| Age | Commit message (Collapse) | Author |
|---|
|
To initialize the taprio block in lan966x, it is required to configure
the register REVISIT_DLY. The purpose of this register is to set the
delay before revisit the next gate and the value of this register depends
on the system clock. The problem is that the we calculated wrong the value
of the system clock period in picoseconds. The actual system clock is
~165.617754MHZ and this correspond to a period of 6038 pico seconds and
not 15125 as currently set.
Fixes: e462b2717380b4 ("net: lan966x: Add offload support for taprio")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251121061411.810571-1-horatiu.vultur@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
gpy_update_interface() returns early in case the PHY is internal or
connected via USXGMII. In this case the gigabit master/slave property
as well as MDI/MDI-X status also won't be read which seems wrong.
Always read those properties by moving the logic to retrieve them to
gpy_read_status().
Fixes: fd8825cd8c6fc ("net: phy: mxl-gpy: Add PHY Auto/MDI/MDI-X set driver for GPY211 chips")
Fixes: 311abcdddc00a ("net: phy: add support to get Master-Slave configuration")
Suggested-by: "Russell King (Oracle)" <linux@armlinux.org.uk>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/71fccf3f56742116eb18cc070d2a9810479ea7f9.1763650701.git.daniel@makrotopia.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The IRQ numbers created through irq_create_mapping() are only assigned
to ptpmsg_irq[n].num at the end of the IRQ setup. So if an error occurs
between their creation and their assignment (for instance during the
request_threaded_irq() step), we enter the error path and fail to
release the newly created virtual IRQs because they aren't yet assigned
to ptpmsg_irq[n].num.
Move the mapping creation to ksz_ptp_msg_irq_setup() to ensure symetry
with what's released by ksz_ptp_msg_irq_free().
In the error path, move the irq_dispose_mapping to the out_ptp_msg label
so it will be called only on created IRQs.
Cc: stable@vger.kernel.org
Fixes: cc13ab18b201 ("net: dsa: microchip: ptp: enable interrupt for timestamping")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20251120-ksz-fix-v6-5-891f80ae7f8f@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If a port interrupt setup fails after at least one port has already been
successfully initialized, the gotos miss some resource releasing:
- the already initialized PTP IRQs aren't released
- the already initialized port IRQs aren't released if the failure
occurs in ksz_pirq_setup().
Merge 'out_girq' and 'out_ptpirq' into a single 'port_release' label.
Behind this label, use the reverse loop to release all IRQ resources
for all initialized ports.
Jump in the middle of the reverse loop if an error occurs in
ksz_ptp_irq_setup() to only release the port IRQ of the current
iteration.
Cc: stable@vger.kernel.org
Fixes: c9cd961c0d43 ("net: dsa: microchip: lan937x: add interrupt support for port phy link")
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20251120-ksz-fix-v6-4-891f80ae7f8f@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If something goes wrong at setup, ksz_irq_free() can be called on
uninitialized ksz_irq (for example when ksz_ptp_irq_setup() fails). It
leads to freeing uninitialized IRQ numbers and/or domains.
Use dsa_switch_for_each_user_port_continue_reverse() in the error path
to iterate only over the fully initialized ports.
Cc: stable@vger.kernel.org
Fixes: cc13ab18b201 ("net: dsa: microchip: ptp: enable interrupt for timestamping")
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20251120-ksz-fix-v6-3-891f80ae7f8f@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
irq_find_mapping() returns a positive IRQ number or 0 if no IRQ is found
but it never returns a negative value. However, during the PTP IRQ setup,
we verify that its returned value isn't negative.
Fix the irq_find_mapping() check to enter the error path when 0 is
returned. Return -EINVAL in such case.
Cc: stable@vger.kernel.org
Fixes: cc13ab18b201 ("net: dsa: microchip: ptp: enable interrupt for timestamping")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20251120-ksz-fix-v6-2-891f80ae7f8f@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
irq_find_mapping() returns a positive IRQ number or 0 if no IRQ is found
but it never returns a negative value. However, on each
irq_find_mapping() call, we verify that the returned value isn't
negative.
Fix the irq_find_mapping() checks to enter error paths when 0 is
returned. Return -EINVAL in such cases.
