| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
- fix assorted (harmless) off-by-one errors
- we were inconsistent on whether out->pos stays <= out->size on
overflow; now it does, and printbuf.overflow exists to indicate if a
printbuf has overflowed
- factor out printbuf_advance_pos()
- printbuf_nul_terminate_reserved(); use this to reduce the number of
printbuf_make_room() calls
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We need to be able to test these paths in dry run mode.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When a superblock write is silently dropped or it's been modified by
another process we need to know which device it was.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Fix another shift-by-64 by factoring out a common helper for
bch2_bkey_format_invalid() and bformat_needs_redo() (where it was
already fixed).
Reported-by: syzbot+9833a1d29d4a44361e2c@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Btree nodes are log structured; thus, we need to emit whiteouts when
we're deleting a key that's been written out to disk.
k->needs_whiteout tracks whether a key will need a whiteout when it's
deleted, and this requires some careful handling; e.g. the key we're
deleting may not have been written out to disk, but it may have
overwritten a key that was - thus we need to carry this flag around on
overwrites.
Invariants:
There may be multiple key for the same position in a given node (because
of overwrites), but only one of them will be a live (non deleted) key,
and only one key for a given position will have the needs_whiteout flag
set.
Additionally, we don't want to carry around whiteouts that need to be
written in the main searchable part of a btree node - btree_iter_peek()
will have to skip past them, and this can lead to an O(n^2) issues when
doing sequential deletions (e.g. inode rm/truncate). So there's a
separate region in the btree node buffer for unwritten whiteouts; these
are merge sorted with the rest of the keys we're writing in the btree
node write path.
The unwritten whiteouts was a later optimization that bch2_sort_keys()
didn't take into account; the unwritten whiteouts area means that we
never have deleted keys with needs_whiteout set in the main searchable
part of a btree node.
That means we can simplify and optimize some sort paths, and eliminate
an assertion that syzbot found:
- Unless we're in the btree node write path, it's always ok to drop
whiteouts when sorting
- When sorting for a btree node write, we drop the whiteout if it's not
from the unwritten whiteouts area, or if it's overwritten by a real
key at the same position.
This completely eliminates some tricky logic for propagating the
needs_whiteout flag: syzbot was able to hit the assertion that checked
that there shouldn't be more than one key at the same pos with
needs_whiteout set, likely due to a combination of flipping on
needs_whiteout on all written keys (they need whiteouts if overwritten),
combined with not always dropping unneeded whiteouts, and the tricky
logic in the sort path for preserving needs_whiteout that wasn't really
needed.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Pull smb server fixes from Steve French:
"Five ksmbd server fixes, all also for stable
- Three fixes related to SMB3 leases (fixes two xfstests, and a
locking issue)
- Unitialized variable fix
- Socket creation fix when bindv6only is set"
* tag '6.9-rc7-ksmbd-fixes' of git://git.samba.org/ksmbd:
ksmbd: do not grant v2 lease if parent lease key and epoch are not set
ksmbd: use rwsem instead of rwlock for lease break
ksmbd: avoid to send duplicate lease break notifications
ksmbd: off ipv6only for both ipv4/ipv6 binding
ksmbd: fix uninitialized symbol 'share' in smb2_tree_connect()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
"Two one-liner fixes for issues introduced in -rc1"
* tag 'fuse-fixes-6.9-final' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
virtiofs: include a newline in sysfs tag
fuse: verify zero padding in fuse_backing_map
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat fixes from Namjae Jeon:
- Fix xfstests generic/013 test failure with dirsync mount option
- Initialize the reserved fields of deleted file and stream extension
dentries to zero
* tag 'exfat-for-6.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: zero the reserved fields of file and stream extension dentries
exfat: fix timing of synchronizing bitmap and inode
|
|
Merely checking if the directory is encrypted happens for every open
when using ext4, at the moment refing and unrefing the parent, costing 2
atomics and serializing opens of different files.
The most common case of encryption not being used can be checked for
with RCU instead.
