summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2026-06-09ASoC: SOF: amd: fix for ipc flags checkVijendar Mukunda
Firmware will set dsp_ack to 1 when firmware sends response for the IPC command issued by host. Similarly dsp_msg flag will be updated to 1. During ACP D0 entry, the value read from the sof_dsp_ack_write scratch flag can be uninitialized. A non-zero garbage value is treated as a pending DSP IPC ack before SOF_FW_BOOT_COMPLETE, causing a spurious "IPC reply before FW_BOOT_COMPLETE" log. Fix the condition checks for ipc flags. Fixes: 738a2b5e2cc9 ("ASoC: SOF: amd: Add IPC support for ACP IP block") Link: https://github.com/thesofproject/linux/pull/5642 Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Tested-by: Umang Jain <uajain@igalia.com> Link: https://patch.msgid.link/20260609160938.3717513-1-Vijendar.Mukunda@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2026-06-09nvme: fix crash and memory leak during invalid cdev teardownMaurizio Lombardi
In the NVMe multipath code, if nvme_add_ns_head_cdev() fails during nvme_mpath_set_live(), the error is ignored. However, during teardown, nvme_remove_head() unconditionally calls nvme_cdev_del(). This teardown asymmetry leads to a kernel panic if the character device was never successfully initialized. BUG: kernel NULL pointer dereference, address: 00000000000000d0 device_del+0x39/0x3c0 cdev_device_del+0x15/0x50 nvme_cdev_del+0xe/0x20 [nvme_core] nvme_mpath_shutdown_disk+0x38/0x60 [nvme_core] nvme_ns_remove+0x177/0x1f0 [nvme_core] nvme_remove_namespaces+0xdc/0x130 [nvme_core] nvme_do_delete_ctrl+0x71/0xd0 [nvme_core] Additionally, a memory leak exists in the nvme_cdev_add() failure path. Previously, dev_set_name() was called before ida_alloc(). If ida_alloc() subsequently failed, device_initialize() was never called, meaning put_device() could not be used to clean up the kobject, leaking the memory allocated by dev_set_name(). * Introduces the NVME_NSHEAD_CDEV_LIVE and NVME_NS_CDEV_LIVE bits to track the successful creation of the character devices. Teardown routines now check these bits before attempting deletion. * Refactor nvme_cdev_add() to accept the formatted device name as a parameter, moving dev_set_name() after the IDA allocation and immediately before device_initialize(). This ensures any internally allocated strings are safely cleaned up by put_device() upon failure. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2026-06-09Merge branch 'net-ethtool-let-ops-locked-drivers-run-without-rtnl_lock'Jakub Kicinski
Jakub Kicinski says: ==================== net: ethtool: let ops locked drivers run without rtnl_lock With the ethtool_get_link_ksettings() situation hopefully ironed out the previous series (commit 6a5d837f0ce2) let's return to the main part of the series. We have been slowly moving towards removing the rtnl_lock dependency in driver ops since the concept of "ops-locked" drivers have been introduced last year. Since last year will take the netdev instance lock before invoking any ndo or ethtool op of "ops-locked" drivers. We dipped our toes into rtnl_lock-less ops with the queue binding API. Queue stats, NAPI, and other netdev-netlink objects are also queried without holding rtnl_lock already. It's time to take the next logical step and lift the requirement from ethtool ops. The direct motivation for this patchset is that ethtool ops often involve communicating with device FW, and may take a long time to complete. Aggressive polling of device state on machines with 10+ NICs have been shown to significantly increase rtnl_lock pressure. There's a handful of areas which still need rtnl_lock (see below). I decided to convert everything to rtnl_lock-less by default, and add a set of flags which let the drivers request rtnl_lock to still be taken. I don't love this, but I'm worried that opt-in would be even more confusing. Known issues / exclusions: - qdiscs - qdisc configuration currently assumes rtnl_lock, this is mostly impacting set_channels callback. qdisc config is probably the easiest one of the exclusions to tackle, it's fairly self-contained. - features - even tho feature changes are (correctly) plumbed to the driver thru ndos they are part of ethtool uAPI. ethtool itself calls netdev_features_change() if it has spotted device feature change before vs after to the callback. Some drivers also call netdev_features_change() directly in response to various changes, e.g. setting priv flags. Since features have to propagate to upper and lower devices anything that touches features is quite hard to move from under rtnl_lock. - phylink - phylink and SFP depend on rtnl_lock today, I suspect that this is purely for historic reasons. I started poking at it and don't really see a need for a global lock. But accessing the netdev instance lock from the SFP entry points will require some attention from the phylink folks. - phydev - similar to phylink, looks quite doable. But no ops-locked driver currently has a phydev (fbnic only uses phylink) so phydev related paths retain a ASSERT_RTNL() for now. Tested on mlx5, bnxt and fbnic. ==================== Link: https://patch.msgid.link/20260605002912.3456868-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-06-09docs: net: ethtool: document ops-locked drivers and op_needs_rtnlJakub Kicinski
Catch up various bits of documentation after the locking changes. Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260605002912.3456868-13-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-06-09net: ethtool: optionally skip rtnl_lock on IOCTL pathJakub Kicinski
Convert the IOCTL path similarly to how we converted Netlink. The device lookup gets a little hairy. We could take rtnl_lock unconditionally and drop it before calling the driver (this would avoid the reference + liveness check). But I think being able to make progress even if rtnl is dead-locked is quite useful. First extra concern is handling features. List all the cmds which modify features and always take rtnl_lock. We could fold this list into ethtool_ioctl_needs_rtnl() but seems cleaner to keep ethtool_ioctl_needs_rtnl() driver-related. If a driver changed features and we were not holding rtnl_lock - warn about it. It can only happen on buggy ops locked drivers (buggy because they should have set appropriate "I need rtnl for op X" bit). Second wrinkle is the PHY ID hack which drops the locks while sleeping. Convert its static "busy" variable which used to be protected by rtnl_lock to a field in struct ethtool_netdev_state. This feature is about identifying an adapter or a port within a system, so being able to blink multiple LEDs at the same time is likely not very useful in practice. But it's the simplest fix, we can add a mutex if someone thinks a system should only be ID'ing one port at a time. Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260605002912.3456868-12-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-06-09net: ethtool: ioctl: concentrate the lockingJakub Kicinski
Add another layer of helper functions to make upcoming locking changes easier. Otherwise we'd need a pretty complex goto structure. netdev instance lock is now taken slightly sooner but that should not be an issue since rtnl_lock is already held, anyway. Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260605002912.3456868-11-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-06-09net: ethtool: optionally skip rtnl_lock in RSS context handlersJakub Kicinski
Skip rtnl_lock in RSS context handlers if device is ops-locked. Fairly trivial conversion. bnxt needed rtnl_lock for changing the main context but looks like additional contexts are fine without it. Note (for review bots?) that ethnl_ops_begin() checks whether the device is still registered. Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260605002912.3456868-10-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-06-09net: ethtool: optionally skip rtnl_lock in ethnl_act_module_fw_flash()Jakub Kicinski
Module firmware flashing reads SFF-8024 identifier bytes via .get_module_eeprom_by_page(). Other than that it modifies a bit in the netdev->ethtool struct. Both should be ops-locked at this point. Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260605002912.3456868-9-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-06-09net: ethtool: optionally skip rtnl_lock in ethnl_tsinfo_dumpit()Jakub Kicinski
ethnl_tsinfo_dumpit() iterates netdevs and per-netdev PHY topology calling ops->get_ts_info(). Switch to the "ops compat locking" helpers which take either rtnl_lock or instance lock, depending on what the device needs. Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260605002912.3456868-8-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-06-09net: ethtool: optionally skip rtnl_lock in cable test handlersJakub Kicinski
Skip rtnl_lock in cable test handlers. This is really a noop since no ops locked device supports these. Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260605002912.3456868-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-06-09net: ethtool: optionally skip rtnl_lock on Netlink path for SET opsJakub Kicinski