CC: stable@vger.kernel.org
Fixes: c9cd961c0d43 ("net: dsa: microchip: lan937x: add interrupt support for port phy link")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20251120-ksz-fix-v6-1-891f80ae7f8f@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
ATL2 hardware was missing descriptor cache invalidation in hw_stop(),
causing SMMU translation faults during device shutdown and module removal:
[ 70.355743] arm-smmu-v3 arm-smmu-v3.5.auto: event 0x10 received:
[ 70.361893] arm-smmu-v3 arm-smmu-v3.5.auto: 0x0002060000000010
[ 70.367948] arm-smmu-v3 arm-smmu-v3.5.auto: 0x0000020000000000
[ 70.374002] arm-smmu-v3 arm-smmu-v3.5.auto: 0x00000000ff9bc000
[ 70.380055] arm-smmu-v3 arm-smmu-v3.5.auto: 0x0000000000000000
[ 70.386109] arm-smmu-v3 arm-smmu-v3.5.auto: event: F_TRANSLATION client: 0001:06:00.0 sid: 0x20600 ssid: 0x0 iova: 0xff9bc000 ipa: 0x0
[ 70.398531] arm-smmu-v3 arm-smmu-v3.5.auto: unpriv data write s1 "Input address caused fault" stag: 0x0
Commit 7a1bb49461b1 ("net: aquantia: fix potential IOMMU fault after
driver unbind") and commit ed4d81c4b3f2 ("net: aquantia: when cleaning
hw cache it should be toggled") fixed cache invalidation for ATL B0, but
ATL2 was left with only interrupt disabling. This allowed hardware to
write to cached descriptors after DMA memory was unmapped, triggering
SMMU faults. Once cache invalidation is applied to ATL2, the translation
fault can't be observed anymore.
Add shared aq_hw_invalidate_descriptor_cache() helper and use it in both
ATL B0 and ATL2 hw_stop() implementations for consistent behavior.
Fixes: e54dcf4bba3e ("net: atlantic: basic A2 init/deinit hw_ops")
Tested-by: Carol Soto <csoto@nvidia.com>
Signed-off-by: Kai-Heng Feng <kaihengf@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251120041537.62184-1-kaihengf@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fixed a sparse warning:
ipvlan_core.c:56: warning: incorrect type in argument 1
(different base types) expected unsigned int [usertype] a
got restricted __be32 const [usertype] s_addr
Force cast the s_addr to u32
Signed-off-by: Dmitry Skorodumov <skorodumov.dmitry@huawei.com>
Link: https://patch.msgid.link/20251121155112.4182007-1-skorodumov.dmitry@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 84eaf4359c36 ("net: ethtool: add get_rx_ring_count callback to
optimize RX ring queries") added specific support for GRXRINGS callback,
simplifying .get_rxnfc.
Remove the handling of GRXRINGS in .get_rxnfc() by moving it to the new
.get_rx_ring_count() for the mvpp2 driver.
This simplifies the RX ring count retrieval and aligns mvpp2 with the new
ethtool API for querying RX ring parameters, while keeping the other
rxnfc handlers (GRXCLSRLCNT, GRXCLSRULE, GRXCLSRLALL) intact.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20251121-marvell-v1-2-8338f3e55a4c@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert the mvneta driver to use the new .get_rx_ring_count ethtool
operation instead of implementing .get_rxnfc solely for handling
ETHTOOL_GRXRINGS command. This simplifies the code by removing the
switch statement and replacing it with a direct return of the queue
count.
The new callback provides the same functionality in a more direct way,
following the ongoing ethtool API modernization.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20251121-marvell-v1-1-8338f3e55a4c@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert the hyperv netvsc driver to use the new .get_rx_ring_count
ethtool operation instead of implementing .get_rxnfc solely for handling
ETHTOOL_GRXRINGS command. This simplifies the code by replacing the
switch statement with a direct return of the queue count.
The new callback provides the same functionality in a more direct way,
following the ongoing ethtool API modernization.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20251121-hyperv_gxrings-v1-1-31293104953b@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This return statement is indented one tab too far. Delete a tab.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/aSBqjtA8oF25G1OG@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In 2009, commit c82f63e411f1 ("PCI: check saved state before restore")
changed the behavior of pci_restore_state() such that it became necessary
to call pci_save_state() afterwards, lest recovery from subsequent PCI
errors fails.
The commit has just been reverted and so all the pci_save_state() after
pci_restore_state() calls that have accumulated in the tree are now
superfluous. Drop them.
Two drivers chose a different approach to achieve the same result:
drivers/scsi/ipr.c and drivers/net/ethernet/intel/e1000e/netdev.c set the
pci_dev's "state_saved" flag to true before calling pci_restore_state().
Drop this as well.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> # qat
Link: https://patch.msgid.link/c2b28cc4defa1b743cf1dedee23c455be98b397a.1760274044.git.lukas@wunner.de
|
|
In mt7615_mcu_wtbl_sta_add(), an skb sskb is allocated. If the
subsequent call to mt76_connac_mcu_alloc_wtbl_req() fails, the function
returns an error without freeing sskb, leading to a memory leak.
Fix this by calling dev_kfree_skb() on sskb in the error handling path
to ensure it is properly released.
Fixes: 99c457d902cf9 ("mt76: mt7615: move mt7615_mcu_set_bmc to mt7615_mcu_ops")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251113062415.103611-1-zilin@seu.edu.cn
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Set the MT76_STATE_MCU_RUNNING bit only after mt7921_load_clc()
has successfully completed. Previously, the MCU_RUNNING state
was set before loading CLC, which could cause conflict between
chip mcu_init retry and mac_reset flow, result in chip init fail
and chip abnormal status. By moving the state set after CLC load,
firmware initialization becomes robust and resolves init fail issue.
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Reviewed-by: druth@chromium.org
Link: https://patch.msgid.link/19ec8e4465142e774f17801025accd0ae2214092.1763465933.git.quan.zhou@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
On systems I have with mt7925 cards I've been noticing a blank line in my
kernel logs. IE:
```
[ 17.294105] mt7925e 0000:c3:00.0: HW/SW Version: 0x8a108a10, Build Time: 20250721232852a
[ 17.314233] r8169 0000:c4:00.0 enp196s0f0: Link is Down
```
This is because the build_date from the header has a newline character
as does the dev_info() print. As the firmware isn't guaranteed to always
have a newline but the print is, copy the firmware build date to a
temporary variable and strip any whitespace from it before showing it in
the logs.
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20251120155829.3494747-1-superm1@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Grab the mt76 mutex running mt7996_mac_sta_rc_work() since it is
required by mt7996_mcu_add_rate_ctrl routine.
Fixes: 28d519d0d493a ("wifi: mt76: Move RCU section in mt7996_mcu_add_rate_ctrl_fixed()")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251118-mt7996-rc-work-missing-mtx-v1-1-0739c493a6cb@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
mt7996_vif_link_remove routine is executed by mt76_scan_complete()
without holding the wiphy mutex triggering the following lockdep warning.
WARNING: CPU: 0 PID: 72 at net/mac80211/key.c:1029 ieee80211_iter_keys+0xe4/0x1a0 [mac80211]
CPU: 0 UID: 0 PID: 72 Comm: kworker/u32:2 Tainted: G S 6.18.0-rc5+ #27 PREEMPT(full)
Tainted: [S]=CPU_OUT_OF_SPEC
Hardware name: Default string Default string/SKYBAY, BIOS 5.12 02/15/2023
Workqueue: phy3 mt76_scan_work [mt76]
RIP: 0010:ieee80211_iter_keys+0xe4/0x1a0 [mac80211]
Code: 4c 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 8b 47 48 be ff ff ff ff 48 8d 78 68 e8 b4 eb 1e e1 85 c0 0f 85 49
ff ff ff 4c 8b ab 90 1a 00 00 48 8d 83 90
RSP: 0018:ffffc900002f7cb0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888127e00ee0 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff888127e00788 RDI: ffff88811132b5c8
RBP: ffffffffa0ddf400 R08: 0000000000000001 R09: 000000009dcc1dac
R10: 0000000000000001 R11: ffff88811132b5a0 R12: ffffc900002f7d00
R13: ffff8882581e6a80 R14: ffff888127e0afc8 R15: ffff888158832038
FS: 0000000000000000(0000) GS:ffff8884da486000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000030a0fd90 CR3: 0000000002c52004 CR4: 00000000003706f0
Call Trace:
<TASK>
? lock_acquire+0xc2/0x2c0
mt7996_vif_link_remove+0x64/0x2b0 [mt7996e]
mt76_put_vif_phy_link+0x41/0x50 [mt76]
mt76_scan_complete+0x77/0x100 [mt76]
mt76_scan_work+0x2eb/0x3f0 [mt76]
? process_one_work+0x1e5/0x6d0
process_one_work+0x221/0x6d0
worker_thread+0x19a/0x340
? rescuer_thread+0x450/0x450
kthread+0x108/0x220
? kthreads_online_cpu+0x110/0x110
ret_from_fork+0x1c6/0x220
? kthreads_online_cpu+0x110/0x110
ret_from_fork_asm+0x11/0x20
</TASK>
irq event stamp: 45471
hardirqs last enabled at (45477): [<ffffffff813d446e>] __up_console_sem+0x5e/0x70
hardirqs last disabled at (45482): [<ffffffff813d4453>] __up_console_sem+0x43/0x70
softirqs last enabled at (44500): [<ffffffff81f2ae0c>] napi_pp_put_page+0xac/0xd0
softirqs last disabled at (44498): [<ffffffff81fa32a0>] page_pool_put_unrefed_netmem+0x290/0x3d0
---[ end trace 0000000000000000 ]---
Fix the issue skipping ieee80211_iter_keys() for scanning links in
mt7996_vif_link_remove routine since we have not uploaded any hw keys
for these links.
