| Age | Commit message (Collapse) | Author |
|---|
|
We use 512 A-MSDUs in an A-MPDU, not 612. Fix the typo.
Link: https://patch.msgid.link/20260531135036.62a394741a04.I2fd9e1d5dc4d467426c9061df2796ff8ba0129d4@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Ever since the TFD queue size is no longer limited to 256 entries,
this code has been wrong, and might erroneously not detect a move
if it was by a multiple of 256. Not a big deal, but fix it while
I see it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20260531135036.87ffbeab298e.I4fae41383b6756bccbed250985e0521b68a40d0c@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
NAN cannot be supported if HT is not supported, so check that
HT is supported before declaring that NAN is supported.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Link: https://patch.msgid.link/20260527230313.6274b222e849.If215f00f0cdb5eefb2507f8d0fb5734a65ce945f@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Our binding handling for P2P-Device can run into the following
scenario, as observed by our testing:
- a station interface is connected on some channel
- the P2P-Device does a remain-on-channel (ROC) on that channel
- the ROC ends, and the P2P-Device is removed from the binding,
but the phy_ctxt pointer is left around as a PHY cache so we
don't need to recalibrate to the channel again and again in
case it's not shared
- a binding update by the station interface, even a removal,
will re-add the P2P-Device to the binding
- the P2P-Device is removed, which removes the PHY context, but
it's still in the binding so the firmware crashes
Since the P2P device is removed from the binding and only re-
added by unrelated code, but we want to keep the phy_ctxt around
as a cache for future ROC usage, fix it by adding a boolean that
indicates whether or not the P2P-Device should be added to the
binding, and handle that in the binding iterator. That way, the
station interface cannot re-add the P2P-Device to the binding
when that isn't active.
Assisted-by: Github Copilot:claude-opus-4-6
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20260527230313.07f94335ae06.I384238b0859343c4a9a9dda20682be1aad89cc9d@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Add KUnit tests to verify RSSI adjustment for 6 GHz duplicated
beacons across different operational bandwidths and validate
detection of the duplicated beacon bit.
Signed-off-by: Avinash Bhatt <avinash.bhatt@intel.com>
Link: https://patch.msgid.link/20260527230313.a3500c44f5e8.Icba6ee1158e9f563a91b482b8cdd3f51ddace468@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Clearly, from a user perspective, it must be valid to configure
WoWLAN and then suspend while not connected to a network. Since
mac80211 doesn't distinguish these cases and simply calls the
driver to suspend whenever WoWLAN is configured, the driver has
to cleanly handle the case where it's called for WoWLAN, it's
not connected but there's also no netdetect configured.
Remove the WARN_ON() and keep returning 1 to disconnect and
then suspend.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20260527230313.19720967372b.Iff30814510a26f9f609f98eeea3111c50c1afb31@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
the per-rf file"
IWL_BZ_UCODE_CORE_MAX is undefined in cfg/rf-fm.c, this
causes __stringify(core) to turn it into the literal
token text, so MODULE_FIRMWARE entries are generated as
"iwlwifi...-cIWL_BZ_UCODE_CORE_MAX.ucode",
instead of the actual number.
This reverts the commit below.
Signed-off-by: Shahar Tzarfati <shahar.tzarfati@intel.com>
Link: https://patch.msgid.link/20260527230313.a10bc3359dca.I446a1340c635f07aff3efaba5317635e010c156f@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
While associated to MLD AP with active EMLSR, set all scan
operations as fast-balance scans. The only exception is when a
fragmented scan is planned (high traffic or low latency), in
which case the fragmented scan is preserved.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Link: https://patch.msgid.link/20260527230313.32d278842b0e.Ia3d73e4085eefc4d3921e93de4107b2d6a6f922e@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Add a new FW TLV (IWL_UCODE_TLV_FW_NAN_MAX_CHAN_SWITCH_TIME) that
allows the firmware to specify the NAN maximum channel switch time
in microseconds.
When the TLV is present, use its value for the NAN device capability.
Otherwise, fall back to the default of 4 milliseconds.
Signed-off-by: Israel Kozitz <israel.kozitz@intel.com>
Link: https://patch.msgid.link/20260527230313.e8ae1a3adacd.I15b933407ca3974a65047b63b4f9b00bed3520fb@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
The mimo field of the sta command is badly named. It really carries the
initial SMPS value as it is in the association request of the client
station (when we are the AP).
In NAN we don't have this information, just mark SMPS as disabled.