Make ethtool not take rtnl_lock for SET commands when operation is performed on an ops-locked driver. cfg/cfg_pending are now ops-locked, since only ethtool modifies them. Some SET driver callbacks will still need rtnl_lock, most notably those which may end up calling netdev_update_features() or the qdisc layer (via netif_set_real_num_tx_queues()). Let drivers selectively opt back into the rtnl_lock with a new bitfield in ops. We need two helpers since Netlink and ioctl cmds have different values. Keep the helpers side by side in common.h to make sure they get updated together, even tho they will only get called from ioctl.c and netlink.c. SET commands which don't use ethnl_default_set_doit() are converted by subsequent commits. Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260605002912.3456868-6-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-06-09net: ethtool: optionally skip rtnl_lock on Netlink path for GET opsJakub Kicinski
ethnl_default_doit() and ethnl_default_dump_one() are both used exclusively for GET callbacks (former to get info for a single device or get global strings). ops-locked devices don't need rtnl_lock for GET callbacks, stop taking it. Introduce an opt-out mechanism for devices which use phylink (fbnic) since phylink currently depends on rtnl_lock protection. Subsequent patches will add more exceptions, anyway. Practically the new helpers for judging if command needs rtnl_lock could also call netdev_need_ops_lock() but I find that it makes the code in the callers slightly less obvious. Add a helper for IOCTLs already, even tho it's unused so that we can keep them in sync as the series progresses. This is the first user-visible step of moving ethtool ops out from under rtnl. Subsequent patches do the same for SET ops, as well as the ioctl path. Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260605002912.3456868-5-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-06-09net: ethtool: make dev->hwprov ops-protectedJakub Kicinski
dev->hwprov tracks the active hwtstamp provider for the device. Make it ops protected (instance lock if the netdev driver opts into holding instance lock around callbacks, otherwise rtnl_lock). hwprov is written and read in: - drivers/net/phy/phy_device.c phydev and ops protection don't currently mix, add a comment - net/ethtool/ as of now holds both rtnl lock and ops lock, this one will soon only hold one lock or the other read in: - net/core/dev_ioctl.c holds both rtnl lock and ops lock - net/core/timestamping.c RCU reader The new netdev_ops_lock_dereference() helper does not have "compat" in the name. The name would be quite long and I think in this case it should be obvious that we need _a_ lock. netdev_lock_dereference() already exists and means dev->lock is always expected. Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260605002912.3456868-4-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-06-09net: ethtool: relax ethnl_req_get_phydev() locking assertionJakub Kicinski
phydev <> netdev linking and lifecycle depends on rtnl_lock. We want to switch to instance locks for most ethtool ops. Let's add an assert that ops locked devices don't use phydev today. If one does we can either opt the phy ops out of being purely ops locked, or do deeper surgery to make phy locking ops-compatible. I don't think there's any fundamental challenge to make that work. Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260605002912.3456868-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-06-09net: ethtool: serialize broadcast notification sequence allocationJakub Kicinski
ethnl_bcast_seq is a global counter stamped into the nlmsg_seq field of every multicast notification, allowing userspace to detect dropped messages. Today the ordering is achieved by using rtnl_lock(). Moving forward we will want ethtool ops to run under just the netdev instance lock so to establish ordering we need a separate lock for notifications. With the netdev instance locks operations on different devices may bypass each other but the expectation is that it should not matter. What we need to prevent is: - notification IDs getting out of order - operations on one device getting out of order For simplicity defer allocating the ID of the notification right before the notification is delivered. This removes the need for special handling in ethnl_rss_create_send_ntf(). Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260605002912.3456868-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-06-09igc: skip RX timestamp header for frame preemption verificationKhaiWenTan
When RX hardware timestamping is enabled, a 16-byte inline timestamp header is added to the start of the packet buffer, causing FPE handshake verification to fail. Because an incorrect packet buffer is passed to igc_fpe_handle_mpacket(), the mem_is_zero() check inspects the timestamp metadata instead of the actual mPacket payload. As a result, valid Verify/Response mPackets can be missed when inline RX timestamps are present. Pass pktbuf + pkt_offset to igc_fpe_handle_mpacket() so it inspects the actual mPacket payload instead of the timestamp header. Fixes: 5422570c0010 ("igc: add support for frame preemption verification") Co-developed-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com> Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com> Signed-off-by: KhaiWenTan <khai.wen.tan@linux.intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2026-06-09ixgbe: do not configure xps for XDP queuesLarysa Zaremba
netif_set_xps_queue() should not be called for an XDP Tx queue, since such queues are not netdev-exposed. On systems with number of CPUs >=64, on E610 adapter, netdev is configured with maximum number queue pairs being 63 (due to MSI-X assignment), but configuring XDP results in 64 XDP queues. So, during XDP program load, when netif_set_xps_queue() is called for the last XDP queue, we get a WARNING with a call trace and KASAN report afterwards (if enabled). [ 2012.699800] WARNING: net/core/dev.c:2854 at __netif_set_xps_queue+0x116a/0x1e40, CPU#36: xdpsock/103668 [...] [ 2012.700029] RIP: 0010:__netif_set_xps_queue+0x116a/0x1e40 [ 2012.700035] Code: b6 34 06 48 89 f8 83 e0 07 83 c0 01 40 38 f0 7c 09 40 84 f6 0f 85 03 0a 00 00 0f b7 44 24 40 66 43 89 44 6a 18 e9 01 fb ff ff <0f> 0b e9 f2 ee ff ff 44 8b 44 24 44 45 85 c0 74 50 4d 85 e4 0f 84 [ 2012.700040] RSP: 0018:ffff8882369aeb28 EFLAGS: 00010246 [ 2012.700046] RAX: 0000000000000000 RBX: 000000000000003f RCX: 0000000000000000 [ 2012.700050] RDX: 1ffff1111da3d891 RSI: ffff888120e34250 RDI: ffff8888ed1ec488 [ 2012.700054] RBP: ffff888913281560 R08: 0000000000000000 R09: ffff8888ed1ec000 [ 2012.700058] R10: ffff8888a2e83180 R11: 0000000000000000 R12: 0000000000007fa8 [ 2012.700061] R13: 000000000000003f R14: ffff888120e34854 R15: ffff8889132817c8 [ 2012.700065] FS: 00007fc8ea9ff740(0000) GS:ffff88884cefe000(0000) knlGS:0000000000000000 [ 2012.700069] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2012.700073] CR2: 00007f81c8000020 CR3: 00000002299f8006 CR4: 00000000007726f0 [ 2012.700077] PKRU: 55555554 [ 2012.700080] Call Trace: [ 2012.700084] <TASK> [ 2012.700087] ? ktime_get+0x61/0x150 [ 2012.700097] ? usleep_range_state+0x133/0x1b0 [ 2012.700108] ? __pfx_usleep_range_state+0x10/0x10 [ 2012.700114] netif_set_xps_queue+0x31/0x50 [ 2012.700119] ixgbe_configure_tx_ring+0x472/0x920 [ixgbe] [...] [ 2012.700486] ixgbe_xdp+0x38f/0x750 [ixgbe] [...] [ 2012.701094] BUG: KASAN: slab-out-of-bounds in __netif_set_xps_queue+0x1ac5/0x1e40 [ 2012.701100] Write of size 4 at addr ffff88888d43cff8 by task xdpsock/103668 Skip XPS configuration for XDP Tx queues. Fixes: 33fdc82f0883 ("ixgbe: add support for XDP_TX action") Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Patryk Holda <patryk.holda@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2026-06-09idpf: add padding to PTP virtchnl structuresPrzemyslaw Korba
Add padding to virtchnl2 PTP structures to match the Control Plane expected message sizes: * virtchnl2_ptp_get_dev_clk_time: 8 -> 16 bytes * virtchnl2_ptp_set_dev_clk_time: 8 -> 16 bytes * virtchnl2_ptp_get_cross_time: 16 -> 24 bytes The FW expects the above sizes and PTP negotiation fails due to the mismatch. Previously neither the FW nor the driver checked message/reply sizes strictly, so the problem appeared only after recent validation improvements. reproduction steps: ptp4l -i <pf> -m Observe: failed to open /dev/ptp0: Permission denied Fixes: bf27283ba594 ("virtchnl: add PTP virtchnl definitions") Cc: stable@vger.kernel.org Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Przemyslaw Korba <przemyslaw.korba@intel.com> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2026-06-09PCI: mediatek: Fix IRQ domain leak when port fails to enableManivannan Sadhasivam
