kernel/git/stable/linux.git/arch/microblaze/mm, branch linux-5.4.y

microblaze: don't treat zero reserved memory regions as error

2024-11-08T15:20:25+00:00

[ Upstream commit 0075df288dd8a7abfe03b3766176c393063591dd ] Before commit 721f4a6526da ("mm/memblock: remove empty dummy entry") the check for non-zero of memblock.reserved.cnt in mmu_init() would always be true either because memblock.reserved.cnt is initialized to 1 or because there were memory reservations earlier. The removal of dummy empty entry in memblock caused this check to fail because now memblock.reserved.cnt is initialized to 0. Remove the check for non-zero of memblock.reserved.cnt because it's perfectly fine to have an empty memblock.reserved array that early in boot. Reported-by: Guenter Roeck Signed-off-by: Mike Rapoport Reviewed-by: Wei Yang Tested-by: Guenter Roeck Link: https://lore.kernel.org/r/20240729053327.4091459-1-rppt@kernel.org Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin

Merge branch 'akpm' (patches from Andrew)

2019-09-24T23:10:23+00:00

Merge updates from Andrew Morton: - a few hot fixes - ocfs2 updates - almost all of -mm (slab-generic, slab, slub, kmemleak, kasan, cleanups, debug, pagecache, memcg, gup, pagemap, memory-hotplug, sparsemem, vmalloc, initialization, z3fold, compaction, mempolicy, oom-kill, hugetlb, migration, thp, mmap, madvise, shmem, zswap, zsmalloc) * emailed patches from Andrew Morton : (132 commits) mm/zsmalloc.c: fix a -Wunused-function warning zswap: do not map same object twice zswap: use movable memory if zpool support allocate movable memory zpool: add malloc_support_movable to zpool_driver shmem: fix obsolete comment in shmem_getpage_gfp() mm/madvise: reduce code duplication in error handling paths mm: mmap: increase sockets maximum memory size pgoff for 32bits mm/mmap.c: refine find_vma_prev() with rb_last() riscv: make mmap allocation top-down by default mips: use generic mmap top-down layout and brk randomization mips: replace arch specific way to determine 32bit task with generic version mips: adjust brk randomization offset to fit generic version mips: use STACK_TOP when computing mmap base address mips: properly account for stack randomization and stack guard gap arm: use generic mmap top-down layout and brk randomization arm: use STACK_TOP when computing mmap base address arm: properly account for stack randomization and stack guard gap arm64, mm: make randomization selected by generic topdown mmap layout arm64, mm: move generic mmap layout functions to mm arm64: consider stack randomization for mmap base only when necessary ...

mm: remove quicklist page table caches

2019-09-24T22:54:09+00:00

Patch series "mm: remove quicklist page table caches". A while ago Nicholas proposed to remove quicklist page table caches [1]. I've rebased his patch on the curren upstream and switched ia64 and sh to use generic versions of PTE allocation. [1] https://lore.kernel.org/linux-mm/20190711030339.20892-1-npiggin@gmail.com This patch (of 3): Remove page table allocator "quicklists". These have been around for a long time, but have not got much traction in the last decade and are only used on ia64 and sh architectures. The numbers in the initial commit look interesting but probably don't apply anymore. If anybody wants to resurrect this it's in the git history, but it's unhelpful to have this code and divergent allocator behaviour for minor archs. Also it might be better to instead make more general improvements to page allocator if this is still so slow. Link: http://lkml.kernel.org/r/1565250728-21721-2-git-send-email-rppt@linux.ibm.com Signed-off-by: Nicholas Piggin Signed-off-by: Mike Rapoport Cc: Tony Luck Cc: Yoshinori Sato Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge tag 'microblaze-v5.4-rc1' of git://git.monstr.eu/linux-2.6-microblaze

2019-09-24T19:49:47+00:00

Pull Microblaze updates from Michal Simek: - clean up reset gpio handler - defconfig updates - add support for 8 byte get_user() - switch to generic dma code * tag 'microblaze-v5.4-rc1' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Switch to standard restart handler microblaze: defconfig synchronization microblaze: Enable Xilinx AXI emac driver by default arch/microblaze: support get_user() of size 8 bytes microblaze: remove ioremap_fullcache microblaze: use the generic dma coherent remap allocator microblaze/nommu: use the generic uncached segment support

microblaze: use the generic dma coherent remap allocator

2019-08-30T09:47:16+00:00

This switches to using common code for the DMA allocations, including potential use of the CMA allocator if configured. Switching to the generic code enables DMA allocations from atomic context, which is required by the DMA API documentation, and also adds various other minor features drivers start relying upon. It also makes sure we have on tested code base for all architectures that require uncached pte bits for coherent DMA allocations. Signed-off-by: Christoph Hellwig Signed-off-by: Michal Simek

microblaze/nommu: use the generic uncached segment support

2019-08-30T09:47:16+00:00

Stop providing our own arch alloc/free hooks for nommu platforms and just expose the segment offset and use the generic dma-direct allocator. Signed-off-by: Christoph Hellwig Signed-off-by: Michal Simek

Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

2019-07-09T04:48:15+00:00

Pull force_sig() argument change from Eric Biederman: "A source of error over the years has been that force_sig has taken a task parameter when it is only safe to use force_sig with the current task. The force_sig function is built for delivering synchronous signals such as SIGSEGV where the userspace application caused a synchronous fault (such as a page fault) and the kernel responded with a signal. Because the name force_sig does not make this clear, and because the force_sig takes a task parameter the function force_sig has been abused for sending other kinds of signals over the years. Slowly those have been fixed when the oopses have been tracked down. This set of changes fixes the remaining abusers of force_sig and carefully rips out the task parameter from force_sig and friends making this kind of error almost impossible in the future" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits) signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus signal: Remove the signal number and task parameters from force_sig_info signal: Factor force_sig_info_to_task out of force_sig_info signal: Generate the siginfo in force_sig signal: Move the computation of force into send_signal and correct it. signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal signal: Remove the task parameter from force_sig_fault signal: Use force_sig_fault_to_task for the two calls that don't deliver to current signal: Explicitly call force_sig_fault on current signal/unicore32: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from ptrace_break signal/nds32: Remove tsk parameter from send_sigtrap signal/riscv: Remove tsk parameter from do_trap signal/sh: Remove tsk parameter from force_sig_info_fault signal/um: Remove task parameter from send_sigtrap signal/x86: Remove task parameter from send_sigtrap signal: Remove task parameter from force_sig_mceerr signal: Remove task parameter from force_sig signal: Remove task parameter from force_sigsegv ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55+00:00

Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Enrico Weigelt Reviewed-by: Kate Stewart Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32+00:00

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman

signal: Remove the task parameter from force_sig_fault

2019-05-29T14:31:43+00:00

As synchronous exceptions really only make sense against the current task (otherwise how are you synchronous) remove the task parameter from from force_sig_fault to make it explicit that is what is going on. The two known exceptions that deliver a synchronous exception to a stopped ptraced task have already been changed to force_sig_fault_to_task. The callers have been changed with the following emacs regular expression (with obvious variations on the architectures that take more arguments) to avoid typos: force_sig_fault[(]\([^,]+\)[,]\([^,]+\)[,]\([^,]+\)[,]\W+current[)] -> force_sig_fault(\1,\2,\3) Signed-off-by: "Eric W. Biederman"