kernel/git/stable/linux.git/arch/arm64, branch linux-4.6.y

arm64: kernel: Save and restore UAO and addr_limit on exception entry

2016-07-27T15:42:16+00:00

commit e19a6ee2460bdd0d0055a6029383422773f9999a upstream. If we take an exception while at EL1, the exception handler inherits the original context's addr_limit and PSTATE.UAO values. To be consistent always reset addr_limit and PSTATE.UAO on (re-)entry to EL1. This prevents accidental re-use of the original context's addr_limit. Based on a similar patch for arm from Russell King. Acked-by: Will Deacon Reviewed-by: Mark Rutland Signed-off-by: James Morse Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman

arm64: mm: remove page_mapping check in __sync_icache_dcache

2016-07-27T15:42:16+00:00

commit 20c27a4270c775d7ed661491af8ac03264d60fc6 upstream. __sync_icache_dcache unconditionally skips the cache maintenance for anonymous pages, under the assumption that flushing is only required in the presence of D-side aliases [see 7249b79f6b4cc ("arm64: Do not flush the D-cache for anonymous pages")]. Unfortunately, this breaks migration of anonymous pages holding self-modifying code, where userspace cannot be reasonably expected to reissue maintenance instructions in response to a migration. This patch fixes the problem by removing the broken page_mapping(page) check from the cache syncing code, otherwise we may end up fetching and executing stale instructions from the PoU. Cc: Catalin Marinas Cc: Will Deacon Cc: Mark Rutland Reviewed-by: Catalin Marinas Signed-off-by: Shaokun Zhang Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman

arm64: fix dump_instr when PAN and UAO are in use

2016-07-27T15:42:16+00:00

commit c5cea06be060f38e5400d796e61cfc8c36e52924 upstream. If the kernel is set to show unhandled signals, and a user task does not handle a SIGILL as a result of an instruction abort, we will attempt to log the offending instruction with dump_instr before killing the task. We use dump_instr to log the encoding of the offending userspace instruction. However, dump_instr is also used to dump instructions from kernel space, and internally always switches to KERNEL_DS before dumping the instruction with get_user. When both PAN and UAO are in use, reading a user instruction via get_user while in KERNEL_DS will result in a permission fault, which leads to an Oops. As we have regs corresponding to the context of the original instruction abort, we can inspect this and only flip to KERNEL_DS if the original abort was taken from the kernel, avoiding this issue. At the same time, remove the redundant (and incorrect) comments regarding the order dump_mem and dump_instr are called in. Cc: Catalin Marinas Cc: James Morse Cc: Robin Murphy Signed-off-by: Mark Rutland Reported-by: Vladimir Murzin Tested-by: Vladimir Murzin Fixes: 57f4959bad0a154a ("arm64: kernel: Add support for User Access Override") Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman

arm64: mm: always take dirty state from new pte in ptep_set_access_flags

2016-06-24T17:22:03+00:00

commit 0106d456c4cb1770253fefc0ab23c9ca760b43f7 upstream. Commit 66dbd6e61a52 ("arm64: Implement ptep_set_access_flags() for hardware AF/DBM") ensured that pte flags are updated atomically in the face of potential concurrent, hardware-assisted updates. However, Alex reports that: | This patch breaks swapping for me. | In the broken case, you'll see either systemd cpu time spike (because | it's stuck in a page fault loop) or the system hang (because the | application owning the screen is stuck in a page fault loop). It turns out that this is because the 'dirty' argument to ptep_set_access_flags is always 0 for read faults, and so we can't use it to set PTE_RDONLY. The failing sequence is: 1. We put down a PTE_WRITE | PTE_DIRTY | PTE_AF pte 2. Memory pressure -> pte_mkold(pte) -> clear PTE_AF 3. A read faults due to the missing access flag 4. ptep_set_access_flags is called with dirty = 0, due to the read fault 5. pte is then made PTE_WRITE | PTE_DIRTY | PTE_AF | PTE_RDONLY (!) 6. A write faults, but pte_write is true so we get stuck The solution is to check the new page table entry (as would be done by the generic, non-atomic definition of ptep_set_access_flags that just calls set_pte_at) to establish the dirty state. Fixes: 66dbd6e61a52 ("arm64: Implement ptep_set_access_flags() for hardware AF/DBM") Reviewed-by: Catalin Marinas Reported-by: Alexander Graf Tested-by: Alexander Graf Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman

arm64: Provide "model name" in /proc/cpuinfo for PER_LINUX32 tasks

2016-06-24T17:22:03+00:00

commit e47b020a323d1b2a7b1e9aac86e99eae19463630 upstream. This patch brings the PER_LINUX32 /proc/cpuinfo format more in line with the 32-bit ARM one by providing an additional line: model name : ARMv8 Processor rev X (v8l) Acked-by: Will Deacon Signed-off-by: Catalin Marinas Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman

KVM: arm/arm64: vgic-v3: Clear all dirty LRs

2016-06-24T17:22:01+00:00

commit fa89c77e891917b5913f9be080f9131a9457bb3e upstream. When saving the state of the list registers, it is critical to reset them zero, as we could otherwise leave unexpected EOI interrupts pending for virtual level interrupts. Signed-off-by: Christoffer Dall Signed-off-by: Marc Zyngier Signed-off-by: Greg Kroah-Hartman

kvm: arm64: Fix EC field in inject_abt64

2016-06-01T19:17:58+00:00

commit e4fe9e7dc3828bf6a5714eb3c55aef6260d823a2 upstream. The EC field of the constructed ESR is conditionally modified by ORing in ESR_ELx_EC_DABT_LOW for a data abort. However, ESR_ELx_EC_SHIFT is missing from this condition. Signed-off-by: Matt Evans Acked-by: Marc Zyngier Signed-off-by: Christoffer Dall Signed-off-by: Greg Kroah-Hartman

arm64: cpuinfo: Missing NULL terminator in compat_hwcap_str

2016-06-01T19:17:57+00:00

commit f228b494e56d949be8d8ea09d4f973d1979201bf upstream. The loop that browses the array compat_hwcap_str will stop when a NULL is encountered, however NULL is missing at the end of array. This will lead to overrun until a NULL is found somewhere in the following memory. In reality, this works out because the compat_hwcap2_str array tends to follow immediately in memory, and that *is* terminated correctly. Furthermore, the unsigned int compat_elf_hwcap is checked before printing each capability, so we end up doing the right thing because the size of the two arrays is less than 32. Still, this is an obvious mistake and should be fixed. Note for backporting: commit 12d11817eaafa414 ("arm64: Move /proc/cpuinfo handling code") moved this code in v4.4. Prior to that commit, the same change should be made in arch/arm64/kernel/setup.c. Fixes: 44b82b7700d0 "arm64: Fix up /proc/cpuinfo" Signed-off-by: Julien Grall Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman

arm64: Implement pmdp_set_access_flags() for hardware AF/DBM

2016-06-01T19:17:57+00:00

commit 282aa7051b0169991b34716f0f22d9c2f59c46c4 upstream. The update to the accessed or dirty states for block mappings must be done atomically on hardware with support for automatic AF/DBM. The ptep_set_access_flags() function has been fixed as part of commit 66dbd6e61a52 ("arm64: Implement ptep_set_access_flags() for hardware AF/DBM"). This patch brings pmdp_set_access_flags() in line with the pte counterpart. Fixes: 2f4b829c625e ("arm64: Add support for hardware updates of the access and dirty pte bits") Reviewed-by: Will Deacon Signed-off-by: Catalin Marinas Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman

arm64: Implement ptep_set_access_flags() for hardware AF/DBM

2016-06-01T19:17:57+00:00

commit 66dbd6e61a526ae7d11a208238ae2c17e5cacb6b upstream. When hardware updates of the access and dirty states are enabled, the default ptep_set_access_flags() implementation based on calling set_pte_at() directly is potentially racy. This triggers the "racy dirty state clearing" warning in set_pte_at() because an existing writable PTE is overridden with a clean entry. There are two main scenarios for this situation: 1. The CPU getting an access fault does not support hardware updates of the access/dirty flags. However, a different agent in the system (e.g. SMMU) can do this, therefore overriding a writable entry with a clean one could potentially lose the automatically updated dirty status 2. A more complex situation is possible when all CPUs support hardware AF/DBM: a) Initial state: shareable + writable vma and pte_none(pte) b) Read fault taken by two threads of the same process on different CPUs c) CPU0 takes the mmap_sem and proceeds to handling the fault. It eventually reaches do_set_pte() which sets a writable + clean pte. CPU0 releases the mmap_sem d) CPU1 acquires the mmap_sem and proceeds to handle_pte_fault(). The pte entry it reads is present, writable and clean and it continues to pte_mkyoung() e) CPU1 calls ptep_set_access_flags() If between (d) and (e) the hardware (another CPU) updates the dirty state (clears PTE_RDONLY), CPU1 will override the PTR_RDONLY bit marking the entry clean again. This patch implements an arm64-specific ptep_set_access_flags() function to perform an atomic update of the PTE flags. Fixes: 2f4b829c625e ("arm64: Add support for hardware updates of the access and dirty pte bits") Signed-off-by: Catalin Marinas Reported-by: Ming Lei Tested-by: Julien Grall Cc: Will Deacon [will: reworded comment] Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman