| Age | Commit message (Collapse) | Author |
|---|
|
Now that the SMB client accesses MD5, HMAC-MD5, HMAC-SHA256, and SHA-512
only via the library API and not via crypto_shash, allocating
crypto_shash objects for these algorithms is no longer necessary.
Remove all these allocations, their corresponding kconfig selections,
and their corresponding module soft dependencies.
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
For the HMAC-MD5 computations in NTLMv2, use the HMAC-MD5 library
instead of a "hmac(md5)" crypto_shash. This is simpler and faster.
With the library there's no need to allocate memory, no need to handle
errors, and the HMAC-MD5 code is accessed directly without inefficient
indirect calls and other unnecessary API overhead.
To preserve the existing behavior of NTLMv2 support being disabled when
the kernel is booted with "fips=1", make setup_ntlmv2_rsp() check
fips_enabled itself. Previously it relied on the error from
cifs_alloc_hash("hmac(md5)", &hmacmd5).
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Convert cifs_calc_signature() to use the MD5 library instead of a "md5"
crypto_shash. This is simpler and faster. With the library there's no
need to allocate memory, no need to handle errors, and the MD5 code is
accessed directly without inefficient indirect calls and other
unnecessary API overhead.
To preserve the existing behavior of MD5 signature support being
disabled when the kernel is booted with "fips=1", make
cifs_calc_signature() check fips_enabled itself. Previously it relied
on the error from cifs_alloc_hash("md5", &server->secmech.md5).
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Convert parse_mf_symlink() and format_mf_symlink() to use the MD5
library instead of a "md5" crypto_shash. This is simpler and faster.
With the library there's no need to allocate memory, no need to handle
errors, and the MD5 code is accessed directly without inefficient
indirect calls and other unnecessary API overhead.
This also fixes an issue where these functions did not work on kernels
booted in FIPS mode. The use of MD5 here is for data integrity rather
than a security purpose, so it can use a non-FIPS-approved algorithm.
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Convert smb2_calc_signature() to use the HMAC-SHA256 library instead of
a "hmac(sha256)" crypto_shash. This is simpler and faster. With the
library there's no need to allocate memory, no need to handle errors,
and the HMAC-SHA256 code is accessed directly without inefficient
indirect calls and other unnecessary API overhead.
To make this possible, make __cifs_calc_signature() support both the
HMAC-SHA256 library and crypto_shash. (crypto_shash is still needed for
HMAC-MD5 and AES-CMAC. A later commit will switch HMAC-MD5 from shash
to the library. I'd like to eventually do the same for AES-CMAC, but it
doesn't have a library API yet. So for now, shash is still needed.)
Also remove the unnecessary 'sigptr' variable.
For now smb3_crypto_shash_allocate() still allocates a "hmac(sha256)"
crypto_shash. It will be removed in a later commit.
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Convert generate_key() to use the HMAC-SHA256 library instead of a
"hmac(sha256)" crypto_shash. This is simpler and faster. With the
library there's no need to allocate memory, no need to handle errors,
and the HMAC-SHA256 code is accessed directly without inefficient
indirect calls and other unnecessary API overhead.
Also remove the unnecessary 'hashptr' variable.
For now smb3_crypto_shash_allocate() still allocates a "hmac(sha256)"
crypto_shash. It will be removed in a later commit.
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Convert smb311_update_preauth_hash() to use the SHA-512 library instead
of a "sha512" crypto_shash. This is simpler and faster. With the
library there's no need to allocate memory, no need to handle errors,
and the SHA-512 code is accessed directly without inefficient indirect
calls and other unnecessary API overhead.
Remove the call to smb311_crypto_shash_allocate() from
smb311_update_preauth_hash(), since it appears to have been needed only
to allocate the "sha512" crypto_shash. (It also had the side effect of
allocating the "cmac(aes)" crypto_shash, but that's also done in
generate_key() which is where the AES-CMAC key is initialized.)
For now the "sha512" crypto_shash is still being allocated elsewhere.
It will be removed in a later commit.
