kernel/git/stable/linux.git/Documentation/devicetree/bindings/goldfish, branch master

Merge tag 'tty-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2026-02-17T17:30:52+00:00

Pull tty / serial driver updates from Greg KH: "Here is the small amount of tty and serial driver updates for 7.0-rc1. Nothing major in here at all, just some driver updates and minor tweaks and cleanups including: - sh-sci serial driver updates - 8250 driver updates - attempt to make the tty ports have their own workqueue, but was reverted after testing found it to have problems on some platforms. This will probably come back for 7.1 after it has been reworked and resubmitted - other tiny tty driver changes All of these have been in linux-next for a while with no reported problems" * tag 'tty-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (49 commits) Revert "tty: tty_port: add workqueue to flip TTY buffer" tty: tty_port: add workqueue to flip TTY buffer serial: 8250_pci: Remove custom deprecated baud setting routine serial: 8250_omap: Remove custom deprecated baud setting routine dt-bindings: serial: renesas,scif: Document RZ/G3L SoC serial: 8250: omap: set out-of-band wakeup if wakeup pinctrl exists tty: hvc-iucv: Remove KMSG_COMPONENT macro dt-bindings: serial: google,goldfish-tty: Convert to DT schema dt-bindings: serial: sh-sci: Fold single-entry compatibles into enum serial: 8250: 8250_omap.c: Clear DMA RX running status only after DMA termination is done serial: 8250: 8250_omap.c: Add support for handling UART error conditions serial: SH_SCI: improve "DMA support" prompt serial: Kconfig: fix ordering of entries for menu display serial: 8250: fix ordering of entries for menu display serial: imx: change SERIAL_IMX_CONSOLE to bool 8250_men_mcb: drop unneeded MODULE_ALIAS serial: men_z135_uart: drop unneeded MODULE_ALIAS dt-bindings: serial: renesas,rsci: Document RZ/V2H(P) and RZ/V2N SoCs serial: rsci: Convert to FIELD_MODIFY() dt-bindings: serial: 8250: add SpacemiT K3 UART compatible ...

Merge tag 'char-misc-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2026-02-17T17:11:04+00:00

Pull char/misc/IIO driver updates from Greg KH: "Here is the big set of char/misc/iio and other smaller driver subsystem changes for 7.0-rc1. Lots of little things in here, including: - Loads of iio driver changes and updates and additions - gpib driver updates - interconnect driver updates - i3c driver updates - hwtracing (coresight and intel) driver updates - deletion of the obsolete mwave driver - binder driver updates (rust and c versions) - mhi driver updates (causing a merge conflict, see below) - mei driver updates - fsi driver updates - eeprom driver updates - lots of other small char and misc driver updates and cleanups All of these have been in linux-next for a while, with no reported issues" * tag 'char-misc-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (297 commits) mux: mmio: fix regmap leak on probe failure rust_binder: return p from rust_binder_transaction_target_node() drivers: android: binder: Update ARef imports from sync::aref rust_binder: fix needless borrow in context.rs iio: magn: mmc5633: Fix Kconfig for combination of I3C as module and driver builtin iio: sca3000: Fix a resource leak in sca3000_probe() iio: proximity: rfd77402: Add interrupt handling support iio: proximity: rfd77402: Document device private data structure iio: proximity: rfd77402: Use devm-managed mutex initialization iio: proximity: rfd77402: Use kernel helper for result polling iio: proximity: rfd77402: Align polling timeout with datasheet iio: cros_ec: Allow enabling/disabling calibration mode iio: frequency: ad9523: correct kernel-doc bad line warning iio: buffer: buffer_impl.h: fix kernel-doc warnings iio: gyro: itg3200: Fix unchecked return value in read_raw MAINTAINERS: add entry for ADE9000 driver iio: accel: sca3000: remove unused last_timestamp field iio: accel: adxl372: remove unused int2_bitmask field iio: adc: ad7766: Use iio_trigger_generic_data_rdy_poll() iio: magnetometer: Remove IRQF_ONESHOT ...

Merge tag 'input-for-v7.0-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2026-02-15T16:24:19+00:00

Pull input updates from Dmitry Torokhov: - support for FocalTech FT8112 added to i2c-hid driver - support for FocalTech FT3518 added to edt-ft5x06 driver - support for power buttons in TWL603x chips added to twl4030-pwrbutton driver - an update to gpio-decoder driver to make it usable on non-OF platforms and to clean up the code - an update to synaptics_i2c driver switching it to use managed resources and a fix to restarting polling after resume - an update to gpio-keys driver to fall back to getting IRQ from resources if not specified using other means - an update to ili210x driver to support polling mode - a number of input drivers switched to scnprintf() to suppress truncation warnings - a number of updates and conversions of device tree bindings to yaml format - fixes to spelling in comments and messages in several drivers - other assorted fixups * tag 'input-for-v7.0-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits) dt-bindings: input: qcom,pm8941-pwrkey: Document PMM8654AU dt-bindings: input: touchscreen: imagis: allow linux,keycodes for ist3038 Input: apbps2 - fix comment style and typos Input: gpio_keys - fall back to platform_get_irq() for interrupt-only keys Input: novatek-nvt-ts - drop wake_type check dt-bindings: input: touchscreen: tsc2007: document '#io-channel-cells' Input: ili210x - add support for polling mode dt-bindings: touchscreen: trivial-touch: Drop 'interrupts' requirement for old Ilitek Input: appletouch - fix potential race between resume and open HID: i2c-hid: Add FocalTech FT8112 dt-bindings: input: i2c-hid: Introduce FocalTech FT8112 Input: synaptics_i2c - switch to using managed resources Input: synaptics_i2c - guard polling restart in resume Input: gpio_decoder - don't use "proxy" headers Input: gpio_decoder - make use of the macros from bits.h Input: gpio_decoder - replace custom loop by gpiod_get_array_value_cansleep() Input: gpio_decoder - unify messages with help of dev_err_probe() Input: gpio_decoder - make use of device properties Input: serio - complete sizeof(*pointer) conversions Input: wdt87xx_i2c - switch to use dev_err_probe() ...

Merge tag 'for-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

2026-02-13T02:24:37+00:00

Pull power supply and reset updates from Sebastian Reichel: "power-supply core: - sysfs: constify pointer passed to dev_attr_psp - extend DT binding documentation for battery cells to allow describing voltage drop behaviour power-supply drivers: - multiple: Remove unused gpio include header - multiple: Fix potential IRQ use-after-free on driver unload - bd71828: Add support for ROHM BD72720 - misc small fixes reset drivers: - tdx-ec-poweroff: fix restart" * tag 'for-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (30 commits) power: supply: bd71828: Use dev_err_probe() dt-bindings: power: supply: google,goldfish-battery: Convert to DT schema power: supply: qcom_battmgr: Recognize "LiP" as lithium-polymer power: supply: wm97xx: Use devm_power_supply_register() power: supply: wm97xx: Use devm_kcalloc() power: supply: pm8916_lbc: Fix use-after-free for extcon in IRQ handler power: reset: tdx-ec-poweroff: fix restart docs: power: update documentation about removed function power: supply: wm97xx: Fix NULL pointer dereference in power_supply_changed() MAINTAINERS: adjust file entry in ROHM BD71828 CHARGER power: supply: ab8500_chargalg: improve kernel-doc power: supply: sysfs: Constify pointer passed to dev_attr_psp() power: supply: bq27xxx: fix wrong errno when bus ops are unsupported power: reset: nvmem-reboot-mode: respect cell size for nvmem_cell_write power: supply: sbs-battery: Fix use-after-free in power_supply_changed() power: supply: rt9455: Fix use-after-free in power_supply_changed() power: supply: pm8916_lbc: Fix use-after-free in power_supply_changed() power: supply: pm8916_bms_vm: Fix use-after-free in power_supply_changed() power: supply: pf1550: Fix use-after-free in power_supply_changed() power: supply: goldfish: Fix use-after-free in power_supply_changed() ...

dt-bindings: power: supply: google,goldfish-battery: Convert to DT schema

2026-01-30T20:00:48+00:00

Convert the Android Goldfish Battery binding to DT schema format. Move the file to the power/supply directory to match the subsystem. Update the example node name to 'battery' to comply with generic node naming standards. Signed-off-by: Kuan-Wei Chiu Reviewed-by: Krzysztof Kozlowski Link: https://patch.msgid.link/20260113092602.3197681-5-visitorckw@gmail.com Signed-off-by: Sebastian Reichel

dt-bindings: input: google,goldfish-events-keypad: Convert to DT schema

2026-01-20T19:56:10+00:00

Convert the Android Goldfish Events Keypad binding to DT schema format. Move the file to the input directory to match the subsystem. Update the example node name to 'keypad' to comply with generic node naming standards. Signed-off-by: Kuan-Wei Chiu Reviewed-by: Krzysztof Kozlowski Link: https://patch.msgid.link/20260113092602.3197681-4-visitorckw@gmail.com Signed-off-by: Dmitry Torokhov

dt-bindings: serial: google,goldfish-tty: Convert to DT schema

2026-01-16T13:25:57+00:00

Convert the Google Goldfish TTY binding to DT schema format. Move the file to the serial directory to match the subsystem. Update the example node name to 'serial' to comply with generic node naming standards. Signed-off-by: Kuan-Wei Chiu Reviewed-by: Krzysztof Kozlowski Link: https://patch.msgid.link/20260113092602.3197681-2-visitorckw@gmail.com Signed-off-by: Greg Kroah-Hartman

dt-bindings: misc: google,android-pipe: Convert to DT schema

2026-01-16T13:22:23+00:00

Convert the Android Goldfish QEMU Pipe binding to DT schema format. Move the file to the misc directory as it represents a miscellaneous communication device. Update the example node name to 'pipe' to comply with generic node naming standards and fix the mismatch between unit address and reg property in the original example. Signed-off-by: Kuan-Wei Chiu Reviewed-by: Krzysztof Kozlowski Reviewed-by: Rob Herring (Arm) Link: https://patch.msgid.link/20260113092602.3197681-3-visitorckw@gmail.com Signed-off-by: Greg Kroah-Hartman

dt-bindings: sound: google,goldfish-audio: Convert to DT schema

2026-01-14T13:36:00+00:00

Convert the Android Goldfish Audio binding to DT schema format. Move the file to the sound directory to match the subsystem. Update the example node name to 'sound' to comply with generic node naming standards. Signed-off-by: Kuan-Wei Chiu Reviewed-by: Krzysztof Kozlowski Link: https://patch.msgid.link/20260113092602.3197681-6-visitorckw@gmail.com Signed-off-by: Mark Brown

Documentation: fix typo 'Andorid' -> 'Android' in goldfish pipe binding

2025-09-03T14:01:26+00:00

This patch fixes a small typo in the goldfish pipe binding documentation: 'Andorid' -> 'Android'. Signed-off-by: Masaharu Noguchi Link: https://lore.kernel.org/r/20250901154812.570319-1-nogunix@gmail.com Signed-off-by: Rob Herring (Arm)