800b0911b8 RCX: dffffc0000000000
RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffffff85b9f880
RBP: ffffc90004abf2d0 R08: ffffffff85b9f887 R09: 1ffffffff0b73f10
R10: dffffc0000000000 R11: fffffbfff0b73f11 R12: ffff88800b091d08
R13: ffff88800b091178 R14: dffffc0000000000 R15: ffff88800b091000
FS: 00007f555b86c600(0000) GS:ffff8881942a0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000562107d489c0 CR3: 0000000109a40002 CR4: 0000000000372ef0
Call Trace:
<TASK>
rtnl_dellink (net/core/rtnetlink.c:3632 net/core/rtnetlink.c:3674)
rtnetlink_rcv_msg (net/core/rtnetlink.c:7112)
netlink_rcv_skb (net/netlink/af_netlink.c:2556)
netlink_unicast (net/netlink/af_netlink.c:1319)
netlink_sendmsg (net/netlink/af_netlink.c:1900)
____sys_sendmsg (net/socket.c:775)
__sys_sendmsg (net/socket.c:2738)
do_syscall_64 (arch/x86/entry/syscall_64.c:63)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
...
unregister_netdevice: waiting for veth0 to become free. Usage count = 7
ref_tracker: netdev@ffff88800d7496d8 has 3/3 users at
__netdev_adjacent_dev_insert (./include/linux/netdevice.h:4525 ./include/linux/netdevice.h:4554 net/core/dev.c:8791)
__netdev_upper_dev_link (net/core/dev.c:8879 net/core/dev.c:8963)
netdev_upper_dev_link (net/core/dev.c:9009)
amt_newlink (drivers/net/amt.c:3321)
Fixes: b9022b53adad ("amt: add control plane of amt interface")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20260807020326.2519445-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On cross-region connections we observed delayed ACKs suddenly turning
into immediate ACKs plus a TCP_MAX_QUICKACKS burst, as if the
connection had just received its first data segment.
Commit 95b9a87c6a6b ("tcp: record last received ipv6 flowlabel")
squeezed icsk_ack.ato into 8 bits, sized for TCP_DELACK_MAX. But both
writers still bound ato by icsk_rto, which can be well above 255
jiffies, so the bitfield assignment silently wraps mod 256: repeated
delack timer misses double ato up to icsk_rto, storing 320 as 64 and
256 as 0, and ato == 0 is the "first data packet" sentinel in
tcp_event_data_recv().
Clamp both writers to TCP_DELACK_MAX, which the static_assert already
guarantees to fit and tcp_send_delayed_ack() effectively caps ato at
anyway.
Fixes: 95b9a87c6a6b ("tcp: record last received ipv6 flowlabel")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20260807014437.36687-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot reported a warning on nilfs_btree_assign:
WARNING: fs/nilfs2/btree.c:2302 at nilfs_btree_assign+0x983/0xbe0 fs/nilfs2/btree.c:2302,
Analysis found that a corrupted file has the following btree layout:
Level2(key/ptr): [ 256/15 ]
Level1(key/ptr): [ 0/8, 1/9, 0/10, 3/11, 4/12, 5/13, 6/14,
139637976727559/16, 0/17 ]
The test truncated the file to 2 bytes, which partially zeroes the first
block and adds the file to the dirty list. When the segment constructor
writes it and assigns a new blocknr for the index block, it searches the
btree with key=0 and min level=2, and apparently returns -ENOENT.
Therefore, we should perform more checks on the btree nodes and return
early.
[ryusuke: split long lines in btree.c to satisfy checkpatch and
improved the error message format for clarity]
Reported-by: syzbot+158be45e4d99232e1900@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=158be45e4d99232e1900
Signed-off-by: Wang Jianjian <wangjianjian3@huawei.com>
Fixes: 17c76b0104e4 ("nilfs2: B-tree based block mapping")
Cc: stable+noautosel@kernel.org # Warning suppression primarily
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
|
|
tcf_action_check_ctrlact() range checks the primary control action:
if (!opcode)
ret = action > TC_ACT_VALUE_MAX ? -EINVAL : 0;
TC_ACT_VALUE_MAX is TC_ACT_TRAP, so kernel-internal verdicts above it
cannot be set that way. But act_gact and act_police each carry a second,
independent control action supplied by user space that never reaches that
helper - TCA_GACT_PROB.paction and TCA_POLICE_RESULT. Both only reject
TC_ACT_GOTO_CHAIN, so any other value is stored verbatim and returned
verbatim from the action.
