| Age | Commit message (Collapse) | Author |
|---|
|
Add KUnit tests to verify RSSI adjustment for 6 GHz duplicated
beacons across different operational bandwidths and validate
detection of the duplicated beacon bit.
Signed-off-by: Avinash Bhatt <avinash.bhatt@intel.com>
Link: https://patch.msgid.link/20260527230313.a3500c44f5e8.Icba6ee1158e9f563a91b482b8cdd3f51ddace468@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Clearly, from a user perspective, it must be valid to configure
WoWLAN and then suspend while not connected to a network. Since
mac80211 doesn't distinguish these cases and simply calls the
driver to suspend whenever WoWLAN is configured, the driver has
to cleanly handle the case where it's called for WoWLAN, it's
not connected but there's also no netdetect configured.
Remove the WARN_ON() and keep returning 1 to disconnect and
then suspend.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20260527230313.19720967372b.Iff30814510a26f9f609f98eeea3111c50c1afb31@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
the per-rf file"
IWL_BZ_UCODE_CORE_MAX is undefined in cfg/rf-fm.c, this
causes __stringify(core) to turn it into the literal
token text, so MODULE_FIRMWARE entries are generated as
"iwlwifi...-cIWL_BZ_UCODE_CORE_MAX.ucode",
instead of the actual number.
This reverts the commit below.
Signed-off-by: Shahar Tzarfati <shahar.tzarfati@intel.com>
Link: https://patch.msgid.link/20260527230313.a10bc3359dca.I446a1340c635f07aff3efaba5317635e010c156f@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
While associated to MLD AP with active EMLSR, set all scan
operations as fast-balance scans. The only exception is when a
fragmented scan is planned (high traffic or low latency), in
which case the fragmented scan is preserved.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Link: https://patch.msgid.link/20260527230313.32d278842b0e.Ia3d73e4085eefc4d3921e93de4107b2d6a6f922e@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Add a new FW TLV (IWL_UCODE_TLV_FW_NAN_MAX_CHAN_SWITCH_TIME) that
allows the firmware to specify the NAN maximum channel switch time
in microseconds.
When the TLV is present, use its value for the NAN device capability.
Otherwise, fall back to the default of 4 milliseconds.
Signed-off-by: Israel Kozitz <israel.kozitz@intel.com>
Link: https://patch.msgid.link/20260527230313.e8ae1a3adacd.I15b933407ca3974a65047b63b4f9b00bed3520fb@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
The mimo field of the sta command is badly named. It really carries the
initial SMPS value as it is in the association request of the client
station (when we are the AP).
In NAN we don't have this information, just mark SMPS as disabled.
Link: https://patch.msgid.link/20260527230313.abd136be474e.I9eb663d953b482236345ffbcb611f28facea83c1@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
It's only needed by mvm, so there's no need to have it in
iwlwifi and export it, just move it to mvm itself.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20260527230313.87769f13c7d7.I3875d768694b9484317a3253f479a2a2100244f4@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Given that we now use v3 rates with FW index throughout,
_to_hwrate() is confusing, since the hardware still uses
the PLCP value, the driver just doesn't see that now (as
it talks to firmware, not hardware.)
Rename this to iwl_mvm_rate_idx_to_fw_idx() to more
clearly indicate what it's doing.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20260527230313.a60c8aea5b6c.I6af48d5d9748e184eed9d3437d312291cab61d7f@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
The CNVI_PMU_STEP_FLOW register address differs between device families.
For SC and newer devices, the register is at 0xA2D688,
while for BZ devices it's at 0xA2D588.
Signed-off-by: Moriya Itzchaki <moriya.itzchaki@intel.com>
Link: https://patch.msgid.link/20260527230313.f0c115c4f74e.I3c66b2e39a97f754e853ac7e7dba8e433523619e@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
We dereference the mld_sta pointer before checking for NULL.
But we do check the sta pointer, and sta != NULL means mld_sta != NULL,
so there is no real issue.
Fix it anyway to silence the warning.
Link: https://patch.msgid.link/20260527200512.506707-2-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
This command is sent in other opmodes as well. Remove the mvm prefix.
Link: https://patch.msgid.link/20260527230313.290e4d9db14a.Ia4edc64dacc8e298ab7817ab5c37843e92698b8d@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
iwl_pcie_set_hw_ready still returns the return value of iwl_poll_bits,
but the latter one no longer returns the time elapsed until success, now it
returns either success or failure.
Remove the comment entirely.
Link: https://patch.msgid.link/20260527230313.ae42da7924ec.I1a92266621dc0033afa80f022d4c45e91674fedb@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Currently, the dump code attempts to dump any number of
memories and register banks, as defined by the firmware.
Especially when the device is failing, this can lead to
excessive time spent attempting to acquire NIC access
over and over again.
Improve the code to only attempt to acquire NIC access
once or twice, but using the new memory dump functions
that may drop the spinlock etc. Mark all dump regions
that require NIC access, and skip them if we couldn't
obtain that.
In order to avoid CPU latency due to the increased time
holding the spinlock (and possibly disabling softirqs),
drop locks and call cond_resched() after each section
(if holding NIC access) but don't release HW NIC access.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20260527230313.bec886142cc8.I41f2eaf2403b38147504d5dab0a7414de2699adc@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
AX231 is a device that is based on AX211 that doesn't support 6E and
its bandwidth is limited to 80 MHz.
Just reuse the radio config from AX203 which has the exact same
characteristics.
It has a specific subdevice ID to allow the driver to differentiate
between AX211 and AX231.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20260512082114.0685ed313987.Ibcfa24e196ac778405d2843f0984b66ca167704e@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Ping-Ke Shih says:
==================
rtw-next patches for -next
Pull-request includes many random fixes and new features.
Major changes are listed below:
rtl8xxxu:
* declare supported channel width by firmware report
rtw88:
* validate RX descriptor to avoid malformed data causing warnings
rtw89:
* support USB devices RTL8922AU
* add sysfs entry to show SN and UUID for specific USB devices
* support to switch USB 3.0 mode for higher performance
* add more fields (mainly SIG-A/SIG-B) to radiotap in monitor mode
* offload packed IO to firmware to reduce IO time (for USB devices)
* add debugfs to diagnose BB healthy
* more preparations for RTL8922DE
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Claim DBE capability in UHR MAC capabilities, hostapd will
have to sort out the actual DBE capabilities based on the
EHT capabilities.
Link: https://patch.msgid.link/20260529102644.4db84674e8c2.I8731be8ea589c94ece5623e7e716cbbc03f50466@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There are new capabilities in D1.4, and some reserved
bits. Update the code accordingly.
Link: https://patch.msgid.link/20260529102644.f146932b21e2.I12bad84157bf809fbe285b79420143b3c456d9d2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
qtnf_pcie_topaz_probe() currently calls devm_request_irq() and only then
disable_irq(). request_irq() installs the action in the irq core
immediately, so qtnf_pcie_topaz_interrupt() can run before the Topaz
private IRQ consumers are initialized, if the hardware misbehaves.
This window is reachable on a running system as soon as probe has
successfully registered pdev->irq but before qtnf_pcie_init_shm_ipc()
sets shm_ipc_ep_in/out.irq_handler. If an interrupt is delivered in
this interval, qtnf_pcie_topaz_interrupt() calls
qtnf_shm_ipc_irq_handler() for shm_ipc_ep_in/out while their irq_handler
callbacks are still unset, so the driver can observe an early IRQ
before its IPC consumer state is ready.
The issue was found on Linux v6.18.21 by our static analysis tool while
scanning request_irq()/disable_irq() registration-order bugs in
wireless PCIe drivers, and then manually reviewed.
Request the IRQ with IRQF_NO_AUTOEN instead and keep the existing
enable_irq() in qtnf_post_init_ep() as the point where interrupts
become visible. This closes the early-IRQ window while preserving the
intended bring-up order.
