summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2025-12-18ALSA: hda/tas2781: fix speaker id retrieval for multiple probesAntheas Kapenekakis
commit 945865a0ddf3e3950aea32e23e10d815ee9b21bc upstream. Currently, on ASUS projects, the TAS2781 codec attaches the speaker GPIO to the first tasdevice_priv instance using devm. This causes tas2781_read_acpi to fail on subsequent probes since the GPIO is already managed by the first device. This causes a failure on Xbox Ally X, because it has two amplifiers, and prevents us from quirking both the Xbox Ally and Xbox Ally X in the realtek codec driver. It is unnecessary to attach the GPIO to a device as it is static. Therefore, instead of attaching it and then reading it when loading the firmware, read its value directly in tas2781_read_acpi and store it in the private data structure. Then, make reading the value non-fatal so that ASUS projects that miss a speaker pin can still work, perhaps using fallback firmware. Fixes: 4e7035a75da9 ("ALSA: hda/tas2781: Add speaker id check for ASUS projects") Cc: stable@vger.kernel.org # 6.17 Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev> Reviewed-by: Baojun Xu <baojun.xu@ti.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20251026191635.2447593-1-lkml@antheas.dev Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-18efi/cper: align ARM CPER type with UEFI 2.9A/2.10 specsMauro Carvalho Chehab
[ Upstream commit 96b010536ee020e716d28d9b359a4bcd18800aeb ] Up to UEFI spec 2.9, the type byte of CPER struct for ARM processor was defined simply as: Type at byte offset 4: - Cache error - TLB Error - Bus Error - Micro-architectural Error All other values are reserved Yet, there was no information about how this would be encoded. Spec 2.9A errata corrected it by defining: - Bit 1 - Cache Error - Bit 2 - TLB Error - Bit 3 - Bus Error - Bit 4 - Micro-architectural Error All other values are reserved That actually aligns with the values already defined on older versions at N.2.4.1. Generic Processor Error Section. Spec 2.10 also preserve the same encoding as 2.9A. Adjust CPER and GHES handling code for both generic and ARM processors to properly handle UEFI 2.9A and 2.10 encoding. Link: https://uefi.org/specs/UEFI/2.10/Apx_N_Common_Platform_Error_Record.html#arm-processor-error-information Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Borislav Petkov (AMD) <bp@alien8.de> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18efi/cper: Add a new helper function to print bitmasksMauro Carvalho Chehab
[ Upstream commit a976d790f49499ccaa0f991788ad8ebf92e7fd5c ] Add a helper function to print a string with names associated to each bit field. A typical example is: const char * const bits[] = { "bit 3 name", "bit 4 name", "bit 5 name", }; char str[120]; unsigned int bitmask = BIT(3) | BIT(5); #define MASK GENMASK(5,3) cper_bits_to_str(str, sizeof(str), FIELD_GET(MASK, bitmask), bits, ARRAY_SIZE(bits)); The above code fills string "str" with "bit 3 name|bit 5 name". Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Acked-by: Borislav Petkov (AMD) <bp@alien8.de> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18ALSA: uapi: Fix typo in asound.h commentAndres J Rosa
[ Upstream commit 9a97857db0c5655b8932f86b5d18bb959079b0ee ] Fix 'level-shit' to 'level-shift' in struct snd_cea_861_aud_if comment. Fixes: 7ba1c40b536e ("ALSA: Add definitions for CEA-861 Audio InfoFrames") Signed-off-by: Andres J Rosa <andyrosa@gmail.com> Link: https://patch.msgid.link/20251203162509.1822-1-andyrosa@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18block: fix comment for op_is_zone_mgmt() to include RESET_ALLshechenglong
[ Upstream commit 8a32282175c964eb15638e8dfe199fc13c060f67 ] REQ_OP_ZONE_RESET_ALL is a zone management request, and op_is_zone_mgmt() has returned true for it. Update the comment to remove the misleading exception note so the documentation matches the implementation. Fixes: 12a1c9353c47 ("block: fix op_is_zone_mgmt() to handle REQ_OP_ZONE_RESET_ALL") Signed-off-by: shechenglong <shechenglong@xfusion.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18f2fs: revert summary entry count from 2048 to 512 in 16kb block supportDaeho Jeong
[ Upstream commit 7ee8bc3942f20964ad730871b885688ea3a2961a ] The recent increase in the number of Segment Summary Area (SSA) entries from 512 to 2048 was an unintentional change in logic of 16kb block support. This commit corrects the issue. To better utilize the space available from the erroneous 2048-entry calculation, we are implementing a solution to share the currently unused SSA space with neighboring segments. This enhances overall SSA utilization without impacting the established 8MB segment size. Fixes: d7e9a9037de2 ("f2fs: Support Block Size == Page Size") Signed-off-by: Daeho Jeong <daehojeong@google.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18NFS: Fix inheritance of the block sizes when automountingTrond Myklebust
[ Upstream commit 2b092175f5e301cdaa935093edfef2be9defb6df ] Only inherit the block sizes that were actually specified as mount parameters for the parent mount. Fixes: 62a55d088cd8 ("NFS: Additional refactoring for fs_context conversion") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18net: hsr: create an API to get hsr port typeXiaoliang Yang
[ Upstream commit a0244e76213980f3b9bb5d40b0b6705fcf24230d ] Since the introduction of HSR_PT_INTERLINK in commit 5055cccfc2d1 ("net: hsr: Provide RedBox support (HSR-SAN)"), we see that different port types require different settings for hardware offload, which was not the case before when we only had HSR_PT_SLAVE_A and HSR_PT_SLAVE_B. But there is currently no way to know which port is which type, so create the hsr_get_port_type() API function and export it. When hsr_get_port_type() is called from the device driver, the port can must be found in the HSR port list. An important use case is for this function to work from offloading drivers' NETDEV_CHANGEUPPER handler, which is triggered by hsr_portdev_setup() -> netdev_master_upper_dev_link(). Therefore, we need to move the addition of the hsr_port to the HSR port list prior to calling hsr_portdev_setup(). This makes the error restoration path also more similar to hsr_del_port(), where kfree_rcu(port) is already used. Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Lukasz Majewski <lukma@denx.de> Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Łukasz Majewski <lukma@nabladev.com> Link: https://patch.msgid.link/20251130131657.65080-3-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 30296ac76426 ("net: dsa: xrs700x: reject unsupported HSR configurations") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18rqspinlock: Enclose lock/unlock within lock entry acquisitionsKumar Kartikeya Dwivedi
