kernel/git/stable/linux.git/arch/alpha/mm/numa.c, branch master

alpha: remove DISCONTIGMEM and NUMA

2021-06-29T17:53:55+00:00

Patch series "Remove DISCONTIGMEM memory model", v3. SPARSEMEM memory model was supposed to entirely replace DISCONTIGMEM a (long) while ago. The last architectures that used DISCONTIGMEM were updated to use other memory models in v5.11 and it is about the time to entirely remove DISCONTIGMEM from the kernel. This set removes DISCONTIGMEM from alpha, arc and m68k, simplifies memory model selection in mm/Kconfig and replaces usage of redundant CONFIG_NEED_MULTIPLE_NODES and CONFIG_FLAT_NODE_MEM_MAP with CONFIG_NUMA and CONFIG_FLATMEM respectively. I've also removed NUMA support on alpha that was BROKEN for more than 15 years. There were also minor updates all over arch/ to remove mentions of DISCONTIGMEM in comments and #ifdefs. This patch (of 9): NUMA is marked broken on alpha for more than 15 years and DISCONTIGMEM was replaced with SPARSEMEM in v5.11. Remove both NUMA and DISCONTIGMEM support from alpha. Link: https://lkml.kernel.org/r/20210608091316.3622-1-rppt@kernel.org Link: https://lkml.kernel.org/r/20210608091316.3622-2-rppt@kernel.org Signed-off-by: Mike Rapoport Acked-by: Arnd Bergmann Acked-by: David Hildenbrand Cc: Geert Uytterhoeven Cc: Ivan Kokshaysky Cc: Jonathan Corbet Cc: Matt Turner Cc: Richard Henderson Cc: Vineet Gupta Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mm: remove unneeded includes of

2020-08-07T18:33:26+00:00

Patch series "mm: cleanup usage of " Most architectures have very similar versions of pXd_alloc_one() and pXd_free_one() for intermediate levels of page table. These patches add generic versions of these functions in and enable use of the generic functions where appropriate. In addition, functions declared and defined in headers are used mostly by core mm and early mm initialization in arch and there is no actual reason to have the included all over the place. The first patch in this series removes unneeded includes of In the end it didn't work out as neatly as I hoped and moving pXd_alloc_track() definitions to would require unnecessary changes to arches that have custom page table allocations, so I've decided to move lib/ioremap.c to mm/ and make pgalloc-track.h local to mm/. This patch (of 8): In most cases header is required only for allocations of page table memory. Most of the .c files that include that header do not use symbols declared in and do not require that header. As for the other header files that used to include , it is possible to move that include into the .c file that actually uses symbols from and drop the include from the header file. The process was somewhat automated using sed -i -E '/[<"]asm\/pgalloc\.h/d' \ $(grep -L -w -f /tmp/xx \ $(git grep -E -l '[<"]asm/pgalloc\.h')) where /tmp/xx contains all the symbols defined in arch/*/include/asm/pgalloc.h. [rppt@linux.ibm.com: fix powerpc warning] Signed-off-by: Mike Rapoport Signed-off-by: Andrew Morton Reviewed-by: Pekka Enberg Acked-by: Geert Uytterhoeven [m68k] Cc: Abdul Haleem Cc: Andy Lutomirski Cc: Arnd Bergmann Cc: Christophe Leroy Cc: Joerg Roedel Cc: Max Filippov Cc: Peter Zijlstra Cc: Satheesh Rajendran Cc: Stafford Horne Cc: Stephen Rothwell Cc: Steven Rostedt Cc: Joerg Roedel Cc: Matthew Wilcox Link: http://lkml.kernel.org/r/20200627143453.31835-1-rppt@kernel.org Link: http://lkml.kernel.org/r/20200627143453.31835-2-rppt@kernel.org Signed-off-by: Linus Torvalds

alpha: simplify detection of memory zone boundaries

2020-06-04T03:09:43+00:00

free_area_init() only requires the definition of maximal PFN for each of the supported zone rater than calculation of actual zone sizes and the sizes of the holes between the zones. After removal of CONFIG_HAVE_MEMBLOCK_NODE_MAP the free_area_init() is available to all architectures. Using this function instead of free_area_init_node() simplifies the zone detection. Signed-off-by: Mike Rapoport Signed-off-by: Andrew Morton Tested-by: Hoan Tran [arm64] Cc: Baoquan He Cc: Brian Cain Cc: Catalin Marinas Cc: "David S. Miller" Cc: Geert Uytterhoeven Cc: Greentime Hu Cc: Greg Ungerer Cc: Guan Xuetao Cc: Guo Ren Cc: Heiko Carstens Cc: Helge Deller Cc: "James E.J. Bottomley" Cc: Jonathan Corbet Cc: Ley Foon Tan Cc: Mark Salter Cc: Matt Turner Cc: Max Filippov Cc: Michael Ellerman Cc: Michal Hocko Cc: Michal Simek Cc: Nick Hu Cc: Paul Walmsley Cc: Richard Weinberger Cc: Rich Felker Cc: Russell King Cc: Stafford Horne Cc: Thomas Bogendoerfer Cc: Tony Luck Cc: Vineet Gupta Cc: Yoshinori Sato Link: http://lkml.kernel.org/r/20200412194859.12663-7-rppt@kernel.org Signed-off-by: Linus Torvalds

mm: remove CONFIG_HAVE_MEMBLOCK_NODE_MAP option

2020-06-04T03:09:43+00:00

CONFIG_HAVE_MEMBLOCK_NODE_MAP is used to differentiate initialization of nodes and zones structures between the systems that have region to node mapping in memblock and those that don't. Currently all the NUMA architectures enable this option and for the non-NUMA systems we can presume that all the memory belongs to node 0 and therefore the compile time configuration option is not required. The remaining few architectures that use DISCONTIGMEM without NUMA are easily updated to use memblock_add_node() instead of memblock_add() and thus have proper correspondence of memblock regions to NUMA nodes. Still, free_area_init_node() must have a backward compatible version because its semantics with and without CONFIG_HAVE_MEMBLOCK_NODE_MAP is different. Once all the architectures will use the new semantics, the entire compatibility layer can be dropped. To avoid addition of extra run time memory to store node id for architectures that keep memblock but have only a single node, the node id field of the memblock_region is guarded by CONFIG_NEED_MULTIPLE_NODES and the corresponding accessors presume that in those cases it is always 0. Signed-off-by: Mike Rapoport Signed-off-by: Andrew Morton Tested-by: Hoan Tran [arm64] Acked-by: Catalin Marinas [arm64] Cc: Baoquan He Cc: Brian Cain Cc: "David S. Miller" Cc: Geert Uytterhoeven Cc: Greentime Hu Cc: Greg Ungerer Cc: Guan Xuetao Cc: Guo Ren Cc: Heiko Carstens Cc: Helge Deller Cc: "James E.J. Bottomley" Cc: Jonathan Corbet Cc: Ley Foon Tan Cc: Mark Salter Cc: Matt Turner Cc: Max Filippov Cc: Michael Ellerman Cc: Michal Hocko Cc: Michal Simek Cc: Nick Hu Cc: Paul Walmsley Cc: Richard Weinberger Cc: Rich Felker Cc: Russell King Cc: Stafford Horne Cc: Thomas Bogendoerfer Cc: Tony Luck Cc: Vineet Gupta Cc: Yoshinori Sato Link: http://lkml.kernel.org/r/20200412194859.12663-4-rppt@kernel.org Signed-off-by: Linus Torvalds

alpha: fix hang caused by the bootmem removal

2018-12-14T23:05:44+00:00

The conversion of alpha to memblock as the early memory manager caused boot to hang as described at [1]. The issue is caused because for CONFIG_DISCTONTIGMEM=y case, memblock_add() is called using memory start PFN that had been rounded down to the nearest 8Mb and it caused memblock to see more memory that is actually present in the system. Besides, memblock allocates memory from high addresses while bootmem was using low memory, which broke the assumption that early allocations are always accessible by the hardware. This patch ensures that memblock_add() is using the correct PFN for the memory start and forces memblock to use bottom-up allocations. [1] https://lkml.org/lkml/2018/11/22/1032 Link: http://lkml.kernel.org/r/1543233216-25833-1-git-send-email-rppt@linux.ibm.com Reported-by: Meelis Roos Signed-off-by: Mike Rapoport Tested-by: Meelis Roos Cc: Richard Henderson Cc: Ivan Kokshaysky Cc: Matt Turner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mm: remove include/linux/bootmem.h

2018-10-31T15:54:16+00:00

Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include @@ @@ - #include + #include [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport Signed-off-by: Stephen Rothwell Acked-by: Michal Hocko Cc: Catalin Marinas Cc: Chris Zankel Cc: "David S. Miller" Cc: Geert Uytterhoeven Cc: Greentime Hu Cc: Greg Kroah-Hartman Cc: Guan Xuetao Cc: Ingo Molnar Cc: "James E.J. Bottomley" Cc: Jonas Bonn Cc: Jonathan Corbet Cc: Ley Foon Tan Cc: Mark Salter Cc: Martin Schwidefsky Cc: Matt Turner Cc: Michael Ellerman Cc: Michal Simek Cc: Palmer Dabbelt Cc: Paul Burton Cc: Richard Kuo Cc: Richard Weinberger Cc: Rich Felker Cc: Russell King Cc: Serge Semin Cc: Thomas Gleixner Cc: Tony Luck Cc: Vineet Gupta Cc: Yoshinori Sato Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

alpha: switch to NO_BOOTMEM

2018-10-26T23:25:20+00:00

Replace bootmem allocator with memblock and enable use of NO_BOOTMEM like on most other architectures. Alpha gets the description of the physical memory from the firmware as an array of memory clusters. Each cluster that is not reserved by the firmware is added to memblock.memory. Once the memblock.memory is set up, we reserve the kernel and initrd pages with memblock reserve. Since we don't need the bootmem bitmap anymore, the code that finds an appropriate place is removed. The conversion does not take care of NUMA support which is marked broken for more than 10 years now. Link: http://lkml.kernel.org/r/1535952894-10967-1-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport Cc: Richard Henderson Cc: Ivan Kokshaysky Cc: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

mm/alpha: unify mem_init() for both UMA and NUMA architectures

2013-07-03T23:07:39+00:00

Now mem_init() for both Alpha UMA and Alpha NUMA are the same, so unify it to reduce duplicated code. Signed-off-by: Jiang Liu Cc: Richard Henderson Cc: Ivan Kokshaysky Cc: Matt Turner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mm/alpha: prepare for removing num_physpages and simplify mem_init()

2013-07-03T23:07:35+00:00

Prepare for removing num_physpages and simplify mem_init(). Signed-off-by: Jiang Liu Cc: Richard Henderson Cc: Ivan Kokshaysky Cc: Matt Turner Cc: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds