| Age | Commit message (Collapse) | Author |
|---|
|
Replacing strcpy() with strscpy() ensures that overflow of the target
buffer cannot happen.
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Link: https://patch.msgid.link/20260608095500.2567-4-david.laight.linux@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mana_query_link_cfg() sends an HWC command to firmware on every call,
but the link speed and QoS values it returns only change when the
driver explicitly calls mana_set_bw_clamp(). This function is called
not only by userspace via ethtool get_link_ksettings, but also
periodically by hv_netvsc through netvsc_get_link_ksettings and by
the sysfs speed_show attribute via dev_attr_show, resulting in
unnecessary HWC traffic every few minutes.
Add a link_cfg_error field to mana_port_context to cache the query
result. The field uses three states: 1 (not yet queried, initial
value set during mana_probe_port), 0 (success, speed/max_speed are
valid), or a negative errno for permanent errors like -EOPNOTSUPP
when the hardware does not support the command. Transient errors and
qos_unconfigured responses are not cached so that subsequent calls
will retry.
MANA is ops-locked because it implements net_shaper_ops, so the core
already takes netdev_lock() around all ethtool_ops and net_shaper_ops
entry points. Reuse that lock to serialize mana_query_link_cfg() and
mana_set_bw_clamp(). This prevents a concurrent mana_set_bw_clamp()
from racing with an in-flight query and publishing stale pre-clamp
speed/max_speed.
Invalidate the cache inside mana_set_bw_clamp() on success, so all
current and future callers that change the link configuration
automatically trigger a fresh query on the next mana_query_link_cfg()
call. Also reset link_cfg_error during resume in mana_probe() under
netdev_lock(), so that any query already in flight cannot later
store 0 and silently overwrite the post-resume invalidation.
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Link: https://patch.msgid.link/20260606133301.2180073-1-ernis@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The .netdev_to_port() currently takes only a net_device and returns the
port index, without verifying the netdev actually belongs to the switch
being operated on. This can cause flower rule parsing to silently
resolve to a wrong port on the local hardware.
Update both implementations felix_netdev_to_port() and
ocelot_netdev_to_port() to validate ownership. Also update the callers
in ocelot_flower.c to pass through the ocelot context.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260606125247.305167-1-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
PCIe errors detected by a Root Port or Downstream Port cause error
recovery services to run on all subordinate devices regardless of
administrative state.
The .error_detected() callback, bnxt_io_error_detected(), disables
and synchronizes IRQs via bnxt_disable_int_sync(), which calls
bnxt_cp_num_to_irq_num() to map completion rings to IRQs using
bp->bnapi.
Since bp->bnapi is allocated on NIC open and freed on NIC close, PCIe
error recovery on a closed NIC can dereference a NULL pointer.
Check if bp->bnapi is NULL before disabling and synchronizing IRQs.
Fixes: e5811b8c09df ("bnxt_en: Add IRQ remapping logic.")
Cc: stable@vger.kernel.org
Signed-off-by: Kyle Meyer <kyle.meyer@hpe.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/aiNM1CY2-StPilxW@hpe.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update the device id table to include the new device id 0x00C1.
This device's BAR layout is similar to VF's, update the function,
mana_gd_init_registers(), accordingly.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/20260605212302.2135499-1-haiyangz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A fixed link topology is commonly used to connect this switch (on port
0 or 6) to a SoC's MAC over SGMII. When inband negotiation is not used,
the switch needs to be configured to operate in force mode. As such,
enable support for force mode.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://patch.msgid.link/20260605-qca8337-force-mode-v2-1-d9a6b6545bfa@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add YT8522 100M RMII ethernet PHY base driver support, including
PHY ID and base config init function.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260605060212.41895-4-minda.chen@starfivetech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Set RXD and RX CLK pin drive strength while in YT8531s connect
with RGMII. Need to check 8531s PHY ID because 8521 and 8531s
pin drive strength is different, 8521 can not call
yt8531_set_ds().
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260605060212.41895-3-minda.chen@starfivetech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
yt8531_set_ds() default set register with mdio lock and only called
with YT8531 PHY. But new type YT8531s support RGMII and has the same
pin strength setting with YT8531, YT8531s need to call yt8531_set_ds()
setting pin drive strength. But YT8531s config init function
yt8521_config_init() already get the mdio lock with phy_select_page().
If calling yt8521_config_init() with mdio lock will cause dead lock.
Need to get the lock before calling yt8531_set_ds() and move mdio
lock out from it for YT8531s.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260605060212.41895-2-minda.chen@starfivetech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the GIC functions to allocate interrupt contexts for RDMA EQs. These
interrupt contexts may be shared with Ethernet EQs when MSI-X vectors
are limited.
The driver now supports allocating dedicated MSI-X for each EQ. Indicate
this capability through driver capability bits. The RDMA EQs pass
use_msi_bitmap=false to share MSI-X vectors with Ethernet, while the
capability flag advertises that the driver supports per-vPort EQ
separation when hardware has sufficient vectors.
Populate eq.irq on all RDMA EQs for consistency with the Ethernet path.
Also relocate the GDMA_DRV_CAP_FLAG_1_HW_VPORT_LINK_AWARE define to its
numeric BIT(6) position among the other capability flags.
Signed-off-by: Long Li <longli@microsoft.com>
Acked-by: Leon Romanovsky <leon@kernel.org>
Link: https://patch.msgid.link/20260605005717.2059954-7-longli@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use GIC functions to create a dedicated interrupt context or acquire a
shared interrupt context for each EQ when setting up a vPort.
The caller now owns the GIC reference across the EQ create/destroy
lifecycle: mana_create_eq() calls mana_gd_get_gic() before creating
each EQ and mana_destroy_eq() calls mana_gd_put_gic() after destroying
it. The msix_index invalidation is moved from mana_gd_deregister_irq()
to the mana_gd_create_eq() error path so that mana_destroy_eq() can
read the index before teardown.
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/20260605005717.2059954-6-longli@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace the GDMA global interrupt setup code with the new GIC allocation
and release functions for managing interrupt contexts.
This changes the per-queue interrupt names in /proc/interrupts from
mana_q0, mana_q1, ... to mana_msi1, mana_msi2, ... to reflect the
MSI-X index rather than a zero-based queue number. The HWC interrupt
name (mana_hwc) is unchanged.
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/20260605005717.2059954-5-longli@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To allow Ethernet EQs to use dedicated or shared MSI-X vectors and RDMA
EQs to share the same MSI-X, introduce a GIC (GDMA IRQ Context) with
reference counting. This allows the driver to create an interrupt context
on an assigned or unassigned MSI-X vector and share it across multiple
EQ consumers.
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/20260605005717.2059954-4-longli@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When querying the device, adjust the max number of queues to allow
dedicated MSI-X vectors for each vPort. The per-vPort queue count is
clamped towards MANA_DEF_NUM_QUEUES but will not exceed the hardware
maximum reported by the device.
MSI-X sharing among vPorts is enabled when there are not enough MSI-X
vectors for dedicated allocation, or when the platform does not support
dynamic MSI-X allocation (in which case all vectors are pre-allocated
at probe time and sharing is always used). The msi_sharing flag is
reset at the top of mana_gd_query_max_resources() so it is recomputed
from current hardware state on each probe or resume cycle.
Clamp apc->max_queues to gc->max_num_queues_vport in mana_init_port()
so that on resume, if max_num_queues_vport has decreased due to fewer
MSI-X vectors, num_queues is reduced accordingly before EQ allocation.
A device reporting zero ports now results in a fatal probe error since
the per-vPort MSI-X math requires at least one port.
Rename mana_query_device_cfg() to mana_gd_query_device_cfg() as it is
used at GDMA device probe time for querying device capabilities.
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/20260605005717.2059954-3-longli@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To prepare for assigning vPorts to dedicated MSI-X vectors, remove EQ
sharing among the vPorts and create dedicated EQs for each vPort.
Move the EQ definition from struct mana_context to struct mana_port_context
and update related support functions. Export mana_create_eq() and
mana_destroy_eq() for use by the MANA RDMA driver.
RSS QPs now take a vport reference via pd->vport_use_count to ensure
EQs outlive all QP consumers. The vport must already be configured by
a raw QP before an RSS QP can be created. EQs are only destroyed when
the last QP (raw or RSS) on the PD releases its reference.
Restrict each vport to a single RSS QP. The hardware only supports one
steering configuration (indirection table / hash key) per vport, and
mana_disable_vport_rx() on QP destroy disables RX globally for the
vport. Previously, creating a second RSS QP would silently overwrite
the first QP's steering config and destroy would blackhole all traffic.
This is now explicitly rejected with -EBUSY. Existing applications
(DPDK being the primary RDMA consumer) always create one RSS QP per
vport, so no real-world flows are affected.
Reject cross-port PD sharing for both raw and RSS QPs. Since EQs and
vport configuration are per-port, a PD is bound to the port used by
its first raw QP. Subsequent QPs on the same PD must use the same
port or the creation fails with -EINVAL. Previously this was silently
broken: with shared EQs it appeared to work, but with per-vPort EQs
a cross-port PD would cause wrong-port EQ teardown and corruption.
DPDK creates one PD per port so no existing flows are affected.
Serialize mana_set_channels() and the async per-port queue reset
handler against RDMA vport configuration to prevent RDMA from claiming
the vport during the detach/attach window. A channel_changing flag is
set under apc->vport_mutex before detach and checked by
mana_cfg_vport() when called from the RDMA path, blocking RDMA from
grabbing the vport during the entire window. When the port is down
and RDMA already holds the vport, the channel change is rejected with
-EBUSY.
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/20260605005717.2059954-2-longli@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On SMP systems, dw_spi_handle_err() can be called from the SPI core
kthread while the IRQ handler is still accessing the FIFO on another
CPU. Resetting the chip via dw_spi_reset_chip() during an active FIFO
read/write causes a bus error.
Fix this by calling disable_irq() before the chip reset, which masks
the IRQ and waits for any in-flight handler to complete via
synchronize_irq(). This ensures no handler is accessing the FIFO when
the reset occurs.
Signed-off-by: Peng Yang <pyangyyd@amazon.com>
Suggested-by: Jonathan Chocron <jonnyc@amazon.com>
Link: https://patch.msgid.link/20260608095849.3446-1-pyangyyd@amazon.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
pm_runtime_get_sync() increments the runtime PM usage counter even when it
returns an error. meson_spifc_remove() uses it to resume the controller
before disabling runtime PM, but never drops the usage counter again.
Balance the get with pm_runtime_put_noidle() after disabling runtime PM,
matching the teardown pattern used by other SPI controller drivers.
Found by static analysis. I do not have hardware to test this.
Fixes: c3e4bc5434d2 ("spi: meson: Add support for Amlogic Meson SPIFC")
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Link: https://patch.msgid.link/20260609052647.5-1-ruoyuw560@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The first device on a PCI root bus determines whether the host bridge is
whitelisted for P2PDMA. All Intel Xeon chips since Ice Lake (ICX, 2021)
expose a device with ID 0x09a2 as first device. It is loosely associated
with the IOMMU. All these Xeon chips support P2PDMA, so since the addition
of the device with commit feaea1fe8b36 ("PCI/P2PDMA: Add Intel 3rd Gen
Intel Xeon Scalable Processors to whitelist"), P2PDMA has been allowed on
all new Xeons without the need to amend the whitelist:
Xeons with Performance Cores:
Sapphire Rapids (SPR, 2023)
Emerald Rapids (EMR, 2023)
Granite Rapids (GNR, 2024)
Diamond Rapids (DMR, 2026)
Xeons with Efficiency Cores:
Sierra Forest (SRF, 2024)
Clearwater Forest (CWF, 2026)
However these Xeons also expose accelerators as first device on a root bus
of its own:
QuickAssist Technology (QAT, crypto & compression accelerator)
Data Streaming Accelerator (DSA, dma engine)
In-Memory Analytics Accelerator (IAA, compression accelerator)
Whitelist them for P2PDMA as well. Move their Device ID macros from the
accelerator drivers to <linux/pci_ids.h> for reuse by P2PDMA code.
Unfortunately the Device IDs vary across Xeon generations as additional
features were added to the accelerators. This currently necessitates an
amendment for each new Xeon chip.
For future chips, this need shall be avoided by an ongoing effort to extend
ACPI HMAT with PCIe P2PDMA characteristics (latency, bandwidth, ordering
constraints). The PCI core will be able look up in this BIOS-provided ACPI
table whether P2PDMA is supported, instead of relying on a whitelist that
needs to be amended continuously.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> # QAT
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/6aac4922b5fe7070b11874427a9285e42ddd05a4.1780585518.git.lukas@wunner.de
|
|
nvmet_rdma_use_inline_sg() maps the host-controlled inline data offset
into the per-command inline scatterlist. The bounds check admits any
offset with off + len <= inline_data_size, but the mapping still assumes
the data begins in the first inline page:
sg->offset = off;
sg->length = min_t(int, len, PAGE_SIZE - off);
When a port is configured with inline_data_size > PAGE_SIZE (settable up
to max(SZ_16K, PAGE_SIZE)), an offset in (PAGE_SIZE, inline_data_size]
makes "PAGE_SIZE - off" underflow, so sg->length is set to ~4 GiB and
the block backend reads far past the first inline page. num_pages(len)
also ignores the offset, so an in-bounds offset whose [off, off+len)
span crosses a page boundary under-counts the scatterlist.
Map the offset properly: split it into a page index and an in-page
offset, start the scatterlist at that page, and size the page count from
page_off + len. Because the request scatterlist may now start at
inline_sg[page_idx] rather than inline_sg[0], generalize the inline-SGL
identity test in nvmet_rdma_release_rsp() to a range test; otherwise the
persistent inline scatterlist is mistaken for an allocated one and
nvmet_req_free_sgls() frees an inline page (and warns in
free_large_kmalloc()).
Fixes: 0d5ee2b2ab4f ("nvmet-rdma: support max(16KB, PAGE_SIZE) inline data")
Cc: stable@vger.kernel.org
Suggested-by: Keith Busch <kbusch@kernel.org>
Reported-by: Bryam Vargas <hexlabsecurity@proton.me>
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Stephan Gerhold <stephan.gerhold@linaro.org> says:
Add the definitions and dt-bindings for the regulators in PM8019 to allow
controlling them through the RPM firmware. PM8019 is typically used
together with the MDM9607 SoC.
Link: https://patch.msgid.link/20260608-rpm-smd-regulator-pm8019-v1-0-c671388b9ea5@linaro.org
|
|
Add the definitions for the regulators in PM8019 to allow controlling them
through the RPM firmware. Reading the TYPE/SUBTYPE registers using SPMI
reveals that PM8019 uses a mixture of regulators from PMA8084 (hfsmps,
pldo) and PM8916 (nldo).
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260608-rpm-smd-regulator-pm8019-v1-2-c671388b9ea5@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Named initializers are better readable and more robust to changes of the
struct definition. This robustness is relevant for a planned change to
struct platform_device_id replacing .driver_data by an anonymous union.
While touching these arrays unify spacing and usage of commas.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/3fcd432a505bb1bb7f8ef0fba9162243200b3347.1780606153.git.u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add suspend/resume support to the rzv2h-rspi driver by implementing
suspend and resume callbacks that delegate to spi_controller_suspend()
and spi_controller_resume() respectively.
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/20260608202509.3651345-1-tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
TPM TIS SPI probe fails with:
tpm_tis_spi: probe of spi11.0 failed with error -110
TPM TIS SPI sets cs_change=1 on single-transfer messages to keep CS
asserted across the header, wait-state, and data phases of a transaction.
CS deassertion between these phases violates the TCG SPI flow control
specification.
This bug was introduced by commit b99181cdf9fa ("spi-geni-qcom: remove
manual CS control"), which replaced manual CS control with automatic CS
control via the FRAGMENTATION bit. The FRAGMENTATION bit controls CS
behavior after a transfer: when set to 1, CS remains asserted; when
cleared to 0, CS is deasserted.
The commit correctly sets FRAGMENTATION for non-last transfers with
cs_change=0 to keep CS asserted between chained transfers, but misses the
case where cs_change=1 is set on the last transfer. When cs_change=1 on
the last transfer, the client requests CS to remain asserted after the
message completes, so FRAGMENTATION must be set to 1 in this case as well.
Fix setup_se_xfer() to set FRAGMENTATION when cs_change=1 on the last
transfer.
Also fix the same missing case in setup_gsi_xfer() and correct it to
write 1 instead of the raw bitmask FRAGMENTATION (value 4) to
peripheral.fragmentation. This field is a 1-bit boolean consumed by
gpi_create_spi_tre() via u32_encode_bits(..., TRE_SPI_GO_FRAG). Writing 4
to a 1-bit field causes u32_encode_bits() to mask it to 0, silently
disabling the FRAGMENTATION bit in the GPI TRE regardless of the
cs_change logic.
Fixes: b99181cdf9fa ("spi-geni-qcom: remove manual CS control")
Cc: stable@vger.kernel.org
Reviewed-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Link: https://patch.msgid.link/20260609-fix-spi-fragmentation-bit-logic-v2-1-e18efc255563@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The INA238 family supports eight conversion time steps from 50 us to
4120 us (SQ52206: 66 us to 8230 us). At the millisecond granularity of
update_interval, the four shortest steps (50, 84, 150, 280 us) all
round to the same value and cannot be individually selected.
Add support for the generic update_interval_us attribute, which reports
and programs the same ADC cycle time as update_interval but in
microseconds, giving userspace full access to all conversion time steps.
Both attributes reflect the total cycle time including the active
averaging count: the reported value is the raw conversion time
multiplied by the number of averaged samples, and writes apply the
inverse mapping.
Signed-off-by: Ferdinand Schwenk <ferdinand.schwenk@advastore.com>
Link: https://lore.kernel.org/r/20260609-hwmon-ina238-update-interval-us-v2-v3-3-016b55567950@advastore.com
[groeck: Fixed some multi-line alignment issues]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Some hardware monitoring chips support update intervals below one
millisecond. The existing update_interval attribute uses millisecond
granularity, which causes sub-millisecond steps to round to the same
value and become inaccessible from userspace.
Introduce update_interval_us, a companion chip-level attribute that
expresses the same update interval in microseconds. Drivers
implementing this attribute should also implement update_interval for
compatibility with millisecond-based userspace interfaces.
Signed-off-by: Ferdinand Schwenk <ferdinand.schwenk@advastore.com>
Link: https://lore.kernel.org/r/20260609-hwmon-ina238-update-interval-us-v2-v3-2-016b55567950@advastore.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Expose INA238 ADC averaging count (AVG) and conversion timing
(VBUSCT/VSHCT/VTCT) through chip-level hwmon attributes:
chip/samples
chip/update_interval
Use per-chip conversion-time lookup tables so the same helpers work
for INA228/INA237/INA238/INA700/INA780 and SQ52206. Cache ADC_CONFIG
in driver data and update it on writes to avoid extra register reads
during read-modify-write updates.
Report update_interval in milliseconds as required by the hwmon ABI.
Compute it from raw ADC cycle time multiplied by the active averaging
count, and apply the inverse mapping on writes so programmed conversion
time tracks the selected sample count.
Clamp user-provided update_interval before unit scaling to prevent
overflow in arithmetic conversions.
Also combine chip attributes in HWMON_CHANNEL_INFO using a bitwise OR
for a single logical chip channel.
Signed-off-by: Ferdinand Schwenk <ferdinand.schwenk@advastore.com>
Link: https://lore.kernel.org/r/20260609-hwmon-ina238-update-interval-us-v2-v3-1-016b55567950@advastore.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
iommu_dma_iova_link_swiotlb() processes a mapping that is unaligned in three
parts, the head, middle and trailer. If the middle is empty because there
are no aligned pages it will call down to iommu_map() with a 0 size
which the iommupt implementation will fail as illegal.
It then tries to do an error unwind and starts from the wrong spot
corrupting the mapping so the eventual destruction triggers a WARN_ON.
Check for 0 length and avoid mapping and use offset not 0 as the starting
point to unlink.
This is frequently triggered by using some kinds of thunderbolt NVMe
drives that trigger forced SWIOTLB for unaligned memory. NVMe seems to
pass in oddly aligned buffers for the passthrough commands from smartctl
that hit this condition.
Cc: stable@vger.kernel.org
Fixes: 433a76207dcf ("dma-mapping: Implement link/unlink ranges API")
Reported-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/0-v1-8536728bc89f+469-swiotlb_warn_jgg@nvidia.com
|
|
Implement the query port speed callback to report the port effective
bandwidth directly in 100 Mb/s granularity.
Link: https://patch.msgid.link/r/20260608083927.4116-1-tomsela@amazon.com
Reviewed-by: Michael Margolin <mrgolin@amazon.com>
Reviewed-by: Yonatan Nachum <ynachum@amazon.com>
Signed-off-by: Tom Sela <tomsela@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Add support for reporting 800 Gbps as 8X NDR and 1600 Gbps as 8X XDR
link speeds.
Link: https://patch.msgid.link/r/20260608083736.48454-1-tomsela@amazon.com
Reviewed-by: Michael Margolin <mrgolin@amazon.com>
Reviewed-by: Yonatan Nachum <ynachum@amazon.com>
Signed-off-by: Tom Sela <tomsela@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Don't just overwrite the original pointer passed to krealloc()
with its return value without checking latter:
MEM = krealloc(MEM, SZ, GFP);
If krealloc() returns NULL, that erases the pointer
to the still allocated memory, hence leaks this memory.
Instead, use a temporary variable, check it's not NULL
and only then assign it to the original pointer:
TMP = krealloc(MEM, SZ, GFP);
if (!TMP) return;
MEM = TMP;
While on it, use krealloc_array().
Fixes: 6d45c81d229d ("drm/vc4: Add support for branching in shader validation.")
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patch.msgid.link/20260606123817.37222-1-grandmaster@al2klimov.de
|
|
Use a flexible array member to remove one allocation. Simplifies code
slightly.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The driver carries custom system suspend/resume handling that manually
tracks a suspended state and conditionally calls
geni_i2c_runtime_suspend()
from the noirq suspend path, then adjusts runtime PM state by hand. This
duplicates PM core behavior and adds unnecessary complexity.
Drop the manual state tracking and switch to pm_runtime_force_suspend()
and pm_runtime_force_resume() for system sleep. These helpers already
perform the required checks, call the runtime PM callbacks when needed,
and keep runtime PM state transitions consistent.
Reviewed-by: Mukesh Kumar Savaliya <mukesh.savaliya@oss.qualcomm.com>
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260520-use_pm_runtime_apis-v1-1-6a5238fc6cb6@oss.qualcomm.com
|
|
This issue was pointed out by Sashiko.
vbbck is fed internally from vio18. For the MT6359, the default supply
name was incorrectly set as "VIO18", instead of the supply's default
"VIO18". In practice this still works, but it causes the regulator
description copy and replace to always happen. For the MT6359P the
name is correct.
Fix the supply name for MT6359 so that both instances are the same and
correct. Also copy the comment about the internal supply from the MT6359
list to the MT6359P list.
Fixes: 10be8fc1d534 ("regulator: mt6359: Add regulator supply names")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20260609083630.1600070-1-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Replacing strcpy() with strscpy() ensures that overflow of the target
buffer cannot happen.
Link: https://patch.msgid.link/r/20260608095500.2567-2-david.laight.linux@gmail.com
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Link: https://patch.msgid.link/r/20260606202633.5018-11-david.laight.linux@gmail.com
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Link: https://patch.msgid.link/r/20260606202633.5018-10-david.laight.linux@gmail.com
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Sashiko noticed mlx4 was using whatever random access flags were provided
when IB_MR_REREG_ACCESS is not used. Since IB_MR_REREG_TRANS needs
access_flags it used the random ones which means it doesn't work sensibly
if userspace provides only IB_MR_REREG_TRANS.
Keep track of the current access_flag of the MR and use it if the user
does not specify one.
Also fixup a little confusion around mmr.access, it is the HW access flags
so the convert_access() was missing. But nothing reads this by the time
rereg_mr can happen.
Fixes: 9376932d0c26 ("IB/mlx4_ib: Add support for user MR re-registration")
Link: https://patch.msgid.link/r/0-v1-29ca7a402625+ddd6-mlx4_rereg_flags_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
A couple of symbol declarations shadow earlier variables in the region
attach paths. Shadowing makes it harder to tell which object is being
referenced and can obscure future bugs.
Reuse the existing 'cxld' variable in cxl_port_attach_region() and
rename the endpoint decoder iterator in cxl_region_attach() to avoid
shadowing the function parameter.
No functional change.
Found with sparse.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260605040504.865728-1-alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Revisit and reorganize the locking and lock coverage of the
ap->lock spinlock as used in the two sysfs functions
se_bind_store() and se_associate_store().
A kernel run reported a possible deadlock situation, caused by
holding the spinlock (ap->lock) while triggering a uevent.
The fix rearranges the code protected by the spinlock by excluding
the uevent invocation, which does not require protection.
Additionally, the start of the protected region is moved earlier
to cover more lines, ensuring a consistent view of the AP queue
state between reading and updating its struct fields.
=====================================================
WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
7.1.0-20260601.rc6.git12.516b5dbd4d4a.300.fc44.s390x+debug #1 Not tainted
-----------------------------------------------------
setupseguest.sh/11034 [HC0[0]:SC0[2]:HE1:SE0] is trying to acquire:
000001c991f498e8 (fs_reclaim){+.+.}-{0:0}, at: __kmalloc_cache_noprof+0x5a/0x6d0
and this task is already holding:
000000c4a1a12378 (&aq->lock){+.-.}-{2:2}, at: se_bind_store+0x96/0x3a0
which would create a new lock dependency:
(&aq->lock){+.-.}-{2:2} -> (fs_reclaim){+.+.}-{0:0}
but this new dependency connects a SOFTIRQ-irq-safe lock:
(&aq->lock){+.-.}-{2:2}
... which became SOFTIRQ-irq-safe at:
__lock_acquire+0x5ae/0x15a0
lock_acquire+0x14c/0x400
_raw_spin_lock_bh+0x58/0xb0
ap_tasklet_fn+0x72/0xd0
tasklet_action_common+0x174/0x1b0
handle_softirqs+0x180/0x5c0
irq_exit_rcu+0x196/0x200
do_ext_irq+0x12a/0x4d0
ext_int_handler+0xc6/0xf0
folio_zero_user+0x1c6/0x240
folio_zero_user+0x182/0x240
vma_alloc_anon_folio_pmd+0xa0/0x1d0
__do_huge_pmd_anonymous_page+0x3a/0x200
__handle_mm_fault+0x56c/0x590
handle_mm_fault+0xa2/0x370
do_exception+0x292/0x590
__do_pgm_check+0x136/0x3e0
pgm_check_handler+0x114/0x160
to a SOFTIRQ-irq-unsafe lock:
(fs_reclaim){+.+.}-{0:0}
... which became SOFTIRQ-irq-unsafe at:
...
__lock_acquire+0x5ae/0x15a0
lock_acquire+0x14c/0x400
__fs_reclaim_acquire+0x44/0x50
fs_reclaim_acquire+0xbe/0x100
fs_reclaim_correct_nesting+0x20/0x70
dotest+0x5e/0x148
locking_selftest+0x2854/0x2a88
start_kernel+0x3b2/0x4f0
startup_continue+0x2e/0x40
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(fs_reclaim);
local_irq_disable();
lock(&aq->lock);
lock(fs_reclaim);
<Interrupt>
lock(&aq->lock);
*** DEADLOCK ***
4 locks held by setupseguest.sh/11034:
#0: 000000c485d01440 (sb_writers#4){.+.+}-{0:0}, at: vfs_write+0x2fc/0x380
#1: 000000c4d2283288 (&of->mutex#2){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x12a0x270
#2: 000000c4a1830e48 (kn->active#172){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x1e/0x270
#3: 000000c4a1a12378 (&aq->lock){+.-.}-{2:2}, at: se_bind_store+0x96/0x3a0
the dependencies between SOFTIRQ-irq-safe lock and the holding lock:
-> (&aq->lock){+.-.}-{2:2} {
HARDIRQ-ON-W at:
__lock_acquire+0x5ae/0x15a0
lock_acquire+0x14c/0x400
_raw_spin_lock_bh+0x58/0xb0
ap_queue_init_state+0x2e/0x50
ap_scan_domains+0x5d6/0x620
ap_scan_adapter+0x4c0/0x810
ap_scan_bus+0x70/0x350
ap_scan_bus_wq_callback+0x56/0x80
process_one_work+0x2ba/0x820
worker_thread+0x21a/0x400
kthread+0x164/0x190
__ret_from_fork+0x4c/0x340
ret_from_fork+0xa/0x30
IN-SOFTIRQ-W at:
__lock_acquire+0x5ae/0x15a0
lock_acquire+0x14c/0x400
_raw_spin_lock_bh+0x58/0xb0
ap_tasklet_fn+0x72/0xd0
tasklet_action_common+0x174/0x1b0
handle_softirqs+0x180/0x5c0
irq_exit_rcu+0x196/0x200
do_ext_irq+0x12a/0x4d0
ext_int_handler+0xc6/0xf0
folio_zero_user+0x1c6/0x240
folio_zero_user+0x182/0x240
vma_alloc_anon_folio_pmd+0xa0/0x1d0
__do_huge_pmd_anonymous_page+0x3a/0x200
__handle_mm_fault+0x56c/0x590
handle_mm_fault+0xa2/0x370
do_exception+0x292/0x590
__do_pgm_check+0x136/0x3e0
pgm_check_handler+0x114/0x160
INITIAL USE at:
__lock_acquire+0x5ae/0x15a0
lock_acquire+0x14c/0x400
_raw_spin_lock_bh+0x58/0xb0
ap_queue_init_state+0x2e/0x50
ap_scan_domains+0x5d6/0x620
ap_scan_adapter+0x4c0/0x810
ap_scan_bus+0x70/0x350
ap_scan_bus_wq_callback+0x56/0x80
process_one_work+0x2ba/0x820
worker_thread+0x21a/0x400
kthread+0x164/0x190
__ret_from_fork+0x4c/0x340
ret_from_fork+0xa/0x30
}
... key at: [<000001c9936e8aa0>] __key.7+0x0/0x10
the dependencies between the lock to be acquired
and SOFTIRQ-irq-unsafe lock:
-> (fs_reclaim){+.+.}-{0:0} {
HARDIRQ-ON-W at:
__lock_acquire+0x5ae/0x15a0
lock_acquire+0x14c/0x400
__fs_reclaim_acquire+0x44/0x50
fs_reclaim_acquire+0xbe/0x100
fs_reclaim_correct_nesting+0x20/0x70
dotest+0x5e/0x148
locking_selftest+0x2854/0x2a88
start_kernel+0x3b2/0x4f0
startup_continue+0x2e/0x40
SOFTIRQ-ON-W at:
__lock_acquire+0x5ae/0x15a0
lock_acquire+0x14c/0x400
__fs_reclaim_acquire+0x44/0x50
fs_reclaim_acquire+0xbe/0x100
fs_reclaim_correct_nesting+0x20/0x70
dotest+0x5e/0x148
locking_selftest+0x2854/0x2a88
start_kernel+0x3b2/0x4f0
startup_continue+0x2e/0x40
INITIAL USE at:
__lock_acquire+0x5ae/0x15a0
lock_acquire+0x14c/0x400
__fs_reclaim_acquire+0x44/0x50
fs_reclaim_acquire+0xbe/0x100
fs_reclaim_correct_nesting+0x20/0x70
dotest+0x5e/0x148
locking_selftest+0x2854/0x2a88
start_kernel+0x3b2/0x4f0
startup_continue+0x2e/0x40
}
... key at: [<000001c991f498e8>] __fs_reclaim_map+0x0/0x30
... acquired at:
check_prev_add+0x178/0xf40
__lock_acquire+0x12aa/0x15a0
lock_acquire+0x14c/0x400
__fs_reclaim_acquire+0x44/0x50
fs_reclaim_acquire+0xbe/0x100
__kmalloc_cache_noprof+0x5a/0x6d0
kobject_uevent_env+0xd4/0x420
ap_send_se_bind_uevent+0x48/0x70
se_bind_store+0x146/0x3a0
kernfs_fop_write_iter+0x18c/0x270
vfs_write+0x23c/0x380
ksys_write+0x88/0x120
__do_syscall+0x170/0x750
system_call+0x72/0x90
stack backtrace:
CPU: 6 UID: 0 PID: 11034 Comm: setupseguest.sh Not tainted 7.1.0-20260601.rc6.git2.516b5dbd4d4a.300.fc44.s390x+debug #1 PREEMPT
Hardware name: IBM 9175 ME1 701 (KVM/Linux)
Call Trace:
[<000001c98ffa0a7e>] dump_stack_lvl+0xae/0x108
[<000001c9900a6d7a>] print_bad_irq_dependency+0x47a/0x480
[<000001c9900a7184>] check_irq_usage+0x404/0x4c0
[<000001c9900a73b8>] check_prev_add+0x178/0xf40
[<000001c9900aaf1a>] __lock_acquire+0x12aa/0x15a0
[<000001c9900ab35c>] lock_acquire+0x14c/0x400
[<000001c9903be454>] __fs_reclaim_acquire+0x44/0x50
[<000001c9903be51e>] fs_reclaim_acquire+0xbe/0x100
[<000001c9903cf4ca>] __kmalloc_cache_noprof+0x5a/0x6d0
[<000001c9910ca9d4>] kobject_uevent_env+0xd4/0x420
[<000001c990d84098>] ap_send_se_bind_uevent+0x48/0x70
[<000001c990d87416>] se_bind_store+0x146/0x3a0
[<000001c99057da7c>] kernfs_fop_write_iter+0x18c/0x270
[<000001c99047712c>] vfs_write+0x23c/0x380
[<000001c990477438>] ksys_write+0x88/0x120
[<000001c9910f64e0>] __do_syscall+0x170/0x750
[<000001c99110a412>] system_call+0x72/0x90
INFO: lockdep is turned off.
Fixes: 4179c3984227 ("s390/ap: Implement SE bind and associate uevents")
Reported-by: Ingo Franzki <ifranzki@linux.ibm.com>
Suggested-by: Finn Callies <fcallies@linux.ibm.com>
Reviewed-by: Finn Callies <fcallies@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
In the NVMe multipath code, if nvme_add_ns_head_cdev() fails during
nvme_mpath_set_live(), the error is ignored. However, during teardown,
nvme_remove_head() unconditionally calls nvme_cdev_del(). This teardown
asymmetry leads to a kernel panic if the character device was never
successfully initialized.
