kernel/git/stable/linux.git/arch/arm/plat-omap/debug-devices.c, branch masterLinux kernel stable treehttps://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux.git/atom?h=master2012-12-14T19:48:06+00:00ARM: OMAP: Remove debug-devices.c2012-12-14T19:48:06+00:00Jon Hunterjon-hunter@ti.com2012-11-13T22:02:20+00:00urn:sha1:657b9deeed33cfb6f7171361accc6982727d2e0b
The OMAP2420 H4 board was the only board using the
plat-omap/debug-devices.c code for configuring ethernet support. Now
that OMAP2420 H4 has been migrated to use the generic gpmc code for
configuring ethernet support, the debug-devices.c file is no longer
used and so remove it and its header file.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
ARM: OMAP: Remove unnecessary mach and plat includes2012-11-02T19:00:36+00:00Tony Lindgrentony@atomide.com2012-10-31T19:38:43+00:00urn:sha1:7136f8d88c08f18158b63777fb270b62788ed169
Now mach/hardware.h is empty for omap2+ and can be
removed except for plat-omap/dmtimer.c for omap1.
Also the include of mach/irqs.h can now be removed
for shared plat-omap/i2c.c as it's no longer needed.
Signed-off-by: Tony Lindgren <tony@atomide.com>
ARM: OMAP: Fix relative includes for debug-devices.h2012-10-31T22:37:13+00:00Tony Lindgrentony@atomide.com2012-10-30T17:44:00+00:00urn:sha1:32dee01e67e0d14e86708c4ca6c5a9f4f81d5144
As discussed on linux-arm-kernel, we want to avoid
relative includes for the arch/arm/*omap* shared code:
http://www.spinics.net/lists/linux-omap/msg80520.html
Let's add plat/debug-devices.h for debug_card_init()
to fix the relative includes.
Note that drivers must not use this header as it will
break build for omap2+ CONFIG_MULTIPLATFORM builds.
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
ARM: OMAP: resolve sparse warning concerning debug_card_init()2012-10-16T21:05:50+00:00Paul Walmsleypaul@pwsan.com2012-10-16T18:19:17+00:00urn:sha1:3fca4eba9654ce2f44b82e33044d258945e755bf
Commit 801475ccb2b2c1928b22aec4b9e5285d9e347602 ("ARM: OMAP: move
debug_card_init() function") results in the following new sparse
warning:
arch/arm/plat-omap/debug-devices.c:71:12: warning: symbol 'debug_card_init' was not declared. Should it be static?
Fix by implementing Tony's suggestion to add a "sideways include" to the
new location of the debug-devices.h file in arch/arm/mach-omap2/.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
ARM: OMAP: remove plat/board.h file2012-09-10T23:39:21+00:00Igor Grinberggrinberg@compulab.co.il2012-08-28T23:18:57+00:00urn:sha1:cf3a6ec2c0a499ef019d25d4dbc79df66e7d3f0c
plat/board.h file is now empty - remove it.
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Chris Ball <cjb@laptop.org>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: linux-mmc@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
ARM: gpio: convert includes of mach/gpio.h and asm/gpio.h to linux/gpio.h2011-08-08T13:27:41+00:00Russell Kingrmk+kernel@arm.linux.org.uk2011-07-26T09:53:52+00:00urn:sha1:2f8163baada3dbd0ce891c35bc59ae46e773487a
Convert arch/arm includes of mach/gpio.h and asm/gpio.h to linux/gpio.h
before we start consolidating the individual platform implementations
of the gpio header files.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
omap: use smc91x_platdata to setup smc91x2009-12-12T00:16:33+00:00Ladislav Michlladis@linux-mips.org2009-12-12T00:16:33+00:00urn:sha1:3bc48014782a89f7201734d3e23865cb283926a7
Use smc91x_platdata to setup smc91x, so we can get rid of OMAP specific stuff
in smc91x driver
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
omap: headers: Move remaining headers from include/mach to include/plat2009-10-20T16:40:47+00:00Tony Lindgrentony@atomide.com2009-10-20T16:40:47+00:00urn:sha1:ce491cf85466c3377228c5a852ea627ec5136956
Move the remaining headers under plat-omap/include/mach
to plat-omap/include/plat. Also search and replace the
files using these headers to include using the right path.
This was done with:
#!/bin/bash
mach_dir_old="arch/arm/plat-omap/include/mach"
plat_dir_new="arch/arm/plat-omap/include/plat"
headers=$(cd $mach_dir_old && ls *.h)
omap_dirs="arch/arm/*omap*/ \
drivers/video/omap \
sound/soc/omap"
other_files="drivers/leds/leds-ams-delta.c \
drivers/mfd/menelaus.c \
drivers/mfd/twl4030-core.c \
drivers/mtd/nand/ams-delta.c"
for header in $headers; do
old="#include <mach\/$header"
new="#include <plat\/$header"
for dir in $omap_dirs; do
find $dir -type f -name \*.[chS] | \
xargs sed -i "s/$old/$new/"
done
find drivers/ -type f -name \*omap*.[chS] | \
xargs sed -i "s/$old/$new/"
for file in $other_files; do
sed -i "s/$old/$new/" $file
done
done
for header in $(ls $mach_dir_old/*.h); do
git mv $header $plat_dir_new/
done
Signed-off-by: Tony Lindgren <tony@atomide.com>
ARM: OMAP: Switch to gpio_request/free calls2008-12-11T01:35:30+00:00Jarkko Nikulajarkko.nikula@nokia.com2008-12-11T01:35:30+00:00urn:sha1:f2d18fea8b87d09bdda22cc67c36f5f463452a33
Switch to gpio_request/free calls
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
ARM: OMAP: use gpio_to_irq2008-12-11T01:35:26+00:00David Brownelldbrownell@users.sourceforge.net2008-12-11T01:35:26+00:00urn:sha1:15f74b0335962e8554c91e52d588dc9f8ee7098d
Have most uses of OMAP_GPIO_IRQ() use gpio_to_irq() instead.
Calls used for table initialization are left alone, at least
this time around.
(This patch is for code in both the OMAP tree and mainline.)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>