| Age | Commit message (Collapse) | Author |
|---|
|
We have a 4 bytes hole in the structure, reorder some fields so that we
eliminate the hole and reduce the structure size from 144 bytes down to
136 bytes. This way on a 4K page system, we can fit 30 structures per
page instead of 28.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The unit field always has a value matching the sector size, and since we
have a block group pointer in the structure, we can access the block group
and then its fs_info field to get to the sector size. So remove the field,
which will allow us later to shrink the structure size.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There's no need for the start field, we can take it from the block group.
This reduces the structure size from 152 bytes down to 144 bytes, so on
a 4K page system we can now fit 28 structures instead of 26.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We are currently allocating the free space control structures for block
groups using the generic slabs, and given that the size of the
btrfs_free_space_ctl structure is 152 bytes (on a release kernel), we end
up using the kmalloc-192 slab and therefore waste quite some memory since
on a 4K page system we can only fit 21 free space control structures per
page. These structures are allocated and delallocated every time we create
and remove block groups.
So use a kmem_cache for free space control structures, this way on a 4K
page system we can fit 26 structures instead of 21.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We currently have several holes in the structure:
struct btrfs_block_group {
struct btrfs_fs_info * fs_info; /* 0 8 */
struct btrfs_inode * inode; /* 8 8 */
spinlock_t lock __attribute__((__aligned__(4))); /* 16 4 */
/* XXX 4 bytes hole, try to pack */
u64 start; /* 24 8 */
u64 length; /* 32 8 */
u64 pinned; /* 40 8 */
u64 reserved; /* 48 8 */
u64 used; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
u64 delalloc_bytes; /* 64 8 */
u64 bytes_super; /* 72 8 */
u64 flags; /* 80 8 */
u64 cache_generation; /* 88 8 */
u64 global_root_id; /* 96 8 */
u64 remap_bytes; /* 104 8 */
u32 identity_remap_count; /* 112 4 */
/* XXX 4 bytes hole, try to pack */
u64 last_used; /* 120 8 */
/* --- cacheline 2 boundary (128 bytes) --- */
u64 last_remap_bytes; /* 128 8 */
u32 last_identity_remap_count; /* 136 4 */
/* XXX 4 bytes hole, try to pack */
u64 last_flags; /* 144 8 */
u32 bitmap_high_thresh; /* 152 4 */
u32 bitmap_low_thresh; /* 156 4 */
struct rw_semaphore data_rwsem __attribute__((__aligned__(8))); /* 160 40 */
/* --- cacheline 3 boundary (192 bytes) was 8 bytes ago --- */
long unsigned int full_stripe_len; /* 200 8 */
long unsigned int runtime_flags; /* 208 8 */
unsigned int ro; /* 216 4 */
int disk_cache_state; /* 220 4 */
int cached; /* 224 4 */
/* XXX 4 bytes hole, try to pack */
struct btrfs_caching_control * caching_ctl; /* 232 8 */
struct btrfs_space_info * space_info; /* 240 8 */
struct btrfs_free_space_ctl * free_space_ctl; /* 248 8 */
/* --- cacheline 4 boundary (256 bytes) --- */
struct rb_node cache_node __attribute__((__aligned__(8))); /* 256 24 */
struct list_head list; /* 280 16 */
refcount_t refs __attribute__((__aligned__(4))); /* 296 4 */
/* XXX 4 bytes hole, try to pack */
struct list_head cluster_list; /* 304 16 */
/* --- cacheline 5 boundary (320 bytes) --- */
struct list_head bg_list; /* 320 16 */
struct list_head ro_list; /* 336 16 */
atomic_t frozen __attribute__((__aligned__(4))); /* 352 4 */
/* XXX 4 bytes hole, try to pack */
struct list_head discard_list; /* 360 16 */
int discard_index; /* 376 4 */
/* XXX 4 bytes hole, try to pack */
/* --- cacheline 6 boundary (384 bytes) --- */
u64 discard_eligible_time; /* 384 8 */
u64 discard_cursor; /* 392 8 */
enum btrfs_discard_state discard_state; /* 400 4 */
/* XXX 4 bytes hole, try to pack */
struct list_head dirty_list; /* 408 16 */
struct list_head io_list; /* 424 16 */
struct btrfs_io_ctl io_ctl; /* 440 72 */
/* --- cacheline 8 boundary (512 bytes) --- */
atomic_t reservations __attribute__((__aligned__(4))); /* 512 4 */
atomic_t nocow_writers __attribute__((__aligned__(4))); /* 516 4 */
struct mutex free_space_lock __attribute__((__aligned__(8))); /* 520 32 */
bool using_free_space_bitmaps; /* 552 1 */
bool using_free_space_bitmaps_cached; /* 553 1 */
/* XXX 2 bytes hole, try to pack */
int swap_extents; /* 556 4 */
u64 alloc_offset; /* 560 8 */
u64 zone_unusable; /* 568 8 */
/* --- cacheline 9 boundary (576 bytes) --- */
u64 zone_capacity; /* 576 8 */
u64 meta_write_pointer; /* 584 8 */
struct btrfs_chunk_map * physical_map; /* 592 8 */
struct list_head active_bg_list; /* 600 16 */
struct work_struct zone_finish_work; /* 616 32 */
/* --- cacheline 10 boundary (640 bytes) was 8 bytes ago --- */
struct extent_buffer * last_eb; /* 648 8 */
enum btrfs_block_group_size_class size_class; /* 656 4 */
/* XXX 4 bytes hole, try to pack */
u64 reclaim_mark; /* 664 8 */
/* size: 672, cachelines: 11, members: 61 */
/* sum members: 634, holes: 10, sum holes: 38 */
/* forced alignments: 8 */
/* last cacheline: 32 bytes */
} __attribute__((__aligned__(8)));
Reorder some fields to eliminate the holes while keeping closely related
or frequently accessed fields together. After the reordering the size of
the structure is reduced down to 632 bytes and the number of cache lines
decreases from 11 to 10. We can still only pack 6 block groups per 4K page
but on a 64K page system we will now be able to pack 103 block groups
instead of 97. The new structure layout, on a release kernel, is the
following:
struct btrfs_block_group {
