| Age | Commit message (Collapse) | Author |
|---|
|
Enable MPESW LAG creation over SD LAG members, forming a composite LAG
hierarchy. This allows bonding multiple SD groups together under a
single MPESW configuration with shared FDB.
When enabling composite MPESW, the individual SD LAG shared FDB
configurations are temporarily torn down and recreated when the
composite LAG is disabled.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260612113904.537595-13-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
SD LAG is a virtual LAG without hardware LAG support, so it cannot use
the firmware vport LAG commands. Implement a software-based vport LAG
using egress ACL bounce rules.
Add esw_set_slave_egress_rule() to create an egress ACL rule on the
slave's manager vport that bounces traffic to the master's manager
vport. This achieves the same traffic steering as hardware vport LAG.
Redirect mlx5_cmd_create_vport_lag() and mlx5_cmd_destroy_vport_lag()
to the software implementation when operating in SD LAG mode.
In addition, adjust lag_demux creation to check SD LAG mode as well.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260612113904.537595-12-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend mlx5_lag_disable_change() to properly disable both regular LAG
and SD LAG when requested. Each LAG type uses its own devcom component
for locking.
Use mlx5_sd_get_devcom() helper to retrieve the SD devcom component,
needed for proper locking when disabling SD LAG.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260612113904.537595-11-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The lag demux resources (flow table, flow group, and rules xarray)
are stored on the shared ldev. With Socket Direct, multiple SD groups
each create their own demux FT/FG during their master's IB device
initialization. Since they all write to the same ldev fields, the
second group's init overwrites the first group's pointers, leaking
the first group's FT/FG.
During teardown, the cleanup uses the overwritten pointers, destroying
the wrong group's resources and leaving leaked flow tables in the LAG
namespace. These leaked tables can interfere with subsequently created
demux tables.
Move the demux resources from the shared ldev to per-master lag_func
instances. Each master device now owns its own independent demux
state. The rule_add and rule_del helpers look up the appropriate
master's lag_func via the existing filter/group infrastructure.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260612113904.537595-10-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When eswitch is disabled, notify the SD layer so it can clean up
SD-specific resources such as the TX flow table root configuration
on secondary devices.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260612113904.537595-9-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the eswitch transitions, propagate the change to SD: secondaries
get their TX flow table root reconfigured for the new mode, and when
all group devices move to switchdev, the per-group shared FDB is
activated.
Shared FDB activation is best-effort - failure does not block the
eswitch transition; the next transition retries.
Note: the existing mlx5_get_sd() guard that blocks switchdev for SD
devices is intentionally retained. It will be removed once all
supporting patches are in place.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260612113904.537595-8-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In Socket Direct configurations the primary and secondary PFs share the
same native_port_num. The eswitch vport metadata encodes pf_num in its
upper bits to distinguish vports across PFs. Without SD-awareness, both
PFs generate identical metadata, causing FDB rules to steer traffic to
the wrong representor.
Add mlx5_sd_pf_num_get() which remaps the pf_num for SD devices.
Use it so each PF in an SD group produces unique vport metadata.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260612113904.537595-7-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add mlx5_fs_cmd_query_l2table_silent() to query the current silent mode
state from firmware. This allows detecting if firmware has already put
secondary devices into silent mode.
During SD group registration, query the silent mode of each device. If
a device is already in silent mode (set by firmware), record this in
the fw_silents_secondaries flag and use it to help determine the
primary/secondary roles.
When fw_silents_secondaries is set, skip the driver-initiated silent
mode set/unset operations since firmware manages this state. This
handles configurations where firmware persistently silences secondary
devices.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260612113904.537595-6-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Refactor SD group registration to use devcom event-driven role
determination to ensure SD is marked as ready only after roles are fully
assigned and the group state is consistent, making outside accessors,
which will be added in downstream patches, safe to use without races.
The devcom events:
- SD_PRIMARY_SET event: each device compares bus numbers with peers
to determine which should be primary
- SD_SECONDARIES_SET event: secondaries register themselves with the
elected primary device
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260612113904.537595-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some devcom events are not expected to fail. Rather than attempting
a rollback that may not be meaningful, allow callers to pass
DEVCOM_CANT_FAIL as the rollback_event to indicate that the event
handler should not fail. If it does, emit a warning and stop
propagating to further peers, but skip the rollback path.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260612113904.537595-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Factor mlx5_devcom_send_event() into two functions:
- mlx5_devcom_locked_send_event(): performs the dispatch (and
rollback) with comp->sem already held by the caller.
- mlx5_devcom_send_event(): unchanged wrapper that takes comp->sem,
calls the locked variant, and releases it.
This lets callers bracket multiple event broadcasts under a single
held write lock, eliminating the gap between consecutive dispatches
where peer state could change.
Will be used by a downstream patch.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260612113904.537595-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
SD secondary devices share the primary's uplink and do not have
their own uplink representor. When reloading IB reps on secondary
devices, skip the uplink and only load VF/SF vport IB reps.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260612113904.537595-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v7.2
There's been quite a lot of framework improvements this time around,
though mainly cleanups and robustness rather than user visible features.
The same pattern is seen with a lot of the driver work that's going on,
there are new features but a huge proportion of this is bug fixing and
cleanup work. We also have a good selectio of new device support.
- Improvements to SDCA jack handling from Charles Keepax.
- Use of device links to make suspend handling more robust from Richard
Fitzgerald.
- Use of a new helper to factor out a common pattern in SoundWire
enmeration from Charles Keepax.
- Slimming down of the component from Kuninori Morimoto.
- Simplification of format auto selection from Kuninori Morimoto.
- Lots of conversions to guard() from Bui Duc Phuc.
- Addition of a simple-amplifier driver supporting more featureful GPIO
controller amplifiers than the previous basic driver from Herve
Codina.
- Support for AMD ACP 7.x, Cirrus Logic CS42448/CS42888, Everest Semi
ES9356, Mediatek MT2701 and MT8196, Renesas RZ/G3E, Spacemit K3,
Texas Instruments TAC5xx2 and TAS67524.
|
|
The upcoming cpu idle time accounting rework involves comparing and
subtracting cross cpu time stamps. Time stamps created with the stckf
instruction monotonic with respect to the local cpu. For cross cpu
monotonic time stamps the slightly slower stcke instruction has to
be used [1].
Convert the idle time accounting relevant usages of stckf to stcke.
[1] Principles of Operation - Setting and Inspecting the Clock
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
KVM/riscv changes for 7.2
- Batch G-stage TLB flushes for GPA range based page table updates
- Convert HGEI line management to fully per-HART
- Fix missing CSR dirty marking when FWFT state updated via ONE_REG
- Fix stale FWFT feature exposure to Guest/VM
- Speed up dirty logging write faults using MMU rwlock and atomic
PTE updates using cmpxchg() for permission-only changes
- Use flexible array for APLIC IRQ state
- Use kvm_slot_dirty_track_enabled() for logging enable check on
a memslot
- Avoid skipping valid pages in kvm_riscv_gstage_wp_range()
- Avoid skipping valid pages in kvm_riscv_gstage_unmap_range()
- Use endian-specific __lelong for NACL shared memory
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: New features for 7.2
New features for 7.2 for KVM/s390:
* KVM_PRE_FAULT_MEMORY support
* Support for 2G hugepages
* Support for the ASTFLEIE 2 facility
* kvm_arch_set_irq_inatomic Fast Inject
* Fix potential leak of uninitialized bytes
|
|
The recently added UltraRISC DP1000 is using this symbol, and in
a reasonable way as well, so export it.
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: Link: https://lore.kernel.org/linux-gpio/20260613164847.GA3152104@ax162/
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202606130210.ytVPxHlm-lkp@intel.com/
Fixes: cb7037924836 ("pinctrl: ultrarisc: Add UltraRISC DP1000 pinctrl driver")
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
If input_register_device() fails, we call input_free_device(), but keep
stale pointer to the old device in hidpp->input, which could potentially
lead to UAF. Fix that by resetting it to NULL before returning from
hidpp_connect_event().
Reported-by: zdi-disclosures@trendmicro.com
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers
Memory controller drivers for v7.2, part two
A few improvements for Tegra Memory Controller drivers, including one
fix for UBSAN report for an older commit.
* tag 'memory-controller-drv-7.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: tegra234: drop dead NULL check in tegra234_mc_icc_aggregate()
memory: tegra264: drop redundant tegra264_mc_icc_aggregate()
memory: tegra186-emc: stop borrowing MC aggregate hook for EMC
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
interface"
This reverts commit 47d7bca76dd4f36ba0525d761f247c76ec9e4b17, which was
merged by accident.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The Tiled Display Topology ID of a DisplayID Tiled Display Topology Data
Block consists of three fields:
- Tiled Display Manufacturer/Vendor ID Field (3 bytes)
- Tiled Display Product ID Code Field (2 bytes)
- Tiled Display Serial Number Field (4 bytes)
i.e. a total of 9 bytes, not 8.
The DisplayID Tiled Display Topology ID is used as the tile group
identifier.
Update both struct displayid_tiled_block topology_id member and struct
drm_tile_group group_data member to full 9 bytes.
The group data was missing the last byte of the serial number. I don't
know whether there are known bug reports that might be linked to this,
but it's plausible the last byte could be the differentiating part for
the tile groups, and fewer tile groups might have been created than
intended.
Fixes: b49b55bd4fba ("drm/displayid: add displayid defines and edid extension (v2)")
Fixes: 138f9ebb9755 ("drm: add tile_group support. (v3)")
Cc: Dave Airlie <airlied@redhat.com>
Cc: stable@vger.kernel.org # v3.19+
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260610141549.555605-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull x86 cpuid updates from Ingo Molnar:
- CPUID API updates (Ahmed S. Darwish):
- Introduce a centralized CPUID parser
- Introduce a centralized CPUID data model
- Introduce <asm/cpuid/leaf_types.h>
- Rename cpuid_leaf()/cpuid_subleaf() APIs
- treewide: Explicitly include the x86 CPUID headers
- Update to x86-cpuid-db v3.1 (Maciej Wieczor-Retman)
- Continued removal of pre-i586 support and related simplifications
(Ingo Molnar)
- Add Intel CPU model number for rugged Panther Lake (Tony Luck)
- Misc fixes, updates and cleanups by Arnd Bergmann, Chao Gao, Lukas
Bulwahn, Sohil Mehta, Maciej Wieczor-Retman.
* tag 'x86-cpu-2026-06-14' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: (25 commits)
x86/cpu: Make CONFIG_X86_CX8 unconditional
x86/cpu: Remove unused !CONFIG_X86_TSC code
x86/cpuid: Update bitfields to x86-cpuid-db v3.1
tools/x86/kcpuid: Update bitfields to x86-cpuid-db v3.1
x86/cpu: Make CONFIG_X86_TSC unconditional
MAINTAINERS: Drop obsolete FPU EMULATOR section
x86/cpu: Fix a F00F bug warning and clean up surrounding code
x86/cpu: Add Intel CPU model number for rugged Panther Lake
x86/cpuid: Introduce a centralized CPUID parser
x86/cpu: Introduce a centralized CPUID data model
x86/cpuid: Introduce <asm/cpuid/leaf_types.h>
x86/cpuid: Rename cpuid_leaf()/cpuid_subleaf() APIs
x86/cpu: Do not include the CPUID API header in asm/processor.h
Documentation: core-api/cpu_hotplug: Remove stale cpu0_hotplug docs
x86/cpu, cpufreq: Remove AMD ELAN support
x86/fpu: Remove the math-emu/ FPU emulation library
x86/fpu: Remove the 'no387' boot option
x86/fpu: Remove MATH_EMULATION and related glue code
treewide: Explicitly include the x86 CPUID headers
x86/cpu: Remove the CONFIG_X86_INVD_BUG quirk
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull x86/msr updates from Ingo Molnar:
- Large series to reorganize the rdmsr/wrmsr APIs to remove
32-bit variants and convert to 64-bit variants (Juergen Gross)
- Fix W=1 warning (HyeongJun An)
* tag 'x86-msr-2026-06-14' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip:
x86/msr: Remove wrmsrl()
x86/msr: Switch wrmsrl() users to wrmsrq()
x86/msr: Remove rdmsrl()
x86/msr: Switch rdmsrl() users to rdmsrq()
x86/msr: Remove wrmsr_safe_on_cpu()
x86/msr: Switch wrmsr_safe_on_cpu() users to wrmsrq_safe_on_cpu()
x86/msr: Remove rdmsr_safe_on_cpu()
x86/msr: Switch rdmsr_safe_on_cpu() users to rdmsrq_safe_on_cpu()
x86/msr: Don't use rdmsr_safe_on_cpu() in rdmsrq_safe_on_cpu()
x86/msr: Remove wrmsr_on_cpu()
x86/msr: Switch wrmsr_on_cpu() users to wrmsrq_on_cpu()
x86/msr: Remove rdmsr_on_cpu()
x86/msr: Switch rdmsr_on_cpu() users to rdmsrq_on_cpu()
x86/msr: Remove rdmsrl_on_cpu()
x86/msr: Switch rdmsrl_on_cpu() user to rdmsrq_on_cpu()
x86/process: Convert rdmsr() to rdmsrq() in arch_post_acpi_subsys_init() to address W=1 warning
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"SMP load-balancing updates:
- A large series to introduce infrastructure for cache-aware load
balancing, with the goal of co-locating tasks that share data
within the same Last Level Cache (LLC) domain. By improving cache
locality, the scheduler can reduce cache bouncing and cache misses,
ultimately improving data access efficiency.
Implemented by Chen Yu and Tim Chen, based on early prototype work
by Peter Zijlstra, with fixes by Jianyong Wu, Peter Zijlstra and
Shrikanth Hegde.
- A series to simplify CONFIG_SCHED_SMT ifdef usage (Shrikanth Hegde)
Fair scheduler updates:
- A series to improve SD_ASYM_CPUCAPACITY scheduling by introducing
SMT awareness (Andrea Righi, K Prateek Nayak)
- A series to optimize cfs_rq and sched_entity allocation for better
data locality (Zecheng Li)
- A preparatory series to change fair/cgroup scheduling to a single
runqueue, without the final change (Peter Zijlstra)
- Auto-manage ext/fair dl_server bandwidth (Andrea Righi)
- Fix cpu_util runnable_avg arithmetic (Hongyan Xia)
- Optimize update_tg_load_avg()'s rate-limiting code (Rik van Riel)
- Allow account_cfs_rq_runtime() to throttle current hierarchy
(K Prateek Nayak)
- Update util_est after updating util_avg during dequeue, to fix the
util signal update logic, which reduces signal noise (Vincent
Guittot)
Scheduler topology updates:
- Allow multiple domains to claim sched_domain_shared (K Prateek
Nayak)
- Add parameter to split LLC (Peter Zijlstra)
Core scheduler updates:
- Use trace_call__<tp>() to save a static branch (Gabriele Monaco)
Scheduler statistics updates:
- Drop now-stale mul_u64_u64_div_u64() cputime over-approximation
guard (Nicolas Pitre)
Deadline scheduler updates:
- Reject debugfs dl_server writes for offline CPUs (Andrea Righi)
- Fix replenishment logic for non-deferred servers (Yuri Andriaccio)
RT scheduling updates:
- Turn RT_PUSH_IPI default off for non PREEMPT_RT (Steven Rostedt)
- Update default bandwidth for real-time tasks to 1.0 (Yuri
Andriaccio)
Proxy scheduling updates:
- A series to implement Optimized Donor Migration for Proxy Execution
(John Stultz, Peter Zijlstra)
- Various proxy scheduling cleanups and fixes (Peter Zijlstra,
K Prateek Nayak)
Misc fixes, improvements and cleanups by Aaron Lu, Andrea Righi,
Zenghui Yu, Chen Yu, Guanyou.Chen, John Stultz, Shrikanth Hegde,
Peter Zijlstra, Liang Luo and Yiyang Chen"
* tag 'sched-core-2026-06-14' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: (91 commits)
sched/fair: Fix newidle vs core-sched
sched/deadline: Use task_on_rq_migrating() helper
sched/core: Combine separate 'else' and 'if' statements
sched/fair: Fix cpu_util runnable_avg arithmetic
sched/fair: Unify cfs_rq throttling via account_cfs_rq_runtime()
sched/fair: Move the throttled tasks to a local list in tg_unthrottle_up()
sched/fair: Call update_curr() before unthrottling the hierarchy
sched/fair: Use throttled_csd_list for local unthrottle
sched/fair: Convert cfs bandwidth throttling to use guards
sched/fair: Allocate cfs_tg_state with percpu allocator
sched/fair: Remove task_group->se pointer array
sched/fair: Co-locate cfs_rq and sched_entity in cfs_tg_state
sched: restore timer_slack_ns when resetting RT policy on fork
MAINTAINERS: Fix spelling mistake in Peter's name
sched: Simplify ttwu_runnable()
sched/proxy: Remove superfluous clear_task_blocked_in()
sched/proxy: Remove PROXY_WAKING
sched/proxy: Switch proxy to use p->is_blocked
sched/proxy: Only return migrate when needed
sched: Be more strict about p->is_blocked
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Futex updates:
- Optimize futex hash bucket access patterns (Peter Zijlstra)
- Large series to address the robust futex unlock race for real, by
Thomas Gleixner:
"The robust futex unlock mechanism is racy in respect to the
clearing of the robust_list_head::list_op_pending pointer because
unlock and clearing the pointer are not atomic.
The race window is between the unlock and clearing the pending op
pointer. If the task is forced to exit in this window, exit will
access a potentially invalid pending op pointer when cleaning up
the robust list.
That happens if another task manages to unmap the object
containing the lock before the cleanup, which results in an UAF.
In the worst case this UAF can lead to memory corruption when
unrelated content has been mapped to the same address by the time
the access happens.
User space can't solve this problem without help from the kernel.
This series provides the kernel side infrastructure to help it
along:
1) Combined unlock, pointer clearing, wake-up for the
contended case
2) VDSO based unlock and pointer clearing helpers with a
fix-up function in the kernel when user space was interrupted
within the critical section.
... with help by André Almeida:
- Add a note about robust list race condition (André Almeida)
- Add self-tests for robust release operations (André Almeida)
Context analysis updates:
- Implement context analysis for 'struct rt_mutex'. (Bart Van Assche)
- Bump required Clang version to 23 (Marco Elver)
Guard infrastructure updates:
- Series to remove NULL check from unconditional guards (Dmitry
Ilvokhin)
Lockdep updates:
- Restore self-test migrate_disable() and sched_rt_mutex state on
PREEMPT_RT (Karl Mehltretter)
Membarriers updates:
- Use per-CPU mutexes for targeted commands (Aniket Gattani)
- Modernize membarrier_global_expedited with cleanup guards (Aniket
Gattani)
- Add rseq stress test for CFS throttle interactions (Aniket Gattani)
percpu-rwsems updates:
- Extract __percpu_up_read() to optimize inlining overhead (Dmitry
Ilvokhin)
Seqlocks updates:
- Allow UBSAN_ALIGNMENT to fail optimizing (Heiko Carstens)
Lock tracing:
- Add contended_release tracepoint to sleepable locks such as
mutexes, percpu-rwsems, rtmutexes, rwsems and semaphores (Dmitry
Ilvokhin)
MAINTAINERS updates:
- MAINTAINERS: Add RUST [SYNC] entry (Boqun Feng)
Misc updates and fixes by Randy Dunlap, YE WEI-HONG, Fabricio Parra,
Dmitry Ilvokhin and Peter Zijlstra"
* tag 'locking-core-2026-06-14' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: (36 commits)
locking: Add contended_release tracepoint to sleepable locks
locking/percpu-rwsem: Extract __percpu_up_read()
tracing/lock: Remove unnecessary linux/sched.h include
futex: Optimize futex hash bucket access patterns
rust: sync: completion: Mark inline complete_all and wait_for_completion
MAINTAINERS: Add RUST [SYNC] entry
cleanup: Specify nonnull argument index
selftests: futex: Add tests for robust release operations
Documentation: futex: Add a note about robust list race condition
x86/vdso: Implement __vdso_futex_robust_try_unlock()
x86/vdso: Prepare for robust futex unlock support
futex: Provide infrastructure to plug the non contended robust futex unlock race
futex: Add robust futex unlock IP range
futex: Add support for unlocking robust futexes
futex: Cleanup UAPI defines
x86: Select ARCH_MEMORY_ORDER_TSO
uaccess: Provide unsafe_atomic_store_release_user()
futex: Provide UABI defines for robust list entry modifiers
futex: Move futex related mm_struct data into a struct
futex: Make futex_mm_init() void
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull vdso updates from Thomas Gleixner:
- Remove the redundant CONFIG_GENERIC_TIME_VSYSCALL after converting
the remaining users over.
- Rework and sanitize the MIPS VDSO handling, so it does not handle the
time related VDSO if there is no VDSO capable clocksource available.
Also stop mapping VDSO data pages unconditionally even if there is no
usage possible.
* tag 'timers-vdso-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip:
MIPS: VDSO: Fold MIPS_CLOCK_VSYSCALL into MIPS_GENERIC_GETTIMEOFDAY
MIPS: VDSO: Gate microMIPS restriction on GCC version
MIPS: VDSO: Fold MIPS_DISABLE_VDSO into MIPS_GENERIC_GETTIMEOFDAY
clocksource/drivers/mips-gic-timer: Only use VDSO_CLOCKMODE_GIC when it is a available
MIPS: csrc-r4k: Only use VDSO_CLOCKMODE_R4K when it is a available
MIPS: VDSO: Only map the data pages when the vDSO is used
MIPS: Introduce Kconfig MIPS_GENERIC_GETTIMEOFDAY
vdso/datastore: Always provide symbol declarations
MAINTAINERS: Add include/linux/vdso_datastore.h to vDSO block
vdso/gettimeofday: Rename __arch_get_vdso_u_timens_data()
vdso/treewide: Drop GENERIC_TIME_VSYSCALL
vdso/vsyscall: Gate update_vsyscall() behind CONFIG_GENERIC_GETTIMEOFDAY
riscv: vdso: Drop CONFIG_GENERIC_TIME_VSYSCALL guard around syscall fallbacks
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull timekeeping updates from Thomas Gleixner:
"Updates for NTP/timekeeping and PTP:
- Expand timekeeping snapshot mechanisms
The various snapshot functions are mostly used for PTP to collect
"atomic" snapshots of various involved clocks.
They lack support for the recently introduced AUX clocks and do not
provide the underlying counter value (e.g. TSC) to user space.
Exposing the counter value snapshot allows for better control and
steering.
Convert the hard wired ktime_get_snapshot() to take a clock ID,
which allows the caller to select the clock ID to be captured along
with CLOCK_MONONOTONIC_RAW. Additionally capture the underlying
hardware counter value and the clock source ID of the counter.
Expand the hardware based snapshot capture where devices provide a
mechanism to snapshot the hardware PTP clock and the system counter
(usually via PCI/PTM) to support AUX clocks and also provide the
captured counter value back to the caller and not only the clock
timestamps derived from it.
- Add a new optional read_snapshot() callback to clocksources
That is required to capture atomic snapshots from clocksources
which are derived from TSC with a scaling mechanism (e.g. Hyper-V,
KVMclock).
The value pair is handed back in the snapshot structure to the
callers, so they can do the necessary correlations in a more
precise way.
This touches usage sites of the affected functions and data structure
all over the tree, but stays fully backwards compatible for the
existing user space exposed interfaces. New PTP IOCTLs will provide
access to the extended functionality in later kernel versions"
* tag 'timers-ptp-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: (28 commits)
ptp: vmclock: Use hw_cycles from snapshot for precise TSC pairing
x86/kvmclock: Implement read_snapshot() for kvmclock clocksource
clocksource/hyperv: Implement read_snapshot() for TSC page clocksource
timekeeping: Add clocksource read_snapshot() method and hw_cycles to snapshot
ptp: Switch to ktime_get_snapshot_id() for pre/post timestamps
timekeeping: Add support for AUX clock cross timestamping
timekeeping: Remove system_device_crosststamp::sys_realtime
ALSA: hda/common: Use system_device_crosststamp::sys_systime
wifi: iwlwifi: Use system_device_crosststamp::sys_systime
ptp: Use system_device_crosststamp::sys_systime
timekeeping: Prepare for cross timestamps on arbitrary clock IDs
timekeeping: Remove ktime_get_snapshot()
virtio_rtc: Use provided clock ID for history snapshot
net/mlx5: Use provided clock ID for history snapshot
igc: Use provided clock ID for history snapshot
ice/ptp: Use provided clock ID for history snapshot
wifi: iwlwifi: Adopt PTP cross timestamps to core changes
timekeeping: Add CLOCK ID to system_device_crosststamp
timekeeping: Add system_counterval_t to struct system_device_crosststamp
timekeeping: Add CLOCK_AUX support for ktime_get_snapshot_id()
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull NOHZ updates from Thomas Gleixner:
- Fix a long standing TOCTOU in get_cpu_sleep_time_us()
- Make the CPU offline NOHZ handling more robust by disabling NOHZ on
the outgoing CPU early instead of creating unneeded state which needs
to be undone.
- Unify idle CPU time accounting instead of having two different
accounting mechanisms. These two different mechanisms are not really
independent, but the different properties can in the worst case cause
that gloabl idle time can be observed going backwards.
- Consolidate the idle/iowait time retrieval interfaces instead of
converting back and forth between them.
- Make idle interrupt time accounting more robust. The original code
assumes that interrupt time accouting is enabled and therefore stops
elapsing idle time while an interrupt is handled in NOHZ dyntick
state. That assumption is not correct as interrupt time accounting
can be disabled at compile and runtime.
- Fix an accounting error between dyntick idle time and dyntick idle
steal time. The stolen time is not accounted and therefore idle time
becomes inaccurate. The stolen time is now accounted after the fact
as there is no way to predict the steal time upfront.
* tag 'timers-nohz-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip:
sched/cputime: Handle dyntick-idle steal time correctly
sched/cputime: Handle idle irqtime gracefully
sched/cputime: Provide get_cpu_[idle|iowait]_time_us() off-case
tick/sched: Consolidate idle time fetching APIs
tick/sched: Account tickless idle cputime only when tick is stopped
tick/sched: Remove unused fields
tick/sched: Move dyntick-idle cputime accounting to cputime code
tick/sched: Remove nohz disabled special case in cputime fetch
tick/sched: Unify idle cputime accounting
s390/time: Prepare to stop elapsing in dynticks-idle
powerpc/time: Prepare to stop elapsing in dynticks-idle
sched/cputime: Correctly support generic vtime idle time
sched/cputime: Remove superfluous and error prone kcpustat_field() parameter
sched/idle: Handle offlining first in idle loop
tick/sched: Fix TOCTOU in nohz idle time fetch
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull timer core updates from Thomas Gleixner:
"Updates for the time/timer core subsystem:
- Harden the user space controllable hrtimer interfaces further to
protect against unpriviledged DoS attempts by arming timers in the
past.
- Add per-capacity hierarchies to the timer migration code to prevent
timer migration accross different capacity domains. This code has
been disabled last minute as there is a pathological problem with
SoCs which advertise a larger number of capacity domains. The
problem is under investigation and the code won't be active before
v7.3, but that turned out to be less intrusive than a full revert
as it preserves the preparatory steps and allows people to work on
the final resolution
- Export time namespace functionality as a recent user can be built
as a module.
- Initialize the jiffies clocksource before using it. The recent
hardening against time moving backward requires that the related
members of struct clocksource have been initialized, otherwise it
clamps the readout to 0, which makes time stand sill and causes
boot delays.
- Fix a more than twenty year old PID reference count leak in an
error path of the POSIX CPU timer code.
- The usual small fixes, improvements and cleanups all over the
place"
* tag 'timers-core-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: (31 commits)
posix-cpu-timers: Fix pid refcount leak in do_cpu_nanosleep() error path
time/jiffies: Register jiffies clocksource before usage
timers/migration: Temporarily disable per capacity hierarchies
timers/migration: Turn tmigr_hierarchy level_list into a flexible array
timers/migration: Deactivate per-capacity hierarchies under nohz_full
timers/migration: Fix hotplug migrator selection target on asymetric capacity machines
ntsync: Honour caller's time namespace for absolute MONOTONIC timeouts
time/namespace: Export init_time_ns and do_timens_ktime_to_host()
timers/migration: Update stale @online doc to @available
timers: Fix flseep() typo in kernel-doc comment
hrtimer: Fix the bogus return type of __hrtimer_start_range_ns()
hrtimer: Return ktime_t from hrtimer_get_next_event()/hrtimer_next_event_without()
clocksource: Clean up clocksource_update_freq() functions
alarmtimer: Remove stale return description from alarm_handle_timer()
selftests/posix_timers: Use CLOCK_THREAD_CPUTIME_ID for ITIMER_PROF measurements
scripts/timers: Add timer_migration_tree.py
timers/migration: Handle capacity in connect tracepoints
timers/migration: Split per-capacity hierarchies
timers/migration: Track CPUs in a hierarchy
timers/migration: Abstract out hierarchy to prepare for CPU capacity awareness
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull clocksource updates from Thomas Gleixner:
"Updates for clocksource/clockevent drivers:
- Add devm helpers for clocksources, which allows to simplify driver
teardown and probe failure handling.
- More module conversion work
- Update the support for the ARM EL2 virtual timer including the
required ACPI changes.
- Add clockevent and clocksource support for the TI Dual Mode Timer
- Fix the support for multiple watchdog instances in the TEGRA186
driver
- Add D1 timer support to the SUN5I driver
- The usual devicetree updates, cleanups and small fixes all over the
place"
* tag 'timers-clocksource-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: (24 commits)
clocksource: move NXP timer selection to drivers/clocksource
clocksource/drivers/timer-tegra186: Reserve and service a kernel watchdog
clocksource/drivers/timer-tegra186: Register all accessible watchdog timers
clocksource/drivers/timer-tegra186: Correct num_wdts for Tegra186 and Tegra234
clocksource/drivers/timer-tegra186: Fix support for multiple watchdog instances
clocksource/drivers/timer-ti-dm: Add clockevent support
clocksource/drivers/timer-ti-dm: Add clocksource support
clocksource/drivers/timer-ti-dm: Fix property name in comment
dt-bindings: timer: arm,arch_timer: Fix requirements for interrupt description
clocksource/drivers/arm_arch_timer: Default to EL2 virtual timer when running VHE
ACPI: GTDT: Parse information related to the EL2 virtual timer
ACPI: GTDT: Account for GTDTv3 size when walking the platform timer descriptors
clocksource: Add devm_clocksource_register_*() helpers
clocksource/drivers/sun5i: Add D1 hstimer support
dt-bindings: timer: allwinner,sun5i-a13-hstimer: add H616 and D1
dt-bindings: timer: Add StarFive JHB100 clint
dt-bindings: timer: renesas,rz-mtu3: document RZ/{T2H,N2H}
dt-bindings: timer: renesas,rz-mtu3: Remove TCIU8 interrupt
dt-bindings: timer: Remove sifive,fine-ctr-bits property
clocksource/drivers/timer-of: Make the code compatible with modules
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull interrupt chip driver updates from Thomas Gleixner:
- Replace the support for the AST2700-A0 early silicon with a proper
driver for the final A2 production silicon
- Rename and rework the StarFive JH8100 interrupt controller for the
new JHB100 SoC as JH8100 was discontinued before production.
- Add support for Amlogic A9 SoCs to the meson-gpio interrupt
controller
- Expand the Econet interrupt controller driver to support MIPS 34Kc
Vectored External Interrupt Controller mode.
- Prevent a NULL pointer dereference in the GICv4 code as the vLPI code
blindly assumes that the ITS was populated. Add the missing sanity
check.
- Add support for software triggered and for error interrupts to the
Renesas RZ/T2H driver.
- Add interrupt redirection support for the loongarch architecture.
- Add multicore support to the Realtek RTL interrupt driver
- The usual updates, enhancements and fixes all over the place
* tag 'irq-drivers-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: (32 commits)
irqchip/irq-realtek-rtl: Add multicore support
irqchip/irq-realtek-rtl: Add/simplify register helpers
irqchip/loongarch-ir: Add IR (interrupt redirection) irqchip support
irqchip/loongarch-avec: Return IRQ_SET_MASK_OK_DONE when keep affinity
irqchip/loongarch-avec: Prepare for interrupt redirection support
Docs/LoongArch: Add advanced extended IRQ model
irqchip/qcom-pdc: Use FIELD_GET() to extract bank index and bit position
irqchip/qcom-pdc: Add PDC_VERSION() macro to describe version register fields
irqchip/qcom-pdc: Tighten ioremap clamp to single DRV region size
irqchip/qcom-pdc: Split __pdc_enable_intr() into per-version helpers
irqchip/exynos-combiner: Remove useless spinlock
irqchip/renesas-rzt2h: Add error interrupts support
irqchip/renesas-rzt2h: Add software-triggered interrupts support
irqchip/gic-v4: Don't advertise VLPIs if no ITS is probed
irqchip/gic-v3-its: Use FIELD_MODIFY()
irqchip/econet-en751221: Support MIPS 34Kc VEIC mode
dt-bindings: interrupt-controller: econet: Add CPU interrupt mapping
irqchip/meson-gpio: Add support for Amlogic A9 SoCs
dt-bindings: interrupt-controller: Add support for Amlogic A9 SoCs
irqchip/meson-gpio: Use the correct register in meson_s4_gpio_irq_set_type()
...
