| Age | Commit message (Collapse) | Author |
|---|
|
gswip_vlan_remove()
"bool pvid" is unused since commit "net: dsa: lantiq_gswip: remove
legacy configure_vlan_while_not_filtering option".
"bool vlan_aware" shouldn't have a role in finding the bridge VLAN.
It should be identified by VID regardless of VLAN-aware or VLAN-unaware.
The driver sets up VID 0 for the VLAN-unaware PVID.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/c63f89ca19269ef6c8bf00a62cacc739164b4441.1760566491.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
User space can force the altering of VID 0 as it was privately set up by
this driver.
For example, when the port joins a VLAN-aware bridge,
dsa_user_manage_vlan_filtering() will set NETIF_F_HW_VLAN_CTAG_FILTER.
If the port is subsequently brought up and CONFIG_VLAN_8021Q is enabled,
the vlan_vid0_add() function will want to make sure we are capable of
accepting packets tagged with VID 0.
Generally, DSA/switchdev drivers want to suppress that bit of help from
the 8021q layer, and handle VID 0 filters themselves. The 8021q layer
might actually be even detrimential, because VLANs added through
vlan_vid_add() pass through dsa_user_vlan_rx_add_vid(), which is
documented as this:
/* This API only allows programming tagged, non-PVID VIDs */
.flags = 0,
so it will force VID 0 to be reconfigured as egress-tagged, non-PVID.
Whereas the driver configures it as PVID and egress-untagged, the exact
opposite.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/9f68340c34b5312c3b8c6c7ecf3cfce574a3f65d.1760566491.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver should now tolerate these changes, now that the PVID is
automatically recalculated on a VLAN awareness state change.
The VLAN-unaware PVID must be installed to hardware even if the
joined bridge is currently VLAN-aware. Otherwise, when the bridge VLAN
filtering state dynamically changes to VLAN-unaware later, this PVID
will be missing.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/c58759074fb699581336dc2c2c6bf106257b134e.1760566491.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This driver doesn't support dynamic VLAN filtering changes, for simplicity.
It expects that on a port, either gswip_vlan_add_unaware() or
gswip_vlan_add_aware() is called, but not both.
When !br_vlan_enabled(), the configure_vlan_while_not_filtering = false
option is exactly what will prevent calls to gswip_port_vlan_add() from
being issued by DSA.
In fact, at the time these features were submitted:
https://patchwork.ozlabs.org/project/netdev/patch/20190501204506.21579-3-hauke@hauke-m.de/
"configure_vlan_while_not_filtering = false" did not even have a name,
it was implicit behaviour. It only became legacy in commit 54a0ed0df496
("net: dsa: provide an option for drivers to always receive bridge
VLANs").
Section "Bridge VLAN filtering" of Documentation/networking/switchdev.rst
describes the exact set of rules. Notably, the PVID of the port must
follow the VLAN awareness state of the bridge port. A VLAN-unaware
bridge port should not respond to the addition of a bridge VLAN with the
PVID flag. In fact, the pvid_change() test in
tools/testing/selftests/net/forwarding/bridge_vlan_unaware.sh tests
exactly this.
The lantiq_gswip driver indeed does not respond to the addition of PVID
VLANs while VLAN-unaware in the way described above, but only because of
configure_vlan_while_not_filtering. Our purpose here is to get rid of
configure_vlan_while_not_filtering, so we must add more complex logic
which follows the VLAN awareness state and walks through the Active VLAN
table entries, to find the index of the PVID register that should be
committed to hardware on each port.
As a side-effect of now having a proper implementation to assign the
PVID all the "VLAN upper: ..." tests of the local_termination.sh self-
tests which would previously all FAIL now all PASS (or XFAIL, but
that's ok).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/47dab8a8b69ebb92624b9795b723114475d3fe4e.1760566491.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
gswip_vlan_add_aware()
The two functions largely duplicate functionality. The differences
consist in:
- the "fid" passed to gswip_vlan_active_create(). The unaware variant
always passes -1, the aware variant passes fid = priv->vlans[i].fid,
where i is an index into priv->vlans[] for which priv->vlans[i].bridge
is equal to the given bridge.
- the "vid" is not passed to gswip_vlan_add_unaware(). It is implicitly
GSWIP_VLAN_UNAWARE_PVID (zero).
