| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit 63e72e551942642c48456a4134975136cdcb9b3c ]
In the error handling for this function, d is freed without ever
removing it from intc_list which would lead to a use after free.
To fix this, let's only add it to the list after everything has
succeeded.
Fixes: 2dcec7a988a1 ("sh: intc: set_irq_wake() support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bcddf52b7a17adcebc768d26f4e27cf79adb424c ]
Since commit 4c39529663b9 ("slab: Warn on duplicate cache names when
DEBUG_VM=y"), the duplicate slab cache names can be detected and a
kernel WARNING is thrown out.
In UBI fast attaching process, alloc_ai() could be invoked twice
with the same slab cache name 'ubi_aeb_slab_cache', which will trigger
following warning messages:
kmem_cache of name 'ubi_aeb_slab_cache' already exists
WARNING: CPU: 0 PID: 7519 at mm/slab_common.c:107
__kmem_cache_create_args+0x100/0x5f0
Modules linked in: ubi(+) nandsim [last unloaded: nandsim]
CPU: 0 UID: 0 PID: 7519 Comm: modprobe Tainted: G 6.12.0-rc2
RIP: 0010:__kmem_cache_create_args+0x100/0x5f0
Call Trace:
__kmem_cache_create_args+0x100/0x5f0
alloc_ai+0x295/0x3f0 [ubi]
ubi_attach+0x3c3/0xcc0 [ubi]
ubi_attach_mtd_dev+0x17cf/0x3fa0 [ubi]
ubi_init+0x3fb/0x800 [ubi]
do_init_module+0x265/0x7d0
__x64_sys_finit_module+0x7a/0xc0
The problem could be easily reproduced by loading UBI device by fastmap
with CONFIG_DEBUG_VM=y.
Fix it by using different slab names for alloc_ai() callers.
Fixes: d2158f69a7d4 ("UBI: Remove alloc_ai() slab name from parameter list")
Fixes: fdf10ed710c0 ("ubi: Rework Fastmap attach base code")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e8ba8a2bc4f60a1065f23d6a0e7cbea945a0f40d ]
If the __rtc_read_time call fails,, the struct rtc_time tm; may contain
uninitialized data, or an illegal date/time read from the RTC hardware.
When calling rtc_tm_to_ktime later, the result may be a very large value
(possibly KTIME_MAX). If there are periodic timers in rtc->timerqueue,
they will continually expire, may causing kernel softlockup.
Fixes: 6610e0893b8b ("RTC: Rework RTC code to use timerqueue for events")
Signed-off-by: Yongliang Gao <leonylgao@tencent.com>
Acked-by: Jingqun Li <jingqunli@tencent.com>
Link: https://lore.kernel.org/r/20241011043153.3788112-1-leonylgao@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 7a68f9fa97357a0f2073c9c31ed4101da4fce93e upstream.
As support for splitting transmission over several messages using
TX_DATA_CONT was introduced it does not immediately return the return
value of qcom_glink_tx().
The result is that in the intentless case (i.e. intent == NULL), the
code will continue to send all additional chunks. This is wasteful, and
it's possible that the send operation could incorrectly indicate
success, if the last chunk fits in the TX fifo.
Fix the condition.
Fixes: 8956927faed3 ("rpmsg: glink: Add TX_DATA_CONT command while sending")
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230418163018.785524-2-quic_bjorande@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 02a6982b0ccfcdc39e20016f5fc9a1b7826a6ee7 upstream.
The check whether the TRB ring is full or empty in dwc3_calc_trbs_left()
is insufficient. It assumes there are active TRBs if there's any request
in the started_list. However, that's not the case for requests with a
large SG list.
That is, if we have a single usb request that requires more TRBs than
the total TRBs in the TRB ring, the queued TRBs will be available when
all the TRBs in the ring are completed. But the request is only
partially completed and remains in the started_list. With the current
logic, the TRB ring is empty, but dwc3_calc_trbs_left() returns 0.
Fix this by additionally checking for the request->num_trbs for active
TRB count.
Cc: stable@vger.kernel.org
Fixes: 51f1954ad853 ("usb: dwc3: gadget: Fix dwc3_calc_trbs_left()")
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/708dc62b56b77da1f704cc2ae9b6ddb1f2dbef1f.1731545781.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ca59f9956d4519ab18ab2270be47c6b8c6ced091 upstream.
Atomicity violation occurs when the fmc_send_cmd() function is executed
simultaneously with the modification of the fmdev->resp_skb value.
Consider a scenario where, after passing the validity check within the
function, a non-null fmdev->resp_skb variable is assigned a null value.
This results in an invalid fmdev->resp_skb variable passing the validity
check. As seen in the later part of the function, skb = fmdev->resp_skb;
when the invalid fmdev->resp_skb passes the check, a null pointer
dereference error may occur at line 478, evt_hdr = (void *)skb->data;
To address this issue, it is recommended to include the validity check of
fmdev->resp_skb within the locked section of the function. This
modification ensures that the value of fmdev->resp_skb does not change
during the validation process, thereby maintaining its validity.
This possible bug is found by an experimental static analysis tool
developed by our team. This tool analyzes the locking APIs
to extract function pairs that can be concurrently executed, and then
analyzes the instructions in the paired functions to identify possible
concurrency bugs including data races and atomicity violations.
Fixes: e8454ff7b9a4 ("[media] drivers:media:radio: wl128x: FM Driver Common sources")
Cc: stable@vger.kernel.org
Signed-off-by: Qiu-ji Chen <chenqiuji666@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 49a397ad24ee5e2c53a59dada2780d7e71bd3f77 upstream.
The tilt data contained in the Bluetooth packets of an Intuos Pro are
supposed to be interpreted as signed values. Simply casting the values
to type `char` is not guaranteed to work since it is implementation-
defined whether it is signed or unsigned. At least one user has noticed
the data being reported incorrectly on their system. To ensure that the
data is interpreted properly, we specifically cast to `signed char`
instead.