Fixes: 04414d7bba78 ("wifi: mt76: mt7996: delete vif keys when requested")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Tested-by: Ben Greear <greearb@candelatech.com>
Link: https://patch.msgid.link/20251115-mt7996-key-iter-link-remove-fix-v1-1-4f3f4e1eaa78@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Do not take into account offchannel links for deflink accounting.
Fixes: a3316d2fc669f ("wifi: mt76: mt7996: set vif default link_id adding/removing vif links")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Tested-by: Ben Greear <greearb@candelatech.com>
Link: https://patch.msgid.link/20251114-mt76-fix-missing-mtx-v1-4-259ebf11f654@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Move mt76_abort_scan routine out of mt76_reset_device() in order to
avoid a possible deadlock since mt76_reset_device routine is running
with mt76 mutex help and mt76_abort_scan_complete() can grab mt76 mutex
in some cases.
Fixes: b36d55610215a ("wifi: mt76: abort scan/roc on hw restart")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Tested-by: Ben Greear <greearb@candelatech.com>
Link: https://patch.msgid.link/20251114-mt76-fix-missing-mtx-v1-3-259ebf11f654@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Move mt7996_update_beacons routine inside mt76 mutex critical section
in mt7996_mac_reset_work() in order to run mt7996_vif_conf_link() in
mt7996_mcu_add_beacon routine.
Fixes: f30906c55a400 ("wifi: mt76: mt7996: disable beacons when going offchannel")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Tested-by: Ben Greear <greearb@candelatech.com>
Link: https://patch.msgid.link/20251114-mt76-fix-missing-mtx-v1-2-259ebf11f654@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Grab mt76 mutex in mt7996_mac_sta_event routine in order to rely on
mt76_dereference() utility macro.
Fixes: ecd72f9695e7e ("wifi: mt76: mt7996: Support MLO in mt7996_mac_sta_event()")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Tested-by: Ben Greear <greearb@candelatech.com>
Link: https://patch.msgid.link/20251114-mt76-fix-missing-mtx-v1-1-259ebf11f654@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Set the 6GHz HE A-MPDU density from the hardware capability instead of a
hardcoded value, ensuring accurate capability reporting.
Signed-off-by: Michael Lo <michael.lo@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20251106092151.1061648-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
The RRO EMI rings only need to be allocated when WED is not active.
This patch fixes command timeout issue for the setting of WED off and
RRO on.
Fixes: 3a29164425e9 ("wifi: mt76: mt7996: Add SW path for HW-RRO v3.1")
Co-developed-by: Rex Lu <rex.lu@mediatek.com>
Signed-off-by: Rex Lu <rex.lu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251106064203.1000505-12-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Pass the correct mt7996_phy to mt7996_run().