|
|
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"Deferred probe:
- Fix race where deferred probe timeout work could be permanently
canceled by using mod_delayed_work()
- Fix missing jiffies conversion in deferred_probe_extend_timeout()
- Guard timeout extension with delayed_work_pending() to prevent
premature firing
- Use system_percpu_wq instead of the deprecated system_wq
- Update deferred_probe_timeout documentation
device:
- Replace direct struct device bitfield access (can_match, dma_iommu,
dma_skip_sync, dma_ops_bypass, state_synced, dma_coherent,
of_node_reused, offline, offline_disabled) with flag-based
accessors using bit operations
- Reject devices with unregistered buses
- Delete unused DEVICE_ATTR_PREALLOC()
- Add low-level device attribute macros with const show/store
callbacks, allowing device attributes to reside in read-only memory
- Move core device attributes to read-only memory
- Constify group array pointers in driver_add_groups() /
driver_remove_groups(), struct bus_type, and struct device_driver
device property:
- Fix fwnode reference leak in fwnode_graph_get_endpoint_by_id()
- Initialize all fields of fwnode_handle in fwnode_init()
- Provide swnode_get()/swnode_put() wrappers around kobject_get/put()
- Allow passing struct software_node_ref_args pointers directly to
PROPERTY_ENTRY_REF()
driver_override:
- Migrate amba, cdx, vmbus, and rpmsg to the generic driver_override
infrastructure, fixing a UAF from unsynchronized access to
driver_override in bus match() callbacks
- Remove the now-unused driver_set_override()
firmware loader:
- Fix recursive lock deadlock in device_cache_fw_images() when async
work falls back to synchronous execution
- Fix device reference leak in firmware_upload_register()
platform:
- Pass KBUILD_MODNAME through the platform driver registration macro
to create module symlinks in sysfs for built-in drivers; move
module_kset initialization to a pure_initcall and tegra cbb
registration to core_initcall to ensure correct ordering
- Pass THIS_MODULE implicitly through a coresight_init_driver() macro
sysfs:
- Upgrade OOB write detection in sysfs_kf_seq_show() from printk to
WARN
- Add return value clamping to sysfs_kf_read()
Rust:
- ACPI:
Fix missing match data for PRP0001 by exporting
acpi_of_match_device()
- Auxiliary:
Replace drvdata() with dedicated registration data on
auxiliary_device. drvdata() exposed the driver's bus device private
data beyond the driver's own scope, creating ordering constraints
and forcing the data to outlive all registrations that access it.
Registration data is instead scoped structurally to the
Registration object, making lifecycle ordering enforced by
construction rather than convention.
- Rust-native device driver lifetimes (HRT):
Allow Rust device drivers to carry a lifetime parameter on their
bus device private data, tied to the device binding scope -- the
interval during which a bus device is bound to a driver. Device
resources like pci::Bar<'a> and IoMem<'a> can be stored directly in
the driver's bus device private data with a lifetime bounded by the
binding scope, so the compiler enforces at build time that they do
not outlive the binding. This removes Devres indirection from every
access site and eliminates try_access() failure paths in
destructors.
Bus driver traits use a Generic Associated Type (GAT) Data<'bound>
to introduce the lifetime on the private data, rather than
parameterizing the Driver trait itself. Auxiliary registration
data, where the lifetime is not introduced by a trait callback but
must be threaded through Registration, uses the ForLt trait (a
type-level abstraction for types generic over a lifetime).
Misc:
- Fix DT overlayed devices not probing by reverting the broken
treewide overlay fix and re-running fw_devlink consumer pickup when
an overlay is applied to a bound device
- Use root_device_register() for faux bus root device; add sanity
check for failed bus init
- Fix dev_has_sync_state() data race with READ_ONCE() and move it to
base.h
- Avoid spurious device_links warning when removing a device while
its supplier is unbinding
- Switch ISA bus to dynamic root device
- Fix suspicious RCU usage in kernfs_put()
- Remove devcoredump exit callback
- Constify devfreq_event_class"
* tag 'driver-core-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/driver-core/driver-core: (81 commits)
software node: allow passing reference args to PROPERTY_ENTRY_REF()
driver core: platform: set mod_name in driver registration
coresight: pass THIS_MODULE implicitly through a macro
kernel: param: initialize module_kset in a pure_initcall
soc/tegra: cbb: Move driver registration from pure_initcall to core_initcall
firmware_loader: Fix recursive lock in device_cache_fw_images()
driver core: Use system_percpu_wq instead of system_wq
driver core: remove driver_set_override()
rpmsg: use generic driver_override infrastructure
Drivers: hv: vmbus: use generic driver_override infrastructure
cdx: use generic driver_override infrastructure
amba: use generic driver_override infrastructure
rust: devres: add 'static bound to Devres<T>
samples: rust: rust_driver_auxiliary: showcase lifetime-bound registration data
rust: auxiliary: generalize Registration over ForLt
rust: types: add `ForLt` trait for higher-ranked lifetime support
gpu: nova-core: separate driver type from driver data
samples: rust: rust_driver_pci: use HRT lifetime for Bar
rust: io: make IoMem and ExclusiveIoMem lifetime-parameterized
rust: pci: make Bar lifetime-parameterized
...
|
|
A command queue is considered valid and usable by the driver only when
it has a doorbell ID assigned (db_id != 0), meaning both the FW cmdq
creation and doorbell registration completed successfully.
However, when either ivpu_register_db() or set_context_sched_properties()
fails after ivpu_hws_cmdq_init() has already created the cmdq in FW,
the command queue is left registered in FW while the driver treats it as
uninitialized (db_id remains 0). On the next submission attempt the
driver tries to register the same cmdq again, which fails because FW
already has an entry for it.
Fix by calling ivpu_jsm_hws_destroy_cmdq() on error paths to properly
unwind FW state and allow subsequent registration attempts to succeed.
Fixes: 465a3914b254 ("accel/ivpu: Add API for command queue create/destroy/submit")
Reviewed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20260611055140.948684-1-karol.wachowski@linux.intel.com
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"Over a half of the changes here are cpufreq updates that include core
modifications, fixes of the old-style governors, new hardware support
in drivers, assorded driver fixes and cleanups, and the removal of one
driver (AMD Elan SC4*).
Apart from that, the intel_idle driver will now be able to avoid
exposing redundant C-states if PC6 is disabled and there are new
sysctl knobs for device suspend/resume watchdog timeouts, hibernation
gets built-in LZ4 support for image compression and there is the usual
collection of assorted fixes and cleanups.
Specifics:
- Fix a race between cpufreq suspend and CPU hotplug during system
shutdown (Tianxiang Chen)
- Avoid redundant target() calls for unchanged limits and fix a typo
in a comment in the cpufreq core (Viresh Kumar)
- Fix concurrency issues related to sysfs attributes access that
affect cpufreq governors using the common governor code (Zhongqiu
Han)
- Simplify frequency limit handling in the conservative cpufreq
governor (Lifeng Zheng)
- Fix descriptions of the conservative governor freq_step tunable and
the ondemand governor sampling_down_factor tunable in the cpufreq
documentation (Pengjie Zhang)
- Fix use-after-free and double free during _OSC evaluation in the
PCC cpufreq driver (Yuho Choi)
- Rework the handling of policy min and max frequency values in the
cpufreq core to allow drivers to specify special initial values for
the scaling_min_freq and scaling_max_freq sysfs attributes (Pierre
Gondois)
- Add cpufreq scaling support for Qualcomm Shikra SoC (Taniya Das,
Imran Shaik).
