kernel/git/stable/linux.git/arch/arm/mach-tegra/Makefile.boot, branch master

ARM: tegra: convert to multi-platform

2013-03-30T00:10:25+00:00

This allows Tegra be included in a kernel build that supports multiple SoCs at once, which is useful for distro kernels. This change: * Moves Tegra's Kconfig into its own directory, as seems typical for multi-platform conversions. * Stops selecting some ARM errata that are incompatible with multi- platform. This requires that you use a bootloader that enables the workaround! * Deletes some headers and Makefile.boot that aren't needed now that we support multi-platform. Signed-off-by: Stephen Warren

ARM: move all dtb targets out of Makefile.boot

2012-09-14T14:22:04+00:00

In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring Cc: Russell King Cc: Andrew Victor Cc: Nicolas Ferre Cc: Jean-Christophe Plagniol-Villard Cc: Kukjin Kim Cc: Sascha Hauer Cc: Jason Cooper Cc: Andrew Lunn Cc: Gregory Clement Acked-by: Shawn Guo Cc: Viresh Kumar Cc: Shiraz Hashim Cc: Rajeev Kumar Cc: Stephen Warren Cc: Srinidhi Kasagar Cc: Linus Walleij

Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2012-07-24T00:34:48+00:00

Pull arm-soc board specific updates from Arnd Bergmann: "These changes are all for individual board files. In the long run, those files will largely go away, and the amount of changes appears to be continuously decreasing, which is a good sign. This time around, changes are focused on tegra, omap and samsung." Fix conflicts in arch/arm/mach-{omap2/common-board-devices.c,tegra/Makefile.boot} as per the 'for-linus' branch. * tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits) ARM: EXYNOS: Add leds status1 and status2 on Origen board ARM: S3C64XX: Mark most Cragganmore initdata devinitdata ARM: EXYNOS: Add missing .reserve field to SMDKC210 ARM: EXYNOS: Add DRM device to SMDK4X12 board ARM: S3C64XX: Clean up after SPI driver platform data updates ARM: SAMSUNG: no need to set the value for clk_xusbxti when it is 24Mhz ARM: EXYNOS: Add framebuffer support for SMDK4X12 ARM: EXYNOS: Add HSOTG support to SMDK4X12 ARM: S5PV210: Add audio platform device in Goni board ARM: S5PV210: Add audio platform device in Aquila board ARM: EXYNOS: Add audio platform device in SMDKV310 board ARM: S3C64XX: Don't specify an irq_base for WM1192-EV1 board ARM: OMAP3: Fix omap3evm randconfig error introduced by VBUS support ARM: OMAP: board-omap4panda: MUX configuration for sys_nirq2 ARM: OMAP: board-4430sdp: MUX configuration for sys_nirq2 ARM: OMAP3530evm: set pendown_state and debounce time for ads7846 ARM: omap3evm: enable VBUS switch for EHCI tranceiver ARM: OMAP3EVM: Adding USB internal LDOs board file ARM: OMAP3EVM: Add NAND flash definition ARM: OMAP3: cm-t35: add tvp5150 decoder support ...

ARM: dt: tegra: add Whistler device tree file

2012-07-06T18:27:35+00:00

Whistler is a highly configurable Tegra evaluation and development board. This change adds support for the following specific configuration: E1120 motherboard E1108 CPU board E1116 PMU board The motherboard configuration switches are set as follows: SW1=0 SW2=0 SW3=5 S1/S2/S3/S4 all on, except S3 7/8 are off. Other combinations of daugher boards may work to varying degrees, but will likely require some SW adjustment. Signed-off-by: Stephen Warren

ARM: tegra: make .dts compilation depend on Tegra2 support

2012-06-20T18:37:40+00:00

Update Makefile.boot to compile *.dts when the appropriate Tegra SoC support is enabled, rather than requiring Kconfig to list each board individually. Remove CONFIG_MACH_VENTANA now that it has no use. Signed-off-by: Stephen Warren

ARM: dt: tegra: rename board files to match SoC

2012-06-20T18:30:10+00:00

Most ARM ${board}.dts files are already named ${soc}-${board}.dts. This change modifies the Tegra board files to be named the same way for consistency. Once a related change is made in U-Boot, this will cause both U-Boot and the kernel to use the same names for the .dts files and SoC identifiers, thus allowing U-Boot's recently added "soc" and "board" environment variables to be used to construct the name of Tegra .dtb files, and hence allow board-generic U-Boot bootcmd scripts to be written. Signed-off-by: Stephen Warren

arm/tegra: add support for tegra30 based board cardhu

2011-12-18T04:15:38+00:00

Add support for the tegra30 based cardhu development board. Cardhu is a tablet formfactor reference design for tegra30. The patch provides a device tree for the board, updates Makefile.boot to build the dtb, includes the platform in Kconfig and updates board-dt.c. Signed-off-by: Peter De Schrijver Acked-by: Stephen Warren Acked-by: Colin Cross Signed-off-by: Olof Johansson

arm/dt: tegra: add dts file for paz00

2011-12-08T04:47:50+00:00

This adds a dts file for paz00. As a side effect, this also enables the embedded controller which controls the keyboard, touchpad, power, leds, and some other functions. Cc: Grant Likely Signed-off-by: Marc Dietrich Acked-by: Stephen Warren Signed-off-by: Olof Johansson

arm/tegra: Add device-tree support for TrimSlice board

2011-12-08T04:47:49+00:00

* Add device-tree file for TrimSlice * Add that to the list of .dts files to build * Update board-dt.c to recognize TrimSlice board name v2: Makefile: Add board-trimslice-pinmux.c to obj-$(CONFIG_MACH_TEGRA_DT). v3: Makefile: Use brackets not braces around var names Signed-off-by: Stephen Warren Signed-off-by: Olof Johansson

Merge branch 'next/devel' of git://git.linaro.org/people/arnd/arm-soc

2011-11-02T03:31:25+00:00

* 'next/devel' of git://git.linaro.org/people/arnd/arm-soc: (50 commits) ARM: tegra: update defconfig arm/tegra: Harmony: Configure PMC for low-level interrupts arm/tegra: device tree support for ventana board arm/tegra: add support for ventana pinmuxing arm/tegra: prepare Seaboard pinmux code for derived boards arm/tegra: pinmux: ioremap registers gpio/tegra: Convert to a platform device arm/tegra: Convert pinmux driver to a platform device arm/dt: Tegra: Add pinmux node to tegra20.dtsi arm/tegra: Prep boards for gpio/pinmux conversion to pdevs ARM: mx5: fix clock usage for suspend ARM i.MX entry-macro.S: remove now unused code ARM i.MX boards: use CONFIG_MULTI_IRQ_HANDLER ARM i.MX tzic: add handle_irq function ARM i.MX avic: add handle_irq function ARM: mx25: Add the missing IIM base definition ARM i.MX avic: convert to use generic irq chip mx31moboard: Add poweroff support ARM: mach-qong: Add watchdog support ARM: davinci: AM18x: Add wl1271/wlan support ... Fix up conflicts in: arch/arm/mach-at91/at91sam9g45.c arch/arm/mach-mx5/devices-imx53.h arch/arm/plat-mxc/include/mach/memory.h