- The "untagged" is not passed to gswip_vlan_add_unaware(). It is
implicitly true. Also, the CPU port must not be a tag member of the
PVID used for VLAN-unaware bridging.
- The "pvid" is not passed to gswip_vlan_add_unaware(). It is implicitly
true.
- The GSWIP_PCE_DEFPVID(port) register is written by the aware variant
with an "idx", but with a hardcoded 0 by the unaware variant.
Merge the two functions into a single unified function without any
functional changes.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/2be190701d4c17038ce4b8047f9fb0bdf8abdf6e.1760566491.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When idx == -1 in gswip_vlan_add(), we set vlan_mapping.val[0] = vid,
even though we do the exact same thing again outside the if/else block.
Remove the duplicate assignment.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/039ecb48e038cea856a9a6230ad1543db2bc382d.1760566491.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds an explicit definition for VID 0 to the Lantiq GSWIP DSA
driver, clarifying its special meaning.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/e8862239d0bb727723cf60947d2262473b46c96d.1760566491.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, the driver takes the bridge from dsa_port_bridge_dev_get(),
which only works for user ports. This is why it has to ignore FDB
entries installed on the CPU port.
Commit c26933639b54 ("net: dsa: request drivers to perform FDB
isolation") introduced the possibility of getting the originating bridge
from the passed dsa_db argument, so let's do that instead. This way, we
can act on the local FDB entries coming from the bridge.
Note that we do not expect FDB events for the DSA_DB_PORT database,
because this driver doesn't fulfill the dsa_switch_supports_uc_filtering()
requirements. So we can just return -EOPNOTSUPP and expect it will never
be triggered.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/ed9d847c0356f0fec81422bdad9ebdcc6a59da79.1760566491.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There's a good chance that more chip versions suffer from the same
hw issue. So let's reconfigure rx unconditionally before the chip reset
when resuming. This shouldn't have any side effect on unaffected chip
versions.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/a5c2e2d2-226f-4896-b8f6-45e2d91f0e24@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When splitting the RTL8221B-VM-CG into C22 and C45 variants, the name was
accidentally changed to RTL8221B-VN-CG. This patch brings back the previous
part number.
Fixes: ad5ce743a6b0 ("net: phy: realtek: Add driver instances for rtl8221b via Clause 45")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251016192325.2306757-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The blamed commit increased the needed headroom to account for
alignment. This means that the size required to always align a Tx buffer
was added inside the dpaa2_eth_needed_headroom() function. By doing
that, a manual adjustment of the pointer passed to PTR_ALIGN() was no
longer correct since the 'buffer_start' variable was already pointing
to the start of the skb's memory.
The behavior of the dpaa2-eth driver without this patch was to drop
frames on Tx even when the headroom was matching the 128 bytes
necessary. Fix this by removing the manual adjust of 'buffer_start' from
the PTR_MODE call.
Closes: https://lore.kernel.org/netdev/70f0dcd9-1906-4d13-82df-7bbbbe7194c6@app.fastmail.com/T/#u
Fixes: f422abe3f23d ("dpaa2-eth: increase the needed headroom to account for alignment")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251016135807.360978-1-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch fixes ce7a381697cb ("net: bonding: add broadcast_neighbor option for 802.3ad").
Before this commit, on the broadcast mode, all devices were traversed using the
bond_for_each_slave_rcu. This patch supports traversing devices by using all_slaves.
Therefore, we need to update the slave array when enslave or release slave.
Fixes: ce7a381697cb ("net: bonding: add broadcast_neighbor option for 802.3ad")
Cc: Simon Horman <horms@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: <stable@vger.kernel.org>
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Tested-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/all/a97e6e1e-81bc-4a79-8352-9e4794b0d2ca@kernel.org/
Signed-off-by: Tonghao Zhang <tonghao@bamaicloud.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Link: https://patch.msgid.link/20251016125136.16568-1-tonghao@bamaicloud.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ENETC RX ring uses the page halves flipping mechanism, each page is
split into two halves for the RX ring to use. And ENETC_RXB_TRUESIZE is
defined to 2048 to indicate the size of half a page. However, the page
size is configurable, for ARM64 platform, PAGE_SIZE is default to 4K,
but it could be configured to 16K or 64K.