Sample result from open1_processes -t 20 ("Separate file open/close")
from will-it-scale on Sapphire Rapids (ops/s):
before: 12539898
after: 25575494 (+103%)
v2:
- add a comment justifying rcu usage, submitted by Eric Biggers
- whack spurious IS_ENCRYPTED check from the refed case
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20240508081400.422212-1-mjguzik@gmail.com
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Pull bcachefs fixes from Kent Overstreet:
- Various syzbot fixes; mainly small gaps in validation
- Fix an integer overflow in fiemap() which was preventing filefrag
from returning the full list of extents
- Fix a refcounting bug on the device refcount, turned up by new
assertions in the development branch
- Fix a device removal/readd bug; write_super() was repeatedly dropping
and retaking bch_dev->io_ref references
* tag 'bcachefs-2024-05-07.2' of https://evilpiepirate.org/git/bcachefs:
bcachefs: Add missing sched_annotate_sleep() in bch2_journal_flush_seq_async()
bcachefs: Fix race in bch2_write_super()
bcachefs: BCH_SB_LAYOUT_SIZE_BITS_MAX
bcachefs: Add missing skcipher_request_set_callback() call
bcachefs: Fix snapshot_t() usage in bch2_fs_quota_read_inode()
bcachefs: Fix shift-by-64 in bformat_needs_redo()
bcachefs: Guard against unknown k.k->type in __bkey_invalid()
bcachefs: Add missing validation for superblock section clean
bcachefs: Fix assert in bch2_alloc_v4_invalid()
bcachefs: fix overflow in fiemap
bcachefs: Add a better limit for maximum number of buckets
bcachefs: Fix lifetime issue in device iterator helpers
bcachefs: Fix bch2_dev_lookup() refcounting
bcachefs: Initialize bch_write_op->failed in inline data path
bcachefs: Fix refcount put in sb_field_resize error path
bcachefs: Inodes need extra padding for varint_decode_fast()
bcachefs: Fix early error path in bch2_fs_btree_key_cache_exit()
bcachefs: bucket_pos_to_bp_noerror()
bcachefs: don't free error pointers
bcachefs: Fix a scheduler splat in __bch2_next_write_buffer_flush_journal_buf()
|
|
Introduce the capability to dynamically configure the maximum file
note size for ELF core dumps via sysctl.
Why is this being done?
We have observed that during a crash when there are more than 65k mmaps
in memory, the existing fixed limit on the size of the ELF notes section
becomes a bottleneck. The notes section quickly reaches its capacity,
leading to incomplete memory segment information in the resulting coredump.
This truncation compromises the utility of the coredumps, as crucial
information about the memory state at the time of the crash might be
omitted.
This enhancement removes the previous static limit of 4MB, allowing
system administrators to adjust the size based on system-specific
requirements or constraints.
Eg:
$ sysctl -a | grep core_file_note_size_limit
kernel.core_file_note_size_limit = 4194304
$ sysctl -n kernel.core_file_note_size_limit
4194304
$echo 519304 > /proc/sys/kernel/core_file_note_size_limit
$sysctl -n kernel.core_file_note_size_limit
519304
Attempting to write beyond the ceiling value of 16MB
$echo 17194304 > /proc/sys/kernel/core_file_note_size_limit
bash: echo: write error: Invalid argument
Signed-off-by: Vijay Nag <nagvijay@microsoft.com>
Signed-off-by: Allen Pais <apais@linux.microsoft.com>
Link: https://lore.kernel.org/r/20240506193700.7884-1-apais@linux.microsoft.com
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Upon running sparse, "warning: dubious: x & !y" is output at an array
index calculation within nilfs_load_super_block().
The calculation is not wrong, but to eliminate the sparse warning, replace
it with an equivalent calculation.
Also, add a comment to make it easier to understand what the unintuitive
array index calculation is doing and whether it's correct.
Link: https://lkml.kernel.org/r/20240430080019.4242-3-konishi.ryusuke@gmail.com
Fixes: e339ad31f599 ("nilfs2: introduce secondary super block")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Nobody checks the error flag on squashfs folios, so stop setting it.
Link: https://lkml.kernel.org/r/20240420025029.2166544-24-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Phillip Lougher <phillip@squashfs.org.uk>
Reviewed-by: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Remove use of page APIs, return the errno instead of 0, switch from
kmap_atomic to kmap_local and use folio_end_read() to unify the two exit
paths.
Link: https://lkml.kernel.org/r/20240420025029.2166544-23-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Phillip Lougher <phillip@squashfs.org.uk>
Reviewed-by: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Variable status is being assigned and error code that is never read, it is
being assigned inside of a do-while loop. The assignment is redundant and
can be removed.
Cleans up clang scan build warning:
fs/ocfs2/dlm/dlmdomain.c:1530:2: warning: Value stored to 'status' is never
read [deadcode.DeadStores]
Link: https://lkml.kernel.org/r/20240423223018.1573213-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Heming Zhao <heming.zhao@suse.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Convert nilfs2 to use the new mount API.
[sandeen@redhat.com: v2]
Link: https://lkml.kernel.org/r/33d078a7-9072-4d8e-a3a9-dec23d4191da@redhat.com
Link: https://lkml.kernel.org/r/20240425190526.10905-1-konishi.ryusuke@gmail.com
[konishi.ryusuke: fixed missing SB_RDONLY flag repair in nilfs_reconfigure]
Link: https://lkml.kernel.org/r/33d078a7-9072-4d8e-a3a9-dec23d4191da@redhat.com
Link: https://lkml.kernel.org/r/20240424182716.6024-1-konishi.ryusuke@gmail.com
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Only four lcluster types here, remove redundant code.
No real logic changes.
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240508123357.3266173-1-hsiangkao@linux.alibaba.com
|
|
Use the superblock's UUID to generate the fsid when it's non-null.
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Hongzhen Luo <hongzhen@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240409113022.74720-1-hongzhen@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
This adds a special global buffer pool (in the end) for reserved pages.
Using a reserved pool for LZ4 decompression significantly reduces the
time spent on extra temporary page allocation for the extreme cases in
low memory scenarios.
The table below shows the reduction in time spent on page allocation for
LZ4 decompression when using a reserved pool. The results were obtained
from multi-app launch benchmarks on ARM64 Android devices running the
5.15 kernel with an 8-core CPU and 8GB of memory. In the benchmark, we
launched 16 frequently-used apps, and the camera app was the last one in
each round. The data in the table is the average time of camera app for
each round.
After using the reserved pool, there was an average improvement of 150ms
in the overall launch time of our camera app, which was obtained from
the systrace log.
+--------------+---------------+--------------+---------+
| | w/o page pool | w/ page pool | diff |
+--------------+---------------+--------------+---------+
| Average (ms) | 3434 | 21 | -99.38% |
+--------------+---------------+--------------+---------+
Based on the benchmark logs, 64 pages are sufficient for 95% of
scenarios. This value can be adjusted with a module parameter
`reserved_pages`. The default value is 0.
This pool is currently only used for the LZ4 decompressor, but it can be
applied to more decompressors if needed.
Signed-off-by: Chunhai Guo <guochunhai@vivo.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240402131523.2703948-1-guochunhai@vivo.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Let's use alloc_pages_bulk_array() for simplicity and get rid of
unnecessary pagepool.
Signed-off-by: Chunhai Guo <guochunhai@vivo.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240402092757.2635257-1-guochunhai@vivo.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
It will cost more time if compressed buffers are allocated on demand for
low-latency algorithms (like lz4) so EROFS uses per-CPU buffers to keep
compressed data if in-place decompression is unfulfilled. While it is kind
of wasteful of memory for a device with hundreds of CPUs, and only a small
number of CPUs concurrently decompress most of the time.
This patch renames it as 'global buffer pool' and makes it configurable.
This allows two or more CPUs to share a common buffer to reduce memory
occupation.
Suggested-by: Gao Xiang <xiang@kernel.org>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Chunhai Guo <guochunhai@vivo.com>
Link: https://lore.kernel.org/r/20240402100036.2673604-1-guochunhai@vivo.com
Signed-off-by: Sandeep Dhavale <dhavale@google.com>
Link: https://lore.kernel.org/r/20240408215231.3376659-1-dhavale@google.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Currently, utils.c is only useful if CONFIG_EROFS_FS_ZIP is on.
So let's rename it to zutil.c as well as avoid its inclusion if
CONFIG_EROFS_FS_ZIP is explicitly disabled.
Signed-off-by: Chunhai Guo <guochunhai@vivo.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240401135550.2550043-1-guochunhai@vivo.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
This adds support for the FS_IOC_ENABLE_VERITY and FS_IOC_MEASURE_VERITY
ioctls. The FS_IOC_READ_VERITY_METADATA is missing but from the
documentation, "This is a fairly specialized use case, and most fs-verity
users won’t need this ioctl."
Signed-off-by: Richard Fung <richardfung@google.com>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
The internal tag string doesn't contain a newline. Append one when
emitting the tag via sysfs.
[Stefan] Orthogonal to the newline issue, sysfs_emit(buf, "%s", fs->tag) is
needed to prevent format string injection.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Fixes: a8f62f50b4e4 ("virtiofs: export filesystem tags through sysfs")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Nobody checks the error flag on fuse folios, so stop setting it.
Optimise the (optional) setting of the uptodate flag and clearing
of the lock flag by using folio_end_read().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
In ext4_xattr_block_cache_find(), when ext4_sb_bread() returns an error,
we will either continue to find the next ea block or return NULL to try to
insert a new ea block. But whether ext4_sb_bread() returns -EIO or -ENOMEM,
the next operation is most likely to fail with the same error. So propagate
the error returned by ext4_sb_bread() to make ext4_xattr_block_set() fail
to reduce pointless operations.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240504075526.2254349-3-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Syzbot reports a warning as follows:
============================================
WARNING: CPU: 0 PID: 5075 at fs/mbcache.c:419 mb_cache_destroy+0x224/0x290
Modules linked in:
CPU: 0 PID: 5075 Comm: syz-executor199 Not tainted 6.9.0-rc6-gb947cc5bf6d7
RIP: 0010:mb_cache_destroy+0x224/0x290 fs/mbcache.c:419
Call Trace:
<TASK>
ext4_put_super+0x6d4/0xcd0 fs/ext4/super.c:1375
generic_shutdown_super+0x136/0x2d0 fs/super.c:641
kill_block_super+0x44/0x90 fs/super.c:1675
ext4_kill_sb+0x68/0xa0 fs/ext4/super.c:7327
[...]
============================================
This is because when finding an entry in ext4_xattr_block_cache_find(), if
ext4_sb_bread() returns -ENOMEM, the ce's e_refcnt, which has already grown
in the __entry_find(), won't be put away, and eventually trigger the above
issue in mb_cache_destroy() due to reference count leakage.
So call mb_cache_entry_put() on the -ENOMEM error branch as a quick fix.
Reported-by: syzbot+dd43bd0f7474512edc47@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=dd43bd0f7474512edc47
Fixes: fb265c9cb49e ("ext4: add ext4_sb_bread() to disambiguate ENOMEM cases")
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240504075526.2254349-2-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The variable err is being assigned a value that is never read, it
is being re-assigned inside the following while loop and also
after the while loop. The assignment is redundant and can be
removed.
Cleans up clang scan build warning:
fs/jbd2/commit.c:574:2: warning: Value stored to 'err' is never
read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240410112803.232993-1-colin.i.king@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
__filemap_get_folio() with FGP_WRITEBEGIN parameter has already wait
for stable folio, so remove the redundant folio_wait_stable() in
ext4_da_write_begin(), it was left over from the commit cc883236b792
("ext4: drop unnecessary journal handle in delalloc write") that
removed the retry getting page logic.