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Link: https://patch.msgid.link/20260531145435.701703-1-runyu.xiao@seu.edu.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Remove WIPHY_FLAG_SUPPORTS_5_10_MHZ and 5/10 MHz channel
width support. We contemplated this back in early 2023
and didn't do it yet, but nobody stepped up to maintain
it.
It's already _mostly_ dead code since it can really only
be used for AP and maybe IBSS and monitor, but not on a
client since there's no way to scan (and hasn't been in
a very long time, if ever), so the only thing that ever
could really happen with it was run syzbot and trip over
assumptions in the code.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20260529084502.080c5885f0b7.I77cc94485b523c3c006005b9233db13cd4e077b3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
wifi: iwlwifi: fixes - 2026-05-31
Miri Korenblit says:
====================
This contains a few fixes:
- Don't grab nic access in non-fast-resume
- Don't send a large hcmd than transport supports
- In AP mode, don't send tx power constraints command before activating
the link
- Don't do sw reset handshake on older firmwares.
====================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Expose the device's Serial Number (SN) and UUID from EFUSE via two
read-only sysfs attributes, `serial_number` and `uuid`, on the ieee80211
phy device under the `rtw89_usb` attribute group.
This hardware identification information is essential for user-space
applications to uniquely identify, track, and manage specific Wi-Fi
adapters. For example, in automated factory provisioning or device
management systems, user-space tools rely on the EFUSE serial number and
UUID to bind configurations to specific physical adapters. Currently,
standard wireless APIs do not expose this low-level hardware
information, making these sysfs nodes the only viable solution for
user space to extract this data.
The attributes are gated behind a new RTW89_QUIRK_HW_INFO_SYSFS quirk,
enabled only for the VID 0x28de / PID 0x2432 device via the
dev_id_quirks field in rtw89_driver_info.
Example usage from user-space:
$ cat /sys/class/ieee80211/phy0/rtw89_usb/serial_number
3642000123
$ cat /sys/class/ieee80211/phy0/rtw89_usb/uuid
aaec2b7c-0a55-4727-8de0-b30febccbbaa
Cc: Elliot Saba <sabae@valvesoftware.com>
Cc: Charles Lohr <charlesl@valvesoftware.com>
Signed-off-by: Johnson Tsai <wenjie.tsai@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260529075032.16807-3-pkshih@realtek.com
|
|
Add a dev_id_quirks field to rtw89_driver_info so that per-device
(VID/PID) quirks can be expressed independently of chip-level
default_quirks. Apply the bitmap in rtw89_alloc_ieee80211_hw() so
both USB and PCI probes benefit automatically.
All existing driver_info structs initialize dev_id_quirks to 0;
no behavior change.
Signed-off-by: Johnson Tsai <wenjie.tsai@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260529075032.16807-2-pkshih@realtek.com
|
|
Skip the ACPI capability check for all USB devices by default,
allowing them to use their default configurations.
For USB dongles, customers will manage their own compliance and
certification. This initial patch focuses on the generic USB skip
infrastructure; specific customer certifications and localized
configurations will be handled by quirks afterward.
Signed-off-by: David Lee <sc.lee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260525082636.31105-1-pkshih@realtek.com
|
|
Add the specific USB device ID which adapter tested fully functional on
Fedora 44 with kernel 7.0.8-200.fc44.x86_64 and linux-firmware
20260410-1.fc44.
Reported-by: Guillermo Servera Negre <guillem@gservera.com>
Tested-by: Guillermo Servera Negre <guillem@gservera.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260525011728.6836-1-pkshih@realtek.com
|
|
Calling hrtimer_start() on an already-active txtimer is unnecessary
and expensive. Skip the restart if the timer is already active by
adding an hrtimer_active() check before hrtimer_start().
Previously, each packet reset the timer to tx_coal_timer in the future,
acting as a sliding window that delayed NAPI under burst traffic. With
this change, an already-active timer is left to fire sooner, scheduling
NAPI within tx_coal_timer of the first packet and freeing TX descriptors
earlier.
