kernel/git/stable/linux.git/Documentation/hwmon/adm1275, branch master

docs: hwmon: Add an index file and rename docs to *.rst

2019-04-17T17:37:23+00:00

Now that all files were converted to ReST format, rename them and add an index. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Guenter Roeck

docs: hwmon: pmbus files: convert to ReST format

2019-04-17T16:51:06+00:00

Convert pmbus files to ReST format, in order to allow them to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Guenter Roeck

hwmon: (adm1275) Allow setting shunt reg value

2018-12-03T00:25:28+00:00

The ADM series of hotswap controllers support extending the current measurement range by using a sensing resistor value other than the typical 1 mOhm. For example, using a 0.5 mOhm sensing resistor doubles the maximal current can be measured. Current driver assumes a shunt resistor value of 1 mOhm in calculation, meaning for other resistor values, hwmon will report scaled current/power measurements. This patch parses device tree parameter "shunt-resistor-micro-ohms", if there is one. Signed-off-by: Kun Yi Signed-off-by: Guenter Roeck

hwmon: (pmbus/adm1275) Add support for ADM1272

2018-03-22T16:32:17+00:00

The chip is quite similar to other chips in the series, but as usual it comes with its own quirks. Signed-off-by: Guenter Roeck

hwmon: (adm1275) Add support for ADM1278

2016-03-05T14:36:03+00:00

ADM1278 is mostly compatible to other chips of the same series. Besides the usual difference in coefficients, it supports a temperature sensor, and it can measure both input and output voltage at the same time. Signed-off-by: Guenter Roeck

Doc: hwmon: Fix typo "montoring" in hwmon

2016-03-05T14:25:34+00:00

This patch fix typos found in files within Documentation/hwmon. Signed-off-by: Masanari Iida Signed-off-by: Guenter Roeck

hwmon: (adm1275) Add support for ADM1293 and ADM1294

2015-08-09T20:44:27+00:00

ADM1293 and ADM1294 are mostly compatible with other chips of the same series, but have more configuration options. There are also some differences in register details. Signed-off-by: Guenter Roeck

hwmon: Update my e-mail address in driver documentation

2013-03-04T05:45:47+00:00

Most of the hwmon driver documentation still listed my old invalid e-mail address. Fix it. Signed-off-by: Guenter Roeck Acked-by: Jean Delvare

Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

2012-03-21T17:37:25+00:00

Pull hwmon changes for v3.4 from Guenter Roeck: "Mostly cleanup. No new drivers this time around, but support for several chips added to existing drivers: TPS40400, TPS40422, MTD040, MAX34446, ZL9101M, ZL9117M, and LM96080. Also, added watchdog support for SCH56xx, and additional attributes for a couple of drivers." * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (137 commits) hwmon: (sch56xx) Add support for the integrated watchdog (v2) hwmon: (w83627ehf) Add support for temperature offset registers hwmon: (jc42) Remove unnecessary device IDs hwmon: (zl6100) Add support for ZL9101M and ZL9117M hwmon: (adm1275) Add support for ADM1075 hwmon: (max34440) Add support for MAX34446 hwmon: (pmbus) Add more virtual registers hwmon: (pmbus) Add support for Lineage Power MDT040 hwmon: (pmbus) Add support for TI TPS40400 and TPS40422 hwmon: (max34440) Add support for 'lowest' output voltage attribute hwmon: (jc42) Convert to use devm_kzalloc hwmon: (max16065) Convert to use devm_kzalloc hwmon: (smm665) Convert to use devm_kzalloc hwmon: (ltc4261) Convert to use devm_kzalloc hwmon: (pmbus) Simplify remove functions hwmon: (pmbus) Convert pmbus drivers to use devm_kzalloc hwmon: (lineage-pem) Convert to use devm_kzalloc hwmon: (hwmon-vid) Fix checkpatch issues hwmon: (hwmon-vid) Add new entries to VRM model table hwmon: (lm80) Add detection of NatSemi/TI LM96080 ...

hwmon: (adm1275) Add support for ADM1075

2012-03-19T01:27:52+00:00

Signed-off-by: Guenter Roeck