| Age | Commit message (Collapse) | Author |
|---|
|
Add Shikra compatible consistent with CAMSS CCI interfaces.
It requires only two clocks.
Signed-off-by: Nihal Kumar Gupta <nihal.gupta@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v7.2 (take two)
- Add timer (MTU3) and xSPI FLASH support for the RZ/T2H and RZ/N2H
SoCs and their EVK boards,
- Add PCIe support for the RZ/V2N SoC and the RZ/V2N EVK board,
- Add support for the R-Car M3Le SoC and the Geist development board,
- Specify ethernet PHY reset timings on various R-Car boards,
- Add (more) serial, I2C, DMA, and sound support for the RZ/G3L SoC,
- Add PSCI, Multifunctional Interface (MFIS), and SCMI support for the
R-Car X5H SoC and Ironhide development board,
- Add serial DMA support for the RZ/G2L SoC,
- Add keyboard, I2C, Versa clock, and audio support for the RZ/G3L
SMARC SoM and EVK boards,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v7.2-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (56 commits)
arm64: dts: renesas: r9a08g046l48-smarc: Enable audio
arm64: dts: renesas: rzg3l-smarc-som: Enable Versa clock generator
arm64: dts: renesas: r9a08g046l48-smarc: Enable I2C{2,3} devices
arm64: dts: renesas: r9a08g046l48-smarc: Add gpio keys
arm64: dts: renesas: rzt2h-n2h-evk: Enable xSPI nodes
arm64: dts: renesas: r9a09g087: Add xSPI nodes
arm64: dts: renesas: r9a09g077: Add xSPI nodes
arm64: dts: renesas: rzg3e-smarc-som: Sort GMAC pinmux entries
arm64: dts: renesas: r8a779md: Add support for R-Car M3Le R8A779MD Geist
arm64: dts: renesas: r9a07g044: Add DMA properties to serial nodes
arm64: dts: renesas: r9a07g054: Add max-frequency to SDHI nodes
arm64: dts: renesas: r9a07g044: Add max-frequency to SDHI nodes
arm64: dts: renesas: r9a07g043: Add max-frequency to SDHI nodes
arm64: dts: renesas: r9a08g046: Add rsci{0..3} device nodes
arm64: dts: renesas: ironhide: Enable to use SCMI
arm64: dts: renesas: r8a78000: Add MFIS, MFIS-SCP, and transport nodes
arm64: dts: renesas: ironhide: Describe all reserved memory
arm64: dts: renesas: rzt2h-n2h-evk: Configure eMMC/SDHI pins
arm64: dts: renesas: r8a78000: Fix GIC-720AE View 1 Redistributor description
arm64: dts: renesas: r8a78000: Add PSCI node
...
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/drivers
Renesas driver updates for v7.2 (take two)
- Identify the R-Car M3Le SoC,
- Add Multifunctional Interface (MFIS) support for R-Car V4H and V4M.
* tag 'renesas-drivers-for-v7.2-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
soc: renesas: rcar-mfis: Add R-Car V4H/V4M support
dt-bindings: soc: renesas: mfis: Add R-Car V4H/V4M support
soc: renesas: Identify R-Car R8A779MD M3Le SoC
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Document the bindings for the CDSP, LPAICP and MPSS PAS on
the Shikra SoC.
Signed-off-by: Bibek Kumar Patro <bibek.patro@oss.qualcomm.com>
Signed-off-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260521-shikra-rproc-v3-1-2fca0bbe1ad7@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add compatible for the Qualcomm Shikra RPM processor.
Signed-off-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
Signed-off-by: Sneh Mankad <sneh.mankad@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260508-shikra_mailbox_and_rpm_changes-v3-2-698f8e5fb339@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Document compatible string for the CDSP Peripheral Authentication
Service on the Hawi SoC, which is compatible with the Qualcomm SM8550
SoC except for the one additional interrupt ("shutdown-ack") and
similar to the Qualcomm Kaanapali SoC, "global_sync_mem" is not
managed by the kernel so it remains unlisted.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260427190614.3679937-2-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Document compatible string for the ADSP Peripheral Authentication
Service on the Hawi SoC, which is compatible with the Qualcomm SM8550
ADSP PAS and can fallback to SM8550 except for the one additional
interrupt ("shutdown-ack").
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260427190614.3679937-1-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The property 'input-voltage-microvolt' is a typo. Rename it to
'input-threshold-voltage-microvolt' to align with the standard pin
configuration defined in pincfg-node.yaml and parsed by pinconf-generic.c.
Fixes: f6ea7004e926 ("dt-bindings: pinctrl: realtek: Add RTD1625 pinctrl binding")
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
The driver for MT6795 pinctrl already supports the slew-rate property.
Add its description to the documentation.
Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter/IPVS updates for net-next,
this contains updates to address sashiko reports in IPVS and Netfilter
on possible pre-existing issues. This also includes a series to add
refcount for ct helper and timeout to deal with a corner case scenario
with unconfirmed conntracks flying to nfqueue.
1) Add a conn_max sysctl to IPVS to limit the maximum number of
connections, from Julian Anastasov.
2) Use get_unaligned_be16() to access TCP MSS in nfnetlink_osf,
from Fernando Fernandez Mancera.
3) Use {READ,WRITE}_ONCE to access helper flags from nfnetlink_helper.
Several patches for the synproxy infrastructure, from Fernando
Fernandez Mancera:
4) Drop packet if TCP timestamp adjustment fails.
5) Continue parsing of TCP timestamp to deal with possible duplicates.
6) Use {get,put}_unaligned_be32() to acess the TCP timestamp.
7) Hold ct->lock to initialize nf_ct_seqadj_init().
Updates for the ct timeout infrastructure, to deal with a corner case
for unconfirmed conntracks flying to nfqueue:
8) Add a refcount to track ct timeout policy use by ct extension,
release the timeout until the last ct extension drops the refcnt
on it.
Similar update for the ct helper infrastructure:
9) Dynamic allocation of ct helpers, as a preparation for adding
refcount to track ct extension use.
10) Move destroy_sibling_or_exp() to nf_conntrack_proto_gre, so
pptp conntrack helper module removal does not make this code
unreachable via the helper->destroy callback. This is another
dependency for the new refcount coming in this series.
11) Add a refcount to track use of it from the ct extension, then
ct helper and timeout is reachable to the connection until
it goes away.
12) Remove the genid infrastructure in ct extensions. The primary
goal was to detect that a ct extension such as ct timeout and
ct helper went stale for unconfirmed conntrack, either because
object or module was removed. This deactivates all ct extensions
though for this unconfirmed conntrack.
13) Call nf_ct_gre_keymap_destroy() if this is a master conntrack
with a pptp helper only.
sashiko.dev reports one more relevant issue when unsetting the helper
via ctnetlink that I will address in a follow up patch.
Then, two more assorted updates:
14) Avoid a unlikely underflow in bridge VLAN untag, only possible
if buggy bridge VLAN filtering is buggy, remove WARN_ON_ONCE
while at it. From David Carlier.
15) Use get_unaligned_be32() in nf_conntrack_tcp to access sack
extension, from Rosen Penev.
* tag 'nf-next-26-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_conntrack: use get_unaligned_be32() in tcp_sack()
netfilter: flowtable: avoid num_encaps underflow on bridge VLAN untag
netfilter: conntrack: call nf_ct_gre_keymap_destroy() if master helper is pptp
netfilter: conntrack: revert ct extension genid infrastructure
netfilter: nf_conntrack_helper: add refcounting from datapath
netfilter: nf_conntrack_pptp: move GRE specific cleanup to GRE tracker
netfilter: nf_conntrack_helper: dynamically allocate struct nf_conntrack_helper
netfilter: cttimeout: detach dataplane timeout policy and repurpose refcount
netfilter: synproxy: protect nf_ct_seqadj_init() with conntrack lock
netfilter: synproxy: fix unaligned memory access in timestamp adjustment
netfilter: synproxy: adjust duplicate timestamp options
netfilter: synproxy: drop packets if timestamp adjustment fails
netfilter: nfnetlink_cthelper: use {READ,WRITE}_ONCE for accessing helper flags
netfilter: nfnetlink_osf: fix mss parsing on big-endian architectures
ipvs: add conn_max sysctl to limit connections
====================
Link: https://patch.msgid.link/20260607094954.48892-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pass KBUILD_MODNAME through the driver registration macro so that the
driver core can create the module symlink in sysfs for built-in drivers,
and fixup all callers.
The Rust platform adapter is updated to pass the module name through to
the new parameter.
Tested on qemu with:
- x86 defconfig + CONFIG_RUST
- arm64 defconfig + CONFIG_RUST + CONFIG_CORESIGHT stuff
Examples after this patch:
/sys/bus/platform/drivers/...
coresight-itnoc/module -> coresight_tnoc
coresight-static-tpdm/module -> coresight_tpdm
coresight-catu-platform/module -> coresight_catu
serial8250/module -> 8250
acpi-ged/module -> acpi
vmclock/module -> ptp_vmclock
Co-developed-by: Rahul Bukte <rahul.bukte@sony.com>
Signed-off-by: Rahul Bukte <rahul.bukte@sony.com>
Signed-off-by: Shashank Balaji <shashank.mahadasyam@sony.com>
Link: https://patch.msgid.link/20260518-acpi_mod_name-v5-4-705ccc430885@sony.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Document the UFS Controller on the Hawi Platform.
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Palash Kambar <palash.kambar@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260526090956.2340262-3-palash.kambar@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
This pull request contains the following interconnect updates for
the 7.2-rc1 merge window:
- New driver for Shikra SoC
- New driver for Nord SoC
- New driver for Hawi SoC including CPU/LLCC bwmon support
- Add missing SDCC nodes for Eliza SoC
- Misc cleanups and fixes.
