<feed xmlns='http://www.w3.org/2005/Atom'>
<title>kernel/git/stable/linux.git/arch/mips/alchemy, branch linux-3.6.y</title>
<subtitle>Linux kernel stable tree</subtitle>
<id>https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux.git/atom?h=linux-3.6.y</id>
<link rel='self' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux.git/atom?h=linux-3.6.y'/>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux.git/'/>
<updated>2012-08-17T08:57:27+00:00</updated>
<entry>
<title>MIPS: MTX-1: Add udelay to mtx1_pci_idsel</title>
<updated>2012-08-17T08:57:27+00:00</updated>
<author>
<name>Bruno Randolf</name>
<email>br1@einfach.org</email>
</author>
<published>2012-07-12T20:54:05+00:00</published>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=143ec74eb10ac9a8c4357341a03b07ac4f04a761'/>
<id>urn:sha1:143ec74eb10ac9a8c4357341a03b07ac4f04a761</id>
<content type='text'>
Without this udelay(1) PCI idsel does not work correctly on the
"singleboard" (T-Mobile Surfbox) for the MiniPCI device. The result is
that PCI configuration fails and the MiniPCI card is not detected
correctly. Instead of

PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0x40000000-0x4fffffff]
pci_bus 0000:00: root bus resource [io  0x1000-0xffff]
pci 0000:00:03.0: BAR 0: assigned [mem 0x40000000-0x4000ffff]
pci 0000:00:00.0: BAR 0: assigned [mem 0x40010000-0x40010fff]
pci 0000:00:00.1: BAR 0: assigned [mem 0x40011000-0x40011fff]

We see only the CardBus device:

PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0x40000000-0x4fffffff]
pci_bus 0000:00: root bus resource [io  0x1000-0xffff]
pci 0000:00:00.0: BAR 0: assigned [mem 0x40000000-0x40000fff]
pci 0000:00:00.1: BAR 0: assigned [mem 0x40001000-0x40001fff]

Later the device driver shows this error:

ath5k 0000:00:03.0: cannot remap PCI memory region
ath5k: probe of 0000:00:03.0 failed with error -5

I assume that the logic chip which usually supresses the signal to the CardBus
card has some settling time and without the delay it would still let the
Cardbus interfere with the response from the MiniPCI card.

What I cannot explain is why this behaviour shows up now and not in earlier
kernel versions before. Maybe older PCI code was slower?

Signed-off-by: Bruno Randolf &lt;br1@einfach.org&gt;
Cc: linux-mips@linux-mips.org
Cc: manuel.lauss@googlemail.com
Cc: florian@openwrt.org
Patchwork: https://patchwork.linux-mips.org/patch/4087/
Signed-off-by: Ralf Baechle &lt;ralf@linux-mips.org&gt;
</content>
</entry>
<entry>
<title>Merge branches 'next/generic', 'next/alchemy', 'next/bcm63xx', 'next/cavium', 'next/jz4740', 'next/lantiq', 'next/loongson1b' and 'next/netlogic' into mips-for-linux-next</title>
<updated>2012-07-25T14:37:46+00:00</updated>
<author>
<name>Ralf Baechle</name>
<email>ralf@linux-mips.org</email>
</author>
<published>2012-07-25T14:37:46+00:00</published>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=68d8848567ef03eb2c2303173934428d0bf0a531'/>
<id>urn:sha1:68d8848567ef03eb2c2303173934428d0bf0a531</id>
<content type='text'>
</content>
</entry>
<entry>
<title>MIPS: Alchemy: Use kmemdup rather than duplicating its implementation</title>
<updated>2012-07-23T12:55:55+00:00</updated>
<author>
<name>Thomas Meyer</name>
<email>thomas@m3y3r.de</email>
</author>
<published>2011-11-17T22:43:40+00:00</published>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=a6196bab646537f594ef269bf9e1c92fe0e165a6'/>
<id>urn:sha1:a6196bab646537f594ef269bf9e1c92fe0e165a6</id>
<content type='text'>
The semantic patch that makes this change is available
in scripts/coccinelle/api/memdup.cocci.