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Malicious SMB server can send invalid reply to FSCTL_DFS_GET_REFERRALS
- reply smaller than sizeof(struct get_dfs_referral_rsp)
- reply with number of referrals smaller than NumberOfReferrals in the
header
Processing of such replies will cause oob.
Return -EINVAL error on such replies to prevent oob-s.
Signed-off-by: Eugene Korenevsky <ekorenevsky@aliyun.com>
Cc: stable@vger.kernel.org
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Fix three refcount inconsistency issues related to `cifs_sb_tlink`.
Comments for `cifs_sb_tlink` state that `cifs_put_tlink()` needs to be
called after successful calls to `cifs_sb_tlink()`. Three calls fail to
update refcount accordingly, leading to possible resource leaks.
Fixes: 8ceb98437946 ("CIFS: Move rename to ops struct")
Fixes: 2f1afe25997f ("cifs: Use smb 2 - 3 and cifsacl mount options getacl functions")
Fixes: 366ed846df60 ("cifs: Use smb 2 - 3 and cifsacl mount options setacl function")
Cc: stable@vger.kernel.org
Signed-off-by: Shuhao Fu <sfual@cse.ust.hk>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Handle inode number mismatches in nsfs file handles
- Update the comment to init_file()
- Add documentation link for EBADF in the rust file code
- Skip read lock assertion for read-only filesystems when using dax
- Don't leak disconnected dentries during umount
- Fix new coredump input pattern validation
- Handle ENOIOCTLCMD conversion in vfs_fileattr_{g,s}et() correctly
- Remove redundant IOCB_DIO_CALLER_COMP clearing in overlayfs
* tag 'vfs-6.18-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
ovl: remove redundant IOCB_DIO_CALLER_COMP clearing
fs: return EOPNOTSUPP from file_setattr/file_getattr syscalls
Revert "fs: make vfs_fileattr_[get|set] return -EOPNOTSUPP"
coredump: fix core_pattern input validation
vfs: Don't leak disconnected dentries on umount
dax: skip read lock assertion for read-only filesystems
rust: file: add intra-doc link for 'EBADF'
fs: update comment in init_file()
nsfs: handle inode number mismatches gracefully in file handles
|
|
The extent map cache can become stale when extents are moved or
defragmented, causing subsequent operations to see outdated extent flags.
This triggers a BUG_ON in ocfs2_refcount_cal_cow_clusters().
The problem occurs when:
1. copy_file_range() creates a reflinked extent with OCFS2_EXT_REFCOUNTED
2. ioctl(FITRIM) triggers ocfs2_move_extents()
3. __ocfs2_move_extents_range() reads and caches the extent (flags=0x2)
4. ocfs2_move_extent()/ocfs2_defrag_extent() calls __ocfs2_move_extent()
which clears OCFS2_EXT_REFCOUNTED flag on disk (flags=0x0)
5. The extent map cache is not invalidated after the move
6. Later write() operations read stale cached flags (0x2) but disk has
updated flags (0x0), causing a mismatch
7. BUG_ON(!(rec->e_flags & OCFS2_EXT_REFCOUNTED)) triggers
Fix by clearing the extent map cache after each extent move/defrag
operation in __ocfs2_move_extents_range(). This ensures subsequent
operations read fresh extent data from disk.
Link: https://lore.kernel.org/all/20251009142917.517229-1-kartikey406@gmail.com/T/
Link: https://lkml.kernel.org/r/20251009154903.522339-1-kartikey406@gmail.com
Fixes: 53069d4e7695 ("Ocfs2/move_extents: move/defrag extents within a certain range.")
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Reported-by: syzbot+6fdd8fa3380730a4b22c@syzkaller.appspotmail.com
Tested-by: syzbot+6fdd8fa3380730a4b22c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?id=2959889e1f6e216585ce522f7e8bc002b46ad9e7
Reviewed-by: Mark Fasheh <mark@fasheh.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We should wait for the rdma_cm to become SMBDIRECT_SOCKET_DISCONNECTED,
it turns out that (at least running some xfstests e.g. cifs/001)
often triggers the case where wait_event_interruptible() returns
with -ERESTARTSYS instead of waiting for SMBDIRECT_SOCKET_DISCONNECTED
to be reached.
Or we are already in SMBDIRECT_SOCKET_DISCONNECTING and never wait
for SMBDIRECT_SOCKET_DISCONNECTED.
Fixes: 050b8c374019 ("smbd: Make upper layer decide when to destroy the transport")
Fixes: e8b3bfe9bc65 ("cifs: smbd: Don't destroy transport on RDMA disconnect")
Fixes: b0aa92a229ab ("smb: client: make sure smbd_disconnect_rdma_work() doesn't run after smbd_destroy() took over")
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 bug fixes from Ted Ts'o:
- Fix regression caused by removing CONFIG_EXT3_FS when testing some
very old defconfigs
- Avoid a BUG_ON when opening a file on a maliciously corrupted file
system
- Avoid mm warnings when freeing a very large orphan file metadata
- Avoid a theoretical races between metadata writeback and checkpoints
(it's very hard to hit in practice, since the race requires that the
writeback take a very long time)
* tag 'ext4_for_linus-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
Use CONFIG_EXT4_FS instead of CONFIG_EXT3_FS in all of the defconfigs
ext4: free orphan info with kvfree
ext4: detect invalid INLINE_DATA + EXTENTS flag combination
ext4, doc: fix and improve directory hash tree description
ext4: wait for ongoing I/O to complete before freeing blocks
jbd2: ensure that all ongoing I/O complete before freeing blocks
|
|
In order to maintain the code more easily, move duplicate definitions to
new common header file.
Co-developed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: ZhangGuoDong <zhangguodong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
If a smbdirect_mr_io structure if still visible to callers of
smbd_register_mr() we can't free the related memory when the
connection is disconnected! Otherwise smbd_deregister_mr()
will crash.
Now we use a mutex and refcounting in order to keep the
memory around if the connection is disconnected.
It means smbd_deregister_mr() can be called at any later time to free
the memory, which is no longer referenced by nor referencing the
connection.
It also means smbd_destroy() no longer needs to wait for
mr_io.used.count to become 0.
Fixes: 050b8c374019 ("smbd: Make upper layer decide when to destroy the transport")
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Since commit 305853cce3794 ("ksmbd: Fix race condition in RPC handle list
access"), ksmbd_session_rpc_method() attempts to lock sess->rpc_lock.
This causes hung connections / tasks when a client attempts to open
a named pipe. Using Samba's rpcclient tool:
$ rpcclient //192.168.1.254 -U user%password
$ rpcclient $> srvinfo
<connection hung here>
Kernel side:
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/0:0 state:D stack:0 pid:5021 tgid:5021 ppid:2 flags:0x00200000
Workqueue: ksmbd-io handle_ksmbd_work
Call trace:
__schedule from schedule+0x3c/0x58
schedule from schedule_preempt_disabled+0xc/0x10
schedule_preempt_disabled from rwsem_down_read_slowpath+0x1b0/0x1d8
rwsem_down_read_slowpath from down_read+0x28/0x30
down_read from ksmbd_session_rpc_method+0x18/0x3c
ksmbd_session_rpc_method from ksmbd_rpc_open+0x34/0x68
ksmbd_rpc_open from ksmbd_session_rpc_open+0x194/0x228
ksmbd_session_rpc_open from create_smb2_pipe+0x8c/0x2c8
create_smb2_pipe from smb2_open+0x10c/0x27ac
smb2_open from handle_ksmbd_work+0x238/0x3dc
handle_ksmbd_work from process_scheduled_works+0x160/0x25c
process_scheduled_works from worker_thread+0x16c/0x1e8
worker_thread from kthread+0xa8/0xb8
kthread from ret_from_fork+0x14/0x38
Exception stack(0x8529ffb0 to 0x8529fff8)
The task deadlocks because the lock is already held:
ksmbd_session_rpc_open
down_write(&sess->rpc_lock)
ksmbd_rpc_open
ksmbd_session_rpc_method
down_read(&sess->rpc_lock) <-- deadlock
Adjust ksmbd_session_rpc_method() callers to take the lock when necessary.