When mtk_pcie_enable_port() fails, mtk_pcie_port_free() removes the port from pcie->ports and frees the port structure. However, the IRQ domains set up earlier by mtk_pcie_init_irq_domain() are never freed. Fix this by refactoring mtk_pcie_irq_teardown() into a per-port helper, mtk_pcie_irq_teardown_port(), and calling it from mtk_pcie_setup() when mtk_pcie_enable_port() fails. Since the IRQ teardown must only happen in the probe error path (during resume, child devices may have active MSI mappings and the NOIRQ context prohibits sleeping locks), mtk_pcie_enable_port() is changed to return an error code so callers can distinguish the two paths and act accordingly. This issue was reported by Sashiko while reviewing the EcoNet EN7528 SoC support series. Fixes: b099631df160 ("PCI: mediatek: Add controller support for MT2712 and MT7622") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Cc: stable@vger.kernel.org # 5.10 Cc: Caleb James DeLisle <cjd@cjdns.fr> Link: https://patch.msgid.link/20260521174617.17692-1-mani@kernel.org
2026-06-09Merge tag 'microchip-dt64-7.2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt Microchip ARM64 device tree updates for v7.2 This update includes: - the device tree node for the OTP controller on LAN9691 SoC * tag 'microchip-dt64-7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: arm64: dts: microchip: lan969x: add OTP node Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2026-06-09Merge tag 'at91-dt-7.2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt Microchip AT91 device tree updates for v7.2 This update includes: - I3C controller device tree node for SAMA7D65 SoC * tag 'at91-dt-7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: microchip: add I3C controller Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2026-06-09cxl: Fix CXL_HEADERLOG_SIZE to match RAS Capability sizeTerry Bowman
The CXL r4.0 8.2.4.17.7 RAS Capability Structure has total length 0x58 bytes (CXL_RAS_CAPABILITY_LENGTH); the Header Log occupies the trailing 64 bytes at offset 0x18. CXL_HEADERLOG_SIZE was defined as SZ_512, eight times the actual on-device size. header_log_copy() reads CXL_HEADERLOG_SIZE_U32 (128) dwords from the RAS capability iomap, overrunning the 88-byte mapping by 448 bytes. The cxl_aer_uncorrectable_error trace event memcpy()s CXL_HEADERLOG_SIZE (512) bytes from its source. For the CPER caller the source is struct cxl_ras_capability_regs::header_log[16] (64 bytes) embedded in a stack-local cxl_cper_prot_err_work_data, so the memcpy reads 448 bytes of kernel stack into the trace event ring buffer where userspace can read it via tracefs. Set CXL_HEADERLOG_SIZE to 64 and derive CXL_HEADERLOG_SIZE_U32 from it, bringing all iomap readers into agreement on 16 dwords. Userspace tools such as rasdaemon have grown a dependency on the buggy 512-byte (128 u32) header_log layout in the cxl_aer_uncorrectable_error trace event. Add CXL_HEADERLOG_TRACE_SIZE_U32 = 128 and use it for the trace event __array and its memcpy to preserve that ABI. Both callers now pass a zero-filled u32[CXL_HEADERLOG_TRACE_SIZE_U32] staging buffer with only the first CXL_HEADERLOG_SIZE_U32 (16) entries populated from hardware; the remaining 112 u32s are zero-padded, keeping the 512-byte trace ring buffer layout intact. [ dj: Replaced 64 with SZ_64 per RichardC ] Fixes: 36f257e3b0ba ("acpi/ghes, cxl/pci: Process CXL CPER Protocol Errors") Fixes: 2905cb5236cb ("cxl/pci: Add (hopeful) error handling support") Cc: stable@vger.kernel.org Reported-by: Sashiko Signed-off-by: Terry Bowman <terry.bowman@amd.com> Reviewed-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Ben Cheatham <benjamin.cheatham@amd.com> Reviewed-by: Richard Cheng <icheng@nvidia.com> Link: https://patch.msgid.link/20260605180610.2249458-1-terry.bowman@amd.com Signed-off-by: Dave Jiang <dave.jiang@intel.com>
2026-06-09Merge tag 'omap-for-v7.2/dt-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into soc/dt ARM: dts: OMAP updates for v7.2 Minor DTS fixes & updates * tag 'omap-for-v7.2/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap: ARM: dts: dm8168-evm: Set stdout-path to uart3 arch: arm: dts: cpcap-mapphone: Add audio-codec jack detection interrupts arch: arm: dts: cpcap-mapphone: Set VAUDIO regulator always-on ARM: dts: ti/omap: omap4-epson-embt2ws: fix typo in iio device property ARM: dts: am335x-sl50: Fix audio bitclock and frame master endpoint Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2026-06-09nvmet: fix refcount leak in nvmet_sq_create()Wentao Liang
In nvmet_sq_create(), a reference on the ctrl is taken via kref_get_unless_zero() before calling nvmet_check_sqid(). If nvmet_check_sqid() fails, the function returns the error directly without releasing the reference, leading to a leak. Fix this by jumping to the "ctrl_put" label, which already performs the necessary nvmet_ctrl_put(ctrl). This ensures the reference is properly released on this error path. Cc: stable@vger.kernel.org Fixes: 1eb380caf527 ("nvmet: Introduce nvmet_sq_create() and nvmet_cq_create()") Signed-off-by: Wentao Liang <vulab@iscas.ac.cn> Signed-off-by: Keith Busch <kbusch@kernel.org>
2026-06-09Merge tag 'mvebu-arm-7.2-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/arm mvebu arm for 7.2 (part 1) Orion5x: Replace machine_is_mss2() with of_machine_is_compatible() in mss2_pci_init() mvebu_v5_defconfig: Remove stale MACH_LINKSTATION_LSCHL reference Armada 370: Simplify of_node_put calls and drop redundant NULL checks * tag 'mvebu-arm-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: ARM: orion5x: update board check in mss2_pci_init() to use the DT arm: mvebu_v5_defconfig: remove stale MACH_LINKSTATION_LSCHL reference ARM: mvebu: simplify of_node_put calls ARM: mvebu: drop unnecessary NULL check Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2026-06-09PCI: meson: Add missing remove callbackShuvam Pandey
meson_pcie_probe() powers on the PHY and registers the DesignWare host bridge with dw_pcie_host_init(), but the driver has no remove callback. On driver unbind or module unload, the driver core therefore proceeds to devres cleanup without first unregistering the host bridge or powering off the PHY. Add a remove callback that deinitializes the DesignWare host bridge and powers off the PHY while device-managed resources are still valid. Fixes: 9c0ef6d34fdb ("PCI: amlogic: Add the Amlogic Meson PCIe controller driver") Signed-off-by: Shuvam Pandey <shuvampandey1@gmail.com> Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Link: https://patch.msgid.link/1a0c86ab264cdc1c79c917e984b90991af51d827.1779123847.git.shuvampandey1@gmail.com
2026-06-09arm64: dts: aspeed: Add initial AST27xx SoC device treeRyan Chen
Add initial device tree support for the ASPEED AST27xx family, the 8th-generation Baseboard Management Controller (BMC) SoCs. AST27xx SOC Family - https://www.aspeedtech.com/server_ast2700/ - https://www.aspeedtech.com/server_ast2720/ - https://www.aspeedtech.com/server_ast2750/ The AST27xx features a dual-SoC architecture consisting of two dies, referred to as SoC0 and SoC1 - interconnected through an internal proprietary bus. Both SoCs share the same address decoding scheme, while each maintains independent clock and reset domains. - SoC0 (CPU die): contains a quad-core Cortex-A35 cluster and two Cortex-M4 cores, along with high-speed peripherals. - SoC1 (I/O die): includes the BootMCU (responsible for system boot) and its own clock/reset domains low-speed peripherals. The device tree describes the SoC0 and SoC1 domains and their peripheral layouts. Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com> Link: https://lore.kernel.org/r/20260609-upstream_ast2700-v9-3-f631752f0cb1@aspeedtech.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2026-06-09PCI: meson: Propagate devm_add_action_or_reset() failureShuvam Pandey
meson_pcie_probe_clock() enables a clock and then registers a devres action to disable it during teardown. If devm_add_action_or_reset() fails, it runs the action immediately, disabling the clock. The return value is currently ignored, so on that failure path, meson_pcie_probe_clock() returns the disabled clock and probe continues. Return the error so the existing probe error path unwinds normally. Fixes: 9c0ef6d34fdbf ("PCI: amlogic: Add the Amlogic Meson PCIe controller driver") Signed-off-by: Shuvam Pandey <shuvampandey1@gmail.com> Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patch.msgid.link/177909148011.9588.6639767953842842291@gmail.com
2026-06-09btrfs: fix use-after-free after relocation failure with concurrent COWFilipe Manana