When PAGE_SIZE is set to 16K or 64K, ENETC_RXB_TRUESIZE is not correct,
and the RX ring will always use the first half of the page. This is not
consistent with the description in the relevant kernel doc and commit
messages.
This issue is invisible in most cases, but if users want to increase
PAGE_SIZE to receive a Jumbo frame with a single buffer for some use
cases, it will not work as expected, because the buffer size of each
RX BD is fixed to 2048 bytes.
Based on the above two points, we expect to correct ENETC_RXB_TRUESIZE
to (PAGE_SIZE >> 1), as described in the comment.
Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://patch.msgid.link/20251016080131.3127122-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After applying the workaround for err050089, the LS1028A platform
experiences RCU stalls on RT kernel. This issue is caused by the
recursive acquisition of the read lock enetc_mdio_lock. Here list some
of the call stacks identified under the enetc_poll path that may lead to
a deadlock:
enetc_poll
-> enetc_lock_mdio
-> enetc_clean_rx_ring OR napi_complete_done
-> napi_gro_receive
-> enetc_start_xmit
-> enetc_lock_mdio
-> enetc_map_tx_buffs
-> enetc_unlock_mdio
-> enetc_unlock_mdio
After enetc_poll acquires the read lock, a higher-priority writer attempts
to acquire the lock, causing preemption. The writer detects that a
read lock is already held and is scheduled out. However, readers under
enetc_poll cannot acquire the read lock again because a writer is already
waiting, leading to a thread hang.
Currently, the deadlock is avoided by adjusting enetc_lock_mdio to prevent
recursive lock acquisition.
Fixes: 6d36ecdbc441 ("net: enetc: take the MDIO lock only once per NAPI poll cycle")
Signed-off-by: Jianpeng Chang <jianpeng.chang.cn@windriver.com>
Acked-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20251015021427.180757-1-jianpeng.chang.cn@windriver.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In {tcp6,udp6,raw6}_sock, struct ipv6_pinfo is always placed at
the beginning of a new cache line because
1. __alignof__(struct tcp_sock) is 64 due to ____cacheline_aligned
of __cacheline_group_begin(tcp_sock_write_tx)
2. __alignof__(struct udp_sock) is 64 due to ____cacheline_aligned
of struct numa_drop_counters
3. in raw6_sock, struct numa_drop_counters is placed before
struct ipv6_pinfo
. struct ipv6_pinfo is 136 bytes, but the last cache line is
only used by ipv6_fl_list:
$ pahole -C ipv6_pinfo vmlinux
struct ipv6_pinfo {
...
/* --- cacheline 2 boundary (128 bytes) --- */
struct ipv6_fl_socklist * ipv6_fl_list; /* 128 8 */
/* size: 136, cachelines: 3, members: 23 */
Let's move ipv6_fl_list from struct ipv6_pinfo to struct inet_sock
to save a full cache line for {tcp6,udp6,raw6}_sock.
Now, struct ipv6_pinfo is 128 bytes, and {tcp6,udp6,raw6}_sock have
64 bytes less, while {tcp,udp,raw}_sock retain the same size.
Before:
# grep -E "^(RAW|UDP[^L\-]|TCP)" /proc/slabinfo | awk '{print $1, "\t", $4}'
RAWv6 1408
UDPv6 1472
TCPv6 2560
RAW 1152
UDP 1280
TCP 2368
After:
# grep -E "^(RAW|UDP[^L\-]|TCP)" /proc/slabinfo | awk '{print $1, "\t", $4}'
RAWv6 1344
UDPv6 1408
TCPv6 2496
RAW 1152
UDP 1280
TCP 2368
Also, ipv6_fl_list and inet_flags (SNDFLOW bit) are placed in the
same cache line.
$ pahole -C inet_sock vmlinux
...
/* --- cacheline 11 boundary (704 bytes) was 56 bytes ago --- */
struct ipv6_pinfo * pinet6; /* 760 8 */
/* --- cacheline 12 boundary (768 bytes) --- */
struct ipv6_fl_socklist * ipv6_fl_list; /* 768 8 */
unsigned long inet_flags; /* 776 8 */
Doc churn is due to the insufficient Type column (only 1 space short).
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251014224210.2964778-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
support pci_driver.shutdown() for hibmcge driver.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20251014134018.1178385-1-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
is down
If the interface is down, the CAN controller might be powered down, the
clock disabled, and/or it's external reset asserted.