Link: https://patch.msgid.link/20260527230313.abd136be474e.I9eb663d953b482236345ffbcb611f28facea83c1@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
It's only needed by mvm, so there's no need to have it in
iwlwifi and export it, just move it to mvm itself.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20260527230313.87769f13c7d7.I3875d768694b9484317a3253f479a2a2100244f4@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Given that we now use v3 rates with FW index throughout,
_to_hwrate() is confusing, since the hardware still uses
the PLCP value, the driver just doesn't see that now (as
it talks to firmware, not hardware.)
Rename this to iwl_mvm_rate_idx_to_fw_idx() to more
clearly indicate what it's doing.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20260527230313.a60c8aea5b6c.I6af48d5d9748e184eed9d3437d312291cab61d7f@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
The CNVI_PMU_STEP_FLOW register address differs between device families.
For SC and newer devices, the register is at 0xA2D688,
while for BZ devices it's at 0xA2D588.
Signed-off-by: Moriya Itzchaki <moriya.itzchaki@intel.com>
Link: https://patch.msgid.link/20260527230313.f0c115c4f74e.I3c66b2e39a97f754e853ac7e7dba8e433523619e@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
We dereference the mld_sta pointer before checking for NULL.
But we do check the sta pointer, and sta != NULL means mld_sta != NULL,
so there is no real issue.
Fix it anyway to silence the warning.
Link: https://patch.msgid.link/20260527200512.506707-2-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
This command is sent in other opmodes as well. Remove the mvm prefix.
Link: https://patch.msgid.link/20260527230313.290e4d9db14a.Ia4edc64dacc8e298ab7817ab5c37843e92698b8d@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
iwl_pcie_set_hw_ready still returns the return value of iwl_poll_bits,
but the latter one no longer returns the time elapsed until success, now it
returns either success or failure.
Remove the comment entirely.
Link: https://patch.msgid.link/20260527230313.ae42da7924ec.I1a92266621dc0033afa80f022d4c45e91674fedb@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Currently, the dump code attempts to dump any number of
memories and register banks, as defined by the firmware.
Especially when the device is failing, this can lead to
excessive time spent attempting to acquire NIC access
over and over again.
Improve the code to only attempt to acquire NIC access
once or twice, but using the new memory dump functions
that may drop the spinlock etc. Mark all dump regions
that require NIC access, and skip them if we couldn't
obtain that.
In order to avoid CPU latency due to the increased time
holding the spinlock (and possibly disabling softirqs),
drop locks and call cond_resched() after each section
(if holding NIC access) but don't release HW NIC access.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20260527230313.bec886142cc8.I41f2eaf2403b38147504d5dab0a7414de2699adc@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
AX231 is a device that is based on AX211 that doesn't support 6E and
its bandwidth is limited to 80 MHz.
Just reuse the radio config from AX203 which has the exact same
characteristics.
It has a specific subdevice ID to allow the driver to differentiate
between AX211 and AX231.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20260512082114.0685ed313987.Ibcfa24e196ac778405d2843f0984b66ca167704e@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
scd30_core.c currently uses manual mutex_lock() and mutex_unlock()
calls. Replace them with the newer guard(mutex)() for cleaner RAII
patterns and to improve maintainability.
Add new helper function scd30_trigger_handler_helper() containing
the critical section for scd30_trigger_handler().
In addition, small refactor to replace "?:" operator with regular
if/else returns.
Signed-off-by: Maxwell Doose <m32285159@gmail.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> says:
This patch-set removes unused machine
Link: https://patch.msgid.link/877bogce4k.wl-kuninori.morimoto.gx@renesas.com
|
|
Not used, remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/8733z4ce3i.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Not used, remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/874ijkce3m.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Not used, remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/875x40ce3s.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Provide an s390 specific implementation of arch_this_cpu_write()
instead of the generic variant. The generic variant uses a quite
expensive raw_local_irq_save() / raw_local_irq_restore() pair.
Get rid of this by providing an own variant which makes use of the new
percpu code section infrastructure.
With this the text size of the kernel image is reduced by ~1k (defconfig).
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Provide an s390 specific implementation of arch_this_cpu_read() instead
of the generic variant. The generic variant uses preempt_disable() /
preempt_enable() pair and READ_ONCE().
Get rid of the preempt_disable() / preempt_enable() pairs by providing an
own variant which makes use of the new percpu code section infrastructure.
With this the text size of the kernel image is reduced by ~1k
(defconfig). Also 87 generated preempt_schedule_notrace() function
calls within the kernel image (modules not counted) are removed.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Convert arch_this_cpu_[and|or]() to make use of the new percpu code
section infrastructure.
There is no user of this_cpu_and() and only one user of this_cpu_or()
within the kernel. Therefore this conversion has hardly any effect,
and also removes only preempt_schedule_notrace() function call.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Convert arch_this_cpu_add_return() to make use of the new percpu code
section infrastructure.
With this the text size of the kernel image is reduced by ~4k
(defconfig). Also 66 generated preempt_schedule_notrace() function
calls within the kernel image (modules not counted) are removed.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Convert arch_this_cpu_add() to make use of the new percpu code section
infrastructure.
With this the text size of the kernel image is reduced by ~76kb
(defconfig). Also more than 5300 generated preempt_schedule_notrace()
function calls within the kernel image (modules not counted) are removed.
With:
DEFINE_PER_CPU(long, foo);
void bar(long a) { this_cpu_add(foo, a); }
Old arch_this_cpu_add() looks like this:
00000000000000c0 <bar>:
c0: c0 04 00 00 00 00 jgnop c0 <bar>
c6: eb 01 03 a8 00 6a asi 936,1
cc: c4 18 00 00 00 00 lgrl %r1,cc <bar+0xc>
ce: R_390_GOTENT foo+0x2
d2: e3 10 03 b8 00 08 ag %r1,952
d8: eb 22 10 00 00 e8 laag %r2,%r2,0(%r1)
de: eb ff 03 a8 00 6e alsi 936,-1
e4: a7 a4 00 05 jhe ee <bar+0x2e>
e8: c0 f4 00 00 00 00 jg e8 <bar+0x28>
ea: R_390_PC32DBL __s390_indirect_jump_r14+0x2
ee: c0 f4 00 00 00 00 jg ee <bar+0x2e>
f0: R_390_PLT32DBL preempt_schedule_notrace+0x2
New arch_this_cpu_add() looks like this:
00000000000000c0 <bar>:
c0: c0 04 00 00 00 00 jgnop c0 <bar>
c6: c4 38 00 00 00 00 lgrl %r3,c6 <bar+0x6>
c8: R_390_GOTENT foo+0x2
cc: b9 04 00 43 lgr %r4,%r3
d0: eb 00 43 c0 00 52 mviy 960(%r0),4
d6: e3 40 03 b8 00 08 ag %r4,952
dc: eb 52 40 00 00 e8 laag %r5,%r2,0(%r4)
e2: eb 00 03 c0 00 52 mviy 960,0
e8: c0 f4 00 00 00 00 jg e8 <bar+0x28>
ea: R_390_PC32DBL __s390_indirect_jump_r14+0x2
Note that the conditional function call is removed.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Add missing do { } while (0) constructs in order to avoid potential
build failures.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260319120503.4046659-1-hca%40linux.ibm.com
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
With the intended removal of PREEMPT_NONE this_cpu operations based on
atomic instructions, guarded with preempt_disable()/preempt_enable() pairs
become more expensive: the preempt_disable() / preempt_enable() pairs are
not optimized away anymore during compile time.
In particular the conditional call to preempt_schedule_notrace() after
preempt_enable() adds additional code and register pressure.
E.g. this simple C code sequence
DEFINE_PER_CPU(long, foo);
long bar(long a) { return this_cpu_add_return(foo, a); }
generates this code:
11a976: eb af f0 68 00 24 stmg %r10,%r15,104(%r15)
11a97c: b9 04 00 ef lgr %r14,%r15
11a980: b9 04 00 b2 lgr %r11,%r2
11a984: e3 f0 ff c8 ff 71 lay %r15,-56(%r15)
11a98a: e3 e0 f0 98 00 24 stg %r14,152(%r15)
11a990: eb 01 03 a8 00 6a asi 936,1 <- __preempt_count_add(1)
11a996: c0 10 00 d2 ac b5 larl %r1,1b70300 <- address of percpu var
11a9a0: e3 10 23 b8 00 08 ag %r1,952 <- add percpu offset
11a9a6: eb ab 10 00 00 e8 laag %r10,%r11,0(%r1) <- atomic op
11a9ac: eb ff 03 a8 00 6e alsi 936,-1 <- __preempt_count_dec_and_test()
11a9b2: a7 54 00 05 jnhe 11a9bc <bar+0x4c>
11a9b6: c0 e5 00 76 d1 bd brasl %r14,ff4d30 <preempt_schedule_notrace>
11a9bc: b9 e8 b0 2a agrk %r2,%r10,%r11
11a9c0: eb af f0 a0 00 04 lmg %r10,%r15,160(%r15)
11a9c6 07 fe br %r14
Even though the above example is more or less the worst case, since the
branch to preempt_schedule_notrace() requires a stackframe, which
otherwise wouldn't be necessary, there is also the conditional jnhe branch
instruction.
Get rid of the conditional branch with the following code sequence:
11a8e6: c0 30 00 d0 c5 0d larl %r3,1b33300
11a8ec: b9 04 00 43 lgr %r4,%r3
11a8f0: eb 00 43 c0 00 52 mviy 960,4
11a8f6: e3 40 03 b8 00 08 ag %r4,952
11a8fc: eb 52 40 00 00 e8 laag %r5,%r2,0(%r4)
11a902: eb 00 03 c0 00 52 mviy 960,0
11a908: b9 08 00 25 agr %r2,%r5
11a90c 07 fe br %r14
The general idea is that this_cpu operations based on atomic instructions
are guarded with mviy instructions:
- The first mviy instruction writes the register number, which contains
the percpu address variable to lowcore. This also indicates that a
percpu code section is executed.
- The first instruction following the mviy instruction must be the ag
instruction which adds the percpu offset to the percpu address register.
- Afterwards the atomic percpu operation follows.
- Then a second mviy instruction writes a zero to lowcore, which indicates
the end of the percpu code section.
- In case of an interrupt/exception/nmi the register number which was
written to lowcore is copied to the exception frame (pt_regs), and a zero
is written to lowcore.
- On return to the previous context it is checked if a percpu code section
was executed (saved register number not zero), and if the process was
migrated to a different cpu. If the percpu offset was already added to
the percpu address register (instruction address does _not_ point to the
ag instruction) the content of the percpu address register is adjusted so
it points to percpu variable of the new cpu.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
zcrypt_rng_device_add() allocates a buffer for the software random
number generator data cache.
This buffer can be allocated with kmalloc() as there's nothing special
about it to go directly to the page allocator.
kmalloc() provides a better API that does not require ugly casts and
kfree() does not need to know the size of the freed object.
Performance difference between kmalloc() and __get_free_pages() is not
measurable as both allocators take an object/page from a per-CPU list for
fast path allocations.
For the slow path the performance is anyway determined by the amount of
reclaim involved rather than by what allocator is used.
Replace use of get_zeroed_page() with kzalloc() and free_page() with
kfree().
Link: https://lore.kernel.org/all/635405e4-9423-4a25-a6e7-e03c8ea0bcbe@redhat.com
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
trng_read() allocates a temporary staging buffer for CPACF TRNG
random data before copying it to userspace.
This buffer can be allocated with kmalloc() as there's nothing special
about it to go directly to the page allocator.
kmalloc() provides a better API that does not require ugly casts and
kfree() does not need to know the size of the freed object.
Performance difference between kmalloc() and __get_free_pages() is not
measurable as both allocators take an object/page from a per-CPU list for
fast path allocations.
For the slow path the performance is anyway determined by the amount of
reclaim involved rather than by what allocator is used.
Replace use of __get_free_page() with kmalloc() and free_page() with
kfree().
Link: https://lore.kernel.org/all/635405e4-9423-4a25-a6e7-e03c8ea0bcbe@redhat.com
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
qeth_get_trap_id() allocates a temporary buffer for STSI system
information queries used to build trap identification strings.
This buffer can be allocated with kmalloc() as there's nothing special
about it to go directly to the page allocator.
kmalloc() provides a better API that does not require ugly casts and
kfree() does not need to know the size of the freed object.
Performance difference between kmalloc() and __get_free_pages() is not
measurable as both allocators take an object/page from a per-CPU list for
fast path allocations.
For the slow path the performance is anyway determined by the amount of
reclaim involved rather than by what allocator is used.
Replace use of get_zeroed_page() with kzalloc() and free_page() with
kfree().
Link: https://lore.kernel.org/all/635405e4-9423-4a25-a6e7-e03c8ea0bcbe@redhat.com
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
hvc_iucv_alloc() allocates a send staging buffer for accumulating
outbound terminal characters before they are copied into a separate
IUCV message buffer for transmission to the hypervisor. The staging
buffer itself is never passed to any IUCV function.
This buffer can be allocated with kmalloc() as there's nothing special
about it to go directly to the page allocator.
kmalloc() provides a better API that does not require ugly casts and
kfree() does not need to know the size of the freed object.
Performance difference between kmalloc() and __get_free_pages() is not
measurable as both allocators take an object/page from a per-CPU list for
fast path allocations.
For the slow path the performance is anyway determined by the amount of
reclaim involved rather than by what allocator is used.
Replace use of get_zeroed_page() with kzalloc() and free_page() with
kfree().
Link: https://lore.kernel.org/all/635405e4-9423-4a25-a6e7-e03c8ea0bcbe@redhat.com
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
DASD driver uses get_zeroed_page() to allocate pages for the Extended Error
Reporting software ring buffer and for a scratch buffer for formatting
sense dump diagnostic text.
These buffers can be allocated with kmalloc() as there's nothing special
about it to go directly to the page allocator.
kmalloc() provides a better API that does not require ugly casts and
kfree() does not need to know the size of the freed object.
Performance difference between kmalloc() and __get_free_pages() is not
measurable as both allocators take an object/page from a per-CPU list for
fast path allocations.
For the slow path the performance is anyway determined by the amount of
reclaim involved rather than by what allocator is used.
Replace use of get_zeroed_page() with kzalloc() and free_page() with
kfree().
Link: https://lore.kernel.org/all/635405e4-9423-4a25-a6e7-e03c8ea0bcbe@redhat.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
con3270_alloc_view() allocates a staging buffer used to assemble
3270 datastream content before it is copied into channel program
requests.
This buffer can be allocated with kmalloc() as there's nothing special
about it to go directly to the page allocator.
kmalloc() provides a better API that does not require ugly casts and
kfree() does not need to know the size of the freed object.
Performance difference between kmalloc() and __get_free_pages() is not
measurable as both allocators take an object/page from a per-CPU list for
fast path allocations.
For the slow path the performance is anyway determined by the amount of
reclaim involved rather than by what allocator is used.
Replace use of __get_free_page() with kmalloc() and free_page() with
kfree().
Link: https://lore.kernel.org/all/635405e4-9423-4a25-a6e7-e03c8ea0bcbe@redhat.com
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Move GR_NUM / VX_NUM macros to separate insn-common-asm.h header file
so they can be reused for non-fpu insn constructs.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Use the ".irp" directive to get rid of all the repeated ".ifc" usages
in fpu-insn-asm.h.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Rearrange some fields within AP and zcrypt structs to reduce
memory consumption and unused holes with the help of pahole
analysis of the code.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Finn Callies <fcallies@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The FSP Chain of Trust handshake is versioned: Hopper speaks version 1
and Blackwell speaks version 2. Provide the version through the FSP HAL
so the boot message carries the value FSP expects, and so chipsets that
do not use FSP need not express a version at all.
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Eliot Courtney <ecourtney@nvidia.com>
Link: https://patch.msgid.link/20260603-b4-blackwell-v13-5-d9f3a06939e0@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
|
|
FSP exchanges are request/response: the driver sends an MCTP/NVDM
message and must match the reply against the request before acting on
it. Add the synchronous send-and-wait path that validates the response
transport and message headers and confirms the reply corresponds to the
request that was sent.
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Eliot Courtney <ecourtney@nvidia.com>
Link: https://patch.msgid.link/20260603-b4-blackwell-v13-4-d9f3a06939e0@nvidia.com
[acourbot: make `MessageToFsp` private.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
|
|
Add the MCTP (Management Component Transport Protocol) and NVDM (NVIDIA
Data Model) wire-format types used for communication between the kernel
driver and GPU firmware processors.
This includes typed MCTP transport headers, NVDM message headers, and
NVDM message type identifiers. Both the FSP boot path and the upcoming
GSP RPC message queue share this protocol layer.
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Eliot Courtney <ecourtney@nvidia.com>
Link: https://patch.msgid.link/20260603-b4-blackwell-v13-3-d9f3a06939e0@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
|
|
FSP communication uses a pair of non-circular queues in the FSP
falcon's EMEM, one for messages from the driver to FSP and one for
replies, with the driver polling for response data. Add the queue
registers and the low-level helpers used by the higher-level FSP
message layer.
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Eliot Courtney <ecourtney@nvidia.com>
Link: https://patch.msgid.link/20260603-b4-blackwell-v13-2-d9f3a06939e0@nvidia.com
[acourbot: align register fields names with OpenRM.]