In particular user space can store TC_ACT_CONSUMED, which is
TC_ACT_VALUE_MAX + 1 and is deliberately not part of the UAPI value
range. That verdict tells every caller the action took ownership of the
skb, so nobody frees it: sch_handle_ingress(), sch_handle_egress() and
tcf_qevent_handle() all deliberately skip the free for it. The result is
one leaked sk_buff plus its data buffer per packet traversing the filter,
unbounded, for all traffic on the chain including kernel-generated
packets.
Both are trivially deterministic. act_gact clamps tcfg_pval to >= 1, so
with pval = 1 gact_determ() returns the fallback for every packet.
act_police has no mandatory rate, so rate = 0 leaves tcfp_mtu = ~0 and
tcf_police_mtu_check() always passes.
TC_ACT_CONSUMED was added by commit 720f22fed81b ("net: sched: refactor
reinsert action"), after both goto-chain guards were written:
commit 9469f375ab09 ("net/sched: act_gact: disallow 'goto chain' on
fallback control action") and
commit c08f5ed5d625 ("net/sched: act_police: disallow 'goto chain' on
fallback control action"). Neither guard was widened when the new
verdict appeared.
Factor the existing range test out of tcf_action_check_ctrlact() as
tcf_action_valid() and apply it to both fallbacks. The helper cannot call
tcf_action_check_ctrlact() directly because that also allocates a
goto_chain, which is exactly what these two sites must not do.
Reproduced on v7.2-rc6: kmemleak reports one leaked 232-byte
skbuff_head_cache object plus its 704-byte data buffer per packet. With
this patch both configurations are rejected with -EINVAL and kmemleak
reports none.
Fixes: 720f22fed81b ("net: sched: refactor reinsert action")
Cc: stable@vger.kernel.org # v5.3+
Signed-off-by: Hyunjung Ko <hj351016@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260806101252.809593-1-hj351016@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
veth_poll() derives the index of the peer TX queue to wake from
rq->xdp_rxq.queue_index. That field is only initialized by
xdp_rxq_info_reg() in veth_enable_xdp_range(), which runs only when an
XDP program is attached. On the plain GRO/NAPI path
(veth_napi_enable_range()) xdp_rxq_info_reg() is never called, so
queue_index stays 0 for every queue, as priv->rq is zero-allocated.
So in a multi-queue setup with GRO enabled and no XDP program attached,
every NAPI instance looks at the peer's TX queue 0. If veth_xmit() stops
peer TX queue 1 because the ptr_ring is full (NETDEV_TX_BUSY), nothing
ever wakes it again: the poller draining queue 1 wakes queue 0 instead.
veth implements no ndo_tx_timeout, so the netdev watchdog does not kick
in either, and the queue stays stopped indefinitely.
Derive the index from the position of the rq within priv->rq instead,
which is correct regardless of whether XDP was ever enabled.
Scripts to reproduce the stall are available at
https://github.com/netoptimizer/veth-backpressure-performance-testing
Fixes: dc82a33297fc ("veth: apply qdisc backpressure on full ptr_ring to reduce TX drops")
Signed-off-by: Jonas Köppeler <j.koeppeler@tu-berlin.de>
Tested-by: Jesper Dangaard Brouer <hawk@kernel.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://patch.msgid.link/20260806-veth-fix-poll-queue-idx-v1-1-c5357fb7573d@tu-berlin.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
netdev_queue_get_dma_dev() uses "compat" locking assert which wants
either the rtnl_lock or netdev instance lock. This is not right,
the callers are taking the instance lock unconditionally. All entry
points for queue config are purely instance locked.
In other words the callers use netdev_get_by_index_lock(), not
netdev_get_by_index_lock_ops_compat(). All the state we will
access is effectively instance lock protected (it's const for
devices which are not ops-locked).
Update the assert to avoid false positive warnings.