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-7.2-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: qcom: add Hawi interconnect provider driver
dt-bindings: interconnect: qcom: document the RPMh NoC for Hawi SoC
dt-bindings: interconnect: qcom-bwmon: Add Hawi llcc-bwmon compatible
interconnect: qcom: eliza: Add SDCC1 slave node
dt-bindings: interconnect: qcom,eliza-rpmh: Add SDCC1 slave
interconnect: qcom: Restrict drivers per ARM/ARM64
interconnect: qcom: Fix indentation
dt-bindings: interconnect: qcom,sm6115: Restrict children and clocks
dt-bindings: interconnect: qcom,sm6115: Drop incorrect children if:then: block
dt-bindings: interconnect: qcom,sdm660: Disallow clocks when appropriate
interconnect: Move MODULE_DEVICE_TABLE next to the table itself
interconnect: Do not create empty devres on missing interconnects
dt-bindings: interconnect: qcom-bwmon: Add Hawi cpu-bwmon compatible
interconnect: qcom: Add interconnect provider driver for Nord SoC
dt-bindings: interconnect: Document RPMh Network-On-Chip for Qualcomm Nord SoC
interconnect: qcom: add Shikra interconnect provider driver
dt-bindings: interconnect: document the RPM Network-On-Chip interconnect in Shikra SoC
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into work-testing
IIO: New device support, features and cleanup for the 7.2 cycle.
Like many areas of the kernel IIO has seen a lot of new contributors
though in this case that is not all AI driven, but also reflects and annual
surge of student contributions from usp.br. We also have several new
regular reviewers who are helping with the surge (thanks to all our
active reviewers!)
Given there was a lot of cases of similar improvements applied to
different drivers, I have grouped those into a special section (various
drivers) to avoid mass duplication.
New device support
------------------
adi,ad4130
- Add support for AD4129-4, AD4129-8, AD4130-4, AD4131-4 and AD4131-8
after reworking the driver to be suitable for multiple device support.
adi,ad4080
- Support the AD4880 and AD4884 dual-channel parts. Interesting parts
as have two separate data pipelines (including SPI buses interfaces),
but the only current backend IP combines the two so they cannot be
treated as independent devices.
adi,ad5706r
- New driver for this 4 channel current output DAC.
adi,ad4691
- New driver supporting this family of ADCs. Support for AD4691, AD4692,
AD4693 and AD4694 which support either 8 or 16 channels with different
max sampling rates. Feature rich driver including SPI offload support.
adi,ltc2983
- Add support for the ADT7604 in which the same sensor die as the
LTC2984 is used for leak detection (liquid coverage of a sense area).
allwinner,adc
- Support for A523 SoCs. Similar to existing parts but with an additional
clock. Includes adding support for non contiguous channel lookup
for in kernel use (fwnode_xlate callback).
broadcomm,apds9999
- New driver for the APDS9999 Ambient Light, RGB and proximity sensor.
memsic,mmc5983
- New driver for this 3-axis magnetometer.
taos,tsl2772
- Add support for the AVAGO APDS9900 and APDS9901 Ambient Light and
Proximity sensors. which are very similar to existing part with slightly
different integration time choices. Includes removal of driver for these
parts from drivers/misc.
vishay,veml3328
- New driver for this RGB+IR light sensor.
Features
--------
IIO Core
- Support for IEEE 754 floating point values in buffer scan elements.
- Support quaternion axis representation (missing the scaler part)
microchip,mcp4821
- Add configurable gain control
qcom,pm8xxx-xoadc
- Add per channel labels.
st,lsm6dsx
- Support for rotation sensing on the LSM6DSV and LSM6DSV16X using
both floating point and new quaterionaxis rotation modifier.
MAINTAINERS update
------------------
IIO top level entry
- Include Documentation/driver-api/iio/
adi,*
- Top level ADI entry maintainer switch from Lars-Peter Clausen to Nuno Sá
reflecting what has been the reality for some time. Thanks to Lars-Peter
who was very active for many years, but has moved on to other things.
Also add the linux@analog.com email list to ensure we don't get a gap
in future.
- Maintainer updates to reflect Cosmin Tanislav having moved on - thanks
to Marcelo Schmitt for taking these over.
sensiron,scd30
- Replace maintainer (Tomasz Duszynski) with Maxwell Doose.
Cleanups, minor fixes and hardening.
------------------------------------
Documentation
- Add missing powerdown modes to ABI docs.
- Use modern helpers for buffer definition in the examples.
core
- Rework of the handling of timestamps so that the offset is cached at
buffer resize time (during enabling) rather than based on assumption
that relied in the timestamp being last and the largest element and
so always 8 bytes before end of the scan. Underlying problem was
triggered by scans with repeated type elements such as quaternions
with each element more than 2 bytes - Giving a 16 byte+ aligned channel
with result that a following timestamp may be 16 bytes from end of scan,
rather than 8. Note that for the bosch,bno55 a compatibility hack means
that it will duplicate the timestamp putting a second copy at previously
incorrect location.
- Tidy up use of kernel types in buffer code to not use int64_t given all
calls use s64.
various drivers
- Drop unused driver_data in device id tables - includes cleanup of various
drivers that had only one choice where it can be hard coded elsewhere.
- Move to named initializers for many i2c_device_id and platform_device_id
tables (I have no idea how we go into habit of using named initializers
for only a subset of the table types - e.g. of_device_id).
- Make IIO_CHAN_SOFT_TIMESTAMP() macro a compound literal allowing simple
use in various drivers that do dynamic channel definitions. Use it in
all such cases.
- Use dev_err_probe() and local dev variables to tidy up older drivers.
- Switch more drivers to devm_mutex_init() to provide minor debug benefits.
- Reorder code to put MODULE_DEVICE_TABLE() next to the tables.
- Lots of use of cleanup.h magic to improve code flow, often including
related refactors such as introducing helpers.
- Replacement of usleep_range() with fsleep()
- Reduce logging noise where functions either provide their own extensive
reports on error, or where a clear error code is returned to userspace.
- Minor spelling and style fixes (improving bracket usage, not using
__packed etc)
hid-sensors-*
- Drop helpers for setting channel bit masks in favor of a compound
literal at the call site. Also general cleanup of surrounding code.
hid-sensors-magn
- Use u32 rather than bare unsigned for types.
hid-sensors-rotation
- Make sue of ext_scan_type handling for static case rather than duplicate
chan_info structures.
adi,ad3552r
- Use field_get() to replace open coded equivalent.
adi,ad4170
- Switch from switch to table lookup for GPIO modes.
adi,ad5686
- Apply IWYU principal to included a consistent set of headers.
- Deduplicate regmaps for AD5684 and AD5693 as identical.
- Switch from an enum value in driver data and array look up to pointers
to separate structures, improving readabilty and avoiding issues with
0 value when using helpers to deal with different firmware types.
- Add of_match_id table to SPI driver rather than relying on fallback to
spi_device_id table.
- Introduce some helpers for powerdown mask control.
- Add helpers for control sync simplifying a couple of corner cases.
- Docs fixes.
- Add an ops structure to simplify future addition of operations beyond
read and write.
adi,ad7191
- Switch to best practice of using device_property_present() to detect
if an optional property is there rather than error values on querying
the property.
adi,ad7280a
- Use local variables to improve readability of breaking up chan-address.
adi,ad7825
- Cleanup a type mismatch in clamp() call.
adi,ad799x
- Include improvements
- Local dev variable to shorten code lines.
- Cache regulator voltage at probe (these never change in practice)
- Convert to devm for all unwind handling.
adi,ad9832
- Improve include relevance including replacing kernel.h with more specific
headers.
- Simplify some maths.
adi,ad9834
- Improve include relevance including replacing kernel.h with more specific
headers.
adi,adt7316
- Add a comment to avoid future 'fixes' for error handling during the
odd sequence used to flip from I2C mode to SPI mode.
adi,adxl*
- Documentation consistency improvements.
asahi-kasei,ak8975
- Fix missing runtime pm calls for buffered capture.
- Fix missing pm_runtime_put_autosuspend() in an error path that would leave
the device stuck on.
- Close a potential uninitialized kernel stack leak.
- Extensive driver modernization including: header relevance, fsleep()
various minor bugs, dropping duplicate error messages and avoiding
magic lengths for buffers.
- Replace opencoded polling with iopoll().
- Add error checking to gpio reads.
avia,hx711
- Move scale computation from global data to per device avoiding problems
if multiple devices present.
- General binding text cleanup.
bosch,bmg160
- Add missing mount-matrix entry to binding.
bosch,bno55
- Terminate error strings with newlines.
devantech,srf08
- Replace sprintf() with sysfs_emit() and sysfs_emit_at() to make intent
clearer.
freescale,mma8452
- Add missing return value check.
- Fix potential probe ordering issue by switching to non devm irq request.
linear,ltc2309
- Add chip specific read delays.
- Improve chip_info structure, adding __counted_by_ptr marking and
reorganizing to improve packing.
linear,ltc2983
- Fix a firmware combination where default n_wires of 2 bypasses exclusion
of adi,current-rotate whereas explicitly setting it to 2 does not.
- Fix potential race with completion reinit.
- Improve error message wording consistency.
- Use fwnode_property_present() to detect optional properties rather
than fragile return value checking.
microchip,mcp3422
- Use of GENMASK(), FIELD_GET(), FIELD_PREP() to improve readability and
generally modernize driver.
microchip,mcp47feb02
- Fix binding example to use a possible I2C address.
- Fix binding bounds on channel number.
- Standardize binding example indentation
nxp,saradc
- Increase chances of recovering from a failure in the interrupt handler
by notifying the trigger that it can reenable even when the read failed.
- Use field_get() to replace opencoded equivalent.
qualcomm,*
- Standardize on Qualcomm company naming in Kconfig.
richtek,rtq6056
- Add i2c_device_id table for legacy instantiation.
samsung,ssp
- Replace custom timestamp channel macro with main one.
sciosense,ens210
- Now scoped_guard() has been reworked, no need for a return
that can never be reached.
sensiron,scd30
- Constify command lookup table.
- Sanity check for NULL buffer of non zero size being provided to
sc30_i2c_command()
sensortek,stk3310
- Include more appropriate headers.