struct btrfs_fs_info * fs_info; /* 0 8 */
struct btrfs_inode * inode; /* 8 8 */
spinlock_t lock __attribute__((__aligned__(4))); /* 16 4 */
unsigned int ro; /* 20 4 */
u64 start; /* 24 8 */
u64 length; /* 32 8 */
u64 pinned; /* 40 8 */
u64 reserved; /* 48 8 */
u64 used; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
u64 delalloc_bytes; /* 64 8 */
u64 bytes_super; /* 72 8 */
u64 flags; /* 80 8 */
u64 cache_generation; /* 88 8 */
u64 global_root_id; /* 96 8 */
u64 remap_bytes; /* 104 8 */
u32 identity_remap_count; /* 112 4 */
u32 last_identity_remap_count; /* 116 4 */
u64 last_used; /* 120 8 */
/* --- cacheline 2 boundary (128 bytes) --- */
u64 last_remap_bytes; /* 128 8 */
u64 last_flags; /* 136 8 */
u32 bitmap_high_thresh; /* 144 4 */
u32 bitmap_low_thresh; /* 148 4 */
struct rw_semaphore data_rwsem __attribute__((__aligned__(8))); /* 152 40 */
/* --- cacheline 3 boundary (192 bytes) --- */
long unsigned int full_stripe_len; /* 192 8 */
long unsigned int runtime_flags; /* 200 8 */
int disk_cache_state; /* 208 4 */
int cached; /* 212 4 */
struct btrfs_caching_control * caching_ctl; /* 216 8 */
struct btrfs_space_info * space_info; /* 224 8 */
struct btrfs_free_space_ctl * free_space_ctl; /* 232 8 */
struct rb_node cache_node __attribute__((__aligned__(8))); /* 240 24 */
/* --- cacheline 4 boundary (256 bytes) was 8 bytes ago --- */
struct list_head list; /* 264 16 */
refcount_t refs __attribute__((__aligned__(4))); /* 280 4 */
atomic_t frozen __attribute__((__aligned__(4))); /* 284 4 */
struct list_head cluster_list; /* 288 16 */
struct list_head bg_list; /* 304 16 */
/* --- cacheline 5 boundary (320 bytes) --- */
struct list_head ro_list; /* 320 16 */
struct list_head discard_list; /* 336 16 */
int discard_index; /* 352 4 */
enum btrfs_discard_state discard_state; /* 356 4 */
u64 discard_eligible_time; /* 360 8 */
u64 discard_cursor; /* 368 8 */
struct list_head dirty_list; /* 376 16 */
/* --- cacheline 6 boundary (384 bytes) was 8 bytes ago --- */
struct list_head io_list; /* 392 16 */
struct btrfs_io_ctl io_ctl; /* 408 72 */
/* --- cacheline 7 boundary (448 bytes) was 32 bytes ago --- */
atomic_t reservations __attribute__((__aligned__(4))); /* 480 4 */
atomic_t nocow_writers __attribute__((__aligned__(4))); /* 484 4 */
struct mutex free_space_lock __attribute__((__aligned__(8))); /* 488 32 */
/* --- cacheline 8 boundary (512 bytes) was 8 bytes ago --- */
bool using_free_space_bitmaps; /* 520 1 */
bool using_free_space_bitmaps_cached; /* 521 1 */
/* XXX 2 bytes hole, try to pack */
/* Bitfield combined with previous fields */
static enum btrfs_block_group_size_class size_class; /* 0: 0 0 */
int swap_extents; /* 524 4 */
u64 alloc_offset; /* 528 8 */
u64 zone_unusable; /* 536 8 */
u64 zone_capacity; /* 544 8 */
u64 meta_write_pointer; /* 552 8 */
struct btrfs_chunk_map * physical_map; /* 560 8 */
struct list_head active_bg_list; /* 568 16 */
/* --- cacheline 9 boundary (576 bytes) was 8 bytes ago --- */
struct work_struct zone_finish_work; /* 584 32 */
struct extent_buffer * last_eb; /* 616 8 */
u64 reclaim_mark; /* 624 8 */
/* size: 632, cachelines: 10, members: 60, static members: 1 */
/* sum members: 630, holes: 1, sum holes: 2 */
/* sum bitfield members: 8 bits (1 bytes) */
/* forced alignments: 8 */
/* last cacheline: 56 bytes */
} __attribute__((__aligned__(8)));
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We are currently allocating block groups using the generic slabs, and
given that the size of btrfs_block_group structure is 672 bytes (on a
release kernel), we end up using the kmalloc-1024 slab and therefore
waste quite some memory since on a 4K page system we can only fit 4
block groups per page. The block groups are also allocated and
delallocated with some frequency, specially if we have auto reclaim
enabled.
So use a kmem_cache for block groups, this way on a 4K page system we
can fit 6 block groups per page instead of 4.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We have support for optional string to be printed in ASSERT() (added in
19468a623a9109 ("btrfs: enhance ASSERT() to take optional format
string")), it's not yet everywhere it could be so add a few more files.
Try to finish what was left after 1c094e6ccead7a ("btrfs: make a few
more ASSERTs verbose").
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Many ioctl handlers are suitable for the AUTO_KFREE conversions as the
data are temporary and short lived. The conversions are trivial or the
collateral changes are straightforward.
A kfree() preceding mnt_drop_write_file() is slightly more efficient but
in the reverse order (i.e. the automatic kfree) does not cause any
significant change as the write drop does only a few simple operations.
Note: __free() handles also error pointers, so this is safe for the
memdup_user() errors too.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There's one use of kmalloc_array() that can be transformed to
kmalloc_objs() in the same way as suggested in commit 69050f8d6d075d
("treewide: Replace kmalloc with kmalloc_obj for non-scalar types"),
swap the arguments and drop GFP flags. All the other cases of
kmalloc_array() do not use a simple type so this is the only one.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Do a few more (trivial) conversions that started in commit 69050f8d6d075d
("treewide: Replace kmalloc with kmalloc_obj for non-scalar types").
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There are only two possible types of the delayed ref action, this can be
verified at the beginning for the whole function and not just one block.
