| Age | Commit message (Collapse) | Author |
|---|
|
Add device tree documentation for MAX20830 step-down DC-DC switching
regulator with PMBus interface.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
Link: https://lore.kernel.org/r/20260505-dev_max20830-v4-1-4343dcbfd7d7@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
LM75 devices supported by this driver support configurable active-high
alert polarity. This is already documented in the devicetree description.
Add support for it to the driver.
Follow documentation and defensively enforce active-low if property is
not set. This avoids possible inconsistencies for future devices with
wrong parametrization. No API breakage as all current devices have
their parameters set to active-low.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://lore.kernel.org/r/20260504151020.462342-3-markus.stockhausen@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The LM75 alert pin is asserted based on the value of alert polarity bit
of the configuration register. The device/driver default is 0 which means
alert pin is configured to be active-low. A value of 1 maps to inverted
(active-high).
Add an optional boolean property "ti,alert-polarity-active-high" to
override the alert pin polarity. When absent, the default active-low
polarity is kept.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20260504151020.462342-2-markus.stockhausen@gmx.de
[groeck: Shorten description line length]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Convert the ZyXEL NSA320 MCU bindings from text format to YAML schema.
Signed-off-by: Manish Baing <manishbaing2789@gmail.com>
Acked-by: Adam Baker <linux@baker-net.org.uk>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260501102116.8275-1-manishbaing2789@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
By convention MODULE_DEVICE_TABLE() immediately follows the ID table it
exports, because this is easier to read and verify. It also makes more
sense since #ifdef for ACPI or OF could hide both of them.
Most of the privers already have this correctly placed, so adjust
the missing ones. No functional impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Thomas Weißschuh <linux@weissschuh.net> # cros_ec_hwmon.c
Link: https://lore.kernel.org/r/20260505102923.189289-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The driver currently passes a stack-allocated buffer to spi_write(),
which is incompatible with DMA on systems with CONFIG_VMAP_STACK
enabled.
Move the transfer buffer into the driver's private data structure
to ensure it is DMA-safe. Since this shared buffer now requires
serialization, this change depends on the previous commit which
migrated the driver to the hwmon 'with_info' API.
While moving the logic, also:
- Corrected the sign extension for 14-bit data by casting to s16.
- Scaled the output to millivolts (2500mV full scale
) to comply with the hwmon ABI.
Signed-off-by: Tabrez Ahmed <tabreztalks@gmail.com>
Link: https://lore.kernel.org/r/20260502020844.110038-4-tabreztalks@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Convert the ads7871 driver from the legacy hwmon_device_register() to the
modern hwmon_device_register_with_info() API. This migration simplifies
the driver by using the structured hwmon_channel_info approach and
prepares the codebase for the transition to a shared DMA-safe buffer.
While at it, fix checkpatch violations.
Signed-off-by: Tabrez Ahmed <tabreztalks@gmail.com>
Link: https://lore.kernel.org/r/20260502020844.110038-3-tabreztalks@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Some systems require fans to enter in a defined safe state during system
shutdown or reboot handoff.
Add support for the optional Device Tree property "fan-shutdown-percent"
to configure the shutdown PWM duty cycle per fan output.
If the property is present for a fan channel, the driver converts the
configured percentage value to the corresponding PWM duty cycle and
applies it during driver shutdown.
If the property is not present, the fan state remains unchanged.
Signed-off-by: Florin Leotescu <florin.leotescu@nxp.com>
Link: https://lore.kernel.org/r/20260429065955.2113012-4-florin.leotescu@oss.nxp.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The EMC2305 fan controller supports multiple independent PWM fan
outputs. Some systems require fans to enter a defined safe state
during system shutdown or reboot handoff, until firmware or the next
boot stage reconfigures the controller.
Add an optional "fan-shutdown-percent" property to fan child nodes
allowing the PWM duty cycle applied during shutdown to be configured
per fan output.
Signed-off-by: Florin Leotescu <florin.leotescu@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20260429065955.2113012-3-florin.leotescu@oss.nxp.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The fan channel index is used to access per-channel data structures.
Validate the index against the number of available channels
before use to prevent out-of-bounds access if an invalid
value is provided.