Signed-off-by: Thomas Meyer &lt;thomas@m3y3r.de&gt;
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/3058/
Signed-off-by: Ralf Baechle &lt;ralf@linux-mips.org&gt;
</content>
</entry>
<entry>
<title>MIPS: Alchemy: use IS_ENABLED() macro</title>
<updated>2012-07-23T12:55:53+00:00</updated>
<author>
<name>Florian Fainelli</name>
<email>florian@openwrt.org</email>
</author>
<published>2012-01-31T17:19:03+00:00</published>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=4bd5a5740e9cb20b63763b8b5dd04a51fba09029'/>
<id>urn:sha1:4bd5a5740e9cb20b63763b8b5dd04a51fba09029</id>
<content type='text'>
Signed-off-by: Florian Fainelli &lt;florian@openwrt.org&gt;
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3331/
Signed-off-by: Ralf Baechle &lt;ralf@linux-mips.org&gt;
</content>
</entry>
<entry>
<title>MIPS: Alchemy: handle db1200 cpld ints as they come in</title>
<updated>2012-07-23T12:53:38+00:00</updated>
<author>
<name>Manuel Lauss</name>
<email>manuel.lauss@googlemail.com</email>
</author>
<published>2012-01-21T17:13:15+00:00</published>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=6c2be5cf1d4e70e98d995f9c403b5fbe7b5f2a80'/>
<id>urn:sha1:6c2be5cf1d4e70e98d995f9c403b5fbe7b5f2a80</id>
<content type='text'>
Remove the loop in the cascade handler and instead unconditionally
handle just the first set interrupt coming from the CPLD.

This gets rid of a lot of spurious interrupts being triggered for
the SMSC91111 ethernet chip especially under high(er) IDE load:
"eth0: spurious interrupt (mask = 0xb3)"

Verified on DB1200 and DB1300.

Signed-off-by: Manuel Lauss &lt;manuel.lauss@googlemail.com&gt;
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3288/
Signed-off-by: Ralf Baechle &lt;ralf@linux-mips.org&gt;
</content>
</entry>
<entry>
<title>MIPS: Alchemy: devboards: kill prom.c</title>
<updated>2012-07-23T12:53:38+00:00</updated>
<author>
<name>Manuel Lauss</name>
<email>manuel.lauss@googlemail.com</email>
</author>
<published>2012-01-21T17:13:14+00:00</published>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=278bf05cf68a6e5e965c85217ddc1318d18fcbf7'/>
<id>urn:sha1:278bf05cf68a6e5e965c85217ddc1318d18fcbf7</id>
<content type='text'>
move contents to already existing platform.c file.

Signed-off-by: Manuel Lauss &lt;manuel.lauss@googlemail.com&gt;
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3287/
Signed-off-by: Ralf Baechle &lt;ralf@linux-mips.org&gt;
</content>
</entry>
<entry>
<title>MIPS: Alchemy: use 64MB RAM as minimum for devboards</title>
<updated>2012-07-23T12:53:37+00:00</updated>
<author>
<name>Manuel Lauss</name>
<email>manuel.lauss@googlemail.com</email>
</author>
<published>2012-01-21T17:13:13+00:00</published>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=3e25f4f243db6495cf57c1fcb3a4c0311a92b203'/>
<id>urn:sha1:3e25f4f243db6495cf57c1fcb3a4c0311a92b203</id>
<content type='text'>
YAMON on all devboards provides the "memsize" envvar; in the unlikely
case that it can't be parsed just assume 64MB, which all boards have
at least.

