kernel/git/stable/linux.git/arch/arm, branch linux-4.20.y

ARM: dts: exynos: Fix max voltage for buck8 regulator on Odroid XU3/XU4

2019-03-13T21:04:19+00:00

commit a3238924a820c1d7c977b632b769f3b5690cba09 upstream. The maximum voltage value for buck8 regulator on Odroid XU3/XU4 boards is set too low. Increase it to the 2000mV as specified on the board schematic. So far the board worked fine, because of the bug in the PMIC driver, which used incorrect step value for that regulator. It interpreted the voltage value set by the bootloader as 1225mV and kept it unchanged. The regulator driver has been however fixed recently in the commit 56b5d4ea778c ("regulator: s2mps11: Fix steps for buck7, buck8 and LDO35"), what results in reading the proper buck8 value and forcing it to 1500mV on boot. This is not enough for proper board operation and results in eMMC errors during heavy IO traffic. Increasing maximum voltage value for buck8 restores original driver behavior and fixes eMMC issues. Signed-off-by: Marek Szyprowski Fixes: 86a2d2ac5e5d ("ARM: dts: Add dts file for Odroid XU3 board") Fixes: 56b5d4ea778c ("regulator: s2mps11: Fix steps for buck7, buck8 and LDO35") Cc: Signed-off-by: Krzysztof Kozlowski Signed-off-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman

ARM: dts: exynos: Add minimal clkout parameters to Exynos3250 PMU

2019-03-13T21:04:19+00:00

commit a66352e005488ecb4b534ba1af58a9f671eba9b8 upstream. Add minimal parameters needed by the Exynos CLKOUT driver to Exynos3250 PMU node. This fixes the following warning on boot: exynos_clkout_init: failed to register clkout clock Fixes: d19bb397e19e ("ARM: dts: exynos: Update PMU node with CLKOUT related data") Cc: Signed-off-by: Marek Szyprowski Signed-off-by: Krzysztof Kozlowski Signed-off-by: Greg Kroah-Hartman

ARM: dts: exynos: Fix pinctrl definition for eMMC RTSN line on Odroid X2/U3

2019-03-13T21:04:19+00:00

commit ec33745bccc8f336957c751f4153421cc9ef5a54 upstream. Commit 225da7e65a03 ("ARM: dts: add eMMC reset line for exynos4412-odroid-common") added MMC power sequence for eMMC card of Odroid X2/U3. It reused generic sd1_cd pin control configuration node and only disabled pull-up. However that time the pinctrl configuration was not applied during MMC power sequence driver initialization. This has been changed later by commit d97a1e5d7cd2 ("mmc: pwrseq: convert to proper platform device"). It turned out then, that the provided pinctrl configuration is not correct, because the eMMC_RTSN line is being re-configured as 'special function/card detect function for mmc1 controller' not the simple 'output', thus the power sequence driver doesn't really set the pin value. This in effect broke the reboot of Odroid X2/U3 boards. Fix this by providing separate node with eMMC_RTSN pin configuration. Cc: Reported-by: Markus Reichl Suggested-by: Ulf Hansson Fixes: 225da7e65a03 ("ARM: dts: add eMMC reset line for exynos4412-odroid-common") Signed-off-by: Marek Szyprowski Signed-off-by: Krzysztof Kozlowski Signed-off-by: Greg Kroah-Hartman

ARM: dts: am335x-shc.dts: fix wrong cd pin level

2019-03-13T21:04:11+00:00

[ Upstream commit 063c20e12f8bbbc10cabc2413606b140085beb62 ] cd pin on mmc1 is GPIO_ACTIVE_LOW not GPIO_ACTIVE_HIGH Fixes: e63201f19438 ("mmc: omap_hsmmc: Delete platform data GPIO CD and WP") Signed-off-by: Heiko Schocher Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin

ARM: dts: n900: fix mmc1 card detect gpio polarity

2019-03-13T21:04:11+00:00

[ Upstream commit ac9c908eecde3ed252cb1d67fc79b3c1346f76bc ] Wrong polarity of card detect GPIO pin leads to the system not booting from external mmc, if the back cover of N900 is closed. When the cover is open the system boots fine. This wasn't noticed before, because of a bug, which was fixed by commit e63201f19 (mmc: omap_hsmmc: Delete platform data GPIO CD and WP). Kernels up to 4.19 ignored the card detect GPIO from DT. Fixes: e63201f19438 ("mmc: omap_hsmmc: Delete platform data GPIO CD and WP") Signed-off-by: Arthur Demchenkov Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin

ARM: dts: omap3-gta04: Fix graph_port warning

2019-03-13T21:04:11+00:00

[ Upstream commit 5b90df44fd9b415d8c5d11b92746212a63d3c47f ] We're currently getting a warning with make dtbs: arch/arm/boot/dts/omap3-gta04.dtsi:720.7-727.4: Warning (graph_port): /ocp@68000000/dss@48050000/encoder@48050c0 0/port: graph node unit address error, expected "0" Tested-by: H. Nikolaus Schaller Acked-by: Rob Herring Signed-off-by: H. Nikolaus Schaller Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin

ARM: pxa: ssp: unneeded to free devm_ allocated data

2019-03-13T21:04:11+00:00

[ Upstream commit ba16adeb346387eb2d1ada69003588be96f098fa ] devm_ allocated data will be automatically freed. The free of devm_ allocated data is invalid. Fixes: 1c459de1e645 ("ARM: pxa: ssp: use devm_ functions") Signed-off-by: Peng Hao [title's prefix changed] Signed-off-by: Robert Jarzmik Signed-off-by: Sasha Levin

ARM: dts: imx6sx: correct backward compatible of gpt

2019-03-13T21:04:10+00:00

[ Upstream commit ba0f4560526ba19300c07ed5a3c1df7592815dc6 ] i.MX6SX has same GPT type as i.MX6DL, in GPT driver, it uses below TIMER_OF_DECLARE, so the backward compatible should be "fsl,imx6dl-gpt", correct it. TIMER_OF_DECLARE(imx6sx_timer, "fsl,imx6sx-gpt", imx6dl_timer_init_dt); Signed-off-by: Anson Huang Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin

ARM: dts: meson8m2: mxiii-plus: mark the SD card detection GPIO active-low

2019-03-13T21:04:09+00:00

[ Upstream commit 8615f5596335db0978cea593dcd0070dc5f8b116 ] After commit 89a5e15bcba87d ("gpio/mmc/of: Respect polarity in the device tree") SD cards are not detected anymore. The CD GPIO is "active low" on the MXIII-Plus. The MMC dt-bindings specify: "[...] using the "cd-inverted" property means, that the CD line is active high, i.e. it is high, when a card is inserted". Fix the description of the SD card by marking it as GPIO_ACTIVE_LOW and drop the "cd-inverted" property. This makes the definition consistent with the existing dt-bindings and fixes the check whether an SD card is inserted. Fixes: 35ee52bea66c74 ("ARM: dts: meson8m2: add support for the Tronsmart MXIII Plus") Signed-off-by: Martin Blumenstingl Reviewed-by: Linus Walleij Signed-off-by: Kevin Hilman Signed-off-by: Sasha Levin

ARM: dts: meson8b: ec100: mark the SD card detection GPIO active-low

2019-03-13T21:04:09+00:00

[ Upstream commit c8bfe65fb1fb7a43d766df1dfa379406112cba61 ] After commit 89a5e15bcba87d ("gpio/mmc/of: Respect polarity in the device tree") SD cards are not detected anymore. The CD GPIO is "active low" on the EC-100. The MMC dt-bindings specify: "[...] using the "cd-inverted" property means, that the CD line is active high, i.e. it is high, when a card is inserted". Fix the description of the SD card by marking it as GPIO_ACTIVE_LOW and drop the "cd-inverted" property. This makes the definition consistent with the existing dt-bindings and fixes the check whether an SD card is inserted. Fixes: bbedc1f1d90e33 ("ARM: dts: meson8b: Add support for the Endless Mini (EC-100)") Signed-off-by: Martin Blumenstingl Reviewed-by: Linus Walleij Signed-off-by: Kevin Hilman Signed-off-by: Sasha Levin