From 224d718f2f6b084e9d362f98dcb3ba9feabe28fe Mon Sep 17 00:00:00 2001 From: Swati Agarwal Date: Mon, 6 Apr 2026 16:31:13 +0530 Subject: arm64: dts: qcom: lemans-evk: Enable secondary USB controller in host mode MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Enable secondary USB controller in host mode on lemans EVK Platform. Secondary USB controller is connected to a Genesys Logic USB HUB GL3590 having 4 ports. The ports of hub that are present on lemans EVK standalone board are used as follows:- 1) port-1 is connected to HD3SS3220 Type-C port controller. 2) port-4 is used for the M.2 E key on corekit. Standard core kit uses UART for Bluetooth. This port is to be used only if user optionally replaces the WiFi card with the NFA765 chip which uses USB for Bluetooth. Remaining 2 ports will become functional when the interface plus mezzanine board is stacked on top of corekit: 3) port-2 is connected to another hub which is present on the mezz through which 4 type-A ports are connected. 4) port-3 is used for the M.2 B key for a 5G card when the mezz is connected. Secondary USB Controller ↓ GL3590 USB Hub (4 ports) | |-- Port 1 → HD3SS3220 Type‑C Port Controller → USB‑C Connector | |-- Port 2 → Mezzanine USB Hub (when mezz attached) | |-- Port 3 → M.2 B‑Key Slot (when mezz attached) | |-- Port 4 → M.2 E‑Key Slot (Default: BT via UART; USB only if NFA765 module is installed) Mark the second USB controller as host only capable and add the HD3SS3220 Type-C port controller along with Type-C connector for controlling vbus supply. Signed-off-by: Swati Agarwal Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20260406110113.1709886-3-swati.agarwal@oss.qualcomm.com Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/lemans-evk.dts | 168 ++++++++++++++++++++++++++++++++ 1 file changed, 168 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/lemans-evk.dts b/arch/arm64/boot/dts/qcom/lemans-evk.dts index c8c54ad01223..0b01be78a737 100644 --- a/arch/arm64/boot/dts/qcom/lemans-evk.dts +++ b/arch/arm64/boot/dts/qcom/lemans-evk.dts @@ -69,6 +69,37 @@ }; }; + connector-1 { + compatible = "usb-c-connector"; + label = "USB1-Type-C"; + data-role = "host"; + power-role = "source"; + + vbus-supply = <&usb1_vbus>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb1_con_hs_ep: endpoint { + remote-endpoint = <&usb_hub_2_1>; + }; + }; + + port@1 { + reg = <1>; + + usb1_con_ss_ep: endpoint { + remote-endpoint = <&hd3ss3220_1_in_ep>; + }; + + }; + }; + }; + connector-2 { compatible = "gpio-usb-b-connector", "usb-b-connector"; label = "micro-USB"; @@ -161,6 +192,15 @@ enable-active-high; }; + usb1_vbus: regulator-usb1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1_vbus"; + gpio = <&expander1 3 GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + }; + usb2_vbus: regulator-usb2-vbus { compatible = "regulator-fixed"; regulator-name = "usb2_vbus"; @@ -565,6 +605,39 @@ }; }; }; + + usb-typec@47 { + compatible = "ti,hd3ss3220"; + reg = <0x47>; + + interrupts-extended = <&pmm8654au_2_gpios 6 IRQ_TYPE_EDGE_FALLING>; + + id-gpios = <&tlmm 51 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&usb1_id>, <&usb1_intr>; + pinctrl-names = "default"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hd3ss3220_1_in_ep: endpoint { + remote-endpoint = <&usb1_con_ss_ep>; + }; + }; + + port@1 { + reg = <1>; + + hd3ss3220_1_out_ep: endpoint { + remote-endpoint = <&usb_hub_3_1>; + }; + }; + }; + }; }; &i2c18 { @@ -756,6 +829,14 @@ power-source = <0>; }; + usb1_intr: usb1-intr-state { + pins = "gpio6"; + function = "normal"; + input-enable; + bias-pull-up; + power-source = <0>; + }; + usb2_id: usb2-id-state { pins = "gpio11"; function = "normal"; @@ -956,6 +1037,12 @@ function = "gpio"; bias-pull-up; }; + + usb1_id: usb1-id-state { + pins = "gpio51"; + function = "gpio"; + bias-pull-up; + }; }; &uart0 { @@ -1014,6 +1101,87 @@ status = "okay"; }; +&usb_1 { + dr_mode = "host"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "okay"; + + usb_hub_2_x: hub@1 { + compatible = "usb5e3,610"; + reg = <1>; + + peer-hub = <&usb_hub_3_x>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + usb_hub_2_1: endpoint { + remote-endpoint = <&usb1_con_hs_ep>; + }; + }; + + /* + * Port-4 is connected to M.2 E key connector on corekit. + */ + port@4 { + reg = <4>; + + usb_hub_2_4: endpoint { + }; + }; + }; + }; + + usb_hub_3_x: hub@2 { + compatible = "usb5e3,625"; + reg = <2>; + + peer-hub = <&usb_hub_2_x>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + usb_hub_3_1: endpoint { + remote-endpoint = <&hd3ss3220_1_out_ep>; + }; + }; + + port@4 { + reg = <4>; + + usb_hub_3_4: endpoint { + }; + }; + }; + }; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l7a>; + vdda18-supply = <&vreg_l6c>; + vdda33-supply = <&vreg_l9a>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l1c>; + vdda-pll-supply = <&vreg_l7a>; + + status = "okay"; +}; + &usb_2 { status = "okay"; }; -- cgit v1.2.3