| Age | Commit message (Collapse) | Author |
|---|
|
The WMI SMBIOS backend needs to access the its driver state container
when performing SMBIOS calls. Pass the device associated with a given
backend to the callback function to allow the WMI backend to retrieve
said state container in a more straightforward manner.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260720131921.368000-3-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
When unbinding the WMI driver while a userspace application has
an open file descriptor for the character device, a UAF occurs:
KASAN: slab-use-after-free in _copy_to_user from platform/x86/dell-smbios-wmi
The reason for this is that even after calling misc_deregister(),
userspace appications can still call read() and/or ioctl() on open
file descriptors associated with the already unregistered character
device. This causes a UAF by attempting to access the already freed
state container of the WMI driver.
Fix this by no longer storing the state container inside
filp->private_data. Instead retrieve the state container using
get_first_smbios_priv() and return -ENODEV if the state container
does not exist anymore.
Reported-by: Shuangpeng Bai <shuangpeng.kernel@gmail.com>
Closes: https://lore.kernel.org/platform-driver-x86/178144969601.60470.13396800403157907003@gmail.com/
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260720131921.368000-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
STB (Spill to DRAM) is an optional debugging facility that is only enabled
through the enable_stb module parameter. On some platforms the SMU refuses
the S2D setup outright, and on long-running systems the large telemetry
region can fail to ioremap. In either case amd_stb_s2d_init() returns an
error and, because probe treated that as fatal, the entire PMC driver
failed to load - silently disabling s0i3 support even though STB is only a
debug aid.
Downgrade the failure to a warning and continue probing so that s0i3
support via the LPS0 handler no longer depends on an optional debug
feature.
Since probe no longer aborts on this path, the LPS0 and debugfs unwinding
added by the earlier fix in this series becomes unreachable and is removed.
Reported-by: Francis De Brabandere <francisdb@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221759
Tested-by: Francis De Brabandere <francisdb@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260721181756.143084-7-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
amd_pmc_probe() registers the LPS0 s2idle handler with
acpi_register_lps0_dev() and creates the driver's debugfs directory before
calling amd_stb_s2d_init(), which is the last step in probe that can fail.
When amd_stb_s2d_init() fails (for example the S2D telemetry region cannot
be ioremapped on a long-running system, or the SMU rejects the S2D setup)
the error path only calls pci_dev_put() and returns. This leaves
amd_pmc_s2idle_dev_ops on the global lps0_s2idle_devops_head list and leaks
the debugfs directory, while the devm-managed resources backing the handler
are torn down.
Reloading the module then walks the corrupted list in
acpi_register_lps0_dev() and hits:
list_add corruption. next->prev should be prev, but was NULL.
kernel BUG at lib/list_debug.c:29!
acpi_register_lps0_dev+0x44/0x80
amd_pmc_probe+0x224/0x380 [amd_pmc]
platform_probe+0x67/0x90
Even without a reload, the stale registration means the next s2idle
transition calls into torn-down driver state.
Unwind the debugfs directory and the LPS0 registration on the
amd_stb_s2d_init() error path. acpi_unregister_lps0_dev() is safe to call
unconditionally here: it is guarded on the same conditions as
acpi_register_lps0_dev(), which is exactly what amd_pmc_remove() already
relies on.
Reported-by: Francis De Brabandere <francisdb@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221759
Tested-by: Francis De Brabandere <francisdb@gmail.com>
Fixes: 83ad6974dd3b ("platform/x86/amd/pmc: Move STB block into amd_pmc_s2d_init()")
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260721181756.143084-6-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
amd_stb_s2d_init() creates the v2 "stb_read" debugfs node before mapping
the telemetry buffer into dev->stb_virt_addr, leaving a window during probe
where a read faults on a NULL dev->stb_virt_addr in
amd_stb_debugfs_open_v2()/amd_stb_handle_efr().
This becomes trivial to hit once a failed STB init no longer aborts probe
(next patch), which leaves the node registered with a NULL buffer. Create
it only after dev->stb_virt_addr is mapped.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260721181756.143084-5-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
amd_stb_s2d_init() discards the return value of several S2D SMU commands.
When the SMU refuses a command (e.g. "SMU cmd failed. err: 0xff") the
failure is only noticed indirectly - if at all - and reported as -EIO,
masking the real error.
More seriously, the S2D_PHYS_ADDR_LOW/HIGH return values are ignored, so
on failure phys_addr_low/hi are left uninitialised and the assembled
address is passed straight to devm_ioremap(). When the SMU leaves them at
zero this maps physical address 0 and trips the ioremap-on-RAM warning:
amd_pmc AMDI000B:00: SMU cmd failed. err: 0xff
ioremap on RAM at 0x0000000000000000 - 0x0000000000ffffff
WARNING: CPU: 13 PID: 4592 at arch/x86/mm/ioremap.c:...
Check the return value of each SMU command and propagate it, and reject a
zero physical address before calling devm_ioremap().
Reported-by: Francis De Brabandere <francisdb@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221759
Tested-by: Francis De Brabandere <francisdb@gmail.com>
Fixes: 3d7d407dfb05 ("platform/x86: amd-pmc: Add support for AMD Spill to DRAM STB feature")
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260721181756.143084-4-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
amd_stb_debugfs_open_v2() switches dev->msg_port to MSG_PORT_S2D to query
S2D telemetry but only restores it to MSG_PORT_PMC on one path. The early
return on the dump_custom_stb path (and the error/allocation returns) leave
the port stuck on MSG_PORT_S2D, so subsequent SMU communication - including
the s2idle prepare/restore handlers - is directed at the wrong mailbox.
Consolidate the exit path through a single label so the message port is
always restored, mirroring the fix in amd_stb_s2d_init().
Reported-by: sashiko.dev
Link: https://sashiko.dev/#/patchset/20260717162023.956346-1-mario.limonciello%40amd.com
Fixes: 2851f4f8ed4e ("platform/x86/amd/pmc: Define enum for S2D/PMC msg_port and add helper function")
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260721181756.143084-3-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
dev->msg_port is switched to MSG_PORT_S2D before issuing the S2D SMU
commands but is only restored to MSG_PORT_PMC on the success path. The
early "return -EIO" and "return -ENOMEM" leave the port stuck on
MSG_PORT_S2D, so all subsequent SMU communication - including the s2idle
prepare/restore handlers - is directed at the wrong mailbox.
Consolidate the exit path through a single label so the message port is
always restored.
Fixes: 3d7d407dfb05 ("platform/x86: amd-pmc: Add support for AMD Spill to DRAM STB feature")
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260721181756.143084-2-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
After successfully configuring gpio pin as output, set the
requested initial output value via the existing gpio set
wrapper, so that the pin is not left at its previous level.
Fixes: 7671f4949a6c ("gpio: gpio-by-pinctrl: add pinctrl based generic GPIO driver")
Signed-off-by: Alex Tran <alex.tran@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260724-gpio-pinctrl-output-set-val-v2-1-cad55d025636@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Replace manual drm_bridge_remove()/mipi_dsi_detach() in remove with
devm_drm_bridge_add() and devm_mipi_dsi_attach() in probe. Also check
the return value from bridge registration.
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260521215228.188615-2-osama.abdelkader@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
Replace manual drm_bridge_remove()/mipi_dsi_detach() in remove with
devm_drm_bridge_add() and devm_mipi_dsi_attach() in probe. Also check
the return value from bridge registration.
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260521215228.188615-1-osama.abdelkader@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
The ICM USB4 switch operation request encodes two values in
request.data_len_valid: bit 4 marks the data payload valid, while bits
3:0 hold the payload length in dwords. A zero length with the valid bit
set represents the full 16-dword data array.
icm_usb4_switch_op() sets the valid bit when a transmit payload is
present. For payloads shorter than the full 16 dwords, it then assigns
the length to the whole field and clears the valid bit that was just set.
The payload is still copied into the request, but the descriptor sent to
firmware marks that data as invalid.
This affects USB4 router operations that send short payloads through the
firmware connection manager. In particular, USB4 NVM writes can send a
short final block when the image size is not aligned to the 64-byte proxy
payload size. Firmware may then ignore or reject that final block, while
full 16-dword blocks are unaffected because they are encoded as length 0
with the valid bit set.
OR the short payload length into data_len_valid so the valid bit is
preserved.
Fixes: 9039387e166e ("thunderbolt: Add USB4 router operation proxy for firmware connection manager")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
When a VRAM buffer object is marked as DONTNEED, like in Mesa, the
driver skips migrating its contents to system memory and instead purges
the backing store during eviction (via xe_ttm_bo_purge).
However, xe_evict_flags() still returns tt_placement (XE_PL_TT) for VRAM
BOs even if they were marked DONTNEED. This causes
ttm_bo_handle_move_mem() to always call ttm_bo_populate() to allocate
destination system pages, only for those pages to be immediately freed
right after when xe_bo_move() calls xe_ttm_bo_purge().
Fix this by changing xe_evict_flags() to return sys_placement
(XE_PL_SYSTEM) for DONTNEED BOs. This causes TTM to skip the population
step while still ensuring that TTM calls xe_bo_move(), so
xe_ttm_bo_purge() still triggers.
v2 (Thomas):
- Add a comment to highlight why sys_placement over purge_placement.
Assisted-by: Copilot:gemini-3.1-pro-preview
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Maarten Lankhorst <dev@lankhorst.se>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260723161542.1220276-2-matthew.auld@intel.com
|
|
Service drivers may register local XDomain properties while discovery is
still in progress. This can cause the properties changed notification to be
sent before the peer is ready to act on it.
If the peer has already read the local property block before the service
was registered, it may keep using the old property generation and miss the
newly registered service. With ThunderboltIP this can leave the network
service half-discovered after a warm reboot and the login request
eventually times out.
Queue another properties changed notification after the XDomain reaches
ENUMERATED so the peer can re-read the final local properties.
Signed-off-by: Milo Chen <cmh79479@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
The usual style for other device id arrays doesn't have a comma after
the initializer.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
tb_service_probe() calls the driver's probe function unconditionally.
Check at driver register time that this callback is valid to prevent a
NULL pointer exception.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
No driver makes use of that parameter, so drop it and don't spend the
effort to determine the matching entry.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
On shutdown the connection manager tears down the router tree without
signalling connected devices. A Thunderbolt 3 device directly connected
to a USB4 host never receives a disconnect indication and during shutdown
this can cause polling the dead link for up to 60 seconds. On some
platforms this behavior leads to a warm reset instead of a shutdown due
to this timeout.
Fix this by asserting PORT_CS_19.DPR on each connected downstream port
before tearing down the router tree. This drives SBTX low (USB4 spec
section 6.9), causing the device to detect SBRX low and transition to
Uninitialized Unplugged state immediately.
Always do this on system shutdown/reboot by forcing host_reset in the
PCI ->shutdown callback. On plain driver unload only do it when the host
router was actually reset on load (host_reset=1), since in that case the
tunnels are not preserved across reload anyway; with host_reset=0 the
tunnels are kept alive across unload/reload so the links are left intact.
Restrict the reset to Thunderbolt 3 devices.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Co-developed-by: Sanath S <Sanath.S@amd.com>
Signed-off-by: Sanath S <Sanath.S@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
tb_drom_parse_entry_port() validates the device-supplied header->index
against sw->config.max_port_number before indexing sw->ports[], but the
sibling field entry->dual_link_port_nr -- a 6-bit value also read from
the DROM -- indexes the same array with no such check. A malicious or
malformed Thunderbolt device can set dual_link_port_nr beyond the
allocated sw->ports[] (max_port_number + 1 entries), producing an
out-of-bounds tb_port pointer that is stored and later dereferenced.
Reject a port entry whose dual_link_port_nr exceeds max_port_number,
the same bound already applied to header->index.
Fixes: cd22e73bdf5e ("thunderbolt: Read port configuration from eeprom.")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Valid bandwidth group IDs range from 1 through MAX_GROUPS, while Group
ID 0 is reserved. tb_consumed_dp_bandwidth() uses the Group ID directly
to index its local group_reserved[] array.
The array currently has MAX_GROUPS entries, so its valid indices are 0
through MAX_GROUPS - 1. Group ID MAX_GROUPS therefore accesses one
element past the end, and the final group's reserved bandwidth is not
included when the array is summed.
Give group_reserved[] MAX_GROUPS + 1 entries so direct Group ID
indexing covers the reserved ID 0 and valid IDs 1 through MAX_GROUPS.
Fixes: 52a4490e89d7 ("thunderbolt: Reserve released DisplayPort bandwidth for a group for 10 seconds")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
The size passed to dma_unmap_page() must match the size used for the
corresponding dma_map_page() call.
Stream RX and TX buffers are mapped with TB_MAX_FRAME_SIZE when the
buffer pools are allocated. However, tbstream_ring_free() currently uses
tb_ring_frame_size() as the unmap size.