- Ensure interrupt in appropriate mode after resume.
- Structure definition improvements.
- Use size_of() to replace opencoded sizes.
siliconimage,si1133
- Resolve counter related issues on timeout error paths.
- Unused macro removal, improved macro definitions,.
- Include relevance improvements.
st,lsm6dsx
- Fix an issue with applying invalid data check to wrong type of sample.
taos,tcs3472
- Try to powerdown chip on probe failure.
- Devm usage and dropping of remove() callback.
- Various other minor cleanup.
taos,tsl2591
- Dead code removal.
- Simplify tsl2591_persist functions using a look up table.
ti,ads1298
- Fix wrong comment on timeout (and minor code improvement)
- Drop unnecessary CONFIG2 write during init.
ti,ads7950
- Check ret rather that ret < 0 for spi_setup() call.
- Use fully devm managed resources including moving to
devm_regulator_get_enable_read_voltage() at probe time rather than
querying evey time.
- Using spi_optimize_message() to reduce CPU usage.
ti,ads8688
- User read_avail() callback rather than open coding handling of
available attributes.
ti,opt3001
- Header relevance improvements
- Use GENMASK for field definitions to improve readability.
vishay,vcnl4000
- Switch from enum in device_data to individual names structures
impmroving code readabililty.
- Move to devm handling for remainder of probe.
vishay,veml6030
- Drop pointless read of current Iteration Time index as it is not used.
xilinx,ams
- Fix potential out of bound channel lookup.
- Replace some large switch statements with table lookups.
yamaha,yas530
- Put label in chip info structure to avoid look up in i2c_device_id table.
Drop
----
iio-trig-interrupt.
- Not used for some time and no support for modern firmware bindings or
in kernel users. So drop it.
* tag 'iio-for-7.2a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (266 commits)
iio: adc: nxp-sar-adc: harden buffer ISR against per-channel read failure
iio: chemical: scd30: Replace manual locking with RAII locking
iio: light: tsl2591: remove unneeded tsl2591_compatible_als_persist_cycle()
iio: dac: ad5686: create bus ops struct
iio: dac: ad5686: cleanup doc header of local structs
iio: dac: ad5686: add control_sync() for single-channel devices
iio: dac: ad5686: add helpers to handle powerdown masks
iio: dac: ad5686: add of_match table to the spi driver
iio: dac: ad5686: drop enum id
iio: dac: ad5686: remove redundant register definition
iio: dac: ad5686: refactor include headers
iio: adc: ad4080: fix AD4880 chip ID
iio: light: veml3328: add support for new device
dt-bindings: iio: light: veml6030: add veml3328
docs: iio: adc: ad4691: add driver documentation
iio: adc: ad4691: add oversampling support
iio: adc: ad4691: add SPI offload support
iio: adc: ad4691: add triggered buffer support
iio: adc: ad4691: add initial driver for AD4691 family
dt-bindings: iio: adc: add AD4691 family
...
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into char-misc-next
Xu writes:
FPGA Manager changes for 7.2-rc1
- Wentao fixes use-after-free issue in of-fpga-region
- Phil adds the of matching for Altera ts73xx fpga driver
- Ian adds Efinix FPGA SPI programming driver
- Andy fixes several minor issues for Lattice FPGA driver
- Manish converts dt-bindings to YAML schema for several Altera devices
- Sebastian fixes several minor issues for Intel DFL & Microchip FPGAs
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
* tag 'fpga-for-7.2-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga:
fpga: microchip-spi: fix zero header_size OOB read in mpf_ops_parse_header()
fpga: dfl-afu: validate DMA mapping length in afu_dma_map_region()
fpga: dfl: add bounds check in dfh_get_param_size()
dt-bindings: fpga: altr,socfpga-fpga-mgr: convert to DT schema
dt-bindings: fpga: altr,a10-pr-ip: convert to DT schema
fpga: lattice-sysconfig-spi: simplify with spi_get_device_match_data()
fpga: lattice-sysconfig-spi: Don't use "proxy" headers
fpga: lattice-sysconfig-spi: Drop of_match_ptr() protection
fpga: lattice-sysconfig-spi: Fix the terminator entries in ID tables
fpga-mgr: Add Efinix SPI programming driver
dt-bindings: fpga: Add Efinix SPI programming bindings
dt-bindings: vendor-prefix: Add prefix for Efinix, Inc.
fpga: ts73xx-fpga: add OF match table for device tree probing
dt-bindings: fpga: Add Technologic Systems TS-7300 FPGA Manager
fpga: region: fix use-after-free in child_regions_with_firmware()
|
|
Document the watchdog device found on the Qualcomm IPQ5210 SoC.
Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260511-ipq5210_wdt_binding-v1-1-859003d48274@oss.qualcomm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
devm_watchdog_register_device() is not documented. Add it to the current
kernel API documentation.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Link: https://patch.msgid.link/20260602100532.6463-1-baojun.xu@ti.com
|
|
The TAS2573 belongs to the TAS257x device family, featuring an integrated
DSP and IV sensing capability.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260602100532.6463-1-baojun.xu@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> says:
SuperH ecovec24/7724se are the last user of Simple Audio Card as
"platform data style". It is mainly supporting "DT style" in these days.