Fixes: 305853cce3794 ("ksmbd: Fix race condition in RPC handle list access")
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Reference count of ksmbd_session will leak when session need reconnect.
Fix this by adding the missing ksmbd_user_session_put().
Co-developed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: ZhangGuoDong <zhangguodong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Memory leak occurs when ksmbd_vfs_read() fails.
Fix this by adding the missing kvfree().
Co-developed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: ZhangGuoDong <zhangguodong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Since the len argument value passed to exfat_ioctl_set_volume_label()
from exfat_nls_to_utf16() is passed 1 too large, an out-of-bounds read
occurs when dereferencing p_cstring in exfat_nls_to_ucs2() later.
And because of the NLS_NAME_OVERLEN macro, another error occurs when
creating a file with a period at the end using utf8 and other iocharsets.
So to avoid this, you should remove the code that uses NLS_NAME_OVERLEN
macro and make the len argument value be the length of the label string,
but with a maximum length of FSLABEL_MAX - 1.
Reported-by: syzbot+98cc76a76de46b3714d4@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=98cc76a76de46b3714d4
Fixes: d01579d590f7 ("exfat: Add support for FS_IOC_{GET,SET}FSLABEL")
Suggested-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
We found an infinite loop bug in the exFAT file system that can lead to a
Denial-of-Service (DoS) condition. When a dentry in an exFAT filesystem is
malformed, the following system calls — SYS_openat, SYS_ftruncate, and
SYS_pwrite64 — can cause the kernel to hang.
Root cause analysis shows that the size validation code in exfat_find()
does not check whether dentry.stream.valid_size is negative. As a result,
the system calls mentioned above can succeed and eventually trigger the DoS
issue.
This patch adds a check for negative dentry.stream.valid_size to prevent
this vulnerability.
Co-developed-by: Seunghun Han <kkamagui@gmail.com>
Signed-off-by: Seunghun Han <kkamagui@gmail.com>
Co-developed-by: Jihoon Kwon <jimmyxyz010315@gmail.com>
Signed-off-by: Jihoon Kwon <jimmyxyz010315@gmail.com>
Signed-off-by: Jaehun Gou <p22gone@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Fix a crasher reported by rtm@csail.mit.edu
* tag 'nfsd-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: Define a proc_layoutcommit for the FlexFiles layout type
|
|
Assuming the disk layout as below,
disk0: 0 --- 0x00035abfff
disk1: 0x00035ac000 --- 0x00037abfff
disk2: 0x00037ac000 --- 0x00037ebfff
and we want to read data from offset=13568 having len=128 across the block
devices, we can illustrate the block addresses like below.
0 .. 0x00037ac000 ------------------- 0x00037ebfff, 0x00037ec000 -------
| ^ ^ ^
| fofs 0 13568 13568+128
| ------------------------------------------------------
| LBA 0x37e8aa9 0x37ebfa9 0x37ec029
--- map 0x3caa9 0x3ffa9
In this example, we should give the relative map of the target block device
ranging from 0x3caa9 to 0x3ffa9 where the length should be calculated by
0x37ebfff + 1 - 0x37ebfa9.
In the below equation, however, map->m_pblk was supposed to be the original
address instead of the one from the target block address.
- map->m_len = min(map->m_len, dev->end_blk + 1 - map->m_pblk);
Cc: stable@vger.kernel.org
Fixes: 71f2c8206202 ("f2fs: multidevice: support direct IO")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
iput() calls the problematic routine, which does a ->i_count inc/dec
cycle. Undoing it with iput() recurses into the problem.
Note f2fs should not be playing games with the refcount to begin with,
but that will be handled later. Right now solve the immediate
regression.
Fixes: bc986b1d756482a ("fs: stop accessing ->i_count directly in f2fs and gfs2")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202509301450.138b448f-lkp@intel.com
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The warning -Wflex-array-member-not-at-end was introduced in GCC-14, and
we are getting ready to enable it, globally.
Fix the following warning:
fs/btrfs/send.c:181:24: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
and move the declaration of send_ctx::cur_inode_path to the end.
Notice that struct fs_path contains a flexible array member inline_buf,
but also a padding array and a limit calculated for the usable space of
inline_buf (FS_PATH_INLINE_SIZE). It is not the pattern where flexible
array is in the middle of a structure and could potentially overwrite
other members.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The parentheses for the unlikely() annotation were put in the wrong
place so it means that the condition is basically never true and the
bounds checking is skipped.
Fixes: aab9458b9f00 ("btrfs: tree-checker: add inode extref checks")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At the end of btrfs_load_block_group_zone_info() the first thing we do
is to ensure that if the mapping type is not a SINGLE one and there is
no RAID stripe tree, then we return early with an error.
Doing that, though, prevents the code from running the last calls from
this function which are about freeing memory allocated during its
run. Hence, in this case, instead of returning early, we set the ret
value and fall through the rest of the cleanup code.
Fixes: 5906333cc4af ("btrfs: zoned: don't skip block group profile checks on conventional zones")
CC: stable@vger.kernel.org # 6.8+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Miquel Sabaté Solà <mssola@mssola.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The intent of btrfs_readahead_expand() was to expand to the length of
the current compressed extent being read. However, "ram_bytes" is *not*
that, in the case where a single physical compressed extent is used for
multiple file extents.
Consider this case with a large compressed extent C and then later two
non-compressed extents N1 and N2 written over C, leaving C1 and C2
pointing to offset/len pairs of C:
[ C ]
[ N1 ][ C1 ][ N2 ][ C2 ]
In such a case, ram_bytes for both C1 and C2 is the full uncompressed
length of C. So starting readahead in C1 will expand the readahead past
the end of C1, past N2, and into C2. This will then expand readahead
again, to C2_start + ram_bytes, way past EOF. First of all, this is
totally undesirable, we don't want to read the whole file in arbitrary
chunks of the large underlying extent if it happens to exist. Secondly,
it results in zeroing the range past the end of C2 up to ram_bytes. This
is particularly unpleasant with fs-verity as it can zero and set
uptodate pages in the verity virtual space past EOF. This incorrect
readahead behavior can lead to verity verification errors, if we iterate
in a way that happens to do the wrong readahead.
Fix this by using em->len for readahead expansion, not em->ram_bytes,
resulting in the expected behavior of stopping readahead at the extent
boundary.
Reported-by: Max Chernoff <git@maxchernoff.ca>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2399898
Fixes: 9e9ff875e417 ("btrfs: use readahead_expand() on compressed extents")
CC: stable@vger.kernel.org # 6.17
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently, when building a free space tree at populate_free_space_tree(),
if we are not using the block group tree feature, we always expect to find
block group items (either extent items or a block group item with key type
BTRFS_BLOCK_GROUP_ITEM_KEY) when we search the extent tree with
btrfs_search_slot_for_read(), so we assert that we found an item. However
this expectation is wrong since we can have a new block group created in
the current transaction which is still empty and for which we still have
not added the block group's item to the extent tree, in which case we do
not have any items in the extent tree associated to the block group.
The insertion of a new block group's block group item in the extent tree
happens at btrfs_create_pending_block_groups() when it calls the helper
insert_block_group_item(). This typically is done when a transaction
handle is released, committed or when running delayed refs (either as
part of a transaction commit or when serving tickets for space reservation
if we are low on free space).
So remove the assertion at populate_free_space_tree() even when the block
group tree feature is not enabled and update the comment to mention this
case.
Syzbot reported this with the following stack trace:
BTRFS info (device loop3 state M): rebuilding free space tree
assertion failed: ret == 0 :: 0, in fs/btrfs/free-space-tree.c:1115
------------[ cut here ]------------
kernel BUG at fs/btrfs/free-space-tree.c:1115!
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 1 UID: 0 PID: 6352 Comm: syz.3.25 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025
RIP: 0010:populate_free_space_tree+0x700/0x710 fs/btrfs/free-space-tree.c:1115
Code: ff ff e8 d3 (...)