Cc: stable@vger.kernel.org
Fixes: b6c5f9454ef34 ("io_uring/zcrx: call netdev_queue_get_dma_dev() under instance lock")
Reported-by: syzbot+a78926bdac2adb52dc0e@syzkaller.appspotmail.com
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/20260806225627.3998672-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next into for-7.3-arena-args
Pull bpf-next d114bb989367 ("Merge branch
'add-arena-argument-support-to-kfuncs-and-struct_ops'") to make the __arena
and __arena__nullable kfunc and struct_ops argument suffixes available. The
suffixed arguments will be used to convert sched_ext kfuncs and struct_ops
callbacks that currently pass arena pointers as scalars and rebase them by
hand.
|
|
Artem Shimko says:
====================
Add DAPU Telecom DAP8211R(I) Gigabit Ethernet PHY driver
This series adds support for the DAPU Telecom DAP8211R(I) Gigabit
Ethernet PHY, commonly used in enterprise and industrial networking
applications. The PHY supports 10/100/1000 Mbps operation with RGMII
interface and includes features such as IEEE 802.3az Energy Efficient
Ethernet, IEEE 1588 SyncE.
The driver implements extended register access via indirect addressing
(registers 0x1E/0x1F) and provides comprehensive device tree support
for RGMII delay configuration. The rx-internal-delay-ps and
tx-internal-delay-ps properties allow precise tuning of clock delays
in 150 ps steps from 0 to 2250 ps.
This PHY is used on the NDA platform with 1G Ethernet tile and has
been tested on that hardware with successful link establishment and
RGMII delay tuning.
$ make dt_binding_check DT_SCHEMA_FILES=dptel,dap8211r.yaml
SCHEMA Documentation/devicetree/bindings/processed-schema.json
CHKDT ./Documentation/devicetree/bindings
LINT ./Documentation/devicetree/bindings
STYLE ./Documentation/devicetree/bindings
DTEX Documentation/devicetree/bindings/net/dptel,dap8211r.example.dts
DTC [C] Documentation/devicetree/bindings/net/dptel,dap8211r.example.dtb
$ yamllint Documentation/devicetree/bindings/net/dptel,dap8211r.yaml
$ grep -i "dap8211r" Documentation/devicetree/bindings/processed-schema.json
"http://devicetree.org/schemas/net/dptel,dap8211r.yaml": {
"$filename": "/home/a-shimko/patchwork/linux/Documentation/devicetree/bindings/net/dptel,dap8211r.yaml",
"$id": "http://devicetree.org/schemas/net/dptel,dap8211r.yaml#",
"title": "DAPU Telecom DAP8211R(I) Gigabit Ethernet PHY",
Working with xgmac.
Board side:
$ arping -I eth0 192.168.5.100
ARPING 192.168.5.1 from 192.168.5.100 eth0
Unicast reply from 192.168.5.1 [board.mac.addr] 8.543ms
Unicast reply from 192.168.5.1 [board.mac.addr] 3.295ms
Unicast reply from 192.168.5.1 [board.mac.addr] 4.301ms
Unicast reply from 192.168.5.1 [board.mac.addr] 4.096ms
Unicast reply from 192.168.5.1 [board.mac.addr] 2.872ms
...
Unfortunately, there is a dependence on the axibus speed here
$ iperf3 -c 192.168.5.1
Connecting to host 192.168.5.1, port 5201
[ 5] local 192.168.5.100 port 58936 connected to 192.168.5.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 7.88 MBytes 65.8 Mbits/sec 0 150 KBytes
[ 5] 1.00-2.00 sec 8.50 MBytes 71.4 Mbits/sec 0 165 KBytes
[ 5] 2.00-3.00 sec 8.25 MBytes 69.2 Mbits/sec 0 165 KBytes
[ 5] 3.00-4.01 sec 8.50 MBytes 71.1 Mbits/sec 0 165 KBytes
[ 5] 4.01-5.00 sec 8.38 MBytes 70.3 Mbits/sec 0 165 KBytes
[ 5] 5.00-6.00 sec 8.50 MBytes 71.5 Mbits/sec 0 165 KBytes
[ 5] 6.00-7.01 sec 8.62 MBytes 72.0 Mbits/sec 0 174 KBytes
[ 5] 7.01-8.00 sec 8.62 MBytes 72.8 Mbits/sec 0 174 KBytes
[ 5] 8.00-9.00 sec 8.62 MBytes 72.2 Mbits/sec 0 174 KBytes
[ 5] 9.00-10.04 sec 8.62 MBytes 69.9 Mbits/sec 0 174 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.04 sec 84.6 MBytes 70.7 Mbits/sec 0 sender
[ 5] 0.00-10.12 sec 84.8 MBytes 70.3 Mbits/sec receiveriperf Done.
$ ethtool -t eth0
...
The test extra info:
1. MAC Loopback 0
2. MAC Loopback (diff. queues) 0
3. PHY Loopback 0
...
ELP side:
...
17:29:11.974973 ARP, Reply ELP is-at elp.mac.addr(oui Unknown), length 28
17:29:12.975199 ARP, Request who-has ELP tell 192.168.5.100, length 46
17:29:12.975217 ARP, Reply ELP is-at elp.mac.addr(oui Unknown), length 28
17:29:13.975022 ARP, Request who-has ELP tell 192.168.5.100, length 46
17:29:13.975035 ARP, Reply ELP is-at elp.mac.addr(oui Unknown), length 28
17:29:14.974837 ARP, Request who-has ELP tell 192.168.5.100, length 46
17:29:14.974849 ARP, Reply ELP is-at elp.mac.addr(oui Unknown), length 28
17:29:15.975026 ARP, Request who-has ELP tell 192.168.5.100, length 46
...
Accepted connection from 192.168.5.100, port 58932
[ 5] local 192.168.5.1 port 5201 connected to 192.168.5.100 port 58936
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 7.12 MBytes 59.7 Mbits/sec
[ 5] 1.00-2.00 sec 8.50 MBytes 71.3 Mbits/sec
[ 5] 2.00-3.00 sec 8.50 MBytes 71.3 Mbits/sec
[ 5] 3.00-4.00 sec 8.38 MBytes 70.3 Mbits/sec
[ 5] 4.00-5.00 sec 8.50 MBytes 71.3 Mbits/sec
[ 5] 5.00-6.00 sec 8.38 MBytes 70.3 Mbits/sec
[ 5] 6.00-7.00 sec 8.62 MBytes 72.4 Mbits/sec
[ 5] 7.00-8.00 sec 8.62 MBytes 72.3 Mbits/sec
[ 5] 8.00-9.00 sec 8.62 MBytes 72.4 Mbits/sec
[ 5] 9.00-10.00 sec 8.62 MBytes 72.4 Mbits/sec
[ 5] 10.00-10.12 sec 896 KBytes 62.3 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate
[ 5] 0.00-10.12 sec 84.8 MBytes 70.3 Mbits/sec receiver
DTS node example:
ðernet_1g_tile {
...
phy-mode = "rgmii-rxid";
phy-handle = <&phy1>;
...
mdio: mdio {
phy1: ethernet-phy@1 {
...
compatible = "ethernet-phy-id0008.011b";
rx-internal-delay-ps = <1950>;
...
};
};
};
====================
Link: https://patch.msgid.link/20260805085540.452260-1-a.shimko.dev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new PHY driver for the DAPU Telecom DAP8211R(I) Gigabit
Ethernet PHY, which is commonly used in enterprise and industrial
networking applications.
The driver implements extended register access via indirect addressing
through corresponding registers, and provides comprehensive device tree
support for RGMII delay configuration. The rx-internal-delay-ps and
tx-internal-delay-ps properties allow precise tuning of clock delays in
150 ps steps from 0 to 2250 ps.
Signed-off-by: Artem Shimko <a.shimko.dev@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260805085540.452260-4-a.shimko.dev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add device tree binding documentation for the DAPU Telecom DAP8211R(I)
Gigabit Ethernet PHY.
The PHY supports TX and RX clock delays in 150 ps steps from 0 to 2250 ps,
with a default of 1950 ps if not specified.
Signed-off-by: Artem Shimko <a.shimko.dev@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260805085540.452260-3-a.shimko.dev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add vendor prefix for Guangdong Dapu Telecom Co., Ltd. [1], a manufacturer
of Ethernet PHYs, networking and other equipment. The prefix will be
used in the DAP8211R(I) Gigabit Ethernet PHY binding.
[1] https://www.dptel.com/
Signed-off-by: Artem Shimko <a.shimko.dev@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260805085540.452260-2-a.shimko.dev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The commit message for af8c8a450bf4 ("selftests: net: Add FIN_ACK
processing order related latency spike test") states: "if the latency
is larger than 1 second (spike), print a message". However the code
uses a threshold of 100000 us (100 ms), not 1000000 us (1 s).