Replace the assertion with a debugging warning just in case.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
For a simple if + WARN_ON we should use the condition directly in the
macro.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The folio checked flag is only utilized by the COW fixup mechanism
inside btrfs.
Since the COW fixup is already removed from non-experimental builds,
there is no need to keep the checked subpage bitmap.
This will saves us some space for large folios, for example for a single
256K sized large folio on 4K page sized systems:
Old bitmap size = 6 * (256K / 4K / 8) = 48 bytes
New bitmap size = 5 * (256K / 4K / 8) = 40 bytes
This will be more obvious when we're going to support huge folios (order
= 9).
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BACKGROUND]
Btrfs has a special mechanism called COW fixup, which detects dirty
pages without an ordered extent (folio ordered flag).
Normally a dirty folio must go through delayed allocation (delalloc)
before it can be submitted, and delalloc will create an ordered extent
for it and mark the range with ordered flag.
However in older kernels, there are bugs related to get_user_pages()
which can lead to some page marked dirty but without notifying the fs to
properly prepare them for writeback.
In that case without an ordered extent btrfs is unable to properly
submit such dirty folios, thus the COW fixup mechanism is introduced,
which do the extra space reservation so that they can be written back
properly.
[MODERN SOLUTIONS]
The MM layer has solved it properly now with the introduction of
pin_user_pages*(), so we're handling cases that are no longer valid.
So commit 7ca3e84980ef ("btrfs: reject out-of-band dirty folios during
writeback") is introduced to change the behavior from going through
COW fixup to rejecting them directly for experimental builds.
So far it works fine, but when errors are injected into the IO path, we
have random failures triggering the new warnings.
It looks like we have error path that cleared the ordered flag but
leaves the folio dirty flag, which later triggers the warning.
[REMOVAL OF COW FIXUP]
Although I hope to fix all those known warnings cases, I just can not
figure out the root cause yet.
But on the other hand, if we remove the ordered and checked flags in the
future, and purely rely on the dirty flags and ordered extent search, we
can get a much cleaner handling.
Considering it's no longer hitting the COW fixup for normal IO paths, I
think it's finally the time to remove the COW fixup completely.
Furthermore, the function name "btrfs_writepage_cow_fixup()" is no
longer meaningful, and since it's pretty small, only a folio flag check
with error message, there is no need to put it as a dedicated helper,
just open code it inside extent_writepage_io().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Commit 6e181cfe2409 ("btrfs: revalidate cached tree blocks on the
uptodate path") introduced the @check parameter for
btrfs_buffer_uptodate() to allow re-validation of a cached extent
buffer.
But there are still call sites that don't utilize this parameter, which
exposes them to possible corrupted tree blocks, e.g. an empty child leaf
of a parent node, which should be rejected by btrfs_verify_level_key()
but if @check is NULL such check will be skipped and cause problems.
Thankfully for a lot of cases there is already an existing @check
structure around and we can pass it directly to btrfs_buffer_uptodate().
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Remove redundant '== false' comparisons and add unlikely() branch
prediction hints in block I/O merge path functions.
These functions (ll_new_hw_segment, ll_merge_requests_fn, and
blk_rq_merge_ok) are executed on every I/O request merge attempt,
making them critical hot paths. Data integrity check failures are
rare events, so marking these conditions as unlikely() helps the
CPU optimize the common case by improving branch prediction.
Changes:
- Replace 'func() == false' with 'unlikely(!func())' for better
code style and branch prediction
This micro-optimization reduces branch misprediction penalties in
high-frequency I/O merge paths.
Signed-off-by: Steven Feng <steven@joint-cloud.com>
Link: https://patch.msgid.link/tencent_79B652BD0CC23E093F27914380F161E7E505@qq.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Replacing strcpy() with strscpy() ensures than overflow of the target
buffer cannot happen.
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Reviewed-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20260606202744.5113-5-david.laight.linux@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The thermal testing debugfs command parser splits commands at ':' and
passes the right-hand side to the command implementation. Commands such
as deltz, tzaddtrip, tzreg, and tzunreg require a zone id, but writing
one of those command names without ':' leaves the argument pointer NULL.
The command implementations parse the id with sscanf(arg, "%d", ...), so
the missing-argument form dereferences a NULL pointer from the debugfs
write path.
Reject missing arguments in tt_command_exec() before calling handlers
that require an id.
Fixes: f6a034f2df42 ("thermal: Introduce a debugfs-based testing facility")
Assisted-by: Codex:gpt-5.5-cyber-preview
Signed-off-by: Samuel Moelius <sam.moelius@trailofbits.com>
Link: https://patch.msgid.link/20260605185212.2491144-1-sam.moelius@trailofbits.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
aix_partition() reads the physical volume descriptor into a fixed-size
struct pvd and then scans its physical-partition-extent array:
int numpps = be16_to_cpu(pvd->pp_count);
...
for (i = 0; i < numpps; i += 1) {
struct ppe *p = pvd->ppe + i;
...
lp_ix = be16_to_cpu(p->lp_ix);
pvd points at a single kmalloc()'d struct pvd whose ppe[] member holds a
fixed ARRAY_SIZE(pvd->ppe) (1016) entries, but the loop runs up to the
on-disk pp_count. pp_count is an unvalidated __be16 read straight from
the descriptor, so a crafted AIX image with pp_count larger than 1016
drives the loop to read pvd->ppe[i] past the end of the allocation (up
to 65535 entries, ~2 MB out of bounds).
The partition scan runs without mounting anything, when a block device
with a crafted AIX/IBM partition table appears (an attacker-supplied
image attached with losetup -P, or a device auto-scanned by udev), via
msdos_partition() -> aix_partition().
Clamp the scan to the number of entries the ppe[] array can hold.
Fixes: 6ceea22bbbc8 ("partitions: add aix lvm partition support files")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Acked-by: Philippe De Muyter <phdm@macqel.be>
Link: https://patch.msgid.link/20260607064137.302574-1-hexlabsecurity@proton.me
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add Arrow Lake CPU models to the support list.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Changelog tweak ]
Link: https://patch.msgid.link/20260605173054.2050476-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add entry in Stratix10 service layer that allow client to retrieve the ATF
version at runtime, which is useful for system diagnostics, compatibility
checks, and ensuring the correct secure firmware is in use.