Now, Simple Audio Card "platform data style" is no longer correctly working
during almost this 10 years. but we have not get such report.
Let's remove Sound support from SuperH ecovec24/7724se, and remove
Simple Audio Card platform data style.
Link: https://patch.msgid.link/87zf1le4fu.wl-kuninori.morimoto.gx@renesas.com
|
|
Chancel Liu <chancel.liu@nxp.com> says:
This series adds two features to the i.MX RPMSG ASoC card:
1. Headphone jack detection via GPIO: Introduce the "hp-det-gpios"
device tree property and use simple_util_init_jack() to
register a headphone jack with GPIO-based insertion detection.
2. driver_name assignment: Set driver_name on the snd_soc_card to
"imx-audio-rpmsg", enabling userspace tools such as UCM to reliably
identify the card by driver name regardless of the board-specific
card name.
Link: https://patch.msgid.link/20260528020725.2265321-1-chancel.liu@nxp.com
|
|
Sound cards using the i.MX RPMSG audio interface may connect a
headphone jack with GPIO-based insertion detection. Add the
"hp-det-gpios" property to the fsl,rpmsg binding to support this
configuration.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://patch.msgid.link/20260528020725.2265321-2-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add kernel-doc documentation describing the Intel DP link training
recovery state machine and the sequence of automatic retraining,
fallback selection, and userspace notification.
v2:
- Rebase on dedicated intel-display documentation change.
- Remove unnecessary indent in section bodies. (Jani)
- Add recovery flowcharts. (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260601093836.3057345-23-imre.deak@intel.com
|
|
Modify cpufreq_policy_init_qos() introduced previously to use
policy->min/max set in the driver .init() callback as the initial
values for the policy min/max frequency QoS requests, respectively,
so long as they are different from 0 (which means that they have
been updated by the driver). Update the documentation in accordance
with that code change.
This only affects the following drivers:
- gx-suspmod (min)
- cppc-cpufreq (min)
- longrun (min/max)
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
[ rjw: Changelog rewrite ]
Link: https://patch.msgid.link/20260528090913.2759118-5-pierre.gondois@arm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
KVM has reflected KVM_X86_SNP_VM to userspace since 1dfe571c12cf
("KVM: SEV: Add initial SEV-SNP support"), and KVM_X86_TDX_VM since
161d34609f9b ("KVM: TDX: Make TDX VM type supported"). Update the
documentation to reflect this fact.
Fixes: 1dfe571c12cf ("KVM: SEV: Add initial SEV-SNP support")
Fixes: 161d34609f9b ("KVM: TDX: Make TDX VM type supported")
Signed-off-by: Carlos López <clopez@suse.de>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Link: https://patch.msgid.link/20260603114504.814647-2-clopez@suse.de
[sean: use one tab instead of two]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add the documentation of exporting and deleting IMA measurements in
Documentation/security/IMA-export-delete.rst.
Also add the missing Documentation/security/IMA-templates.rst file in
MAINTAINERS.
Link: https://github.com/linux-integrity/linux/issues/1
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
During staging and delete, measurements are not completely deallocated.
Their entry digest portion is kept and is still reachable with the hash
table to detect duplicate records. If the number of records is significant,
this reduces the memory saving benefit of staging.
Some users might be interested in achieving the best memory saving (the
measurements are completely deallocated) at the cost of having duplicate
records across the staged measurement lists. Duplicate records are still
avoided within the current measurement list.
Introduce the new kernel option ima_flush_htable to decide whether or not
the digests of staged measurement records are flushed from the hash table,
when they are deleted, to achieve the maximum memory saving.
When the option is enabled, replace the old hash table with a new one,
by calling ima_alloc_replace_htable(), and completely delete the
measurements records.
Note: This code derives from the Alt-IMA Huawei project, whose license is
GPL-2.0 OR MIT.
Link: https://github.com/linux-integrity/linux/issues/1
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Now that inode->i_ino stores the full 64-bit NFS fileid, the
nfs_compat_user_ino64() function is no longer needed.
generic_fillattr() already copies inode->i_ino into stat->ino, so the
explicit override in nfs_getattr() is also redundant.
Also remove the now-unused nfs_fileid_to_ino_t() and
nfs_fattr_to_ino_t() helper functions that were used to XOR-fold
64-bit fileids into the old unsigned long i_ino.
Keep the enable_ino64 module parameter as a deprecated stub that
accepts but ignores the value, logging a notice when set. This avoids
breaking existing configurations that pass nfs.enable_ino64 on the
kernel command line or in modprobe.d.
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@hammerspace.com>
|
|
The conservative governor documentation incorrectly states that setting
freq_step to 0 will use the default 5% frequency step. In reality, since
at least commit 8e677ce83bf4 ("[CPUFREQ] conservative: fixup governor to
function more like ondemand logic"), freq_step=0 has always caused the
governor to skip frequency updates entirely.
Correct the documentation to reflect the actual behavior: freq_step=0
disables frequency changes by the governor entirely.
