summaryrefslogtreecommitdiff
path: root/tools/testing
AgeCommit message (Collapse)Author
2021-09-22selftests: KVM: Fix check for !POLLIN in demand_paging_testOliver Upton
The logical not operator applies only to the left hand side of a bitwise operator. As such, the check for POLLIN not being set in revents wrong. Fix it by adding parentheses around the bitwise expression. Fixes: 4f72180eb4da ("KVM: selftests: Add demand paging content to the demand paging test") Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Oliver Upton <oupton@google.com> Message-Id: <20210921171121.2148982-2-oupton@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-22KVM: selftests: Add a test for KVM_RUN+rseq to detect task migration bugsSean Christopherson
Add a test to verify an rseq's CPU ID is updated correctly if the task is migrated while the kernel is handling KVM_RUN. This is a regression test for a bug introduced by commit 72c3c0fe54a3 ("x86/kvm: Use generic xfer to guest work function"), where TIF_NOTIFY_RESUME would be cleared by KVM without updating rseq, leading to a stale CPU ID and other badness. Signed-off-by: Sean Christopherson <seanjc@google.com> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Message-Id: <20210901203030.1292304-5-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-21seltests: bpf: test_tunnel: Use ip neighJiri Benc
The 'arp' command is deprecated and is another dependency of the selftest. Just use 'ip neigh', the test depends on iproute2 already. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/40f24b9d3f0f53b5c44471b452f9a11f4d13b7af.1632236133.git.jbenc@redhat.com
2021-09-21selftests/bpf: Adopt attach_probe selftest to work on old kernelsAndrii Nakryiko
Make sure to not use ref_ctr_off feature when running on old kernels that don't support this feature. This allows to test libbpf's legacy kprobe and uprobe logic on old kernels. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210921210036.1545557-3-andrii@kernel.org
2021-09-21tools/testing/cxl: Introduce a mock memory device + driverDan Williams
Introduce an emulated device-set plus driver to register CXL memory devices, 'struct cxl_memdev' instances, in the mock cxl_test topology. This enables the development of HDM Decoder (Host-managed Device Memory Decoder) programming flow (region provisioning) in an environment that can be updated alongside the kernel as it gains more functionality. Whereas the cxl_pci module looks for CXL memory expanders on the 'pci' bus, the cxl_mock_mem module attaches to CXL expanders on the platform bus emitted by cxl_test. Acked-by: Ben Widawsky <ben.widawsky@intel.com> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/163116440099.2460985.10692549614409346604.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-09-21tools/testing/cxl: Introduce a mocked-up CXL port hierarchyDan Williams
Create an environment for CXL plumbing unit tests. Especially when it comes to an algorithm for HDM Decoder (Host-managed Device Memory Decoder) programming, the availability of an in-kernel-tree emulation environment for CXL configuration complexity and corner cases speeds development and deters regressions. The approach taken mirrors what was done for tools/testing/nvdimm/. I.e. an external module, cxl_test.ko built out of the tools/testing/cxl/ directory, provides mock implementations of kernel APIs and kernel objects to simulate a real world device hierarchy. One feedback for the tools/testing/nvdimm/ proposal was "why not do this in QEMU?". In fact, the CXL development community has developed a QEMU model for CXL [1]. However, there are a few blocking issues that keep QEMU from being a tight fit for topology + provisioning unit tests: 1/ The QEMU community has yet to show interest in merging any of this support that has had patches on the list since November 2020. So, testing CXL to date involves building custom QEMU with out-of-tree patches. 2/ CXL mechanisms like cross-host-bridge interleave do not have a clear path to be emulated by QEMU without major infrastructure work. This is easier to achieve with the alloc_mock_res() approach taken in this patch to shortcut-define emulated system physical address ranges with interleave behavior. The QEMU enabling has been critical to get the driver off the ground, and may still move forward, but it does not address the ongoing needs of a regression testing environment and test driven development. This patch adds an ACPI CXL Platform definition with emulated CXL multi-ported host-bridges. A follow on patch adds emulated memory expander devices. Acked-by: Ben Widawsky <ben.widawsky@intel.com> Reported-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/20210202005948.241655-1-ben.widawsky@intel.com [1] Link: https://lore.kernel.org/r/163164680798.2831381.838684634806668012.stgit@dwillia2-desk3.amr.corp.intel.com Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-09-21kselftest/arm64: signal: Skip tests if required features are missingCristian Marussi
During initialization of a signal testcase, features declared as required are properly checked against the running system but no action is then taken to effectively skip such a testcase. Fix core signals test logic to abort initialization and report such a testcase as skipped to the KSelfTest framework. Fixes: f96bf4340316 ("kselftest: arm64: mangle_pstate_invalid_compat_toggle and common utils") Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210920121228.35368-1-cristian.marussi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-09-21selftests: netfilter: add zone stress test with colliding tuplesFlorian Westphal
Add 20k entries to the connection tracking table, once from the data plane, once via ctnetlink. In both cases, each entry lives in a different conntrack zone and addresses/ports are identical. Expectation is that insertions work and occurs in constant time: PASS: added 10000 entries in 1215 ms (now 10000 total, loop 1) PASS: added 10000 entries in 1214 ms (now 20000 total, loop 2) PASS: inserted 20000 entries from packet path in 2434 ms total PASS: added 10000 entries in 57631 ms (now 10000 total) PASS: added 10000 entries in 58572 ms (now 20000 total) PASS: inserted 20000 entries via ctnetlink in 116205 ms Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-09-21selftests: netfilter: add selftest for directional zone supportFlorian Westphal
Add a script to exercise NAT port clash resolution with directional zones. Add net namespaces that use the same IP address and connect them to a gateway. Gateway uses policy routing based on iif/mark and conntrack zones to isolate the client namespaces. In server direction, same zone with NAT to single address is used. Then, connect to a server from each client netns, using identical connection id, i.e. saddr:sport -> daddr:dport. Expectation is for all connections to succeeed: NAT gatway is supposed to do port reallocation for each of the (clashing) connections. This is based on the description/use case provided in the commit message of deedb59039f111 ("netfilter: nf_conntrack: add direction support for zones"). Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-09-19Merge tag 'powerpc-5.15-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix crashes when scv (System Call Vectored) is used to make a syscall when a transaction is active, on Power9 or later. - Fix bad interactions between rfscv (Return-from scv) and Power9 fake-suspend mode. - Fix crashes when handling machine checks in LPARs using the Hash MMU. - Partly revert a recent change to our XICS interrupt controller code, which broke the recently added Microwatt support. Thanks to Cédric Le Goater, Eirik Fuller, Ganesh Goudar, Gustavo Romero, Joel Stanley, Nicholas Piggin. * tag 'powerpc-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/xics: Set the IRQ chip data for the ICS native backend powerpc/mce: Fix access error in mce handler KVM: PPC: Book3S HV: Tolerate treclaim. in fake-suspend mode changing registers powerpc/64s: system call rfscv workaround for TM bugs selftests/powerpc: Add scv versions of the basic TM syscall tests powerpc/64s: system call scv tabort fix for corrupt irq soft-mask state
2021-09-19selftests: net: af_unix: Fix makefile to use TEST_GEN_PROGSShuah Khan
Makefile uses TEST_PROGS instead of TEST_GEN_PROGS to define executables. TEST_PROGS is for shell scripts that need to be installed and run by the common lib.mk framework. The common framework doesn't touch TEST_PROGS when it does build and clean. As a result "make kselftest-clean" and "make clean" fail to remove executables. Run and install work because the common framework runs and installs TEST_PROGS. Build works because the Makefile defines "all" rule which is unnecessary if TEST_GEN_PROGS is used. Use TEST_GEN_PROGS so the common framework can handle build/run/ install/clean properly. Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-19selftests: net: af_unix: Fix incorrect args in test result msgShuah Khan
Fix the args to fprintf(). Splitting the message ends up passing incorrect arg for "sigurg %d" and an extra arg overall. The test result message ends up incorrect. test_unix_oob.c: In function ‘main’: test_unix_oob.c:274:43: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘char *’ [-Wformat=] 274 | fprintf(stderr, "Test 3 failed, sigurg %d len %d OOB %c ", | ~^ | | | int | %s 275 | "atmark %d\n", signal_recvd, len, oob, atmark); | ~~~~~~~~~~~~~ | | | char * test_unix_oob.c:274:19: warning: too many arguments for format [-Wformat-extra-args] 274 | fprintf(stderr, "Test 3 failed, sigurg %d len %d OOB %c ", Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-18selftests: mptcp: add mptcp getsockopt test casesFlorian Westphal
