kernel/git/stable/linux.git/arch/arm, branch linux-5.12.y

ARM: dts: imx6q-dhcom: Add gpios pinctrl for i2c bus recovery

2021-07-20T14:02:26+00:00

[ Upstream commit ddc873cd3c0af4faad6a00bffda21c3f775126dd ] The i2c bus can freeze at the end of transaction so the bus can no longer work. This scenario is improved by adding scl/sda gpios definitions to implement the i2c bus recovery mechanism. Fixes: 52c7a088badd ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2") Signed-off-by: Christoph Niedermaier Cc: Shawn Guo Cc: Fabio Estevam Cc: Marek Vasut Cc: NXP Linux Team Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin

ARM: dts: imx6q-dhcom: Fix ethernet plugin detection problems

2021-07-20T14:02:26+00:00

[ Upstream commit e2bdd3484890441b9cc2560413a86e8f2aa04157 ] To make the ethernet cable plugin detection reliable the power detection of the smsc phy has been disabled. Fixes: 52c7a088badd ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2") Signed-off-by: Christoph Niedermaier Cc: Shawn Guo Cc: Fabio Estevam Cc: Marek Vasut Cc: NXP Linux Team Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin

ARM: dts: imx6q-dhcom: Fix ethernet reset time properties

2021-07-20T14:02:26+00:00

[ Upstream commit c016c26c1631f539c652b5d82242a3ca402545c1 ] Fix ethernet reset time properties as described in Documentation/devicetree/bindings/net/ethernet-phy.yaml Fixes: 52c7a088badd ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2") Signed-off-by: Christoph Niedermaier Cc: Shawn Guo Cc: Fabio Estevam Cc: Marek Vasut Cc: NXP Linux Team Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin

ARM: dts: am437x: align ti,pindir-d0-out-d1-in property with dt-shema

2021-07-20T14:02:26+00:00

[ Upstream commit 9b11fec7345f21995f4ea4bafb0e108b9a620238 ] ti,pindir-d0-out-d1-in property is expected to be of type boolean. Therefore, fix the property accordingly. Fixes: b0b039515445 ("ARM: dts: am43x-epos-evm: set data pin directions for spi0 and spi1") Signed-off-by: Aswath Govindraju Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin

ARM: dts: am335x: align ti,pindir-d0-out-d1-in property with dt-shema

2021-07-20T14:02:26+00:00

[ Upstream commit 414bfe1d26b60ef20b58e36efd5363188a694bab ] ti,pindir-d0-out-d1-in property is expected to be of type boolean. Therefore, fix the property accordingly. Fixes: 444d66fafab8 ("ARM: dts: add spi wifi support to cm-t335") Signed-off-by: Aswath Govindraju Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin

ARM: dts: dra7: Fix duplicate USB4 target module node

2021-07-20T14:02:26+00:00

[ Upstream commit 78b4b165280d3d70e7a217599f0c06a4c0bb11f9 ] With [1] USB4 target-module node got defined in dra74x.dtsi file. However, the earlier definition in [2] was not removed, and this duplication of the target module is causing boot failure on dra74 variant boards - dra7-evm, dra76-evm. USB4 is only present in DRA74x variants, so keeping the entry in dra74x.dtsi and removing it from the top level interconnect hierarchy dra7-l4.dtsi file. This change makes the USB4 target module no longer visible to AM5718, DRA71x and DRA72x so removing references to it in their respective dts files. [1]: commit c7b72abca61ec ("ARM: OMAP2+: Drop legacy platform data for dra7 dwc3") [2]: commit 549fce068a311 ("ARM: dts: dra7: Add l4 interconnect hierarchy and ti-sysc data") Fixes: c7b72abca61ec ("ARM: OMAP2+: Drop legacy platform data for dra7 dwc3") Signed-off-by: Gowtham Tammana Reviewed-by: Grygorii Strashko Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin

Revert "ARM: dts: bcm283x: increase dwc2's RX FIFO size"

2021-07-20T14:02:25+00:00

[ Upstream commit 77daceabedb42482bb6200fa26047c5591716e45 ] This reverts commit 278407a53c3b33fb820332c4d39eb39316c3879a. The original change breaks USB config on Raspberry Pi Zero and Pi 4 B, because it exceeds the total fifo size of 4080. A naive attempt to reduce g-tx-fifo-size doesn't help on Raspberry Pi Zero. So better go back. Fixes: 278407a53c3b ("ARM: dts: bcm283x: increase dwc2's RX FIFO size") Signed-off-by: Stefan Wahren Cc: Pavel Hofman Link: https://lore.kernel.org/r/1622293371-5997-1-git-send-email-stefan.wahren@i2se.com Signed-off-by: Nicolas Saenz Julienne Signed-off-by: Sasha Levin

