| Age | Commit message (Collapse) | Author |
|---|
|
Now, that cpu_smt_mask is defined as cpumask_of(cpu) for
CONFIG_SCHED_SMT=n, it is possible to get rid of the ifdeffery.
Effectively,
- This makes sched_smt_present is defined always
- cpumask_weight(cpumask_of(cpu)) == 1. So sched_smt_present_inc/dec
will never enable the sched_smt_present. Which is expected.
- Paths that were compile-time eliminated become runtime guarded
using static keys.
- Defines set_idle_cores, test_idle_cores, etc which could likely benefit
the CONFIG_SCHED_SMT=n systems to use the same optimizations within the
LLC at wakeups.
- This will expose sched_smt_present symbol for CONFIG_SCHED_SMT=n.
Likely not a concern.
- There is a bloat of code CONFIG_SCHED_SMT=n. (NR_CPUS=2048)
add/remove: 24/18 grow/shrink: 26/28 up/down: 6396/-3188 (3208)
Total: Before=30629880, After=30633088, chg +0.01%
- No code bloat for CONFIG_SCHED_SMT=y, which is expected.
- Add comments around stop_core_cpuslocked on why ifdefs are not
removed.
- This leaves the remaining uses of CONFIG_SCHED_SMT mainly for
topology building bits which has a policy based decision.
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://patch.msgid.link/20260515172456.542799-3-sshegde@linux.ibm.com
|
|
Define cpu_smt_mask in case of CONFIG_SCHED_SMT=n as cpumask_of that
CPU. With that config, it is expected that kernel treats each CPU
as individual core. Using cpumask_of(cpu) reflects that.
This would help to get rid of the ifdeffery that is spread across
the codebase since cpu_smt_mask is defined only in case of
CONFIG_SCHED_SMT=y.
Note: There is no arch today which defines cpu_smt_mask unconditionally.
So likely defining the cpu_smt_mask shouldn't lead redefinition errors.
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://patch.msgid.link/20260515172456.542799-2-sshegde@linux.ibm.com
|
|
When CONFIG_HAVE_UNSTABLE_SCHED_CLOCK is disabled, sched_clock() is
already assumed to provide stable semantics, but the public header
doesn't provide a sched_clock_stable() stub for that case.
Add a header stub that always returns true and clean up the duplicate
local stub in ring_buffer.c, so callers can use sched_clock_stable()
unconditionally.
Signed-off-by: Yiyang Chen <cyyzero16@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Link: https://patch.msgid.link/56e45338858946cd9581b75c8bd45dd37dba52c5.1778773587.git.cyyzero16@gmail.com
|
|
Reasons:
- lenovo-wmi-* feature work
- an important WMI core fix
|
|
drm_of_find_panel_or_bridge() is widely used, but many callers pass NULL
into the @panel or the @bridge arguments, thus making a very partial usage
of this rather complex function.
Besides, the bridge returned in @bridge is not refcounted, thus making this
API unsafe when DRM bridge hotplug will be introduced.
Solve both issues for the cases of calls to drm_of_find_panel_or_bridge()
with a NULL @panel pointer by adding a new function that only looks for
bridges (and is thus much simpler) and increments the refcount of the
returned bridge.
The new function is identical to drm_of_find_panel_or_bridge() except it:
- handles bridge refcounting: uses of_drm_find_and_get_bridge() instead of
of_drm_find_bridge() internally to return a refcounted bridge
- is simpler to use: just takes no @panel parameter, returns the pointer
in the return value instead of a double pointer argument
- has a simpler implementation: it is equal to
drm_of_find_panel_or_bridge() after removing the code that becomes dead
when @panel == NULL
Also add this function to drm_bridge.c and not drm_of.c because it returns
bridges only.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20260511-drm-bridge-alloc-getput-panel_or_bridge-v6-2-f61c9e498b3f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
Generating the ARM SMMUv3 and RISC-V invalidation commands optimally
requires some additional details from iommupt:
- leaf_levels_bitmap is used to compute the ARM Range Invalidation
Table Top Level hint
- leaf_levels_bitmap is also used to compute the stride when
generating single invalidations to invalidate once per leaf
- table_levels_bitmap also computes the ARM TTL for future cases when
there are no leaves
Put these under a feature since only two drivers need to calculate
them.
This is also useful for the coming kunit iotlb invalidation test to
know more about what invalidation is happening.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Tested-by: Andrew Jones <andrew.jones@oss.qualcomm.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Use in-line member documentation and add some small clarifications to
the members. This is preparation to add more members.
- Note that pgsize is only used by arm-smmuv3
- Note that freelist is only used by iommupt
- Reword queued to emphasize the flush-all behavior
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Tested-by: Andrew Jones <andrew.jones@oss.qualcomm.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Nord is a SoC family from Qualcomm designed as the next generation of
Lemans series. SA8797P is the automotive variant of Nord, where platform
resources such as clocks, regulators, interconnects, etc. are managed
by firmware through SCMI.
Add SoC ID for Nord SA8797P.
Signed-off-by: Deepti Jaggi <deepti.jaggi@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260427003531.229671-2-shengchao.guo@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Document the ID for SM7750, an Eliza SoC variant that can be found on
the Nothing Phone (4a) Pro.
Signed-off-by: Alexander Koskovich <akoskovich@pm.me>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260412-sm7550-id-v1-1-958a673ff791@pm.me
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Some virtual devices like netkit (or ifb) never DMA and never touch frag
contents, they just forward the skb to another device. They are unable
to forward unreadable skbs, however, because they fail to pass TX
validation checks on dev->netmem_tx. The existing two-state
NETMEM_TX_NONE / NETMEM_TX_DMA doesn't give the TX validator enough
information to differentiate devices that will attempt DMA on the
unreadable skb from those that will simply route it untouched.
Add a third mode to the enum so drivers can indicate 1) if they have
netmem TX support, and 2) if they do, whether they are DMA-capable:
NETMEM_TX_NO_DMA - pass-through, device never DMAs
Widen dev->netmem_tx from a 1-bit field to 2 bits to fit the new value,
and declare netkit as NETMEM_TX_NO_DMA. Devmem TX support over these
devices comes in a follow-up patch.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260514-tcp-dm-netkit-v5-2-408c59b91e66@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Devices that support netmem TX previously set dev->netmem_tx = true.
This was checked in validate_xmit_unreadable_skb() to drop unreadable
skbs (skbs with dmabuf-backed frags) before they reach drivers that
would mishandle them or devices that would not have the iommu mappings
for them.
A subsequent patch will introduce a third state for virtual devices
that forward unreadable skbs without ever performing DMA on them. To
prepare for that, convert the boolean dev->netmem_tx into an enum:
NETMEM_TX_NONE - no netmem TX support (drop unreadable skbs)
NETMEM_TX_DMA - full support, device does DMA
Update the existing NIC drivers (bnxt, gve, mlx5, fbnic) and the
validators in net/core to use the new enum. No functional change.
Acked-by: Harshitha Ramamurthy <hramamurthy@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260514-tcp-dm-netkit-v5-1-408c59b91e66@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The last user was removed in commit 72628da6d634 ("net: ks8851:
Remove ks8851_mll.c") which consolidated the driver into a
common implementation. No file includes this header.
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Link: https://patch.msgid.link/20260515184531.1515418-1-costa.shul@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter/IPVS fixes for net:
1) Fix small race windows in nf_ct_helper_log() when accessing helper,
from Florian Westphal.
2) Fix potential infinite loop and race conditions in IPVS caused by
frequent user-triggered service table changes, from Julia Anastasov.
3) Fix a race condition when dumping ipsets for restore,
from Jozsef Kadlecsik.
4) Fix inner transport offset in IPv6 in nft_inner when extension
headers come before the layer 4 transport header, from Yizhou Zhao.
5) Fix incorrect iteration over IPv4 ranges in several hash set types,
from Nan Li.
6) Fix incorrect order when restoring BH in nft_inner_restore_tun_ctx(),
from Florian Westphal.
7) Validate option array from ip6t_hbh checkpath() to fix an off-by-one
access, from Zhengchuan Liang.
8) Fix race condition between ipset list -terse and concurrent updates,
from Jozsef Kadlecisk.
9) Fix race condition when inserting elements into a hash bucket, also
from Jozsef.
10) Annotate access to first free slot in hashtable, from Jozsef Kadlecsik.
11) Ensure sufficient headroom in br_netfilter neigh transmission,
from Lorenzo Bianconi.
12) Hold reference on skb->dev in nfqueue exit path, bridge local input
is speciall since skb->dev != state->indev, allowing for net_device
to go away while packet is sitting in nfqueue. From Haoze Xie.
* tag 'nf-26-05-16' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_queue: hold bridge skb->dev while queued
netfilter: br_netfilter: Reallocate headroom if necessary in neigh_hh_bridge()
netfilter: ipset: annotate "pos" for concurrent readers/writers
netfilter: ipset: Fix data race between add and dump in all hash types
netfilter: ipset: Fix data race between add and list header in all hash types
netfilter: ip6t_hbh: reject oversized option lists
netfilter: nft_inner: release local_lock before re-enabling softirqs
netfilter: ipset: stop hash:* range iteration at end
netfilter: nft_inner: Fix IPv6 inner_thoff desync
netfilter: ipset: fix a potential dump-destroy race
ipvs: avoid possible loop in ip_vs_dst_event on resizing
netfilter: nf_conntrack_helper: fix possible null deref during error log
====================
Link: https://patch.msgid.link/20260516115627.967773-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- af_bluetooth: serialize accept_q access
- L2CAP: ecred_reconfigure: send packed pdu, not stack pointer
- btmtk: accept too short WMT FUNC_CTRL events
- hci_qca: Convert timeout from jiffies to ms
* tag 'for-net-2026-05-14' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_qca: Convert timeout from jiffies to ms
Bluetooth: L2CAP: ecred_reconfigure: send packed pdu, not stack pointer
Bluetooth: btmtk: accept too short WMT FUNC_CTRL events
Bluetooth: serialize accept_q access
====================
Link: https://patch.msgid.link/20260514172340.1515042-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a debugfs file exposing per-node DMA pool usage for mlx5_frag_buf
allocations.
# cat /sys/kernel/debug/mlx5/<dev>/frag_buf_dma_pools
node block_size used_blocks allocated_blocks
0 4096 0 0
0 8192 0 0
0 16384 0 0
0 32768 0 0
0 65536 0 0
1 4096 0 0
1 8192 0 0
1 16384 0 0
1 32768 0 0
1 65536 0 0
Signed-off-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260514104925.337570-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce generic helper functions to parse Root Port device tree nodes and
extract common properties like reset GPIOs. This allows multiple PCI host
controller drivers to share the same parsing logic.