Fixes: 2a0e49279850 ("cpufreq: User/admin documentation update and consolidation")
Signed-off-by: Pengjie Zhang <zhangpengjie2@huawei.com>
Reviewed-by: Zhongqiu Han <zhongqiu.han@oss.qualcomm.com>
[ rjw: Subject adjustment ]
Link: https://patch.msgid.link/20260603055635.1549943-1-zhangpengjie2@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Convert the xtfpga I2S controller plain-text binding documentation
to standard dt-schema.
The hardware requires exactly one memory region, one interrupt line,
and one phandle to the master clock. Verified these constraints against
the driver source in sound/soc/xtensa/xtfpga-i2s.c.
Also explicitly define the '#sound-dai-cells' property, as it is
required for audio routing but was omitted from the original
text properties list.
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chaitanya Sabnis <chaitanya.msabnis@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260421085635.4490-1-chaitanya.msabnis@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull CPUFreq Arm updates for 7.2 from Viresh Kumar:
"- Add cpufreq scaling support for Qualcomm Shikra SoC (Taniya Das, and
Imran Shaik).
- Minor fixes for cpufreq drivers (Krzysztof Kozlowski, Akashdeep Kaur,
Hans Zhang, Guangshuo Li, and Xueqin Luo)."
* tag 'cpufreq-arm-updates-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: ti: Add EPROBE_DEFER for K3 SoCs
cpufreq: qcom: Add cpufreq scaling support for Qualcomm Shikra SoC
dt-bindings: cpufreq: Document Qualcomm Shikra SoC EPSS
cpufreq: cppc: mask Desired_Excursion when autonomous selection is enabled
cpufreq: qcom-cpufreq-hw: Fix possible double free
cpufreq: apple-soc: Use FIELD_MODIFY()
cpufreq/amd-pstate: Use FIELD_MODIFY()
cpufreq: qcom: Unify user-visible "Qualcomm" name
|
|
The Qualcomm Shikra cpufreq hardware is functionally identical to EPSS,
but supports only up to 12 frequency lookup table (LUT) entries. Introduce
Shikra specific bindings to represent this constrained EPSS variant.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
This is used by things like Jenkins and other CI systems, which can
pretty-print the test output and potentially provide test-level comparisons
between runs.
The implementation here is pretty basic: it only provides the raw results,
split into tests and test suites, and doesn't provide any overall metadata.
However, CI systems like Jenkins can ingest it and it is already useful.
Link: https://lore.kernel.org/r/20260606013827.240790-2-david@davidgow.net
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: David Gow <david@davidgow.net>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Reflect the rqspinlock conversion and orphan-recovery paths added in
the previous commit:
- All LRU locks are rqspinlock_t; any acquire can fail (AA or
timeout). A shared "rqspinlock acquire failed" terminal collapses
to the existing -ENOMEM exit. Dashed arrows from each acquire site
mark the failure paths.
- The per-CPU local freelist is now lockless (free_llist).
- Post-steal: re-acquiring loc_l->lock to insert the stolen node
into the local pending list can fail; on failure the node is
published to free_llist instead of being orphaned, and the call
returns -ENOMEM.
- Steal-loop victim lock failure is silent: skip the victim and try
the next CPU.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260607-lru_map_spin-v3-2-bcd9332e911b@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Now that the Rust KUnit tests are protected with Kconfig, update the
documentation to mention it.
Signed-off-by: Yury Norov <ynorov@nvidia.com>
Reviewed-by: David Gow <david@davidgow.net>
Acked-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260417031531.315281-4-ynorov@nvidia.com
[ Fixed the paragraph by moving the new sentence above. Added gate
in the other example as well. Applied proper formatting. Reworded
slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The "memfd Live Update ABI" section in include/linux/kho/abi/memfd.h
currently does not render in the exported documentation. This is because
it should not include the "DOC:" in its reference. Drop it to ensure
correct rendering. Tested by running make htmldocs.
Fixes: 15fc11bb2cb6 ("docs: add documentation for memfd preservation via LUO")
Signed-off-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260605160645.3650271-1-pratyush@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
|
|
Document an interconnect path for camcc which needs to be enabled so
that the CAMSS_TOP_GDSC power domain can turn on successfully.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260501-milos-camcc-icc-v2-2-bb83c1256cc3@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add X1P42100 camera clock controller support and clock bindings
for camera QDSS debug clocks which are applicable for both X1E80100
and X1P42100 platforms.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260507-purwa-videocc-camcc-v5-2-fc3af4130282@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add device tree bindings for the video clock controller on Qualcomm
X1P42100 (Purwa) SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260507-purwa-videocc-camcc-v5-1-fc3af4130282@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The CONFIG_PROPELLER_CLANG option currently depends on
ARCH_SUPPORTS_PROPELLER_CLANG, but this dependency seems unnecessary.
Remove ARCH_SUPPORTS_PROPELLER_CLANG and allow users to control
Propeller builds solely through CONFIG_PROPELLER_CLANG. This simplifies
the kconfig and avoids potential confusion.
Move the .llvm_bb_addr_map sections grouping to
include/asm-generic/vmlinux.lds.h.
The Propeller documentation has been updated to reflect the most
recent tool location and now includes instructions for arm64.
Contributor Acknowledgments:
* SPE instructions: Daniel Hoekwater <hoekwater@google.com>
Signed-off-by: Rong Xu <xur@google.com>
Suggested-by: Will Deacon <will@kernel.org>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Yabin Cui <yabinc@google.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20260604195612.3757860-3-xur@google.com
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
|
|
The CONFIG_AUTOFDO_CLANG option currently depends on
ARCH_SUPPORTS_AUTOFDO_CLANG, but this dependency seems unnecessary.
Remove ARCH_SUPPORTS_AUTOFDO_CLANG and allow users to control AutoFDO
builds solely through CONFIG_AUTOFDO_CLANG. This simplifies the kconfig
and avoids potential confusion.
Expand the AutoFDO documentation to include instructions for arm64.
Contributor acknowledgments:
* SPE instructions: Daniel Hoekwater <hoekwater@google.com>
* ETM instructions: Yabin Cui <yabinc@google.com>
Signed-off-by: Rong Xu <xur@google.com>
Suggested-by: Will Deacon <will@kernel.org>
Tested-by: Yabin Cui <yabinc@google.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20260604195612.3757860-2-xur@google.com
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
|
|
EN7581 and AN7583 SoCs support connecting multiple external SerDes to GDM3
or GDM4 ports via a hw arbiter that manages the traffic in a TDM manner.
As a result multiple net_devices can connect to the same GDM{3,4} port
and there is a theoretical "1:n" relation between GDM ports and
net_devices.
Introduce the ethernet node child of a specific GDM port in order to model
a given net_device that is connected via the external arbiter to the
GDM{3,4} port. This new ethernet node is defined by the "airoha,eth-port"
compatible string. Please note GDM1 and GDM2 does not support the
connection with the external arbiter and they are represented by an
ethernet node defined by the "airoha,eth-mac" compatible string.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260603-airoha-eth-multi-serdes-v9-1-5d476bc2f426@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
NETDEV_CMD_BIND_RX is currently GENL_ADMIN_PERM, which checks
CAP_NET_ADMIN against init userns. With recent container/netkit/ns
support for devmem, other userns/netns use cases come online and require
bind-rx to allow CAP_NET_ADMIN in non-init user ns as well.
Switch the flag to GENL_UNS_ADMIN_PERM to allow bind-rx for
CAP_NET_ADMIN in the netns's owning userns as well.
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260602-nl-prov-v2-1-ad721142c641@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Document the Samsung SOFEF01-M Display-Driver-IC and 1080x2520@60Hz
command-mode DSI panels found in many Sony phones:
- Sony Xperia 5 (kumano bahamut): amb609tc01
- Sony Xperia 10 II (seine pdx201): ams597ut01
- Sony Xperia 10 III (lena pdx213): ams597ut04
- Sony Xperia 10 IV (murray pdx225): ams597ut05
- Sony Xperia 10 V (zambezi pdx235): ams605dk01
- Sony Xperia 10 VI (columbia pdx246): ams605dk01
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://patch.msgid.link/20251222-drm-panels-sony-v2-4-82a87465d163@somainline.org
[robh: move vci-supply property to top-level]
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Recent changes introduced TDX module update support. This is a thorny
feature to use correctly. It is intended for informed admins only who are
expected to either be doing things very carefully, or using it via
userspace programs that handle the pitfalls for them.
Document the basics of how to use the feature and what is expected of the
user in order for it to go correctly. Both to help the intended users of
the feature and as a "here be dragons" note for the more casual TDX users.
[ dhansen: tweak docs a bit, clarify update constraints ]
Signed-off-by: Chao Gao <chao.gao@intel.com>
[dropped "Implementation details" section, update log]
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
|
|
Convert the TI OMAP Dynamic Memory Manager (DMM) dt binding
from text format to DT schema.
During conversion following changes were made:
- Move file from /bindings/arm/omap to /bindings/soc/ti/
- Make the 'ti,hwmods' property optional and mark it deprecated as it is
no longer used, it is kept to support legacy dtbs.
- Add the missing required property 'interrupts' to example node.
Signed-off-by: Bhargav Joshi <j.bhargav.u@gmail.com>
Link: https://patch.msgid.link/20260605-ti-omap-dmm-v2-1-1b460742ec83@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Add DT compatible strings for the Aquila i.MX95 SoM and its supported
carrier boards: the Aquila Development Board and the Clover carrier
board.
Link: https://www.toradex.com/computer-on-modules/aquila-arm-family/nxp-imx95
Link: https://www.toradex.com/products/carrier-board/aquila-development-board-kit
Link: https://www.toradex.com/products/carrier-board/clover
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Franz Schnyder <franz.schnyder@toradex.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Add the i.MX95 19x19 FRDM PRO board in the binding document.
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Joseph Guo <qijian.guo@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Add binding for the SolidRun i.MX8DXL based System on Module, and the
reference HummingBoard Telematics.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