- Improve the warning message on HWP-disabled hybrid processors
printed by the intel_pstate driver and sync policy->cur during CPU
offline in it (Yohei Kojima, Fushuai Wang)
- Drop cpufreq support for AMD Elan SC4* (Sean Young)
- Minor fixes for cpufreq drivers (Krzysztof Kozlowski, Akashdeep
Kaur, Hans Zhang, Guangshuo Li, Xueqin Luo)
- Clean up dead dependencies on X86 in the cpufreq Kconfig (Julian
Braha)
- Allow the intel_idle driver to avoid exposing C-states that are
redundant when PC6 is disabled (Artem Bityutskiy)
- Fix memory leak and a potential race in the OPP core (Abdun Nihaal,
Di Shen)
- Mark Rust OPP methods as inline (Nicolás Antinori)
- Fix misc device registration failure path in the PM QoS core (Yuho
Choi)
- Add sysctl interface for DPM watchdog timeouts (Tzung-Bi Shih)
- Use complete() instead of complete_all() in device_pm_sleep_init()
to avoid a false-positive warning from lockdep_assert_RT_in_threaded_ctx()
when CONFIG_PROVE_RAW_LOCK_NESTING is enabled (Jiakai Xu)
- Use a flexible array for CRC uncompressed buffers during
hibernation image saving (Rosen Penev)
- Make the LZ4 algorithm available for hibernation compression
(l1rox3)
- Move the preallocate_image() call during hibernation after the
"prepare" phase of the "freeze" transition (Matthew Leach)
- Fix a memory leak in rapl_add_package_cpuslocked() in the
intel_rapl power capping driver and use sysfs_emit() in
cpumask_show() in that driver (Sumeet Pawnikar, Yury Norov)
- Fix ValueError when parsing incomplete device properties in the
pm-graph utility (Gongwei Li)"
* tag 'pm-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/rafael/linux-pm: (40 commits)
PM: dpm_watchdog: Add sysctl interface for DPM watchdog timeouts
PM: QoS: Fix misc device registration unwind
cpufreq: Use policy->min/max init as QoS request
cpufreq: Remove driver default policy->min/max init
cpufreq: Set default policy->min/max values for all drivers
cpufreq: Extract cpufreq_policy_init_qos() function
cpufreq: Documentation: fix conservative governor freq_step description
cpufreq: ti: Add EPROBE_DEFER for K3 SoCs
cpufreq: qcom: Add cpufreq scaling support for Qualcomm Shikra SoC
dt-bindings: cpufreq: Document Qualcomm Shikra SoC EPSS
powercap: intel_rapl: Use sysfs_emit() in cpumask_show()
cpufreq: governor: Fix stale prev_cpu_nice spike when enabling ignore_nice_load
cpufreq: governor: Fix data races on per-CPU idle/nice baselines
PM: hibernate: Use flexible array for CRC uncompressed buffers
powercap: intel_rapl: Fix memory leak in rapl_add_package_cpuslocked()
PM: hibernate: make LZ4 available for hibernation compression
PM: sleep: Use complete() in device_pm_sleep_init()
opp: rust: mark OPP methods as inline
cpufreq: intel_pstate: Improve warning message on HWP-disabled hybrid CPUs
cpufreq: elanfreq: Drop support for AMD Elan SC4*
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These add new hardware support (i.MX93 TMU, Amlogic T7, Intel Arrow
Lake, QCom Nord, Shikra and Hawi), fix issues in a number of places in
the thermal control core and drivers, clean up code and refactor it in
preparation for future changes:
- Rework the initialization and cleanup of thermal class cooling
devices to separate DT-based cooling device registration and
cooling device registration without DT (Daniel Lezcano, Ovidiu
Panait)
- Update the cooling device DT bindings to support 3-cell cooling
device representation, where the additional cell holds an ID to
select a cooling mechanism for devices that offer multiple cooling
mechanisms, and adjust the cooling device registration code
accordingly (Gaurav Kohli, Daniel Lezcano)
- Remove dead code from two functions in the thermal core and
simplify the unregistration of thermal governors (Rafael Wysocki)
- Fix critical temperature attribute removal handling in the generic
thermal zone hwmon support code and rework that code to register a
separate hwmon class device for each thermal zone (instead of using
one hwmon class device for all thermal zones of the same type) to
address thermal zone removal deadlocks (Rafael Wysocki)
- Use attribute groups for adding temperature attributes to hwmon
class devices associated with thermal zones (Rafael Wysocki)
- Pass WQ_UNBOUND when allocating the thermal workqueue (Marco
Crivellari)
- Fix potential shift overflow in ptc_mmio_write() and improve error
handling in proc_thermal_ptc_add() in the int340x thermal control
driver (Aravind Anilraj)
- Use sysfs_emit() for cpumask printing in the Intel powerclamp
thermal driver (Yury Norov)
- Add Arrow Lake CPU models to the intel_tcc_cooling driver (Srinivas
Pandruvada)
- Add QCom Nord, Shikra and Hawi temperature sensor DT bindings
(Deepti Jaggi, Gaurav Kohli, Dipa Ramesh Mantre)
- Use devm_add_action_or_reset() for clock disable on the NVidia
soctherm and switch it to devm cooling device registration version
(Daniel Lezcano)
- Add the Amlogic T7 thermal sensor along with thermal calibration
data read from SMC calls (Ronald Claveau)
- Fix atomic temperature read in the QCom tsens driver to comply with
hardware documentation (Priyansh Jain)
- Add SpacemiT K1 thermal sensor support (Shuwei Wu)
- Add i.MX93 temperature sensor support and filter out the invalid
temperature (Jacky Bai)
- Enable by default the TMU (Thermal Monitoring Unit) on Exynos
platform (Krzysztof Kozlowski)
- Rework interrupt initialization in the Tsens driver and add the
optional wakeup source (Priyansh Jain)
- Fix typo in a comment in the TSens QCom driver (Jinseok Kim)
- Fix trailing whitespace and repeated word in the OF code, remove
quoted string splitting across lines from the iMX7 driver, and
remove a stray space from the thermal_trip_of_attr() macro
definition (Mayur Kumar)
- Update the thermal testing facility code to avoid NULL pointer
dereferences by rejecting missing command arguments and replace
sscanf() with kstrtoint() or kstrtoul() in that code (Ovidiu
Panait, Samuel Moelius)"
* tag 'thermal-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/rafael/linux-pm: (54 commits)
thermal: sysfs: Replace sscanf() with kstrtoul()
thermal: testing: Replace sscanf() with kstrtoint()
thermal: testing: reject missing command arguments
thermal: intel: intel_tcc_cooling: Add Arrow Lake CPU models
thermal/drivers/qcom/tsens: Disable wakeup interrupt setup on automotive targets
thermal/drivers/qcom/tsens: Switch wake IRQ handling to PM callbacks
thermal/core: Fix missing stub for devm_thermal_cooling_device_register
dt-bindings: thermal: cooling-devices: Update support for 3 cells cooling device
thermal/of: Support cooling device ID in cooling-spec
thermal/of: Pass cdev_id and introduce devm registration helper
thermal/of: Add cooling device ID support
thermal/of: Rename the devm_thermal_of_cooling_device_register() function
thermal/core: Make cooling device OF node conditional on CONFIG_THERMAL_OF
thermal/of: Move cooling device OF helpers out of thermal core
hwmon: Use non-OF thermal cooling device registration API
thermal/core: Add devm_thermal_cooling_device_register()
thermal/core: Introduce non-OF thermal_cooling_device_register()
thermal/drivers/samsung: Enable TMU by default
thermal/driver/qoriq: Workaround unexpected temperature readings from tmu
thermal/drivers/qoriq: Add i.MX93 tmu support
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI support updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to upstream version
20260408, introduce support for devres-based management of ACPI notify
handlers and update some core ACPI device drivers on top of that
(which includes some fixes and cleanups), add _DEP support for PCI/CXL
roots and Intel CVS devices, fix a couple of assorted issues and clean
up code:
- Fix multiple issues related to probe, removal and missing NVDIMM
device notifications in the ACPI NFIT driver (Rafael Wysocki)
- Add support for devres-based management of ACPI notify handlers to
the ACPI core (Rafael Wysocki)
- Switch multiple core ACPI device drivers (including the ACPI PAD,
ACPI video bus, ACPI HED, ACPI thermal zone, ACPI AC, ACPI battery,
and ACPI NFIT drivers) over to using devres-based resource
management during probe (Rafael Wysocki)
- Replace mutex_lock/unlock() with guard()/scoped_guard() in the ACPI
PMIC driver (Maxwell Doose)
- Fix message kref handling in the dead device path of the ACPI IPMI
address space handler (Yuho Choi)
- Use sysfs_emit() in idlecpus_show() in the ACPI processor
aggregator device (PAD) driver (Yury Norov)
- Clean up device_id_scheme initialization in the ACPI video bus
driver (Jean-Ralph Aviles)
- Clean up lid handling in the ACPI button driver and
acpi_button_probe(), reorganize installing and removing event
handlers in that driver and switch it over to using devres-based
resource management during probe (Rafael Wysocki)
- Add support for the Legacy Virtual Register (LVR) field in I2C
serial bus resource descriptors to ACPICA (Akhil R)
- Fix multiple issues related to bounds checks, input validation,
use-after-free, and integer overflow checks in the AML interpreter
in ACPICA (ikaros)
- Update the copyright year to 2026 in ACPICA files and make minor
changes related to ACPI 6.6 support (Pawel Chmielewski)
- Remove spurious precision from format used to dump parse trees in
ACPICA (David Laight)
- Add modern standby DSM GUIDs to ACPICA header files (Daniel
Schaefer)
- Fix FADT 32/64X length mismatch warning in ACPICA (Abdelkader
Boudih)
- Update D3hot/cold device power states definitions in ACPICA header
files (Aymeric Wibo)
- Fix NULL pointer dereference in acpi_ns_custom_package() (Weiming
Shi)
- Update ACPICA version to 20260408 (Saket Dumbre)
- Add cpuidle driver check in acpi_processor_register_idle_driver()
to avoid evaluating _CST unnecessarily (Tony W Wang-oc)
- Suppress UBSAN warning caused by field misuse during PCC-based
register access in the ACPI CPPC library (Jeremy Linton)
- Add support for CPPC v4 to the ACPI CPPC library (Sumit Gupta)
- Update the ACPI device enumeration code to honor _DEP for ACPI0016
PCI/CXL host bridges and make the ACPI PCI root driver clear _DEP
dependencies for PCI roots that have become operational (Chen Pei)"
* tag 'acpi-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits)
ACPI: processor: Add cpuidle driver check in acpi_processor_register_idle_driver()
ACPI: IPMI: Fix message kref handling on dead device
ACPI: CPPC: Suppress UBSAN warning caused by field misuse
ACPI: scan: Honor _DEP for Intel CVS devices
ACPI: NFIT: core: Fix possible deadlock and missing notifications
ACPI: NFIT: core: Eliminate redundant local variable
ACPI: NFIT: core: Fix acpi_nfit_init() error cleanup
ACPI: NFIT: core: Fix possible NULL pointer dereference
ACPI: bus: Clean up devm_acpi_install_notify_handler()
ACPI: button: Switch over to devres-based resource management
ACPI: button: Reorganize installing and removing event handlers
ACPI: button: Use string literals for generating netlink messages
ACPI: button: Clean up adding and removing lid procfs interface
ACPI: button: Merge two switch () statements in acpi_button_probe()
ACPI: button: Drop redundant variable from acpi_button_probe()
ACPI: button: Rework device verification during probe
ACPI: CPPC: Add support for CPPC v4
ACPI: PAD: Use sysfs_emit() in idlecpus_show()
ACPI: scan: Honor _DEP for ACPI0016 PCI/CXL host bridge
ACPI: PCI: Clear _DEP dependencies after PCI root bridge attach
...
|
|
Pull Rust updates from Miguel Ojeda:
"This one is big due to the vendoring of the `zerocopy` library, which
allows us to replace a bunch of `unsafe` code dealing with conversions
between byte sequences and other types with safe alternatives. More
details on that below (and in its merge commit).
Toolchain and infrastructure:
- Introduce support for the 'zerocopy' library [1][2]:
Fast, safe, compile error. Pick two.
Zerocopy makes zero-cost memory manipulation effortless. We write
`unsafe` so you don't have to.
It essentially provides derivable traits (e.g. 'FromBytes') and
macros (e.g. 'transmute!') for safely converting between byte
sequences and other types. Having such support allows us to remove
some 'unsafe' code.
It is among the most downloaded Rust crates and it is also used by
the Rust compiler itself.
It is licensed under "BSD-2-Clause OR Apache-2.0 OR MIT".
The crates are imported essentially as-is (only +2/-3 lines needed
to be adapted), plus SPDX identifiers. Upstream has since added the
SPDX identifiers as well as one of the tweaks at my request, thus
reducing our future diffs on updates -- I keep the details in one
of our usual live lists [3].
In total, it is about ~39k lines added, ~32k without counting
'benches/' which are just for documentation purposes.
The series includes a few Kbuild and rust-analyzer improvements and
an example patch using it in Nova, removing one 'unsafe impl'.
I checked that the codegen of an isolated example function (similar
to the Nova patch on top) is essentially identical. It also turns
out that (for that particular case) the 'zerocopy' version, even
with 'debug-assertions' enabled, has no remaining panics, unlike a
few in the current code (since the compiler can prove the remaining
'ub_checks' statically).
So their "fast, safe" does indeed check out -- at least in that
case.
- Support AutoFDO. This allows Rust code to be profiled and optimized
based on the profile. Tested with Rust Binder: ~13% slower without
AutoFDO in the binderAddInts benchmark (using an app-launch
benchmark for the profile).
- Support Software Tag-Based KASAN.
In addition, fix KASAN Kconfig by requiring Clang.
- Add Kconfig options for each existing Rust KUnit test suite, such
as 'CONFIG_RUST_BITMAP_KUNIT_TEST'.
They are placed within a new menu, 'CONFIG_RUST_KUNIT_TESTS', in
the new 'rust/kernel/Kconfig.test' file.
- Support the upcoming Rust 1.98.0 release (expected 2026-08-20):
lint cleanups and an unstable flag rename.
- Disable 'rustdoc' documentation inlining for all prelude items,
which bloats the generated documentation.
- Ignore (in Git) and clean (in Kbuild) the (rarely) 'rustc'-generated
'*.long-type-*.txt' files.
'kernel' crate:
- Add new 'bitfield' module with the 'bitfield!' macro (extracted
from the existing 'register!' one), which declares integer types
that are split into distinct bit fields of arbitrary length.
Each field is a 'Bounded' of the appropriate bit width (ensuring
values are properly validated and avoiding implicit data loss) and
gets several generated getters and setters (infallible, 'const' and
fallible) as well as associated constants ('_MASK', '_SHIFT' and
'_RANGE'). It also supports fields that can be converted from/to
custom types, either fallibly ('?=>') or infallibly ('=>').
For instance:
bitfield! {
struct Rgb(u16) {
15:11 blue;
10:5 green;
4:0 red;
}
}
// Compile-time checks.
let color = Rgb::zeroed().with_const_green::<0x1f>();
assert_eq!(color.green(), 0x1f);
assert_eq!(color.into_raw(), 0x1f << Rgb::GREEN_SHIFT);
Add as well documentation and a test suite for it, as usual; and
update the 'register!' macro to use it.
It will be maintained by Alexandre Courbot (with Yury Norov as
reviewer) under a new 'MAINTAINERS' entry: 'RUST [BITFIELD]'.
- 'ptr' module: rework index projection syntax into keyworded syntax
and introduce panicking variant.
The keyword syntax ('build:', 'try:', 'panic:') is more explicit
and paves the way of perhaps adding more flavors in the future,
e.g. an 'unsafe' index projection.
For instance, projections now look like this:
fn f(p: *const [u8; 32]) -> Result {
// Ok, within bounds, checked at build time.
project!(p, [build: 1]);
// Build error.
project!(p, [build: 128]);
// `OutOfBound` runtime error (convertible to `ERANGE`).
project!(p, [try: 128]);
// Runtime panic.
project!(p, [panic: 128]);
Ok(())
}
Update as well the users, which now look like e.g.
// Pointer to the first entry of the GSP message queue.
let data = project!(self.0.as_ptr(), .gspq.msgq.data[build: 0]);
- 'build_assert' module: make the module the home of its macros
instead of rendering them twice.
- 'sync' module: add 'UniqueArc::as_ptr()' associated function.
- 'alloc' module:
- Fix the 'Vec::reserve()' doctest to properly account for the
existing vector length in the capacity assertion.
- Fix an incorrect operator in the 'Vec::extend_with()' 'SAFETY'
comment; add a doc test demonstrating basic usage and the
zero-length case.
- Clean imports across several modules to follow the "kernel
vertical" import style in order to minimize conflicts.
'pin-init' crate:
- User visible changes:
- Do not generate 'non_snake_case' warnings for identifiers that
are syntactically just users of a field name. This would allow
all '#[allow(non_snake_case)]' in nova-core to be removed,
which Gary will send to the nova tree next cycle.
- Filter non-cfg attributes out properly in derived structs. This
improves pin-init compatibility with other derive macros.
- Insert projection types' where clause properly.
- Other changes:
- Bump MSRV to 1.82, plus associated cleanups.
- Overhaul how init slots are projected. The new approach is
easier to justify with safety comments.
- Mark more functions as inline, which should help mitigate the
super-long symbol name issue due to lack of inlining.
rust-analyzer:
- Support '--envs' for passing env vars for crates like 'zerocopy'.
'MAINTAINERS':
- Add the following reviewers to the 'RUST' entry:
- Daniel Almeida
- Tamir Duberstein
- Alexandre Courbot
- Onur Özkan
They have been involved in the Rust for Linux project for about 7
collective years and bring expertise across several domains, which
will be very useful to have around in the future.
Thanks everyone for stepping up!
