kernel/git/stable/linux.git/arch/avr32/mm/fault.c, branch master

avr32: remove support for AVR32 architecture

2017-05-01T07:27:15+00:00

This patch drops support for AVR32 architecture from the Linux kernel. The AVR32 architecture is not keeping up with the development of the kernel, and since it shares so much of the drivers with Atmel ARM SoC, it is starting to hinder these drivers to develop swiftly. Also, all AVR32 AP7 SoC processors are end of lifed from Atmel (now Microchip). Finally, the GCC toolchain is stuck at version 4.2.x, and has not received any patches since the last release from Atmel; 4.2.4-atmel.1.1.3.avr32linux.1. When building kernel v4.10, this toolchain is no longer able to properly link the network stack. Haavard and I have came to the conclusion that we feel keeping AVR32 on life support offers more obstacles for Atmel ARMs, than it gives joy to AVR32 users. I also suspect there are very few AVR32 users left today, if anybody at all. Signed-off-by: Hans-Christian Noren Egtvedt Signed-off-by: Håvard Skinnemoen Signed-off-by: Nicolas Ferre Acked-by: Andy Shevchenko Acked-by: Boris Brezillon

avr32: migrate exception table users off module.h and onto extable.h

2016-10-03T06:49:31+00:00

These files were only including module.h for exception table related functions. We've now separated that content out into its own file "extable.h" so now move over to that and avoid all the extra header content in module.h that we don't really need to compile these files. One uses "print_modules" so that prevents us removing module.h in that case, however. Cc: Haavard Skinnemoen Cc: Hans-Christian Egtvedt Signed-off-by: Paul Gortmaker Acked-by: Hans-Christian Noren Egtvedt

mm: do not pass mm_struct into handle_mm_fault

2016-07-26T23:19:19+00:00

We always have vma->vm_mm around. Link: http://lkml.kernel.org/r/1466021202-61880-8-git-send-email-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mm/fault, arch: Use pagefault_disable() to check for disabled pagefaults in the handler

2015-05-19T06:39:15+00:00

Introduce faulthandler_disabled() and use it to check for irq context and disabled pagefaults (via pagefault_disable()) in the pagefault handlers. Please note that we keep the in_atomic() checks in place - to detect whether in irq context (in which case preemption is always properly disabled). In contrast, preempt_disable() should never be used to disable pagefaults. With !CONFIG_PREEMPT_COUNT, preempt_disable() doesn't modify the preempt counter, and therefore the result of in_atomic() differs. We validate that condition by using might_fault() checks when calling might_sleep(). Therefore, add a comment to faulthandler_disabled(), describing why this is needed. faulthandler_disabled() and pagefault_disable() are defined in linux/uaccess.h, so let's properly add that include to all relevant files. This patch is based on a patch from Thomas Gleixner. Reviewed-and-tested-by: Thomas Gleixner Signed-off-by: David Hildenbrand Signed-off-by: Peter Zijlstra (Intel) Cc: David.Laight@ACULAB.COM Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: airlied@linux.ie Cc: akpm@linux-foundation.org Cc: benh@kernel.crashing.org Cc: bigeasy@linutronix.de Cc: borntraeger@de.ibm.com Cc: daniel.vetter@intel.com Cc: heiko.carstens@de.ibm.com Cc: herbert@gondor.apana.org.au Cc: hocko@suse.cz Cc: hughd@google.com Cc: mst@redhat.com Cc: paulus@samba.org Cc: ralf@linux-mips.org Cc: schwidefsky@de.ibm.com Cc: yang.shi@windriver.com Link: http://lkml.kernel.org/r/1431359540-32227-7-git-send-email-dahi@linux.vnet.ibm.com Signed-off-by: Ingo Molnar