Add a test program that retrieves the three info types: 1. mptcp meta information 2. tcp info for subflow 3. subflow endpoint addresses For all three rudimentary checks are added. 1. Meta information checks that the logical mptcp sequence numbers advance as expected, based on the bytes read (init seq + bytes_received/sent) and the connection state (after close, we should exect 1 extra byte due to FIN). 2. TCP info checks the number of bytes sent/received vs. sums of read/write syscall return values. 3. Subflow endpoint addresses are checked vs. getsockname/getpeername result. Tests for forward compatibility (0-initialisation of output-only fields in mptcp_subflow_data structure) are added as well. Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-17selftests/bpf: Add trace_vprintk test progDave Marchevsky
This commit adds a test prog for vprintk which confirms that: * bpf_trace_vprintk is writing to /sys/kernel/debug/tracing/trace_pipe * __bpf_vprintk macro works as expected * >3 args are printed * bpf_printk w/ 0 format args compiles * bpf_trace_vprintk call w/ a fmt specifier but NULL fmt data fails Approach and code are borrowed from trace_printk test. Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210917182911.2426606-9-davemarchevsky@fb.com
2021-09-17selftests/bpf: Migrate prog_tests/trace_printk CHECKs to ASSERTsDave Marchevsky
Guidance for new tests is to use ASSERT macros instead of CHECK. Since trace_vprintk test will borrow heavily from trace_printk's, migrate its CHECKs so it remains obvious that the two are closely related. Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210917182911.2426606-8-davemarchevsky@fb.com
2021-09-17bpftool: Only probe trace_vprintk feature in 'full' modeDave Marchevsky
Since commit 368cb0e7cdb5e ("bpftool: Make probes which emit dmesg warnings optional"), some helpers aren't probed by bpftool unless `full` arg is added to `bpftool feature probe`. bpf_trace_vprintk can emit dmesg warnings when probed, so include it. Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210917182911.2426606-7-davemarchevsky@fb.com
2021-09-17selftests/bpf: Stop using bpf_program__loadDave Marchevsky
bpf_program__load is not supposed to be used directly. Replace it with bpf_object__ APIs for the reference_tracking prog_test, which is the last offender in bpf selftests. Some additional complexity is added for this test, namely the use of one bpf_object to iterate through progs, while a second bpf_object is created and opened/closed to test actual loading of progs. This is because the test was doing bpf_program__load then __unload to test loading of individual progs and same semantics with bpf_object__load/__unload result in failure to load an __unload-ed obj. Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210917182911.2426606-3-davemarchevsky@fb.com
2021-09-17Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski
Alexei Starovoitov says: ==================== pull-request: bpf-next 2021-09-17 We've added 63 non-merge commits during the last 12 day(s) which contain a total of 65 files changed, 2653 insertions(+), 751 deletions(-). The main changes are: 1) Streamline internal BPF program sections handling and bpf_program__set_attach_target() in libbpf, from Andrii. 2) Add support for new btf kind BTF_KIND_TAG, from Yonghong. 3) Introduce bpf_get_branch_snapshot() to capture LBR, from Song. 4) IMUL optimization for x86-64 JIT, from Jie. 5) xsk selftest improvements, from Magnus. 6) Introduce legacy kprobe events support in libbpf, from Rafael. 7) Access hw timestamp through BPF's __sk_buff, from Vadim. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (63 commits) selftests/bpf: Fix a few compiler warnings libbpf: Constify all high-level program attach APIs libbpf: Schedule open_opts.attach_prog_fd deprecation since v0.7 selftests/bpf: Switch fexit_bpf2bpf selftest to set_attach_target() API libbpf: Allow skipping attach_func_name in bpf_program__set_attach_target() libbpf: Deprecated bpf_object_open_opts.relaxed_core_relocs selftests/bpf: Stop using relaxed_core_relocs which has no effect libbpf: Use pre-setup sec_def in libbpf_find_attach_btf_id() bpf: Update bpf_get_smp_processor_id() documentation libbpf: Add sphinx code documentation comments selftests/bpf: Skip btf_tag test if btf_tag attribute not supported docs/bpf: Add documentation for BTF_KIND_TAG selftests/bpf: Add a test with a bpf program with btf_tag attributes selftests/bpf: Test BTF_KIND_TAG for deduplication selftests/bpf: Add BTF_KIND_TAG unit tests selftests/bpf: Change NAME_NTH/IS_NAME_NTH for BTF_KIND_TAG format selftests/bpf: Test libbpf API function btf__add_tag() bpftool: Add support for BTF_KIND_TAG libbpf: Add support for BTF_KIND_TAG libbpf: Rename btf_{hash,equal}_int to btf_{hash,equal}_int_tag ... ==================== Link: https://lore.kernel.org/r/20210917173738.3397064-1-ast@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-17selftests/bpf: Fix a few compiler warningsYonghong Song
With clang building selftests/bpf, I hit a few warnings like below: .../bpf_iter.c:592:48: warning: variable 'expected_key_c' set but not used [-Wunused-but-set-variable] __u32 expected_key_a = 0, expected_key_b = 0, expected_key_c = 0; ^ .../bpf_iter.c:688:48: warning: variable 'expected_key_c' set but not used [-Wunused-but-set-variable] __u32 expected_key_a = 0, expected_key_b = 0, expected_key_c = 0; ^ .../tc_redirect.c:657:6: warning: variable 'target_fd' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] if (!ASSERT_OK_PTR(nstoken, "setns " NS_FWD)) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .../tc_redirect.c:743:6: note: uninitialized use occurs here if (target_fd >= 0) ^~~~~~~~~ Removing unused variables and initializing the previously-uninitialized variable to ensure these warnings are gone. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210917043343.3711917-1-yhs@fb.com
2021-09-17selftests/bpf: Switch fexit_bpf2bpf selftest to set_attach_target() APIAndrii Nakryiko
Switch fexit_bpf2bpf selftest to bpf_program__set_attach_target() instead of using bpf_object_open_opts.attach_prog_fd, which is going to be deprecated. These changes also demonstrate the new mode of set_attach_target() in which it allows NULL when the target is BPF program (attach_prog_fd != 0). Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20210916015836.1248906-6-andrii@kernel.org
2021-09-17selftests/bpf: Stop using relaxed_core_relocs which has no effectAndrii Nakryiko
relaxed_core_relocs option hasn't had any effect for a while now, stop specifying it. Next patch marks it as deprecated. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20210916015836.1248906-3-andrii@kernel.org
2021-09-17net: update NXP copyright textVladimir Oltean
NXP Legal insists that the following are not fine: - Saying "NXP Semiconductors" instead of "NXP", since the company's registered name is "NXP" - Putting a "(c)" sign in the copyright string - Putting a comma in the copyright string The only accepted copyright string format is "Copyright <year-range> NXP". This patch changes the copyright headers in the networking files that were sent by me, or derived from code sent by me. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts! Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-16Merge tag 'net-5.15-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf. Current release - regressions: - vhost_net: fix OoB on sendmsg() failure - mlx5: bridge, fix uninitialized variable usage - bnxt_en: fix error recovery regression Current release - new code bugs: - bpf, mm: fix lockdep warning triggered by stack_map_get_build_id_offset() Previous releases - regressions: - r6040: restore MDIO clock frequency after MAC reset - tcp: fix tp->undo_retrans accounting in tcp_sacktag_one() - dsa: flush switchdev workqueue before tearing down CPU/DSA ports Previous releases - always broken: - ptp: dp83640: don't define PAGE0, avoid compiler warning - igc: fix tunnel segmentation offloads - phylink: update SFP selected interface on advertising changes - stmmac: fix system hang caused by eee_ctrl_timer during suspend/resume - mlx5e: fix mutual exclusion between CQE compression and HW TS Misc: - bpf, cgroups: fix cgroup v2 fallback on v1/v2 mixed mode - sfc: fallback for lack of xdp tx queues - hns3: add option to turn off page pool feature" * tag 'net-5.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (67 commits) mlxbf_gige: clear valid_polarity upon open igc: fix tunnel offloading net/{mlx5|nfp|bnxt}: Remove unnecessary RTNL lock assert net: wan: wanxl: define CROSS_COMPILE_M68K selftests: nci: replace unsigned int with int net: dsa: flush switchdev workqueue before tearing down CPU/DSA ports Revert "net: phy: Uniform PHY driver access" net: dsa: destroy the phylink instance on any error in dsa_slave_phy_setup ptp: dp83640: don't define PAGE0 bnx2x: Fix enabling network interfaces without VFs Revert "Revert "ipv4: fix memory leaks in ip_cmsg_send() callers"" tcp: fix tp->undo_retrans accounting in tcp_sacktag_one() net-caif: avoid user-triggerable WARN_ON(1) bpf, selftests: Add test case for mixed cgroup v1/v2 bpf, selftests: Add cgroup v1 net_cls classid helpers bpf, cgroups: Fix cgroup v2 fallback on v1/v2 mixed mode bpf: Add oversize check before call kvcalloc() net: hns3: fix the timing issue of VF clearing interrupt sources net: hns3: fix the exception when query imp info net: hns3: disable mac in flr process ...
2021-09-16selftests: kvm: fix get_run_delay() ignoring fscanf() return warnShuah Khan
Fix get_run_delay() to check fscanf() return value to get rid of the following warning. When fscanf() fails return MIN_RUN_DELAY_NS from get_run_delay(). Move MIN_RUN_DELAY_NS from steal_time.c to test_util.h so get_run_delay() and steal_time.c can use it. lib/test_util.c: In function ‘get_run_delay’: lib/test_util.c:316:2: warning: ignoring return value of ‘fscanf’ declared with attribute ‘warn_unused_result’ [-Wunused-result] 316 | fscanf(fp, "%ld %ld ", &val[0], &val[1]); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-09-16selftests: kvm: move get_run_delay() into lib/test_utilShuah Khan
get_run_delay() is defined static in xen_shinfo_test and steal_time test. Move it to lib and remove code duplication. Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-09-16selftests:kvm: fix get_trans_hugepagesz() ignoring fscanf() return warnShuah Khan
Fix get_trans_hugepagesz() to check fscanf() return value to get rid of the following warning: lib/test_util.c: In function ‘get_trans_hugepagesz’: lib/test_util.c:138:2: warning: ignoring return value of ‘fscanf’ declared with attribute ‘warn_unused_result’ [-Wunused-result] 138 | fscanf(f, "%ld", &size); | ^~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-09-16selftests:kvm: fix get_warnings_count() ignoring fscanf() return warnShuah Khan
Fix get_warnings_count() to check fscanf() return value to get rid of the following warning: x86_64/mmio_warning_test.c: In function ‘get_warnings_count’: x86_64/mmio_warning_test.c:85:2: warning: ignoring return value of ‘fscanf’ declared with attribute ‘warn_unused_result’ [-Wunused-result] 85 | fscanf(f, "%d", &warnings); | ^~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-09-16torture: Make kvm-remote.sh print size of downloaded tarballPaul E. McKenney
This commit causes kvm-remote.sh to print the size of the tarball that is downloaded to each of the remote systems. This size can help with performance projections and analysis. Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-09-16torture: Allot 1G of memory for scftorture runsPaul E. McKenney
By default, torture.sh allots 512M of memory for each guest OS. However, when running scftorture with KASAN, 1G is needed. This commit therefore causes torture.sh to provide the required 1G. Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-09-16selftests: nci: replace unsigned int with intXiang wangx
Should not use comparison of unsigned expressions < 0. Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15selftests: be sure to make khdr before other targetsLi Zhijian
LKP/0Day reported some building errors about kvm, and errors message are not always same: - lib/x86_64/processor.c:1083:31: error: ‘KVM_CAP_NESTED_STATE’ undeclared (first use in this function); did you mean ‘KVM_CAP_PIT_STATE2’? - lib/test_util.c:189:30: error: ‘MAP_HUGE_16KB’ undeclared (first use in this function); did you mean ‘MAP_HUGE_16GB’? Although kvm relies on the khdr, they still be built in parallel when -j is specified. In this case, it will cause compiling errors. Here we mark target khdr as NOTPARALLEL to make it be always built first. CC: Philip Li <philip.li@intel.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-09-15selftests/bpf: Skip btf_tag test if btf_tag attribute not supportedYonghong Song
Commit c240ba287890 ("selftests/bpf: Add a test with a bpf program with btf_tag attributes") added btf_tag selftest to test BTF_KIND_TAG generation from C source code, and to test kernel validation of generated BTF types. But if an old clang (clang 13 or earlier) is used, the following compiler warning may be seen: progs/tag.c:23:20: warning: unknown attribute 'btf_tag' ignored and the test itself is marked OK. The compiler warning is bad and the test itself shouldn't be marked OK. This patch added the check for btf_tag attribute support. If btf_tag is not supported by the clang, the attribute will not be used in the code and the test will be marked as skipped. For example, with clang 13: ./test_progs -t btf_tag #21 btf_tag:SKIP Summary: 1/0 PASSED, 1 SKIPPED, 0 FAILED The selftests/README.rst is updated to clarify when the btf_tag test may be skipped. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210915061036.2577971-1-yhs@fb.com
2021-09-15selftests: net: test ethtool -L vs mqJakub Kicinski
Add a selftest for checking mq children are visible after ethtool -L. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-14selftests/bpf: Add a test with a bpf program with btf_tag attributesYonghong Song
Add a bpf program with btf_tag attributes. The program is loaded successfully with the kernel. With the command bpftool btf dump file ./tag.o the following dump shows that tags are properly encoded: [8] STRUCT 'key_t' size=12 vlen=3 'a' type_id=2 bits_offset=0 'b' type_id=2 bits_offset=32 'c' type_id=2 bits_offset=64 [9] TAG 'tag1' type_id=8 component_id=-1 [10] TAG 'tag2' type_id=8 component_id=-1 [11] TAG 'tag1' type_id=8 component_id=1 [12] TAG 'tag2' type_id=8 component_id=1 ... [21] FUNC_PROTO '(anon)' ret_type_id=2 vlen=1 'x' type_id=2 [22] FUNC 'foo' type_id=21 linkage=static [23] TAG 'tag1' type_id=22 component_id=0 [24] TAG 'tag2' type_id=22 component_id=0 [25] TAG 'tag1' type_id=22 component_id=-1 [26] TAG 'tag2' type_id=22 component_id=-1 ... [29] VAR 'total' type_id=27, linkage=global [30] TAG 'tag1' type_id=29 component_id=-1 [31] TAG 'tag2' type_id=29 component_id=-1 If an old clang compiler, which does not support btf_tag attribute, is used, these btf_tag attributes will be silently ignored. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210914223058.248949-1-yhs@fb.com
2021-09-14selftests/bpf: Test BTF_KIND_TAG for deduplicationYonghong Song
Add unit tests for BTF_KIND_TAG deduplication for - struct and struct member - variable - func and func argument Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210914223052.248535-1-yhs@fb.com
2021-09-14selftests/bpf: Add BTF_KIND_TAG unit testsYonghong Song
Test good and bad variants of BTF_KIND_TAG encoding. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210914223047.248223-1-yhs@fb.com
2021-09-14selftests/bpf: Change NAME_NTH/IS_NAME_NTH for BTF_KIND_TAG formatYonghong Song
BTF_KIND_TAG ELF format has a component_idx which might have value -1. test_btf may confuse it with common_type.name as NAME_NTH checkes high 16bit to be 0xffff. Change NAME_NTH high 16bit check to be 0xfffe so it won't confuse with component_idx. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210914223041.248009-1-yhs@fb.com
2021-09-14selftests/bpf: Test libbpf API function btf__add_tag()Yonghong Song
Add btf_write tests with btf__add_tag() function. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210914223036.247560-1-yhs@fb.com
2021-09-14selftests/bpf: Fix .gitignore to not ignore test_progs.cAndrii Nakryiko
List all possible test_progs flavors explicitly to avoid accidentally ignoring valid source code files. In this case, test_progs.c was still ignored after recent 809ed84de8b3 ("selftests/bpf: Whitelist test_progs.h from .gitignore") fix that added exception only for test_progs.h. Fixes: 74b5a5968fe8 ("selftests/bpf: Replace test_progs and test_maps w/ general rule") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20210914162228.3995740-1-andrii@kernel.org
2021-09-14bpf,x64 Emit IMUL instead of MUL for x86-64Jie Meng
IMUL allows for multiple operands and saving and storing rax/rdx is no longer needed. Signedness of the operands doesn't matter here because the we only keep the lower 32/64 bit of the product for 32/64 bit multiplications. Signed-off-by: Jie Meng <jmeng@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210913211337.1564014-1-jmeng@fb.com
2021-09-14selftests/bpf: Update selftests to always provide "struct_ops" SECAndrii Nakryiko
Update struct_ops selftests to always specify "struct_ops" section prefix. Libbpf will require a proper BPF program type set in the next patch, so this prevents tests breaking. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20210914014733.2768-2-andrii@kernel.org
2021-09-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2021-09-14 The following pull-request contains BPF updates for your *net* tree. We've added 7 non-merge commits during the last 13 day(s) which contain a total of 18 files changed, 334 insertions(+), 193 deletions(-). The main changes are: 1) Fix mmap_lock lockdep splat in BPF stack map's build_id lookup, from Yonghong Song. 2) Fix BPF cgroup v2 program bypass upon net_cls/prio activation, from Daniel Borkmann. 3) Fix kvcalloc() BTF line info splat on oversized allocation attempts, from Bixuan Cui. 4) Fix BPF selftest build of task_pt_regs test for arm64/s390, from Jean-Philippe Brucker. 5) Fix BPF's disasm.{c,h} to dual-license so that it is aligned with bpftool given the former is a build dependency for the latter, from Daniel Borkmann with ACKs from contributors. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-13torture: Make torture.sh print the number of files to be compressedPaul E. McKenney
Compressing gigabyte vmlinux files can take some time, and it can be a bit annoying to not know many more batches of compression there will be. This commit therefore makes torture.sh print the number of files to be compressed just before starting compression and just after compression completes. Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-09-13bpf, selftests: Add test case for mixed cgroup v1/v2Daniel Borkmann
Minimal selftest which implements a small BPF policy program to the connect(2) hook which rejects TCP connection requests to port 60123 with EPERM. This is being attached to a non-root cgroup v2 path. The test asserts that this works under cgroup v2-only and under a mixed cgroup v1/v2 environment where net_classid is set in the former case. Before fix: # ./test_progs -t cgroup_v1v2 test_cgroup_v1v2:PASS:server_fd 0 nsec test_cgroup_v1v2:PASS:client_fd 0 nsec test_cgroup_v1v2:PASS:cgroup_fd 0 nsec test_cgroup_v1v2:PASS:server_fd 0 nsec run_test:PASS:skel_open 0 nsec run_test:PASS:prog_attach 0 nsec test_cgroup_v1v2:PASS:cgroup-v2-only 0 nsec run_test:PASS:skel_open 0 nsec run_test:PASS:prog_attach 0 nsec run_test:PASS:join_classid 0 nsec (network_helpers.c:219: errno: None) Unexpected success to connect to server test_cgroup_v1v2:FAIL:cgroup-v1v2 unexpected error: -1 (errno 0) #27 cgroup_v1v2:FAIL Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED After fix: # ./test_progs -t cgroup_v1v2 #27 cgroup_v1v2:OK Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210913230759.2313-3-daniel@iogearbox.net
2021-09-13bpf, selftests: Add cgroup v1 net_cls classid helpersDaniel Borkmann
Minimal set of helpers for net_cls classid cgroupv1 management in order to set an id, join from a process, initiate setup and teardown. cgroupv2 helpers are left as-is, but reused where possible. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210913230759.2313-2-daniel@iogearbox.net
2021-09-13bpf, selftests: Replicate tailcall limit test for indirect call caseDaniel Borkmann
The tailcall_3 test program uses bpf_tail_call_static() where the JIT would patch a direct jump. Add a new tailcall_6 test program replicating exactly the same test just ensuring that bpf_tail_call() uses a map index where the verifier cannot make assumptions this time. In other words, this will now cover both on x86-64 JIT, meaning, JIT images with emit_bpf_tail_call_direct() emission as well as JIT images with emit_bpf_tail_call_indirect() emission. # echo 1 > /proc/sys/net/core/bpf_jit_enable # ./test_progs -t tailcalls #136/1 tailcalls/tailcall_1:OK #136/2 tailcalls/tailcall_2:OK #136/3 tailcalls/tailcall_3:OK #136/4 tailcalls/tailcall_4:OK #136/5 tailcalls/tailcall_5:OK #136/6 tailcalls/tailcall_6:OK #136/7 tailcalls/tailcall_bpf2bpf_1:OK #136/8 tailcalls/tailcall_bpf2bpf_2:OK #136/9 tailcalls/tailcall_bpf2bpf_3:OK #136/10 tailcalls/tailcall_bpf2bpf_4:OK #136/11 tailcalls/tailcall_bpf2bpf_5:OK #136 tailcalls:OK Summary: 1/11 PASSED, 0 SKIPPED, 0 FAILED # echo 0 > /proc/sys/net/core/bpf_jit_enable # ./test_progs -t tailcalls #136/1 tailcalls/tailcall_1:OK #136/2 tailcalls/tailcall_2:OK #136/3 tailcalls/tailcall_3:OK #136/4 tailcalls/tailcall_4:OK #136/5 tailcalls/tailcall_5:OK #136/6 tailcalls/tailcall_6:OK [...] For interpreter, the tailcall_1-6 tests are passing as well. The later tailcall_bpf2bpf_* are failing due lack of bpf2bpf + tailcall support in interpreter, so this is expected. Also, manual inspection shows that both loaded programs from tailcall_3 and tailcall_6 test case emit the expected opcodes: * tailcall_3 disasm, emit_bpf_tail_call_direct(): [...] b: push %rax c: push %rbx d: push %r13 f: mov %rdi,%rbx 12: movabs $0xffff8d3f5afb0200,%r13 1c: mov %rbx,%rdi 1f: mov %r13,%rsi 22: xor %edx,%edx _ 24: mov -0x4(%rbp),%eax | limit check 2a: cmp $0x20,%eax | 2d: ja 0x0000000000000046 | 2f: add $0x1,%eax | 32: mov %eax,-0x4(%rbp) |_ 38: nopl 0x0(%rax,%rax,1) 3d: pop %r13 3f: pop %rbx 40: pop %rax 41: jmpq 0xffffffffffffe377 [...] * tailcall_6 disasm, emit_bpf_tail_call_indirect(): [...] 47: movabs $0xffff8d3f59143a00,%rsi 51: mov %edx,%edx 53: cmp %edx,0x24(%rsi) 56: jbe 0x0000000000000093 _ 58: mov -0x4(%rbp),%eax | limit check 5e: cmp $0x20,%eax | 61: ja 0x0000000000000093 | 63: add $0x1,%eax | 66: mov %eax,-0x4(%rbp) |_ 6c: mov 0x110(%rsi,%rdx,8),%rcx 74: test %rcx,%rcx 77: je 0x0000000000000093 79: pop %rax 7a: mov 0x30(%rcx),%rcx 7e: add $0xb,%rcx 82: callq 0x000000000000008e 87: pause 89: lfence 8c: jmp 0x0000000000000087 8e: mov %rcx,(%rsp) 92: retq [...] Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Tiezhu Yang <yangtiezhu@loongson.cn> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Acked-by: Paul Chaignon <paul@cilium.io> Link: https://lore.kernel.org/bpf/CAM1=_QRyRVCODcXo_Y6qOm1iT163HoiSj8U2pZ8Rj3hzMTT=HQ@mail.gmail.com Link: https://lore.kernel.org/bpf/20210910091900.16119-1-daniel@iogearbox.net
2021-09-13selftests/bpf: Add test for bpf_get_branch_snapshotSong Liu
This test uses bpf_get_branch_snapshot from a fexit program. The test uses a target function (bpf_testmod_loop_test) and compares the record against kallsyms. If there isn't enough record matching kallsyms, the test fails. Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20210910183352.3151445-4-songliubraving@fb.com
2021-09-13torture: Apply CONFIG_KCSAN_STRICT to kvm.sh --kcsan argumentPaul E. McKenney
Currently, the --kcsan argument to kvm.sh applies a laundry list of Kconfig options. Now that KCSAN provides the CONFIG_KCSAN_STRICT Kconfig option, this commit reduces the laundry list to this one option. Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-09-13selftests/powerpc: Add scv versions of the basic TM syscall testsNicholas Piggin
The basic TM vs syscall test code hard codes an sc instruction for the system call, which fails to cover scv even when the userspace libc has support for it. Duplicate the tests with hard coded scv variants so both are tested when possible. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Fix build on old toolchains by using .long for scv] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210903125707.1601269-2-npiggin@gmail.com
generated by cgit v1.2.3 (git 2.39.1) at 2026-09-20 16:52:52 +0000