Link: https://github.com/linuxwacom/input-wacom/issues/445
Fixes: 4922cd26f03c ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface")
CC: stable@vger.kernel.org # 4.11+
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bcc7ba668818dcadd2f1db66b39ed860a63ecf97 upstream.
Currently in omap_8250_shutdown, the dma->rx_running flag is
set to zero in omap_8250_rx_dma_flush. Next pm_runtime_get_sync
is called, which is a runtime resume call stack which can
re-set the flag. When the call omap_8250_shutdown returns, the
flag is expected to be UN-SET, but this is not the case. This
is causing issues the next time UART is re-opened and
omap_8250_rx_dma is called. Fix by moving pm_runtime_get_sync
before the omap_8250_rx_dma_flush.
cc: stable@vger.kernel.org
Fixes: 0e31c8d173ab ("tty: serial: 8250_omap: add custom DMA-RX callback")
Signed-off-by: Bin Liu <b-liu@ti.com>
[Judith: Add commit message]
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20241031172315.453750-1-jm@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d610020f030bec819f42de327c2bd5437d2766b3 upstream.
During wear-leveing work, the source PEB will be moved into scrub list
when source LEB cannot be locked in ubi_eba_copy_leb(), which is wrong
for non-scrub type source PEB. The problem could bring extra and
ineffective wear-leveing jobs, which makes more or less negative effects
for the life time of flash. Specifically, the process is divided 2 steps:
1. wear_leveling_worker // generate false scrub type PEB
ubi_eba_copy_leb // MOVE_RETRY is returned
leb_write_trylock // trylock failed
scrubbing = 1;
e1 is put into ubi->scrub
2. wear_leveling_worker // schedule false scrub type PEB for wl
scrubbing = 1
e1 = rb_entry(rb_first(&ubi->scrub))
The problem can be reproduced easily by running fsstress on a small
UBIFS partition(<64M, simulated by nandsim) for 5~10mins
(CONFIG_MTD_UBI_FASTMAP=y,CONFIG_MTD_UBI_WL_THRESHOLD=50). Following
message is shown:
ubi0: scrubbed PEB 66 (LEB 0:10), data moved to PEB 165
Since scrub type source PEB has set variable scrubbing as '1', and
variable scrubbing is checked before variable keep, so the problem can
be fixed by setting keep variable as 1 directly if the source LEB cannot
be locked.
Fixes: e801e128b220 ("UBI: fix missing scrub when there is a bit-flip")
CC: stable@vger.kernel.org
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d24cfee7f63d6b44d45a67c5662bd1cc48e8b3ca upstream.
When probing spi device take care of deferred probe of ACPI irq gpio
similar like for OF/DT case.
>From practical standpoint this fixes issue with vsc-tp driver on
Dell XP 9340 laptop, which try to request interrupt with spi->irq
equal to -EPROBE_DEFER and fail to probe with the following error:
vsc-tp spi-INTC10D0:00: probe with driver vsc-tp failed with error -22
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Fixes: 33ada67da352 ("ACPI / spi: attach GPIO IRQ from ACPI description to SPI device")
Cc: stable@vger.kernel.org
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Alexis Lothoré <alexis.lothore@bootlin.com> # Dell XPS9320, ov01a10
Link: https://patch.msgid.link/20241122094224.226773-1-stanislaw.gruszka@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 718632467d88e98816fa01ab12681ef1c2aa56f8 upstream.
This reverts commit 3791ea69a4858b81e0277f695ca40f5aae40f312.
It was reported to cause boot-time issues, so revert it for now.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: 3791ea69a485 ("serial: sh-sci: Clean sci_ports[0] after at earlycon exit")
Cc: stable <stable@kernel.org>
Cc: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3791ea69a4858b81e0277f695ca40f5aae40f312 upstream.
The early_console_setup() function initializes the sci_ports[0].port with
an object of type struct uart_port obtained from the object of type
struct earlycon_device received as argument by the early_console_setup().
It may happen that later, when the rest of the serial ports are probed,
the serial port that was used as earlycon (e.g., port A) to be mapped to a
different position in sci_ports[] and the slot 0 to be used by a different
serial port (e.g., port B), as follows:
sci_ports[0] = port A
sci_ports[X] = port B
In this case, the new port mapped at index zero will have associated data
that was used for earlycon.
In case this happens, after Linux boot, any access to the serial port that
maps on sci_ports[0] (port A) will block the serial port that was used as
earlycon (port B).
To fix this, add early_console_exit() that clean the sci_ports[0] at
earlycon exit time.
Fixes: 0b0cced19ab1 ("serial: sh-sci: Add CONFIG_SERIAL_EARLYCON support")
Cc: stable@vger.kernel.org
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20241106120118.1719888-4-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 51cdd69d6a857f527d6d0697a2e1f0fa8bca1005 upstream.
This reverts commit ec6ce7075ef879b91a8710829016005dc8170f17.
Fix installation of WinUSB driver using OS descriptors. Without the
fix the drivers are not installed correctly and the property
'DeviceInterfaceGUID' is missing on host side.
The original change was based on the assumption that the interface
number is in the high byte of wValue but it is in the low byte,
instead. Unfortunately, the fix is based on MS documentation which is
also wrong.
The actual USB request for OS descriptors (using USB analyzer) looks
like:
Offset 0 1 2 3 4 5 6 7
0x000 C1 A1 02 00 05 00 0A 00
C1: bmRequestType (device to host, vendor, interface)
A1: nas magic number
0002: wValue (2: nas interface)
0005: wIndex (5: get extended property i.e. nas interface GUID)
008E: wLength (142)
The fix was tested on Windows 10 and Windows 11.
Cc: stable@vger.kernel.org
Fixes: ec6ce7075ef8 ("usb: gadget: composite: fix OS descriptors w_value logic")
Signed-off-by: Michal Vrastil <michal.vrastil@hidglobal.com>
Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com>
Acked-by: Peter korsgaard <peter@korsgaard.com>
Link: https://lore.kernel.org/r/20241113235433.20244-1-quic_eserrao@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 635a9fca54f4f4148be1ae1c7c6bd37af80f5773 upstream.