Don't wake up the controller to read the CAN bus error counters, if the
interface is down.
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://patch.msgid.link/20251008-m_can-cleanups-v1-7-1784a18eaa84@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
m_can_tx_submit() is only called for peripheral devices. So remove the
sanity check.
Link: https://patch.msgid.link/20251008-m_can-cleanups-v1-6-1784a18eaa84@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
devm_kzalloc() fails
If devm_kzalloc() fails, it already outputs an error message. Remove the
error message from m_can_class_register() accordingly.
Link: https://patch.msgid.link/20251008-m_can-cleanups-v1-5-1784a18eaa84@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
coding it
As everywhere else in the driver, use m_can_write() instead of open coding
it.
Link: https://patch.msgid.link/20251008-m_can-cleanups-v1-4-1784a18eaa84@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
To ease debugging use the netdev_{dbg,info,err}() functions instead of
dev_{dbg,info,err}.
Link: https://patch.msgid.link/20251008-m_can-cleanups-v1-3-1784a18eaa84@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The original use of struct m_can_classdev::hrtimer was to support polling
for devices without IRQ, with the timer function called hrtimer_callback().
Commit 07f25091ca02 ("can: m_can: Implement receive coalescing") uses the
hrtimer for software-supported IRQ coalescence, with the timer function
called m_can_coalescing_timer().
To improve the readability of the driver, rename hrtimer_callback() to
m_can_polling_timer(), which better describes the functionality.
Link: https://patch.msgid.link/20251008-m_can-cleanups-v1-2-1784a18eaa84@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Since commit eaacfeaca7ad ("can: m_can: Call the RAM init directly from
m_can_chip_config") m_can_init_ram() is not used outside of m_can.c.
Mark as static and remove the EXPORT_SYMBOL_GPL().
Link: https://patch.msgid.link/20251008-m_can-cleanups-v1-1-1784a18eaa84@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
TI AM62x SoC requires a wakeup flag being set in pinctrl when mcan pins
act as a wakeup source. Add support to select the wakeup state if WOL
is enabled.
Signed-off-by: Markus Schneider-Pargmann (TI.com) <msp@baylibre.com>
Link: https://patch.msgid.link/20251001-topic-mcan-wakeup-source-v6-12-v10-4-4ab508ac5d1e@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
We have more detailed error values available, return them in the core
driver and the calling drivers to return proper errors to callers.
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Kendall Willis <k-willis@ti.com>
Signed-off-by: Markus Schneider-Pargmann (TI.com) <msp@baylibre.com>
Link: https://patch.msgid.link/20251001-topic-mcan-wakeup-source-v6-12-v10-3-4ab508ac5d1e@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
In some devices the pins of the m_can module can act as a wakeup source.
This patch helps do that by connecting the PHY_WAKE WoL option to
device_set_wakeup_enable. By marking this device as being wakeup
enabled, this setting can be used by platform code to decide which
sleep or poweroff mode to use.
Also this prepares the driver for the next patch in which the pinctrl
settings are changed depending on the desired wakeup source.
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Kendall Willis <k-willis@ti.com>
Signed-off-by: Markus Schneider-Pargmann (TI.com) <msp@baylibre.com>
Link: https://patch.msgid.link/20251001-topic-mcan-wakeup-source-v6-12-v10-2-4ab508ac5d1e@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
can_change_mtu() became obsolete by commit 23049938605b ("can: populate the
minimum and maximum MTU values"). Now that net_device->min_mtu and
net_device->max_mtu are populated, all the checks are already done by
dev_validate_mtu() in net/core/dev.c.
Remove the net_device_ops->ndo_change_mtu() callback of all the physical
interfaces, then remove can_change_mtu(). Only keep the vcan_change_mtu()
and vxcan_change_mtu() because the virtual interfaces use their own
different MTU logic.
The only functional change this patch introduces is that now the user will
be able to change the MTU even if the interface is up. This does not matter
for Classical CAN and CAN FD because their MTU range is composed of only
one value, respectively CAN_MTU and CANFD_MTU. For the upcoming CAN XL, the
MTU will be configurable within the CANXL_MIN_MTU to CANXL_MAX_MTU range at
any time, even if the interface is up. This is consistent with the other
net protocols and does not contradict ISO 11898-1:2024 as having a
modifiable MTU is a kernel extension.
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20251003-remove-can_change_mtu-v1-1-337f8bc21181@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This patch has been split from the original series [1].
In some SoCs (observed on the STM32MP15) the M_CAN IP core keeps the CAN
state and CAN error counters over an internal reset cycle. The STM32MP15
SoC provides an external reset, which is shared between both M_CAN cores.
Add support for an optional external reset. Take care of shared resets,
de-assert reset during the probe phase in m_can_class_register() and while
the interface is up, assert the reset otherwise.
[1] https://lore.kernel.org/all/20250923-m_can-fix-state-handling-v3-0-06d8baccadbf@pengutronix.de
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://patch.msgid.link/20251008-m_can-add-reset-v1-1-49f0bbf820c4@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
On all platforms set_clock_selection() writes to a GRF register. This
requires certain clocks running and thus should happen before the
clocks are disabled.
This has been noticed on RK3576 Sige5, which hangs during system suspend
when trying to suspend the second network interface. Note, that
suspending the first interface works, because the second device ensures
that the necessary clocks for the GRF are enabled.
Cc: stable@vger.kernel.org
Fixes: 2f2b60a0ec28 ("net: ethernet: stmmac: dwmac-rk: Add gmac support for rk3588")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251014-rockchip-network-clock-fix-v1-1-c257b4afdf75@collabora.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sort #include preprocessor directives.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-15-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The arguments grew over time; follow conventions and apply reverse
christmas tree (RCT).
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-14-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Local variable `count` is useless: it counts number of DMA descriptors
used and returns it. But the return value is only checked for error.
Drop counting the number of DMA descriptors and return a usual
negative-if-error integer.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-13-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The pattern:
entry = macb_tx_ring_wrap(bp, i);
tx_skb = &queue->tx_skb[entry];
is the exact definition of:
macb_tx_skb(queue, i);
The pattern:
entry = macb_tx_ring_wrap(bp, i);
desc = macb_tx_desc(queue, entry);
is redundant because macb_tx_desc() calls macb_tx_ring_wrap().
One explicit call to macb_tx_ring_wrap() is still required for checking
if it is the last buffer (TX_WRAP case).
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-12-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Whenever min(a, b) is used with a and b unsigned variables or literals,
`make W=2` complains. Change four min() calls into umin().
stderr extract (GCC 11.2.0, MIPS Codescape):
./include/linux/minmax.h:68:57: warning: comparison is always true due
to limited range of data type [-Wtype-limits]
68 | #define __is_nonneg(ux) statically_true((long long)(ux) >= 0)
| ^~
drivers/net/ethernet/cadence/macb_main.c:2299:26: note: in expansion of
macro ‘min’
2299 | hdrlen = min(skb_headlen(skb), bp->max_tx_length);
| ^~~
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-11-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The low 16 bits of GEM_DCFG6 tell us which queues are enabled in HW. In
theory, there could be holes in the bitfield. In practice, the macb
driver would fail if there were holes as most loops iterate upon
bp->num_queues. Only macb_init() iterated correctly.
- Drop bp->queue_mask field.
- Error out at probe if a hole is in the queue mask.
- Rely upon bp->num_queues for iteration.
- As we drop the queue_mask probe local variable, fix RCT.
- Compute queue_mask on the fly for TAPRIO using bp->num_queues.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-10-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce macb_dma64() and macb_dma_ptp() helper functions.
Many codepaths are made simpler by dropping conditional compilation.
This implies two additional changes:
- Always compile related structure definitions inside <macb.h>.
- MACB_EXT_DESC can be dropped as it is useless now.
The common case:
#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
struct macb_dma_desc_64 *desc_64;
if (bp->hw_dma_cap & HW_DMA_CAP_64B) {
desc_64 = macb_64b_desc(bp, desc);
// ...
}
#endif
Is replaced by:
if (macb_dma64(bp)) {
struct macb_dma_desc_64 *desc_64 = macb_64b_desc(bp, desc);
// ...
}
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-9-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Drop bp->hw_dma_cap field and put its two flags into bp->caps.
On my specific config (eyeq5_defconfig), bloat-o-meter indicates:
- macb_main.o: Before=56251, After=56359, chg +0.19%
- macb_ptp.o: Before= 3976, After= 3952, chg -0.60%
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-8-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The function body uses a switch statement on bp->hw_dma_cap and handles
its four possible values: 0, is_64b, is_ptp, is_64b && is_ptp.
Instead, refactor by noticing that the return value is:
desc_size * MULT
with MULT = 3 if is_64b && is_ptp,
2 if is_64b || is_ptp,
1 otherwise.
MULT can be expressed as:
1 + is_64b + is_ptp
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-7-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
macb_dma_desc_get_size() does a switch on bp->hw_dma_cap and covers all
four cases: 0, 64B, PTP, 64B+PTP. It also covers the #ifndef
MACB_EXT_DESC separately, making it four codepaths.
Instead, notice the descriptor size grows with enabled features and use
plain if-statements on 64B and PTP flags.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-6-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove NULL checks on macb_config as it is always valid:
- either it is its default value &default_gem_config,
- or it got overridden using match data.
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-5-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove local variables clk_init and init. Those function pointers are
always equivalent to macb_config->clk_init and macb_config->init.
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-4-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MACB_CAPS_* are bit constants that get used in bp->caps. They occupy
bits 0..12 + 24..31. Remove 11..23 gap by moving bits 24..31 to 13..20.
Occupation bitfields:
31 29 27 25 23 21 19 17 15 13 11 09 07 05 03 01
30 28 26 24 22 20 18 16 14 12 10 08 06 04 02 00
-- Before ------------------------------------------------------
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
0 0 0 0 0 0 0 0 0 0 0
-- After -------------------------------------------------------
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
0 0 0 0 0 0 0 0 0 0 0
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-3-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace all capabilities values by calls to the BIT() macro.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251014-macb-cleanup-v1-2-31cd266e22cd@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add Ethernet controller support for Eswin's eic7700 SoC. The driver
implements hardware initialization, clock configuration, delay
adjustment functions based on DWC Ethernet controller, and supports
device tree configuration and platform driver integration.
Signed-off-by: Zhi Li <lizhi2@eswincomputing.com>
Signed-off-by: Shangjuan Wei <weishangjuan@eswincomputing.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251015114101.1218-1-weishangjuan@eswincomputing.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
stmmac_phy_setup() does not set up any PHY, but does setup phylink.
Rename this function to stmmac_phylink_setup() to reflect more what
it is doing.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1v945d-0000000Ameh-3Bs7@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To make future changes easier, rearrange the use of dma_cap->l3l4fnum
vs priv->flow_entries_max.
Always initialise priv->flow_entries_max from dma_cap->l3l4fnum, then
use priv->flow_entries_max to determine whether we allocate
priv->flow_entries and set it up.
This change is safe because tc_init() is only called once from
stmmac_dvr_probe().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1v945Y-0000000Ameb-2gDI@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is no need to do the speed-down, speed-up dance when changing
the MTU as there is little power saving that can be gained from such
a brief interval between these, and the autonegotiation they cause
takes much longer.
Move the calls to phylink_speed_up() and phylink_speed_down() into
stmmac_open() and stmmac_release() respectively, reducing the work
done in the __-variants of these functions.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1v945T-0000000AmeV-2BvU@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Place the .mac_finish() initialiser and implementation after the
.mac_config() initialiser and method which reflects the order that
they appear in struct phylink_mac_ops, and the order in which they
are called. This keeps logically similar code together.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1v945O-0000000AmeP-1k0t@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rather than dwc-qos-eth manipulating the MDIO bus lock directly, add
helpers to the stmmac MDIO layer and use them in dwc-qos-eth. This
improves my commit 87f43e6f06a2 ("net: stmmac: dwc-qos: calibrate tegra
with mdio bus idle").
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1v945J-0000000AmeJ-1GOb@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In cgx_probe() when pci_alloc_irq_vectors() fails the error value will
be negative and that check is sufficient.
err = pci_alloc_irq_vectors(pdev, nvec, nvec, PCI_IRQ_MSIX);
if (err < 0 || err != nvec) {
...
}
When pci_alloc_irq_vectors() fail to allocate nvec number of vectors,
-ENOSPC is returned, so it would be safe to remove the check that
compares err with nvec.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251015090117.1557870-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