The lower threshold causes false positives on slower hardware where
normal connection latency occasionally exceeds 100 ms but never
approaches the 1 s spike that indicates the actual FIN/ACK race bug.
Fix the threshold to match the documented intent.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Brian Grech <bgrech@redhat.com>
Link: https://patch.msgid.link/20260806151645.4172900-1-bgrech@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
macvlan devices inherit hard_header_len from lowerdev during macvlan_init(),
but leave needed_headroom and needed_tailroom set to 0.
When the underlying lowerdev requires extra headroom or tailroom for
headers/trailers (e.g. macsec, ipsec, wireguard, tunnels, or veth with rx
headroom), upper layers calculating packet headroom and tailroom fail to
reserve sufficient space.
This can result in reallocation overhead, skb headroom underflows, or KASAN
slab-use-after-free crashes when dev_hard_header() / macvlan_hard_header()
prepends header data or when lower devices append tailroom.
Fix this by:
1. Inheriting needed_headroom and needed_tailroom from lowerdev in macvlan_init().
2. Propagating needed_headroom and needed_tailroom updates to attached macvlans
in macvlan_device_event() when receiving NETDEV_FEAT_CHANGE events.
Fixes: b863ceb7ddce ("[NET]: Add macvlan driver")
Reported-by: Tangxin Xie <xietangxin@h-partners.com>
Closes: https://lore.kernel.org/netdev/CANn89i+1EW-sFNK8xoq98gMbPCeLS7e=+rs9gHfLg5Wj+4x0sw@mail.gmail.com/T/#m16adf0ff972cbfd8066c3a8e656e75eaeb12d021
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Hangbin Liu <liuhangbin@kylinos.cn>
Link: https://patch.msgid.link/20260806141938.287660-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ipvlan devices inherit hard_header_len from phy_dev during ipvlan_init(),
but leave needed_headroom and needed_tailroom set to 0.
When the underlying phy_dev (or stacked lower device) requires extra headroom
or tailroom for headers/trailers (e.g. macsec, ipsec, wireguard, tunnels, or
veth with rx headroom), upper layers calculating packet headroom and tailroom
fail to reserve sufficient space.
This can result in reallocation overhead, skb headroom underflows, or KASAN
slab-use-after-free crashes when dev_hard_header() / ipvlan_hard_header()
prepends header data or when lower devices append tailroom.
Fix this by:
1. Inheriting needed_headroom and needed_tailroom from phy_dev in ipvlan_init().
2. Propagating needed_headroom and needed_tailroom updates to attached ipvlans
in ipvlan_device_event() when receiving NETDEV_FEAT_CHANGE events.
Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.")
Reported-by: syzbot+1f9fd0f4b601cf88d6e6@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6a720a21.40259c87.584f4.04bb.GAE@google.com/T/#u
Reported-by: Tangxin Xie <xietangxin@h-partners.com>
Closes: https://lore.kernel.org/netdev/CANn89i+1EW-sFNK8xoq98gMbPCeLS7e=+rs9gHfLg5Wj+4x0sw@mail.gmail.com/T/#mcc6307f115e500df23ea2980d5669fe95f20b6b4
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Hangbin Liu <liuhangbin@kylinos.cn>
Link: https://patch.msgid.link/20260806103857.115541-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jakub Kicinski says:
====================
eth: bnxt: fix IRQ notifier bugs
I was trying to make bnxt preserve IRQ mappings across reconfiguration.
While hacking on that I noticed 2 bugs in the notifiers that should
probably be fixed before development work.
First one is simple - TPH recofig makes aARFs not work. There can only
be one notifier per IRQ and TPH "steals" the callback from the rmap
updates. Fix by patches 1 and 2.
Second one is a deadlock between the affinity notifier and reconfig.
This one is a bit more involved (patch 3 and 4).
Unfortunately, I can't really verify the problem or test the fix.
I managed to get my hands on a system with an AMD Venice CPU which
is supposed to support TPH, but the ACPI is missing some bits to
actually advertise it. pcie_tph_get_cpu_st() returns -EINVAL.