The change introduces:
- A new service command definition in the Stratix10 service layer to
initiate the ATF version query.
- A corresponding macro definition in the header file to expose the command
ID for use by other components.
The service layer uses a Secure Monitor Call (SMC) to communicate with the
ATF and retrieve the version string, which can then be logged or validated
by client application.
Signed-off-by: Tze Yee Ng <tze.yee.ng@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Writes to the reboot_image sysfs attribute went through rsu_send_msg(),
which unconditionally takes priv->lock with mutex_lock(). If another RSU
operation is in flight (e.g. a DCMF status query from probe or a
concurrent sysfs read path), userspace writers get stuck in the kernel
waiting on the mutex instead of being told the device is busy.
Split rsu_send_msg() into an inner __rsu_send_msg_locked() helper that
performs the SMC transaction with the caller holding priv->lock, plus
two thin wrappers: rsu_send_msg() preserves the original blocking
behaviour for existing callers, and rsu_try_send_msg() uses
mutex_trylock() and returns -EBUSY immediately when the lock is held.
Use rsu_try_send_msg() from reboot_image_store() so the write returns
-EBUSY without blocking when an RSU operation is already running.
Userspace can retry on -EBUSY. No functional change for other sysfs
attributes.
This keeps blocking rsu_send_msg() for existing callers, add
rsu_try_send_msg() with -EBUSY only for reboot_image_store(). That
matches the original goal (avoid a second reboot_image write blocking
behind priv->lock) without changing sysfs behaviour for the other
attributes. The earlier idea of using mutex_trylock() in all of
rsu_send_msg() and returning -EAGAIN would have been harder to justify
for userspace (echo does not retry on that).
Tze Yee tested the patch on an Agilex SoC devkit.
[Test 1] Idle reboot_image write (success path)
Result:
# insmod stratix10-rsu.ko
# echo 0x01000000 > .../reboot_image
# echo "exit=$?"
exit=0
# ./rsu_client --log
VERSION: 0x00000202
STATE: 0x00000000
CURRENT IMAGE: 0x0000000001000000
FAIL IMAGE: 0x0000000000000000
ERROR LOC: 0x00000000
ERROR DETAILS: 0x00000000
RETRY COUNTER: 0x00000000
Operation completed
[Test 2] reboot_image while priv->lock is held (-EBUSY path)
To get a deterministic busy window without flooding the service layer,
add a local debug helper (module parameter debug_hold_lock_sec +
kthread that holds priv->lock for N seconds after probe).
Result:
# insmod stratix10-rsu.ko debug_hold_lock_sec=60
[ 121.220904] stratix10-rsu stratix10-rsu.0: TEST: RSU lock held for
60 s - try reboot_image now
# echo 0x01000000 > .../reboot_image
-sh: echo: write error: Device or resource busy
# echo "during hold: exit=$?"
during hold: exit=1
[ 183.268706] stratix10-rsu stratix10-rsu.0: TEST: RSU lock released
# echo 0x01000000 > .../reboot_image
# echo "after release: exit=$?"
after release: exit=0
Together, these results match the intended behaviour: reboot_image
fails fast with -EBUSY when the RSU mutex is already held, and
succeeds once the lock is available.
Assisted-by: Claude:claude-opus-4-7
Tested-by: Tze Yee Ng <tze.yee.ng@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
The conservative governor documentation incorrectly states that setting
freq_step to 0 will use the default 5% frequency step. In reality, since
at least commit 8e677ce83bf4 ("[CPUFREQ] conservative: fixup governor to
function more like ondemand logic"), freq_step=0 has always caused the
governor to skip frequency updates entirely.
Correct the documentation to reflect the actual behavior: freq_step=0
disables frequency changes by the governor entirely.
Fixes: 2a0e49279850 ("cpufreq: User/admin documentation update and consolidation")
Signed-off-by: Pengjie Zhang <zhangpengjie2@huawei.com>
Reviewed-by: Zhongqiu Han <zhongqiu.han@oss.qualcomm.com>
[ rjw: Subject adjustment ]
Link: https://patch.msgid.link/20260603055635.1549943-1-zhangpengjie2@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Pull amd-pstate fixes for 7.1 (2026-06-02) from Mario Limonciello:
"* Fix a kdoc issue
* Fix an issue setting performance state in EPP mode introduced earlier in
the cycle from new 7.1 content"
* tag 'amd-pstate-v7.1-2026-06-02' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq/amd-pstate: Fix setting EPP in performance mode
cpufreq/amd-pstate: drop stale @epp_cached kdoc
|
|
Convert the xtfpga I2S controller plain-text binding documentation
to standard dt-schema.
The hardware requires exactly one memory region, one interrupt line,
and one phandle to the master clock. Verified these constraints against
the driver source in sound/soc/xtensa/xtfpga-i2s.c.
Also explicitly define the '#sound-dai-cells' property, as it is
required for audio routing but was omitted from the original
text properties list.