Fixes: 0a5df0ec47f7 ("wifi: mt76: mt7996: remove redundant per-phy mac80211 calls during restart")
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251106064203.1000505-11-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
This patch fixes the following key issues:
- Pass correct link BSS to mt7996_mcu_add_key(), and use HW beacon
protection mode for mt7990 chipset
- Do not do group key deletion for GTK and IGTK due to FW design, the
delete key command will delete all group keys of a link BSS
- For deleting BIGTK, FW adds a new flow, but the "sec->add" field
should be filled with "SET_KEY". Note that if BIGTK is not deleted, it
will cause beacon decryption issue when switching from an AP interface
to a station interface
Fixes: 0c45d52276fd ("wifi: mt76: mt7996: fix setting beacon protection keys")
Co-developed-by: Allen Ye <allen.ye@mediatek.com>
Signed-off-by: Allen Ye <allen.ye@mediatek.com>
Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20251106064203.1000505-10-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Fix extender mode and MBSS issues caused by incorrect assignment of the
MLD group and remap indices.
Fixes: ed01c310eca9 ("wifi: mt76: mt7996: Fix mt7996_mcu_bss_mld_tlv routine")
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251106064203.1000505-9-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Obtain the correct link ID and, if needed, switch to the corresponding
wcid before populating the TX descriptor and TX payload.
Rules for link id:
- For QoS data of MLD peers (excluding EAPOL), select the primary or
secondary wcid based on whether the TID is odd or even to meet FW/HW
requirements
- For other packets, use IEEE80211_TX_CTRL_MLO_LINK if specified
(such as multicast and broadcast packets)
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251106064203.1000505-8-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
This ensures the upper layer uses the correct link ID during packet
processing.
Fixes: dd82a9e02c05 ("wifi: mt76: mt7996: Rely on mt7996_sta_link in sta_add/sta_remove callbacks")
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251106064203.1000505-7-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
For an MLD peer, we only need to call the teardown command when removing
the last link, and there's no need to call mt7996_mcu_add_sta() for the
earlier links.
Fixes: c1d6dd5d03eb ("wifi: mt76: mt7996: Add mt7996_mcu_teardown_mld_sta rouine")
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251106064203.1000505-6-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Fix several fields in mt7996_mcu_bss_basic_tlv() that were not obtained
from the correct link. Without this patch, the MLD station interface
does not function properly.
Fixes: 34a41bfbcb71 ("wifi: mt76: mt7996: prepare mt7996_mcu_add_dev/bss_info for MLO support")
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251106064203.1000505-5-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Introduce mt7996_link_sta_add_debugfs() to extend fixed rate support for
MLO link station.
Co-developed-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20251106064203.1000505-4-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Fix the ibf_timeout field for mt7996, mt7992 and mt7990 chipsets. For
the mt7992, this value shall be set as 0xff, while the others shall be
set as 0x18.
Fixes: ad4c9a8a9803 ("wifi: mt76: mt7996: add implicit beamforming support for mt7992")
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20251106064203.1000505-3-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
For the SDO unified command, driver does not need to wait for ACK event so
do not mark MCU_CMD_ACK in command header.
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20251106064203.1000505-2-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Since wiphy->available_antennas_tx now accumulates the chainmask of all
the radios of a wiphy, use phy->orig_antenna_mask to get the original
max nss for comparison.
Fixes: 69d54ce7491d ("wifi: mt76: mt7996: switch to single multi-radio wiphy")
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20251106064203.1000505-1-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
The implementation amounts to setting the driver flag
IEEE80211_VIF_SUPPORTS_CQM_RSSI, and then providing
mechanisms for continuously updating enough information
to be able to provide notifications to userspace when
RSSI drops below a certain threshold
Signed-off-by: Jack Kao <jack.kao@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20251001012506.2168037-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
For more details see the Link tag below.
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
Switch to using system_percpu_wq because system_wq is going away as part of
a workqueue restructuring.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20250922093243.140946-2-marco.crivellari@suse.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Passing a BSS conf pointer to mt76_connac2_mac_tx_rate_val() currently has
two inconsistencies.
When called from mt76_connac2_mac_write_txwi(), BSS conf is got by
dereferencing a vif pointer. A NULL vif isn't accounted for though the
function itself supposes it to be NULL and tries to handle this case in
previous checks. This looks like a cosmetic change since the drivers
calling the function (namely, mt7915 and mt7921) set WANT_MONITOR_VIF flag
so judging by info->control.vif initialization inside ieee80211_tx_*()
routines it can't actually come as NULL here.
The same holds for the BSS conf pointer handling inside
mt76_connac2_mac_tx_rate_val(). It is dereferenced before being checked
for NULL. The function supposes to handle the case so reorder the check
and dereference of the pointer. Again, this looks like a syntax issue
only.