====================
Link: https://patch.msgid.link/20260803193135.2030368-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Unregistering IRQ affinity notifiers waits for the callback synchronously.
bnxt takes the netdev instance lock in the notifier (to restart the queue)
and cancels the work under the same lock. This may obviously deadlock.
Move the restart to the async service task. The queue restart isn't
super time sensitive. Store the new TPH tag, schedule the task.
Safely canceling the service task is already ironed out.
In bnxt_request_irq() the order of registering notifier, affinity and
initial TPH programming has to be inverted. I think it was racy
previously since user may trigger an update as soon as notifier
is installed.
There's a small known gap - if pcie_tph_get_cpu_st() fails at init
and the target tag is 0 we may miss programming the entry.
This does not seem worth fixing, the code has skip-on-failure
all over the place, anyway.
Fixes: c214410c47d6 ("bnxt_en: Add TPH support in BNXT driver")
Tested-by: Vishvambar Panth S <vishvambar.panth-s@broadcom.com>
Link: https://patch.msgid.link/20260803193135.2030368-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bnxt_request_irq() has unnecessary level of indentation.
Use continue instead. No need to re-fetch NUMA node for
each IRQ, move to the function level.
No functional changes.
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260803193135.2030368-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The TPH support must have broken aRFS in bnxt. IRQ can only have one
notifier, so installing the TPH notifier is overriding the one implicitly
installed by irq_cpu_rmap_add().
Make sure we call cpu_rmap_update() from the TPH notifier.
We need to be careful with the ordering and not free the rmap
until we unregistered the notifier. Note that moving the rmap
freeing after the early return in bnxt_free_irq() is fine -
there's no path that could leave rmap with irq_tbl being NULL.
Fixes: c214410c47d6 ("bnxt_en: Add TPH support in BNXT driver")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260803193135.2030368-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bnxt_irq_affinity_notify() copies into irq->cpu_mask.
Cancel the notifier before freeing irq->cpu_mask.
Fixes: c214410c47d6 ("bnxt_en: Add TPH support in BNXT driver")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260803193135.2030368-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
apply_wqattrs_commit() updates node_nr_active->max unconditionally.
wq->node_nr_active[] is only allocated for unbound workqueues, so guard
the call before per-cpu workqueues start using this path.
No functional change: only unbound workqueues reach apply_wqattrs_*()
today.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
This allocates a pwq and binds it to the pool @attrs asks for.
Which pool that is becomes a property of the attrs (once per-cpu becomes
an affinity scope).
Remove the 'unbound" from the function name, given it will be bigger
than unbound.
No functional change.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The attrs are where the affinity scope lives, and a per-cpu workqueue
will need one once per-cpu becomes a scope rather than a separate
backend. Allocate them unconditionally.
wq_dump.py used a non-NULL wq->attrs as its test for an unbound
workqueue, which no longer holds; test WQ_UNBOUND there instead.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The unbound prefix says which workqueues currently have the field rather
than what it holds, and the next patch allocates it for every workqueue.
Rename it first so that change stays a single line.
tools/workqueue/wq_dump.py reads the field by name, so rename it there
too.
wq_sysfs_unbound_attrs[] keeps its name: it is the set of sysfs files
that only unbound workqueues expose.
No functional change.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
workqueue_online_cpu() and workqueue_offline_cpu() decide whether a
workqueue needs a pod affinity update by testing wq->unbound_attrs for
NULL, which is only meaningful because the attrs are allocated for
unbound workqueues alone.
Test the flag instead, so the attrs can later be allocated for every
workqueue.
No functional change.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
pwq_tryinc_nr_active() and pwq_dec_nr_active() choose between the shared
per-node nr_active and the plain per-pwq one by testing
wq_node_nr_active() for NULL.
Test the backing pool with is_percpu_pool() instead, so the accounting
follows the pool that runs the work rather than the workqueue type.
No functional change.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Add is_percpu_pool() and test the pool directly for per cpu. Convert the
other open-coded pool->cpu checks -- in put_unbound_pool(),
pool_allowed_cpus() and the workqueue watchdog -- to the same helper.
No functional change.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Move the per-cpu pwq allocation loop out of alloc_and_link_pwqs() into a
helper. The inner allocation-failure path now returns -ENOMEM and the
caller jumps to the existing enomem cleanup, equivalent to the previous
goto.
No functional change.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