If we get a failure during relocation, before we update all the extent buffers that have file extent items pointing to extents from the block group being relocated, we can trigger a user-after-free on the reloc control structure (fs_info->reloc_control) if we have a concurrent task that is COWing a subvolume leaf. This happens like this: 1) Relocation of data block group X starts; 2) Relocation changes its state to UPDATE_DATA_PTRS; 3) A task doing a rename for example, COWs leaf A from a subvolume tree and ends up at btrfs_reloc_cow_block() and extracts fs_info->reloc_ctl into a local variable, which then passes to replace_file_extents(); 4) The relocation task gets an error and under the label 'out_put_bg' in btrfs_relocate_block_group() calls free_reloc_control(), which frees the reloc control structure that the rename task is using; 5) The rename task triggers a use-after-free on the reloc control structure that was just freed. Syzbot reported this recently, with the following stack trace: [ 88.389822][ T5325] BTRFS error (device loop0 state A): Transaction aborted (error -5) [ 88.389842][ T5325] BTRFS: error (device loop0 state A) in cleanup_transaction:2067: errno=-5 IO failure [ 88.389864][ T5325] BTRFS info (device loop0 state EA): forced readonly [ 88.392277][ T5324] BTRFS: error (device loop0 state EA) in btrfs_sync_log:3572: errno=-5 IO failure [ 88.396630][ T5325] BTRFS info (device loop0 state EA): balance: ended with status: -5 [ 88.400135][ T5346] ================================================================== [ 88.400148][ T5346] BUG: KASAN: slab-use-after-free in replace_file_extents+0x85f/0x1590 [ 88.400288][ T5346] Read of size 8 at addr ffff888012312010 by task syz.0.0/5346 [ 88.400299][ T5346] [ 88.400306][ T5346] CPU: 0 UID: 0 PID: 5346 Comm: syz.0.0 Not tainted syzkaller #0 PREEMPT(full) [ 88.400319][ T5346] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 88.400325][ T5346] Call Trace: [ 88.400331][ T5346] <TASK> [ 88.400336][ T5346] dump_stack_lvl+0xe8/0x150 [ 88.400351][ T5346] print_address_description+0x55/0x1e0 [ 88.400364][ T5346] ? replace_file_extents+0x85f/0x1590 [ 88.400378][ T5346] print_report+0x58/0x70 [ 88.400389][ T5346] kasan_report+0x117/0x150 [ 88.400405][ T5346] ? replace_file_extents+0x85f/0x1590 [ 88.400420][ T5346] replace_file_extents+0x85f/0x1590 [ 88.400440][ T5346] ? __pfx_replace_file_extents+0x10/0x10 [ 88.400452][ T5346] ? update_ref_for_cow+0xa71/0x1270 [ 88.400473][ T5346] btrfs_force_cow_block+0xa4d/0x2450 [ 88.400492][ T5346] ? __pfx_btrfs_force_cow_block+0x10/0x10 [ 88.400508][ T5346] ? __pfx_btrfs_get_32+0x10/0x10 [ 88.400523][ T5346] btrfs_cow_block+0x3c4/0xa90 [ 88.400542][ T5346] push_leaf_left+0x2ac/0x4a0 [ 88.400561][ T5346] split_leaf+0xd16/0x12e0 [ 88.400574][ T5346] ? btrfs_bin_search+0x924/0xc70 [ 88.400592][ T5346] ? __pfx_split_leaf+0x10/0x10 [ 88.400602][ T5346] ? leaf_space_used+0x177/0x1e0 [ 88.400618][ T5346] ? btrfs_leaf_free_space+0x14a/0x2f0 [ 88.400634][ T5346] btrfs_search_slot+0x2641/0x2d20 [ 88.400654][ T5346] ? __pfx_btrfs_search_slot+0x10/0x10 [ 88.400669][ T5346] ? rcu_is_watching+0x15/0xb0 [ 88.400681][ T5346] ? trace_kmem_cache_alloc+0x29/0xe0 [ 88.400694][ T5346] btrfs_insert_empty_items+0x9c/0x190 [ 88.400711][ T5346] btrfs_insert_inode_ref+0x229/0xcb0 [ 88.400724][ T5346] ? __pfx_btrfs_insert_inode_ref+0x10/0x10 [ 88.400736][ T5346] ? __pfx_btrfs_qgroup_convert_reserved_meta+0x10/0x10 [ 88.400751][ T5346] ? btrfs_record_root_in_trans+0x124/0x180 [ 88.400767][ T5346] ? start_transaction+0x8a0/0x1820 [ 88.400778][ T5346] ? btrfs_set_inode_index+0x5e/0x100 [ 88.400787][ T5346] btrfs_rename2+0x17bb/0x40d0 [ 88.400800][ T5346] ? check_noncircular+0xda/0x150 [ 88.400814][ T5346] ? add_lock_to_list+0xc7/0x100 [ 88.400828][ T5346] ? __pfx_btrfs_rename2+0x10/0x10 [ 88.400842][ T5346] ? lockdep_hardirqs_on+0x7a/0x110 [ 88.400901][ T5346] ? lock_acquire+0x221/0x350 [ 88.400915][ T5346] ? down_write_nested+0x174/0x210 [ 88.400931][ T5346] ? __pfx_down_write_nested+0x10/0x10 [ 88.400941][ T5346] ? do_raw_spin_unlock+0x4d/0x210 [ 88.400952][ T5346] ? try_break_deleg+0x5b/0x180 [ 88.400963][ T5346] ? __pfx_btrfs_rename2+0x10/0x10 [ 88.400973][ T5346] vfs_rename+0xa96/0xeb0 [ 88.400992][ T5346] ? __pfx_vfs_rename+0x10/0x10 [ 88.401010][ T5346] ovl_fill_super+0x46b7/0x5e20 [ 88.401030][ T5346] ? __pfx_ovl_fill_super+0x10/0x10 [ 88.401042][ T5346] ? xas_create+0x1902/0x1b90 [ 88.401060][ T5346] ? __pfx___mutex_trylock_common+0x10/0x10 [ 88.401076][ T5346] ? trace_contention_end+0x3d/0x140 [ 88.401094][ T5346] ? shrinker_register+0x124/0x230 [ 88.401111][ T5346] ? __mutex_unlock_slowpath+0x1be/0x6f0 [ 88.401127][ T5346] ? shrinker_register+0x61/0x230 [ 88.401143][ T5346] ? __pfx___mutex_lock+0x10/0x10 [ 88.401158][ T5346] ? __pfx___mutex_unlock_slowpath+0x10/0x10 [ 88.401177][ T5346] ? __raw_spin_lock_init+0x45/0x100 [ 88.401196][ T5346] ? sget_fc+0x962/0xa40 [ 88.401208][ T5346] ? __pfx_set_anon_super_fc+0x10/0x10 [ 88.401222][ T5346] ? __pfx_ovl_fill_super+0x10/0x10 [ 88.401241][ T5346] get_tree_nodev+0xbb/0x150 [ 88.401257][ T5346] vfs_get_tree+0x92/0x2a0 [ 88.401272][ T5346] do_new_mount+0x341/0xd30 [ 88.401283][ T5346] ? apparmor_capable+0x126/0x170 [ 88.401301][ T5346] ? __pfx_do_new_mount+0x10/0x10 [ 88.401311][ T5346] ? ns_capable+0x89/0xe0 [ 88.401322][ T5346] ? path_mount+0x690/0x10e0 [ 88.401333][ T5346] ? user_path_at+0xd4/0x160 [ 88.401346][ T5346] __se_sys_mount+0x31d/0x420 [ 88.401358][ T5346] ? __pfx___se_sys_mount+0x10/0x10 [ 88.401370][ T5346] ? __x64_sys_mount+0x20/0xc0 [ 88.401381][ T5346] ? entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 88.401391][ T5346] do_syscall_64+0x15f/0xf80 [ 88.401403][ T5346] ? trace_irq_disable+0x3b/0x140 [ 88.401413][ T5346] ? clear_bhb_loop+0x40/0x90 [ 88.401421][ T5346] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 88.401429][ T5346] RIP: 0033:0x7fa1ff79ce59 [ 88.401436][ T5346] Code: ff c3 66 (...) [ 88.401443][ T5346] RSP: 002b:00007fa2005affe8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 [ 88.401456][ T5346] RAX: ffffffffffffffda RBX: 00007fa1ffa16180 RCX: 00007fa1ff79ce59 [ 88.401464][ T5346] RDX: 0000200000000100 RSI: 0000200000002240 RDI: 0000000000000000 [ 88.401474][ T5346] RBP: 00007fa1ff832d6f R08: 0000200000000440 R09: 0000000000000000 [ 88.401481][ T5346] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [ 88.401488][ T5346] R13: 00007fa1ffa16218 R14: 00007fa1ffa16180 R15: 00007ffc734fba78 [ 88.401500][ T5346] </TASK> [ 88.401506][ T5346] [ 88.401510][ T5346] Allocated by task 5325: [ 88.401516][ T5346] kasan_save_track+0x3e/0x80 [ 88.401529][ T5346] __kasan_kmalloc+0x93/0xb0 [ 88.401542][ T5346] __kmalloc_cache_noprof+0x31c/0x660 [ 88.401554][ T5346] btrfs_relocate_block_group+0x217/0xc40 [ 88.401568][ T5346] btrfs_relocate_chunk+0x115/0x820 [ 88.401577][ T5346] __btrfs_balance+0x1db0/0x2ae0 [ 88.401587][ T5346] btrfs_balance+0xaf3/0x11b0 [ 88.401596][ T5346] btrfs_ioctl_balance+0x3d3/0x610 [ 88.401612][ T5346] __se_sys_ioctl+0xfc/0x170 [ 88.401626][ T5346] do_syscall_64+0x15f/0xf80 [ 88.401640][ T5346] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 88.401650][ T5346] [ 88.401653][ T5346] Freed by task 5325: [ 88.401659][ T5346] kasan_save_track+0x3e/0x80 [ 88.401671][ T5346] kasan_save_free_info+0x46/0x50 [ 88.401680][ T5346] __kasan_slab_free+0x5c/0x80 [ 88.401692][ T5346] kfree+0x1c5/0x640 [ 88.401703][ T5346] btrfs_relocate_block_group+0x95d/0xc40 [ 88.401715][ T5346] btrfs_relocate_chunk+0x115/0x820 [ 88.401724][ T5346] __btrfs_balance+0x1db0/0x2ae0 [ 88.401733][ T5346] btrfs_balance+0xaf3/0x11b0 [ 88.401742][ T5346] btrfs_ioctl_balance+0x3d3/0x610 [ 88.401757][ T5346] __se_sys_ioctl+0xfc/0x170 [ 88.401770][ T5346] do_syscall_64+0x15f/0xf80 [ 88.401785][ T5346] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 88.401795][ T5346] [ 88.401798][ T5346] The buggy address belongs to the object at ffff888012312000 [ 88.401798][ T5346] which belongs to the cache kmalloc-2k of size 2048 [ 88.401807][ T5346] The buggy address is located 16 bytes inside of [ 88.401807][ T5346] freed 2048-byte region [ffff888012312000, ffff888012312800) [ 88.401819][ T5346] [ 88.401822][ T5346] The buggy address belongs to the physical page: [ 88.401829][ T5346] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x12310 [ 88.401840][ T5346] head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 88.401849][ T5346] flags: 0xfff00000000040(head|node=0|zone=1|lastcpupid=0x7ff) [ 88.401860][ T5346] page_type: f5(slab) [ 88.401871][ T5346] raw: 00fff00000000040 ffff88801ac42000 dead000000000100 dead000000000122 [ 88.401881][ T5346] raw: 0000000000000000 0000000800080008 00000000f5000000 0000000000000000 [ 88.401892][ T5346] head: 00fff00000000040 ffff88801ac42000 dead000000000100 dead000000000122 [ 88.401902][ T5346] head: 0000000000000000 0000000800080008 00000000f5000000 0000000000000000 [ 88.401913][ T5346] head: 00fff00000000003 fffffffffffffe01 00000000ffffffff 00000000ffffffff [ 88.401923][ T5346] head: ffffffffffffffff 0000000000000000 00000000ffffffff 0000000000000008 [ 88.401929][ T5346] page dumped because: kasan: bad access detected [ 88.401935][ T5346] page_owner tracks the page as allocated [ 88.401941][ T5346] page last allocated via order 3, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 9, tgid 9 (kworker/0:0), ts 83905464494, free_ts 83674944822 [ 88.401961][ T5346] post_alloc_hook+0x231/0x280 [ 88.401975][ T5346] get_page_from_freelist+0x24ba/0x2540 [ 88.401990][ T5346] __alloc_frozen_pages_noprof+0x18d/0x380 [ 88.402004][ T5346] allocate_slab+0x77/0x660 [ 88.402019][ T5346] refill_objects+0x339/0x3d0 [ 88.402033][ T5346] __pcs_replace_empty_main+0x321/0x720 [ 88.402043][ T5346] __kmalloc_node_track_caller_noprof+0x572/0x7b0 [ 88.402055][ T5346] __alloc_skb+0x2c1/0x7d0 [ 88.402067][ T5346] mld_newpack+0x14c/0xc90 [ 88.402080][ T5346] add_grhead+0x5a/0x2a0 [ 88.402093][ T5346] add_grec+0x1452/0x1740 [ 88.402105][ T5346] mld_ifc_work+0x6e6/0xe70 [ 88.402116][ T5346] process_scheduled_works+0xb5d/0x1860 [ 88.402127][ T5346] worker_thread+0xa53/0xfc0 [ 88.402138][ T5346] kthread+0x389/0x470 [ 88.402150][ T5346] ret_from_fork+0x514/0xb70 [ 88.402161][ T5346] page last free pid 5282 tgid 5282 stack trace: [ 88.402168][ T5346] __free_frozen_pages+0xbc7/0xd30 [ 88.402180][ T5346] __slab_free+0x274/0x2c0 [ 88.402191][ T5346] qlist_free_all+0x99/0x100 [ 88.402201][ T5346] kasan_quarantine_reduce+0x148/0x160 [ 88.402211][ T5346] __kasan_slab_alloc+0x22/0x80 [ 88.402221][ T5346] __kmalloc_cache_noprof+0x2ba/0x660 [ 88.402231][ T5346] kernfs_fop_open+0x3f0/0xda0 [ 88.402253][ T5346] do_dentry_open+0x785/0x14e0 [ 88.402262][ T5346] vfs_open+0x3b/0x340 [ 88.402270][ T5346] path_openat+0x2e08/0x3860 [ 88.402281][ T5346] do_file_open+0x23e/0x4a0 [ 88.402292][ T5346] do_sys_openat2+0x113/0x200 [ 88.402300][ T5346] __x64_sys_openat+0x138/0x170 [ 88.402309][ T5346] do_syscall_64+0x15f/0xf80 [ 88.402326][ T5346] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 88.402336][ T5346] [ 88.402339][ T5346] Memory state around the buggy address: [ 88.402345][ T5346] ffff888012311f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 88.402352][ T5346] ffff888012311f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 88.402359][ T5346] >ffff888012312000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 88.402365][ T5346] ^ [ 88.402370][ T5346] ffff888012312080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 88.402380][ T5346] ffff888012312100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 88.402385][ T5346] ================================================================== Fix this by: 1) Making the reloc control structure ref counted; 2) Make revery place that access fs_info->reloc_ctl outside the relocation code, which at the moment it's only replace_file_extents() and btrfs_init_reloc_root(), get a reference count on the structure. There's also btrfs_update_reloc_root() that is called outside the relocation code, but this case is safe because it's only called in the transaction commit path while under the fs_info->reloc_mutex protection, but nevertheless grab a reference to make the code more consistent and avoid false alerts from AI reviews; 3) Add a spinlock to protect fs_info->reloc_ctl, since we can not take the fs_info->reloc_mutex as that would cause a deadlock since that lock is taken in the transaction commit path. That spinlock is taken before setting fs_info->reloc_ctl to an allocated structure, setting it to NULL and reading fs_info->reloc_ctl; 4) Make sure the structure is freed only when its reference count drops to zero. Reported-by: syzbot+0eea49bba18051dea35e@syzkaller.appspotmail.com Link: https://lore.kernel.org/linux-btrfs/6a1df323.bb0696ed.125a22.000a.GAE@google.com/ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2026-06-09btrfs: move WARN_ON on unexpected error in __add_tree_block()Filipe Manana
There's no point in having the WARN_ON(1) inside the if statement for the unexpected error. Move it into the if statement's condition, which brings a couple benefits: 1) It marks the branch as unlikely, hinting the compiler to generate better code; 2) The WARN_ON() produces a stack trace after the dumped leaf and error message which can hide that more important information in case we get a truncated dmesg/syslog. Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2026-06-09btrfs: move locking into btrfs_get_reloc_bg_bytenr()Filipe Manana
It does not make sense for the single caller to have the responsability to lock the relocation mutex before calling the function and then have the function to assert the lock is held. As this is a function in relocation.c, move the locking details into it. Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2026-06-09btrfs: lzo: reject compressed segment that overflows the compressed inputWeiming Shi
lzo_decompress_bio() validates each on-disk segment length seg_len only against the workspace cbuf size, not against the compressed input size (compressed_len, the total folio bytes of the bio). A crafted extent can carry a segment whose seg_len passes the cbuf check but runs past the end of the bio, so copy_compressed_segment() walks off the last folio: get_current_folio() then returns the NULL folio from bio_next_folio(), and with CONFIG_BTRFS_ASSERT disabled (default) folio_size(NULL) faults. BUG: KASAN: null-ptr-deref in lzo_decompress_bio (fs/btrfs/lzo.c:383) Read of size 8 at addr 0000000000000000 by task kworker/u8:1/29 Workqueue: btrfs-endio simple_end_io_work kasan_report (mm/kasan/report.c:590) lzo_decompress_bio (fs/btrfs/lzo.c:383) end_bbio_compressed_read (fs/btrfs/compression.c:1065) btrfs_bio_end_io (fs/btrfs/bio.c:135) btrfs_check_read_bio (fs/btrfs/bio.c:180 fs/btrfs/bio.c:285) simple_end_io_work process_one_work worker_thread Reject any segment whose payload would extend beyond compressed_len before copying it, treating it as corruption like the other on-disk validation failures in this function. Reported-by: Xiang Mei <xmei5@asu.edu> Fixes: a6e66e6f8c1b ("btrfs: rework lzo_decompress_bio() to make it subpage compatible") Assisted-by: Claude:claude-opus-4-8 Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Weiming Shi <bestswngs@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
2026-06-09btrfs: retry faulting in the pages after a zero sized short direct writeQu Wenruo
Currently btrfs_direct_write() will not try to fault in the pages, but directly fall back to buffered writes, if the first page of the buffer can not be faulted in. For example, during generic/362 with nodatasum mount option, there is a write at file offset 0, length PAGE_SIZE, and the page is not faulted in. Then we go the following callchain and directly fall back to buffered IO: btrfs_direct_write() |- btrfs_dio_write() |- __iomap_dio_rw() | |- iomap_iter() | | |- btrfs_dio_iomap_begin() | | Now an ordered extent is allocated for the 4K write. | | | |- iomi.status = iomap_dio_iter() | | Where iomap_dio_iter() returned -EFAULT. | | | |- ret = iomap_iter() | | |- btrfs_dio_iomap_end() | | | | return -ENOTBLK | | |- return -ENOTBLK | |- if (ret == -ENOTBLK) { ret = 0; } | Now the return value is reset to 0. | |- ret = iomap_dio_complete() | Since no byte is submitted, @ret is now zero. | |- if (iov_iter_count() > 0 && (ret == -EFAULT || ret > 0)) | @ret is zero, thus not meeting the above retry condition | |- Fallback to buffered Just slightly loosen the condition to allow retry faulting in pages after a zero sized short write. Unlike the previous two bug fixes, this one is not really cause any real bug, but only reducing the chance to do zero-copy direct IO. Thus it doesn't really require stable-CC nor fixes-tag. Reviewed-by: Boris Burkov <boris@bur.io> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2026-06-09btrfs: fix incorrect buffered IO fallback for append direct writesQu Wenruo
[BUG] With the previous bug of short direct writes fixed, test case generic/362 (*) still fails with the following error with nodatasum mount option: generic/362 0s ... - output mismatch (see /home/adam/xfstests/results//generic/362.out.bad) - output mismatch (see /home/adam/xfstests/results//generic/362.out.bad) --- tests/generic/362.out 2024-08-24 15:31:37.200000000 +0930 +++ /home/adam/xfstests/results//generic/362.out.bad 2026-05-27 10:13:09.072485767 +0930 @@ -1,2 +1,3 @@ QA output created by 362 +Wrong file size after first write, got 8192 expected 4096 Silence is golden ... *: If the test case has been executed before with default data checksum, the failure will not reproduce. Need the following fix to make it reliably reproducible: https://lore.kernel.org/linux-btrfs/20260528111659.87113-1-wqu@suse.com/ [CAUSE] Inside btrfs_dio_iomap_begin() for a direct write, we increase the isize if it's beyond the current isize. But if the direct io finished short, we do not revert the isize to the previous value nor to the short write end. Then if we need to fall back to buffered writes, and the write has IOCB_APPEND flag, then the buffered write will be positioned at the incorrect isize. The call chain looks like this: btrfs_direct_write(pos=0, length=4K) |- __iomap_dio_rw() | |- iomap_iter() | | |- btrfs_dio_iomap_begin() | | |- btrfs_get_blocks_direct_write() | | |- i_size_write() | | Which updates the isize to the write end (4K). | | | |- iomap_dio_iter() | | Failed with -EFAULT on the first page. | | | |- iomap_iter() | | |- btrfs_dio_iomap_end() | | Detects a short write, return -ENOTBLK | |- if (ret == -ENOTBLK) { ret = 0;} | Which resets the return value. | |- ret = iomap_dio_complet() | Which returns 0. | |- btrfs_buffered_write(iocb, from); |- generic_write_checks() |- iocb->ki_pos = i_size_read() Which is still the new size (4K), other than the original isize 0. [FIX] Introduce the following btrfs_dio_data members: - old_isize - updated_isize If the direct write has enlarged the isize. Then if we got a short write, and btrfs_dio_data::updated_isize