Commit 7c0cca7c847e ("tty: ldisc: add sysctl to prevent autoloading of
ldiscs") introduces the tty_ldisc_autoload sysctl with the wrong
proc_handler. .extra1 and .extra2 parameters are set to avoid other values
thant SYSCTL_ZERO or SYSCTL_ONE to be set but proc_dointvec do not uses
them.
This commit fixes this by using proc_dointvec_minmax instead of
proc_dointvec.
Fixes: 7c0cca7c847e ("tty: ldisc: add sysctl to prevent autoloading of ldiscs")
Cc: stable <stable@kernel.org>
Signed-off-by: Nicolas Bouchinet <nicolas.bouchinet@ssi.gouv.fr>
Reviewed-by: Lin Feng <linf@wangsu.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20241112131357.49582-4-nicolas.bouchinet@clip-os.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c7acef99642b763ba585f4a43af999fcdbcc3dc4 upstream.
Dennis reports a boot crash on recent Lenovo laptops with a USB4 dock.
Since commit 0fc70886569c ("thunderbolt: Reset USB4 v2 host router") and
commit 59a54c5f3dbd ("thunderbolt: Reset topology created by the boot
firmware"), USB4 v2 and v1 Host Routers are reset on probe of the
thunderbolt driver.
The reset clears the Presence Detect State and Data Link Layer Link Active
bits at the USB4 Host Router's Root Port and thus causes hot removal of the
dock.
The crash occurs when pciehp is unbound from one of the dock's Downstream
Ports: pciehp creates a pci_slot on bind and destroys it on unbind. The
pci_slot contains a pointer to the pci_bus below the Downstream Port, but
a reference on that pci_bus is never acquired. The pci_bus is destroyed
before the pci_slot, so a use-after-free ensues when pci_slot_release()
accesses slot->bus.
In principle this should not happen because pci_stop_bus_device() unbinds
pciehp (and therefore destroys the pci_slot) before the pci_bus is
destroyed by pci_remove_bus_device().
However the stacktrace provided by Dennis shows that pciehp is unbound from
pci_remove_bus_device() instead of pci_stop_bus_device(). To understand
the significance of this, one needs to know that the PCI core uses a two
step process to remove a portion of the hierarchy: It first unbinds all
drivers in the sub-hierarchy in pci_stop_bus_device() and then actually
removes the devices in pci_remove_bus_device(). There is no precaution to
prevent driver binding in-between pci_stop_bus_device() and
pci_remove_bus_device().
In Dennis' case, it seems removal of the hierarchy by pciehp races with
driver binding by pci_bus_add_devices(). pciehp is bound to the
Downstream Port after pci_stop_bus_device() has run, so it is unbound by
pci_remove_bus_device() instead of pci_stop_bus_device(). Because the
pci_bus has already been destroyed at that point, accesses to it result in
a use-after-free.
One might conclude that driver binding needs to be prevented after
pci_stop_bus_device() has run. However it seems risky that pci_slot points
to pci_bus without holding a reference. Solely relying on correct ordering
of driver unbind versus pci_bus destruction is certainly not defensive
programming.
If pci_slot has a need to access data in pci_bus, it ought to acquire a
reference. Amend pci_create_slot() accordingly. Dennis reports that the
crash is not reproducible with this change.
Abridged stacktrace:
pcieport 0000:00:07.0: PME: Signaling with IRQ 156
pcieport 0000:00:07.0: pciehp: Slot #12 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
pci_bus 0000:20: dev 00, created physical slot 12
pcieport 0000:00:07.0: pciehp: Slot(12): Card not present
...
pcieport 0000:21:02.0: pciehp: pcie_disable_notification: SLOTCTRL d8 write cmd 0
Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] PREEMPT SMP NOPTI
CPU: 13 UID: 0 PID: 134 Comm: irq/156-pciehp Not tainted 6.11.0-devel+ #1
RIP: 0010:dev_driver_string+0x12/0x40
pci_destroy_slot
pciehp_remove
pcie_port_remove_service
device_release_driver_internal
bus_remove_device
device_del
device_unregister
remove_iter
device_for_each_child
pcie_portdrv_remove
pci_device_remove
device_release_driver_internal
bus_remove_device
device_del
pci_remove_bus_device (recursive invocation)
pci_remove_bus_device
pciehp_unconfigure_device
pciehp_disable_slot
pciehp_handle_presence_or_link_change
pciehp_ist
Link: https://lore.kernel.org/r/4bfd4c0e976c1776cd08e76603903b338cf25729.1728579288.git.lukas@wunner.de
Reported-by: Dennis Wassenberg <Dennis.Wassenberg@secunet.com>
Closes: https://lore.kernel.org/r/6de4b45ff2b32dd91a805ec02ec8ec73ef411bf6.camel@secunet.com/
Tested-by: Dennis Wassenberg <Dennis.Wassenberg@secunet.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 40c974826734836402abfd44efbf04f63a2cc1c1 upstream.
If the clock sehci->clk was not enabled in spear_ehci_hcd_drv_probe,
it should not be disabled in any path.
Conversely, if it was enabled in spear_ehci_hcd_drv_probe, it must be disabled
in all error paths to ensure proper cleanup.
Found by Linux Verification Center (linuxtesting.org) with Klever.
Fixes: 7675d6ba436f ("USB: EHCI: make ehci-spear a separate driver")
Cc: stable@vger.kernel.org
Signed-off-by: Vitalii Mordan <mordan@ispras.ru>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20241114230310.432213-1-mordan@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 3c5d8b819d27012264edd17e6ae7fffda382fe44 ]
The pm_runtime_disable() is missing in probe error path,
so add it to fix it.