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chaitanya Sabnis <chaitanya.msabnis@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260421085635.4490-1-chaitanya.msabnis@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal driver updates for 7.2 from Daniel Lezcano:
- Add the QCom Nord temperature sensor DT bindings (Deepti Jaggi)
- Use devm_add_action_or_reset() for clock disable on the NVidia
soctherm and switch to devm cooling device registration version
(Daniel Lezcano)
- Replace the devm version implementation by the helper doing the same
thing (Daniel Lezcano)
- Add the Amlogic T7 thermal sensor along with thermal calibration
data read from SMC calls (Ronald Claveau)
- Fix typo in comment, "uppper" with "upper" in the TSens QCom driver
(Jinseok Kim)
- Add the QCom Shikra temperature sensor DT bindings (Gaurav Kohli)
- Add the QCom Hawi temperature sensor DT bindings (Dipa Ramesh Mantre)
- Fix atomic temperature read in the QCom tsens to comply with
hardware documentation (Priyansh Jain)
- Fix trailing whitespace and repeated word in the OF code. Do not
split quoted string across lines in the iMX7 driver (Mayur Kumar)
- Add SpacemiT K1 thermal sensor support (Shuwei Wu)
- Add the i.MX93 temperature sensor support and filter out the invalid
temperature (Jacky Bai)
- Enable by default the TMU (Thermal Monitoring Unit) on Exynos
platform (Krzysztof Kozlowski)
- Split the core code and the OF which are interleaved. Add the
cooling device per index registration in order to support dedicated
cooling devices controller (Daniel Lezcano)
- Add DT binding to specify an index in the cooling device map (Gaurav
Kohli)
- Rework interrupt initialization in the Tsens driver and add the
optional wakeup source (Priyansh Jain)"
* tag 'thermal-v7.2-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (34 commits)
thermal/drivers/qcom/tsens: Disable wakeup interrupt setup on automotive targets
thermal/drivers/qcom/tsens: Switch wake IRQ handling to PM callbacks
thermal/core: Fix missing stub for devm_thermal_cooling_device_register
dt-bindings: thermal: cooling-devices: Update support for 3 cells cooling device
thermal/of: Support cooling device ID in cooling-spec
thermal/of: Pass cdev_id and introduce devm registration helper
thermal/of: Add cooling device ID support
thermal/of: Rename the devm_thermal_of_cooling_device_register() function
thermal/core: Make cooling device OF node conditional on CONFIG_THERMAL_OF
thermal/of: Move cooling device OF helpers out of thermal core
hwmon: Use non-OF thermal cooling device registration API
thermal/core: Add devm_thermal_cooling_device_register()
thermal/core: Introduce non-OF thermal_cooling_device_register()
thermal/drivers/samsung: Enable TMU by default
thermal/driver/qoriq: Workaround unexpected temperature readings from tmu
thermal/drivers/qoriq: Add i.MX93 tmu support
dt-bindings: thermal: qoriq: Add compatible string for imx93
thermal/drivers/spacemit/k1: Add thermal sensor support
dt-bindings: thermal: Add SpacemiT K1 thermal sensor
thermal/drivers/imx: Do not split quoted string across lines
...
|
|
Replace strcpy with strscpy in drivers/md/dm-zoned-metadata.c.
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull OPP updates for 7.2 from Viresh Kumar:
"- Fix memory leak and a potential race in the OPP core (Abdun Nihaal,
and Di Shen).
- Mark Rust OPP methods as inline (Nicolás Antinori)"
* tag 'opp-updates-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
opp: rust: mark OPP methods as inline
OPP: of: Fix potential memory leak in opp_parse_supplies()
OPP: Fix race between OPP addition and lookup
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull CPUFreq Arm updates for 7.2 from Viresh Kumar:
"- Add cpufreq scaling support for Qualcomm Shikra SoC (Taniya Das, and
Imran Shaik).
- Minor fixes for cpufreq drivers (Krzysztof Kozlowski, Akashdeep Kaur,
Hans Zhang, Guangshuo Li, and Xueqin Luo)."
* tag 'cpufreq-arm-updates-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: ti: Add EPROBE_DEFER for K3 SoCs
cpufreq: qcom: Add cpufreq scaling support for Qualcomm Shikra SoC
dt-bindings: cpufreq: Document Qualcomm Shikra SoC EPSS
cpufreq: cppc: mask Desired_Excursion when autonomous selection is enabled
cpufreq: qcom-cpufreq-hw: Fix possible double free
cpufreq: apple-soc: Use FIELD_MODIFY()
cpufreq/amd-pstate: Use FIELD_MODIFY()
cpufreq: qcom: Unify user-visible "Qualcomm" name
|
|
When building for m68k with CONFIG_M68000=y and C=1:
drivers/clk/rockchip/clk-rk3528.c: note: in included file (through include/linux/hash.h, include/linux/slab.h):
arch/m68k/include/asm/hash.h:57:24: warning: cast truncates bits from constant value (18720 becomes 8720)
arch/m68k/include/asm/hash.h:57:24: warning: cast truncates bits from constant value (1e8e8 becomes e8e8)
Sparse does not realize the truncation is intentional.
Make this explicit by using the lower_16_bits() helper instead, which
also masks the unwanted bits.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202605191434.PQkj2Rki-lkp@intel.com/
Reported-by: Heiko Stuebner <heiko@sntech.de>
Closes: https://lore.kernel.org/20260603213726.1025094-1-heiko@sntech.de/
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Daniel Palmer <daniel@thingy.jp>
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Link: https://patch.msgid.link/b55e9bd0532c0cad519809c86e0a8400060d75a1.1780559561.git.geert@linux-m68k.org
|
|
acpi_processor_register_idle_driver()
Commit 7a8c994cbb2d ("ACPI: processor: idle: Optimize ACPI idle
driver registration") moved the ACPI idle driver registration to
acpi_processor_driver_init(), but it didn't check whether a cpuidle
driver was already registered.
For example, on Intel platforms, if the intel_idle driver is already
loaded, the code would still evaluate the _CST object in the ACPI
table and attempt to register the acpi_idle driver. This registration
would fail with -EBUSY due to the existing check in cpuidle_register_driver.
Add a check at the beginning of acpi_processor_register_idle_driver()
to avoid unnecessary _CST evaluate and potential registration failures.
Fixes: 7a8c994cbb2d ("ACPI: processor: idle: Optimize ACPI idle driver registration")
Signed-off-by: Tony W Wang-oc <TonyWWang-oc@zhaoxin.com>
Link: https://patch.msgid.link/20260608190359.3254-1-TonyWWang-oc@zhaoxin.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
acpi_ipmi_space_handler() takes an extra reference on tx_msg before
checking whether the selected IPMI device is dead. The reference
belongs to the tx_msg_list entry and is normally dropped by
ipmi_cancel_tx_msg() or ipmi_flush_tx_msg() after the message is removed
from the list.
On the dead-device path, the message has not been queued yet, but the
error path still calls ipmi_msg_release() directly. That bypasses
kref_put() and frees tx_msg while the queued-message reference is still
recorded in the kref count.
