kernel/git/stable/linux.git/arch/arm64/boot, branch master

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2026-08-26T18:14:30+00:00

Pull clk updates from Stephen Boyd: "Mostly the usual clk driver updates and new SoC additions plus non-critical data fixes for things that weren't used yet. One thing that's new here in the core is SSC spread spectrum support (SSC) in the clk provider API. The idea is that DT authors will configure SSC for certain clks and they'll be configured at clk provider registration time or when a consumer device is probed, similar to how we handle assigned clk rates or parents. On the clk driver side we have Qualcomm adding almost half the diff because they add support for 4 different SoCs and then a long tail of other SoCs like Mediatek, Renesas, Rockchip, SpaceMiT, etc. add more SoC support this time around. Luckily it's mostly clk data for these new SoCs because the actual clk_ops are already there. Beyond the new drivers we get all the little fixups for more compilation coverage or usage of more modern APIs. That all looks normal. Finally, I kinda buried the lede, I'm bringing on Brian and Jerome to help out with maintaining the clk subsystem. The current working model is already semi-distributed in that silicon vendors typically take care of their drivers and send me pull requests but I'm becoming a bottleneck for new drivers and core framework review because this has become a 100% volunteer effort on my part. Mike is stepping down after all these years (thanks Mike!) and that jump started the conversation around finding co-maintainers. Brian and Jerome have graciously offered to help me with the work load, meaning in the future they'll be sending pull requests and committing directly to the clk.git tree. They've both been around on the list for a while, I've met them both in person, and they've been making changes to the core clk framework along with helping review patches so I'm pretty confident this will work well. Core: - devm_clk_bulk_get_enable() consumer API - devm_clk_hw_register_composite_pdata() provider API - Spread Spectrum Clock (SSC) support via DT bindings and provider APIs - Divider clk rounding improved (and tested) New Drivers: - Cix Sky1 audio subsystem (AUDSS) - UltraRISC DP1000 - MediaTek MT8173 MFG_TOP - Si549 - Aspeed AST2700 PECI - Airoha EN7523 PCIe - Rockchip RV1106 - Mobileye EyeQ7H - Qualcomm Maili GCC, TCSR, RPMh, and video clks - Qualcomm Shikra GCC, RPM, GPU, display, and audio clks - Qualcomm Nord display and graphics clks - Qualcomm Glymur camera and EVA clks - Qualcomm Hawi video clks - Amlogic A9 AO and peripheral clks - Renesas R-Car X5H (R8A78000) CPG" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (269 commits) clk: microchip: mpfs: fix regmap_update_bits() mask/val order clk: visconti: Make sure clk_init_data is fully initialized clk: ti: Make sure clk_init_data is fully initialized MAINTAINERS: Add Brian Masney and Jerome Brunet as co-maintainers for clk subsystem Drop Michael Turquette's clk maintainer entry clk: ti: composite: resolve parent clocks by DT index, not by name clk: ti: mux: resolve parent clocks by DT index, not by name clk: devres: fix cleanup in devm_clk_get_optional_enabled_with_rate() dt-bindings: clock: ti,keystone-gate: Convert to DT schema dt-bindings: clock: ti: Convert APLL clock to DT schema clk: zynq: pll: Fix kernel-doc after determine_rate() conversion dt-bindings: clock: ti,clockdomain: Convert to DT schema dt-bindings: clock: Correct white-space style clk: samsung: Don't include clk: at91: Read "reg" with helper clk: renesas: Add R-Car X5H CPG driver clk: rockchip: rk3576: fix source muxes for SPI0..SPI4 clk: rockchip: Add clock controller for the RV1106 dt-bindings: clock: rockchip: Add RV1106 CRU support dt-bindings: clock: Document Renesas R-Car X5H Clock Pulse Generator ...

Merge tag 'rproc-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux

2026-08-25T21:03:31+00:00

Pull remoteproc updates from Bjorn Andersson: "Add a remoteproc driver and binding for AMD MicroBlaze/V soft cores executing from dual-port BRAM, with clock and reset control and support for firmware without a resource table. Introduce a generic Qualcomm PAS service with SCM and OP-TEE backends, and migrate the PAS, MSS, and WCNSS remoteproc drivers to it. Add Nord ADSP and CDSP support, Eliza CDSP support, Maili ADSP/CDSP bindings, and late-attach SoCCP support for Kaanapali, Hawi, Maili, and Glymur. Enable BAM-DMUX child devices for PAS modems and fix PAS memory protection, handover, shutdown, and resource lifetime handling. Harden remoteproc lifecycle handling by attaching asynchronously, stopping crashed processors, synchronizing crash work with removal, and forcing shutdown before device resources are released. Reallocate resources during attach recovery and fix several reference and error-path leaks. Add Xilinx R5 crash detection and move RPU start and stop sequencing into the platform firmware driver. Consolidate write-combining carveout mapping callbacks, use correct I/O-memory accessors, and share optional ELF resource-table handling across drivers. Convert the TI Wakeup M3 binding to DT schema, correct Qualcomm and generic remoteproc bindings, and harden resource-table iteration against signed-offset out-of-bounds accesses" * tag 'rproc-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (60 commits) remoteproc: fix OOB read via signed offset in rsc_table_for_each_entry() remoteproc: replace BSD blurb with SPDX identifier in rsc_table.h remoteproc: replace BSD blurb with SPDX identifier in remoteproc.h remoteproc: fix coding style issues in remoteproc.h MAINTAINERS: add rsc_table.h to remoteproc entry remoteproc: qcom: pas: Add Nord ADSP and CDSP support dt-bindings: remoteproc: qcom,nord-pas: Document Nord PAS remoteproc: qcom: pas: Drop unused dtb_mem_region field remoteproc: qcom: pas: Map/unmap subsystem region before auth_and_reset remoteproc: qcom: pas: Fix the PAS context creation placement remoteproc: qcom: pas: Guard dtb metadata release with dtb_pas_id check remoteproc: qcom: annotate mem_region fields with __iomem arm64: dts: qcom: eliza: Add fallback compatible for ADSP remoteproc dt-bindings: remoteproc: qcom,milos-pas: Move Eliza ADSP to SM8550 schema remoteproc: qcom: pas: Add Eliza CDSP support dt-bindings: remoteproc: qcom,sm8550-pas: Add Eliza CDSP compatible remoteproc: qcom: q6v5: Request shutdown if crash is triggered host-side remoteproc: Force shutdown during device removal remoteproc: Prevent crash handling to race with rproc_del() remoteproc: Allow shutdown of crashed processors ...

Merge tag 'tty-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2026-08-25T17:59:12+00:00

Pull TTY / serial driver updates from Greg KH: "Here is the "big" set of tty and serial driver updates for 7.3-rc1. Not really all that much happened this development cycle for this subsystem, changes in here are: - removal of the ipwireless driver as it's no longer used or needed - new 8250_mxpcie driver added - qcom serial driver updates and additions - vt mode validation addition - lots of other small serial driver updates and additions All of these have been in linux-next for weeks with no reported issues" * tag 'tty-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (97 commits) serial: imx: serialize imx_uart_ports[] lifetime tty: clear cdev pointer after cdev_add() failure tty: skip cdev_del() when no cdev is registered serial: core: clear freed pointers on uart_register_driver() failure serial: core: do fallible allocations before the console can be registered serial: 8250_mxpcie: implement rx_trig_bytes callbacks via MUEx50 RTL serial: 8250_mxpcie: introduce per-port private data structure serial: 8250: allow UART drivers to override rx_trig_bytes handling serial: 8250_mxpcie: add break support for RS485 using MUEx50 features serial: 8250: allow low-level drivers to override break control serial: 8250_mxpcie: support serial interface mode switching serial: 8250_mxpcie: speed up TX using memory-mapped FIFO window serial: 8250_mxpcie: speed up RX using memory-mapped FIFO window serial: 8250_mxpcie: add custom handle_irq callback serial: 8250_mxpcie: offload XON/XOFF flow control to MUEx50 hardware serial: 8250_mxpcie: enable automatic RTS/CTS flow control serial: 8250_mxpcie: enable enhanced mode and program FIFO trigger levels serial: 8250: add Moxa MUEx50 UART port type serial: 8250: split Moxa PCIe serial board support out of 8250_pci serial: qcom-geni: Use geni_se_set_perf_level() for baud rate perf level ...

Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2026-08-24T15:46:03+00:00

Pull pin control updates from Linus Walleij: "Core changes: - Use the non-blocking mux_state_try_select() in the generic MUX pin control back-end - Free pin maps on pinctrl_generic_to_map() failure in the core helpers New hardware pin control: - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC (this is for the low power audio, LPASS = Low Power Audio SubSystem portions) - Upboard support on top of the Intel pin controller - Apple T6030 and T6031 support (just compatible strings) - Samsung Exynos 8855 SoC - Mediatek MT6858 SoC - Rockchip RK3308B and RV1106 SoCs - Airoha EN7523 and AN7563 SoCs Improvements: - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable - Qualcomm improvements on top of the Qualcomm PDC (power domain controller) irqchip improvements from tglx:s tree - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups - The NPCM8xx driver has been put into shape fixing many pin and group definitions - Some non-urgent Tegra 264 pin assignments are fixed up - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and pin assignments, missing features etc" * tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits) dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema pinctrl: meson: sync some modify from A4 pinctrl: meson: a4: Add input enable pin configuration pinctrl: realtek: rtd1625: remove unused group name spdif_sel pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13 dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema Revert "Merge branch 'ib-rsk7204' into devel" pinctrl: rockchip: Add RV1106 pinctrl support dt-bindings: pinctrl: rockchip: Add RV1106 compatible pinctrl: rockchip: Decode drive strength in the get function pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable pinctrl: airoha: add support of an7563 SoC dt-bindings: pinctrl: airoha: add support of an7563 pin controller pinctrl: airoha: try to find chip scu node by phandle first pinctrl: airoha: add support of en7523 SoC dt-bindings: pinctrl: airoha: add support of en7523 pin controller pinctrl: airoha: an7583: add support for olt pinmux pinctrl: airoha: an7583: add support for pon_alt pinmux pinctrl: airoha: an7583: add support for npu_uart pinmux dt-bindings: pinctrl: airoha: an7583: add missed features ...

Merge tag 'soc-dt-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2026-08-19T02:36:32+00:00

Pull SoC devicetree updates from Arnd Bergmann: "There are two new mystery SoCs with very little public information about them so far, Qualcomm's Cortex-A78C based "Shikra" and Altera's Cortex-A720 based Agilex72 SOCFPGA. We have also gained support for a couple of SoCs from the 2023/2024 timeframe that have been in the making for a while: - The Apple platform gains support for M3 Pro, Max and Ultra SoC, following the basic M3 support from 7.2. - Samsung Exynos 1580 is a high-end mobile phone SoC from 2024 - Canaan K230 is a RISC-V based 64-bit AI SoC, based on the earlier K210 chip - Sophgo SG2000 is a mixed Arm/RISC-V chip that was already supported using the Arm core but is now also added for RISC-V along with several other variants of the cv18xx series In terms of newly added machines we have reference platforms for all the chips above, plus - Only four 32-bit Arm boards: two older phones and two older industrial/embedded boards; using Allwinner, Qualcomm and Rockchip SoCs - Three laptops und three phones using Qualcomm SoCs - Ten 64-bit Rockchips based single-board computers, along with one NAS box and a game console. - Seven industrial/embedded boards and modules using NXP i.MX8/9 SoCs. - A Lenovo desktop box based on NVIDIA Jetson Xavier NX - A few more single-board computers based on Allwinnner A133, Spacemit K1 and TI AM62. As usual, there is a constant stream of minor cleanups and fixes towards addressing the 'dt-check-style --mode strict' warnings, and everyone is expected to address those warnings for new submissions now" * tag 'soc-dt-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (864 commits) Revert "riscv: dts: spacemit: k3: add i2s0-i2s5 nodes" Documentation/process: maintainer-soc: Mention expectation about dt-check-style ARM: dts: helios4: add SATA regulator supplies ARM: dts: helios4: add vcc-supply to GPIO expander ARM: dts: helios4: add vcc-supply to EEPROM arm64: dts: turris-mox: fix usb3 phys arm64: dts: ti: Correct white-space style arm64: dts: ti: k3-am64: Fix MDIO clock reference for ICSSG0 node arm64: dts: qcom: talos-evk: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies arm64: dts: qcom: sa8155p-adp: Fix swapped USB and UFS QMP PHY vdda-phy/vdda-pll supplies arm64: dts: qcom: eliza-mtp: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies arm64: dts: qcom: lemans: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies arm64: dts: qcom: glymur: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies arm64: dts: qcom: kaanapali: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies arm64: dts: qcom: sar2130p: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies arm64: dts: qcom: sm8750: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies arm64: dts: qcom: sm8650: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies arm64: dts: qcom: purwa: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies arm64: dts: qcom: hamoa: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies arm64: dts: qcom: sc8180x: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies ...