There is no race concern: hrtimer_start() is internally serialized and
safe to call on an active timer. In the event of a race between
hrtimer_active() and hrtimer_start(), the worst case is calling
hrtimer_start() on an already-active timer, which is identical to the
pre-patch behaviour.
Performance on Cyclone V with dwmac-socfpga (iperf3 -u -b 0 -l 64):
Before: ~45200 pps
After: ~52300 pps (~15% improvement)
Additionally, ~10% improvement in UDP throughput observed on Agilex5,
with hrtimer CPU usage reduced from ~8% to ~0.6%.
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Nazim Amirul <muhammad.nazim.amirul.nazle.asmade@altera.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260529064659.32287-1-muhammad.nazim.amirul.nazle.asmade@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All the NAPI instances for a DPSW device are attached to the first
switch port's net_device but shared by all ports. The NAPI instances get
disabled only once the last port goes down.
This causes an issue on the .remove() path where each port is
unregistered and freed one at a time, causing the NAPI instances to be
deleted even though they are not disabled.
In order to avoid this, split up the unregister_netdev() calls from the
free_netdev() so that we make sure all ports go down before we attempt
a deletion of NAPI instances. Also, make the netif_napi_del() explicit
as it is on the .probe() path.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://patch.msgid.link/20260528173452.1953102-6-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The switchdev core notifies the driver on VLAN flag changes on existing
VIDs through the changed field of the switchdev_obj_port_vlan structure.
Without this patch, the driver was erroring out from the start if the
same VID was inserted twice, from its perspective, even though the
second call was actually a flag change.
$ bridge vlan add dev eth2 vid 30 untagged
$ bridge vlan add dev eth2 vid 30
[ 458.589534] fsl_dpaa2_switch dpsw.0 eth2: VLAN 30 already configured
This patch fixes the above behavior by, first of all, removing the
checks and return of errors on a VLAN already being installed. The patch
also moves the sequence of code which checks if there is space for a new
VLAN so that the verification is being done only for VLANs not know by
the switch and not flag changes.
A new parameter is added to the dpaa2_switch_port_add_vlan() function so
that we pass the vlan->changed necessary information. Based on this new
parameter and the flags value, the untagged flag will be added or
removed from a VLAN installed on a port. The same thing is also extended
to the PVID configuration.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://patch.msgid.link/20260528173452.1953102-5-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The check for the maximum number of VLANs is exactly duplicated twice in
the dpaa2_switch_port_vlans_add() function. Remove one of the instances
so that we do not have dead code.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://patch.msgid.link/20260528173452.1953102-4-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In case of an error in dpaa2_switch_rx(), the dpaa2_switch_free_fd()
function is called in order to free the FD. This is incorrect since the
dpaa2_switch_free_fd() is intended to be used on Tx frame descriptors,
meaning that it expects in the software annotation area of the FD data
to find a valid skb pointer on which to call dev_kfree_skb().
Fix this by extracting the dma_unmap_page() from
dpaa2_switch_build_linear_skb() directly into the dpaa2_switch_rx()
function. This allows us to directly use free_pages() in case of an
error before an SKB was created and kfree_skb() afterwards.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://patch.msgid.link/20260528173452.1953102-3-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On bridge leave, the dpaa2_switch_port_set_fdb() function always
allocates a new FDB for the port which is becoming standalone. In case
no FDB is found, then the port leaving a bridge will continue to use the
current one.
The above logic does not cover the case in which there are multiple
bridges which have ports from the same DPSW instance. In this case, when
the last port leaves bridge #1, it finds an unused FDB to switch to, but
the old FDB is not marked as unused. Since the number of FDBs is equal
to the number of DPSW interfaces, this will eventually lead to multiple
ports sharing the same FDB.
Fix this by changing how we are managing the FDBs on the leave path.
Instead of directly allocating a new FDB, first verify if the current
port is the last one to leave a bridge. If this is the case, then
continue to use the current FDB and only allocate another FDB if there
are other ports remaining in the bridge.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://patch.msgid.link/20260528173452.1953102-2-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dsa_port_from_netdev() may return a valid port from a different switch
chip. Programming another chip's port index into the local hardware
causes redirection to the wrong port, or an out-of-bounds access if the
index exceeds the local chip's port count.
Apply a minimal fix that adds a check to catch this case and adjusts the
extack message. When cls->common.skip_sw is not set, the operation could
instead redirect to the upstream port and let the software or upstream
switch(es) handle the forward, but that is not addressed here.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20260530003940.2000994-1-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the missing @may_sleep parameter description to the
mpc52xx_fec_stop kernel-doc comment.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20260531000042.369043-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In fec_resume(), fec_enet_clk_enable() is called before
pinctrl_pm_select_default_state() in the non-WoL path, inverting the
ordering used in fec_suspend() which correctly switches to the sleep
pinctrl state before disabling clocks.
For PHYs with the PHY_RST_AFTER_CLK_EN flag (e.g. TI DP83848 or
SMSC LAN87xx), fec_enet_clk_enable() triggers a hardware reset pulse
via the phy-reset GPIO. With the GPIO pin still in sleep pinctrl state
at that point, the GPIO write has no physical effect and the PHY never
receives the required reset after clock enable, leading to unreliable
link establishment after system resume.
Fix by restoring the default pinctrl state before enabling clocks,
making resume the proper mirror of suspend. The call is made
unconditionally: fec_suspend() only switches to the sleep pinctrl state
on the non-WoL path and leaves the pins in the default state when WoL
is enabled, so on a WoL resume the device is already in the default
state and pinctrl_pm_select_default_state() is a no-op.
Fixes: de40ed31b3c5 ("net: fec: add Wake-on-LAN support")
Signed-off-by: Tapio Reijonen <tapio.reijonen@vaisala.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260529-b4-fec-resume-pinctrl-order-v3-1-6eda0f592fca@vaisala.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mlx5e_skb_from_cqe_mpwrq_nonlinear() copies MLX5E_RX_MAX_HEAD (256)
bytes from the page-pool to the skb's linear part. Those 256 bytes
include part of the payload.
When attempting to do GRO in skb_gro_receive, if headlen > data_offset
(and skb->head_frag is not set), we end up aggregating packets in the
frag_list.
This is of course not good when we are CPU-limited. Also causes a worse
skb->len/truesize ratio,...
So, let's avoid copying parts of the payload to the linear part. We use
eth_get_headlen() to parse the headers and compute the length of the
protocol headers, which will be used to copy the relevant bits of the
skb's linear part.
We still allocate MLX5E_RX_MAX_HEAD for the skb so that if the networking
stack needs to call pskb_may_pull() later on, we don't need to reallocate
memory.
This gives a nice throughput increase (ARM Neoverse-V2 with CX-7 NIC and
LRO enabled):
BEFORE:
=======
(netserver pinned to core receiving interrupts)
$ netperf -H 10.221.81.118 -T 80,9 -P 0 -l 60 -- -m 256K -M 256K
87380 16384 262144 60.01 32547.82
(netserver pinned to adjacent core receiving interrupts)
$ netperf -H 10.221.81.118 -T 80,10 -P 0 -l 60 -- -m 256K -M 256K
87380 16384 262144 60.00 52531.67
AFTER:
======
(netserver pinned to core receiving interrupts)
$ netperf -H 10.221.81.118 -T 80,9 -P 0 -l 60 -- -m 256K -M 256K
87380 16384 262144 60.00 52896.06
(netserver pinned to adjacent core receiving interrupts)
$ netperf -H 10.221.81.118 -T 80,10 -P 0 -l 60 -- -m 256K -M 256K
87380 16384 262144 60.00 85094.90
Additional tests across a larger range of parameters w/ and w/o LRO, w/
and w/o IPv6-encapsulation, different MTUs (1500, 4096, 9000), different
TCP read/write-sizes as well as UDP benchmarks, all have shown equal or
better performance with this patch.
For XDP pull at most ETH_HLEN bytes in the linear area so that XDP_PASS
can also benefit from this improvement and keep things simple when
dealing with skb geometry changes from the XDP program.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Christoph Paasch <cpaasch@openai.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260601061522.398044-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Doing the call to dma_sync_single_for_cpu() earlier will allow us to
adjust headlen based on the actual size of the protocol headers.
Doing this earlier means that we don't need to call
mlx5e_copy_skb_header() anymore and rather can call
skb_copy_to_linear_data() directly.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Christoph Paasch <cpaasch@openai.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260601061522.398044-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
VLAN-tagged interfaces on lan743x devices were previously unreachable via
SSH and failed to respond to large ping packets (e.g. "ping -s 1469" given
MTU=1500). In these scenarios, "ethtool -S" reports non-zero "RX Oversize
Frame Errors". According to Microchip AN2948, the MAC_RX FSE (VLAN field
size enforcement) bit determines whether frames with VLAN tags exceeding
the base MTU plus tag length are discarded.
The driver must set the MAC_RX.FSE bit before setting MAC_RX.RXEN to allow
VLAN-tagged frames up to the interface MTU, preventing them from being
treated as oversized. As a result, both the base and VLAN-tagged interfaces
can use the same MTU without receive errors.
Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Thangaraj Samynathan <Thangaraj.s@microchip.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Tested-by: Nicolai Buchwitz <nb@tipi-net.de> # lan7430 on arm64 (RevPi
Link: https://patch.msgid.link/20260529210300.433135-1-davthompson@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is a preliminary patch in order to allow the user to select if the
configured device will be used as hw lan or wan.
Please not this patch does not introduce any logical changes, just
cosmetic ones.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260527-airoha-eth-multi-serdes-preliminary-v1-6-ec6ed73ef7fc@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since now multiple net_devices connected to different QDMA blocks can
share the same GDM port, cpu_tx_packets and fwd_tx_packets fields can
be overwritten with the value from a different QDMA block. In order to
fix the issue move cpu_tx_packets and fwd_tx_packets fields from
airoha_gdm_port struct to airoha_gdm_dev one.
Tested-by: Xuegang Lu <xuegang.lu@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260527-airoha-eth-multi-serdes-preliminary-v1-5-ec6ed73ef7fc@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since now multiple net_devices connected to different QDMA blocks can
share the same GDM port, qos_sq_bmap field can be overwritten with the
configuration obtained from a net_device connected to a different QDMA
block. In order to fix the issue move qos_sq_bmap field from
airoha_gdm_port struct to airoha_gdm_dev one.
Add qos_channel_map bitmap in airoha_qdma struct to track if a shared
QDMA channel is already in use by another net_device.
Tested-by: Xuegang Lu <xuegang.lu@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260527-airoha-eth-multi-serdes-preliminary-v1-4-ec6ed73ef7fc@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rename airoha_is_lan_gdm_port in airoha_is_lan_gdm_dev. Moreover, rely
on airoha_gdm_dev pointer in airoha_is_lan_gdm_dev() instead of
airoha_gdm_port one.
This is a preliminary patch to support multiple net_devices connected to
the same GDM{3,4} port via an external hw arbiter.
Tested-by: Xuegang Lu <xuegang.lu@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260527-airoha-eth-multi-serdes-preliminary-v1-3-ec6ed73ef7fc@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move airoha_qdma pointer from airoha_gdm_port struct to airoha_gdm_dev
one since the QDMA block used depends on the particular net_device
WAN/LAN configuration and in the current codebase net_device pointer is
associated to airoha_gdm_dev struct.
This is a preliminary patch to support multiple net_devices connected
to the same GDM{3,4} port via an external hw arbiter.
Tested-by: Xuegang Lu <xuegang.lu@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260527-airoha-eth-multi-serdes-preliminary-v1-2-ec6ed73ef7fc@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
EN7581 and AN7583 SoCs support connecting multiple external SerDes to GDM3
or GDM4 ports via a hw arbiter that manages the traffic in a TDM manner.
As a result multiple net_devices can connect to the same GDM{3,4} port
and there is a theoretical "1:n" relation between GDM port and
net_devices.
Introduce airoha_gdm_dev struct to collect net_device related info (e.g.
net_device and external phy pointer). Please note this is just a
preliminary patch and we are still supporting a single net_device for
each GDM port. Subsequent patches will add support for multiple net_devices
connected to the same GDM port.
Tested-by: Xuegang Lu <xuegang.lu@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260527-airoha-eth-multi-serdes-preliminary-v1-1-ec6ed73ef7fc@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The existing u64_stats_t-based psp counters had two preexisting api
usage bugs: u64_stats_init() was never called on the syncp object, and
the writer side of the u64_stats_update_begin()/end() api was not
serialized. Switch the counters to atomic64_t instead. Atomics need
no initialization and are inherently safe against concurrent writers,
eliminating both bugs at once.
Use atomic64_t rather than atomic_long_t so byte counters don't wrap
at 4 GiB on 32-bit builds.
Fixes: 178f0763c5f3 ("netdevsim: implement psp device stats")
Cc: <stable+noautosel@kernel.org> # netdevsim is a test harness, it's never loaded on production systems
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20260529-fix-psp-stats-v2-2-3a194eacf18e@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
nsim_do_psp() handles both tx and rx psp processing in the sending
device's nsim_start_xmit() path. The existing code has a logical bug,
where we erroneously increment rx_bytes and rx_packets on the sending
devices stats, instead of the peer device.
Additionally, compute psp_len after psp_dev_encapsulate() and before
psp_dev_rcv(), which modifies the header region of the skb. The
existing calculation was actually correct, because psp_dev_rcv()
leaves skb_inner_transport_header pointing at the tcp header, but this
is fragile and confusing as there is no actual inner transport header
after psp_dev_rcv has removed udp encapsulation.
Fixes: 178f0763c5f3 ("netdevsim: implement psp device stats")
Cc: <stable+noautosel@kernel.org> # netdevsim is a test harness, it's never loaded on production systems
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20260529-fix-psp-stats-v2-1-3a194eacf18e@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Writing to the netdevsim debugfs file
"netdevsim/netdevsimN/fib/nexthop_bucket_activity" enters
nsim_nexthop_bucket_activity_write(), which looks up a nexthop in
data->nexthop_ht under rtnl_lock(). If a network namespace teardown,
devlink reload or device deletion runs concurrently, nsim_fib_destroy()
frees that rhashtable (and the surrounding nsim_fib_data) while the
write is still in flight, leading to a slab-use-after-free:
BUG: KASAN: slab-use-after-free in nsim_nexthop_bucket_activity_write+0xb9e/0xdf0
Read of size 4 at addr ff1100001a379808 by task syz.0.11967/27894
CPU: 0 UID: 0 PID: 27894 Comm: syz.0.11967 Not tainted 7.1.0-rc4-gf6f1bfc1980a #4
Call Trace:
nsim_nexthop_bucket_activity_write+0xb9e/0xdf0
full_proxy_write+0x135/0x1a0
vfs_write+0x2e2/0x1040
ksys_write+0x146/0x270
__x64_sys_write+0x76/0xb0
do_syscall_64+0xb9/0x5b0
entry_SYSCALL_64_after_hwframe+0x74/0x7c
Allocated by task 15957:
rhashtable_init_noprof+0x3ec/0x860
nsim_fib_create+0x371/0xca0
nsim_drv_probe+0xd60/0x15c0
...
new_device_store+0x425/0x7f0
Freed by task 24:
rhashtable_free_and_destroy+0x10d/0x620
nsim_fib_destroy+0xc9/0x1c0
nsim_dev_reload_destroy+0x1e7/0x530
nsim_dev_reload_down+0x6b/0xd0
devlink_reload+0x1b5/0x770
devlink_pernet_pre_exit+0x25d/0x3a0
ops_undo_list+0x1b7/0xb90
cleanup_net+0x47f/0x8a0
The buggy address belongs to the object at ff1100001a379800
which belongs to the cache kmalloc-1k of size 1024
The freed 1k object is the bucket table of data->nexthop_ht. Shortly
after, the dangling table is dereferenced again and the machine also
takes a GPF in __rht_bucket_nested() from the same call site.
The root cause is a lifetime mismatch: the debugfs files reference
nsim_fib_data (the writer dereferences data->nexthop_ht), but the
interface is not bracketed around the lifetime of that data.
nsim_fib_destroy() freed both rhashtables and only removed the debugfs
directory afterwards, and nsim_fib_create() created the debugfs files
before the rhashtables were initialized and, on the error path, freed
them before removing the files. debugfs keeps the file itself alive
across a ->write() via debugfs_file_get()/debugfs_file_put()
(fs/debugfs/file.c), but it does not keep data->nexthop_ht alive, so the
in-flight writer dereferenced freed memory. rtnl_lock() in the writer
does not help, because the teardown path does not take rtnl around
rhashtable_free_and_destroy().
Fix it by bracketing the debugfs interface around the data it exposes,
keeping nsim_fib_create() and nsim_fib_destroy() symmetric:
- In nsim_fib_destroy(), tear down the debugfs files before the data
structures they reference. debugfs_remove_recursive() drops the
initial active-user reference and then waits for every in-flight
->write() to drop its reference before returning, and rejects new
opens (__debugfs_file_removed(), fs/debugfs/inode.c). Once it returns,
no debugfs accessor can reach the FIB data, so the rhashtables and
nsim_fib_data can be destroyed safely. This also covers the bool knobs
in the same directory, which store pointers into the same
nsim_fib_data, and the final kfree(data).
- In nsim_fib_create(), create the debugfs files after the rhashtables
and notifiers are set up. This closes the same race on the
error-unwind path, where a concurrent writer could otherwise observe a
half-constructed instance or a table that the unwind has already
freed. (With only the destroy-side change, a writer racing the create
window instead dereferences an uninitialized data->nexthop_ht.)
This is reproducible by racing, in a loop, writes to
/sys/kernel/debug/netdevsim/netdevsimN/fib/nexthop_bucket_activity
against a teardown of the same netdevsim instance -- a devlink reload
("devlink dev reload netdevsim/netdevsimN"), destroying the network
namespace it lives in, or "echo N > /sys/bus/netdevsim/del_device". It
was found with syzkaller; a syzkaller reproducer is available. A
standalone C reproducer does not trigger it reliably because the race
needs the netns-teardown/reload path.
Cc: <stable+noautosel@kernel.org> # netdevsim is a test harness, it's never loaded on production systems
Signed-off-by: Zijing Yin <yzjaurora@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260529135718.1804031-1-yzjaurora@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In some cases, the PHY can use an external ref clock source instead of a
crystal.
Add an optional clock in the PHY node to make sure that the clock source
is enabled, if specified, before probing.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260528184642.33424-3-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce a local pointer for device so devm_kzalloc() fit into
a single line. Also this makes following changes easier to read.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260528184642.33424-2-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
napi_complete_done may call gro_flush_normal (though not currently, as GRO
is unsupported at the moment), which may result in packet TX. This will
eventually result in calling pcnet32_start_xmit - resulting in a deadlock
while trying to re-acquire the already locked spin lock.
It is safe to split the spinlock block into two, because the hardware
registers are still protected from concurrent access, and the two blocks
perform unrelated operations that don't need to happen atomically.
Fixes: 5b2ec6f2be51 ("pcnet32: use napi_complete_done()")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Oscar Maes <oscmaes92@gmail.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260528140320.5556-1-oscmaes92@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The MIPS bcm53xx platform still uses the legacy gpiolib interfaces based
on gpio numbers, but other platforms do not.
Hide these interfaces inside of the existing #ifdef block and use the
modern interfaces in the common parts of the driver to allow building
it when the gpio_set_value() is left out of the kernel.
Reviewed-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260601165716.648230-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add default disable split header flag in all the starfive
soc.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260527084108.121416-5-minda.chen@starfivetech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