[ Upstream commit beb7021a6003d9c6a463fffca0d6311efb8e0e66 ] Ritesh reported that timeouts occurred frequently for rqspinlock despite reentrancy on the same lock on the same CPU in [0]. This patch closes one of the races leading to this behavior, and reduces the frequency of timeouts. We currently have a tiny window between the fast-path cmpxchg and the grabbing of the lock entry where an NMI could land, attempt the same lock that was just acquired, and end up timing out. This is not ideal. Instead, move the lock entry acquisition from the fast path to before the cmpxchg, and remove the grabbing of the lock entry in the slow path, assuming it was already taken by the fast path. The TAS fallback is invoked directly without being preceded by the typical fast path, therefore we must continue to grab the deadlock detection entry in that case. Case on lock leading to missed AA: cmpxchg lock A <NMI> ... rqspinlock acquisition of A ... timeout </NMI> grab_held_lock_entry(A) There is a similar case when unlocking the lock. If the NMI lands between the WRITE_ONCE and smp_store_release, it is possible that we end up in a situation where the NMI fails to diagnose the AA condition, leading to a timeout. Case on unlock leading to missed AA: WRITE_ONCE(rqh->locks[rqh->cnt - 1], NULL) <NMI> ... rqspinlock acquisition of A ... timeout </NMI> smp_store_release(A->locked, 0) The patch changes the order on unlock to smp_store_release() succeeded by WRITE_ONCE() of NULL. This avoids the missed AA detection described above, but may lead to a false positive if the NMI lands between these two statements, which is acceptable (and preferred over a timeout). The original intention of the reverse order on unlock was to prevent the following possible misdiagnosis of an ABBA scenario: grab entry A lock A grab entry B lock B unlock B smp_store_release(B->locked, 0) grab entry B lock B grab entry A lock A ! <detect ABBA> WRITE_ONCE(rqh->locks[rqh->cnt - 1], NULL) If the store release were is after the WRITE_ONCE, the other CPU would not observe B in the table of the CPU unlocking the lock B. However, since the threads are obviously participating in an ABBA deadlock, it is no longer appealing to use the order above since it may lead to a 250 ms timeout due to missed AA detection. [0]: https://lore.kernel.org/bpf/CAH6OuBTjG+N=+GGwcpOUbeDN563oz4iVcU3rbse68egp9wj9_A@mail.gmail.com Fixes: 0d80e7f951be ("rqspinlock: Choose trylock fallback for NMI waiters") Reported-by: Ritesh Oedayrajsingh Varma <ritesh@superluminal.eu> Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20251128232802.1031906-2-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18vfio/pci: Use RCU for error/request triggers to avoid circular lockingAlex Williamson
[ Upstream commit 98693e0897f754e3f51ce6626ed5f785f625ba2b ] Thanks to a device generating an ACS violation during bus reset, lockdep reported the following circular locking issue: CPU0: SET_IRQS (MSI/X): holds igate, acquires memory_lock CPU1: HOT_RESET: holds memory_lock, acquires pci_bus_sem CPU2: AER: holds pci_bus_sem, acquires igate This results in a potential 3-way deadlock. Remove the pci_bus_sem->igate leg of the triangle by using RCU to peek at the eventfd rather than locking it with igate. Fixes: 3be3a074cf5b ("vfio-pci: Don't use device_lock around AER interrupt setup") Signed-off-by: Alex Williamson <alex.williamson@nvidia.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20251124223623.2770706-1-alex@shazbot.org Signed-off-by: Alex Williamson <alex@shazbot.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18netfilter: nf_conncount: rework API to use sk_buff directlyFernando Fernandez Mancera
[ Upstream commit be102eb6a0e7c03db00e50540622f4e43b2d2844 ] When using nf_conncount infrastructure for non-confirmed connections a duplicated track is possible due to an optimization introduced since commit d265929930e2 ("netfilter: nf_conncount: reduce unnecessary GC"). In order to fix this introduce a new conncount API that receives directly an sk_buff struct. It fetches the tuple and zone and the corresponding ct from it. It comes with both existing conncount variants nf_conncount_count_skb() and nf_conncount_add_skb(). In addition remove the old API and adjust all the users to use the new one. This way, for each sk_buff struct it is possible to check if there is a ct present and already confirmed. If so, skip the add operation. Fixes: d265929930e2 ("netfilter: nf_conncount: reduce unnecessary GC") Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18virtio: clean up features qword/dword termsMichael S. Tsirkin
[ Upstream commit 9513f25056b22100ddffe24898c587873b0d022c ] virtio pci uses word to mean "16 bits". mmio uses it to mean "32 bits". To avoid confusion, let's avoid the term in core virtio altogether. Just say U64 to mean "64 bit". Fixes: e7d4c1c5a546 ("virtio: introduce extended features") Cc: Paolo Abeni <pabeni@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-ID: <ad53b7b6be87fc524f45abaeca0bb05fb3633397.1764225384.git.mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18virtio: fix virtqueue_set_affinity() docsMichael S. Tsirkin
[ Upstream commit 43236d8bbafff94b423afecc4a692dd90602d426 ] Rewrite the comment for better grammar and clarity. Fixes: 75a0a52be3c2 ("virtio: introduce an API to set affinity for a virtqueue") Message-Id: <e317e91bd43b070e5eaec0ebbe60c5749d02e2dd.1763026134.git.mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18virtio: fix grammar in virtio_queue_info docsMichael S. Tsirkin
[ Upstream commit 63598fba55ab9d384818fed48dc04006cecf7be4 ] Fix grammar in the description of @ctx Fixes: c502eb85c34e ("virtio: introduce virtio_queue_info struct and find_vqs_info() config op") Message-Id: <a5cf2b92573200bdb1c1927e559d3930d61a4af2.1763026134.git.mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18virtio: fix whitespace in virtio_config_opsMichael S. Tsirkin
[ Upstream commit 7831791e77a1cd29528d4dc336ce14466aef5ba6 ] The finalize_features documentation uses a tab between words. Use space instead. Fixes: d16c0cd27331 ("docs: driver-api: virtio: virtio on Linux") Message-Id: <39d7685c82848dc6a876d175e33a1407f6ab3fc1.1763026134.git.mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18virtio: fix typo in virtio_device_ready() commentMichael S. Tsirkin
[ Upstream commit 361173f95ae4b726ebbbf0bd594274f5576c4abc ] "coherenct" -> "coherent" Fixes: 8b4ec69d7e09 ("virtio: harden vring IRQ") Message-Id: <db286e9a65449347f6584e68c9960fd5ded2b4b0.1763026134.git.mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18backlight: lp855x: Fix lp855x.h kernel-doc warningsRandy Dunlap