Take the queued-message reference only after the dead-device check
succeeds, immediately before adding tx_msg to the list.
Fixes: 7b9844772237 ("ACPI / IPMI: Add reference counting for ACPI IPMI transfers")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Link: https://patch.msgid.link/20260603163108.2149359-1-dbgh9129@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The definition of reg->access_width changes depending on the
reg->space_id type. Type ACPI_ADR_SPACE_PLATFORM_COMM uses
access_width to indicate the PCC region, which can result in a UBSAN
if the value is greater than 4.
For example:
UBSAN: shift-out-of-bounds in drivers/acpi/cppc_acpi.c:1090:9
shift exponent 32 is too large for 32-bit type 'int'
CPU: 61 UID: 0 PID: 1220 Comm: (udev-worker) Not tainted 7.0.10-201.fc44.aarch64 #1 PREEMPT(lazy)
Hardware name: To be filled by O.E.M.
Call trace:
...(trimming)
ubsan_epilogue+0x10/0x48
__ubsan_handle_shift_out_of_bounds+0xdc/0x1e0
cpc_write+0x4d0/0x670
cppc_set_perf+0x18c/0x490
cppc_cpufreq_cpu_init+0x1c8/0x380 [cppc_cpufreq]
... (trimming)
Lets fix this by validating the region type, as well as whether
access_width has a value. Then since we are returning bit_width
directly for ACPI_ADR_SPACE_PLATFORM_COMM, drop the code correcting
the size.
Fixes: 2f4a4d63a193 ("ACPI: CPPC: Use access_width over bit_width for system memory accesses")
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Jarred White <jarredwhite@linux.microsoft.com>
Reviewed-by: Jarred White <jarredwhite@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <easwar.hariharan@linux.microsoft.com>
Cc: All applicable <stable@vger.kernel.org>
Link: https://patch.msgid.link/20260601235808.1113137-1-jeremy.linton@arm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
CVS (Computer Vision Sensing) is an ACPI-enumerated device that sits
inline in the CSI-2 path between the camera sensor and Intel IPU.
On platforms where CVS is present, the camera sensor's ACPI node
declares a _DEP dependency on the CVS device.
The CVS driver must be fully initialized before camera sensor drivers
probe, because CVS controls the CSI-2 link ownership handshake (via
GPIO REQ/RESP), the MIPI/CSI-2 lane configuration, and the camera
power domain. Without CVS ready, the sensor driver can bind but the
CSI-2 stream will not function correctly.
The CVS driver calls acpi_dev_clear_dependencies() at the end of its
probe() to unblock waiting consumers once it is ready.
Move the CVS HIDs from acpi_ignore_dep_ids[] to acpi_honor_dep_ids[]
so that camera sensor enumeration is deferred until the CVS driver has
finished probing, matching the behavior already in place for IVSC.
Signed-off-by: Miguel Vadillo <miguel.vadillo@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://patch.msgid.link/20260601194040.18223-1-miguel.vadillo@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit 0c5b5c40dc31 ("spi: cadence-xspi: Add COMPILE_TEST support")
allows this driver to be built for 32-bit platforms, which causes a
semantic conflict with commit 4954d4eca469 ("spi: cadence-xspi: Support
32bit and 64bit slave dma interface"), as readsq() and writesq() are
only available when targeting 64-bit platforms:
drivers/spi/spi-cadence-xspi.c: In function 'cdns_xspi_sdma_read':
drivers/spi/spi-cadence-xspi.c:601:25: error: implicit declaration of function 'readsq'; did you mean 'readsl'? [-Wimplicit-function-declaration]
601 | readsq(src, buf, len >> 3);
| ^~~~~~
| readsl
drivers/spi/spi-cadence-xspi.c: In function 'cdns_xspi_sdma_write':
drivers/spi/spi-cadence-xspi.c:623:25: error: implicit declaration of function 'writesq'; did you mean 'writesl'? [-Wimplicit-function-declaration]
623 | writesq(dst, buf, len >> 3);
| ^~~~~~~
| writesl
As there are no known 32-bit platforms that use this controller, revert
compile testing support to restrict the driver to 64-bit platforms to
avoid burdening the driver with workarounds.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Fixes: 4954d4eca469 ("spi: cadence-xspi: Support 32bit and 64bit slave dma interface")
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260606-spi-cadence-xspi-revert-compile-testing-v1-1-76219ea378bd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
After commit 9b311b7313d6 ("ACPI: NFIT: Install Notify() handler before
getting NFIT table"), ACPI NFIT driver removal may deadlock if an ACPI
notify on the NFIT device is triggered concurrently. A similar deadlock
may occur if an ACPI notify on the NFIT device is triggered during a
failing driver probe.
The deadlock is possible because acpi_dev_remove_notify_handler() calls
acpi_os_wait_events_complete() after removing the notify handler and the
driver core invokes it under the NFIT platform device lock which is also
acquired by acpi_nfit_notify(). Thus acpi_os_wait_events_complete() may
be waiting for acpi_nfit_notify() to complete, but the latter may not be
able to acquire the device lock which is being held by the driver core
while the former is being executed.
Moreover, after commit 03667e146f81 ("ACPI: NFIT: core: Convert the
driver to a platform one"), there are no sysfs notifications regarding
NVDIMM devices because __acpi_nvdimm_notify() always bails out after
checking the driver data pointer of the device's parent. That parent
is the ACPI companion of the platform device used for driver binding,
so its driver data pointer is always NULL after the commit in question
which was overlooked by it.
A remedy for the deadlock is to use a special separate lock for ACPI
notify synchronization with driver probe and removal instead of the
device lock of the NFIT device, while a remedy for the second issue
is to populate the driver data pointer of the NFIT device's ACPI
companion when the driver is ready to operate, so do both these things.
However, since the new lock is not held across the entire teardown and
acpi_nfit_notify() should do nothing when teardown is in progress, make
it check the driver data pointer of the NFIT device's ACPI companion, in
analogy with the existing check in __acpi_nvdimm_notify(), and bail out
if that pointer is NULL.
