| Age | Commit message (Collapse) | Author |
|---|
|
The vsp1_du_setup_lif() function is used to configure and enable a
pipeline, as well as disable it, depending on the cfg argument being a
valid pointer or NULL. This creates a confusing API. Improve it by
splitting the function in two, a vsp1_du_enable() function to configure
a pipeline, and a vsp1_du_disable() function to disaple it.
Keep vsp1_du_setup_lif() as an inline wrapper for existing callers in
the DRM subsystem, to simplify merging. The callers will be updated
separately and the old API will then be removed.
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/20260511235637.3468558-3-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Just like the timer, the PMU has an interrupt cache that serves little
purpose. Drop it.
Reviewed-by: Oliver Upton <oupton@kernel.org>
Link: https://patch.msgid.link/20260520100200.543845-5-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The timer code makes use of a per-timer irq level cache, which
looks like a very minor optimisation to avoid taking a lock upon
updating the GIC view of the interrupt when it is unchanged from
the previous state.
This is coming in the way of more important correctness issues,
so get rid of the cache, which simplifies a couple of minor things.
Reviewed-by: Oliver Upton <oupton@kernel.org>
Link: https://patch.msgid.link/20260520100200.543845-4-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The userspace notification of interrupts is has a few problems:
- it is utterly pointless
- it is annoyingly split between detecting the need for notification
and the population of the interrupts in the run structure
We can't do anything about the former (yet), but the latter can be
addressed. If we detect that we must notify userspace, we know that
we are going to exit, as we populate the exit status. Which means
we can also populate the interrupt state at this stage and be done
with it.
This simplifies the structure of the code.
Reviewed-by: Oliver Upton <oupton@kernel.org>
Link: https://patch.msgid.link/20260520100200.543845-3-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The CAC block implements chromatic aberration correction. Expose it to
userspace using the extensible parameters format. This was tested on the
i.MX8MP platform, but based on available documentation it is also present
in the RK3399 variant (V10). Thus presumably also in later versions,
so no feature flag is introduced.
Signed-off-by: Barnabás Pőcze <barnabas.pocze@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20260511150957.581049-1-barnabas.pocze@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The name of the enum to hold the mapping of parameter buffer versions
have a typo in the name, correct it. While this is a uAPI header the
impact should be minimal as the enum is only used as a collection for
the one version number supported.
Fixes: e9d05e9d5db1 ("media: uapi: rkisp1-config: Add extensible params format")
Cc: stable@vger.kernel.org
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20260501190339.3449193-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The media_entity_cleanup() function is defined in media-entity.h as a
static inline no-op when CONFIG_MEDIA_CONTROLLER is enabled, and as a
no-op macro otherwise. This complexity is unneeded. Use a static inline
function in all cases.
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Link: https://patch.msgid.link/20260506165438.1767378-2-laurent.pinchart@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The media_entity_pads_init() function name is misspelled. Fix it.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Link: https://patch.msgid.link/20260506165438.1767378-1-laurent.pinchart@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Blamed commit moved the TIME_WAIT-derived ISN from the skb control
block to a per-CPU variable, assuming the value would always be consumed
by tcp_conn_request() for the same packet that wrote it. That assumption
is violated by multiple drop paths between the producer
(__this_cpu_write(tcp_tw_isn, isn) in tcp_v{4,6}_rcv()) and the consumer
(tcp_conn_request()):
- min_ttl / min_hopcount check
- xfrm policy check
- tcp_inbound_hash() MD5/AO mismatch
- tcp_filter() eBPF/SO_ATTACH_FILTER drop
- th->syn && th->fin discard in tcp_rcv_state_process() TCP_LISTEN
- psp_sk_rx_policy_check() in tcp_v{4,6}_do_rcv()
- tcp_checksum_complete() in tcp_v{4,6}_do_rcv()
- tcp_v{4,6}_cookie_check() returning NULL
When a packet is dropped on any of these paths, tcp_tw_isn is left set.
The next SYN processed on the same CPU then consumes the non zero value in
tcp_conn_request(), receiving a potentially predictable ISN.
This patch moves back tcp_tw_isn to skb->cb[], getting rid of the per-cpu
variable.
Note that tcp_v{4,6}_fill_cb() do not set it.