Define struct pci_host_port to hold common Root Port properties (currently
only list of PERST# GPIO descriptors) and add pci_host_common_parse_ports()
to parse Root Port nodes from device tree.
Also add the 'ports' list to struct pci_host_bridge to better maintain
parsed Root Port information.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260422093549.407022-3-sherry.sun@nxp.com
|
|
There is a race condition that, after a task is enqueued
on a runqueue, task_llc(p) may change due to CPU hotplug,
because the llc_id is dynamically allocated and adjusted
at runtime.
Therefore, checking task_llc(p) to determine whether the
task is being dequeued from its preferred LLC is unreliable
and can cause inconsistent values.
To fix this problem, record whether p is enqueued on its
preferred LLC, in order to pair with account_llc_dequeue()
to maintain a consistent nr_pref_llc_running per runqueue.
This bug was reported by sashiko, and the solution was once
suggested by Prateek.
Fixes: 46afe3af7ead ("sched/cache: Track LLC-preferred tasks per runqueue")
Suggested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Co-developed-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/0c8c6a1571d66792a4d2ff0103ba3cc13e059046.1778703694.git.tim.c.chen@linux.intel.com
|
|
Prateek and Tingyin reported that memory-intensive workloads (such as
stream) can saturate memory bandwidth and caches on the preferred LLC
when sched_cache aggregates too many threads.
To mitigate this, estimate a process's memory footprint by comparing
its NUMA balancing fault statistics to the size of the LLC. If the
footprint exceeds the LLC size, skip cache-aware scheduling.
Note that footprint is only an approximation of the memory footprint,
since the kernel lacks suitable metrics to estimate the real working
set. If a user-provided hint is available in the future, it would be
more accurate. A later patch will allow users to provide a hint to
adjust this threshold.
Suggested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Suggested-by: Vern Hao <vernhao@tencent.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Co-developed-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Tingyin Duan <tingyin.duan@gmail.com>
Link: https://patch.msgid.link/95cf64a385bcc12f18dcebe9d59e8d3ba8bb318f.1778703694.git.tim.c.chen@linux.intel.com
|
|
Cache aware scheduling needs to know the LLC size that a process
can use, so as to avoid memory-intensive tasks from being
over-aggregated on a single LLC.
Introduce a preparation patch to add get_effective_llc_bytes() to
get the LLC size that a CPU can use. The function can be further
enhanced by subtracting the LLC cache ways reserved by resctrl
(CAT in Intel RDT, etc).
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Co-developed-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Tingyin Duan <tingyin.duan@gmail.com>
Link: https://patch.msgid.link/37afee09ff608034da0ce149e72d33b6f4698edf.1778703694.git.tim.c.chen@linux.intel.com
|
|
counts
A performance regression was observed by Prateek when running hackbench
with many threads per process (high fd count). To avoid this, processes
with a large number of active threads are excluded from cache-aware
scheduling.
With sched_cache enabled, record the number of active threads in each
process during the periodic task_cache_work(). While iterating over
CPUs, if the currently running task belongs to the same process as the
task that launched task_cache_work(), increment the active thread count.
If the number of active threads within the process exceeds the number
of Cores (divided by the SMT number) in the LLC, do not enable
cache-aware scheduling. However, on systems with a smaller number of
CPUs within 1 LLC, like Power10/Power11 with SMT4 and an LLC size of 4,
this check effectively disables cache-aware scheduling for any process.
One possible solution suggested by Peter is to use an LLC-mask instead
of a single LLC value for preference. Once there are a 'few' LLCs as
preference, this constraint becomes a little easier. It could be an
enhancement in the future.
For users who wish to perform task aggregation regardless, a debugfs knob
is provided for tuning in a subsequent change.
Suggested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Suggested-by: Aaron Lu <ziqianlu@bytedance.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Co-developed-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Tingyin Duan <tingyin.duan@gmail.com>
Link: https://patch.msgid.link/d076cd21a8e6c6341d1e2d927e118db770ebb650.1778703694.git.tim.c.chen@linux.intel.com
|
|
Scanning online CPUs to calculate the occupancy might be
time-consuming. Only allow 1 thread of the process to scan
the CPUs at the same time, which is similar to what
NUMA balance does in task_numa_work().
Signed-off-by: Jianyong Wu <wujianyong@hygon.cn>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/5672b52e588b855b01e5a1a17822f7c6c7237a3d.1778703694.git.tim.c.chen@linux.intel.com
|
|
css_rstat_updated() is exposed as a BPF kfunc and accepts a
caller-provided cpu argument. The function uses cpu for per-cpu rstat
lookups without checking whether it refers to a valid possible CPU.
A BPF iter/cgroup program with CAP_BPF and CAP_PERFMON can pass an
invalid cpu value. On an unfixed UBSCAN_BOUNDS test kernel, cpu ==
0x7fffffff triggers:
UBSAN: array-index-out-of-bounds in kernel/cgroup/rstat.c:31:9
index 2147483647 is out of range for type 'long unsigned int [64]'
Call Trace:
css_rstat_updated
bpf_iter_run_prog
cgroup_iter_seq_show
bpf_seq_read
Add cpu validation to the BPF-facing css_rstat_updated() kfunc and
move the common implementation to __css_rstat_updated() for in-kernel
callers.
Fixes: a319185be9f5 ("cgroup: bpf: enable bpf programs to integrate with rstat")
Signed-off-by: Qing Ming <a0yami@mailbox.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
When the mailbox controller failed transmitting message, the error code
was only passed to the client's tx done handler and not to
mbox_send_message() in blocking mode. For this reason, the function could
return a false success. This commit resolves the issue by introducing the
tx status and checking it before mbox_send_message() returns.
This commit works with the premise that the multi-threads' access to a
channel in blocking mode is serialized by clients, not by the mailbox
APIs, since the current mbox_send_message() in blocking mode does not
support multi-threads.
Signed-off-by: Joonwon Kang <joonwonkang@google.com>
Reviewed-by: Sudeep Holla <sudeep.holla@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Herve Codina <herve.codina@bootlin.com> says:
On some embedded system boards, audio amplifiers are designed using
discrete components such as op-amp, several resistors and switches to
either adjust the gain (switching resistors) or fully switch the
audio signal path (mute and/or bypass features).
Those switches are usually driven by simple GPIOs.
This kind of amplifiers are not handled in ASoC and the fallback is to
let the user-space handle those GPIOs out of the ALSA world.
In order to have those kind of amplifiers fully integrated in the audio
stack, this series introduces the audio-gpio-amp to handle them.
This new ASoC component allows to have the amplifiers seen as ASoC
auxiliarty devices and so it allows to control them through audio mixer
controls.
In order to ease the review, I choose to split modifications related
to the merge of the gpio-audio-amp part into the simple-amplfier driver
in several commits.
Link: https://patch.msgid.link/20260513081702.317117-1-herve.codina@bootlin.com
|
|
Signed integers can be read from single value properties using
of_property_read_s32() but nothing exist to read signed integers
from multi-value properties.
Fix this lack adding of_property_read_s32_index().
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260513081702.317117-2-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/chleroy/linux into soc/drivers
FSL SOC Changes for 7.1
Freescale QUICC Engine:
- Add missing cleanup on device removal and switch to irq_domain_create_linear()
in interrupt controller for IO Ports
- Panic on ioremap() failure in qe_reset()
Freescale Management Complex:
- Move fsl-mc over to device MSI infrastructure
- Wait for the MC firmware to complete its boot
Freescale Hypervisor:
- Fix header kernel-doc warnings
* tag 'soc_fsl-7.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/chleroy/linux:
bus: fsl-mc: wait for the MC firmware to complete its boot
soc: fsl: qe: panic on ioremap() failure in qe_reset()
soc: fsl: qe_ports_ic: switch to irq_domain_create_linear()
soc: fsl: qe_ports_ic: Add missing cleanup on device removal
virt: fsl_hypervisor: fix header kernel-doc warnings
platform-msi: Remove stale comment
fsl-mc: Remove legacy MSI implementation
fsl-mc: Switch over to per-device platform MSI
irqchip/gic-v3-its: Add fsl_mc device plumbing to the msi-parent handling
fsl-mc: Add minimal infrastructure to use platform MSI
fsl-mc: Remove MSI domain propagation to sub-devices
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"This contains a fixes for the current development cycle. Note that AI
related review sometimes delays fixes a bit because we find more fixes
for the fixes. I might try and send smaller but more fixes PRs if this
trend keeps up.
- Fix various netfslib bugs
- Fix an out-of-bounds write when listing idmappings
- Fix the return values in jfs_mkdir() and orangefs_mkdir()
- Fix a writeback writeback array overflow in fuse
- Fix a forced iversion increment on lazytime timestamp updates
- Reject a negative timeval component in kern_select()
- Fix error return when vfs_mkdir() fails in the cachefiles code
- Fix wrong error code returned for pidns ioctls"
* tag 'vfs-7.1-rc5.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (31 commits)
cachefiles: Fix error return when vfs_mkdir() fails
afs: Fix the locking used by afs_get_link()
netfs, afs: Fix write skipping in dir/link writepages
netfs: Fix netfs_read_folio() to wait on writeback
netfs: Fix folio->private handling in netfs_perform_write()
netfs: Fix partial invalidation of streaming-write folio
netfs: Fix potential UAF in netfs_unlock_abandoned_read_pages()
netfs: Fix leak of request in netfs_write_begin() error handling
netfs: Fix early put of sink folio in netfs_read_gaps()
netfs: Fix write streaming disablement if fd open O_RDWR
netfs: Fix read-gaps to remove netfs_folio from filled folio
netfs: Fix potential deadlock in write-through mode
netfs: Fix streaming write being overwritten
netfs: Defer the emission of trace_netfs_folio()
netfs: Fix netfs_invalidate_folio() to clear dirty bit if all changes gone
netfs: Fix overrun check in netfs_extract_user_iter()
netfs: fix error handling in netfs_extract_user_iter()
netfs: Fix potential uninitialised var in netfs_extract_user_iter()
netfs: fix VM_BUG_ON_FOLIO() issue in netfs_write_begin() call
netfs: Fix zeropoint update where i_size > remote_i_size
...
|
|
Recently, a few races have been discovered in the GEM LRU logic, all
of them caused by the fact the LRU lock is accessed through
gem->lru->lock, and that very same lock also protects changes to
gem->lru, leading to situations where gem->lru needs to first be
accessed without the lock held, to then get the lru to access the lock
through and finally take the lock and do the expected operation.
Currently, the only driver making use of this API (MSM) declares a
device-wide lock, and the user we're about to add (panthor) will
do the same. There's no evidence that we will ever have a driver
that wants different pools of LRUs protected by different locks under
the same drm_device. So we're better off moving this lock to drm_device
and always locking it through obj->dev->gem_lru_mutex, or directly
through dev->gem_lru_mutex.
If anyone ever needs more fine-grained locking, this can be revisited
to pass some drm_gem_lru_pool object representing the pool of LRUs
under a specific lock, but for now, the per-device lock seems to be
enough.
Fixes: e7c2af13f811 ("drm/gem: Add LRU/shrinker helper")
Reported-by: Chia-I Wu <olvaffe@gmail.com>
Closes: https://gitlab.freedesktop.org/panfrost/linux/-/work_items/86
Reviewed-by: Rob Clark <rob.clark@oss.qualcomm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: https://patch.msgid.link/20260518-panthor-shrinker-fixes-v4-1-1920234470d5@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
As described in commit 2bc057692599 ("block: don't make REQ_POLLED imply
REQ_NOWAIT"), which fixed the same issue for the block device node, there
are valid cases to poll for I/O completion without REQ_NOWAIT.
Additionally, sing REQ_NOWAIT for file system writes is currently not
supported as file systems writes are not idempotent and would need a
retry of just the bio and not the entire operation to be fully supported.
Switch iomap to set REQ_POLLED and remove the now unused bio_set_polled
helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260518062917.506483-1-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This commit moves CPU hotplug callbacks from ETMv4 driver to core layer.
The motivation is the core layer can control all components on an
activated path rather but not only managing tracer in ETMv4 driver.
The perf event layer will disable CoreSight PMU event 'cs_etm' when
hotplug off a CPU. That means a perf mode will be always converted to
disabled mode in CPU hotplug. Arm CoreSight CPU hotplug callbacks only
need to handle the Sysfs mode and ignore the perf mode.
Add a 'mode' argument to coresight_pm_get_active_path() so it only
returns active paths for the relevant mode. Define the enum with bit
flags so it is safe for bitwise operations.
Change CPUHP_AP_ARM_CORESIGHT_STARTING to CPUHP_AP_ARM_CORESIGHT_ONLINE
so that the CPU hotplug callback runs in the online state and thread
context, allowing coresight_disable_sysfs() to be called directly to
disable the path.
Tested-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-27-f88c4a3ecfe9@arm.com
|
|
Except for software sources (e.g. STM), other sources treat multiple
enables as equivalent to a single enable. The device mode already
tracks the binary state, so it is redundant to operate refcount.
Introduce a helper coresight_is_software_source() for check software
source. Refactor to maintain the refcount only for software sources.
This simplifies future CPU PM handling without refcount logic.
Tested-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-26-f88c4a3ecfe9@arm.com
|
|
The ACS specification does not allow a non-NCQ command to be issued while
an NCQ command is outstanding.
Commit 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ command starvation")
introduced a feature where a deferred non-NCQ command gets issued from a
workqueue. The design stores a single non-NCQ command per port.
However, when using Port Multipliers (PMPs), specifically PMPs that
support FIS-Based Switching (FBS), non-NCQ and NCQ commands can be mixed
on the same port, just not for the same link, see e.g. ata_std_qc_defer()
which is, and always has operated on a per-link basis.
Therefore, move the deferred_qc from struct ata_port to struct ata_link.
This way, when using a PMP with FBS, we will not needlessly defer commands
to all other links, just because one link issued a non-NCQ command while
having an NCQ command outstanding. Only commands for that specific link
will be deferred. This is in line with how PMPs with FBS worked before
commit 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ command starvation").
Fixes: 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ command starvation")
Tested-by: Tommy Kelly <linux@tkel.ly>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
When using Port Multipliers (PMPs) with Command-Based Switching (CBS), you
can only issue commands to one link at a time. For PMPs with CBS, there is
already code to handle commands being sent to different links in
sata_pmp_qc_defer_cmd_switch() using ap->excl_link. sata_sil24 also makes
use of ap->excl_link.
A user on the list reported that commit 0ea84089dbf6 ("ata: libata-scsi:
avoid Non-NCQ command starvation") broke PMPs with CBS. The commit
introduced code that stores a deferred qc in ap->deferred_qc, to later be
issued via a workqueue. It turns out that this change is incompatible with
the existing ap->excl_link handling used by PMPs with CBS.
Thus, modify sata_pmp_qc_defer_cmd_switch() and sil24_qc_defer() to return
ATA_DEFER_LINK_EXCL, and make sure that the deferred QC handling via
workqueue is not used for this return value.
This way, PMPs with CBS will work once again. Note that the starvation
referenced in commit 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ
command starvation") can only happen on libsas ports, and libsas does not
support Port Multipliers, thus there is no harm of reverting back to the
previous way of deferring commands for PMPs with CBS.
Non-libsas ports connected to anything but a PMP with CBS (e.g. a normal
drive or a PMP with FBS) will continue using the deferred workqueue, since
it does result in lower completion latencies for non-NCQ commands, even
though the workqueue is not strictly needed to avoid starvation for
non-libsas ports.
If we want to modify the scope of the workqueue issuing to also handle
PMPs with CBS, then we should ensure that we can save both NCQ and non-NCQ
commands in ap->deferred_qc, while also removing the existing PMP CBS
handling using ap->excl_link, such that we don't duplicate features.
While at it, also add a comment explaining how the ap->excl_link mechanism
works.
Fixes: 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ command starvation")
Tested-by: Tommy Kelly <linux@tkel.ly>
Reported-by: Tommy Kelly <linux@tkel.ly>
Closes: https://lore.kernel.org/linux-ide/ce09cc21-a8e9-4845-b205-35411e22fba9@tkel.ly/
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
Johan Hovold <johan@kernel.org> says:
In preparation for fixing the SPI controller API so that it no longer
drops a reference when deregistering (non-managed) controllers (cf.
[1]), this series converts drivers using managed registration to also
use managed allocation.
Included is also a related cleanup of a lp8841-rtc.
This leaves us with 18 drivers using non-managed allocation, which is
few enough to be able to fix the API in tree-wide change.
Johan
[1] https://lore.kernel.org/lkml/20260325145319.1132072-1-johan@kernel.org/
Link: https://patch.msgid.link/20260511150408.796155-1-johan@kernel.org
|
|
This commit only set the path pointer for system tracers (e.g. STM) in
coresight_{enable|disable}_source().
Later changes will set the path pointer locally for per-CPU sources.
This is because the mode and path pointer must be set together, so that
they are observed atomically by the CPU PM notifier.
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-19-f88c4a3ecfe9@arm.com
|
|
The current implementation only saves and restores the context for ETM
sources while ignoring the context of links. However, if funnels or
replicators on a linked path resides in a CPU or cluster power domain,
the hardware context for the link will be lost after resuming from low
power states.
To support context management for links during CPU low power modes, a
better way is to implement CPU PM callbacks in the Arm CoreSight core
layer. As the core layer has sufficient information for linked paths,
from tracers to links, which can be used for power management.
As a first step, this patch registers CPU PM notifier in the core layer.
If a source device provides callbacks for saving and restoring context,
these callbacks will be invoked in CPU suspend and resume.
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-11-f88c4a3ecfe9@arm.com
|
|
The CPU ID can be fetched directly from the coresight_device structure,
so the .cpu_id() callback is no longer needed.
Remove the .cpu_id() callback from source ops and update callers
accordingly.
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-5-f88c4a3ecfe9@arm.com
|
|
Add a new flag CORESIGHT_DESC_CPU_BOUND to indicate components that
are CPU bound. Populate CPU ID into the coresight_device structure;
otherwise, set CPU ID to -1 for non CPU bound devices.
Use the {0} initializer to clear coresight_desc structures to avoid
uninitialized values.
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-4-f88c4a3ecfe9@arm.com
|
|
DIO-II support was added in 2004, update a comment to reflect this.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patch.msgid.link/5aa3901baaa5d145804e1a836dd8ee3fb07ea144.1777897387.git.geert@linux-m68k.org
|
|
Extend the existing Tegra186 GPIO controller device tree bindings with
support for the GPIO controllers found on Tegra238. Tegra238 has two
GPIO controllers: the main controller and always-on (AON) controller.
The number of pins is slightly different, but the programming model
remains the same.
Add a new header, include/dt-bindings/gpio/nvidia,tegra238-gpio.h,
that defines port IDs as well as the TEGRA238_MAIN_GPIO() helper,
both of which are used in conjunction to create a unique specifier
for each pin.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260514124835.108532-1-pshete@nvidia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Introduce device-managed helpers for clocksource registration.
The clocksource framework currently provides __clocksource_register_scale()
along with convenience wrappers for Hz and kHz registration. However,
drivers must handle error paths and cleanup manually, typically by pairing
registration with an explicit clocksource_unregister() call.
Add a devm-based variant, __devm_clocksource_register_scale(), along with
devm_clocksource_register_hz() and devm_clocksource_register_khz() helpers.
These helpers register the clocksource and attach a devres action to
automatically unregister it on driver detach or probe failure.
This simplifies driver code by:
* removing explicit cleanup paths
* ensuring correct teardown ordering
* aligning with the devm-based resource management model widely used
across the kernel
While drivers can open-code devm_add_action_or_reset(), providing a
dedicated helper avoids duplication, reduces boilerplate, and ensures
consistent usage across drivers, following patterns used in other
subsystems.
This is also particularly useful for drivers built as modules, where
device-managed resource handling avoids manual cleanup in remove paths and
ensures correct teardown on module unload.
This helper is self-contained and can be adopted progressively by drivers.
No functional change.
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260506153831.605159-1-daniel.lezcano@oss.qualcomm.com
|
|
When a main program with exception_boundary has outgoing stack
arguments (e.g. from calling subprogs with >5 args), bpf_throw() fails
to correctly restore callee-saved registers, causing a kernel crash.
The x86 JIT allocates the outgoing stack arg area below the
callee-saved registers via 'sub rsp, outgoing_rsp' in the prologue.
When bpf_throw() unwinds, it captures the main program's sp (which
includes this outgoing area) and passes it to the exception callback.
The callback gets rsp and rbp, followed by pop_callee_regs, but rsp
points into the outgoing arg area rather than the callee-saved
registers, so the pops restore garbage values. Returning to the
kernel with corrupted callee-saved registers causes a crash.
Fix this by adjusting the sp (adding stack_arg_sp_adjust) passed to
the exception callback, so it points to the bottom of the callee-saved
registers instead of the outgoing arg area. When stack_arg_sp_adjust
is 0 (the common case), this is a no-op.
Fixes: 324c3ca6eed6 ("bpf,x86: Implement JIT support for stack arguments")
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260517150702.288031-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Global subprogs are verified independently and are not descended into
when their callers are symbolically executed. This means a caller can
hold references or locks across a global subprog call that may throw,
while the verifier only checks the non-exceptional return path at the
call site.
Record whether a subprog might throw in the CFG summary pass, alongside
the existing might_sleep and packet-data-changing summaries, and
propagate that effect through reachable callees.
When a global subprog is marked as possibly throwing, push the normal
continuation and validate the exceptional path immediately at the call
site, avoiding a synthetic exception state and associated special case
in the pruning checks.
Fixes: f18b03fabaa9 ("bpf: Implement BPF exceptions")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260517075530.3461166-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Ingo Molnar:
- Fix ARM64-specific rseq regressions (Mark Rutland)
* tag 'sched-urgent-2026-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
arm64/entry: Fix arm64-specific rseq brokenness
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull IRQ fixes from Ingo Molnar:
- Fix use-after-free in irq_work_single() on PREEMPT_RT (Jiayuan Chen)
- Don't call add_interrupt_randomness() for NMIs in
handle_percpu_devid_irq() (Mark Rutland)
- Remove unused function in the ath79-cpu irqchip driver causing LKP
CI build warnings (Rosen Penev)
- Fix IRQ allocation/teardown leakage regressions in the GICv5 irqchip
driver (Sascha Bischoff)
- Fix an IRQ trigger type regression in the Meson S4 SoC irqchip driver
(Xianwei Zhao)
- Fix CPU offlining regression in the RiscV IMSIC irqchip driver
(Yong-Xuan Wang)
* tag 'irq-urgent-2026-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irq_work: Fix use-after-free in irq_work_single() on PREEMPT_RT
irqchip/riscv-imsic: Clear interrupt move state during CPU offlining
irqchip/meson-gpio: Use the correct register in meson_s4_gpio_irq_set_type()
irqchip/ath79-cpu: Remove unused function
genirq/chip: Don't call add_interrupt_randomness() for NMIs
irqchip/gic-v5: Allocate ITS parent LPIs as a range
irqchip/gic-v5: Support range allocation for LPIs
irqchip/gic-v5: Move LPI allocation into the LPI domain
|
|
Pass a parent device into ffa_device_register() and use the synthetic
arm-ffa platform device as the parent for each registered FF-A device.
This keeps the enumerated FF-A partition devices anchored below the FF-A
core device in the driver model, matching the platform-driver conversion
of the core transport.
Suggested-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Link: https://patch.msgid.link/20260508-b4-ffa_plat_dev-v1-3-c5a30f8cf7b8@kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
|
|
This was causing a build break when CONFIG_FILE_LOCKING was disabled.
Move the LEASE_BREAK_* flags into the non-#ifdef'ed part of the file.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202605161232.1lY6pZoM-lkp@intel.com/
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260516-dir-deleg-fix-v1-1-1b68f0aa990a@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
br_pass_frame_up() rewrites skb->dev from the ingress port to the bridge
master before queueing bridge LOCAL_IN packets. NFQUEUE only holds
references on state.in/out and bridge physdevs, so a queued bridge
packet can retain a freed bridge master in skb->dev until reinjection.
When the verdict is reinjected later, br_netif_receive_skb() re-enters
the receive path with skb->dev still pointing at the freed bridge master,
triggering a use-after-free.
Store skb->dev in the queue entry, hold a reference on it for the queue
lifetime, and use the saved device when dropping queued packets during
NETDEV_DOWN handling.
Fixes: ac2863445686 ("netfilter: bridge: add nf_afinfo to enable queuing to userspace")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Haoze Xie <royenheart@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
neigh_hh_bridge() assumes the skb always has sufficient headroom to copy
the aligned L2 header. This assumption can trigger the crash reported
below using the following netfilter setup:
$modprobe br_netfilter
$sysctl -w net.bridge.bridge-nf-call-iptables=1
$root@OpenWrt:~# nft list ruleset
table ip nat {
chain prerouting {
type nat hook prerouting priority dstnat; policy accept;
ip daddr 192.168.83.123 dnat to 192.168.83.120
}
}
- iperf3 client (192.168.83.119) --> bridge (192.168.83.118) --> iperf3 server (192.168.83.120)
the iperf3 client is sending packet for 192.168.83.123 to the bridge device.
[ 1579.036575] Unable to handle kernel write to read-only memory at virtual address ffffff8004d76ffe
[ 1579.045482] Mem abort info:
[ 1579.048273] ESR = 0x000000009600004f
[ 1579.052024] EC = 0x25: DABT (current EL), IL = 32 bits
[ 1579.057363] SET = 0, FnV = 0
[ 1579.060417] EA = 0, S1PTW = 0
[ 1579.063550] FSC = 0x0f: level 3 permission fault
[ 1579.068345] Data abort info:
[ 1579.071224] ISV = 0, ISS = 0x0000004f, ISS2 = 0x00000000
[ 1579.076720] CM = 0, WnR = 1, TnD = 0, TagAccess = 0
[ 1579.081770] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 1579.087092] swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000080dc4000
[ 1579.093794] [ffffff8004d76ffe] pgd=180000009ffff003, p4d=180000009ffff003, pud=180000009ffff003, pmd=180000009ffe3003, pte=0060000084d76787
[ 1579.106343] Internal error: Oops: 000000009600004f [#1] SMP
[ 1579.193824] CPU: 0 UID: 0 PID: 235 Comm: napi/qdma_eth-3 Tainted: G O 6.12.57 #0
[ 1579.202614] Tainted: [O]=OOT_MODULE
[ 1579.206102] Hardware name: Airoha AN7581 Evaluation Board (DT)
[ 1579.211929] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 1579.218889] pc : br_nf_pre_routing_finish_bridge+0x1ac/0xcc8 [br_netfilter]
[ 1579.225859] lr : br_nf_pre_routing_finish_bridge+0x18c/0xcc8 [br_netfilter]
[ 1579.232822] sp : ffffffc0817cba20
[ 1579.236128] x29: ffffffc0817cba20 x28: 0000000000000000 x27: ffffff8002b89000
[ 1579.243273] x26: ffffff8004d7700e x25: 0000000000000008 x24: 0000000000000000
[ 1579.250416] x23: ffffffc08179d4c0 x22: 0000000000000000 x21: ffffffc08179d4c0
[ 1579.257561] x20: ffffff8004d9b800 x19: ffffff8015010000 x18: 0000000000000014
[ 1579.264704] x17: ffffffbf9e930000 x16: ffffffc0817c8000 x15: 0000000000000070
[ 1579.271848] x14: 0000000000000080 x13: 0000000000000001 x12: 0000000000000000
[ 1579.278993] x11: ffffffc0798caae0 x10: ffffff8014db6fd8 x9 : 0000000000000000
[ 1579.286136] x8 : 0000000000000003 x7 : ffffffc08171f628 x6 : 000000001a3b83d3
[ 1579.293281] x5 : 0000000000000000 x4 : 1beb76f22fee0000 x3 : ffffff8004d7700e
[ 1579.300425] x2 : 0000000000000000 x1 : ffffff8004d9b8bc x0 : ffffff80026ed000
[ 1579.307570] Call trace:
[ 1579.310018] br_nf_pre_routing_finish_bridge+0x1ac/0xcc8 [br_netfilter]
[ 1579.316632] br_nf_hook_thresh+0xd4/0x14bc [br_netfilter]
[ 1579.322032] br_nf_hook_thresh+0x250/0x14bc [br_netfilter]
[ 1579.327517] br_nf_hook_thresh+0x76c/0x14bc [br_netfilter]
[ 1579.333003] br_handle_frame+0x180/0x480
[ 1579.336935] __netif_receive_skb_core.constprop.0+0x540/0xf40
[ 1579.342682] __netif_receive_skb_one_core+0x28/0x50
[ 1579.347561] process_backlog+0x98/0x1e0
[ 1579.351398] __napi_poll+0x34/0x1c4
[ 1579.354887] net_rx_action+0x178/0x330
[ 1579.358638] handle_softirqs+0x108/0x2d4
[ 1579.362560] __do_softirq+0x10/0x18
[ 1579.366051] ____do_softirq+0xc/0x20
[ 1579.369627] call_on_irq_stack+0x30/0x4c
[ 1579.373550] do_softirq_own_stack+0x18/0x20
[ 1579.377734] do_softirq+0x4c/0x60
[ 1579.381050] __local_bh_enable_ip+0x88/0x98
[ 1579.385234] napi_threaded_poll_loop+0x188/0x21c
[ 1579.389853] napi_threaded_poll+0x70/0x80
[ 1579.393863] kthread+0xd8/0xdc
[ 1579.396918] ret_from_fork+0x10/0x20
[ 1579.400499] Code: 88dffc22 3707ffc2 f9406663 f9406684 (f81f0064)
[ 1579.406589] ---[ end trace 0000000000000000 ]---
[ 1579.411209] Kernel panic - not syncing: Oops: Fatal exception in interrupt
[ 1579.418083] SMP: stopping secondary CPUs
[ 1579.422012] Kernel Offset: disabled
Fix the issue reallocating the skb headroom if necessary in neigh_hh_bridge routine.
Fixes: e179e6322ac33 ("netfilter: bridge-netfilter: Fix MAC header handling with IP DNAT")
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Sashiko points out that unprivileged user can frequently
call ip_vs_flush() or ip_vs_del_service() to trigger
svc_table_changes updates that can lead to infinite loop
in ip_vs_dst_event(). This can also happen if the user
triggers frequent table resizing without deleting all
services. We should also consider the possible effects
if the user triggers many NETDEV_DOWN events.
One way to solve it is to hold svc_resize_sem in
ip_vs_dst_event() but this can block the dev notifier
during the whole resizing process.
Instead, use new rw_semaphore svc_replace_sem to protect just
the svc_table replacement which is a short code section.
Then hold svc_replace_sem in ip_vs_dst_event() to serialize
with replacing the svc_table. As result, loop is avoided
as there is no need to repeat the table walking from the
start. By this way changes in svc_table_changes can happen
only when all services are removed and all dev references
dropped which allows us to abort the table walking.
As IP_VS_WORK_SVC_NORESIZE is the flag used to stop the
svc_resize_work under service_mutex, we should check only
this flag often but not while under service_mutex.
To remove the mutex_trylock() for service_mutex in the
second phase where the resizer installs the new table
after rehashing, we will avoid holding the service_mutex
there. As result, the code in configuration context which
is under service_mutex should access ipvs->svc_table under
RCU because it can be replaced at anytime and released
after a RCU grace period. As for ip_vs_zero_all(), it needs
different solution as a table walker which can escape
single RCU read-side critical section: to hold the
svc_replace_sem to prevent table to be replaced.
In ip_vs_status_show() prefer to hold svc_replace_sem
to avoid many loops, just detect if the svc_table is
removed.
Prefer the newly attached table for the u_thresh/l_thresh
checks to know when to grow/shrink while adding or deleting
services because the new table size is based on the latest
parameters.
Link: https://sashiko.dev/#/patchset/20260505001648.360569-1-pablo%40netfilter.org
Fixes: 840aac3d900d ("ipvs: use resizable hash table for services")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