[ Upstream commit 2d45db63260c6ae3cf007361e04a1c41bd265084 ] Add a missing struct short description and a missing leading " *" to lp855x.h to avoid kernel-doc warnings: Warning: include/linux/platform_data/lp855x.h:126 missing initial short description on line: * struct lp855x_platform_data Warning: include/linux/platform_data/lp855x.h:131 bad line: Only valid when mode is PWM_BASED. Fixes: 7be865ab8634 ("backlight: new backlight driver for LP855x devices") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org> Link: https://patch.msgid.link/20251111060916.1995920-1-rdunlap@infradead.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18wifi: ieee80211: correct FILS status codesRia Thomas
[ Upstream commit 24d4da5c2565313c2ad3c43449937a9351a64407 ] The FILS status codes are set to 108/109, but the IEEE 802.11-2020 spec defines them as 112/113. Update the enum so it matches the specification and keeps the kernel consistent with standard values. Fixes: a3caf7440ded ("cfg80211: Add support for FILS shared key authentication offload") Signed-off-by: Ria Thomas <ria.thomas@morsemicro.com> Reviewed-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Link: https://patch.msgid.link/20251124125637.3936154-1-ria.thomas@morsemicro.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18wifi: mt76: wed: use proper wed reference in mt76 wed driver callabacksLorenzo Bianconi
[ Upstream commit 385aab8fccd7a8746b9f1a17f3c1e38498a14bc7 ] MT7996 driver can use both wed and wed_hif2 devices to offload traffic from/to the wireless NIC. In the current codebase we assume to always use the primary wed device in wed callbacks resulting in the following crash if the hw runs wed_hif2 (e.g. 6GHz link). [ 297.455876] Unable to handle kernel read from unreadable memory at virtual address 000000000000080a [ 297.464928] Mem abort info: [ 297.467722] ESR = 0x0000000096000005 [ 297.471461] EC = 0x25: DABT (current EL), IL = 32 bits [ 297.476766] SET = 0, FnV = 0 [ 297.479809] EA = 0, S1PTW = 0 [ 297.482940] FSC = 0x05: level 1 translation fault [ 297.487809] Data abort info: [ 297.490679] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 297.496156] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 297.501196] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 297.506500] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000107480000 [ 297.512927] [000000000000080a] pgd=08000001097fb003, p4d=08000001097fb003, pud=08000001097fb003, pmd=0000000000000000 [ 297.523532] Internal error: Oops: 0000000096000005 [#1] SMP [ 297.715393] CPU: 2 UID: 0 PID: 45 Comm: kworker/u16:2 Tainted: G O 6.12.50 #0 [ 297.723908] Tainted: [O]=OOT_MODULE [ 297.727384] Hardware name: Banana Pi BPI-R4 (2x SFP+) (DT) [ 297.732857] Workqueue: nf_ft_offload_del nf_flow_rule_route_ipv6 [nf_flow_table] [ 297.740254] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 297.747205] pc : mt76_wed_offload_disable+0x64/0xa0 [mt76] [ 297.752688] lr : mtk_wed_flow_remove+0x58/0x80 [ 297.757126] sp : ffffffc080fe3ae0 [ 297.760430] x29: ffffffc080fe3ae0 x28: ffffffc080fe3be0 x27: 00000000deadbef7 [ 297.767557] x26: ffffff80c5ebca00 x25: 0000000000000001 x24: ffffff80c85f4c00 [ 297.774683] x23: ffffff80c1875b78 x22: ffffffc080d42cd0 x21: ffffffc080660018 [ 297.781809] x20: ffffff80c6a076d0 x19: ffffff80c6a043c8 x18: 0000000000000000 [ 297.788935] x17: 0000000000000000 x16: 0000000000000001 x15: 0000000000000000 [ 297.796060] x14: 0000000000000019 x13: ffffff80c0ad8ec0 x12: 00000000fa83b2da [ 297.803185] x11: ffffff80c02700c0 x10: ffffff80c0ad8ec0 x9 : ffffff81fef96200 [ 297.810311] x8 : ffffff80c02700c0 x7 : ffffff80c02700d0 x6 : 0000000000000002 [ 297.817435] x5 : 0000000000000400 x4 : 0000000000000000 x3 : 0000000000000000 [ 297.824561] x2 : 0000000000000001 x1 : 0000000000000800 x0 : ffffff80c6a063c8 [ 297.831686] Call trace: [ 297.834123] mt76_wed_offload_disable+0x64/0xa0 [mt76] [ 297.839254] mtk_wed_flow_remove+0x58/0x80 [ 297.843342] mtk_flow_offload_cmd+0x434/0x574 [ 297.847689] mtk_wed_setup_tc_block_cb+0x30/0x40 [ 297.852295] nf_flow_offload_ipv6_hook+0x7f4/0x964 [nf_flow_table] [ 297.858466] nf_flow_rule_route_ipv6+0x438/0x4a4 [nf_flow_table] [ 297.864463] process_one_work+0x174/0x300 [ 297.868465] worker_thread+0x278/0x430 [ 297.872204] kthread+0xd8/0xdc [ 297.875251] ret_from_fork+0x10/0x20 [ 297.878820] Code: 928b5ae0 8b000273 91400a60 f943fa61 (79401421) [ 297.884901] ---[ end trace 0000000000000000 ]--- Fix the issue detecting the proper wed reference to use running wed callabacks. Fixes: 83eafc9251d6 ("wifi: mt76: mt7996: add wed tx support") Tested-by: Daniel Pawlik <pawlik.dan@gmail.com> Tested-by: Matteo Croce <teknoraver@meta.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20251008-wed-fixes-v1-1-8f7678583385@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18RAS: Report all ARM processor CPER information to userspaceJason Tian
[ Upstream commit 05954511b73e748d0370549ad9dd9cd95297d97a ] The ARM processor CPER record was added in UEFI v2.6 and remained unchanged up to v2.10. Yet, the original arm_event trace code added by e9279e83ad1f ("trace, ras: add ARM processor error trace event") is incomplete, as it only traces some fields of UAPI 2.6 table N.16, not exporting any information from tables N.17 to N.29 of the record. This is not enough for the user to be able to figure out what has exactly happened or to take appropriate action. According to the UEFI v2.9 specification chapter N2.4.4, the ARM processor error section includes: - several (ERR_INFO_NUM) ARM processor error information structures (Tables N.17 to N.20); - several (CONTEXT_INFO_NUM) ARM processor context information structures (Tables N.21 to N.29); - several vendor specific error information structures. The size is given by Section Length minus the size of the other fields. In addition, it also exports two fields that are parsed by the GHES driver when firmware reports it, e.g.: - error severity - CPU logical index Report all of these information to userspace via a the ARM tracepoint so that userspace can properly record the error and take decisions related to CPU core isolation according to error severity and other info. The updated ARM trace event now contains the following fields: ====================================== ============================= UEFI field on table N.16 ARM Processor trace fields ====================================== ============================= Validation handled when filling data for affinity MPIDR and running state. ERR_INFO_NUM pei_len CONTEXT_INFO_NUM ctx_len Section Length indirectly reported by pei_len, ctx_len and oem_len Error affinity level affinity MPIDR_EL1 mpidr MIDR_EL1 midr Running State running_state PSCI State psci_state Processor Error Information Structure pei_err - count at pei_len Processor Context ctx_err- count at ctx_len Vendor Specific Error Info oem - count at oem_len ====================================== ============================= It should be noted that decoding of tables N.17 to N.29, if needed, will be handled in userspace. That gives more flexibility, as there won't be any need to flood the kernel with micro-architecture specific error decoding. Also, decoding the other fields require a complex logic, and should be done for each of the several values inside the record field. So, let userspace daemons like rasdaemon decode them, parsing such tables and having vendor-specific micro-architecture-specific decoders. [mchehab: modified description, solved merge conflicts and fixed coding style] Signed-off-by: Jason Tian <jason@os.amperecomputing.com> Co-developed-by: Shengwei Luo <luoshengwei@huawei.com> Signed-off-by: Shengwei Luo <luoshengwei@huawei.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Daniel Ferguson <danielf@os.amperecomputing.com> # rebased Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Tested-by: Shiju Jose <shiju.jose@huawei.com> Acked-by: Borislav Petkov (AMD) <bp@alien8.de> Fixes: e9279e83ad1f ("trace, ras: add ARM processor error trace event") Link: https://uefi.org/specs/UEFI/2.10/Apx_N_Common_Platform_Error_Record.html#arm-processor-error-section Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18of/fdt: Consolidate duplicate code into helper functionsYuntao Wang
[ Upstream commit 8278cb72c60399f6dc6300c409879fb4c7291513 ] Currently, there are many pieces of nearly identical code scattered across different places. Consolidate the duplicate code into helper functions to improve maintainability and reduce the likelihood of errors. Signed-off-by: Yuntao Wang <yuntao.wang@linux.dev> Link: https://patch.msgid.link/20251115134753.179931-2-yuntao.wang@linux.dev Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Stable-dep-of: c85da64ce2c3 ("of/fdt: Fix incorrect use of dt_root_addr_cells in early_init_dt_check_kho()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18bpf: Fix invalid prog->stats access when update_effective_progs failsPu Lehui
[ Upstream commit 7dc211c1159d991db609bdf4b0fb9033c04adcbc ] Syzkaller triggers an invalid memory access issue following fault injection in update_effective_progs. The issue can be described as follows: __cgroup_bpf_detach update_effective_progs compute_effective_progs bpf_prog_array_alloc <-- fault inject purge_effective_progs /* change to dummy_bpf_prog */ array->items[index] = &dummy_bpf_prog.prog ---softirq start--- __do_softirq ... __cgroup_bpf_run_filter_skb __bpf_prog_run_save_cb bpf_prog_run stats = this_cpu_ptr(prog->stats) /* invalid memory access */ flags = u64_stats_update_begin_irqsave(&stats->syncp) ---softirq end--- static_branch_dec(&cgroup_bpf_enabled_key[atype]) The reason is that fault injection caused update_effective_progs to fail and then changed the original prog into dummy_bpf_prog.prog in purge_effective_progs. Then a softirq came, and accessing the members of dummy_bpf_prog.prog in the softirq triggers invalid mem access. To fix it, skip updating stats when stats is NULL. Fixes: 492ecee892c2 ("bpf: enable program stats") Signed-off-by: Pu Lehui <pulehui@huawei.com> Link: https://lore.kernel.org/r/20251115102343.2200727-1-pulehui@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18net: phy: Add helper for fixing RGMII PHY mode based on internal mac delayInochi Amaoto
[ Upstream commit 24afd7827efb7c69adfc41835390470e3eec4740 ] The "phy-mode" property of devicetree indicates whether the PCB has delay now, which means the mac needs to modify the PHY mode based on whether there is an internal delay in the mac. This modification is similar for many ethernet drivers. To simplify code, define the helper phy_fix_phy_mode_for_mac_delays(speed, mac_txid, mac_rxid) to fix PHY mode based on whether mac adds internal delay. Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk> Signed-off-by: Inochi Amaoto <inochiama@gmail.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20251114003805.494387-3-inochiama@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: db37c6e510de ("net: stmmac: dwmac-sophgo: Add phy interface filter") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18mshv: Fix deposit memory in MSHV_ROOT_HVCALLNuno Das Neves
[ Upstream commit 4cc1aa469cd6b714adc958547a4866247bfd60a9 ] When the MSHV_ROOT_HVCALL ioctl is executing a hypercall, and gets HV_STATUS_INSUFFICIENT_MEMORY, it deposits memory and then returns -EAGAIN to userspace. The expectation is that the VMM will retry. However, some VMM code in the wild doesn't do this and simply fails. Rather than force the VMM to retry, change the ioctl to deposit memory on demand and immediately retry the hypercall as is done with all the other hypercall helper functions. In addition to making the ioctl easier to use, removing the need for multiple syscalls improves performance. There is a complication: unlike the other hypercall helper functions, in MSHV_ROOT_HVCALL the input is opaque to the kernel. This is problematic for rep hypercalls, because the next part of the input list can't be copied on each loop after depositing pages (this was the original reason for returning -EAGAIN in this case). Introduce hv_do_rep_hypercall_ex(), which adds a 'rep_start' parameter. This solves the issue, allowing the deposit loop in MSHV_ROOT_HVCALL to restart a rep hypercall after depositing pages partway through. Fixes: 621191d709b1 ("Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs") Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18coresight: Change device mode to atomic typeLeo Yan
[ Upstream commit 693d1eaca940f277af24c74873ef2313816ff444 ] The device mode is defined as local type. This type cannot promise SMP-safe access. Change to atomic type and impose relax ordering, which ensures the SMP-safe synchronisation and the ordering between the mode setting and relevant operations. Fixes: 22fd532eaa0c ("coresight: etm3x: adding operation mode for etm_enable()") Reviewed-by: Mike Leach <mike.leach@linaro.org> Tested-by: James Clark <james.clark@linaro.org> Signed-off-by: Leo Yan <leo.yan@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20251111-arm_coresight_power_management_fix-v6-1-f55553b6c8b3@arm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18coresight: tmc: add the handle of the event to the pathCarl Worth