[acourbot: represent registers as arrays of 8 instances, as per OpenRM.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
|
|
Add external memory (EMEM) read/write operations to the GPU's FSP falcon
engine. These operations use Falcon PIO (Programmed I/O) to communicate
with the FSP through indirect memory access.
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Eliot Courtney <ecourtney@nvidia.com>
Link: https://patch.msgid.link/20260603-b4-blackwell-v13-1-d9f3a06939e0@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
|
|
When executing the command
"make -C tools/testing/selftests TARGETS=livepatch run_tests",
the following error message was reported.
TEST: livepatch interaction with ftrace_enabled sysctl ... not ok
...
livepatch: sysctlo
: setting key "kernel.ftrace_enabled": Device or resource busy
livepatch: sysctl: setting key "kernel.ftrace_enabled": 设备或资源忙
...
ERROR: livepatch kselftest(s) failed
not ok 5 selftests: livepatch: test-ftrace.sh # exit=1
To fix it, set LC_ALL=C.
Signed-off-by: Qiang Ma <maqianga@uniontech.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Petr Mladek <pmladek@suse.com>
Link: https://patch.msgid.link/20260527095929.1504032-1-maqianga@uniontech.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
With dirty logging enabled, guest writes often fault on an existing 4K
G-stage leaf that was write-protected only for dirty tracking. The slow
path still performs the full fault handling flow and takes mmu_lock for
write, even though the page-table shape does not change.
x86 handles the analogous case in its fast page fault path by atomically
making a writable SPTE writable again when the fault is only a
write-protection fault. Add the same style of fast path for RISC-V. If a
write fault hits an existing 4K leaf in a writable dirty-log memslot,
mark the page dirty and atomically set the PTE writable and dirty under
the read side of mmu_lock.
The dirty bitmap is updated before the PTE becomes writable again. The
PTE D bit is also set so systems that trap on a clear D bit do not fall
back to the slow path for a writable but clean PTE.
Signed-off-by: Jinyu Tang <tjytimi@163.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260517153427.94889-6-tjytimi@163.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
When a fault hits an existing G-stage leaf with the same PFN, KVM only
needs to update the PTE permissions. This path will be used by read-side
fault handling, so it must not overwrite a concurrent PTE update.
Use the cmpxchg helper when relaxing permissions on an existing leaf,
following the same concurrency model used by x86 for atomic SPTE
permission updates. Retry if another CPU changed the PTE first, and use
cpu_relax() while spinning.
Signed-off-by: Jinyu Tang <tjytimi@163.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260517153427.94889-5-tjytimi@163.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Permission-only G-stage PTE updates can run in parallel once they are
moved to the read side of mmu_lock. Plain set_pte() is not enough for
that case because another CPU may update the same PTE first.
x86 handles the same class of SPTE races with cmpxchg-based updates in
its fast page fault and TDP MMU paths. Add a small RISC-V helper for
atomic G-stage PTE updates. The helper reports contention to the caller
and flushes the target range only when the PTE value actually changes.
Signed-off-by: Jinyu Tang <tjytimi@163.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260517153427.94889-4-tjytimi@163.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
RISC-V KVM currently uses a spinlock for mmu_lock. That serializes all
G-stage MMU operations, including permission-only updates that do not
allocate or free page-table pages.
Use KVM's rwlock form of mmu_lock, as x86 and arm64 already do. Keep the
existing map, unmap and teardown paths on the write side. This prepares
RISC-V for read-side handling of G-stage permission updates.
Signed-off-by: Jinyu Tang <tjytimi@163.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260517153427.94889-3-tjytimi@163.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The common KVM invalidation paths call kvm_unmap_gfn_range() with
mmu_lock already held for write.
For the standard MMU notifier path, the call chain is:
kvm_mmu_notifier_invalidate_range_start()
kvm_handle_hva_range()
kvm_unmap_gfn_range()
kvm_mmu_notifier_invalidate_range_start() leaves range.lockless clear.
kvm_handle_hva_range() therefore takes KVM_MMU_LOCK(kvm) before invoking
the handler.
The guest_memfd path has the same locking contract:
__kvm_gmem_invalidate_begin()
kvm_mmu_unmap_gfn_range()
kvm_unmap_gfn_range()
__kvm_gmem_invalidate_begin() explicitly takes KVM_MMU_LOCK(kvm) before
calling kvm_mmu_unmap_gfn_range().
So remove the local trylock and make the common locking contract explicit
with lockdep_assert_held_write() like x86.
Signed-off-by: Jinyu Tang <tjytimi@163.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260517153427.94889-2-tjytimi@163.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