Fixes: 9b311b7313d6 ("ACPI: NFIT: Install Notify() handler before getting NFIT table")
Fixes: 03667e146f81 ("ACPI: NFIT: core: Convert the driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: All applicable <stable@vger.kernel.org> # 9995e4404ea4: ACPI: NFIT: core: Eliminate redundant local variable
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/3420096.aeNJFYEL58@rafael.j.wysocki
|
|
Eliminate local variable acpi_desc from __acpi_nvdimm_notify() because it
is redundant (its value is only checked against NULL once and the value
assigned to it may be checked directly instead) and update the subsequent
comment to reflect the code change.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/14028918.uLZWGnKmhe@rafael.j.wysocki
|
|
If acpi_nfit_init() fails after adding the acpi_desc object to the
acpi_descs list, that object is never removed from that list because
the acpi_nfit_shutdown() devm action is not added for the NFIT device
in that case. Next, the acpi_nfit_init() failure causes
acpi_nfit_probe() to fail, the acpi_desc object is freed, and a
dangling pointer is left behind in the acpi_descs. Any subsequent
ACPI Machine Check Exception will trigger nfit_handle_mce() which
iterates over acpi_descs and so a use-after-free will occur.
Moreover, if acpi_nfit_probe() returns 0 after installing a notify
handler for the NFIT device and without allocating the acpi_desc
object and setting the NFIT device's driver data pointer, the
acpi_desc object will be allocated by acpi_nfit_update_notify()
and acpi_nfit_init() will be called to initialize it. Regardless
of whether or not acpi_nfit_init() fails in that case, the
acpi_nfit_shutdown() devm action is not added for the NFIT device
and acpi_desc is never removed from the acpi_descs list. If the
acpi_desc object is freed subsequently on driver removal, any
subsequent ACPI MCE will lead to a use-after-free like in the
previous case.
To address the first issue mentioned above, make acpi_nfit_probe()
call acpi_nfit_shutdown() directly on acpi_nfit_init() failures and
to address the other one, add a remove callback to the driver and
make it call acpi_nfit_shutdown(). Also, since it is now possible to
pass NULL to acpi_nfit_shutdown() or the acpi_desc object passed to it
may not have been initialized, add checks against NULL for acpi_desc and
its nvdimm_bus field to that function and make acpi_nfit_unregister()
clear the latter after unregistering the NVDIMM bus.
Fixes: a61fe6f7902e ("nfit, tools/testing/nvdimm: unify common init for acpi_nfit_desc")
Fixes: fbabd829fe76 ("acpi, nfit: fix module unload vs workqueue shutdown race")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: All applicable <stable@vger.kernel.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/1963615.tdWV9SEqCh@rafael.j.wysocki
|
|
After commit 9b311b7313d6 ("ACPI: NFIT: Install Notify() handler before
getting NFIT table"), acpi_nfit_probe() installs an ACPI notify handler
for the NFIT device before checking the presence of the NFIT table. If
that table is not there, 0 is returned without allocating the acpi_desc
object and setting the driver data pointer of the NFIT device. If the
platform firmware triggers an NFIT_NOTIFY_UC_MEMORY_ERROR notification
on the NFIT device at that point, acpi_nfit_uc_error_notify() will
dereference a NULL pointer.
Prevent that from occurring by adding an acpi_desc check against NULL
to acpi_nfit_uc_error_notify().
Fixes: 9b311b7313d6 ("ACPI: NFIT: Install Notify() handler before getting NFIT table")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: All applicable <stable@vger.kernel.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/2418508.ElGaqSPkdT@rafael.j.wysocki
|
|
Currently, the Tegra GPC DMA hardware requires the transfer length to
be a multiple of the max burst size configured for the channel. When a
client requests a transfer where the length is not evenly divisible by
the configured max burst size, the DMA hangs with partial burst at
the end.
Fix this by reducing the burst size to the largest power-of-2 value
that evenly divides the transfer length. For example, a 40-byte
transfer with a 16-byte max burst will now use an 8-byte burst
(40 / 8 = 5 complete bursts) instead of causing a hang.
This issue was observed with the PL011 UART driver where TX DMA
transfers of arbitrary lengths were stuck.
Fixes: ee17028009d4 ("dmaengine: tegra: Add tegra gpcdma driver")
Cc: stable@vger.kernel.org
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260422064134.1323610-1-kkartik@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The Intel IOPx3xx platform was completely removed in commit b91a69d162aa
("ARM: iop32x: remove the platform"), and it'd be safe to remove an unused
and leftover platform data specific header file dma-iop32x.h also.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260114051508.3908807-1-vz@mleia.com
[vkoul: fixed subsystem tag]
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
For architectures like Microblaze or arm64 (where this IP is used),
DMA_DIRECT_REMAP is set which means that dma_alloc_coherent() might
remap (and hence vmalloc()) some memory. This became visible in a design
where dma_direct_use_pool() is not possible.
With the above, when calling dma_free_coherent(), vunmap() would be
called from softirq context and thus leading to a BUG().
To fix it, use a dma pool that is allocated in
.device_alloc_chan_resources() and allocate blocks from it. The key
point is that now dma_pool_free() is used in axi_dmac_free_desc() to
free the blocks and that just frees the blocks from the pool in the
sense they can be used again. In other words, no actual call to
dma_free_coherent() happens. That only happens when destroying the pool
in axi_dmac_free_chan_resources() which does not happen in any interrupt
context.
Fixes: 3f8fd25936ee ("dmaengine: axi-dmac: Allocate hardware descriptors")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260424-dma-dmac-handle-vunmap-v4-4-90f43412fdc0@analog.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
There's no reason to keep struct clk in struct axi_dmac. Hence, use a
local clk variable in .probe() and drop it from struct axi_dmac.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260424-dma-dmac-handle-vunmap-v4-3-90f43412fdc0@analog.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use axi_dmac_free_desc() to free fully the descriptor at fail path when
call axi_dmac_alloc_desc() in axi_dmac_prep_peripheral_dma_vec().