And some other fixes, cleanups and improvements"
Link: https://github.com/google/zerocopy [1]
Link: https://docs.rs/zerocopy [2]
Link: https://github.com/Rust-for-Linux/linux/issues/1239 [3]
* tag 'rust-7.2' of gitolite.kernel.org:pub/scm/linux/kernel/git/ojeda/linux: (86 commits)
MAINTAINERS: add Onur Özkan as Rust reviewer
MAINTAINERS: add Alexandre Courbot as Rust reviewer
MAINTAINERS: add Tamir Duberstein as Rust reviewer
MAINTAINERS: add Daniel Almeida as Rust reviewer
kbuild: rust: clean `zerocopy-derive` in `mrproper`
rust: make `build_assert` module the home of related macros
rust: str: clean unused import for Rust >= 1.98
rust: str: use the "kernel vertical" imports style
rust: aref: use the "kernel vertical" imports style
rust: page: use the "kernel vertical" imports style
gpu: nova-core: firmware: parse `FalconUCodeDescV2` via `zerocopy`
rust: prelude: add `zerocopy{,_derive}::FromBytes`
rust: zerocopy-derive: enable support in kbuild
rust: zerocopy-derive: add `README.md`
rust: zerocopy-derive: avoid generating non-ASCII identifiers
rust: zerocopy-derive: add SPDX License Identifiers
rust: zerocopy-derive: import crate
rust: zerocopy: enable support in kbuild
rust: zerocopy: add `README.md`
rust: zerocopy: remove float `Display` support
...
|
|
edac-updates
* ras/edac-drivers: (21 commits)
EDAC: Consistently define pci_device_ids using named initializers
EDAC/igen6: Add Intel Nova Lake-H SoC support
EDAC/igen6: Make registers for detecting IBECC configurable
EDAC/imh: Add RRL support for Intel Diamond Rapids server
EDAC/{skx_common,i10nm}: Prepare RRL for sub-channel granularity
EDAC/skx_common: Add SubChannel support to ADXL decode
EDAC/{skx_common,i10nm}: Move RRL handling to common code
EDAC/{skx_common,i10nm}: Introduce rrl_ctrl_mode
EDAC/{skx_common,i10nm}: Rename rrl_mode to rrl_source_type
EDAC/{skx_common,skx,i10nm}: Split skx_set_decode()
EDAC/{skx_common,i10nm,imh}: Move MC register access helpers to skx_common
EDAC/{skx_common,skx}: Fix UBSAN shift-out-of-bounds in skx_get_dimm_info
EDAC/igen6: Add one Intel Panther Lake-H SoC support
EDAC/igen6: Fix memory topology parsing for Panther Lake-H SoCs
EDAC/igen6: Fix call trace due to missing release()
EDAC/sb_edac: fix grammar in sb_decode_ddr3 warning
EDAC/i5400: disable error reporting at teardown and refactor helper
EDAC/i5100: disable error reporting at teardown and create helper
EDAC/i5000: disable error reporting at teardown and refactor helper
EDAC/i7300: disable error reporting if init fails and refactor helper
...
* ras/edac-misc:
RAS/AMD/ATL: Drop malformed default N from Kconfig
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- Several small cleanups of various Xen related drivers
(xen/platform-pci, xen-balloon, xenbus, xen/mcelog)
- Cleanup for Xen PV-mode related code (includes dropping the Xen
debugfs code)
- Drop the additional lazy mmu mode tracking done by Xen specific code
* tag 'for-linus-7.2-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/xenbus: Replace strcpy() with memcpy()
x86/xen: Replace generic lazy tracking with cpu specific one
x86/xen: Get rid of last XEN_LAZY_MMU uses
mm: Refactor lazy_mmu_mode_pause() and lazy_mmu_mode_resume()
x86/xen: Change interface of xen_mc_issue()
x86/xen: Drop lazy mode from trace entries
x86/xen: Remove Xen debugfs support
x86/xen: Cleanup Xen related trace points
x86/xen: Guard PV-only stuff in xen-ops.h with CONFIG_XEN_PV
xen: balloon: Replace sprintf() with sysfs_emit()
xen/mcelog: mark g_physinfo, ncpus and xen_mce_chrdev_device as __ro_after_init
xen: constify xsd_errors array
xen/platform-pci: Simplify initialization of pci_device_id array
|
|
Add Nova Lake S PMC device IDs to enable binding of the SSRAM telemetry
driver on NVL platforms, and map them to the ACPI-based discovery policy.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://patch.msgid.link/fc0e8bb00e2765fb7d145fef2ed1b0236b935c08.1781294741.git.david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The SSRAM telemetry driver extracts essential PMC device ID and power
management base address information that intel_pmc_core depends on for core
functionality. If PMT registration failure prevents this critical data from
being available, intel_pmc_core operation would break entirely. Therefore,
PMT registration failures must not block access to this data.
Change the behavior to log a warning when PMT registration fails but
continue with successful driver initialization, ensuring the primary
telemetry data remains accessible to dependent drivers.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://patch.msgid.link/4f4c324977951f6082bf2218c8b911e1ae7e0a7b.1781294741.git.david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Prepare the SSRAM telemetry driver for ACPI-based discovery by adding
support for reading telemetry regions from ACPI _DSD properties.
Add pmc_ssram_telemetry_acpi_init() to parse _DSD for telemetry discovery
tables and register them with the Intel VSEC framework. Extend ssram_type
with a p_index field to specify which PMC index each ACPI device owns
(unlike PCI which discovers all three PMCs from one device).
At this stage, no platform IDs are wired to use ACPI discovery - existing
devices continue using the PCI path. Follow-on patches will add platform
support.
Assisted-by: Claude:claude-sonnet-4-5
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://patch.msgid.link/54850d175993ee38aef99707f954492d24684dcc.1781294741.git.david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Replace devm-allocated pmc_ssram_telems pointer with a fixed-size static
array and introduce per-index probe state tracking.
This prepares the driver for later per-device probe handling where tying
the PMC tracking storage to one probed PCI device is no longer suitable.
The previous single global device_probed flag cannot describe the state of
individual PMC indices when multiple devices can be probed independently.
Replace it with per-index state (UNPROBED, PROBING, PRESENT, ABSENT) and a
staging cache that publishes discovered values only after probe completes.
This avoids races between probe/unbind and concurrent readers.
Use marked state accesses with release/acquire ordering to prevent compiler
and CPU reordering issues across concurrent probe/unbind cycles.
This patch was substantially rewritten in later revisions. Originally
developed from earlier work by Xi Pardee.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Assisted-by: Claude:claude-sonnet-4-5
Link: https://patch.msgid.link/a2cccf532bec04fcc370819890d936212bc1b14c.1781294741.git.david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Move DEVID/PWRMBASE extraction into pmc_ssram_get_devid_pwrmbase().
This is a preparatory refactor to place functionality in a common helper
for reuse by a subsequent patch. Additionally add missing bits.h
include and define SSRAM_BASE_ADDR_MASK for the address extraction mask.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/75ca738c88729f37f286f342c1fe8ff86f7eafe7.1781294741.git.david.e.box@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add per-device platform data for SSRAM telemetry PCI IDs and route probe
through a method selector driven by id->driver_data.
This is a preparatory refactor for follow-on discovery methods while
preserving current behavior: all supported IDs continue to use the PCI
initialization path.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://patch.msgid.link/1c6180097b20dbe1337828bf6d3667854d63583a.1781294741.git.david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Rename intel_pmc_ssram_telemetry_probe() to pmc_ssram_telemetry_probe() and
intel_pmc_ssram_telemetry_pci_ids[] to pmc_ssram_telemetry_pci_ids[],
updating the MODULE_DEVICE_TABLE() and pci_driver wiring accordingly.
This aligns the symbol names with the driver filename and module name,
reduces redundant intel_ prefixes, and improves readability. No functional
behavior changes are intended.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://patch.msgid.link/6d3935858214fdd0f530f9a7c08a387fa4e5e8cd.1781294741.git.david.e.box@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add an ACPI-based PMC PWRM telemetry driver for Nova Lake S. The driver
locates PMT discovery data in _DSD under the Intel VSEC UUID, parses it,
and registers telemetry regions with the PMT/VSEC framework so PMC
telemetry is exposed via existing PMT interfaces.
Export pmc_parse_telem_dsd() and pmc_find_telem_guid() to support ACPI
discovery in other PMC drivers (e.g., ssram_telemetry) without duplicating
ACPI parsing logic. Also export acpi_disc_t typedef from core.h for callers
to properly declare discovery table arrays.
Selected by INTEL_PMC_CORE. Existing PCI functionality is preserved.
Assisted-by: GitHub-Copilot:claude-opus-4.7
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://patch.msgid.link/09b8211d8a5a79fa019ee2397137a6a43cf19430.1781294741.git.david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add a proper description for the intel_pmc_ssram driver.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/bd7ba2f98450751af1de054dac0469acc1138513.1781294741.git.david.e.box@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Allow the PMT class to read discovery headers from either PCI MMIO or
ACPI-provided entries, depending on the discovery source. The new
source-aware fetch helper caches the canonical discovery header for both
paths, capping PCI MMIO reads to the mapped resource size, while keeping
the mapped PCI discovery table available for users such as crashlog.
Split intel_pmt_populate_entry() into source-specific resolvers:
- pmt_resolve_access_pci(): handles both ACCESS_LOCAL and ACCESS_BARID
for PCI-backed devices and sets entry->pcidev. Same existing
functionality.
- pmt_resolve_access_acpi(): handles only ACCESS_BARID for ACPI-backed
devices, rejecting ACCESS_LOCAL which has no valid semantics without
a physical discovery resource.
This maintains existing PCI behavior and makes no functional changes
for PCI devices.
Assisted-by: GitHub-Copilot:claude-opus-4.7
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://patch.msgid.link/4b33b04ffaf0943b67d330f48b5d1dfcb6d1be5d.1781294741.git.david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
