kernel/git/stable/linux.git/arch/arm/mach-shark, branch master

ARM: delete mach-shark

2013-09-17T10:34:36+00:00

The Shark machine sub-architecture (also known as DNARD, the DIGITAL Network Appliance Reference Design) lacks a maintainer able to apply and test patches to modernize the architecture. It is suspected that the current kernel, while it compiles, does not even boot on this machine. The listed maintainer has expressed that he will not be able to spend any time on the maintenance for the coming year. So let's delete it from the kernel for now. It can always be resurrected with git revert if maintenance is resumed. As the VIA82c505 PCI adapter was only used by this architecture, that gets deleted too. Cc: arm@kernel.org Cc: Alexander Schulz Signed-off-by: Linus Walleij

reboot: arm: change reboot_mode to use enum reboot_mode

2013-07-09T17:33:29+00:00

Preparing to move the parsing of reboot= to generic kernel code forces the change in reboot_mode handling to use the enum. [akpm@linux-foundation.org: fix arch/arm/mach-socfpga/socfpga.c] Signed-off-by: Robin Holt Cc: Russell King Cc: Russ Anderson Cc: Robin Holt Cc: H. Peter Anvin Cc: Guan Xuetao Acked-by: Russell King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

arm: Use generic idle loop

2013-04-08T15:39:24+00:00

Use the generic idle loop and replace enable/disable_hlt with the respective core functions. Signed-off-by: Thomas Gleixner Cc: Linus Torvalds Cc: Rusty Russell Cc: Paul McKenney Cc: Peter Zijlstra Reviewed-by: Cc: Srivatsa S. Bhat Cc: Magnus Damm Cc: Russell King Tested-by: Kevin Hilman # OMAP Link: http://lkml.kernel.org/r/20130321215233.826238797@linutronix.de

Merge tag 'cleanup-decompwdog-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/cleanup

2013-02-05T18:26:20+00:00

From Shawn Guo: The series cleans up ARCH_HAS_DECOMP_WDOG and arch_decomp_wdog which are unused on ARM architecure. Samsung has some code setting up wdog in arch_decomp_wdog(). But since CONFIG_S3C_BOOT_WATCHDOG is defined nowhere, it will not run. Otherwise, system can not boot at all when wdog is set up but no one pats it. * tag 'cleanup-decompwdog-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: samsung: remove unused arch_decomp_wdog() code ARM: remove unused arch_decomp_wdog() ARM: decompress: remove unused ARCH_HAS_DECOMP_WDOG Signed-off-by: Olof Johansson

ARM: remove unused arch_decomp_wdog()

2013-01-11T02:54:03+00:00

With ARCH_HAS_DECOMP_WDOG removed from arch/arm/boot/compressed/decompress.c, all the arch_decomp_wdog() definition at platform level is unneeded. Remmove it. Signed-off-by: Shawn Guo Acked-by: Nicolas Pitre Acked-by: Jason Cooper

ARM: delete struct sys_timer

2012-12-24T16:36:38+00:00

Now that the only field in struct sys_timer is .init, delete the struct, and replace the machine descriptor .timer field with the initialization function itself. This will enable moving timer drivers into drivers/clocksource without having to place a public prototype of each struct sys_timer object into include/linux; the intent is to create a single of_clocksource_init() function that determines which timer driver to initialize by scanning the device dtree, much like the proposed irqchip_init() at: http://www.spinics.net/lists/arm-kernel/msg203686.html Includes mach-omap2 fixes from Igor Grinberg. Tested-by: Robert Jarzmik Signed-off-by: Stephen Warren

Merge branch 'late/fixes' into fixes

2012-10-07T14:22:32+00:00

This is a series from Arnd that fixes a number of compiler warnings when building defconfigs on ARM. * late/fixes: ARM: footbridge: nw_gpio_lock is raw_spin_lock ARM: mv78xx0: correct addr_map_cfg __initdata annotation ARM: footbridge: remove RTC_IRQ definition ARM: soc: dependency warnings for errata ARM: ks8695: __arch_virt_to_dma type handling ARM: rpc: check device_register return code in ecard_probe ARM: davinci: don't mark da850_register_cpufreq as __init ARM: iop13xx: fix iq81340sc_atux_map_irq prototype ARM: iop13xx: mark iop13xx_scan_bus as __devinit ARM: mv78xx0: mark mv78xx0_timer_init as __init_refok ARM: s3c24xx: fix multiple section mismatch warnings ARM: at91: unused variable in at91_pm_verify_clocks ARM: at91: skip at91_io_desc definition for NOMMU ARM: pxa: work around duplicate definition of GPIO24_SSP1_SFRM ARM: pxa: remove sharpsl_fatal_check function ARM: pxa: define palmte2_pxa_keys conditionally ARM: pxa: Wunused-result warning in viper board file ARM: shark: fix shark_pci_init return code Fixed trivial conflicts in arch/arm/mach-at91/setup.c. Signed-off-by: Olof Johansson

ARM: shark: fix shark_pci_init return code

2012-10-04T08:19:51+00:00

When run on the wrong platform, the shark_pci_init function returns an undefined value, as reported by a gcc warning, so let's just return -ENODEV. Without this patch, building shark_defconfig results in: arch/arm/mach-shark/pci.c: In function 'shark_pci_init': arch/arm/mach-shark/pci.c:42:3: warning: 'return' with no value, in function returning non-void [-Wreturn-type] Signed-off-by: Arnd Bergmann Cc: "Krzysztof Halasa"

Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2012-10-02T01:46:13+00:00

Pull ARM soc driver specific changes from Olof Johansson: - A long-coming conversion of various platforms to a common LED infrastructure - AT91 is moved over to use the newer MCI driver for MMC - Pincontrol conversions for samsung platforms - DT bindings for gscaler on samsung - i2c driver fixes for tegra, acked by i2c maintainer Fix up conflicts as per Olof. * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits) drivers: bus: omap_l3: use resources instead of hardcoded irqs pinctrl: exynos: Fix wakeup IRQ domain registration check pinctrl: samsung: Uninline samsung_pinctrl_get_soc_data pinctrl: exynos: Correct the detection of wakeup-eint node pinctrl: exynos: Mark exynos_irq_demux_eint as inline pinctrl: exynos: Handle only unmasked wakeup interrupts pinctrl: exynos: Fix typos in gpio/wkup _irq_mask pinctrl: exynos: Set pin function to EINT in irq_set_type of GPIO EINTa drivers: bus: Move the OMAP interconnect driver to drivers/bus/ i2c: tegra: dynamically control fast clk i2c: tegra: I2_M_NOSTART functionality not supported in Tegra20 ARM: tegra: clock: remove unused clock entry for i2c ARM: tegra: clock: add connection name in i2c clock entry i2c: tegra: pass proper name for getting clock ARM: tegra: clock: add i2c fast clock entry in clock table ARM: EXYNOS: Adds G-Scaler device from Device Tree ARM: EXYNOS: Add clock support for G-Scaler ARM: EXYNOS: Enable pinctrl driver support for EXYNOS4 device tree enabled platform ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC ARM: EXYNOS: skip wakeup interrupt setup if pinctrl driver is used ...

ARM: mach-shark: retire custom LED code

2012-08-01T03:22:05+00:00

The CPU activity LED is now handled by the trigger in the leds subsystem, retire this old CONFIG_LEDS-based code. Signed-off-by: Bryan Wu