That helper returns the current frame payload size, not the DMA mapping
size. On the TX path, tbstream_dev_alloc_tx() stores a shorter payload
length in frame.size when the payload is smaller than TB_MAX_FRAME_SIZE.
This happens for a short final DATA frame, and also for the CLOSE frame,
which is allocated with SZ_256.
In those cases the buffer was mapped with TB_MAX_FRAME_SIZE, but
tb_ring_frame_size() returns the shorter frame payload length. This makes
the dma_unmap_page() size differ from the original dma_map_page() size.
Use TB_MAX_FRAME_SIZE when unmapping stream buffers so the unmap size
matches the DMA mapping size used by the buffer allocation paths.
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Fixes: 6db21d817b43 ("thunderbolt: Add support for USB4STREAM")
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
The i.MX8QXP SCU clock driver manually attaches power domains to each
clock device via of_genpd_add_device() in imx_clk_scu_attach_pd().
If the SCU power domain provider has not probed yet, the attachment
fails silently with a pr_warn() and the clock device is registered
without a power domain.
When both drivers are built as modules, there is no implicit
dependency to guarantee load order. Add MODULE_SOFTDEP("pre:
scu_pd") so that modprobe loads the SCU power domain module
before the clock module.
Signed-off-by: Zhipeng Wang <zhipeng.wang_1@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
Convert CONFIG_IMX_SCU_PD from bool to tristate to allow building as a
loadable module. This is needed on Android devices using the Generic
Kernel Image (GKI), where SoC-specific drivers must be built as modules
rather than built into the core kernel image.
For i.MX8Q devices running Android with a GKI kernel, the SCU power
domain driver must be loadable. Without tristate support, power domains
cannot be properly initialized, preventing these systems from
functioning under GKI.
Use subsys_initcall() so that when built-in the power domain provider
probes before its consumers (e.g. the SCU clock driver at
device_initcall level), fixing "failed to attached the power domain"
warnings at boot. When built as a module, subsys_initcall() is
equivalent to module_init(). No module_exit() is provided because the
SCU power domain provider is a system-level resource that cannot be
safely removed at runtime.
Add MODULE_DEVICE_TABLE() for OF-based module autoloading.
Signed-off-by: Zhipeng Wang <zhipeng.wang_1@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
of_stdout is declared extern in include/linux/of.h alongside of_root
and of_chosen, but unlike those two it is not exported, preventing
modules from referencing it.
Export it with EXPORT_SYMBOL_GPL() so drivers that need the stdout
device node can be built as modules.
Signed-off-by: Zhipeng Wang <zhipeng.wang_1@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
Merge the pmdomain fixes for v7.2-rc[n] into the next branch, to allow
them to get tested together with the pmdomain changes that are targeted
for the next release.
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
scpsys_get_bus_protection_legacy() looks up several legacy bus
protection regmaps from device-tree nodes.
Two error paths put the device node before checking whether the regmap
lookup failed, but still pass that node to dev_err_probe() with %pOF on
failure. If of_node_put() drops the last reference, the later %pOF
formatting can dereference a freed device node.
Keep the node reference until after the error message has been emitted in
the infracfg and SMI lookup paths. Also drop the SMI node before
returning when the SMI phandle is missing.
Fixes: c29345fa5f66 ("pmdomain: mediatek: Refactor bus protection regmaps retrieval")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
Both branches of the check return the same value, so the check has
no effect. Remove it and return the value directly.
This is the result of running the Coccinelle script from
scripts/coccinelle/misc/cond_return_no_effect.cocci.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Convert the Kconfig option of every MediaTek pinctrl SoC driver from bool
to tristate and add MODULE_DESCRIPTION()/MODULE_LICENSE() so that they can
be built as loadable kernel modules.
This is required for Android GKI + vendor_dlkm deployments, where
vendor-specific drivers must be kept separate from the GKI vmlinux and
loaded as modules from the vendor partition.
Signed-off-by: Justin Yeh <justin.yeh@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
[linusw@kernel.org: Rebased and added MT6858]
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
The DSI attach error path calls drm_panel_remove() by hand even though
the panel was registered with devm_drm_panel_add(), which already
arranges for drm_panel_remove() to run on driver detach. When
mipi_dsi_attach() fails the panel is therefore removed twice: once
directly and once again while devres unwinds.
drm_panel_add() takes a reference and drm_panel_remove() drops one, so
the extra removal releases the last reference early and frees the panel
container. The put registered by devm_drm_panel_alloc() then operates on
freed memory, resulting in a use-after-free and a reference-count
underflow when a DSI host rejects the requested configuration during
probe.
Drop the manual drm_panel_remove() and let the managed cleanup handle
it, matching the other dual-DSI panel drivers.
Fixes: 75a5dbd1f4f7 ("drm/panel: Add Novatek NT36536 panel driver")
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Pengyu Luo <mitltlatltl@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260724041746.12887-1-devnexen@gmail.com
|
|
Add support for the Ampire AM-800480N3TZQW-00H 5" WVGA TFT LCD panel.
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260723-support-am-800480n3tzqw-00h-v1-2-6a4ae0575a19@bootlin.com
|
|
Add support for the lower (secondary) panel of the AYANEO Pocket DS, a
dual-screen QCS8550 (Snapdragon 8 Gen 2) handheld. It is a 5.0" 1024x768
4:3 IPS LCD driven by a Sitronix ST7703 DDIC: every command in the vendor
init sequence maps to an ST7703 manufacturer command (SETEXTC, SETMIPI,
SETRGBIF, SETSCR, SETPOWER, SETGAMMA, SETGIP1/2), and the SETMIPI and
SETRGBIF payloads are near-identical to the already-supported Powkiddy
RGB10MAX3.
The panel is mounted in portrait (768x1024) and rotated 270 degrees in
the device, expressed through the panel rotation property. The SETEXTC
unlock password ends in 0x87 rather than the canonical 0x83; this is the
value shipped by the vendor firmware and is kept verbatim.
Init sequence extracted from the AYANEO Pocket DS BSP kernel, via the
ROCKNIX SM8550 port.
Signed-off-by: Alexandre Hamamdjian <azkali.limited@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260723-b4-st7703-pocketds-lower-v1-2-e3db246589f4@gmail.com
|
|
The DCLTek dt300250 is a LCD panel using the jd9365da controller.
Add the panel to the driver.
Suggested-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Marc-Olivier Champagne <marc-olivier.champagne@savoirfairelinux.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260722173840.3576444-5-marc-olivier.champagne@savoirfairelinux.com
|
|
The JD9365DA-H3 uses DSI LPM for command transmissions, make sure
this is configured correctly in the DSI mode flags.
Suggested-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Marc-Olivier Champagne <marc-olivier.champagne@savoirfairelinux.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260722173840.3576444-2-marc-olivier.champagne@savoirfairelinux.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground into gpio/for-next
gpio: legacy interface cleanups for 7.3
These are the remaining patches for legacy gpio interface
cleanup, ensuring that files referencing them are sure to
have CONFIG_GPIOLIB_LEGACY set, and use linux/gpio/legacy.h
instead of the old linux/gpio.h header.
There are a few more patches already merged in other
branches for 7.3, including soc, led, net and media. Once
everything is in, we can apply the final patches to turn
off CONFIG_GPIOLIB_LEGACY by default and remove the obsolete
header file.
This branch is based on the immutable ib-mfd-legacy-gpio-7.3
branch from mfd.git to avoid a conflict in the rohm drivers.
|
|
New HW no longer implements a separate class for latency-sensitive QPs and
advertises this by a new cap bit.
REG_UMR is the only QP that used this feature, so gate its usage of the
feature on this cap.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260726-deprecate-lat-qps-v2-2-5e0c2ee55046@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
We need the staging driver fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the serial driver fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
New HW no longer implements a separate class for latency-sensitive QPs
and advertises this by a new cap bit.
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
set_user_buf_size() computes the QP buffer size by left-shifting the
user-supplied rq.wqe_cnt and rq.wqe_shift values as signed integers.
A sufficiently large rq.wqe_cnt causes signed integer overflow, which
is undefined behavior, and yields a small or negative buf_size, causing
ib_umem_get() to map a buffer smaller than the hardware will actually
write into.
Replace the shifts and addition with check_shl_overflow() and
check_add_overflow(), rejecting invalid user inputs.
Moreover, guard the identical shift computing qp->sq.offset in
_create_user_qp() before set_user_buf_size() is reached.
Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260723-fix-qp-buf-size-overflow-v1-1-ccb05ee43a7b@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Decouple RoCE acceleration counters exposure from the roce_accl device
cap. The device cap is intended to protect the access to the roce_accl
register and was disabled on VFs for that purpose.
Reading the acceleration counters, however, does not involve that
register, the counters are read-only statistics that carry no
configuration risk. Gating their exposure on the capability therefore
needlessly hides useful diagnostic data on VFs.
Expose the counters on all functions regardless of the capability.
Signed-off-by: Michael Gur <michaelgur@nvidia.com>
Reviewed-by: Chiara Meiohas <cmeiohas@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260723-expose-roce-accl-counters-v1-1-967618b550cd@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The UMR XLT buffer needs to be aligned to PAGE_SIZE.
Fixes: b2022068dea0 ("RDMA/mlx5: use kmalloc() for UMR translation buffers")
Link: https://patch.msgid.link/20260722-fix-get-order-alignment-v1-1-ece212ddb5dc@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
Add NOUVEAU_FIFO_ENGINE_NVDEC to the abi16 uAPI and accept it in
channel allocation, mapping it to the NVDEC engine runlist.
Skip the Turing copy-engine workaround object for NVDEC channels: the
copy engines are not part of the NVDEC runlist, so the workaround
object cannot be instantiated on such channels (and is not needed
there).
This is required for NVK to implement Vulkan Video H.264 decode on top
of the NVDEC engine:
https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/31867
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260725035912.1016464-1-daniel.almeida@collabora.com
|
|
When traversing internal block structures of a descriptor in
fw_core_add_descriptor(), each sub-block header specifies its own length
in the upper 16 bits of its header quadlet.
If a malformed or corrupted descriptor provides a sub-block length that
exceeds the remaining total length of the descriptor buffer, the parsing
loop advances past the allocated boundary of desc->data, leading to an
out-of-bounds read access.
Validate each sub-block's length against the remaining descriptor size
before advancing the offset pointer to ensure loop bounds safety.
Signed-off-by: Sreeraj S Kurup <sreekuttan2156239@gmail.com>
Link: https://lore.kernel.org/r/20260725155255.3054-3-sreekuttan2156239@gmail.com
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
In fw_core_add_descriptor(), incoming descriptor structures are processed
without checking whether the descriptor's specified length falls within
valid boundaries. An empty descriptor (length 0) or an oversized descriptor
exceeding the IEEE 1394 Config ROM capacity can lead to invalid processing.
Add bounds checking at the start of fw_core_add_descriptor() using the
in_range() helper macro to reject descriptors with length 0 or length
exceeding 256 quadlets (the standard maximum Configuration ROM size).
Signed-off-by: Sreeraj S Kurup <sreekuttan2156239@gmail.com>
Link: https://lore.kernel.org/r/20260725155255.3054-2-sreekuttan2156239@gmail.com
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
stm32_rng_probe() enables autosuspend and runtime PM before registering the
hwrng. If devm_hwrng_register() fails, probe returns with runtime PM left
enabled and autosuspend still selected.
The remove callback also only disables runtime PM and does not undo
pm_runtime_use_autosuspend().
Use devm_pm_runtime_enable() so runtime PM is unwound automatically on
probe failure and driver detach. Since the managed cleanup also disables
runtime PM,drop the remove callback.
Fixes: c6a97c42e399 ("hwrng: stm32 - add support for STM32 HW RNG")
Cc: stable@vger.kernel.org
Signed-off-by: Can Peng <pengcan@kylinos.cn>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
hlf_q_num is set but never read; drop the field and its assignment.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
sec_create_qp_ctx() reads ctx->type_supported to pick its callback, but
sec_skcipher_init() and sec_aead_init() set it after sec_ctx_base_init()
has already walked the qp_ctx loop, so the value is uninitialized when
first consumed. Set type_supported in sec_ctx_base_init() before the
loop; the alg init paths now just select req_op from it.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Since commit 55b48e23f5c4 ("genirq/devres: Add error handling in
devm_request_*_irq()"), devm_request_threaded_irq() automatically logs
detailed error messages on failure. Remove the now-redundant
driver-specific dev_err() calls.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Acked-by: Maxime Méré <maxime.mere@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Since commit 55b48e23f5c4 ("genirq/devres: Add error handling in
devm_request_*_irq()"), devm_request_irq() automatically logs
detailed error messages on failure. Remove the now-redundant
driver-specific dev_err() calls.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