The thermal registration path currently uses a sequential child index,
which may not match the validated channel from DT. Use the DT "reg"
property when registering cooling devices to ensure consistent
channel handling
Signed-off-by: Florin Leotescu <florin.leotescu@nxp.com>
Link: https://lore.kernel.org/r/20260429065955.2113012-2-florin.leotescu@oss.nxp.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for the Luxshare LX1308, a high-efficiency 12V 860W
DC/DC power module. The module operates from 40-60V input voltage.
Signed-off-by: Brian Chiang <chiang.brian@inventec.com>
Link: https://lore.kernel.org/r/20260428-add-support-lx1308-v2-2-90f115954143@inventec.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add device tree bindings for the Luxshare LX1308, a high-efficiency
12V 860W DC/DC power module with PMBus interface.
Signed-off-by: Brian Chiang <chiang.brian@inventec.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260428-add-support-lx1308-v2-1-90f115954143@inventec.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add external diode fault read capability to the
MCP998X/33 and MCP998XD/33D driver.
Signed-off-by: Victor Duicu <victor.duicu@microchip.com>
Link: https://lore.kernel.org/r/20260423-add-external-diode-fault-read-v2-1-4004bb5f7d55@microchip.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The Cadence LGA (Legacy Architecture IP) PCIe host controller currently
lacks the mandatory 100 ms delay after link training completes for speeds
> 5.0 GT/s, as required by PCIe r6.0 sec 6.6.1.
Add a 'max_link_speed' field to struct cdns_pcie. In the common host
layer function cdns_pcie_host_start_link(), after the link has been
successfully established, call pci_host_common_link_train_delay() to
insert the required delay.
For the j721e glue driver, set cdns_pcie.max_link_speed from the existing
link speed logic. For other LGA-based glue drivers (sky1, sg2042), the
common LGA host setup (pcie-cadence-host.c) provides a fallback reading
of the device tree property "max-link-speed" when available. This ensures
that the delay is not missed on those platforms once they enable the
property.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260518004246.1384532-3-18255117159@163.com
|
|
PCIe r6.0, sec 6.6.1 (Conventional Reset) requires that for a Downstream
Port supporting Link speeds greater than 5.0 GT/s, software must wait a
minimum of 100 ms after Link training completes before sending any
Configuration Request.
Introduce a static inline helper pci_host_common_link_train_delay() that
checks the given max_link_speed (2 = 5.0 GT/s, 3 = 8.0 GT/s, etc.) and
calls msleep(100) only when the speed is greater than 5.0 GT/s.
This allows multiple host controller drivers to share the same mandatory
delay without duplicating the logic.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260518004246.1384532-2-18255117159@163.com
|
|
Pull rdma fixes from Jason Gunthorpe:
"Several significant bug fixes of pre-existing issues:
- Missing validation on ucap fd types passed from userspace
- Missing validation of HW DMA space vs userpace expected sizes in
EFA queue setup
- DMA corruption when using DMA block sizes >= 4G when setting up MRs
in all drivers
- Missing validation of CPU IDs when setting up dma handles
- Missing validation of IB_MR_REREG_ACCESS when changing writability
of a MR
- Missing validation of received message/packet size in ISER and SRP"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/srp: bound SRP_RSP sense copy by the received length
IB/isert: Reject login PDUs shorter than ISER_HEADERS_LEN
RDMA: During rereg_mr ensure that REREG_ACCESS is compatible
RDMA/core: Validate cpu_id against nr_cpu_ids in DMAH alloc
RDMA/umem: Fix truncation for block sizes >= 4G
RDMA/efa: Validate SQ ring size against max LLQ size
RDMA/core: Validate the passed in fops for ib_get_ucaps()
|
|
Commit e1c5ae59c0f2 ("fs: don't allow non-init s_user_ns for filesystems
without FS_USERNS_MOUNT") prevents the mount of any filesystem inside a
container that doesn't have FS_USERNS_MOUNT set.
This broke NFS mounts in our containerized environment. We have a daemon
somewhat like systemd-mountfsd running in the init_ns. A process does a
fsopen() inside the container and passes it to the daemon via unix
socket.
The daemon then vets that the request is for an allowed NFS server and
performs the mount. This now fails because the fc->user_ns is set to the
value in the container and NFS doesn't set FS_USERNS_MOUNT. We don't
want to add FS_USERNS_MOUNT to NFS since that would allow the container
to mount any NFS server (even malicious ones).