[ Upstream commit aaa5abcc9d44d2c8484f779ab46d242d774cabcb ] The handle is essential for retrieving the AUX_EVENT of each CPU and is required in perf mode. It has been added to the coresight_path so that dependent devices can access it from the path when needed. The existing bug can be reproduced with: perf record -e cs_etm//k -C 0-9 dd if=/dev/zero of=/dev/null Showing an oops as follows: Unable to handle kernel paging request at virtual address 000f6e84934ed19e Call trace: tmc_etr_get_buffer+0x30/0x80 [coresight_tmc] (P) catu_enable_hw+0xbc/0x3d0 [coresight_catu] catu_enable+0x70/0xe0 [coresight_catu] coresight_enable_path+0xb0/0x258 [coresight] Fixes: 080ee83cc361 ("Coresight: Change functions to accept the coresight_path") Signed-off-by: Carl Worth <carl@os.amperecomputing.com> Reviewed-by: Leo Yan <leo.yan@arm.com> Co-developed-by: Jie Gan <jie.gan@oss.qualcomm.com> Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20250925-fix_helper_data-v2-1-edd8a07c1646@oss.qualcomm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18entry,unwind/deferred: Fix unwind_reset_info() placementPeter Zijlstra
[ Upstream commit cf76553aaa363620f58a6b6409bf544f4bcfa8de ] Stephen reported that on KASAN builds he's seeing: vmlinux.o: warning: objtool: user_exc_vmm_communication+0x15a: call to __kasan_check_read() leaves .noinstr.text section vmlinux.o: warning: objtool: exc_debug_user+0x182: call to __kasan_check_read() leaves .noinstr.text section vmlinux.o: warning: objtool: exc_int3+0x123: call to __kasan_check_read() leaves .noinstr.text section vmlinux.o: warning: objtool: noist_exc_machine_check+0x17a: call to __kasan_check_read() leaves .noinstr.text section vmlinux.o: warning: objtool: fred_exc_machine_check+0x17e: call to __kasan_check_read() leaves .noinstr.text section This turns out to be atomic ops from unwind_reset_info() that have explicit instrumentation. Place unwind_reset_info() in the preceding instrumentation_begin() section. Fixes: c6439bfaabf2 ("Merge tag 'trace-deferred-unwind-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://patch.msgid.link/20251105100014.GY4068168@noisy.programming.kicks-ass.net Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18cleanup: fix scoped_class()Christian Brauner
[ Upstream commit 4e97bae1b412cd6ed8053b3d8a242122952985cc ] This is a class, not a guard so why on earth is it checking for guard pointers or conditional lock acquisition? None of it makes any sense at all. I'm not sure what happened back then. Maybe I had a brief psychedelic period that I completely forgot about and spaced out into a zone where that initial macro implementation made any sense at all. Link: https://patch.msgid.link/20251103-work-creds-init_cred-v1-1-cb3ec8711a6a@kernel.org Fixes: 5c21c5f22d07 ("cleanup: add a scoped version of CLASS()") Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18scsi: target: Fix LUN/device R/W and total command statsMike Christie
[ Upstream commit 95aa2041c654161d1b5c1eca5379d67d91ef1cf2 ] In commit 9cf2317b795d ("scsi: target: Move I/O path stats to per CPU") I saw we sometimes use %u and also misread the spec. As a result I thought all the stats were supposed to be 32-bit only. However, for the majority of cases we support currently, the spec specifies u64 bit stats. This patch converts the stats changed in the commit above to u64. Fixes: 9cf2317b795d ("scsi: target: Move I/O path stats to per CPU") Signed-off-by: Mike Christie <michael.christie@oracle.com> Reviewed-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Link: https://patch.msgid.link/20250917221338.14813-2-michael.christie@oracle.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18pidfs: add missing PIDFD_INFO_SIZE_VER1Christian Brauner
[ Upstream commit 4061c43a99772c66c378cfacaa71550ab3b35909 ] We grew struct pidfd_info not too long ago. Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-3-ca449b7b7aa0@kernel.org Fixes: 1d8db6fd698d ("pidfs, coredump: add PIDFD_INFO_COREDUMP") Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18perf: Remove get_perf_callchain() init_nr argumentJosh Poimboeuf
[ Upstream commit e649bcda25b5ae1a30a182cc450f928a0b282c93 ] The 'init_nr' argument has double duty: it's used to initialize both the number of contexts and the number of stack entries. That's confusing and the callers always pass zero anyway. Hard code the zero. Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Namhyung Kim <Namhyung@kernel.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/r/20250820180428.259565081@kernel.org Stable-dep-of: 23f852daa4ba ("bpf: Fix stackmap overflow check in __bpf_get_stackid()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18scsi: ufs: core: Move the ufshcd_enable_intr() declarationBart Van Assche
[ Upstream commit b30006b5bec1dcba207bc42e7f7cd96a568acc27 ] ufshcd_enable_intr() is not exported and hence should not be declared in include/ufs/ufshcd.h. Fixes: 253757797973 ("scsi: ufs: core: Change MCQ interrupt enable flow") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Peter Wang <peter.wang@mediatek.com> Link: https://patch.msgid.link/20251014200118.3390839-7-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18tty: introduce tty_port_tty guard()Jiri Slaby (SUSE)
[ Upstream commit e8398b8aed50382c21fcec77e80a5314e7c45c25 ] Having this, guards like these work: scoped_guard(tty_port_tty, port) tty_wakeup(scoped_tty()); See e.g. "tty_port: use scoped_guard()" later in this series. The definitions depend on CONFIG_TTY. It's due to tty_kref_put(). On !CONFIG_TTY, it is an inline and its declaration would conflict. The guards are not needed in that case, of course. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20250814072456.182853-3-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: d55f3d2375ce ("tty: serial: imx: Only configure the wake register when device is set as wakeup source") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18firmware: qcom: tzmem: fix qcom_tzmem_policy kernel-docRandy Dunlap
[ Upstream commit edd548dc64a699d71ea4f537f815044e763d01e1 ] Fix kernel-doc warnings by using correct kernel-doc syntax and formatting to prevent warnings: Warning: include/linux/firmware/qcom/qcom_tzmem.h:25 Enum value 'QCOM_TZMEM_POLICY_STATIC' not described in enum 'qcom_tzmem_policy' Warning: ../include/linux/firmware/qcom/qcom_tzmem.h:25 Enum value 'QCOM_TZMEM_POLICY_MULTIPLIER' not described in enum 'qcom_tzmem_policy' Warning: ../include/linux/firmware/qcom/qcom_tzmem.h:25 Enum value 'QCOM_TZMEM_POLICY_ON_DEMAND' not described in enum 'qcom_tzmem_policy' Fixes: 84f5a7b67b61 ("firmware: qcom: add a dedicated TrustZone buffer allocator") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20251017191323.1820167-1-rdunlap@infradead.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18inet: Avoid ehash lookup race in inet_ehash_insert()Xuanqiang Luo
[ Upstream commit 1532ed0d0753c83e72595f785f82b48c28bbe5dc ] Since ehash lookups are lockless, if one CPU performs a lookup while another concurrently deletes and inserts (removing reqsk and inserting sk), the lookup may fail to find the socket, an RST may be sent. The call trace map is drawn as follows: CPU 0 CPU 1 ----- ----- inet_ehash_insert() spin_lock() sk_nulls_del_node_init_rcu(osk) __inet_lookup_established() (lookup failed) __sk_nulls_add_node_rcu(sk, list) spin_unlock() As both deletion and insertion operate on the same ehash chain, this patch introduces a new sk_nulls_replace_node_init_rcu() helper functions to implement atomic replacement. Fixes: 5e0724d027f0 ("tcp/dccp: fix hashdance race for passive sessions") Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev> Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20251015020236.431822-3-xuanqiang.luo@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18rculist: Add hlist_nulls_replace_rcu() and hlist_nulls_replace_init_rcu()Xuanqiang Luo
[ Upstream commit 9c4609225ec1cb551006d6a03c7c4ad8cb5584c0 ] Add two functions to atomically replace RCU-protected hlist_nulls entries. Keep using WRITE_ONCE() to assign values to ->next and ->pprev, as mentioned in the patch below: commit efd04f8a8b45 ("rcu: Use WRITE_ONCE() for assignments to ->next for rculist_nulls") commit 860c8802ace1 ("rcu: Use WRITE_ONCE() for assignments to ->pprev for hlist_nulls") Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn> Link: https://patch.msgid.link/20251015020236.431822-2-xuanqiang.luo@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 1532ed0d0753 ("inet: Avoid ehash lookup race in inet_ehash_insert()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-18dt-bindings: clock: qcom,x1e80100-gcc: Add missing USB4 clocks/resetsKonrad Dybcio
[ Upstream commit e4c4f5a1ae18a7828c2bfaf9dfe2473632b92d1b ] Some of the USB4 muxes, RCGs and resets were not initially described. Add indices for them to allow extending the driver. Acked-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Bryan O'Donoghue <bod@kernel.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251003-topic-hamoa_gcc_usb4-v2-1-61d27a14ee65@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Stable-dep-of: 8abe970efea5 ("clk: qcom: gcc-x1e80100: Add missing USB4 clocks/resets") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07usb: gadget: udc: fix use-after-free in usb_gadget_state_workJimmy Hu
[ Upstream commit baeb66fbd4201d1c4325074e78b1f557dff89b5b ] A race condition during gadget teardown can lead to a use-after-free in usb_gadget_state_work(), as reported by KASAN: BUG: KASAN: invalid-access in sysfs_notify+0x2c/0xd0 Workqueue: events usb_gadget_state_work The fundamental race occurs because a concurrent event (e.g., an interrupt) can call usb_gadget_set_state() and schedule gadget->work at any time during the cleanup process in usb_del_gadget(). Commit 399a45e5237c ("usb: gadget: core: flush gadget workqueue after device removal") attempted to fix this by moving flush_work() to after device_del(). However, this does not fully solve the race, as a new work item can still be scheduled *after* flush_work() completes but before the gadget's memory is freed, leading to the same use-after-free. This patch fixes the race condition robustly by introducing a 'teardown' flag and a 'state_lock' spinlock to the usb_gadget struct. The flag is set during cleanup in usb_del_gadget() *before* calling flush_work() to prevent any new work from being scheduled once cleanup has commenced. The scheduling site, usb_gadget_set_state(), now checks this flag under the lock before queueing the work, thus safely closing the race window. Fixes: 5702f75375aa9 ("usb: gadget: udc-core: move sysfs_notify() to a workqueue") Cc: stable <stable@kernel.org> Signed-off-by: Jimmy Hu <hhhuuu@google.com> Link: https://patch.msgid.link/20251023054945.233861-1-hhhuuu@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07virtio-net: avoid unnecessary checksum calculation on guest RXJon Kohler
commit 1cd1c472343b06d6d32038636ce51bfa2251e3cf upstream. Commit a2fb4bc4e2a6 ("net: implement virtio helpers to handle UDP GSO tunneling.") inadvertently altered checksum offload behavior for guests not using UDP GSO tunneling. Before, tun_put_user called tun_vnet_hdr_from_skb, which passed has_data_valid = true to virtio_net_hdr_from_skb. After, tun_put_user began calling tun_vnet_hdr_tnl_from_skb instead, which passes has_data_valid = false into both call sites. This caused virtio hdr flags to not include VIRTIO_NET_HDR_F_DATA_VALID for SKBs where skb->ip_summed == CHECKSUM_UNNECESSARY. As a result, guests are forced to recalculate checksums unnecessarily. Restore the previous behavior by ensuring has_data_valid = true is passed in the !tnl_gso_type case, but only from tun side, as virtio_net_hdr_tnl_from_skb() is used also by the virtio_net driver, which in turn must not use VIRTIO_NET_HDR_F_DATA_VALID on tx. cc: stable@vger.kernel.org Fixes: a2fb4bc4e2a6 ("net: implement virtio helpers to handle UDP GSO tunneling.") Signed-off-by: Jon Kohler <jon@nutanix.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20251125222754.1737443-1-jon@nutanix.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07iio: buffer: support getting dma channel from the bufferNuno Sá
commit a514bb109eada64f798f1c86c17182229cc20fe7 upstream. Add a new buffer accessor .get_dma_dev() in order to get the struct device responsible for actually providing the dma channel. We cannot assume that we can use the parent of the IIO device for mapping the DMA buffer. This becomes important on systems (like the Xilinx/AMD zynqMP Ultrascale) where memory (or part of it) is mapped above the 32 bit range. On such systems and given that a device by default has a dma mask of 32 bits we would then need to rely on bounce buffers (to swiotlb) for mapping memory above the dma mask limit. In the process, add an iio_buffer_get_dma_dev() helper function to get the proper DMA device. Cc: stable@vger.kernel.org Reviewed-by: David Lechner <dlechner@baylibre.com> Signed-off-by: Nuno Sá <nuno.sa@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07iio: buffer-dma: support getting the DMA channelNuno Sá
commit f9c198c3ccaf90a1a265fb2ffa8d4b093c3b0784 upstream. Implement the .get_dma_dev() callback for DMA buffers by returning the device that owns the DMA channel. This allows the core DMABUF infrastructure to properly map DMA buffers using the correct device, avoiding the need for bounce buffers on systems where memory is mapped above the 32-bit range. The function returns the DMA queue's device, which is the actual device responsible for DMA operations in buffer-dma implementations. Cc: stable@vger.kernel.org Reviewed-by: David Lechner <dlechner@baylibre.com> Signed-off-by: Nuno Sá <nuno.sa@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-12-07mailbox: mtk-cmdq: Refine DMA address handling for the command bufferJason-JH Lin
[ Upstream commit a195c7ccfb7a21b8118139835e25936ec8722596 ] GCE can only fetch the command buffer address from a 32-bit register. Some SoCs support a 35-bit command buffer address for GCE, which requires a right shift of 3 bits before setting the address into the 32-bit register. A comment has been added to the header of cmdq_get_shift_pa() to explain this requirement. To prevent the GCE command buffer address from being DMA mapped beyond its supported bit range, the DMA bit mask for the device is set during initialization. Additionally, to ensure the correct shift is applied when setting or reading the register that stores the GCE command buffer address, new APIs, cmdq_convert_gce_addr() and cmdq_revert_gce_addr(), have been introduced for consistent operations on this register. The variable type for the command buffer address has been standardized to dma_addr_t to prevent handling issues caused by type mismatches. Fixes: 0858fde496f8 ("mailbox: cmdq: variablize address shift in platform") Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07Bluetooth: hci_core: lookup hci_conn on RX path on protocol sidePauli Virtanen
[ Upstream commit 79a2d4678ba90bdba577dc3af88cc900d6dcd5ee ] The hdev lock/lookup/unlock/use pattern in the packet RX path doesn't ensure hci_conn* is not concurrently modified/deleted. This locking appears to be leftover from before conn_hash started using RCU commit bf4c63252490b ("Bluetooth: convert conn hash to RCU") and not clear if it had purpose since then. Currently, there are code paths that delete hci_conn* from elsewhere than the ordered hdev->workqueue where the RX work runs in. E.g. commit 5af1f84ed13a ("Bluetooth: hci_sync: Fix UAF on hci_abort_conn_sync") introduced some of these, and there probably were a few others before it. It's better to do the locking so that even if these run concurrently no UAF is possible. Move the lookup of hci_conn and associated socket-specific conn to protocol recv handlers, and do them within a single critical section to cover hci_conn* usage and lookup. syzkaller has reported a crash that appears to be this issue: [Task hdev->workqueue] [Task 2] hci_disconnect_all_sync l2cap_recv_acldata(hcon) hci_conn_get(hcon) hci_abort_conn_sync(hcon) hci_dev_lock hci_dev_lock hci_conn_del(hcon) v-------------------------------- hci_dev_unlock hci_conn_put(hcon) conn = hcon->l2cap_data (UAF) Fixes: 5af1f84ed13a ("Bluetooth: hci_sync: Fix UAF on hci_abort_conn_sync") Reported-by: syzbot+d32d77220b92eddd89ad@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=d32d77220b92eddd89ad Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07Bluetooth: btusb: mediatek: Fix kernel crash when releasing mtk iso interfaceChris Lu
[ Upstream commit 4015b979767125cf8a2233a145a3b3af78bfd8fb ] When performing reset tests and encountering abnormal card drop issues that lead to a kernel crash, it is necessary to perform a null check before releasing resources to avoid attempting to release a null pointer. <4>[ 29.158070] Hardware name: Google Quigon sku196612/196613 board (DT) <4>[ 29.158076] Workqueue: hci0 hci_cmd_sync_work [bluetooth] <4>[ 29.158154] pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) <4>[ 29.158162] pc : klist_remove+0x90/0x158 <4>[ 29.158174] lr : klist_remove+0x88/0x158 <4>[ 29.158180] sp : ffffffc0846b3c00 <4>[ 29.158185] pmr_save: 000000e0 <4>[ 29.158188] x29: ffffffc0846b3c30 x28: ffffff80cd31f880 x27: ffffff80c1bdc058 <4>[ 29.158199] x26: dead000000000100 x25: ffffffdbdc624ea3 x24: ffffff80c1bdc4c0 <4>[ 29.158209] x23: ffffffdbdc62a3e6 x22: ffffff80c6c07000 x21: ffffffdbdc829290 <4>[ 29.158219] x20: 0000000000000000 x19: ffffff80cd3e0648 x18: 000000031ec97781 <4>[ 29.158229] x17: ffffff80c1bdc4a8 x16: ffffffdc10576548 x15: ffffff80c1180428 <4>[ 29.158238] x14: 0000000000000000 x13: 000000000000e380 x12: 0000000000000018 <4>[ 29.158248] x11: ffffff80c2a7fd10 x10: 0000000000000000 x9 : 0000000100000000 <4>[ 29.158257] x8 : 0000000000000000 x7 : 7f7f7f7f7f7f7f7f x6 : 2d7223ff6364626d <4>[ 29.158266] x5 : 0000008000000000 x4 : 0000000000000020 x3 : 2e7325006465636e <4>[ 29.158275] x2 : ffffffdc11afeff8 x1 : 0000000000000000 x0 : ffffffdc11be4d0c <4>[ 29.158285] Call trace: <4>[ 29.158290] klist_remove+0x90/0x158 <4>[ 29.158298] device_release_driver_internal+0x20c/0x268 <4>[ 29.158308] device_release_driver+0x1c/0x30 <4>[ 29.158316] usb_driver_release_interface+0x70/0x88 <4>[ 29.158325] btusb_mtk_release_iso_intf+0x68/0xd8 [btusb (HASH:e8b6 5)] <4>[ 29.158347] btusb_mtk_reset+0x5c/0x480 [btusb (HASH:e8b6 5)] <4>[ 29.158361] hci_cmd_sync_work+0x10c/0x188 [bluetooth (HASH:a4fa 6)] <4>[ 29.158430] process_scheduled_works+0x258/0x4e8 <4>[ 29.158441] worker_thread+0x300/0x428 <4>[ 29.158448] kthread+0x108/0x1d0 <4>[ 29.158455] ret_from_fork+0x10/0x20 <0>[ 29.158467] Code: 91343000 940139d1 f9400268 927ff914 (f9401297) <4>[ 29.158474] ---[ end trace 0000000000000000 ]--- <0>[ 29.167129] Kernel panic - not syncing: Oops: Fatal exception <2>[ 29.167144] SMP: stopping secondary CPUs <4>[ 29.167158] ------------[ cut here ]------------ Fixes: ceac1cb0259d ("Bluetooth: btusb: mediatek: add ISO data transmission functions") Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-01net: tls: Cancel RX async resync request on rcd_delta overflowShahar Shitrit
[ Upstream commit c15d5c62ab313c19121f10e25d4fec852bd1c40c ] When a netdev issues a RX async resync request for a TLS connection, the TLS module handles it by logging record headers and attempting to match them to the tcp_sn provided by the device. If a match is found, the TLS module approves the tcp_sn for resynchronization. While waiting for a device response, the TLS module also increments rcd_delta each time a new TLS record is received, tracking the distance from the original resync request. However, if the device response is delayed or fails (e.g due to unstable connection and device getting out of tracking, hardware errors, resource exhaustion etc.), the TLS module keeps logging and incrementing, which can lead to a WARN() when rcd_delta exceeds the threshold. To address this, introduce tls_offload_rx_resync_async_request_cancel() to explicitly cancel resync requests when a device response failure is detected. Call this helper also as a final safeguard when rcd_delta crosses its threshold, as reaching this point implies that earlier cancellation did not occur. Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/1761508983-937977-3-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-01net: tls: Change async resync helpers argumentShahar Shitrit
[ Upstream commit 34892cfec0c2d96787c4be7bda0d5f18d7dacf85 ] Update tls_offload_rx_resync_async_request_start() and tls_offload_rx_resync_async_request_end() to get a struct tls_offload_resync_async parameter directly, rather than extracting it from struct sock. This change aligns the function signatures with the upcoming tls_offload_rx_resync_async_request_cancel() helper, which will be introduced in a subsequent patch. Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/1761508983-937977-2-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-01drm/pcids: Split PTL pciids group to make wcl subplatformDnyaneshwar Bhadane
[ Upstream commit 6eb2e056b0e418718fc5a3cfe79bdb41d9a2851d ] To form the WCL platform as a subplatform of PTL in definition, WCL pci ids are splited into saparate group from PTL. So update the pciidlist struct to cover all the pci ids. v2: - Squash wcl description in single patch for display and xe.(jani,gustavo) Fixes: 3c0f211bc8fc ("drm/xe: Add Wildcat Lake device IDs to PTL list") Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://lore.kernel.org/r/20250922150317.2334680-2-dnyaneshwar.bhadane@intel.com (cherry picked from commit 32620e176443bf23ec81bfe8f177c6721a904864) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> [Rodrigo added the Fixes tag when porting it to fixes] Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-01xfrm: Determine inner GSO type from packet inner protocolJianbo Liu
[ Upstream commit 61fafbee6cfed283c02a320896089f658fa67e56 ] The GSO segmentation functions for ESP tunnel mode (xfrm4_tunnel_gso_segment and xfrm6_tunnel_gso_segment) were determining the inner packet's L2 protocol type by checking the static x->inner_mode.family field from the xfrm state. This is unreliable. In tunnel mode, the state's actual inner family could be defined by x->inner_mode.family or by x->inner_mode_iaf.family. Checking only the former can lead to a mismatch with the actual packet being processed, causing GSO to create segments with the wrong L2 header type. This patch fixes the bug by deriving the inner mode directly from the packet's inner protocol stored in XFRM_MODE_SKB_CB(skb)->protocol. Instead of replicating the code, this patch modifies the xfrm_ip2inner_mode helper function. It now correctly returns &x->inner_mode if the selector family (x->sel.family) is already specified, thereby handling both specific and AF_UNSPEC cases appropriately. With this change, ESP GSO can use xfrm_ip2inner_mode to get the correct inner mode. It doesn't affect existing callers, as the updated logic now mirrors the checks they were already performing externally. Fixes: 26dbd66eab80 ("esp: choose the correct inner protocol for GSO on inter address family tunnels") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-01ata: libata-scsi: Fix system suspend for a security locked driveNiklas Cassel
commit b11890683380a36b8488229f818d5e76e8204587 upstream. Commit cf3fc037623c ("ata: libata-scsi: Fix ata_to_sense_error() status handling") fixed ata_to_sense_error() to properly generate sense key ABORTED COMMAND (without any additional sense code), instead of the previous bogus sense key ILLEGAL REQUEST with the additional sense code UNALIGNED WRITE COMMAND, for a failed command. However, this broke suspend for Security locked drives (drives that have Security enabled, and have not been Security unlocked by boot firmware). The reason for this is that the SCSI disk driver, for the Synchronize Cache command only, treats any sense data with sense key ILLEGAL REQUEST as a successful command (regardless of ASC / ASCQ). After commit cf3fc037623c ("ata: libata-scsi: Fix ata_to_sense_error() status handling") the code that treats any sense data with sense key ILLEGAL REQUEST as a successful command is no longer applicable, so the command fails, which causes the system suspend to be aborted: sd 1:0:0:0: PM: dpm_run_callback(): scsi_bus_suspend returns -5 sd 1:0:0:0: PM: failed to suspend async: error -5 PM: Some devices failed to suspend, or early wake event detected To make suspend work once again, for a Security locked device only, return sense data LOGICAL UNIT ACCESS NOT AUTHORIZED, the actual sense data which a real SCSI device would have returned if locked. The SCSI disk driver treats this sense data as a successful command. Cc: stable@vger.kernel.org Reported-by: Ilia Baryshnikov <qwelias@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220704 Fixes: cf3fc037623c ("ata: libata-scsi: Fix ata_to_sense_error() status handling") Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-11-24mm/huge_memory: do not change split_huge_page*() target order silentlyZi Yan
commit 77008e1b2ef73249bceb078a321a3ff6bc087afb upstream. Page cache folios from a file system that support large block size (LBS) can have minimal folio order greater than 0, thus a high order folio might not be able to be split down to order-0. Commit e220917fa507 ("mm: split a folio in minimum folio order chunks") bumps the target order of split_huge_page*() to the minimum allowed order when splitting a LBS folio. This causes confusion for some split_huge_page*() callers like memory failure handling code, since they expect after-split folios all have order-0 when split succeeds but in reality get min_order_for_split() order folios and give warnings. Fix it by failing a split if the folio cannot be split to the target order. Rename try_folio_split() to try_folio_split_to_order() to reflect the added new_order parameter. Remove its unused list parameter. [The test poisons LBS folios, which cannot be split to order-0 folios, and also tries to poison all memory. The non split LBS folios take more memory than the test anticipated, leading to OOM. The patch fixed the kernel warning and the test needs some change to avoid OOM.] Link: https://lkml.kernel.org/r/20251017013630.139907-1-ziy@nvidia.com Fixes: e220917fa507 ("mm: split a folio in minimum folio order chunks") Signed-off-by: Zi Yan <ziy@nvidia.com> Reported-by: syzbot+e6367ea2fdab6ed46056@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/68d2c943.a70a0220.1b52b.02b3.GAE@google.com/ Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Pankaj Raghav <p.raghav@samsung.com> Reviewed-by: Wei Yang <richard.weiyang@gmail.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Barry Song <baohua@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Dev Jain <dev.jain@arm.com> Cc: Jane Chu <jane.chu@oracle.com> Cc: Lance Yang <lance.yang@linux.dev> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Mariano Pache <npache@redhat.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Christian Brauner <brauner@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2026-09-07 12:13:28 +0000