Fixes: cc883236b792 ("ext4: drop unnecessary journal handle in delalloc write")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240419023005.2719050-1-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Smatch complains "err" can be uninitialized in the caller.
fs/ext4/indirect.c:349 ext4_alloc_branch()
error: uninitialized symbol 'err'.
Set the error to zero on the success path.
Fixes: 8016e29f4362 ("ext4: fast commit recovery path")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/363a4673-0fb8-4adf-b4fb-90a499077276@moroto.mountain
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This just carries around the bd_buddy_folio so should also be a folio.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20240416172900.244637-6-willy@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This just carries around the bd_bitmap_folio so should also be a folio.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20240416172900.244637-5-willy@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
All callers now have a folio, so convert this function from operating on
a page to operating on a folio. The folio is assumed to be a single page.
Signe-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20240416172900.244637-4-willy@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
There is no need to make this a multi-page folio, so leave all the
infrastructure around it in pages. But since we're locking it, playing
with its refcount and checking whether it's uptodate, it needs to move
to the folio API.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20240416172900.244637-3-willy@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
There is no need to make this a multi-page folio, so leave all the
infrastructure around it in pages. But since we're locking it, playing
with its refcount and checking whether it's uptodate, it needs to move
to the folio API.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20240416172900.244637-2-willy@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The "i++" was accidentally left out so it just sets qgids[0] over and
over.
This can lead to unexpected problems, as the groups[1:] would be all 0,
leading to later find_qgroup_rb() unable to find a qgroup and cause
snapshot creation failure.
Fixes: 5343cd9364ea ("btrfs: qgroup: simple quota auto hierarchy for nested subvolumes")
CC: stable@vger.kernel.org # 6.7+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
error state
Currently the error status of super block write is tracked in page/folio
status bit Error. For that we need to keep the reference for the whole
duration of write and wait.
Count the number of superblock writeback errors in the btrfs_device.
That means we don't need the folio to stay around until it's waited for,
and can avoid the extra call to folio_get/put.
Also remove a mention of PageError in a comment as it's the last mention
of the page Error state.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Iterate over folios instead of bvecs. Switch the order of unlock and put
to be the usual order; we know this folio can't be put until it's been
waited for, but that's fragile. Remove the calls to ClearPageUptodate /
SetPageUptodate -- if PAGE_SIZE is larger than BTRFS_SUPER_INFO_SIZE,
we'd be marking the entire folio uptodate without having actually
initialised all the bytes in the page.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This is a direct conversion from pages to folios, assuming single page
folio. Also removes some calls to obsolete APIs and some hidden calls to
compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This is a direct conversion from pages to folios, assuming single page
folio. Also removes a few calls to compound_head() and calls to
obsolete APIs.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Remove duplicate included header file linux/blkdev.h .
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that we have the lock_extent tightly coupled with
extent_clear_unlock_delalloc we can add a cached state to
extent_clear_unlock_delalloc and benefit from skipping the extra lookup
when we're doing cow.
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We don't need to include the time we spend in the allocator under our
extent lock protection, move it after the allocator and make sure we
lock the extent in the error case to ensure we're not clearing these
bits without the extent lock held.
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that we've got the extent lock pushed into cow_file_range() we can
push it further down into the allocation loop. This allows us to only
hold the extent lock during the dropping of the extent map range and
inserting the ordered extent.
This makes the error case a little trickier as we'll now have to lock
the range before clearing any of the other extent bits for the range,
but this is the error path so is less performance critical.
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
These checks aren't reliant on the extent lock. Move this up into
cow_file_range_inline(), and then update encoded writes to call this
check before calling __cow_file_range_inline(). This will allow us to
skip the extent lock if we're not able to inline the given extent.
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that we've pushed the lock_extent() into cow_file_range() we can
push the extent locking into cow_file_range_inline() and move the
lock_extent in cow_file_range() to after we call
cow_file_range_inline().
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that cow_file_range is the only function that is called with the
range locked, push this call into cow_file_range so we can further
narrow the scope.
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