is set, revert to the correct isize based on old_isize and current file position. And here we call i_size_write() without holding an extent lock, which is a very special case that we're safe to do: - Only a single writer can be enlarging isize Enlarging isize will take the exclusive inode lock. - Buffered readers need to wait for the OE we're holding Buffered readers will lock extent and wait for OE of the folio range. Sometimes we can skip the OE wait, but since all page cache is invalidated, the OE wait can not be skipped. But I do not think this is the most elegant solution, nor covers all cases. E.g. if the bio is submitted but IO failed, we are unable to do the revert. I believe the more elegant one would be extend the EXTENT_DIO_LOCKED lifespan for direct writes, so that we can update the isize when a write beyond EOF finished successfully. However that change is too huge for a small bug fix. So only implement the minimal partial fix for now. [REASON FOR NO FIXES TAG] The bug is again very old, before commit f85781fb505e ("btrfs: switch to iomap for direct IO") we are already increasing isize without a proper rollback for short writes. Thus only a CC to stable. CC: stable@vger.kernel.org # 5.15+ Reviewed-by: Boris Burkov <boris@bur.io> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2026-06-09btrfs: fix false IO failure after falling back to buffered writeQu Wenruo
[BUG] The test case generic/362 will fail with "nodatasum" mount option (*): MOUNT_OPTIONS -- -o nodatasum /dev/mapper/test-scratch1 /mnt/scratch generic/362 0s ... - output mismatch (see /home/adam/xfstests/results//generic/362.out.bad) --- tests/generic/362.out 2024-08-24 15:31:37.200000000 +0930 +++ /home/adam/xfstests/results//generic/362.out.bad 2026-05-27 10:21:17.574771567 +0930 @@ -1,2 +1,3 @@ QA output created by 362 +First write failed: Input/output error Silence is golden ... *: If the test case has been executed before with default data checksum, the failure will not reproduce. Need the following fix to make it reliably reproducible: https://lore.kernel.org/linux-btrfs/20260528111659.87113-1-wqu@suse.com/ [CAUSE] Inside __iomap_dio_rw(), the -EFAULT/-ENOTBLK error is not directly returned. Thus we never got an error pointer from __iomap_dio_rw(). The call chain looks like this: btrfs_direct_write() |- btrfs_dio_write() |- __iomap_dio_rw() | |- iomap_iter() | | |- btrfs_dio_iomap_begin() | | Now an ordered extent is allocated for the 4K write. | | | |- iomi.status = iomap_dio_iter() | | Where iomap_dio_iter() returned -EFAULT. | | | |- ret = iomap_iter() | | |- btrfs_dio_iomap_end() | | | |- btrfs_finish_ordered_extent(uptodate = false) | | | | |- can_finish_ordered_extent() | | | | |- btrfs_mark_ordered_extent_error() | | | | |- mapping_set_error() | | | | Now the address space is marked error. | | | | return -ENOTBLK | | |- return -ENOTBLK | |- if (ret == -ENOTBLK) { ret = 0; } | Now the return value is reset to 0. | Thus no error pointer will be returned. | |- ret = iomap_dio_complete() | Since no byte is submitted, @ret is 0. | |- Fallback to buffered IO | And the buffered write finished without error | |- filemap_fdatawait_range() |- filemap_check_errors() The previous error is recorded, thus an error is returned However the buffered write is properly submitted and finished, the error is from the btrfs_finish_ordered_extent() call with @uptodate = false. [FIX] When a short dio write happened, any range that is submitted will have btrfs_extract_ordered_extent() to be called, thus the submitted range will always have an OE just covering the submitted range. The remaining OE range is never submitted, thus they should be treated as truncated, not an error. So that we can properly reclaim and not insert an unnecessary file extent item, without marking the mapping as error. Extract a helper, btrfs_mark_ordered_extent_truncated(), and utilize that helper to mark the direct IO ordered extent as truncated, so it won't cause failure for the later buffered fallback. [REASON FOR NO FIXES TAG] The bug itself is pretty old, at commit f85781fb505e ("btrfs: switch to iomap for direct IO") we're already passing @uptodate=false finishing the OE. But at that time OE with IOERR won't call mapping_set_error(), so it's not exposed. Later commit d61bec08b904 ("btrfs: mark ordered extent and inode with error if we fail to finish") finally exposed the bug, but that commit is doing a correct job, not the root cause. Anyway the bug is very old, dating back to 5.1x days, thus only CC to stable. CC: stable@vger.kernel.org # 5.15+ Reviewed-by: Boris Burkov <boris@bur.io> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2026-06-09btrfs: use verbose assertions in backref.cFilipe Manana
While debugging a relocation issue I hit an assertion in backref.c but it was not super useful, since it could not tell what was the unexpected value that triggered the assertion. The stack trace was this: [583246.338097] assertion failed: !cache->nr_nodes, in fs/btrfs/backref.c:3158 [583246.339588] ------------[ cut here ]------------ [583246.340573] kernel BUG at fs/btrfs/backref.c:3158! [583246.342075] Oops: invalid opcode: 0000 [#1] SMP PTI [583246.343294] CPU: 5 UID: 0 PID: 677957 Comm: btrfs Not tainted 7.1.0-rc4-btrfs-next-234+ #1 PREEMPT(full) [583246.345715] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [583246.348694] RIP: 0010:btrfs_backref_release_cache.cold+0x61/0x84 [btrfs] [583246.350759] Code: 90 d5 7c (...) [583246.354923] RSP: 0018:ffffd4fc88c93ad8 EFLAGS: 00010246 [583246.355982] RAX: 000000000000003e RBX: ffff8dec90d97020 RCX: 0000000000000000 [583246.357459] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 00000000ffffffff [583246.359517] RBP: ffff8dec8eeb78c0 R08: 0000000000000000 R09: 3fffffffffefffff [583246.361180] R10: ffffd4fc88c93970 R11: 0000000000000003 R12: ffff8decd21f3470 [583246.363184] R13: 00000000fffffffe R14: ffff8decd21f3000 R15: ffff8decd21f3000 [583246.364666] FS: 00007f9a51751400(0000) GS:ffff8df3f4255000(0000) knlGS:0000000000000000 [583246.366287] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [583246.367443] CR2: 00007f9a518ed8f5 CR3: 00000004467c8002 CR4: 0000000000370ef0 [583246.368969] Call Trace: [583246.369541] <TASK> [583246.370040] relocate_block_group+0xf2/0x520 [btrfs] [583246.371243] btrfs_relocate_block_group+0x9a9/0x22e0 [btrfs] [583246.372443] ? preempt_count_add+0x47/0xa0 [583247.532978] ? btrfs_tree_read_lock_nested+0x19/0x90 [btrfs] [583247.534520] ? mutex_lock+0x1a/0x40 [583247.602233] ? btrfs_scrub_pause+0x2e/0x120 [btrfs] [583247.603543] btrfs_relocate_chunk+0x3b/0x1a0 [btrfs] [583247.604893] btrfs_balance+0x9d5/0x1920 [btrfs] [583247.606189] ? preempt_count_add+0x69/0xa0 [583247.607030] btrfs_ioctl+0x260c/0x2a20 [btrfs] [583247.608015] ? __memcg_slab_free_hook+0x156/0x1a0 [583247.636971] __x64_sys_ioctl+0x92/0xe0 [583247.679247] do_syscall_64+0x60/0xf20 [583247.753297] ? clear_bhb_loop+0x60/0xb0 [583247.756321] entry_SYSCALL_64_after_hwframe+0x76/0x7e [583247.787018] RIP: 0033:0x7f9a5186a8db [583247.787787] Code: 00 48 89 (...) [583247.791410] RSP: 002b:00007fff2ffa6ac0 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [583247.792897] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f9a5186a8db [583247.794319] RDX: 00007fff2ffa6bb0 RSI: 00000000c4009420 RDI: 0000000000000003 [583247.795714] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [583247.797149] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff2ffa903f [583247.798685] R13: 00007fff2ffa6bb0 R14: 0000000000000002 R15: 0000000000000002 [583247.800136] </TASK> So update all simple assertions in backref.c to print out the values when they aren't testing simple boolean conditions. Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2026-06-09btrfs: print a message when a missing device re-appearsQu Wenruo
There is a bug report that fstrim crashed, and that crash is eventually pinned down to a missing device which re-appeared and screwed up callers that only checks BTRFS_DEV_STATE_MISSING, but not BTRFS_DEV_STATE_WRITEABLE nor device->bdev. A missing device re-appearing can be very tricky, as for now it will result in a device without WRITEABLE or MISSING flag, and still no bdev pointer. As the first step to enhance handling of such re-appearing missing devices, add a dmesg output when a missing device re-appeared. Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2026-06-09btrfs: do not trim a device which is not writeableQu Wenruo