ARM: dts: BCM5301X: Fixup SPI binding

2021-07-20T14:02:25+00:00

[ Upstream commit d5aede3e6dd1b8ca574600a1ecafe1e580c53f2f ] 1. Reorder interrupts 2. Fix typo: s/spi_lr_overhead/spi_lr_overread/ 3. Rename node: s/spi-nor@0/flash@0/ This fixes: arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dt.yaml: spi@18029200: interrupt-names: 'oneOf' conditional failed, one must be fixed: ['spi_lr_fullness_reached', 'spi_lr_session_aborted', 'spi_lr_impatient', 'spi_lr_session_done', 'spi_lr_overhead', 'mspi_done', 'mspi_halted'] is too long Additional items are not allowed ('spi_lr_session_aborted', 'spi_lr_impatient', 'spi_lr_session_done', 'spi_lr_overhead', 'mspi_done', 'mspi_halted' were unexpected) 'mspi_done' was expected 'spi_l1_intr' was expected 'mspi_halted' was expected 'spi_lr_fullness_reached' was expected 'spi_lr_session_aborted' was expected 'spi_lr_impatient' was expected 'spi_lr_session_done' was expected 'spi_lr_overread' was expected From schema: Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dt.yaml: spi-nor@0: $nodename:0: 'spi-nor@0' does not match '^flash(@.*)?$' From schema: Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml Signed-off-by: Rafał Miłecki Signed-off-by: Florian Fainelli Signed-off-by: Sasha Levin

ARM: dts: stm32: Rework LAN8710Ai PHY reset on DHCOM SoM

2021-07-20T14:02:24+00:00

[ Upstream commit 1cebcf9932ab76102e8cfc555879574693ba8956 ] The Microchip LAN8710Ai PHY requires XTAL1/CLKIN external clock to be enabled when the nRST is toggled according to datasheet Microchip LAN8710A/LAN8710Ai DS00002164B page 35 section 3.8.5.1 Hardware Reset: " A Hardware reset is asserted by driving the nRST input pin low. When driven, nRST should be held low for the minimum time detailed in Section 5.5.3, "Power-On nRST & Configuration Strap Timing," on page 59 to ensure a proper transceiver reset. During a Hardware reset, an external clock must be supplied to the XTAL1/CLKIN signal. " This is accidentally fulfilled in the current setup, where ETHCK_K is used to supply both PHY XTAL1/CLKIN and is also fed back through eth_clk_fb to supply ETHRX clock of the DWMAC. Hence, the DWMAC enables ETHRX clock, that has ETHCK_K as parent, so ETHCK_K clock are also enabled, and then the PHY reset toggles. However, this is not always the case, e.g. in case the PHY XTAL1/CLKIN clock are supplied by some other clock source than ETHCK_K or in case ETHRX clock are not supplied by ETHCK_K. In the later case, ETHCK_K would be kept disabled, while ETHRX clock would be enabled, so the PHY would not be receiving XTAL1/CLKIN clock and the reset would fail. Improve the DT by adding the PHY clock phandle into the PHY node, which then also requires moving the PHY reset GPIO specifier in the same place and that then also requires correct PHY reset GPIO timing, so add that too. A brief note regarding the timing, the datasheet says the reset should stay asserted for at least 100uS and software should wait at least 200nS after deassertion. Set both delays to 500uS which should be plenty. Fixes: 34e0c7847dcf ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board") Signed-off-by: Marek Vasut Cc: Alexandre Torgue Cc: Patrice Chotard Cc: Patrick Delaunay Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue Signed-off-by: Sasha Levin

ARM: dts: r8a7779, marzen: Fix DU clock names

2021-07-20T14:02:24+00:00

[ Upstream commit 6ab8c23096a29b69044209a5925758a6f88bd450 ] "make dtbs_check" complains: arch/arm/boot/dts/r8a7779-marzen.dt.yaml: display@fff80000: clock-names:0: 'du.0' was expected Change the first clock name to match the DT bindings. This has no effect on actual operation, as the Display Unit driver in Linux does not use the first clock name on R-Car H1, but just grabs the first clock. Fixes: 665d79aa47cb3983 ("ARM: shmobile: marzen: Add DU external pixel clock to DT") Signed-off-by: Geert Uytterhoeven Reviewed-by: Laurent Pinchart Link: https://lore.kernel.org/r/9d5e1b371121883b3b3e10a3df43802a29c6a9da.1619699965.git.geert+renesas@glider.be Signed-off-by: Sasha Levin