Add a new FS_USERNS_DELEGATABLE flag, and enable it on NFS.
Fixes: e1c5ae59c0f2 ("fs: don't allow non-init s_user_ns for filesystems without FS_USERNS_MOUNT")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260129-twmount-v1-1-4874ed2a15c4@kernel.org
Acked-by: Anna Schumaker <anna.schumaker@oracle.com>
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@futurfusion.io>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
This configuration option exists so "that we don't provide the symbol
when there's no possibility of there being a usable clocksource".
However it only covers __vdso_gettimeofday() and none of the other vDSO
functions which should be affected by the same circumstances.slightly slightly.
Remove MIPS_CLOCK_VSYSCALL and fold its usecase into
MIPS_GENERIC_GETTIMEOFDAY, which works correctly.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Daniel Lezcano <daniel.lezcano@kernel.org>
Cc: Thomas Gleixner <tglx@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@vger.kernel.org
Link: https://patch.msgid.link/20260521-vdso-mips-kconfig-v1-9-2f79dcd6c78f@linutronix.de
|
|
As explained in the comment, the problematic GOT references are only
emitted by old versions of GCC.
Limit the restriction to those compilers.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Link: https://patch.msgid.link/20260521-vdso-mips-kconfig-v1-8-2f79dcd6c78f@linutronix.de
|
|
The currently used MIPS_DISABLE_VDSO will disable only the userspace
bits of the time-related vDSO. The kernel part is still pointlessly
built and running.
Remove MIPS_DISABLE_VDSO and fold its usecase into
MIPS_GENERIC_GETTIMEOFDAY, which works correctly.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Daniel Lezcano <daniel.lezcano@kernel.org>
Cc: Thomas Gleixner <tglx@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@vger.kernel.org
Link: https://patch.msgid.link/20260521-vdso-mips-kconfig-v1-7-2f79dcd6c78f@linutronix.de
|
|
available
VDSO_CLOCKMODE_GIC is only defined if CONFIG_GENERIC_GETTIMEOFDAY is
enabled. Right now this is always the case, but it will change soon.
Prepare for the potential unavailability of VDSO_CLOCKMODE_GIC.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Link: https://patch.msgid.link/20260521-vdso-mips-kconfig-v1-6-2f79dcd6c78f@linutronix.de
|
|
VDSO_CLOCKMODE_R4K is only defined if CONFIG_GENERIC_GETTIMEOFDAY is
enabled. Right now this is always the case, but it will change soon.
Prepare for the potential unavailability of VDSO_CLOCKMODE_R4K.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Link: https://patch.msgid.link/20260521-vdso-mips-kconfig-v1-5-2f79dcd6c78f@linutronix.de
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers
Microchip RISC-V soc drivers for v7.2
A single dt-binding compatible addition for the irqmux on pic64gx.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-soc-drivers-for-v7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
dt-bindings: soc: microchip: document irqmux on pic64gx
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers
standalone cache drivers for v7.2
SiFive ccache:
Add the Starfive JH7110 to the list of devices that need the
non-standard cache ops, because the GPU appears to be DMA non-coherent
unlike other peripherals.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'cache-for-v7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
cache: sifive_ccache: Add StarFive JH7110 SoC support
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
In tegra234_mc_icc_aggregate(), the 'if (mc)' check inside the
CPU-cluster branch is always true. 'mc' was already dereferenced
via 'mc->bwmgr_mrq_supported' a few lines above, so if it were NULL
the function would have faulted there. Drop the redundant check.
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260527140127.49172-4-sumitg@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
tegra264_mc_icc_aggregate() does nothing on top of icc_std_aggregate
except an early return on !mc->bwmgr_mrq_supported.
tegra264_mc_icc_set() already returns early on the same condition,
before reading any of the aggregated avg_bw / peak_bw values. This
makes the early return in aggregate() redundant. So, set
tegra264_mc_icc_ops.aggregate to icc_std_aggregate and drop the
helper.
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260527140127.49172-3-sumitg@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
tegra186_emc_interconnect_init() copies the MC's ICC aggregate hook
into the EMC provider. That hook (tegra234_mc_icc_aggregate /
tegra264_mc_icc_aggregate) uses container_of() to recover 'mc',
which is only valid when the icc_provider is embedded in struct
tegra_mc. For an EMC node the provider is embedded in struct
tegra186_emc, so 'mc' points into unrelated memory.