[BUG] There is a bug report that btrfs/242 can randomly fail with the following NULL pointer dereference: run fstests btrfs/242 at 2026-06-01 10:25:08 BTRFS: device fsid d4d7f234-487c-4787-88e4-47a8b68c9874 devid 1 transid 9 /dev/sdc (8:32) scanned by mount (122609) BTRFS info (device sdc): first mount of filesystem d4d7f234-487c-4787-88e4-47a8b68c9874 BTRFS info (device sdc): using crc32c checksum algorithm BTRFS warning (device sdc): devid 2 uuid fbe72d72-3272-482d-80fb-ab88ed398192 is missing BTRFS warning (device sdc): devid 2 uuid fbe72d72-3272-482d-80fb-ab88ed398192 is missing BTRFS info (device sdc): allowing degraded mounts BTRFS info (device sdc): turning on async discard BTRFS info (device sdc): enabling free space tree Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 user pgtable: 4k pages, 48-bit VAs, pgdp=000000013fd6b000 CPU: 4 UID: 0 PID: 122625 Comm: fstrim Not tainted 7.0.10-2-default #1 PREEMPT(full) openSUSE Tumbleweed e9a5f6b24978fba3bf015a992f865837fdfff3dd Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20250812-19.fc42 08/12/2025 pstate: 01400005 (nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : btrfs_trim_fs+0x34c/0xa00 [btrfs] lr : btrfs_trim_fs+0x1f0/0xa00 [btrfs] Call trace: btrfs_trim_fs+0x34c/0xa00 [btrfs f02c1d570ceea621c69d302ba75dd61868083840] (P) btrfs_ioctl_fitrim+0xe8/0x178 [btrfs f02c1d570ceea621c69d302ba75dd61868083840] btrfs_ioctl+0xdd4/0x2bd8 [btrfs f02c1d570ceea621c69d302ba75dd61868083840] __arm64_sys_ioctl+0xac/0x108 invoke_syscall.constprop.0+0x5c/0xd0 el0_svc_common.constprop.0+0x40/0xf0 do_el0_svc+0x24/0x40 el0_svc+0x40/0x1d0 el0t_64_sync_handler+0xa0/0xe8 el0t_64_sync+0x1b0/0x1b8 Code: 17ffff83 f94017e0 f9002be0 f9402ea0 (f9400c00) ---[ end trace 0000000000000000 ]--- Also the reporter is very kind to test the following ASSERT() added to btrfs_trim_free_extents_throttle(): ASSERT(device->bdev, "devid=%llu path=%s dev_state=0x%lx\n", device->devid, btrfs_dev_name(device), device->dev_state); And it shows the following output: assertion failed: device->bdev, in extent-tree.c:6630 (devid=2 path=/dev/sdd dev_state=0x82) Which means the device->bdev is NULL, and the dev_state is BTRFS_DEV_STATE_IN_FS_METADATA | BTRFS_DEV_STATE_ITEM_FOUND, without BTRFS_DEV_STATE_WRITEABLE flag set. [CAUSE] The pc points to the following call chain: btrfs_trim_fs() |- btrfs_trim_free_extents() |- btrfs_trim_free_extents_throttle() |- bdev_max_discard_sectors(device->bdev) So the NULL pointer dereference is caused by device->bdev being NULL. This looks impossible by a quick glance, as just before calling btrfs_trim_free_extents_throttle(), we have skipped any device that has BTRFS_DEV_STATE_MISSING flag set. However in this particular case, there is a window where the missing device is later re-scanned, causing btrfs to remove the BTRFS_DEV_STATE_MISSING flag: btrfs_control_ioctl() |- btrfs_scan_one_device() |- device_list_add() |- rcu_assign_pointer(device->name, name); | This updates the missing device's path to the new good path. | |- clear_bit(BTRFS_DEV_STATE_MISSING, &device->dev_state) This removes the BTRFS_DEV_STATE_MISSING flag. This allows the missing device to re-appear and clear the BTRFS_DEV_STATE_MISSING flag. However the device still does not have the BTRFS_DEV_STATE_WRITEABLE flag set, nor is its bdev pointer updated. The bdev pointer remains NULL, triggering the crash later. [FIX] This is a big de-synchronization between BTRFS_DEV_STATE_MISSING and device->bdev pointer, and shows a gap in btrfs's re-appearing-device handling. The proper handling of re-appearing device will need quite some extra work, which is out of the context of this small fix. Thankfully the regular bbio submission path has already handled it well by checking if the device->bdev is NULL before submitting. So here we just fix the crash by checking if the device is writeable and has a bdev pointer before calling bdev_max_discard_sectors(). Reported-by: Su Yue <glass.su@suse.com> Link: https://lore.kernel.org/linux-btrfs/wlwir19t.fsf@damenly.org/ Fixes: 499f377f49f0 ("btrfs: iterate over unused chunk space in FITRIM") CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2026-06-09btrfs: return real error after lookup failure in btrfs_ioctl_default_subvol()Filipe Manana
If we fail to lookup the dir item, we are always returning -ENOENT but that may not be the reason for the failure, as btrfs_lookup_dir_item() can return many different errors, such as -EIO or -ENOMEM for example. Fix this by returning the real error, and also fixup the silly error message, including the id of the directory and the error. Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2026-06-09btrfs: use mapping shared locking for reading super blockFilipe Manana
There's no need to exclusively lock the mapping, shared locking is enough to protect from a concurrent set block size operation (BLKBSZSET ioctl). Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2026-06-09btrfs: use lockless read in nr_cached_objects shrinker callbackBen Maurer
Under heavy memcg-driven slab reclaim with many memcgs and CPUs, shrink_slab_memcg() invokes the per-superblock count callback once per (memcg, NUMA node) tuple. For btrfs that callback reaches percpu_counter_sum_positive() on fs_info->evictable_extent_maps, which takes the percpu_counter's raw spinlock with IRQs disabled and walks every online CPU. With hundreds of memcgs driving reclaim on a host with dozens of CPUs, this counter lock becomes a global serialization point: profiles show CPU pinned in the spin_lock_irqsave acquire under __percpu_counter_sum, with cross-CPU IPIs hitting csd_lock_wait_toolong while waiting for spinning vCPUs. The shrinker count is advisory -- super_cache_count() already notes "counts can change between super_cache_count and super_cache_scan, so we really don't need locks here." Use percpu_counter_read_positive(), which is lockless. Worst-case skew is bounded by batch * num_online_cpus (a few thousand), negligible compared to the millions of extent maps a busy filesystem accumulates and well within the noise that the shrinker already tolerates. Tested-by: Boris Burkov <boris@bur.io> Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev> Signed-off-by: Ben Maurer <bmaurer@meta.com> Signed-off-by: David Sterba <dsterba@suse.com>
2026-06-09btrfs: switch local indicator variables to boolsDavid Sterba
For all local indicator variables do simple switch to bool, done on all files. Signed-off-by: David Sterba <dsterba@suse.com>
2026-06-09btrfs: send: pass bool for pending_move and refs_processed parametersDavid Sterba
We're passing simple indicators as int, switch them to bool types. Signed-off-by: David Sterba <dsterba@suse.com>
2026-06-09btrfs: use shifts for sectorsize and nodesizeDavid Sterba
Convert more multiplications of sectorsize or nodesize to use the shifts. The remaining cases are multiplications by constants that compiler can optimize by itself, and in tests. Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com>
2026-06-09btrfs: fix deadlock cloning inline extent when using flushoncommitFilipe Manana
In commit b48c980b6a7e ("btrfs: fix deadlock between reflink and transaction commit when using flushoncommit") a deadlock was fixed between reflinks and transaction commits when the fs is mounted with the flushoncommit option. This happened when we had to copy an inline extent's data to the destination file. However the issue was fixed only for the case where the destination offset is 0, it missed the case when the offset is greater than zero. Fix this by ensuring we get i_size update whenever we copied an inline extent's data into the destination file. Syzbot reported this with the following trace: INFO: task kworker/u8:3:57 blocked for more than 143 seconds. Not tainted syzkaller #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u8:3 state:D stack:21600 pid:57 tgid:57 ppid:2 task_flags:0x4208160 flags:0x00080000 Workqueue: writeback wb_workfn (flush-btrfs-129) Call Trace: <TASK> context_switch kernel/sched/core.c:5402 [inline] __schedule+0x16f9/0x5500 kernel/sched/core.c:7204 __schedule_loop kernel/sched/core.c:7283 [inline] schedule+0x164/0x360 kernel/sched/core.c:7298 wait_extent_bit fs/btrfs/extent-io-tree.c:905 [inline] btrfs_lock_extent_bits+0x59c/0x700 fs/btrfs/extent-io-tree.c:2008 btrfs_lock_extent fs/btrfs/extent-io-tree.h:152 [inline] btrfs_invalidate_folio+0x440/0xc00 fs/btrfs/inode.c:7718 extent_writepage fs/btrfs/extent_io.c:1848 [inline] extent_write_cache_pages fs/btrfs/extent_io.c:2552 [inline] btrfs_writepages+0x12f3/0x2410 fs/btrfs/extent_io.c:2684 do_writepages+0x32e/0x550 mm/page-writeback.c:2571 __writeback_single_inode+0x133/0x10e0 fs/fs-writeback.c:1764 writeback_sb_inodes+0x97f/0x1980 fs/fs-writeback.c:2056 wb_writeback+0x445/0xb00 fs/fs-writeback.c:2241 wb_do_writeback fs/fs-writeback.c:2388 [inline] wb_workfn+0x3fd/0xf20 fs/fs-writeback.c:2428 process_one_work+0x98b/0x1630 kernel/workqueue.c:3318 process_scheduled_works kernel/workqueue.c:3401 [inline] worker_thread+0xb49/0x1140 kernel/workqueue.c:3482 kthread+0x388/0x470 kernel/kthread.c:436 ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> INFO: task syz.0.145:8523 blocked for more than 143 seconds. Not tainted syzkaller #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz.0.145 state:D stack:22752 pid:8523 tgid:8522 ppid:5850 task_flags:0x400140 flags:0x00080002 Call Trace: <TASK> context_switch kernel/sched/core.c:5402 [inline] __schedule+0x16f9/0x5500 kernel/sched/core.c:7204 __schedule_loop kernel/sched/core.c:7283 [inline] schedule+0x164/0x360 kernel/sched/core.c:7298 wb_wait_for_completion+0x3e8/0x790 fs/fs-writeback.c:227 __writeback_inodes_sb_nr+0x24c/0x2d0 fs/fs-writeback.c:2847 try_to_writeback_inodes_sb+0x9a/0xc0 fs/fs-writeback.c:2895 btrfs_start_delalloc_flush fs/btrfs/transaction.c:2182 [inline] btrfs_commit_transaction+0x813/0x2fc0 fs/btrfs/transaction.c:2371 btrfs_sync_file+0xdf4/0x1230 fs/btrfs/file.c:1822 generic_write_sync include/linux/fs.h:2663 [inline] btrfs_do_write_iter+0x6a9/0x840 fs/btrfs/file.c:1473 new_sync_write fs/read_write.c:595 [inline] vfs_write+0x629/0xba0 fs/read_write.c:688 ksys_write+0x156/0x270 fs/read_write.c:740 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x15f/0x560 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f5a0bdece59 RSP: 002b:00007f5a0b446028 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007f5a0c065fa0 RCX: 00007f5a0bdece59 RDX: 000000000000029f RSI: 0000200000000200 RDI: 0000000000000004 RBP: 00007f5a0be82d6f R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f5a0c066038 R14: 00007f5a0c065fa0 R15: 00007ffe149206b8 </TASK> INFO: task syz.0.145:8539 blocked for more than 143 seconds. Not tainted syzkaller #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz.0.145 state:D stack:23704 pid:8539 tgid:8522 ppid:5850 task_flags:0x400140 flags:0x00080002 Call Trace: <TASK> context_switch kernel/sched/core.c:5402 [inline] __schedule+0x16f9/0x5500 kernel/sched/core.c:7204 __schedule_loop kernel/sched/core.c:7283 [inline] schedule+0x164/0x360 kernel/sched/core.c:7298 wait_current_trans+0x39f/0x590 fs/btrfs/transaction.c:536 start_transaction+0xbd8/0x1820 fs/btrfs/transaction.c:716 clone_copy_inline_extent fs/btrfs/reflink.c:299 [inline] btrfs_clone+0x1316/0x2540 fs/btrfs/reflink.c:574 btrfs_clone_files+0x271/0x3f0 fs/btrfs/reflink.c:795 btrfs_remap_file_range+0x76b/0x1320 fs/btrfs/reflink.c:948 vfs_clone_file_range+0x435/0x7b0 fs/remap_range.c:403 ioctl_file_clone fs/ioctl.c:239 [inline] ioctl_file_clone_range fs/ioctl.c:257 [inline] do_vfs_ioctl+0xe15/0x1540 fs/ioctl.c:544 __do_sys_ioctl fs/ioctl.c:595 [inline] __se_sys_ioctl+0x82/0x170 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x15f/0x560 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f5a0bdece59 RSP: 002b:00007f5a0b425028 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f5a0c066090 RCX: 00007f5a0bdece59 RDX: 00002000000000c0 RSI: 000000004020940d RDI: 0000000000000004 RBP: 00007f5a0be82d6f R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f5a0c066128 R14: 00007f5a0c066090 R15: 00007ffe149206b8 </TASK> Reported-by: syzbot+c7443384724bb0f9e913@syzkaller.appspotmail.com Link: https://lore.kernel.org/linux-btrfs/6a150a09.820a0220.e7972.0006.GAE@google.com/ Fixes: 05a5a7621ce6 ("Btrfs: implement full reflink support for inline extents") Reviewed-by: Boris Burkov <boris@bur.io> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2026-06-09btrfs: allocate eb-attached btree pages as movableRik van Riel
Extent buffer pages allocated by alloc_extent_buffer() are attached to btree_inode->i_mapping (the buffer_tree path), reach the LRU, and are served by the btree_migrate_folio aops in fs/btrfs/disk-io.c. They are migratable in practice once their owning extent buffer hits refs == 1, which happens naturally. The buddy allocator classifies them by GFP, however, and bare GFP_NOFS lands them in MIGRATE_UNMOVABLE pageblocks. The result: every btree_inode page we read in pins an unmovable pageblock from the page-superblock allocator's perspective, even though the page itself can be moved. Have each caller of btrfs_alloc_page_array, btrfs_alloc_folio_array, and alloc_eb_folio_array pass in the full GFP mask directly, instead of having the functions calculate it from boolean flags. The alloc_extent_buffer call site passes GFP_NOFS | __GFP_NOFAIL | __GFP_MOVABLE. All other call sites pass plain GFP_NOFS. Three categories of caller stay on bare GFP_NOFS, deliberately: - alloc_dummy_extent_buffer / btrfs_clone_extent_buffer: the resulting eb is EXTENT_BUFFER_UNMAPPED, folio->mapping stays NULL, the folios never enter LRU, never get migrate_folio aops. Tagging them __GFP_MOVABLE would violate the page allocator's migrability contract and they would defeat compaction in MOVABLE pageblocks where isolate_migratepages_block skips non-LRU non-movable_ops pages outright. - btrfs_alloc_page_array callers in fs/btrfs/raid56.c (stripe pages), fs/btrfs/inode.c (encoded reads), fs/btrfs/ioctl.c (io_uring encoded reads), fs/btrfs/relocation.c (relocation buffers): same contract violation. raid56 stripe_pages additionally persist in the stripe cache (RBIO_CACHE_SIZE=1024) well beyond a single I/O, so they are not transient enough to hand-wave the contract. - btrfs_alloc_folio_array caller in fs/btrfs/scrub.c (stripe folios): same -- stripe->folios[] are private buffers freed via folio_put in release_scrub_stripe. This change targets the dominant fragmentation source observed on the page-superblock series: ~28 GB of btree_inode pages parked across many tainted superpageblocks on a 250 GB test system with btrfs root, preventing 1 GiB hugepage allocation from those regions. With the movable hint, those pages now land in MOVABLE pageblocks where the existing background defragger drains them through the standard PB_has_movable gate, no LRU-sample fallback needed. Assisted-by: Claude:claude-opus-4-6 Signed-off-by: Rik van Riel <riel@surriel.com> Signed-off-by: David Sterba <dsterba@suse.com>
2026-06-09btrfs: add 32-bit compat ioctl for BTRFS_IOC_GET_SUBVOL_INFODaan De Meyer
On 64-bit kernels with 32-bit userspace, struct btrfs_ioctl_timespec is laid out as 16 bytes (8B sec + 4B nsec + 4B trailing padding) instead of the 12 bytes a 32-bit userspace expects, because the surrounding struct is not packed. As a result, struct btrfs_ioctl_get_subvol_info_args has a different size and layout in 32-bit userspace than in the 64-bit kernel, and BTRFS_IOC_GET_SUBVOL_INFO returns garbage to 32-bit callers. Mirror what was done for BTRFS_IOC_SET_RECEIVED_SUBVOL: add a packed btrfs_ioctl_get_subvol_info_args_32 with btrfs_ioctl_timespec_32 fields, define BTRFS_IOC_GET_SUBVOL_INFO_32 with that struct as the size argument, factor the existing handler into a shared _btrfs_ioctl_get_ subvol_info() helper, and add btrfs_ioctl_get_subvol_info_32() which fills the kernel struct and translates field-by-field into the 32-bit struct before copy_to_user(). Signed-off-by: Daan De Meyer <daan@amutable.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2026-06-09btrfs: derive f_fsid from on-disk fsid and dev_tAnand Jain
The f_fsid was originally derived from fs_devices->fsid and the subvolume root ID. However, when temp_fsid is active, fs_devices->fsid is randomized, making the standard derivation inconsistent. Since metadata_uuid is optional, it is not a reliable alternative. This patch instead retrieves the on-disk UUID from fs_info->super_copy->fsid. To prevent f_fsid collisions between original and cloned filesystems, this implementation hashes the dev_t for single-device btrfs filesystems to ensure uniqueness. This is limited to single-device filesystems as cloned mounts are currently only supported for that configuration. Note that f_fsid will change if the device is replaced. Additionally, since the kernel cannot distinguish between the original and the cloned filesystem, this new f_fsid derivation is applied to both. Link: https://lore.kernel.org/linux-btrfs/cover.1772095546.git.asj@kernel.org/ Link: https://lore.kernel.org/linux-btrfs/cover.1774092915.git.asj@kernel.org/ Signed-off-by: Anand Jain <asj@kernel.org> Signed-off-by: David Sterba <dsterba@suse.com>
2026-06-09btrfs: use on-disk uuid for s_uuid in temp_fsid mountsAnand Jain
When mounting a cloned filesystem with a temporary fsuuid (temp_fsid), layered modules like overlayfs require a persistent identifier. While internal in-memory fs_devices->fsid must remain unique to the kernel module, let s_uuid carry the original on-disk UUID. Signed-off-by: Anand Jain <asj@kernel.org> Signed-off-by: David Sterba <dsterba@suse.com>
2026-06-09btrfs: avoid unnecessary dev stats updatesQu Wenruo
[MINOR PROBLEM] When mounting a filesystem with a valid DEV_STATS item, we will always update the DEV_STATS again in the next transaction commit, even if there is no change the values. [CAUSE] During the mount, btrfs_device_init_dev_stats() will read out the on-disk DEV_STATS item for each device. Then it calls btrfs_dev_stat_set() to update the in-memory structure. However btrfs_dev_stat_set() does not only set the dev stats value, but also increase device->dev_stats_ccnt. That member determines if we should update the device item at the next transaction commit. Since we have called btrfs_dev_stat_set() for each dev status member, dev_stats_ccnt will be non-zero and we will update the dev stats item even it doesn't change at all. [FIX] Instead of using btrfs_dev_stat_set() for valid on-disk DEV_STATUS values, directly call atomic_set() to set the in-memory values. For other call sites, we still want to use btrfs_dev_stat_set() so that we will force updating/creating the dev stats item. Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
generated by cgit v1.2.3 (git 2.39.1) at 2026-08-06 05:38:47 +0000