RSP: 0018:ffffc9000430f780 EFLAGS: 00010246
RAX: 0000000000000043 RBX: ffff88805b709630 RCX: fea61d0e2e79d000
RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000
RBP: ffffc9000430f8b0 R08: ffffc9000430f4a7 R09: 1ffff92000861e94
R10: dffffc0000000000 R11: fffff52000861e95 R12: 0000000000000001
R13: 1ffff92000861f00 R14: dffffc0000000000 R15: 0000000000000000
FS: 00007f424d9fe6c0(0000) GS:ffff888125afc000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fd78ad212c0 CR3: 0000000076d68000 CR4: 00000000003526f0
Call Trace:
<TASK>
btrfs_rebuild_free_space_tree+0x1ba/0x6d0 fs/btrfs/free-space-tree.c:1364
btrfs_start_pre_rw_mount+0x128f/0x1bf0 fs/btrfs/disk-io.c:3062
btrfs_remount_rw fs/btrfs/super.c:1334 [inline]
btrfs_reconfigure+0xaed/0x2160 fs/btrfs/super.c:1559
reconfigure_super+0x227/0x890 fs/super.c:1076
do_remount fs/namespace.c:3279 [inline]
path_mount+0xd1a/0xfe0 fs/namespace.c:4027
do_mount fs/namespace.c:4048 [inline]
__do_sys_mount fs/namespace.c:4236 [inline]
__se_sys_mount+0x313/0x410 fs/namespace.c:4213
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0xfa0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f424e39066a
Code: d8 64 89 02 (...)
RSP: 002b:00007f424d9fde68 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 00007f424d9fdef0 RCX: 00007f424e39066a
RDX: 0000200000000180 RSI: 0000200000000380 RDI: 0000000000000000
RBP: 0000200000000180 R08: 00007f424d9fdef0 R09: 0000000000000020
R10: 0000000000000020 R11: 0000000000000246 R12: 0000200000000380
R13: 00007f424d9fdeb0 R14: 0000000000000000 R15: 00002000000002c0
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
Reported-by: syzbot+884dc4621377ba579a6f@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/68dc3dab.a00a0220.102ee.004e.GAE@google.com/
Fixes: a5ed91828518 ("Btrfs: implement the free space B-tree")
CC: <stable@vger.kernel.org> # 6.1.x: 1961d20f6fa8: btrfs: fix assertion when building free space tree
CC: <stable@vger.kernel.org> # 6.1.x
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
Syzbot reported an ASSERT() triggered inside scrub:
BTRFS info (device loop0): scrub: started on devid 1
assertion failed: !folio_test_partial_kmap(folio) :: 0, in fs/btrfs/scrub.c:697
------------[ cut here ]------------
kernel BUG at fs/btrfs/scrub.c:697!
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 0 UID: 0 PID: 6077 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025
RIP: 0010:scrub_stripe_get_kaddr+0x1bb/0x1c0 fs/btrfs/scrub.c:697
Call Trace:
<TASK>
scrub_bio_add_sector fs/btrfs/scrub.c:932 [inline]
scrub_submit_initial_read+0xf21/0x1120 fs/btrfs/scrub.c:1897
submit_initial_group_read+0x423/0x5b0 fs/btrfs/scrub.c:1952
flush_scrub_stripes+0x18f/0x1150 fs/btrfs/scrub.c:1973
scrub_stripe+0xbea/0x2a30 fs/btrfs/scrub.c:2516
scrub_chunk+0x2a3/0x430 fs/btrfs/scrub.c:2575
scrub_enumerate_chunks+0xa70/0x1350 fs/btrfs/scrub.c:2839
btrfs_scrub_dev+0x6e7/0x10e0 fs/btrfs/scrub.c:3153
btrfs_ioctl_scrub+0x249/0x4b0 fs/btrfs/ioctl.c:3163
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0xfa0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
---[ end trace 0000000000000000 ]---
Which doesn't make much sense, as all the folios we allocated for scrub
should not be highmem.