vm: add VM_FAULT_SIGSEGV handling support

2015-01-29T18:51:32+00:00

The core VM already knows about VM_FAULT_SIGBUS, but cannot return a "you should SIGSEGV" error, because the SIGSEGV case was generally handled by the caller - usually the architecture fault handler. That results in lots of duplication - all the architecture fault handlers end up doing very similar "look up vma, check permissions, do retries etc" - but it generally works. However, there are cases where the VM actually wants to SIGSEGV, and applications _expect_ SIGSEGV. In particular, when accessing the stack guard page, libsigsegv expects a SIGSEGV. And it usually got one, because the stack growth is handled by that duplicated architecture fault handler. However, when the generic VM layer started propagating the error return from the stack expansion in commit fee7e49d4514 ("mm: propagate error from stack expansion even for guard page"), that now exposed the existing VM_FAULT_SIGBUS result to user space. And user space really expected SIGSEGV, not SIGBUS. To fix that case, we need to add a VM_FAULT_SIGSEGV, and teach all those duplicate architecture fault handlers about it. They all already have the code to handle SIGSEGV, so it's about just tying that new return value to the existing code, but it's all a bit annoying. This is the mindless minimal patch to do this. A more extensive patch would be to try to gather up the mostly shared fault handling logic into one generic helper routine, and long-term we really should do that cleanup. Just from this patch, you can generally see that most architectures just copied (directly or indirectly) the old x86 way of doing things, but in the meantime that original x86 model has been improved to hold the VM semaphore for shorter times etc and to handle VM_FAULT_RETRY and other "newer" things, so it would be a good idea to bring all those improvements to the generic case and teach other architectures about them too. Reported-and-tested-by: Takashi Iwai Tested-by: Jan Engelhardt Acked-by: Heiko Carstens # "s390 still compiles and boots" Cc: linux-arch@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds

arch: mm: pass userspace fault flag to generic fault handler

2013-09-12T22:38:01+00:00

Unlike global OOM handling, memory cgroup code will invoke the OOM killer in any OOM situation because it has no way of telling faults occuring in kernel context - which could be handled more gracefully - from user-triggered faults. Pass a flag that identifies faults originating in user space from the architecture-specific fault handlers to generic code so that memcg OOM handling can be improved. Signed-off-by: Johannes Weiner Reviewed-by: Michal Hocko Cc: David Rientjes Cc: KAMEZAWA Hiroyuki Cc: azurIt Cc: KOSAKI Motohiro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

arch: mm: do not invoke OOM killer on kernel fault OOM

2013-09-12T22:38:01+00:00

Kernel faults are expected to handle OOM conditions gracefully (gup, uaccess etc.), so they should never invoke the OOM killer. Reserve this for faults triggered in user context when it is the only option. Most architectures already do this, fix up the remaining few. Signed-off-by: Johannes Weiner Reviewed-by: Michal Hocko Acked-by: KOSAKI Motohiro Cc: David Rientjes Cc: KAMEZAWA Hiroyuki Cc: azurIt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

readahead: fault retry breaks mmap file read random detection

2012-10-09T07:22:47+00:00

.fault now can retry. The retry can break state machine of .fault. In filemap_fault, if page is miss, ra->mmap_miss is increased. In the second try, since the page is in page cache now, ra->mmap_miss is decreased. And these are done in one fault, so we can't detect random mmap file access. Add a new flag to indicate .fault is tried once. In the second try, skip ra->mmap_miss decreasing. The filemap_fault state machine is ok with it. I only tested x86, didn't test other archs, but looks the change for other archs is obvious, but who knows :) Signed-off-by: Shaohua Li Cc: Rik van Riel Cc: Wu Fengguang Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

avr32/mm/fault.c: port OOM changes to do_page_fault

2012-07-31T00:25:11+00:00

Commits d065bd810b6d ("mm: retry page fault when blocking on disk transfer") and 37b23e0525d3 ("x86,mm: make pagefault killable") introduced changes into the x86 pagefault handler for making the page fault handler retryable as well as killable. These changes reduce the mmap_sem hold time, which is crucial during OOM killer invocation. Port these changes to AVR32. [akpm@linux-foundation.org: fix comment layout] Signed-off-by: Mohd. Faris Signed-off-by: Kautuk Consul Acked-by: Havard Skinnemoen Cc: Hans-Christian Egtvedt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

avr32: invoke oom-killer from page fault

2010-08-10T03:44:58+00:00

As explained in commit 1c0fe6e3bd ("mm: invoke oom-killer from page fault") , we want to call the architecture independent oom killer when getting an unexplained OOM from handle_mm_fault, rather than simply killing current. Signed-off-by: Nick Piggin Acked-by: Haavard Skinnemoen Acked-by: David Rientjes Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds