kernel/git/stable/linux.git/Documentation/hwmon/f71882fg, branch master

docs: hwmon: Add an index file and rename docs to *.rst

2019-04-17T17:37:23+00:00

Now that all files were converted to ReST format, rename them and add an index. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Guenter Roeck

docs: hwmon: convert remaining files to ReST format

2019-04-17T17:36:05+00:00

Convert all other hwmon files to ReST format, in order to allow them to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Guenter Roeck

doc: fix typo in Documentation/hwmon/f71882fg

2019-01-07T22:40:29+00:00

Just fix a typo in Documentation/hwmon/f71882fg. Signed-off-by: Chengguang Xu Signed-off-by: Jonathan Corbet

hwmon: (f71882fg) Add support for the F71869A

2011-07-03T11:32:53+00:00

The F71869A is almost the same as the F71869F/E, except that it has the normal number of temp and pwm zones for a F71882FG derived chip, rather then the limited number of the F71869F/E. Signed-off-by: Hans de Goede Tested-by: Max Baldwin Acked-by: Guenter Roeck Signed-off-by: Jean Delvare

hwmon: (f71882fg) Add support for F71808A

2011-05-25T18:43:32+00:00

Signed-off-by: Hans de Goede Signed-off-by: Jean Delvare

hwmon: (f71882fg) Add support for the F71889A

2011-03-26T09:45:02+00:00

Signed-off-by: Hans de Goede Acked-by: Guenter Roeck Signed-off-by: Jean Delvare

hwmon: (f71882fg) Add support for the F81865F

2011-03-26T09:45:02+00:00

Add support for the Fintek F81865F. It's essentially compatible with the F71882FG, but has fewer inputs: 7 voltage, 2 temperature and 2 fan inputs only. Signed-off-by: Jean Delvare Acked-by: Hans de Goede Acked-by: Guenter Roeck

hwmon: (f71882fg) Document all supported devices

2011-03-26T09:45:02+00:00

The list of supported devices was not always well documented in all places. Clarify and list all devices in documentation, Kconfig and the driver itself. Signed-off-by: Jean Delvare Acked-by: Hans de Goede Acked-by: Guenter Roeck

hwmon/f71882fg: Add support for f71869f and f71869e

2011-03-15T05:39:26+00:00

Note that these 2 are register compatible and report the same superio id, but they are 2 distinct chips / models! Signed-off-by: Hans de Goede Tested-by: Thomas Faber Tested-by: Alexey Sychev Tested-by: Dieter Bloms Signed-off-by: Guenter Roeck

hwmon/f71882fg: Add support for f71889ed

2011-03-15T05:39:25+00:00

Note that this patch also makes 2 changes to the code paths for the f71889fg to keep the code unified between the 2 (for simplicities sake). Both of these are harmless for then f71889fg: 1) The first change is to always set the FAN_PROG_SEL bit to 0. This influences accesses to some banked fan / pwm registers. On the f71889fg no registers which we use are banked. On the f71889ed however some more fan registers have been banked including one which we use, by making the FAN_PROG_SEL bit 0, address 0x96 will point to the right register. 2) The second change is to see a FANx_TEMP_SEL value of 0 as pointing to a PECI / AMDSI value, and thus disable our pwm related sysfs attr. This is correct for the f71889ed and on the f71889fg 0 is a reserved value, so we should never see it and if we do, disabling the pwm related sysfs attr is a sane thing to do. Signed-off-by: Hans de Goede Tested-by: Thomas Greve Tested-by: Sander Eikelenboom Signed-off-by: Guenter Roeck