Found by Linux Verification Center (linuxtesting.org) with SVACE static
analysis tool.
Co-developed-by: Matvey Kovalev <matvey.kovalev@ispras.ru>
Signed-off-by: Matvey Kovalev <matvey.kovalev@ispras.ru>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Link: https://patch.msgid.link/20251027111843.38975-2-pchelkin@ispras.ru
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
This reverts commit 55e95ce469d0c61041bae48b2ebb7fcbf6d1ba7f.
mt792x drivers don't seem to support multi-radio devices yet. At least
they don't mess with `struct wiphy_radio` at the moment.
Packet capturing on monitor interface doesn't work after the blamed patch:
tcpdump -i wls6mon -n -vvv
Revert the NO_VIRTUAL_MONITOR feature for now to resolve the issue.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 55e95ce469d0 ("wifi: mt76: mt792x: improve monitor interface handling")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Link: https://patch.msgid.link/20251027111843.38975-1-pchelkin@ispras.ru
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Update functions which copy to and from MMIO to load bytes as Little
Endian, and also support unaligned buffers.
PCI devices almost universally use Little Endian ordering for MMIO
registers, mt76 is no exception. PCI hardware that is designed to work
with Big Endian CPUs often (but not always) "helps" by transparently
byte-swapping MMIO reads and writes on the wire. If this is enabled
then it cannot be turned off for a single write. On hardware which does
not support this, writel() does the swap in software. When we are
transferring arbitrary bytes to MMIO space, we need them to arrive in
the same order they were in memory, so when the hardware swaps them
this is a problem. Rather than care about how our PCI host controller
works, we instead load bytes as Little Endian - so on a Big Endian
machine this will reverse them, then we use writel() which will put
them back in the right order again. This way we do not make it our
business whether the swapping is done in software or hardware.
Furthermore, inspection of the code shows that these functions are
often called with stack-allocated u8 arrays which have no alignment
guarantees so we now use (get|put)_unaligned_le32().
Fixes this issue:
mt76x2e 0000:02:00.0: ROM patch build: 20141115060606a
mt76x2e 0000:02:00.0: Firmware Version: 0.0.00
mt76x2e 0000:02:00.0: Build: 1
mt76x2e 0000:02:00.0: Build Time: 201607111443____
mt76x2e 0000:02:00.0: Firmware failed to start
mt76x2e 0000:02:00.0: probe with driver mt76x2e failed with error -145
Tested on:
SmartFiber XP8421-B (Big Endian MIPS 34Kc)
- MT7612 -> 5g / ap / psk2
- MT7603 -> 2g / sta / psk2
- MT7603 -> 2g / ap / psk2
TpLink Archer v1200v-v2 (Big Endian MIPS 34Kc)
- MT7613 -> 5g / ap / psk2
- MT7603 -> 2g / sta / psk2
Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr>
Link: https://patch.msgid.link/20251029184143.3991388-1-cjd@cjdns.fr
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Add regd_user flag to block automatic regulatory domain updates
if set by user.
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20251031090352.1400079-7-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Implement 802.11d-based automatic regulatory domain switching to
dynamically determine the regulatory domain at runtime.
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20251031090352.1400079-6-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Move EHT flag handling into mt7925_regd_channel_update() to ensure
correct channel capability reporting.
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20251031090352.1400079-5-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Rename mt7925_regd_update() to mt7925_mcu_regd_update() to centralize
regd updates with error handling.
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20251031090352.1400079-4-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Move the disable_clc module parameter to regd.c and introduce
mt7925_regd_clc_supported() to centralize CLC support checks.
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20251031090352.1400079-3-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Move regd logic to regd.c and regd.h files
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20251031090352.1400079-2-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Use the newly added of_reserved_mem_region_to_resource() function to
handle "memory-region" properties.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251031175113.1453100-1-robh@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Fix two minor comment typos in the mt7996 driver:
- "Tx/Tx" -> "Rx/Tx"
- "tnterrupt" -> "interrupt"
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20251021064812.1778297-1-alok.a.tiwari@oracle.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Introduce Airoha NPU support to MT7996 driver. NPU is used to enable
traffic forward offloading between the MT76 NIC and the Airoha ethernet one
available on the Airoha EN7581 SoC using Netfilter Flowtable APIs.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251017-mt76-npu-devel-v2-5-ddaa90901723@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