Signed-off-by: Manuel Lauss &lt;manuel.lauss@googlemail.com&gt;
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3286/
Signed-off-by: Ralf Baechle &lt;ralf@linux-mips.org&gt;
</content>
</entry>
<entry>
<title>Merge tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtd</title>
<updated>2012-06-01T23:55:42+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2012-06-01T23:55:42+00:00</published>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=f5e7e844a571124ffc117d4696787d6afc4fc5ae'/>
<id>urn:sha1:f5e7e844a571124ffc117d4696787d6afc4fc5ae</id>
<content type='text'>
Pull mtd update from David Woodhouse:
 - More robust parsing especially of xattr data in JFFS2
 - Updates to mxc_nand and gpmi drivers to support new boards and device tree
 - Improve consistency of information about ECC strength in NAND devices
 - Clean up partition handling of plat_nand
 - Support NAND drivers without dedicated access to OOB area
 - BCH hardware ECC support for OMAP
 - Other fixes and cleanups, and a few new device IDs

Fixed trivial conflict in drivers/mtd/nand/gpmi-nand/gpmi-nand.c due to
added include files next to each other.

* tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtd: (75 commits)
  mtd: mxc_nand: move ecc strengh setup before nand_scan_tail
  mtd: block2mtd: fix recursive call of mtd_writev
  mtd: gpmi-nand: define ecc.strength
  mtd: of_parts: fix breakage in Kconfig
  mtd: nand: fix scan_read_raw_oob
  mtd: docg3 fix in-middle of blocks reads
  mtd: cfi_cmdset_0002: Slight cleanup of fixup messages
  mtd: add fixup for S29NS512P NOR flash.
  jffs2: allow to complete xattr integrity check on first GC scan
  jffs2: allow to discriminate between recoverable and non-recoverable errors
  mtd: nand: omap: add support for hardware BCH ecc
  ARM: OMAP3: gpmc: add BCH ecc api and modes
  mtd: nand: check the return code of 'read_oob/read_oob_raw'
  mtd: nand: remove 'sndcmd' parameter of 'read_oob/read_oob_raw'
  mtd: m25p80: Add support for Winbond W25Q80BW
  jffs2: get rid of jffs2_sync_super
  jffs2: remove unnecessary GC pass on sync
  jffs2: remove unnecessary GC pass on umount
  jffs2: remove lock_super
  mtd: gpmi: add gpmi support for mx6q
  ...
</content>
</entry>
<entry>
<title>MIPS: Fix several implicit uses of export.h/module.h</title>
<updated>2012-05-15T15:48:50+00:00</updated>
<author>
<name>Paul Gortmaker</name>
<email>paul.gortmaker@windriver.com</email>
</author>
<published>2012-02-29T00:24:46+00:00</published>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=f9ded5692c96bae085713bf25558bd932fefeb7f'/>
<id>urn:sha1:f9ded5692c96bae085713bf25558bd932fefeb7f</id>
<content type='text'>
These will show up as a build failure once we clean up a
misuse of module.h in the mips termios header.

Uses export.h: (EXPORT_SYMBOL)
   arch/mips/cavium-octeon/setup.c
   arch/mips/pmc-sierra/yosemite/setup.c
   arch/mips/rb532/devices.c
   arch/mips/sni/setup.c

Uses module.h: (symbol_get/put)
   arch/mips/alchemy/devboards/db1200.c

Uses module.h: (print_modules)
   arch/mips/kernel/traps.c

Signed-off-by: Paul Gortmaker &lt;paul.gortmaker@windriver.com&gt;
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3448/
Signed-off-by: Ralf Baechle &lt;ralf@linux-mips.org&gt;
</content>
</entry>
<entry>
<title>mips: Use the plat_nand default partition parser</title>
<updated>2012-05-14T03:47:08+00:00</updated>
<author>
<name>H Hartley Sweeten</name>
<email>hartleys@visionengravers.com</email>
</author>
<published>2012-03-28T18:14:00+00:00</published>
<link rel='alternate' type='text/html' href='https://git.rulkc.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=8b62b0877b4e08017341e591fa4c218a791e7a04'/>
<id>urn:sha1:8b62b0877b4e08017341e591fa4c218a791e7a04</id>
<content type='text'>
Use the default partition parser, cmdlinepart, provided by the plat_nand driver.

Signed-off-by: H Hartley Sweeten &lt;hsweeten@visionengravers.com&gt;
Signed-off-by: Artem Bityutskiy &lt;artem.bityutskiy@linux.intel.com&gt;
Signed-off-by: David Woodhouse &lt;David.Woodhouse@intel.com&gt;
</content>
</entry>
</feed>