Fixes: 74609e568670 ("dmaengine: dma-axi-dmac: Implement device_prep_peripheral_dma_vec")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260424-dma-dmac-handle-vunmap-v4-2-90f43412fdc0@analog.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In dma_release_channel(), check chan->device->privatecnt after call
dma_chan_put(). However, dma_chan_put() call dma_device_put() which could
release the last reference of the device if the DMA provider is already
gone and hence free it.
Fixes it by moving dma_chan_put() after the check.
Fixes: 0f571515c332 ("dmaengine: Add privatecnt to revert DMA_PRIVATE property")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260424-dma-dmac-handle-vunmap-v4-1-90f43412fdc0@analog.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add a pointer to the struct acpi_device used for installing the ACPI
notify handler to struct acpi_notify_handler_devres so it need not
be retrieved from the owner device via ACPI_COMPANION() in
devm_acpi_notify_handler_release().
While at it, drop the function name from one of the messages printed
by devm_acpi_install_notify_handler() for consistency and fix up white
space in its kerneldoc comment.
No intentional functional impact.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/2841496.mvXUDI8C0e@rafael.j.wysocki
|
|
klsi_105_prepare_write_buffer() is called by the generic write path
with the bulk-out buffer and its size (bulk_out_size, 64 bytes). It
stores a two-byte length header at the start of the buffer and copies
the payload from the write fifo starting at buf + KLSI_HDR_LEN, but
passes the full buffer size as the number of bytes to copy:
count = kfifo_out_locked(&port->write_fifo, buf + KLSI_HDR_LEN,
size, &port->lock);
When the fifo holds at least size bytes, size bytes are copied starting
two bytes into the size-byte buffer, writing KLSI_HDR_LEN bytes past its
end. Copy at most size - KLSI_HDR_LEN bytes instead, leaving room for
the header as safe_serial already does.
Writing bulk_out_size or more bytes to the tty triggers a slab
out-of-bounds write, observed with KASAN by emulating the device with
dummy_hcd and raw-gadget:
BUG: KASAN: slab-out-of-bounds in kfifo_copy_out+0x83/0xc0
Write of size 64 at addr ffff888112c62202 by task python3
kfifo_copy_out
klsi_105_prepare_write_buffer [kl5kusb105]
usb_serial_generic_write_start [usbserial]
Allocated by task 139:
usb_serial_probe [usbserial]
The buggy address is located 2 bytes inside of allocated 64-byte region
The out-of-bounds write no longer occurs with this change applied.
Fixes: 60b3013cdaf3 ("USB: kl5usb105: reimplement using generic framework")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: HyeongJun An <sammiee5311@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
bpf_task_from_vpid() looks up a task in the pid namespace of the
current task, via find_task_by_vpid():
find_task_by_vpid(vpid)
find_task_by_pid_ns(vpid, task_active_pid_ns(current))
find_pid_ns(nr, ns) -> idr_find(&ns->idr, nr)
cgroup_skb programs run in softirq, which may interrupt a task that is
itself in do_exit(). Once that task has passed
exit_notify() -> release_task() -> __unhash_process(), its thread_pid is
cleared, so task_active_pid_ns(current) returns NULL and find_pid_ns()
dereferences &NULL->idr:
BUG: kernel NULL pointer dereference, address: 0000000000000050
RIP: 0010:idr_find+0x11/0x30 lib/idr.c:176
Call Trace:
<IRQ>
find_pid_ns kernel/pid.c:370 [inline]
find_task_by_pid_ns+0x3b/0xe0 kernel/pid.c:485
bpf_task_from_vpid+0x5b/0x200 kernel/bpf/helpers.c:2916
bpf_prog_run_array_cg+0x17e/0x530 kernel/bpf/cgroup.c:81
__cgroup_bpf_run_filter_skb+0x12b/0x250 kernel/bpf/cgroup.c:1612
sk_filter_trim_cap+0x1dc/0x4c0 net/core/filter.c:148
tcp_v4_rcv+0x18d1/0x2200 net/ipv4/tcp_ipv4.c:2223
</IRQ>
<TASK>
do_exit+0xa63/0x1270 kernel/exit.c:1010
get_signal+0x141c/0x1530 kernel/signal.c:3037
Bail out when current has no pid namespace.
Fixes: 675c3596ff32 ("bpf: Add bpf_task_from_vpid() kfunc")
Signed-off-by: Sechang Lim <rhkrqnwk98@gmail.com>
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/bpf/20260608050001.2545245-1-rhkrqnwk98@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
Nuoqi Gui says:
====================
Keep dynamic inner array lookups nullable
An ARRAY_OF_MAPS can use an array created with BPF_F_INNER_MAP as its
inner map template. The flag allows a concrete inner array with a
different max_entries value to replace the template.
The verifier currently uses the template's max_entries to elide
nullness for a constant-key lookup through the inner map pointer. At
runtime, the lookup uses the concrete inner array's max_entries instead.
The verifier can therefore accept an unchecked dereference even though
the runtime helper returns NULL.
Patch 1 keeps lookups through BPF_F_INNER_MAP array templates nullable.
Patch 2 adds a verifier regression test for the unchecked dereference.
Before the fix, the regression program is accepted and the runtime
reproducer triggers a NULL dereference. With the fix, both programs are
rejected with an invalid map_value_or_null access.
Tested by compiling kernel/bpf/verifier.o and
verifier_map_in_map.bpf.o, and by running the regression program and
runtime reproducer in QEMU before and after the fix.
Signed-off-by: Nuoqi Gui <gnq25@mails.tsinghua.edu.cn>
Acked-by: Jiri Olsa <jolsa@kernel.org>
---
v1->v2:
- Update the can_elide_value_nullness() comment to match the changed
parameter (const struct bpf_map *map).
v1: https://patch.msgid.link/20260604151153.2488051-1-gnq25@mails.tsinghua.edu.cn
To: Alexei Starovoitov <ast@kernel.org>
To: Daniel Borkmann <daniel@iogearbox.net>
To: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Xu <dxu@dxuuu.xyz>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Cc: Song Liu <song@kernel.org>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Ihor Solodrai <isolodrai@meta.com>
Cc: bpf@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
---
====================
Link: https://patch.msgid.link/20260607-f01-v2-v2-0-da48453146e8@mails.tsinghua.edu.cn
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