This stayed harmless until commit faafd6ca7e6e ("memory: tegra:
make icc_set_bw return zero if BWMGR not supported") added an
unconditional read of mc->bwmgr_mrq_supported at the top of the
hook. UBSAN catches the stray load on every EMC aggregation:
UBSAN: invalid-load in drivers/memory/tegra/tegra234.c:1104:9
load of value 112 is not a valid value for type '_Bool'
No functional impact in practice, since the hook's only other mc
dereference (mc->num_channels) sits inside a
TEGRA_ICC_MC_CPU_CLUSTER* branch that EMC nodes never enter.
Fix this by setting the EMC provider's aggregate hook to
icc_std_aggregate, instead of borrowing the MC's hook. The MC
providers continue using their own aggregate hooks, where
container_of() correctly resolves to struct tegra_mc.
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Fixes: 9a38cb27668e ("memory: tegra: Add interconnect support for DRAM scaling in Tegra234")
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260527140127.49172-2-sumitg@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Add a raw BTF test that exercises repeated special-field expansion with a
large array count. The compact element layout keeps the array byte size
representable while the repeated field count overflows the old u32 capacity
calculation in btf_repeat_fields().
Signed-off-by: Paul Moses <p@1g4.org>
Link: https://lore.kernel.org/bpf/SzebdWqm2zREZBf8Tc5Kc-JDWbh9nBztnk4PUu5kRSD1OOdr_ESVTt__2Hd3-lClr47jIjJCXfOH0RHsMpjjpEUh_R2v30nh3T1IXNT6Pbo=@1g4.org
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/drivers
TI SoC driver updates for v7.2
TI K3 TISCI:
- ti_sci: Add BOARDCFG_MANAGED mode for support system suspend/resume cycles
- ti_sci: Add support for restoring IRQ and clock contexts during resume.
- clk: keystone: sci-clk: Add clock restoration support.
SoC Drivers:
- k3-socinfo: Add support for identifying AM62P silicon variants via NVMEM,
along with corresponding dt-bindings update for nvmem-cells support
- k3-ringacc: Fix incorrect access mode for ring pop tail IO/proxy operations
Keystone Navigator (knav) Cleanup and Fixes:
- knav_qmss: Multiple code quality improvements
- knav_qmss_queue: Implement proper resource cleanup in the remove() path
General Cleanups:
- k3-ringacc: Use str_enabled_disabled() helper for consistency
- knav_qmss: Use %pe format specifier for PTR_ERR() printing
* tag 'ti-driver-soc-for-v7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
firmware: ti_sci: Add support for restoring clock context during resume
clk: keystone: sci-clk: Add restore_context() operation
firmware: ti_sci: Add support for restoring IRQs during resume
firmware: ti_sci: Add BOARDCFG_MANAGED mode support
soc: ti: k3-ringacc: Use str_enabled_disabled() helper
soc: ti: knav_dma: Use IOMEM_ERR_PTR() in pktdma_get_regs()
soc: ti: knav_dma: Remove dead check on unsigned args.args[0]
soc: ti: knav_dma: Remove unused DMA_PRIO_MASK macro
soc: ti: knav_qmss_acc: Fix kernel-doc Return: tag
soc: ti: knav_qmss: Fix __iomem annotations and __be32 type
soc: ti: knav_qmss: Use %pe to print PTR_ERR()
soc: ti: knav_qmss: Fix kernel-doc Return: tags
soc: ti: knav_qmss: Inline lockdep condition in for_each_handle_rcu
soc: ti: knav_qmss: Rename global kdev to knav_qdev to fix -Wshadow
soc: ti: knav_qmss: Remove remaining redundant ENOMEM printks
soc: ti: knav_qmss_queue: Implement resource cleanup in remove()
soc: ti: k3-ringacc: Fix access mode for k3_ringacc_ring_pop_tail_io/proxy
soc: ti: knav_dma: fix all kernel-doc warnings in knav_dma.h
soc: ti: k3-socinfo: Add support for AM62P variants via NVMEM
dt-bindings: hwinfo: ti,k3-socinfo: Add nvmem-cells support
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into soc/drivers
This pull request contains Broadcom SoC drivers changes for 7.2, please
pull the following:
- Justin changes the soc_device driver to be more modern and consolidate
the initialization
- Chen-Yu updates the BCM2835 firmware Kconfig dependency and adds
COMPILE_TEST
* tag 'arm-soc/for-7.2/drivers' of https://github.com/Broadcom/stblinux:
firmware: raspberrypi: Change dependency to ARCH_BCM2835 and COMPILE_TEST
soc: brcmstb: consolidate initcall functions
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers
Memory controller drivers for v7.2
1. Tegra MC/EMC:
- Handle system sleep, necessary to re-program registers after system
resume. A few more improvements.