Merge tag 'mvebu-dt64-7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt

2026-08-17T13:08:09+00:00

mvebu dt64 for 7.3 (part 1) Fix usb3 phys declaration on Turris MOX an Armada 3700 based Soc * tag 'mvebu-dt64-7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: arm64: dts: turris-mox: fix usb3 phys Signed-off-by: Alexandre Belloni

Merge tag 'microchip-dt64-7.3' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt

2026-08-12T21:14:16+00:00

Microchip ARM64 device tree updates for v7.3 This update includes: - the device tree nodes for the QSPI controllers on LAN9691 SoC * tag 'microchip-dt64-7.3' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: arm64: dts: microchip: lan969x: add QSPI nodes Signed-off-by: Arnd Bergmann

Merge tag 'apple-soc-dt-7.3' of https://git.kernel.org/pub/scm/linux/kernel/git/sven/linux into soc/dt

2026-08-10T16:31:51+00:00

Apple SoC DTS changes for 7.3 - Initial M3 Pro, Max and Ultra device trees, which are responsible for the majority of the diffstat. These include CPU cores, interrupt controller, power state, watchdog, serial pin/gpio controller, i2c and the boot framebuffer. They are now on par with the base M3 device trees. - HWMON sensors for M1/M2 - "pmgr-misc" nodes for M1/2 Pro/Max/Ultra which saves about 1W of power on these machines. The corresponding driver and dt-binding are part of the Apple SoC driver changes tag for this cycle. Signed-off-by: Sven Peter * tag 'apple-soc-dt-7.3' of https://git.kernel.org/pub/scm/linux/kernel/git/sven/linux: (22 commits) arm64: dts: apple: Initial T6030 (M3 Pro) device trees arm64: dts: apple: Initial T603[124] (M3 Max and Ultra) device trees dt-bindings: pwm: apple,s5l-fpwm: Add t6030 and t6031 compatibles dt-bindings: i2c: apple,i2c: Add t6030 and t6031 compatibles dt-bindings: power: apple,pmgr-pwrstate: Add t6030 and t6031 compatibles dt-bindings: arm: apple: apple,pmgr: Add t6030 and t6031 compatibles dt-bindings: interrupt-controller: apple,aic2: Add apple,t6031-aic3 compatible dt-bindings: interrupt-controller: apple,aic2: Invert #interrupt-cells condition dt-bindings: arm: apple: Add M3 Pro/Max/Ultra devices (T603x) arm64: dts: apple: t60xx: jxxx: Add device-specific SMC hwmon sensors arm64: dts: apple: t8112: jxxx: Add device-specific SMC hwmon sensors arm64: dts: apple: t8103: jxxx: Add device-specific SMC hwmon sensors arm64: dts: apple: t602x: Add common SMC hwmon sensors arm64: dts: apple: t600x: Add common SMC hwmon sensors arm64: dts: apple: t8112: Add common SMC hwmon sensors arm64: dts: apple: t8103: Add common SMC hwmon sensors arm64: dts: apple: Add common SMC hwmon infrastructure arm64: dts: apple: t602x: Add SMC hwmon node arm64: dts: apple: t600x: Add SMC hwmon node arm64: dts: apple: t8103: Add SMC hwmon node ... Signed-off-by: Arnd Bergmann

Merge tag 'qcom-arm64-for-7.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt

2026-08-10T16:21:17+00:00

More Qualcomm Arm64 DeviceTree updates for v7.3 Introduce the Asus Zenbook A16 (UX3607OA). Add IPQ9574 PCIe bridge descriptions and enable PCIe0 and PCIe2 for QCN92xx Wi-Fi cards on RDP454. Align IPQ5018, IPQ6018, and IPQ8074 PCIe PHY and reset descriptions with the port-node binding. Extend Shikra platform enablement with CQM and IQS SoM Wi-Fi and Bluetooth descriptions. Enable CDSP, LPAICP, and MPSS remote processors on CQM, CQS, and IQS EVKs, and add SMP2P, QUPv3, DDR bandwidth monitor, CPU frequency hardware, EPSS L3 interconnect, OPP tables, thermal zones, GPIO reservations, and display and GPU clock controllers. Enable Eliza CQS EVK audio and add its LPASS macro and SoundWire descriptions. Add PMIC ADC support for Hamoa, Monaco, and Lemans, and ADC channel macros for the third-generation ADC block. Add minidump SRAM configurations across affected Qualcomm platforms. Fix QMP PHY vdda-phy and vdda-pll supply assignments across Qualcomm platforms. Correct PCIe IOMMU mappings for QCS6490, Lemans, Monaco, Talos, SM, SC, and related boards. Fix the Glymur/Mahua PDC interrupt mapping, USB HS properties, and wakeup configuration; correct board identifiers, pin configuration, GPIO supplies, default bus frequency, and DT validation issues. Enable the X1E80100 deepest idle state, configure SPMI ADC thermal monitoring on SM8550 and SM8650, add the Milos GPU clock controller, and assign SM8650 CCI clock rates. * tag 'qcom-arm64-for-7.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (117 commits) arm64: dts: qcom: talos-evk: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies arm64: dts: qcom: sa8155p-adp: Fix swapped USB and UFS QMP PHY vdda-phy/vdda-pll supplies arm64: dts: qcom: eliza-mtp: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies arm64: dts: qcom: lemans: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies arm64: dts: qcom: glymur: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies arm64: dts: qcom: kaanapali: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies arm64: dts: qcom: sar2130p: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies arm64: dts: qcom: sm8750: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies arm64: dts: qcom: sm8650: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies arm64: dts: qcom: purwa: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies arm64: dts: qcom: hamoa: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies arm64: dts: qcom: sc8180x: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies arm64: dts: qcom: sc7280: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies arm64: dts: qcom: sc7180: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies arm64: dts: qcom: sm7225-fairphone-fp4: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies arm64: dts: qcom: qcs6490: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies arm64: dts: qcom: qcm6490: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies arm64: dts: qcom: qcs8550-aim300: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies arm64: dts: qcom: sm8550: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies arm64: dts: qcom: sm8450: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies ... Signed-off-by: Arnd Bergmann

Merge tag 'ti-k3-dts-for-v7.3' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt

2026-08-10T16:16:40+00:00

TI K3 device tree updates for v7.3 SoC Specific Changes: AM64: - Non critical clock ID update for ICSSG MDIO Board Specific Changes: AM62L BeagleBadge: - New AM62L based BeagleBadge board Variscite VAR-SOM-AM62(P): - Add support for Variscite VAR-SOM-AM62 and Symphony carrier board - var-som-am62p: Fix Ethernet PHY configuration and update audio codec configuration - am62p5-var-som-symphony: Add touchscreen and TPM support AM69 Aquila (Toradex): - DSI adapters and Display addon board overlays - OV5640 CSI camera overlays AM62x (Toradex Verdin): - DSI adapters and Display addon board overlays AM62P-Verdin: - Add Toradex OV5640 CSI camera overlay - Add NAU8822 Bridge Tied Load audio support AM642 TQMa64xxl: - Misc non-urgent fixes AM67A BeagleY-AI: - Setup I2C for CSI/DSI connectors and add DSI0/CSI1 mux - Add IMX219 CSI0/CSI1 camera overlays - Add gpio line names AM68 phyBOARD-Izar: - Add pwm fan support AM625-BeaglePlay: - Add LincolnTech OLDI LCD-185 overlay AM625-SK: - Add Microtips OLDI SK-LCD1 overlay AM62L: - Add bootph-all property to usb0 AM62A7-SK: - Add bootph-all property in cpsw_mac_syscon node * tag 'ti-k3-dts-for-v7.3' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (37 commits) arm64: dts: ti: Correct white-space style arm64: dts: ti: k3-am64: Fix MDIO clock reference for ICSSG0 node arm64: dts: ti: k3-am67a-beagley-ai: Add gpio line names arm64: dts: ti: k3-am62a7-sk: Add bootph-all property in cpsw_mac_syscon node arm64: dts: ti: k3-am67a-beagley-ai: Add overlay for IMX219 on CSI1 arm64: dts: ti: k3-am67a-beagley-ai: Add overlay for IMX219 on CSI0 arm64: dts: ti: k3-am67a-beagley-ai: Add DSI0/CSI1 mux arm64: dts: ti: k3-am67a-beagley-ai: Setup I2C for CSI/DSI connectors arm64: dts: ti: Add LincolnTech OLDI LCD-185 Overlay for AM625-BeaglePlay arm64: dts: ti: k3-am68-phyboard-izar: Add pwm fan arm64: dts: ti: Add Microtips OLDI SK-LCD1 Overlay for AM625-SK arm64: dts: ti: k3-am62l: Add bootph to usb0 arm64: dts: ti: k3-am62x-verdin: Share UART_4 MCU reservation overlay arm64: dts: ti: k3-am62p-verdin: Add Toradex OV5640 CSI Cameras arm64: dts: ti: k3-am62p-verdin: Add NAU8822 Bridge Tied Load arm64: dts: ti: k3-am62-verdin: Add RPi Touch Display 2 7-inch arm64: dts: ti: k3-am62-verdin: Add Mezzanine with Toradex Display 10.1" LVDS arm64: dts: ti: k3-am62-verdin: Add Toradex DSI to LVDS adapter with the 10.1" V2 display arm64: dts: ti: k3-am62-verdin: Add Toradex Capacitive Touch Display 10.1" LVDS V2 arm64: dts: am62p5-var-som-symphony: add TPM support ... Signed-off-by: Arnd Bergmann