Fixes: 92b1f84d46b2 ("drivers/misc: driver for APDS990X ALS and proximity sensors")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20240923035556.3009105-1-ruanjinjie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d73dc7b182be4238b75278bfae16afb4c5564a58 ]
[Syzbot reported two possible deadlocks]
The first possible deadlock is:
WARNING: possible recursive locking detected
6.12.0-rc1-syzkaller-00027-g4a9fe2a8ac53 #0 Not tainted
--------------------------------------------
syz-executor363/2651 is trying to acquire lock:
ffffffff89b120e8 (chaoskey_list_lock){+.+.}-{3:3}, at: chaoskey_release+0x15d/0x2c0 drivers/usb/misc/chaoskey.c:322
but task is already holding lock:
ffffffff89b120e8 (chaoskey_list_lock){+.+.}-{3:3}, at: chaoskey_release+0x7f/0x2c0 drivers/usb/misc/chaoskey.c:299
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(chaoskey_list_lock);
lock(chaoskey_list_lock);
*** DEADLOCK ***
The second possible deadlock is:
WARNING: possible circular locking dependency detected
6.12.0-rc1-syzkaller-00027-g4a9fe2a8ac53 #0 Not tainted
------------------------------------------------------
kworker/0:2/804 is trying to acquire lock:
ffffffff899dadb0 (minor_rwsem){++++}-{3:3}, at: usb_deregister_dev+0x7c/0x1e0 drivers/usb/core/file.c:186
but task is already holding lock:
ffffffff89b120e8 (chaoskey_list_lock){+.+.}-{3:3}, at: chaoskey_disconnect+0xa8/0x2a0 drivers/usb/misc/chaoskey.c:235
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (chaoskey_list_lock){+.+.}-{3:3}:
__mutex_lock_common kernel/locking/mutex.c:608 [inline]
__mutex_lock+0x175/0x9c0 kernel/locking/mutex.c:752
chaoskey_open+0xdd/0x220 drivers/usb/misc/chaoskey.c:274
usb_open+0x186/0x220 drivers/usb/core/file.c:47
chrdev_open+0x237/0x6a0 fs/char_dev.c:414
do_dentry_open+0x6cb/0x1390 fs/open.c:958
vfs_open+0x82/0x3f0 fs/open.c:1088
do_open fs/namei.c:3774 [inline]
path_openat+0x1e6a/0x2d60 fs/namei.c:3933
do_filp_open+0x1dc/0x430 fs/namei.c:3960
do_sys_openat2+0x17a/0x1e0 fs/open.c:1415
do_sys_open fs/open.c:1430 [inline]
__do_sys_openat fs/open.c:1446 [inline]
__se_sys_openat fs/open.c:1441 [inline]
__x64_sys_openat+0x175/0x210 fs/open.c:1441
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
-> #0 (minor_rwsem){++++}-{3:3}:
check_prev_add kernel/locking/lockdep.c:3161 [inline]
check_prevs_add kernel/locking/lockdep.c:3280 [inline]
validate_chain kernel/locking/lockdep.c:3904 [inline]
__lock_acquire+0x250b/0x3ce0 kernel/locking/lockdep.c:5202
lock_acquire.part.0+0x11b/0x380 kernel/locking/lockdep.c:5825
down_write+0x93/0x200 kernel/locking/rwsem.c:1577
usb_deregister_dev+0x7c/0x1e0 drivers/usb/core/file.c:186
chaoskey_disconnect+0xb7/0x2a0 drivers/usb/misc/chaoskey.c:236
usb_unbind_interface+0x1e8/0x970 drivers/usb/core/driver.c:461
device_remove drivers/base/dd.c:569 [inline]
device_remove+0x122/0x170 drivers/base/dd.c:561
__device_release_driver drivers/base/dd.c:1273 [inline]
device_release_driver_internal+0x44a/0x610 drivers/base/dd.c:1296
bus_remove_device+0x22f/0x420 drivers/base/bus.c:576
device_del+0x396/0x9f0 drivers/base/core.c:3864
usb_disable_device+0x36c/0x7f0 drivers/usb/core/message.c:1418
usb_disconnect+0x2e1/0x920 drivers/usb/core/hub.c:2304
hub_port_connect drivers/usb/core/hub.c:5361 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5661 [inline]
port_event drivers/usb/core/hub.c:5821 [inline]
hub_event+0x1bed/0x4f40 drivers/usb/core/hub.c:5903
process_one_work+0x9c5/0x1ba0 kernel/workqueue.c:3229
process_scheduled_works kernel/workqueue.c:3310 [inline]
worker_thread+0x6c8/0xf00 kernel/workqueue.c:3391
kthread+0x2c1/0x3a0 kernel/kthread.c:389
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(chaoskey_list_lock);
lock(minor_rwsem);
lock(chaoskey_list_lock);
lock(minor_rwsem);
*** DEADLOCK ***
[Analysis]
The first is AA lock, it because wrong logic, it need a unlock.
The second is AB lock, it needs to rearrange the order of lock usage.
Fixes: 422dc0a4d12d ("USB: chaoskey: fail open after removal")
Reported-by: syzbot+685e14d04fe35692d3bc@syzkaller.appspotmail.com
Reported-by: syzbot+1f8ca5ee82576ec01f12@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=685e14d04fe35692d3bc
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Tested-by: syzbot+685e14d04fe35692d3bc@syzkaller.appspotmail.com
Reported-by: syzbot+5f1ce62e956b7b19610e@syzkaller.appspotmail.com
Tested-by: syzbot+5f1ce62e956b7b19610e@syzkaller.appspotmail.com
Tested-by: syzbot+1f8ca5ee82576ec01f12@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/tencent_84EB865C89862EC22EE94CB3A7C706C59206@qq.com
Cc: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 422dc0a4d12d0b80dd3aab3fe5943f665ba8f041 ]
chaoskey_open() takes the lock only to increase the
counter of openings. That means that the mutual exclusion
with chaoskey_disconnect() cannot prevent an increase
of the counter and chaoskey_open() returning a success.
If that race is hit, chaoskey_disconnect() will happily
free all resources associated with the device after
it has dropped the lock, as it has read the counter
as zero.
To prevent this race chaoskey_open() has to check
the presence of the device under the lock.
However, the current per device lock cannot be used,
because it is a part of the data structure to be
freed. Hence an additional global mutex is needed.
The issue is as old as the driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reported-by: syzbot+422188bce66e76020e55@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=422188bce66e76020e55
Fixes: 66e3e591891da ("usb: Add driver for Altus Metrum ChaosKey device (v2)")
Rule: add
Link: https://lore.kernel.org/stable/20241002132201.552578-1-oneukum%40suse.com
Link: https://lore.kernel.org/r/20241002132201.552578-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 44feafbaa66ec86232b123bb8437a6a262442025 ]
iowarrior_read() uses the iowarrior dev structure, but does not use any
lock on the structure. This can cause various bugs including data-races,
so it is more appropriate to use a mutex lock to safely protect the
iowarrior dev structure. When using a mutex lock, you should split the
branch to prevent blocking when the O_NONBLOCK flag is set.
In addition, it is unnecessary to check for NULL on the iowarrior dev
structure obtained by reading file->private_data. Therefore, it is
better to remove the check.
Fixes: 946b960d13c1 ("USB: add driver for iowarrior devices.")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Link: https://lore.kernel.org/r/20240919103403.3986-1-aha310510@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 407618d66dba55e7db1278872e8be106808bbe91 ]
On DWMAC3 and later, there's a RX Watchdog interrupt that's used for
interrupt coalescing. It's known to be buggy on some platforms, and
dwmac-socfpga appears to be one of them. Changing the interrupt
coalescing from ethtool doesn't appear to have any effect here.
Without disabling RIWT (Received Interrupt Watchdog Timer, I
believe...), we observe latencies while receiving traffic that amount to
around ~0.4ms. This was discovered with NTP but can be easily reproduced
with a simple ping. Without this patch :
64 bytes from 192.168.5.2: icmp_seq=1 ttl=64 time=0.657 ms
With this patch :
64 bytes from 192.168.5.2: icmp_seq=1 ttl=64 time=0.254 ms
Fixes: 801d233b7302 ("net: stmmac: Add SOCFPGA glue driver")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20241122141256.764578-1-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b032ae57d4fe2b2445e3bc190db6fcaa8c102f68 ]
If the clock pep->clk was not enabled in pxa168_eth_probe,
it should not be disabled in any path.
Conversely, if it was enabled in pxa168_eth_probe, it must be disabled
in all error paths to ensure proper cleanup.
Use the devm_clk_get_enabled helper function to ensure proper call balance
for pep->clk.
Found by Linux Verification Center (linuxtesting.org) with Klever.
Fixes: a49f37eed22b ("net: add Fast Ethernet driver for PXA168.")
Signed-off-by: Vitalii Mordan <mordan@ispras.ru>
Link: https://patch.msgid.link/20241121200658.2203871-1-mordan@ispras.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e863ff806f72098bccaf8fa89c80d9ad6187c3b0 ]
Validate Wake-on-LAN (WoL) options in `lan78xx_set_wol` before calling
`usb_autopm_get_interface`. This prevents USB autopm refcounting issues
and ensures the adapter can properly enter autosuspend when invalid WoL
options are provided.
Fixes: eb9ad088f966 ("lan78xx: Check for supported Wake-on-LAN modes")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://patch.msgid.link/20241118140351.2398166-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 614f4d166eeeb9bd709b0ad29552f691c0f45776 ]
The hardware on Broadcom 1G chipsets have a known limitation
where they cannot handle DMA addresses that cross over 4GB.
When such an address is encountered, the hardware sets the
address overflow error bit in the DMA status register and
triggers a reset.
However, BCM57766 hardware is setting the overflow bit and
triggering a reset in some cases when there is no actual
underlying address overflow. The hardware team analyzed the
issue and concluded that it is happening when the status
block update has an address with higher (b16 to b31) bits
as 0xffff following a previous update that had lowest bits
as 0xffff.
To work around this bug in the BCM57766 hardware, set the
coherent dma mask from the current 64b to 31b. This will
ensure that upper bits of the status block DMA address are
always at most 0x7fff, thus avoiding the improper overflow
check described above. This work around is intended for only
status block and ring memories and has no effect on TX and
RX buffers as they do not require coherent memory.
Fixes: 72f2afb8a685 ("[TG3]: Add DMA address workaround")
Reported-by: Salam Noureddine <noureddine@arista.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://patch.msgid.link/20241119055741.147144-1-pavan.chebbi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ae7370e61c5d8f5bcefc2d4fca724bd4e9bbf789 ]
Add calls to `phy_device_free` after `fixed_phy_unregister` to fix a
memory leak that occurs when the device is unplugged. This ensures
proper cleanup of pseudo fixed-link PHYs.
Fixes: 89b36fb5e532 ("lan78xx: Lan7801 Support for Fixed PHY")
Cc: Raghuram Chary J <raghuramchary.jallipalli@microchip.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20241116130558.1352230-2-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f6da4553ff24a5d1c959c9627c965323adc3d307 ]
The put_device() call in power_supply_put() may call
power_supply_dev_release(). The latter function does not sleep so
power_supply_put() doesn't sleep either. Hence, remove the might_sleep()
call from power_supply_put(). This patch suppresses false positive
complaints about calling a sleeping function from atomic context if
power_supply_put() is called from atomic context.
Cc: Kyle Tso <kyletso@google.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Fixes: 1a352462b537 ("power_supply: Add power_supply_put for decrementing device reference counter")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240917193914.47566-1-bvanassche@acm.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fe4bf8d0b6716a423b16495d55b35d3fe515905d ]
There are cases where a PCIe extended capability should be hidden from
the user. For example, an unknown capability (i.e., capability with ID
greater than PCI_EXT_CAP_ID_MAX) or a capability that is intentionally
chosen to be hidden from the user.
Hiding a capability is done by virtualizing and modifying the 'Next
Capability Offset' field of the previous capability so it points to the
capability after the one that should be hidden.
The special case where the first capability in the list should be hidden
is handled differently because there is no previous capability that can
be modified. In this case, the capability ID and version are zeroed
while leaving the next pointer intact. This hides the capability and
leaves an anchor for the rest of the capability list.
However, today, hiding the first capability in the list is not done
properly if the capability is unknown, as struct
vfio_pci_core_device->pci_config_map is set to the capability ID during
initialization but the capability ID is not properly checked later when
used in vfio_config_do_rw(). This leads to the following warning [1] and
to an out-of-bounds access to ecap_perms array.
Fix it by checking cap_id in vfio_config_do_rw(), and if it is greater
than PCI_EXT_CAP_ID_MAX, use an alternative struct perm_bits for direct
read only access instead of the ecap_perms array.
Note that this is safe since the above is the only case where cap_id can
exceed PCI_EXT_CAP_ID_MAX (except for the special capabilities, which
are already checked before).
[1]
WARNING: CPU: 118 PID: 5329 at drivers/vfio/pci/vfio_pci_config.c:1900 vfio_pci_config_rw+0x395/0x430 [vfio_pci_core]
CPU: 118 UID: 0 PID: 5329 Comm: simx-qemu-syste Not tainted 6.12.0+ #1
(snip)
Call Trace:
<TASK>
? show_regs+0x69/0x80
? __warn+0x8d/0x140
? vfio_pci_config_rw+0x395/0x430 [vfio_pci_core]
? report_bug+0x18f/0x1a0
? handle_bug+0x63/0xa0
? exc_invalid_op+0x19/0x70
? asm_exc_invalid_op+0x1b/0x20
? vfio_pci_config_rw+0x395/0x430 [vfio_pci_core]
? vfio_pci_config_rw+0x244/0x430 [vfio_pci_core]
vfio_pci_rw+0x101/0x1b0 [vfio_pci_core]
vfio_pci_core_read+0x1d/0x30 [vfio_pci_core]
vfio_device_fops_read+0x27/0x40 [vfio]
vfs_read+0xbd/0x340
? vfio_device_fops_unl_ioctl+0xbb/0x740 [vfio]
? __rseq_handle_notify_resume+0xa4/0x4b0
__x64_sys_pread64+0x96/0xc0
x64_sys_call+0x1c3d/0x20d0
do_syscall_64+0x4d/0x120
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: 89e1f7d4c66d ("vfio: Add PCI device driver")
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20241124142739.21698-1-avihaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 06c59d97f63c1b8af521fa5aef8a716fb988b285 ]
The name len field of the CMD_OPEN packet is only 16-bits and the upper
16-bits of "param2" are a different "prio" field, which can be nonzero in
certain situations, and CMD_OPEN packets can be unexpectedly dropped
because of this.
Fix this by masking out the upper 16 bits of param2.
Fixes: b4f8e52b89f6 ("rpmsg: Introduce Qualcomm RPM glink driver")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241007235935.6216-1-jonathan@marek.ca
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4e816d0318fdfe8932da80dbf04ba318b13e4b3a ]
The upstream GLINK driver was first introduced to communicate with the
RPM on MSM8996, presumably as an artifact from that era the command
defines was prefixed RPM_CMD, while they actually are GLINK_CMDs.
Let's rename these, to keep things tidy. No functional change.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230214225933.2025595-1-quic_bjorande@quicinc.com
Stable-dep-of: 06c59d97f63c ("rpmsg: glink: use only lower 16-bits of param2 for CMD_OPEN name length")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b16a37e1846c9573a847a56fa2f31ba833dae45a ]
The current design sleeps unconditionally in TX FIFO full case and
wakeup only after sleep timer expires which adds random delays in
clients TX path.
Avoid sleep and use READ_NOTIFY command so that writer can be woken up
when remote notifies about read completion by sending IRQ.
Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1596086296-28529-7-git-send-email-deesin@codeaurora.org
Stable-dep-of: 06c59d97f63c ("rpmsg: glink: use only lower 16-bits of param2 for CMD_OPEN name length")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8956927faed366b60b0355f4a4317a10e281ced7 ]
With current design the transport can send packets of size upto
FIFO_SIZE which is 16k and return failure for all packets above 16k.
Add TX_DATA_CONT command to send packets greater than 16k by splitting
into 8K chunks.
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1596086296-28529-4-git-send-email-deesin@codeaurora.org
Stable-dep-of: 06c59d97f63c ("rpmsg: glink: use only lower 16-bits of param2 for CMD_OPEN name length")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e2226dbc4a4919d9c8bd9293299b532090bdf020 ]
Code in and related to PCI_RefinedAccessConfig() has three types of return
type confusion:
- PCI_RefinedAccessConfig() tests pci_bus_read_config_dword() return value
against -1.
- PCI_RefinedAccessConfig() returns both -1 and PCIBIOS_* return codes.
- Callers of PCI_RefinedAccessConfig() only test for -1.
Make PCI_RefinedAccessConfig() return PCIBIOS_* codes consistently and
adapt callers accordingly.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/r/20241022091140.3504-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a18a025c2fb5fbf2d1d0606ea0d7441ac90e9c39 ]
When config pci_ops.read() can detect failed PCI transactions, the data
returned to the CPU is PCI_ERROR_RESPONSE (~0 or 0xffffffff).
Obviously a successful PCI config read may *also* return that data if a
config register happens to contain ~0, so it doesn't definitively indicate
an error unless we know the register cannot contain ~0.
Use PCI_POSSIBLE_ERROR() to check the response we get when we read data
from hardware. This unifies PCI error response checking and makes error
checks consistent and easier to find.
Link: https://lore.kernel.org/r/b12005c0d57bb9d4c8b486724d078b7bd92f8321.1637243717.git.naveennaidu479@gmail.com
Signed-off-by: Naveen Naidu <naveennaidu479@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Stable-dep-of: e2226dbc4a49 ("PCI: cpqphp: Fix PCIBIOS_* return value confusion")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c64ef7e4851d1a9abbb7f7833e4936973ac5ba79 ]
In order to access the registers of the HW, we need to make sure that
the AXI bus clock is enabled. Hence let's increase the number of clocks
by one.