- Add Tegra114 and Tegra238 Memory Controller, and Tegra114 External
MC support.
- Grow Tegra264 support.
2. Renesas XSPI: Document RZ/T2H and RZ/N2H variants, compatible with
existing devices.
* tag 'memory-controller-drv-7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: tegra264: Add full set of MC clients
dt-bindings: memory: tegra264: Add full set of MC client IDs
memory: tegra264: Skip clients without bpmp_id or type
memory: renesas-rpc-if: Fix duplicate device name on multi-instance platforms
dt-bindings: memory: renesas,rzg3e-xspi: Add RZ/T2H and RZ/N2H support
memory: omap-gpmc: Silence W=1 kerneldoc warnings
memory: tegra114-emc: Simplify tegra114_emc_interconnect_init() error message
memory: tegra114-emc: Do not print error on icc_node_create() failure
memory: tegra: Fix possible null pointer dereference
memory: tegra: Add Tegra114 EMC driver
memory: tegra: Implement EMEM regs and ICC ops for Tegra114
dt-bindings: memory: Document Tegra114 External Memory Controller
dt-bindings: memory: Document Tegra114 Memory Controller
memory: tegra: Add Tegra238 MC support
dt-bindings: memory: tegra: Add nvidia,tegra238-mc compatible
memory: tegra: Restore MC interrupt masks on resume
memory: tegra: Wire up system sleep PM ops
memory: tegra: Make ->resume() callback return void
memory: tegra: Deduplicate rate request management code
memory: atmel-ebi: Allow deferred probing
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers
Samsung SoC drivers for v7.2
Improve Samsung Exynos (and Google GS101) ACPM (Alive Clock and Power
Manager) firmware driver:
1. Few code improvements.
2. Add support for protocol used to communicate with Thermal Management
Unit (TMU). This will allow to implement the thermal driver working
for newer Samsung Exynos and Google GS101 SoCs.
* tag 'samsung-drivers-7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
firmware: samsung: acpm: remove compile-testing stubs
firmware: samsung: acpm: Add devm_acpm_get_by_phandle helper
firmware: samsung: acpm: Add TMU protocol support
firmware: samsung: acpm: Make acpm_ops const and access via pointer
firmware: samsung: acpm: Drop redundant _ops suffix in acpm_ops members
firmware: samsung: acpm: Annotate rx_data->cmd with __counted_by_ptr
firmware: samsung: acpm: Consolidate transfer initialization helper
firmware: samsung: acpm: Fix infinite loop on sequence number exhaustion
firmware: samsung: acpm: Fix missing LKMM barriers in sequence allocator
firmware: samsung: acpm: Fix false timeouts and Use-After-Free in polling
firmware: samsung: acpm: Fix mailbox channel leak on probe error
firmware: samsung: acpm: Fix cross-thread RX length corruption
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The MediaTek MT7925 WiFi device advertises FLR capability, but it does not
work correctly. This manifests in VFIO passthrough scenarios. Normal VM
operation works fine, including clean shutdown/reboot. However, when the VM
terminates uncleanly (crash, force-off), VFIO attempts to reset the device
before it can be assigned to another VM. Because FLR is broken, the reset
fails, preventing reuse.
This is similar to its predecessor MT7922 (see 81f64e925c29 ("PCI: Avoid
FLR for Mediatek MT7922 WiFi")), but with different symptoms. The MT7922
issue manifests as config read failures (returning ~0) after FLR. The
MT7925 shows different behavior: config reads work correctly after FLR, but
firmware communication fails.
First VM start with MT7925 works fine:
mt7925e 0000:08:00.0: ASIC revision: 79250000
mt7925e 0000:08:00.0: WM Firmware Version: ____000000, Build Time: 20260106153120
After force reset or VM crash, when VFIO attempts FLR to reset the device
for reassignment, firmware initialization fails:
mt7925e 0000:08:00.0: ASIC revision: 79250000
mt7925e 0000:08:00.0: Message 00000010 (seq 1) timeout
mt7925e 0000:08:00.0: Failed to get patch semaphore
[Repeats with increasing sequence numbers 2-10]
mt7925e 0000:08:00.0: hardware init failed
The driver cannot acquire the patch semaphore needed for firmware
initialization, indicating that FLR does not properly reset the firmware
state. The device remains in this broken state until physical power cycle.
Disable FLR for MT7925 so the PCI core falls back to other reset methods,
e.g., Secondary Bus Reset, which successfully resets the device and allows
reinitialization for VFIO passthrough reuse.
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260522070646.203115-1-jtornosm@redhat.com
|
|
The length of the string is calculated in order to allocate the correct
sized memory block, use the same length to copy the string.
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20260606202633.5018-4-david.laight.linux@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
firmware: tegra: Changes for v7.2-rc1
This set of changes contains another attempt at resolving a Kconfig
dependency, propagates debugfs error codes and adds support for multiple
sockets to the BPMP driver.
* tag 'tegra-for-7.2-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware: tegra: bpmp: Add support for multi-socket platforms
firmware: tegra: bpmp: Propagate debugfs errors
firmware: tegra: Make TEGRA_IVC a hidden Kconfig symbol
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
soc/tegra: pmc: Changes for v7.2-rc1
The bulk of these changes converts existing users to the modern variants
of the API that take a PMC instance as argument. This completes the
transition to multi-instance support, which then makes room for cleanups
and restricting the remaining legacy APIs to 32-bit platforms.
Some changes in this set also clean up powergate debugfs and restrict
the power-off handler to be installed only where appropriate. Lastly,
support for Tegra238 is added.
* tag 'tegra-for-7.2-pmc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: pmc: Add Tegra238 support
soc/tegra: pmc: Restrict power-off handler to Nexus 7
soc/tegra: pmc: Populate powergate debugfs only when needed
soc/tegra: pmc: Move legacy code behind CONFIG_ARM guard
soc/tegra: pmc: Remove unused legacy functions
soc/tegra: pmc: Create PMC context dynamically
usb: xhci: tegra: Explicitly specify PMC instance to use
PCI: tegra: Explicitly specify PMC instance to use
media: vde: Explicitly specify PMC instance to use
drm/tegra: Explicitly specify PMC instance to use
drm/nouveau: tegra: Explicitly specify PMC instance to use
ata: ahci_tegra: Explicitly specify PMC instance to use
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
fuse_ref_folio() unlocks the request but does not re-lock it before
returning. fuse_chan_abort() can end the request and the async end
callback (eg fuse_writepage_free()) can free the args while the
subsequent copy chain logic after fuse_ref_folio() accesses them,
leading to use-after-free issues.
Fix this by locking the request in fuse_ref_folio() before returning.
Fixes: c3021629a0d8 ("fuse: support splice() reading from fuse device")
Cc: stable@vger.kernel.org
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
fuse_try_move_folio() unlocks the request on entry but does not
re-lock it on the success path. This means fuse_chan_abort() can end the
request and free the fuse_io_args (eg fuse_readpages_end()) while the
subsequent copy chain logic after fuse_try_move_folio() accesses the
fuse_io_args, leading to use-after-free issues.
Fix this by calling lock_request() before replace_page_cache_folio().
This ensures the request is locked on the success path which will
prevent the fuse_io_args from being freed while the later copying logic
runs, and also ensures that the ap->folios[i]->mapping is never null
since ap->folios[i] will always point to the newfolio after
replace_page_cache_folio().
Fixes: ce534fb05292 ("fuse: allow splice to move pages")
Cc: stable@vger.kernel.org
Reported-by: Lei Lu <llfamsec@gmail.com>
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Replacing strcpy() with strscpy() ensures that overflow of the target
buffer cannot happen.
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Antony Antony says:
====================
The current XFRM_MSG_MIGRATE interface is tightly coupled to policy and
SA migration, and it lacks the information required to reliably migrate
individual SAs. This makes it unsuitable for IKEv2 deployments,
dual-stack setups (IPv4/IPv6), and scenarios where policies are managed
externally (e.g., by daemons other than the IKE daemon).
Mandatory SA selector list
The current API requires a non-empty SA selector list, which does not
reflect the IKEv2 use case.
A single Child SA may correspond to multiple policies,
and SA discovery already occurs via address and reqid matching. With
dual-stack Child SAs this leads to excessive churn: the current method
would have to be called up to six times (in/out/fwd × v4/v6) on SA,
while the new method only requires two calls.
Selectors lack SPI (and marks)
XFRM_MSG_MIGRATE cannot uniquely identify an SA when multiple SAs share
the same policies (per-CPU SAs, SELinux label-based SAs, etc.). Without
the SPI, the kernel may update the wrong SA instance.
Reqid cannot be changed
Some implementations allocate reqids based on traffic selectors. In
host-to-host or selector-changing scenarios, the reqid must change,
which the current API cannot express.
Because strongSwan and other implementations manage policies
independently of the kernel, an interface that updates only a specific
SA - with complete and unambiguous identification - is required.
SA Selector, x->sel, can't be changed, especially Transport mode.
XFRM_MSG_MIGRATE_STATE provides that interface. It supports migration
of a single SA via xfrm_usersa_id (including SPI) and we fix
encap removal in this patch set, reqid updates, address changes,
and other SA-specific parameters. It avoids the structural limitations
of XFRM_MSG_MIGRATE and provides a simpler, extensible mechanism for
precise per-SA migration without involving policies.
This method also allows migtrating SA selectors typically used with
host-to-host in Transport mode.
New migration steps: first install block policy, remove the old policy,
call XFRM_MSG_MIGRATE_STATE for each state, then re-install the
policies and remove the block policy.
If the target SA tuple (daddr, SPI, proto, family) is already
occupied, the operation returns -EEXIST. In this case the original
SA is not preserved. Userspace must handle -EEXIST by
re-establishing the SA at the IKE level and manage policies.
====================
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
The code that gets the frame buffer mode from OF has 'use after free',
'buffer overrun' and memory leaks.
info->edid_data isn't free if the probe functions fail or if
pd->def_mode is set.
If both the CRT and PANEL are enabled info->edid_data is used after
being freed and is freed twice.
The string returned by of_get_property(np, "mode", &len) is just
written over either the static "640x480-16@60" or the module parameter
string without any regard for the length (which is most likely longer).
Use kstrump() for the OF mode and free everything before freeing 'info.
Fixes: 4295f9bf74a88 ("video, sm501: add OF binding to support SM501")
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
A comment in drivers/video/fbdev/core/fbcon.c incorrectly refers to
CONFIG_MISC_TILEBLITTING instead of CONFIG_FB_TILEBLITTING. Correct it.
Discovered while searching for CONFIG_* symbols referenced in code but
not defined in any Kconfig file.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The text display code used in the Risc PC kernel image decompression
code uses arch/arm/boot/compressed/font.c, which includes
lib/fonts/font_acorn_8x8.c, which further includes <linux/font.h>.
Since commit 97df8960240a ("lib/fonts: Provide helpers for calculating
glyph pitch and size") <linux/font.h> contains inline functions that
require __do_div64, which is not linked into the ARM kernel
decompressor. This makes Risc PC zImages fail to build.
Resolve this issue by defining the BOOTLOADER symbol and use it to avoid
a static declaration of the acorndata_8x8 symbol. That way it can be
referenced by the arm bootloader, and other static math functions and
symbols (like __do_div64) stay static and don't get unneccesary included
in the ARM kernel bootloader decompressor object file.
Fixes: 97df8960240a ("lib/fonts: Provide helpers for calculating glyph pitch and size")
Reported-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Use the result of strscpy() for the overflow check.
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
There are no callers of fbcon outside fbdev. Move the declarations
into the internal header.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Handle console remapping in fbcon in fb_switch_output(). Vga-switcheroo
invokes this functionality before switching physical outputs to a new
graphics device. Open-coding fbcon state in vga-switcheroo exposed fbdev
implementation details.
Vga-switcheroo is used for switching physical outputs among graphics
hardware. This functionality is only supported by DRM drivers. A later
update will further move fb_switch_output() into DRM's fbdev emulation;
thus fully decoupling vga-switcheroo from fbdev.
v3:
- remove Kconfig dependency related to fbcon (Geert)
v2:
- use '#if defined' (Helge)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