BUG: kernel NULL pointer dereference, address: 00000000000000d0
device_del+0x39/0x3c0
cdev_device_del+0x15/0x50
nvme_cdev_del+0xe/0x20 [nvme_core]
nvme_mpath_shutdown_disk+0x38/0x60 [nvme_core]
nvme_ns_remove+0x177/0x1f0 [nvme_core]
nvme_remove_namespaces+0xdc/0x130 [nvme_core]
nvme_do_delete_ctrl+0x71/0xd0 [nvme_core]
Additionally, a memory leak exists in the nvme_cdev_add() failure path.
Previously, dev_set_name() was called before ida_alloc(). If ida_alloc()
subsequently failed, device_initialize() was never called, meaning
put_device() could not be used to clean up the kobject, leaking the
memory allocated by dev_set_name().
* Introduces the NVME_NSHEAD_CDEV_LIVE and NVME_NS_CDEV_LIVE bits to track
the successful creation of the character devices. Teardown routines now
check these bits before attempting deletion.
* Refactor nvme_cdev_add() to accept the formatted device name as a
parameter, moving dev_set_name() after the IDA allocation and
immediately before device_initialize(). This ensures any internally
allocated strings are safely cleaned up by put_device() upon failure.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Make ethtool not take rtnl_lock for SET commands when operation
is performed on an ops-locked driver. cfg/cfg_pending are now
ops-locked, since only ethtool modifies them.
Some SET driver callbacks will still need rtnl_lock, most notably
those which may end up calling netdev_update_features() or the qdisc
layer (via netif_set_real_num_tx_queues()). Let drivers selectively
opt back into the rtnl_lock with a new bitfield in ops.
We need two helpers since Netlink and ioctl cmds have different
values. Keep the helpers side by side in common.h to make sure
they get updated together, even tho they will only get called
from ioctl.c and netlink.c.
SET commands which don't use ethnl_default_set_doit() are converted
by subsequent commits.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260605002912.3456868-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ethnl_default_doit() and ethnl_default_dump_one() are both used
exclusively for GET callbacks (former to get info for a single
device or get global strings). ops-locked devices don't need
rtnl_lock for GET callbacks, stop taking it.
Introduce an opt-out mechanism for devices which use phylink (fbnic)
since phylink currently depends on rtnl_lock protection. Subsequent
patches will add more exceptions, anyway. Practically the new helpers
for judging if command needs rtnl_lock could also call
netdev_need_ops_lock() but I find that it makes the code in the callers
slightly less obvious.
Add a helper for IOCTLs already, even tho it's unused so that
we can keep them in sync as the series progresses.
This is the first user-visible step of moving ethtool ops out
from under rtnl. Subsequent patches do the same for SET ops,
as well as the ioctl path.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260605002912.3456868-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dev->hwprov tracks the active hwtstamp provider for the device.
Make it ops protected (instance lock if the netdev driver opts
into holding instance lock around callbacks, otherwise rtnl_lock).
hwprov is written and read in:
- drivers/net/phy/phy_device.c
phydev and ops protection don't currently mix, add a comment
- net/ethtool/
as of now holds both rtnl lock and ops lock, this one will
soon only hold one lock or the other
read in:
- net/core/dev_ioctl.c
holds both rtnl lock and ops lock
- net/core/timestamping.c
RCU reader
The new netdev_ops_lock_dereference() helper does not have
"compat" in the name. The name would be quite long and I think
in this case it should be obvious that we need _a_ lock.
netdev_lock_dereference() already exists and means dev->lock
is always expected.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260605002912.3456868-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
phydev <> netdev linking and lifecycle depends on rtnl_lock.
We want to switch to instance locks for most ethtool ops.
Let's add an assert that ops locked devices don't use phydev
today. If one does we can either opt the phy ops out of
being purely ops locked, or do deeper surgery to make phy
locking ops-compatible. I don't think there's any fundamental
challenge to make that work.
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260605002912.3456868-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When RX hardware timestamping is enabled, a 16-byte inline timestamp header
is added to the start of the packet buffer, causing FPE handshake
verification to fail.
Because an incorrect packet buffer is passed to igc_fpe_handle_mpacket(),
the mem_is_zero() check inspects the timestamp metadata instead of the
actual mPacket payload. As a result, valid Verify/Response mPackets can be
missed when inline RX timestamps are present.
Pass pktbuf + pkt_offset to igc_fpe_handle_mpacket() so it inspects the
actual mPacket payload instead of the timestamp header.
Fixes: 5422570c0010 ("igc: add support for frame preemption verification")
Co-developed-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Signed-off-by: KhaiWenTan <khai.wen.tan@linux.intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
netif_set_xps_queue() should not be called for an XDP Tx queue, since such
queues are not netdev-exposed. On systems with number of CPUs >=64, on E610
adapter, netdev is configured with maximum number queue pairs being 63
(due to MSI-X assignment), but configuring XDP results in 64 XDP queues.
So, during XDP program load, when netif_set_xps_queue() is called for the
last XDP queue, we get a WARNING with a call trace and KASAN report
afterwards (if enabled).
[ 2012.699800] WARNING: net/core/dev.c:2854 at __netif_set_xps_queue+0x116a/0x1e40, CPU#36: xdpsock/103668
[...]
[ 2012.700029] RIP: 0010:__netif_set_xps_queue+0x116a/0x1e40
[ 2012.700035] Code: b6 34 06 48 89 f8 83 e0 07 83 c0 01 40 38 f0 7c 09 40 84 f6 0f 85 03 0a 00 00 0f b7 44 24 40 66 43 89 44 6a 18 e9 01 fb ff ff <0f> 0b e9 f2 ee ff ff 44 8b 44 24 44 45 85 c0 74 50 4d 85 e4 0f 84
[ 2012.700040] RSP: 0018:ffff8882369aeb28 EFLAGS: 00010246
[ 2012.700046] RAX: 0000000000000000 RBX: 000000000000003f RCX: 0000000000000000
[ 2012.700050] RDX: 1ffff1111da3d891 RSI: ffff888120e34250 RDI: ffff8888ed1ec488
[ 2012.700054] RBP: ffff888913281560 R08: 0000000000000000 R09: ffff8888ed1ec000
[ 2012.700058] R10: ffff8888a2e83180 R11: 0000000000000000 R12: 0000000000007fa8
[ 2012.700061] R13: 000000000000003f R14: ffff888120e34854 R15: ffff8889132817c8
[ 2012.700065] FS: 00007fc8ea9ff740(0000) GS:ffff88884cefe000(0000) knlGS:0000000000000000
[ 2012.700069] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2012.700073] CR2: 00007f81c8000020 CR3: 00000002299f8006 CR4: 00000000007726f0
[ 2012.700077] PKRU: 55555554
[ 2012.700080] Call Trace:
[ 2012.700084] <TASK>
[ 2012.700087] ? ktime_get+0x61/0x150
[ 2012.700097] ? usleep_range_state+0x133/0x1b0
[ 2012.700108] ? __pfx_usleep_range_state+0x10/0x10
[ 2012.700114] netif_set_xps_queue+0x31/0x50
[ 2012.700119] ixgbe_configure_tx_ring+0x472/0x920 [ixgbe]
[...]
[ 2012.700486] ixgbe_xdp+0x38f/0x750 [ixgbe]
[...]
[ 2012.701094] BUG: KASAN: slab-out-of-bounds in __netif_set_xps_queue+0x1ac5/0x1e40
[ 2012.701100] Write of size 4 at addr ffff88888d43cff8 by task xdpsock/103668
Skip XPS configuration for XDP Tx queues.
Fixes: 33fdc82f0883 ("ixgbe: add support for XDP_TX action")
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Patryk Holda <patryk.holda@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add padding to virtchnl2 PTP structures to match the Control Plane
expected message sizes:
* virtchnl2_ptp_get_dev_clk_time: 8 -> 16 bytes
* virtchnl2_ptp_set_dev_clk_time: 8 -> 16 bytes
* virtchnl2_ptp_get_cross_time: 16 -> 24 bytes
The FW expects the above sizes and PTP negotiation fails due to the
mismatch. Previously neither the FW nor the driver checked message/reply
sizes strictly, so the problem appeared only after recent validation
improvements.
reproduction steps:
ptp4l -i <pf> -m
Observe: failed to open /dev/ptp0: Permission denied
Fixes: bf27283ba594 ("virtchnl: add PTP virtchnl definitions")
Cc: stable@vger.kernel.org
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Przemyslaw Korba <przemyslaw.korba@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When mtk_pcie_enable_port() fails, mtk_pcie_port_free() removes the port
from pcie->ports and frees the port structure. However, the IRQ domains set
up earlier by mtk_pcie_init_irq_domain() are never freed.
Fix this by refactoring mtk_pcie_irq_teardown() into a per-port helper,
mtk_pcie_irq_teardown_port(), and calling it from mtk_pcie_setup() when
mtk_pcie_enable_port() fails. Since the IRQ teardown must only happen in
the probe error path (during resume, child devices may have active MSI
mappings and the NOIRQ context prohibits sleeping locks),
mtk_pcie_enable_port() is changed to return an error code so callers can
distinguish the two paths and act accordingly.
This issue was reported by Sashiko while reviewing the EcoNet EN7528 SoC
support series.
Fixes: b099631df160 ("PCI: mediatek: Add controller support for MT2712 and MT7622")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org # 5.10
Cc: Caleb James DeLisle <cjd@cjdns.fr>
Link: https://patch.msgid.link/20260521174617.17692-1-mani@kernel.org
|
|
The CXL r4.0 8.2.4.17.7 RAS Capability Structure has total length 0x58
bytes (CXL_RAS_CAPABILITY_LENGTH); the Header Log occupies the trailing
64 bytes at offset 0x18. CXL_HEADERLOG_SIZE was defined as SZ_512,
eight times the actual on-device size.
header_log_copy() reads CXL_HEADERLOG_SIZE_U32 (128) dwords from the
RAS capability iomap, overrunning the 88-byte mapping by 448 bytes.
The cxl_aer_uncorrectable_error trace event memcpy()s CXL_HEADERLOG_SIZE
(512) bytes from its source. For the CPER caller the source is
struct cxl_ras_capability_regs::header_log[16] (64 bytes) embedded in a
stack-local cxl_cper_prot_err_work_data, so the memcpy reads 448 bytes
of kernel stack into the trace event ring buffer where userspace can
read it via tracefs.
Set CXL_HEADERLOG_SIZE to 64 and derive CXL_HEADERLOG_SIZE_U32 from it,
bringing all iomap readers into agreement on 16 dwords. Userspace tools
such as rasdaemon have grown a dependency on the buggy 512-byte (128 u32)
header_log layout in the cxl_aer_uncorrectable_error trace event. Add
CXL_HEADERLOG_TRACE_SIZE_U32 = 128 and use it for the trace event
__array and its memcpy to preserve that ABI. Both callers now pass a
zero-filled u32[CXL_HEADERLOG_TRACE_SIZE_U32] staging buffer with only
the first CXL_HEADERLOG_SIZE_U32 (16) entries populated from hardware;
the remaining 112 u32s are zero-padded, keeping the 512-byte trace ring
buffer layout intact.
[ dj: Replaced 64 with SZ_64 per RichardC ]
Fixes: 36f257e3b0ba ("acpi/ghes, cxl/pci: Process CXL CPER Protocol Errors")
Fixes: 2905cb5236cb ("cxl/pci: Add (hopeful) error handling support")
Cc: stable@vger.kernel.org
Reported-by: Sashiko
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ben Cheatham <benjamin.cheatham@amd.com>
Reviewed-by: Richard Cheng <icheng@nvidia.com>
Link: https://patch.msgid.link/20260605180610.2249458-1-terry.bowman@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