In order to keep backward compatibility and make sure old DTs still work
we check if clock-names is available or not. If it is, then we can
disambiguate between really having the AXI clock or a parent clock and
so we can enable the bus clock. If not, we fallback to what was done
before and don't explicitly enable the AXI bus clock.
Note that if clock-names is given, the axi clock must be the last one in
the phandle array (also enforced in the DT bindings) so that we can reuse
as much code as possible.
Fixes: 0e646c52cf0e ("clk: Add axi-clkgen driver")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20241029-axi-clkgen-fix-axiclk-v2-2-bc5e0733ad76@analog.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6ba7ea7630fb03c1ce01508bdf89f5bb39b38e54 ]
No major functional change. Noticed while checking the driver code that
this could be used.
Saves two lines.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210201151245.21845-5-alexandru.ardelean@analog.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Stable-dep-of: c64ef7e4851d ("clk: clk-axi-clkgen: make sure to enable the AXI bus clock")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f89d17ae2ac42931be2a0153fecbf8533280c927 ]
When information such as info->screen_base is not ready, calling
sh7760fb_free_mem() does not release memory correctly. Call
dma_free_coherent() instead.
Fixes: 4a25e41831ee ("video: sh7760fb: SH7760/SH7763 LCDC framebuffer driver")
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8404e56f4bc1d1a65bfc98450ba3dae5e653dda1 ]
Pass the hardware device to the DMA helpers dma_alloc_coherent() and
dma_free_coherent(). The fbdev device that is currently being used is
a software device and does not provide DMA memory. Also update the
related dev_*() output statements similarly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-28-tzimmermann@suse.de
Stable-dep-of: f89d17ae2ac4 ("fbdev: sh7760fb: Fix a possible memory leak in sh7760fb_alloc_mem()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 95bbdca4999bc59a72ebab01663d421d6ce5775d ]
Hook "qedi_ops->common->sb_init = qed_sb_init" does not release the DMA
memory sb_virt when it fails. Add dma_free_coherent() to free it. This
is the same way as qedr_alloc_mem_sb() and qede_alloc_mem_sb().
Fixes: ace7f46ba5fd ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.")
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20241026125711.484-3-thunder.leizhen@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bd65694223f7ad11c790ab63ad1af87a771192ee ]
The return value of scsi_device_reprobe() is currently ignored in
_scsih_reprobe_lun(). Fixing the calling code to deal with the potential
error is non-trivial, so for now just WARN_ON().
The handling of scsi_device_reprobe()'s return value refers to
_scsih_reprobe_lun() and the following link:
https://lore.kernel.org/all/094fdbf57487af4f395238c0525b2a560c8f68f0.1469766027.git.calvinowens@fb.com/
Fixes: f99be43b3024 ("[SCSI] fusion: power pc and miscellaneous bug fixs")
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Link: https://lore.kernel.org/r/20241024084417.154655-1-zengheng4@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 178b8f38932d635e90f5f0e9af1986c6f4a89271 ]
BUG: KASAN: slab-use-after-free in __lock_acquire+0x2aca/0x3a20
Read of size 8 at addr ffff8881082d80c8 by task modprobe/25303
Call Trace:
<TASK>
dump_stack_lvl+0x95/0xe0
print_report+0xcb/0x620
kasan_report+0xbd/0xf0
__lock_acquire+0x2aca/0x3a20
lock_acquire+0x19b/0x520
_raw_spin_lock+0x2b/0x40
attribute_container_unregister+0x30/0x160
fc_release_transport+0x19/0x90 [scsi_transport_fc]
bfad_im_module_exit+0x23/0x60 [bfa]
bfad_init+0xdb/0xff0 [bfa]
do_one_initcall+0xdc/0x550
do_init_module+0x22d/0x6b0
load_module+0x4e96/0x5ff0
init_module_from_file+0xcd/0x130
idempotent_init_module+0x330/0x620
__x64_sys_finit_module+0xb3/0x110
do_syscall_64+0xc1/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Allocated by task 25303:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x7f/0x90
fc_attach_transport+0x4f/0x4740 [scsi_transport_fc]
bfad_im_module_init+0x17/0x80 [bfa]
bfad_init+0x23/0xff0 [bfa]
do_one_initcall+0xdc/0x550
do_init_module+0x22d/0x6b0
load_module+0x4e96/0x5ff0
init_module_from_file+0xcd/0x130
idempotent_init_module+0x330/0x620
__x64_sys_finit_module+0xb3/0x110
do_syscall_64+0xc1/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 25303:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x38/0x50
kfree+0x212/0x480
bfad_im_module_init+0x7e/0x80 [bfa]
bfad_init+0x23/0xff0 [bfa]
do_one_initcall+0xdc/0x550
do_init_module+0x22d/0x6b0
load_module+0x4e96/0x5ff0
init_module_from_file+0xcd/0x130
idempotent_init_module+0x330/0x620
__x64_sys_finit_module+0xb3/0x110
do_syscall_64+0xc1/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Above issue happens as follows:
bfad_init
error = bfad_im_module_init()
fc_release_transport(bfad_im_scsi_transport_template);
if (error)
goto ext;
ext:
bfad_im_module_exit();
fc_release_transport(bfad_im_scsi_transport_template);
--> Trigger double release
Don't call bfad_im_module_exit() if bfad_im_module_init() failed.
Fixes: 7725ccfda597 ("[SCSI] bfa: Brocade BFA FC SCSI driver")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20241023011809.63466-1-yebin@huaweicloud.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d256d612f47529ed0b332298e2d5ea981a4dd5b8 ]
Fix missing call to regmap_del_irq_chip() in error handling path by
using devm_regmap_add_irq_chip().
Fixes: 0b271258544b ("mfd: rt5033: Add Richtek RT5033 driver core.")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1730302867-8391-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 808ca6de989c598bc5af1ae0ad971a66077efac0 ]
Invalidate rkey is cpu endian and immediate data is in big endian format.
Both immediate data and invalidate the remote key returned by
HW is in little endian format.
While handling the commit in fixes tag, the difference between
immediate data and invalidate rkey endianness was not considered.
Without changes of this patch, Kernel ULP was failing while processing
inv_rkey.
dmesg log snippet -
nvme nvme0: Bogus remote invalidation for rkey 0x2000019Fix in this patch
Do endianness conversion based on completion queue entry flag.
Also, the HW completions are already converted to host endianness in
bnxt_qplib_cq_process_res_rc and bnxt_qplib_cq_process_res_ud and there
is no need to convert it again in bnxt_re_poll_cq. Modified the union to
hold the correct data type.
Fixes: 95b087f87b78 ("bnxt_re: Fix imm_data endianness")
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1730110014-20755-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6d734f1bfc336aaea91313a5632f2f197608fadd ]
The pmecc "user" structure is allocated in atmel_pmecc_create_user() and
was supposed to be freed with atmel_pmecc_destroy_user(), but this other
helper is never called. One solution would be to find the proper
location to call the destructor, but the trend today is to switch to
device managed allocations, which in this case fits pretty well.
Replace kzalloc() by devm_kzalloc() and drop the destructor entirely.
Reported-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Closes: https://lore.kernel.org/all/ZvmIvRJCf6VhHvpo@gallifrey/
Fixes: f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20241001203149.387655-1-miquel.raynal@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5f856d71ccdf89b4bac0ff70ebb0bb582e7f7f18 ]
When cpufreq_register_driver() returns error, the cpufreq_init() returns
without unregister platform_driver, fix by add missing
platform_driver_unregister() when cpufreq_register_driver() failed.
Fixes: f8ede0f700f5 ("MIPS: Loongson 2F: Add CPU frequency scaling support")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2e3378f6c79a1b3f7855ded1ef306ea4406352ed ]
Driver has mixed up the R/W bit.
The LSB bit is set on write rather than read.
Change it to avoid nasty things to happen.
Fixes: e9e9d3973594 ("mfd: da9052: Avoid setting read_flag_mask for da9052-i2c driver")
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://lore.kernel.org/r/20240925-da9052-v2-1-f243e4505b07@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 37dc4737447a7667f8e9ec790dac251da057eb27 ]
The perfmon sampling mutates shared GPU state (e.g. VIVS_HI_CLOCK_CONTROL
to select the pipe for the perf counter reads). To avoid clashing with
other functions mutating the same state (e.g. etnaviv_gpu_update_clock)
the perfmon sampling needs to hold the GPU lock.
Fixes: 68dc0b295dcb ("drm/etnaviv: use 'sync points' for performance monitor requests")
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 61a6920bb604df3a0e389a2a9479e1e233e4461d ]
Older GC300 revisions have their power registers at an offset of 0x200
rather than 0x100. Add new gpu_read_power and gpu_write_power functions
to encapsulate accesses to the power addresses and fix the addresses.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Stable-dep-of: 37dc4737447a ("drm/etnaviv: hold GPU lock across perfmon sampling")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 03a2753936e85beb8239fd20ae3fb2ce90209212 ]
This patch fixes the following sparse warnings, by adding the missing endianess
conversion functions.
| etnaviv/etnaviv_dump.c:78:26: warning: restricted __le32 degrades to integer
| etnaviv/etnaviv_dump.c:88:26: warning: incorrect type in assignment (different base types)
| etnaviv/etnaviv_dump.c:88:26: expected restricted __le32 [usertype] reg
| etnaviv/etnaviv_dump.c:88:26: got unsigned short const
| etnaviv/etnaviv_dump.c:89:28: warning: incorrect type in assignment (different base types)
| etnaviv/etnaviv_dump.c:89:28: expected restricted __le32 [usertype] value
| etnaviv/etnaviv_dump.c:89:28: got unsigned int
| etnaviv/etnaviv_dump.c:210:43: warning: incorrect type in assignment (different base types)
| etnaviv/etnaviv_dump.c:210:43: expected restricted __le32
| etnaviv/etnaviv_dump.c:210:43: got long
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Stable-dep-of: 37dc4737447a ("drm/etnaviv: hold GPU lock across perfmon sampling")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3283ee771c88bdf28d427b7ff0831a13213a812c ]
This is the only place in the driver that should have to deal with
the raw hardware fences. To avoid any further confusion, consolidate
the fence handling in this file and remove any traces of this from
the header files.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Stable-dep-of: 37dc4737447a ("drm/etnaviv: hold GPU lock across perfmon sampling")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
mwifiex_config_scan()
[ Upstream commit d241a139c2e9f8a479f25c75ebd5391e6a448500 ]
Replace one-element array with a flexible-array member in `struct
mwifiex_ie_types_wildcard_ssid_params` to fix the following warning
on a MT8173 Chromebook (mt8173-elm-hana):
[ 356.775250] ------------[ cut here ]------------
[ 356.784543] memcpy: detected field-spanning write (size 6) of single field "wildcard_ssid_tlv->ssid" at drivers/net/wireless/marvell/mwifiex/scan.c:904 (size 1)
[ 356.813403] WARNING: CPU: 3 PID: 742 at drivers/net/wireless/marvell/mwifiex/scan.c:904 mwifiex_scan_networks+0x4fc/0xf28 [mwifiex]
The "(size 6)" above is exactly the length of the SSID of the network
this device was connected to. The source of the warning looks like:
ssid_len = user_scan_in->ssid_list[i].ssid_len;
[...]
memcpy(wildcard_ssid_tlv->ssid,
user_scan_in->ssid_list[i].ssid, ssid_len);
There is a #define WILDCARD_SSID_TLV_MAX_SIZE that uses sizeof() on this
struct, but it already didn't account for the size of the one-element
array, so it doesn't need to be changed.
Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver")
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241007222301.24154-1-alpernebiyasak@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