Very litle impact on overall code size/complexity:
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/0 grow/shrink: 2/1 up/down: 8/-15 (-7)
Function old new delta
tcp_v6_rcv 3038 3042 +4
tcp_v4_rcv 3035 3039 +4
tcp_conn_request 2938 2923 -15
Total: Before=24436060, After=24436053, chg -0.00%
Fixes: 41eecbd712b7 ("tcp: replace TCP_SKB_CB(skb)->tcp_tw_isn with a per-cpu field")
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260519084611.2485277-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Store the per-DMB connection pointers in the SMCD device allocation
instead of allocating a separate connection array.
This keeps the connection table tied to the SMCD device lifetime and
simplifies the allocation and cleanup paths.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Sidraya Jayagond <sidraya@linux.ibm.com>
Link: https://patch.msgid.link/20260519005206.628071-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Change the krb5 crypto library to provide facilities to precheck the length
of the message about to be decrypted or verified.
Fix AF_RXRPC to make use of this to validate DATA packets secured with
RxGK.
Fixes: 9d1d2b59341f ("rxrpc: rxgk: Implement the yfs-rxgk security class (GSSAPI)")
Closes: https://sashiko.dev/#/patchset/20260511160753.607296-1-dhowells%40redhat.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: Simon Horman <horms@kernel.org>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: linux-afs@lists.infradead.org
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Link: https://patch.msgid.link/20260515230516.2718212-2-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Recent commit changed the semantics from NOT_VALID to VALID.
I didn't realize that the flags are not stored atomically
with the entry in XArray. There's still a race of reader
observing a VALID mark for a slot, getting interrupted,
writer replacing the entry with a different one, reader
continuing, fetching the entry which is now a different
pointer than the pointer for which VALID was meant.
The biggest consequence of this is that we may see a UAF
since net_shaper_rollback() assumed that entries without
VALID can be freed without observing RCU.
Looks like the XArray marks are buying us nothing at this
point. Let's convert the code to an explicit valid field.
The smp_load_acquire() / smp_store_release() barriers are
marginally cleaner.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: 93954b40f6a4 ("net-shapers: implement NL set and delete operations")
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260515221325.1685455-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The mdacon driver supports using ISA MDA or Hercules-compatible display
adapters as a secondary text console. This was commonly used in the
1990s and earlier for debugging software which took over the primary
display. It is highly unlikely anyone is doing so nowadays because
serial consoles and much better methods of debugging exist.
The driver is not enabled by any defconfig, nor any of the
dozens of distro configs collected at [1]. It has been relegated to VTs
13-16 since commit 0b9cf3aa6b1e ("mdacon messing up default vc's - set
default to vc13-16 again") in Linux 2.6.27 (and before Linux 2.5.53 -
see the link in the message of the above commit). The change in 2.6.27
was done because it was incorrectly detecting non-MDA adapters as MDA
and taking over all VTs, rendering them unusable.
Furthermore, vgacon supports using MDA/Hercules-compatible adapters as
the primary text console, so any systems with only one of these
adapters were already using vgacon and will not experience any loss in
functionality from the removal of this driver.
Given all of these factors, the mdacon driver is likely entirely
unused. Remove it.
[1] https://github.com/nyrahul/linux-kernel-configs/tree/f0bee86a135a0406ea427855f52702dd00d770f9
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Since "vfio/pci: Set up barmap in vfio_pci_core_enable()", the
resource request and iomap for the BARs was performed early, and
vfio_pci_core_setup_barmap() just checks those actions succeeded.
Move this logic to a new helper that checks success and returns the
iomap address, replacing the various bare vdev->barmap[] lookups.
This maintains the error behaviour of the previous on-demand
vfio_pci_core_setup_barmap() scheme.
Signed-off-by: Matt Evans <mattev@meta.com>
Link: https://lore.kernel.org/r/20260511145829.2993601-4-mattev@meta.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
The ldo_vcn33_[12]_wifi and ldo_vcn33_[12]_bt are just two regulator
outputs instead of four. The wifi and bt parts refer to separate enable
bits that are OR-ed together to affect the actual regulator output. The
separate bits allow the wifi and bt stacks to enable their power without
coordination between them. These have been deprecated in favor of proper
nodes matching the output.
Add proper ldo_vcn33_[12] regulators to replace the existing ones. The
enable status is synced to just one of the two enable bits, and the
other is forced off. This makes the handling in other bits simpler.
The existing *_(bt|wifi) regulators are converted to no-op regulators
that are fed from their new respective ldo_vcn33_[12] regulator. This
allows existing device trees to continue to work.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20260514091520.2718987-7-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
__bf_shf() is currently based on built-in ffsll. It's more
straightforward to wire it to __builtin_ctzll, which makes it a pure
rename.
Worth to notice that __builtin_ffsll() is buggy on GCC before 14.1:
int main() {
sizeof(struct {
int t : !(__builtin_ffsll(~0ULL) + 1 < 0);
});
}
test.c: In function 'main':
test.c:3:21: error: bit-field 't' width not an integer constant
3 | int t : !(__builtin_ffsll(~0ULL) + 1 < 0);
| ^
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=124699
Reported-by: Matt Coster <matt.coster@imgtec.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603222211.A2XiR1YU-lkp@intel.com/
Signed-off-by: Yury Norov <ynorov@nvidia.com>
|
|
Fix the function prototypes to use the common parameter name 'addr'
instead of 'p' (common to arch-specific implementations of these
functions).
This avoids the kernel-doc warnings:
Warning: include/asm-generic/bitops/lock.h:19 function parameter 'p'
not described in 'arch_test_and_set_bit_lock'
Warning: include/asm-generic/bitops/lock.h:41 function parameter 'p'
not described in 'arch_clear_bit_unlock'
Warning: include/asm-generic/bitops/lock.h:59 function parameter 'p'
not described in 'arch___clear_bit_unlock'
Fixes: 84c6591103db ("locking/atomics, asm-generic/bitops/lock.h: Rewrite using atomic_fetch_*()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
The bitfields are designed in assumption that fields contain unsigned
integer values, thus extracting the values from the field implies
zero-extending.
Some drivers need to sign-extend their fields, and currently do it like:
dc_re += sign_extend32(FIELD_GET(0xfff000, tmp), 11);
dc_im += sign_extend32(FIELD_GET(0xfff, tmp), 11);
It's error-prone because it relies on user to provide the correct
index of the most significant bit and proper 32 vs 64 function flavor.
Thus, introduce a FIELD_GET_SIGNED(). With the new API, the above
snippet turns into the more convenient:
dc_re += FIELD_GET_SIGNED(0xfff000, tmp);
dc_im += FIELD_GET_SIGNED(0xfff, tmp);
It compiles (on x86_64) into just a couple instructions: shl and sar.
When the mask includes MSB, the '<< __builtin_clzll(mask)' part becomes
a NOP, and the compiler only emits a single sar:
long long foo(long long reg)
{
10: f3 0f 1e fa endbr64
return FIELD_GET_SIGNED(GENMASK_ULL(63, 60), reg);
14: 48 89 f8 mov %rdi,%rax
17: 48 c1 f8 3c sar $0x3c,%rax
}
32-bit code generation is equally well. On arm32:
long long foo(long long reg)
{
return FIELD_GET_SIGNED(0x00f00000ULL, reg);
}
generates:
foo(long long):
lsls r1, r0, #8
asrs r0, r1, #28
asrs r1, r1, #31
bx lr
Signed-off-by: Yury Norov <ynorov@nvidia.com>
|
|
Add VIRTGPU_PARAM_BLOB_ALIGNMENT as a param that can be read with
VIRTGPU_GETPARAM by userspace applications running in the guest to
obtain the host's page size and find out the right alignment to be used
in shared memory allocations.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patch.msgid.link/20260428194450.518296-4-slp@redhat.com
|
|
Support VIRTIO_GPU_F_BLOB_ALIGNMENT, a feature that indicates the device
provides a valid blob_alignment field in its configuration, and that
both RESOURCE_CREATE_BLOB and RESOURCE_MAP_BLOB requests must be aligned
to that value.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patch.msgid.link/20260428194450.518296-2-slp@redhat.com
|
|
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> says:
This is v3 to move card->pop_time to soc-dapm.
card->pop_time is used only on TI, and Janusz posted patch which will stop
using it. It was posted at 12 Apr 2026, and [1/2] is it as-is.
[2/2] will move card->pop_time to soc-dapm. We can use it via debugfs.
I have added [RFC] on Subject.
Link: https://patch.msgid.link/87wlx9wj1h.wl-kuninori.morimoto.gx@renesas.com
|
|
Card has pop_time which have used only from TI, and it is now stop using
it. This pop_time is used for debug, and can be access from debugfs.
Let's move it from Card to soc-dapm.c local.
This patch renames it as asoc/${card}/pop_time to asoc/dapm_pop_time.
This patch moves it from Card to soc-dapm.c, tidyup soc-dapm.c
accordingly, and remove card->pop_time from cx20442.c which is no longer
needed.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87tssdwj0p.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/drivers
Renesas driver updates for v7.2
- Add Multifunctional Interface (MFIS) mailbox and product register
support for R-Car X5H,
- Miscellaneous fixes and improvements.
* tag 'renesas-drivers-for-v7.2-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
soc: renesas: Convert to of_machine_get_match()
soc: renesas: Add R-Car X5H PRR support
soc: renesas: Add Renesas R-Car MFIS driver
dt-bindings: soc: renesas: Document MFIS IP core
soc: renesas: r9a09g057-sys: Move common code to a helper
soc: renesas: r9a09g056-sys: Move common code to a helper
soc: renesas: r9a09g047-sys: Move common code to a helper
soc: renesas: r9a08g046-sysc: Move common code to a helper
soc: renesas: r9a08g045-sysc: Move common code to a helper
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add a function that takes the DBE information and parses it
into an existing chandef that should hold the BSS channel.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260515141209.4eb1490f5cc6.I3ca9421f1fe4c31073846b1b62017f12c75889de@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Commit 5f9c23abc477 ("firmware: smccc: Support optional Arm SMCCC SOC_ID
name") introduced the SOC_ID name string call, which reports a human
readable string describing the SoC, as returned by firmware.
The SMCCC spec v1.6 describes this feature as AArch64 only, since we rely
on 8 characters to be transmitted per register. Consequently the SMCCC
call must use the AArch64 calling convention, which requires bit 30 of
the FID to be set. The spec is a bit confusing here, since it mentions
that in the parameter description ("2: SoC name (optionally implemented for
SMC64 calls, ..."), but still prints the FID explicitly as 0x80000002.
But as this FID is using the SMC32 calling convention (correct for the
other two calls), it will not match what any SMCCC conformant firmware is
expecting, so any call would return NOT_SUPPORTED.
Add a 64-bit version of the ARCH_SOC_ID FID macro, and use that for the
SoC name version of the call to fix the issue.
Fixes: 5f9c23abc477 ("firmware: smccc: Support optional Arm SMCCC SOC_ID name")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250902172053.304911-1-andre.przywara@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
|
|
The tee_ioctl_object_invoke_arg structure has padding on some
architectures but not on x86-32 and a few others:
include/linux/tee.h:474:32: error: padding struct to align 'params' [-Werror=padded]
I expect that all current users of this are on architectures that do
have implicit padding here (arm64, arm, x86, riscv), so make the padding
explicit in order to avoid surprises if this later gets used elsewhere.
Fixes: d5b8b0fa1775 ("tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Tested-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
drivers-for-7.2
Merge the initial set of UBWC rework through a topic branch, to allow it
being shared with the DRM/MSM branch for the continuation.
|
|
Adreno and MDSS drivers need to know whether to enable AMSBC. Add
separate helper, describing that feature.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260507-ubwc-rework-v4-4-c19593d20c1d@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Define special helper returning version setting for MDSS and A8xx
drivers.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260507-ubwc-rework-v4-3-c19593d20c1d@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Follow the comment for the macrotile_mode and introduce separate
revision for UBWC 3.0 + 8-channel macrotiling mode. It is not used by
the database (since the drivers are not yet changed to handle it yet).
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260507-ubwc-rework-v4-2-c19593d20c1d@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
In an internal review from Airoha, it was notice that the RX DMA descriptor
bits and mask are wrong. These values probably refer to an old NPU firmware
never published. The previous value works correctly but it was reported
that in some specific condition in mixed scenario with both Ethernet and
WiFi offload it's possible that RX DMA descriptor signal wrong value with
the problem to the RX ring or packets getting dropped.
To handle these specific scenario, apply the new suggested bits mask from
Airoha.
Correct functionality of both AN7581 NPU and MT7996 variant were verified
and confirmed working.
Fixes: a7fc8c641cab ("net: airoha: Fix npu rx DMA definitions")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260518134530.3683-1-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sashiko points out the legacy write path in ib_uverbs_write() does
allocate a struct uverbs_attr_bundle, but it doesn't wrap it in a
bundle_priv so downcasting here isn't safe.
Instead lift the method_elm out of the bundle_priv and use it for the
debug function. The legacy write path will leave it set as NULL since the
write method_elm uses a different type.
Cc: stable@vger.kernel.org
Fixes: 1de9287ece44 ("RDMA: Add ib_copy_validate_udata_in()")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Niklas Cassel:
- Make sure that the issuing of a deferred non-NCQ command via
workqueue feature is only used when mixing NCQ and non-NCQ commands
to the same link (i.e. return value ATA_DEFER_LINK), and nothing
else. This way we will not incorrectly try to use the feature for
e.g. PATA drivers
- The deferred non-NCQ command was stored in a per-port struct. When
using Port Multipliers with FIS-Based Switching, we would thus
needlessly defer commands to all other links. Store the deferred QC
in a per-link struct, such that Port Multipliers with FBS will get
the same performance as before
- The issuing of a deferred non-NCQ command via workqueue feature broke
support for Port Multipliers using Command-Based Switching. The
issuing of a deferred non-NCQ command via workqueue feature is not
compatible with the use of ap->excl_link, which PMPs with CBS use for
fairness (using implicit round robin)
* tag 'ata-7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-scsi: do not needlessly defer commands when using PMP with FBS
ata: libata-scsi: do not use the deferred QC feature on PMPs with CBS
ata: libata-scsi: do not use the deferred QC feature for ATA_DEFER_PORT
ata: libata-scsi: improve readability of ata_scsi_qc_issue()
|
|
Modern systems may have more than 16 PPS sources and current hard-coded
limit breaks registration of some devices. Let's bump the limit to 256
in hope it will be enough in foreseen future.
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Link: https://patch.msgid.link/20260515135028.2021318-1-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove extra semicolons from comments.
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"14 hotfixes. 9 are for MM. 10 are cc:stable and the remainder are for
post-7.1 issues or aren't deemed suitable for backporting.
There's a two-patch MAINTAINERS series from Mike Rapoport which
updates us for the new KEXEC/KDUMP/crash/LUO/etc arrangements. And
another two-patch series from Muchun Song to fix a couple of
memory-hotplug issues. Otherwise singletons, please see the changelogs
for details"
* tag 'mm-hotfixes-stable-2026-05-18-21-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/memory: fix spurious warning when unmapping device-private/exclusive pages
mm: fix __vm_normal_page() to handle missing support for pmd_special()/pud_special()
drivers/base/memory: fix memory block reference leak in poison accounting
mm/memory_hotplug: fix memory block reference leak on remove
lib: kunit_iov_iter: fix test fail on powerpc
mm/page_alloc: fix initialization of tags of the huge zero folio with init_on_free
MAINTAINERS: add kexec@ list to LIVE UPDATE ENTRY
MAINTAINERS: add tree for KDUMP and KEXEC
selftests/mm: run_vmtests.sh: fix destructive tests invocation
scripts/gdb: slab: update field names of struct kmem_cache
scripts/gdb: mm: cast untyped symbols in x86_page_ops
mm/damon: fix damos_stat tracepoint format for sz_applied
mm/damon/sysfs-schemes: call missing mem_cgroup_iter_break()
mm/migrate_device: fix spinlock leak in migrate_vma_insert_huge_pmd_page
|
|
Praveen Talari <praveen.talari@oss.qualcomm.com> says:
Add tracepoints to the Qualcomm GENI (Generic Interface) SPI driver.
These trace events enable runtime debugging and performance analysis
of SPI operations.
The trace events capture SPI clock configuration, setup parameters,
transfer details, interrupt status.
Usage examples:
Enable all SPI traces:
echo 1 > /sys/kernel/tracing/events/spi/enable
echo 1 > /sys/kernel/debug/tracing/events/qcom_geni_spi/enable
cat /sys/kernel/debug/tracing/trace_pipe
Example trace output:
1003.956560: spi_message_submit: spi16.0 000000001b20b93c
1003.956642: spi_controller_busy: spi16
1003.956643: spi_message_start: spi16.0 000000001b20b93c
1003.956646: geni_spi_setup_params: 888000.spi: cs=0 mode=0x00000020
mode_changed=0x00000007 cs_changed=0
1003.956647: spi_set_cs: spi16.0 activate
1003.956648: spi_transfer_start: spi16.0 00000000ea1cf8b6 len=16
tx=[4c-80-e4-ca-68-4d-95-aa-ee-99-ae-d7-69-e9-5f-39]
rx=[00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00]
1003.956653: geni_spi_clk_cfg: 888000.spi: req_hz=20000000
sclk_hz=100000000 clk_idx=5 clk_div=5 bpw=8
1003.956691: geni_spi_transfer: 888000.spi: len=16 m_cmd=0x00000003
1003.956708: geni_spi_irq: 888000.spi: m_irq=0x08000081
dma_tx=0x00000000 dma_rx=0x00000000
1003.956717: spi_transfer_stop: spi16.0 00000000ea1cf8b6 len=16
tx=[4c-80-e4-ca-68-4d-95-aa-ee-99-ae-d7-69-e9-5f-39]
rx=[4c-80-e4-ca-68-4d-95-aa-ee-99-ae-d7-69-e9-5f-39]
1003.956717: spi_set_cs: spi16.0 deactivate
1003.956718: spi_message_done: spi16.0 000000001b20b93c len=16/16
Link: https://patch.msgid.link/20260518-add-tracepoints-for-qcom-geni-spi-v3-0-7928f6810a79@oss.qualcomm.com
|
|
Add tracepoint support to the Qualcomm GENI SPI driver to provide
runtime visibility into driver behavior without requiring invasive debug
patches.
The trace events cover clock and setup parameter configuration,
transfer metadata, interrupt status to be making it easier to diagnose
communication issues in the field..
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Link: https://patch.msgid.link/20260518-add-tracepoints-for-qcom-geni-spi-v3-1-7928f6810a79@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This adds ConfigFS support to USB4/Thunderbolt bus. By itself this just
creates the subsystem but it exposes functions that can be used to
register groups under it.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
This allows the caller to wait for the ring to be empty. We are going to
need this in the upcoming userspace tunneling support.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Add to common header a function that returns size of the ring. This can
be used in the drivers instead of rolling own version.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Instead of the core driver programming fixed value for throttling let
the service drivers to specify the interval if they need this.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
This function can be used outside of thunderbolt networking driver so
move it to the common header.
No functional changes.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
The XDomain properties can be useful for service drivers, for example to
implement a registry for the services they expose. So far there has been
no need for service drivers to specify these but with the USB4STREAM
driver that we are going to use them.
This adds remote and local side properties that the service drivers have
access to. Remote side is read-only but the local side can be changed by
a service driver. Also provide a mechanism to notify the remote side
that there are changes.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
This allows merging one XDomain property directory into another. We are
going to use this in the subsequent patch.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Drop comments about CEC 2.0 from cec-funcs.h.
In cec.h clearly comment messages that are CEC 2.0 specific
as such. Also rename references to HDMI 2.0 to CEC 2.0.
The <Request/Report Current Latency> messages were marked
as CEC 2.0 only. That is wrong, these messages are explicitly
allowed for any CEC version.
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Link: https://patch.msgid.link/098789ee233f777d5ad87a72f09a997373c98d25.1779115235.git.hverkuil+cisco@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Message-ID: <098789ee233f777d5ad87a72f09a997373c98d25.1779115235.git.hverkuil+cisco@kernel.org>
|
|
Add support for the new Latency Indication Protocol feature.
This adds the opcodes and the wrapper functions.
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Link: https://patch.msgid.link/8dac7c99b7eab4fcc11d76d50dd08fb4448672f4.1779115235.git.hverkuil+cisco@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Message-ID: <8dac7c99b7eab4fcc11d76d50dd08fb4448672f4.1779115235.git.hverkuil+cisco@kernel.org>
|
|
Enable context analysis for struct rt_mutex and annotate all functions that
accept a struct rt_mutex pointer. In the __rt_mutex_lock_common() callers,
instead of adding the __no_context_analysis annotation, emit a runtime
warning if the __rt_mutex_lock_common() return value is not zero and add an
__acquire() statement.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260508174520.1416285-1-bvanassche@acm.org
|
|
Recent optimizations of sd->shared assignment moved to allocating a
single instance of per-CPU sched_domain_shared objects per s_data.
Recent optimizations to select_idle_capacity() moved the sd->shared
assignments to "sd_asym" domain when ASYM_CPUCAPACITY is detected but
cache-aware scheduling mandates the presence of "sd_llc_shared" to
compute and cache per-LLC statistics.
Use an "alloc_flags" union in sched_domain_shared to claim a
sched_domain_shared object per sched_domain. Allocation starts searching
for an available / matching sched_domain_shared instance from the first
CPU of sched_domain_span(sd) (sd can be sd_llc, or sd_asym). If the
shared object is claimed by another domain, the instance corresponding
to next CPU in the domain span is explored until a matching / available
instance is found.
In case of a single CPU in sched_domain_span(), the domain will be
degenerated and a temporary overlap of ->shared objects across different
domains is acceptable.
"alloc_flags" forms a union with "nr_idle_scan" and the stale flags are
left as is when the sd->shared is published. The expectation is for the
first load balancing instance to correct the value just like the current
behavior, except the initial value is no longer 0.
Originally-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Andrea Righi <arighi@nvidia.com>
|
|
Merge the cache aware balancer topic branch.
# Conflicts:
# kernel/sched/topology.c
|