[CAUSE]
Thankfully syzbot has a detailed kernel config file, showing that
CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP is set to y.
And that debug option will force all folio_test_partial_kmap() to return
true, to improve coverage on highmem tests.
But in our case we really just want to make sure the folios we allocated
are not highmem (and they are indeed not). Such incorrect result from
folio_test_partial_kmap() is just screwing up everything.
[FIX]
Replace folio_test_partial_kmap() to folio_test_highmem() so that we
won't bother those highmem specific debuging options.
Fixes: 5fbaae4b8567 ("btrfs: prepare scrub to support bs > ps cases")
Reported-by: syzbot+bde59221318c592e6346@syzkaller.appspotmail.com
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
With v6.17-rc kernels, btrfs will always set 'ssd' mount option even if
the block device is not a rotating one:
# cat /sys/block/sdd/queue/rotational
1
# cat /etc/fstab:
LABEL=DATA2 /data2 btrfs rw,relatime,space_cache=v2,subvolid=5,subvol=/,nofail,nosuid,nodev 0 0
# mount
[...]
/dev/sdd on /data2 type btrfs (rw,nosuid,nodev,relatime,ssd,space_cache=v2,subvolid=5,subvol=/)
[CAUSE]
The 'ssd' mount option is set by set_device_specific_options(), and it
expects that if there is any rotating device in the btrfs, it will set
fs_devices::rotating.
However after commit bddf57a70781 ("btrfs: delay btrfs_open_devices()
until super block is created"), the device opening is delayed until the
super block is created.
But the timing of set_device_specific_options() is still left as is,
this makes the function be called without any device opened.
Since no device is opened, thus fs_devices::rotating will never be set,
making btrfs incorrectly set 'ssd' mount option.
[FIX]
Only call set_device_specific_options() after btrfs_open_devices().
Also only call set_device_specific_options() after a new mount, if we're
mounting a mounted btrfs, there is no need to set the device specific
mount options again.
Reported-by: HAN Yuwei <hrx@bupt.moe>
Link: https://lore.kernel.org/linux-btrfs/C8FF75669DFFC3C5+5f93bf8a-80a0-48a6-81bf-4ec890abc99a@bupt.moe/
Fixes: bddf57a70781 ("btrfs: delay btrfs_open_devices() until super block is created")
CC: stable@vger.kernel.org # 6.17
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
On 'btrfs_ioctl_qgroup_assign' we first duplicate the argument as
provided by the user, which is kfree'd in the end. But this was not the
case when allocating memory for 'prealloc'. In this case, if it somehow
failed, then the previous code would go directly into calling
'mnt_drop_write_file', without freeing the string duplicated from the
user space.
Fixes: 4addc1ffd67a ("btrfs: qgroup: preallocate memory before adding a relation")
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Miquel Sabaté Solà <mssola@mssola.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When starting relocation, at reloc_chunk_start(), if we happen to find
the flag BTRFS_FS_RELOC_RUNNING is already set we return an error
(-EINPROGRESS) to the callers, however the callers call reloc_chunk_end()
which will clear the flag BTRFS_FS_RELOC_RUNNING, which is wrong since
relocation was started by another task and still running.
Finding the BTRFS_FS_RELOC_RUNNING flag already set is an unexpected
scenario, but still our current behaviour is not correct.
Fix this by never calling reloc_chunk_end() if reloc_chunk_start() has
returned an error, which is what logically makes sense, since the general
widespread pattern is to have end functions called only if the counterpart
start functions succeeded. This requires changing reloc_chunk_start() to
clear BTRFS_FS_RELOC_RUNNING if there's a pending cancel request.
Fixes: 907d2710d727 ("btrfs: add cancellable chunk relocation support")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since the last renewal time was initialized to 0 and jiffies start
counting at -5 minutes, any clients connected in the first 5 minutes
after a reboot would have their renewal timer set to a very long
interval. If the connection was idle, this would result in the client
state timing out on the server and the next call to the server would
return NFS4ERR_BADSESSION.
Fix this by initializing the last renewal time to the current jiffies
instead of 0.
Signed-off-by: Joshua Watt <jpewhacker@gmail.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
I noticed xfstests generic/193 and generic/355 started failing against
knfsd after commit e7a8ebc305f2 ("NFSD: Offer write delegation for OPEN
with OPEN4_SHARE_ACCESS_WRITE").
I ran those same tests against ONTAP (which has had write delegation
support for a lot longer than knfsd) and they fail there too... so
while it's a new failure against knfsd, it isn't an entirely new
failure.
Add the NFS_INO_REVAL_FORCED flag so that the presence of a delegation
doesn't keep the inode from being revalidated to fetch the updated mode.
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
The setting of delay_retrans is applied to synchronous RPC operations
because the retransmit count is stored in same struct nfs4_exception
that is passed each time an error is checked. However, for asynchronous
operations (READ, WRITE, LOCKU, CLOSE, DELEGRETURN), a new struct
nfs4_exception is made on the stack each time the task callback is
invoked. This means that the retransmit count is always zero and thus
delay_retrans never takes effect.
Apply delay_retrans to these operations by tracking and updating their
retransmit count.
Change-Id: Ieb33e046c2b277cb979caa3faca7f52faf0568c9
Signed-off-by: Joshua Watt <jpewhacker@gmail.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Move mirror_array's dss_count initialization and dss allocation to
ff_layout_alloc_mirror(), just before the loop that initializes each
nfs4_ff_layout_ds_stripe's nfs_file_localio.
Also handle NULL return from kcalloc() and remove one level of indent
in ff_layout_alloc_mirror().
This commit fixes dangling nfsd_serv refcount issues seen when using
NFS LOCALIO and then attempting to stop the NFSD service.
Fixes: 20b1d75fb840 ("NFSv4/flexfiles: Add support for striped layouts")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
This is more consistent as we call ib_dma_unmap_sg() only
when the memory is no longer registered.
This is the same pattern as calling ib_dma_unmap_sg() after
IB_WR_LOCAL_INV.
Fixes: c7398583340a ("CIFS: SMBD: Implement RDMA memory registration")
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This seems to be the more reliable way to check if we need to
call ib_dma_unmap_sg().
Fixes: c7398583340a ("CIFS: SMBD: Implement RDMA memory registration")
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
- use 'mr' as variable name
- style fixes
This will make further changes easier.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
- use 'mr' as variable name
- style fixes
This will make further changes easier.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
- use 'mr' as variable name
- use goto lables for easier cleanup
- use destroy_mr_list()
- style fixes
- INIT_WORK(&sc->mr_io.recovery_work, smbd_mr_recovery_work) on success
This will make further changes easier.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This should make sure get_mr() can't see the removed entries.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This makes the code clearer and will make further changes easier.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
No callers checks the return value and this makes further
changes easier.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This will be used in the next commits in order to improve the
client code.
A broken connection can just disable the smbdirect_mr_io while
keeping the memory arround for the caller.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The local variable “rc” is assigned a value in an if branch without
using it before it is reassigned there.
Thus delete this assignment statement.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Return a status code without storing it in an intermediate variable.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Add two jump targets so that a bit of exception handling can be better
reused at the end of this function implementation.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull hpfs updates from Mikulas Patocka:
- Avoid -Wflex-array-member-not-at-end warnings
- Replace simple_strtoul with kstrtoint
- Fix error code for new_inode() failure
* tag 'for-6.18/hpfs-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
fs/hpfs: Fix error code for new_inode() failure in mkdir/create/mknod/symlink
hpfs: Replace simple_strtoul with kstrtoint in hpfs_parse_param
fs: hpfs: Avoid multiple -Wflex-array-member-not-at-end warnings
|
|
Orphan info is now getting allocated with kvmalloc_array(). Free it with
kvfree() instead of kfree() to avoid complaints from mm.
Reported-by: Chris Mason <clm@meta.com>
Fixes: 0a6ce20c1564 ("ext4: verify orphan file size is not too big")
Cc: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Message-ID: <20251007134936.7291-2-jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
